| /* |
| * QEMU Block driver for RADOS (Ceph) |
| * |
| * Copyright (C) 2010-2011 Christian Brunner <chb@muc.de>, |
| * Josh Durgin <josh.durgin@dreamhost.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2. See |
| * the COPYING file in the top-level directory. |
| * |
| * Contributions after 2012-01-13 are licensed under the terms of the |
| * GNU GPL, version 2 or (at your option) any later version. |
| */ |
| |
| #include "qemu/osdep.h" |
| |
| #include <rbd/librbd.h> |
| #include "qapi/error.h" |
| #include "qemu/error-report.h" |
| #include "qemu/module.h" |
| #include "qemu/option.h" |
| #include "block/block_int.h" |
| #include "block/qdict.h" |
| #include "crypto/secret.h" |
| #include "qemu/cutils.h" |
| #include "qapi/qmp/qstring.h" |
| #include "qapi/qmp/qdict.h" |
| #include "qapi/qmp/qjson.h" |
| #include "qapi/qmp/qlist.h" |
| #include "qapi/qobject-input-visitor.h" |
| #include "qapi/qapi-visit-block-core.h" |
| |
| /* |
| * When specifying the image filename use: |
| * |
| * rbd:poolname/devicename[@snapshotname][:option1=value1[:option2=value2...]] |
| * |
| * poolname must be the name of an existing rados pool. |
| * |
| * devicename is the name of the rbd image. |
| * |
| * Each option given is used to configure rados, and may be any valid |
| * Ceph option, "id", or "conf". |
| * |
| * The "id" option indicates what user we should authenticate as to |
| * the Ceph cluster. If it is excluded we will use the Ceph default |
| * (normally 'admin'). |
| * |
| * The "conf" option specifies a Ceph configuration file to read. If |
| * it is not specified, we will read from the default Ceph locations |
| * (e.g., /etc/ceph/ceph.conf). To avoid reading _any_ configuration |
| * file, specify conf=/dev/null. |
| * |
| * Configuration values containing :, @, or = can be escaped with a |
| * leading "\". |
| */ |
| |
| /* rbd_aio_discard added in 0.1.2 */ |
| #if LIBRBD_VERSION_CODE >= LIBRBD_VERSION(0, 1, 2) |
| #define LIBRBD_SUPPORTS_DISCARD |
| #else |
| #undef LIBRBD_SUPPORTS_DISCARD |
| #endif |
| |
| #define OBJ_MAX_SIZE (1UL << OBJ_DEFAULT_OBJ_ORDER) |
| |
| #define RBD_MAX_SNAPS 100 |
| |
| /* The LIBRBD_SUPPORTS_IOVEC is defined in librbd.h */ |
| #ifdef LIBRBD_SUPPORTS_IOVEC |
| #define LIBRBD_USE_IOVEC 1 |
| #else |
| #define LIBRBD_USE_IOVEC 0 |
| #endif |
| |
| typedef enum { |
| RBD_AIO_READ, |
| RBD_AIO_WRITE, |
| RBD_AIO_DISCARD, |
| RBD_AIO_FLUSH |
| } RBDAIOCmd; |
| |
| typedef struct RBDAIOCB { |
| BlockAIOCB common; |
| int64_t ret; |
| QEMUIOVector *qiov; |
| char *bounce; |
| RBDAIOCmd cmd; |
| int error; |
| struct BDRVRBDState *s; |
| } RBDAIOCB; |
| |
| typedef struct RADOSCB { |
| RBDAIOCB *acb; |
| struct BDRVRBDState *s; |
| int64_t size; |
| char *buf; |
| int64_t ret; |
| } RADOSCB; |
| |
| typedef struct BDRVRBDState { |
| rados_t cluster; |
| rados_ioctx_t io_ctx; |
| rbd_image_t image; |
| char *image_name; |
| char *snap; |
| uint64_t image_size; |
| } BDRVRBDState; |
| |
| static int qemu_rbd_connect(rados_t *cluster, rados_ioctx_t *io_ctx, |
| BlockdevOptionsRbd *opts, bool cache, |
| const char *keypairs, const char *secretid, |
| Error **errp); |
| |
| static char *qemu_rbd_next_tok(char *src, char delim, char **p) |
| { |
| char *end; |
| |
| *p = NULL; |
| |
| for (end = src; *end; ++end) { |
| if (*end == delim) { |
| break; |
| } |
| if (*end == '\\' && end[1] != '\0') { |
| end++; |
| } |
| } |
| if (*end == delim) { |
| *p = end + 1; |
| *end = '\0'; |
| } |
| return src; |
| } |
| |
| static void qemu_rbd_unescape(char *src) |
| { |
| char *p; |
| |
| for (p = src; *src; ++src, ++p) { |
| if (*src == '\\' && src[1] != '\0') { |
| src++; |
| } |
| *p = *src; |
| } |
| *p = '\0'; |
| } |
| |
| static void qemu_rbd_parse_filename(const char *filename, QDict *options, |
| Error **errp) |
| { |
| const char *start; |
| char *p, *buf; |
| QList *keypairs = NULL; |
| char *found_str; |
| |
| if (!strstart(filename, "rbd:", &start)) { |
| error_setg(errp, "File name must start with 'rbd:'"); |
| return; |
| } |
| |
| buf = g_strdup(start); |
| p = buf; |
| |
| found_str = qemu_rbd_next_tok(p, '/', &p); |
| if (!p) { |
| error_setg(errp, "Pool name is required"); |
| goto done; |
| } |
| qemu_rbd_unescape(found_str); |
| qdict_put_str(options, "pool", found_str); |
| |
| if (strchr(p, '@')) { |
| found_str = qemu_rbd_next_tok(p, '@', &p); |
| qemu_rbd_unescape(found_str); |
| qdict_put_str(options, "image", found_str); |
| |
| found_str = qemu_rbd_next_tok(p, ':', &p); |
| qemu_rbd_unescape(found_str); |
| qdict_put_str(options, "snapshot", found_str); |
| } else { |
| found_str = qemu_rbd_next_tok(p, ':', &p); |
| qemu_rbd_unescape(found_str); |
| qdict_put_str(options, "image", found_str); |
| } |
| if (!p) { |
| goto done; |
| } |
| |
| /* The following are essentially all key/value pairs, and we treat |
| * 'id' and 'conf' a bit special. Key/value pairs may be in any order. */ |
| while (p) { |
| char *name, *value; |
| name = qemu_rbd_next_tok(p, '=', &p); |
| if (!p) { |
| error_setg(errp, "conf option %s has no value", name); |
| break; |
| } |
| |
| qemu_rbd_unescape(name); |
| |
| value = qemu_rbd_next_tok(p, ':', &p); |
| qemu_rbd_unescape(value); |
| |
| if (!strcmp(name, "conf")) { |
| qdict_put_str(options, "conf", value); |
| } else if (!strcmp(name, "id")) { |
| qdict_put_str(options, "user", value); |
| } else { |
| /* |
| * We pass these internally to qemu_rbd_set_keypairs(), so |
| * we can get away with the simpler list of [ "key1", |
| * "value1", "key2", "value2" ] rather than a raw dict |
| * { "key1": "value1", "key2": "value2" } where we can't |
| * guarantee order, or even a more correct but complex |
| * [ { "key1": "value1" }, { "key2": "value2" } ] |
| */ |
| if (!keypairs) { |
| keypairs = qlist_new(); |
| } |
| qlist_append_str(keypairs, name); |
| qlist_append_str(keypairs, value); |
| } |
| } |
| |
| if (keypairs) { |
| qdict_put(options, "=keyvalue-pairs", |
| qobject_to_json(QOBJECT(keypairs))); |
| } |
| |
| done: |
| g_free(buf); |
| qobject_unref(keypairs); |
| return; |
| } |
| |
| |
| static void qemu_rbd_refresh_limits(BlockDriverState *bs, Error **errp) |
| { |
| /* XXX Does RBD support AIO on less than 512-byte alignment? */ |
| bs->bl.request_alignment = 512; |
| } |
| |
| |
| static int qemu_rbd_set_auth(rados_t cluster, BlockdevOptionsRbd *opts, |
| Error **errp) |
| { |
| char *key, *acr; |
| int r; |
| GString *accu; |
| RbdAuthModeList *auth; |
| |
| if (opts->key_secret) { |
| key = qcrypto_secret_lookup_as_base64(opts->key_secret, errp); |
| if (!key) { |
| return -EIO; |
| } |
| r = rados_conf_set(cluster, "key", key); |
| g_free(key); |
| if (r < 0) { |
| error_setg_errno(errp, -r, "Could not set 'key'"); |
| return r; |
| } |
| } |
| |
| if (opts->has_auth_client_required) { |
| accu = g_string_new(""); |
| for (auth = opts->auth_client_required; auth; auth = auth->next) { |
| if (accu->str[0]) { |
| g_string_append_c(accu, ';'); |
| } |
| g_string_append(accu, RbdAuthMode_str(auth->value)); |
| } |
| acr = g_string_free(accu, FALSE); |
| r = rados_conf_set(cluster, "auth_client_required", acr); |
| g_free(acr); |
| if (r < 0) { |
| error_setg_errno(errp, -r, |
| "Could not set 'auth_client_required'"); |
| return r; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int qemu_rbd_set_keypairs(rados_t cluster, const char *keypairs_json, |
| Error **errp) |
| { |
| QList *keypairs; |
| QString *name; |
| QString *value; |
| const char *key; |
| size_t remaining; |
| int ret = 0; |
| |
| if (!keypairs_json) { |
| return ret; |
| } |
| keypairs = qobject_to(QList, |
| qobject_from_json(keypairs_json, &error_abort)); |
| remaining = qlist_size(keypairs) / 2; |
| assert(remaining); |
| |
| while (remaining--) { |
| name = qobject_to(QString, qlist_pop(keypairs)); |
| value = qobject_to(QString, qlist_pop(keypairs)); |
| assert(name && value); |
| key = qstring_get_str(name); |
| |
| ret = rados_conf_set(cluster, key, qstring_get_str(value)); |
| qobject_unref(value); |
| if (ret < 0) { |
| error_setg_errno(errp, -ret, "invalid conf option %s", key); |
| qobject_unref(name); |
| ret = -EINVAL; |
| break; |
| } |
| qobject_unref(name); |
| } |
| |
| qobject_unref(keypairs); |
| return ret; |
| } |
| |
| static void qemu_rbd_memset(RADOSCB *rcb, int64_t offs) |
| { |
| if (LIBRBD_USE_IOVEC) { |
| RBDAIOCB *acb = rcb->acb; |
| iov_memset(acb->qiov->iov, acb->qiov->niov, offs, 0, |
| acb->qiov->size - offs); |
| } else { |
| memset(rcb->buf + offs, 0, rcb->size - offs); |
| } |
| } |
| |
| static QemuOptsList runtime_opts = { |
| .name = "rbd", |
| .head = QTAILQ_HEAD_INITIALIZER(runtime_opts.head), |
| .desc = { |
| { |
| .name = "pool", |
| .type = QEMU_OPT_STRING, |
| .help = "Rados pool name", |
| }, |
| { |
| .name = "image", |
| .type = QEMU_OPT_STRING, |
| .help = "Image name in the pool", |
| }, |
| { |
| .name = "conf", |
| .type = QEMU_OPT_STRING, |
| .help = "Rados config file location", |
| }, |
| { |
| .name = "snapshot", |
| .type = QEMU_OPT_STRING, |
| .help = "Ceph snapshot name", |
| }, |
| { |
| /* maps to 'id' in rados_create() */ |
| .name = "user", |
| .type = QEMU_OPT_STRING, |
| .help = "Rados id name", |
| }, |
| /* |
| * server.* extracted manually, see qemu_rbd_mon_host() |
| */ |
| { /* end of list */ } |
| }, |
| }; |
| |
| /* FIXME Deprecate and remove keypairs or make it available in QMP. */ |
| static int qemu_rbd_do_create(BlockdevCreateOptions *options, |
| const char *keypairs, const char *password_secret, |
| Error **errp) |
| { |
| BlockdevCreateOptionsRbd *opts = &options->u.rbd; |
| rados_t cluster; |
| rados_ioctx_t io_ctx; |
| int obj_order = 0; |
| int ret; |
| |
| assert(options->driver == BLOCKDEV_DRIVER_RBD); |
| if (opts->location->has_snapshot) { |
| error_setg(errp, "Can't use snapshot name for image creation"); |
| return -EINVAL; |
| } |
| |
| if (opts->has_cluster_size) { |
| int64_t objsize = opts->cluster_size; |
| if ((objsize - 1) & objsize) { /* not a power of 2? */ |
| error_setg(errp, "obj size needs to be power of 2"); |
| return -EINVAL; |
| } |
| if (objsize < 4096) { |
| error_setg(errp, "obj size too small"); |
| return -EINVAL; |
| } |
| obj_order = ctz32(objsize); |
| } |
| |
| ret = qemu_rbd_connect(&cluster, &io_ctx, opts->location, false, keypairs, |
| password_secret, errp); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| ret = rbd_create(io_ctx, opts->location->image, opts->size, &obj_order); |
| if (ret < 0) { |
| error_setg_errno(errp, -ret, "error rbd create"); |
| goto out; |
| } |
| |
| ret = 0; |
| out: |
| rados_ioctx_destroy(io_ctx); |
| rados_shutdown(cluster); |
| return ret; |
| } |
| |
| static int qemu_rbd_co_create(BlockdevCreateOptions *options, Error **errp) |
| { |
| return qemu_rbd_do_create(options, NULL, NULL, errp); |
| } |
| |
| static int coroutine_fn qemu_rbd_co_create_opts(const char *filename, |
| QemuOpts *opts, |
| Error **errp) |
| { |
| BlockdevCreateOptions *create_options; |
| BlockdevCreateOptionsRbd *rbd_opts; |
| BlockdevOptionsRbd *loc; |
| Error *local_err = NULL; |
| const char *keypairs, *password_secret; |
| QDict *options = NULL; |
| int ret = 0; |
| |
| create_options = g_new0(BlockdevCreateOptions, 1); |
| create_options->driver = BLOCKDEV_DRIVER_RBD; |
| rbd_opts = &create_options->u.rbd; |
| |
| rbd_opts->location = g_new0(BlockdevOptionsRbd, 1); |
| |
| password_secret = qemu_opt_get(opts, "password-secret"); |
| |
| /* Read out options */ |
| rbd_opts->size = ROUND_UP(qemu_opt_get_size_del(opts, BLOCK_OPT_SIZE, 0), |
| BDRV_SECTOR_SIZE); |
| rbd_opts->cluster_size = qemu_opt_get_size_del(opts, |
| BLOCK_OPT_CLUSTER_SIZE, 0); |
| rbd_opts->has_cluster_size = (rbd_opts->cluster_size != 0); |
| |
| options = qdict_new(); |
| qemu_rbd_parse_filename(filename, options, &local_err); |
| if (local_err) { |
| ret = -EINVAL; |
| error_propagate(errp, local_err); |
| goto exit; |
| } |
| |
| /* |
| * Caution: while qdict_get_try_str() is fine, getting non-string |
| * types would require more care. When @options come from -blockdev |
| * or blockdev_add, its members are typed according to the QAPI |
| * schema, but when they come from -drive, they're all QString. |
| */ |
| loc = rbd_opts->location; |
| loc->pool = g_strdup(qdict_get_try_str(options, "pool")); |
| loc->conf = g_strdup(qdict_get_try_str(options, "conf")); |
| loc->has_conf = !!loc->conf; |
| loc->user = g_strdup(qdict_get_try_str(options, "user")); |
| loc->has_user = !!loc->user; |
| loc->image = g_strdup(qdict_get_try_str(options, "image")); |
| keypairs = qdict_get_try_str(options, "=keyvalue-pairs"); |
| |
| ret = qemu_rbd_do_create(create_options, keypairs, password_secret, errp); |
| if (ret < 0) { |
| goto exit; |
| } |
| |
| exit: |
| qobject_unref(options); |
| qapi_free_BlockdevCreateOptions(create_options); |
| return ret; |
| } |
| |
| /* |
| * This aio completion is being called from rbd_finish_bh() and runs in qemu |
| * BH context. |
| */ |
| static void qemu_rbd_complete_aio(RADOSCB *rcb) |
| { |
| RBDAIOCB *acb = rcb->acb; |
| int64_t r; |
| |
| r = rcb->ret; |
| |
| if (acb->cmd != RBD_AIO_READ) { |
| if (r < 0) { |
| acb->ret = r; |
| acb->error = 1; |
| } else if (!acb->error) { |
| acb->ret = rcb->size; |
| } |
| } else { |
| if (r < 0) { |
| qemu_rbd_memset(rcb, 0); |
| acb->ret = r; |
| acb->error = 1; |
| } else if (r < rcb->size) { |
| qemu_rbd_memset(rcb, r); |
| if (!acb->error) { |
| acb->ret = rcb->size; |
| } |
| } else if (!acb->error) { |
| acb->ret = r; |
| } |
| } |
| |
| g_free(rcb); |
| |
| if (!LIBRBD_USE_IOVEC) { |
| if (acb->cmd == RBD_AIO_READ) { |
| qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size); |
| } |
| qemu_vfree(acb->bounce); |
| } |
| |
| acb->common.cb(acb->common.opaque, (acb->ret > 0 ? 0 : acb->ret)); |
| |
| qemu_aio_unref(acb); |
| } |
| |
| static char *qemu_rbd_mon_host(BlockdevOptionsRbd *opts, Error **errp) |
| { |
| const char **vals; |
| const char *host, *port; |
| char *rados_str; |
| InetSocketAddressBaseList *p; |
| int i, cnt; |
| |
| if (!opts->has_server) { |
| return NULL; |
| } |
| |
| for (cnt = 0, p = opts->server; p; p = p->next) { |
| cnt++; |
| } |
| |
| vals = g_new(const char *, cnt + 1); |
| |
| for (i = 0, p = opts->server; p; p = p->next, i++) { |
| host = p->value->host; |
| port = p->value->port; |
| |
| if (strchr(host, ':')) { |
| vals[i] = g_strdup_printf("[%s]:%s", host, port); |
| } else { |
| vals[i] = g_strdup_printf("%s:%s", host, port); |
| } |
| } |
| vals[i] = NULL; |
| |
| rados_str = i ? g_strjoinv(";", (char **)vals) : NULL; |
| g_strfreev((char **)vals); |
| return rados_str; |
| } |
| |
| static int qemu_rbd_connect(rados_t *cluster, rados_ioctx_t *io_ctx, |
| BlockdevOptionsRbd *opts, bool cache, |
| const char *keypairs, const char *secretid, |
| Error **errp) |
| { |
| char *mon_host = NULL; |
| Error *local_err = NULL; |
| int r; |
| |
| if (secretid) { |
| if (opts->key_secret) { |
| error_setg(errp, |
| "Legacy 'password-secret' clashes with 'key-secret'"); |
| return -EINVAL; |
| } |
| opts->key_secret = g_strdup(secretid); |
| opts->has_key_secret = true; |
| } |
| |
| mon_host = qemu_rbd_mon_host(opts, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| r = -EINVAL; |
| goto failed_opts; |
| } |
| |
| r = rados_create(cluster, opts->user); |
| if (r < 0) { |
| error_setg_errno(errp, -r, "error initializing"); |
| goto failed_opts; |
| } |
| |
| /* try default location when conf=NULL, but ignore failure */ |
| r = rados_conf_read_file(*cluster, opts->conf); |
| if (opts->has_conf && r < 0) { |
| error_setg_errno(errp, -r, "error reading conf file %s", opts->conf); |
| goto failed_shutdown; |
| } |
| |
| r = qemu_rbd_set_keypairs(*cluster, keypairs, errp); |
| if (r < 0) { |
| goto failed_shutdown; |
| } |
| |
| if (mon_host) { |
| r = rados_conf_set(*cluster, "mon_host", mon_host); |
| if (r < 0) { |
| goto failed_shutdown; |
| } |
| } |
| |
| r = qemu_rbd_set_auth(*cluster, opts, errp); |
| if (r < 0) { |
| goto failed_shutdown; |
| } |
| |
| /* |
| * Fallback to more conservative semantics if setting cache |
| * options fails. Ignore errors from setting rbd_cache because the |
| * only possible error is that the option does not exist, and |
| * librbd defaults to no caching. If write through caching cannot |
| * be set up, fall back to no caching. |
| */ |
| if (cache) { |
| rados_conf_set(*cluster, "rbd_cache", "true"); |
| } else { |
| rados_conf_set(*cluster, "rbd_cache", "false"); |
| } |
| |
| r = rados_connect(*cluster); |
| if (r < 0) { |
| error_setg_errno(errp, -r, "error connecting"); |
| goto failed_shutdown; |
| } |
| |
| r = rados_ioctx_create(*cluster, opts->pool, io_ctx); |
| if (r < 0) { |
| error_setg_errno(errp, -r, "error opening pool %s", opts->pool); |
| goto failed_shutdown; |
| } |
| |
| return 0; |
| |
| failed_shutdown: |
| rados_shutdown(*cluster); |
| failed_opts: |
| g_free(mon_host); |
| return r; |
| } |
| |
| static int qemu_rbd_convert_options(QDict *options, BlockdevOptionsRbd **opts, |
| Error **errp) |
| { |
| Visitor *v; |
| Error *local_err = NULL; |
| |
| /* Convert the remaining options into a QAPI object */ |
| v = qobject_input_visitor_new_flat_confused(options, errp); |
| if (!v) { |
| return -EINVAL; |
| } |
| |
| visit_type_BlockdevOptionsRbd(v, NULL, opts, &local_err); |
| visit_free(v); |
| |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int qemu_rbd_attempt_legacy_options(QDict *options, |
| BlockdevOptionsRbd **opts, |
| char **keypairs) |
| { |
| char *filename; |
| int r; |
| |
| filename = g_strdup(qdict_get_try_str(options, "filename")); |
| if (!filename) { |
| return -EINVAL; |
| } |
| qdict_del(options, "filename"); |
| |
| qemu_rbd_parse_filename(filename, options, NULL); |
| |
| /* keypairs freed by caller */ |
| *keypairs = g_strdup(qdict_get_try_str(options, "=keyvalue-pairs")); |
| if (*keypairs) { |
| qdict_del(options, "=keyvalue-pairs"); |
| } |
| |
| r = qemu_rbd_convert_options(options, opts, NULL); |
| |
| g_free(filename); |
| return r; |
| } |
| |
| static int qemu_rbd_open(BlockDriverState *bs, QDict *options, int flags, |
| Error **errp) |
| { |
| BDRVRBDState *s = bs->opaque; |
| BlockdevOptionsRbd *opts = NULL; |
| const QDictEntry *e; |
| Error *local_err = NULL; |
| char *keypairs, *secretid; |
| int r; |
| |
| keypairs = g_strdup(qdict_get_try_str(options, "=keyvalue-pairs")); |
| if (keypairs) { |
| qdict_del(options, "=keyvalue-pairs"); |
| } |
| |
| secretid = g_strdup(qdict_get_try_str(options, "password-secret")); |
| if (secretid) { |
| qdict_del(options, "password-secret"); |
| } |
| |
| r = qemu_rbd_convert_options(options, &opts, &local_err); |
| if (local_err) { |
| /* If keypairs are present, that means some options are present in |
| * the modern option format. Don't attempt to parse legacy option |
| * formats, as we won't support mixed usage. */ |
| if (keypairs) { |
| error_propagate(errp, local_err); |
| goto out; |
| } |
| |
| /* If the initial attempt to convert and process the options failed, |
| * we may be attempting to open an image file that has the rbd options |
| * specified in the older format consisting of all key/value pairs |
| * encoded in the filename. Go ahead and attempt to parse the |
| * filename, and see if we can pull out the required options. */ |
| r = qemu_rbd_attempt_legacy_options(options, &opts, &keypairs); |
| if (r < 0) { |
| /* Propagate the original error, not the legacy parsing fallback |
| * error, as the latter was just a best-effort attempt. */ |
| error_propagate(errp, local_err); |
| goto out; |
| } |
| /* Take care whenever deciding to actually deprecate; once this ability |
| * is removed, we will not be able to open any images with legacy-styled |
| * backing image strings. */ |
| warn_report("RBD options encoded in the filename as keyvalue pairs " |
| "is deprecated"); |
| } |
| |
| /* Remove the processed options from the QDict (the visitor processes |
| * _all_ options in the QDict) */ |
| while ((e = qdict_first(options))) { |
| qdict_del(options, e->key); |
| } |
| |
| r = qemu_rbd_connect(&s->cluster, &s->io_ctx, opts, |
| !(flags & BDRV_O_NOCACHE), keypairs, secretid, errp); |
| if (r < 0) { |
| goto out; |
| } |
| |
| s->snap = g_strdup(opts->snapshot); |
| s->image_name = g_strdup(opts->image); |
| |
| /* rbd_open is always r/w */ |
| r = rbd_open(s->io_ctx, s->image_name, &s->image, s->snap); |
| if (r < 0) { |
| error_setg_errno(errp, -r, "error reading header from %s", |
| s->image_name); |
| goto failed_open; |
| } |
| |
| r = rbd_get_size(s->image, &s->image_size); |
| if (r < 0) { |
| error_setg_errno(errp, -r, "error getting image size from %s", |
| s->image_name); |
| rbd_close(s->image); |
| goto failed_open; |
| } |
| |
| /* If we are using an rbd snapshot, we must be r/o, otherwise |
| * leave as-is */ |
| if (s->snap != NULL) { |
| r = bdrv_apply_auto_read_only(bs, "rbd snapshots are read-only", errp); |
| if (r < 0) { |
| rbd_close(s->image); |
| goto failed_open; |
| } |
| } |
| |
| r = 0; |
| goto out; |
| |
| failed_open: |
| rados_ioctx_destroy(s->io_ctx); |
| g_free(s->snap); |
| g_free(s->image_name); |
| rados_shutdown(s->cluster); |
| out: |
| qapi_free_BlockdevOptionsRbd(opts); |
| g_free(keypairs); |
| g_free(secretid); |
| return r; |
| } |
| |
| |
| /* Since RBD is currently always opened R/W via the API, |
| * we just need to check if we are using a snapshot or not, in |
| * order to determine if we will allow it to be R/W */ |
| static int qemu_rbd_reopen_prepare(BDRVReopenState *state, |
| BlockReopenQueue *queue, Error **errp) |
| { |
| BDRVRBDState *s = state->bs->opaque; |
| int ret = 0; |
| |
| if (s->snap && state->flags & BDRV_O_RDWR) { |
| error_setg(errp, |
| "Cannot change node '%s' to r/w when using RBD snapshot", |
| bdrv_get_device_or_node_name(state->bs)); |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static void qemu_rbd_close(BlockDriverState *bs) |
| { |
| BDRVRBDState *s = bs->opaque; |
| |
| rbd_close(s->image); |
| rados_ioctx_destroy(s->io_ctx); |
| g_free(s->snap); |
| g_free(s->image_name); |
| rados_shutdown(s->cluster); |
| } |
| |
| /* Resize the RBD image and update the 'image_size' with the current size */ |
| static int qemu_rbd_resize(BlockDriverState *bs, uint64_t size) |
| { |
| BDRVRBDState *s = bs->opaque; |
| int r; |
| |
| r = rbd_resize(s->image, size); |
| if (r < 0) { |
| return r; |
| } |
| |
| s->image_size = size; |
| |
| return 0; |
| } |
| |
| static const AIOCBInfo rbd_aiocb_info = { |
| .aiocb_size = sizeof(RBDAIOCB), |
| }; |
| |
| static void rbd_finish_bh(void *opaque) |
| { |
| RADOSCB *rcb = opaque; |
| qemu_rbd_complete_aio(rcb); |
| } |
| |
| /* |
| * This is the callback function for rbd_aio_read and _write |
| * |
| * Note: this function is being called from a non qemu thread so |
| * we need to be careful about what we do here. Generally we only |
| * schedule a BH, and do the rest of the io completion handling |
| * from rbd_finish_bh() which runs in a qemu context. |
| */ |
| static void rbd_finish_aiocb(rbd_completion_t c, RADOSCB *rcb) |
| { |
| RBDAIOCB *acb = rcb->acb; |
| |
| rcb->ret = rbd_aio_get_return_value(c); |
| rbd_aio_release(c); |
| |
| aio_bh_schedule_oneshot(bdrv_get_aio_context(acb->common.bs), |
| rbd_finish_bh, rcb); |
| } |
| |
| static int rbd_aio_discard_wrapper(rbd_image_t image, |
| uint64_t off, |
| uint64_t len, |
| rbd_completion_t comp) |
| { |
| #ifdef LIBRBD_SUPPORTS_DISCARD |
| return rbd_aio_discard(image, off, len, comp); |
| #else |
| return -ENOTSUP; |
| #endif |
| } |
| |
| static int rbd_aio_flush_wrapper(rbd_image_t image, |
| rbd_completion_t comp) |
| { |
| #ifdef LIBRBD_SUPPORTS_AIO_FLUSH |
| return rbd_aio_flush(image, comp); |
| #else |
| return -ENOTSUP; |
| #endif |
| } |
| |
| static BlockAIOCB *rbd_start_aio(BlockDriverState *bs, |
| int64_t off, |
| QEMUIOVector *qiov, |
| int64_t size, |
| BlockCompletionFunc *cb, |
| void *opaque, |
| RBDAIOCmd cmd) |
| { |
| RBDAIOCB *acb; |
| RADOSCB *rcb = NULL; |
| rbd_completion_t c; |
| int r; |
| |
| BDRVRBDState *s = bs->opaque; |
| |
| acb = qemu_aio_get(&rbd_aiocb_info, bs, cb, opaque); |
| acb->cmd = cmd; |
| acb->qiov = qiov; |
| assert(!qiov || qiov->size == size); |
| |
| rcb = g_new(RADOSCB, 1); |
| |
| if (!LIBRBD_USE_IOVEC) { |
| if (cmd == RBD_AIO_DISCARD || cmd == RBD_AIO_FLUSH) { |
| acb->bounce = NULL; |
| } else { |
| acb->bounce = qemu_try_blockalign(bs, qiov->size); |
| if (acb->bounce == NULL) { |
| goto failed; |
| } |
| } |
| if (cmd == RBD_AIO_WRITE) { |
| qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size); |
| } |
| rcb->buf = acb->bounce; |
| } |
| |
| acb->ret = 0; |
| acb->error = 0; |
| acb->s = s; |
| |
| rcb->acb = acb; |
| rcb->s = acb->s; |
| rcb->size = size; |
| r = rbd_aio_create_completion(rcb, (rbd_callback_t) rbd_finish_aiocb, &c); |
| if (r < 0) { |
| goto failed; |
| } |
| |
| switch (cmd) { |
| case RBD_AIO_WRITE: { |
| /* |
| * RBD APIs don't allow us to write more than actual size, so in order |
| * to support growing images, we resize the image before write |
| * operations that exceed the current size. |
| */ |
| if (off + size > s->image_size) { |
| r = qemu_rbd_resize(bs, off + size); |
| if (r < 0) { |
| goto failed_completion; |
| } |
| } |
| #ifdef LIBRBD_SUPPORTS_IOVEC |
| r = rbd_aio_writev(s->image, qiov->iov, qiov->niov, off, c); |
| #else |
| r = rbd_aio_write(s->image, off, size, rcb->buf, c); |
| #endif |
| break; |
| } |
| case RBD_AIO_READ: |
| #ifdef LIBRBD_SUPPORTS_IOVEC |
| r = rbd_aio_readv(s->image, qiov->iov, qiov->niov, off, c); |
| #else |
| r = rbd_aio_read(s->image, off, size, rcb->buf, c); |
| #endif |
| break; |
| case RBD_AIO_DISCARD: |
| r = rbd_aio_discard_wrapper(s->image, off, size, c); |
| break; |
| case RBD_AIO_FLUSH: |
| r = rbd_aio_flush_wrapper(s->image, c); |
| break; |
| default: |
| r = -EINVAL; |
| } |
| |
| if (r < 0) { |
| goto failed_completion; |
| } |
| return &acb->common; |
| |
| failed_completion: |
| rbd_aio_release(c); |
| failed: |
| g_free(rcb); |
| if (!LIBRBD_USE_IOVEC) { |
| qemu_vfree(acb->bounce); |
| } |
| |
| qemu_aio_unref(acb); |
| return NULL; |
| } |
| |
| static BlockAIOCB *qemu_rbd_aio_preadv(BlockDriverState *bs, |
| uint64_t offset, uint64_t bytes, |
| QEMUIOVector *qiov, int flags, |
| BlockCompletionFunc *cb, |
| void *opaque) |
| { |
| return rbd_start_aio(bs, offset, qiov, bytes, cb, opaque, |
| RBD_AIO_READ); |
| } |
| |
| static BlockAIOCB *qemu_rbd_aio_pwritev(BlockDriverState *bs, |
| uint64_t offset, uint64_t bytes, |
| QEMUIOVector *qiov, int flags, |
| BlockCompletionFunc *cb, |
| void *opaque) |
| { |
| return rbd_start_aio(bs, offset, qiov, bytes, cb, opaque, |
| RBD_AIO_WRITE); |
| } |
| |
| #ifdef LIBRBD_SUPPORTS_AIO_FLUSH |
| static BlockAIOCB *qemu_rbd_aio_flush(BlockDriverState *bs, |
| BlockCompletionFunc *cb, |
| void *opaque) |
| { |
| return rbd_start_aio(bs, 0, NULL, 0, cb, opaque, RBD_AIO_FLUSH); |
| } |
| |
| #else |
| |
| static int qemu_rbd_co_flush(BlockDriverState *bs) |
| { |
| #if LIBRBD_VERSION_CODE >= LIBRBD_VERSION(0, 1, 1) |
| /* rbd_flush added in 0.1.1 */ |
| BDRVRBDState *s = bs->opaque; |
| return rbd_flush(s->image); |
| #else |
| return 0; |
| #endif |
| } |
| #endif |
| |
| static int qemu_rbd_getinfo(BlockDriverState *bs, BlockDriverInfo *bdi) |
| { |
| BDRVRBDState *s = bs->opaque; |
| rbd_image_info_t info; |
| int r; |
| |
| r = rbd_stat(s->image, &info, sizeof(info)); |
| if (r < 0) { |
| return r; |
| } |
| |
| bdi->cluster_size = info.obj_size; |
| return 0; |
| } |
| |
| static int64_t qemu_rbd_getlength(BlockDriverState *bs) |
| { |
| BDRVRBDState *s = bs->opaque; |
| rbd_image_info_t info; |
| int r; |
| |
| r = rbd_stat(s->image, &info, sizeof(info)); |
| if (r < 0) { |
| return r; |
| } |
| |
| return info.size; |
| } |
| |
| static int coroutine_fn qemu_rbd_co_truncate(BlockDriverState *bs, |
| int64_t offset, |
| PreallocMode prealloc, |
| Error **errp) |
| { |
| int r; |
| |
| if (prealloc != PREALLOC_MODE_OFF) { |
| error_setg(errp, "Unsupported preallocation mode '%s'", |
| PreallocMode_str(prealloc)); |
| return -ENOTSUP; |
| } |
| |
| r = qemu_rbd_resize(bs, offset); |
| if (r < 0) { |
| error_setg_errno(errp, -r, "Failed to resize file"); |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static int qemu_rbd_snap_create(BlockDriverState *bs, |
| QEMUSnapshotInfo *sn_info) |
| { |
| BDRVRBDState *s = bs->opaque; |
| int r; |
| |
| if (sn_info->name[0] == '\0') { |
| return -EINVAL; /* we need a name for rbd snapshots */ |
| } |
| |
| /* |
| * rbd snapshots are using the name as the user controlled unique identifier |
| * we can't use the rbd snapid for that purpose, as it can't be set |
| */ |
| if (sn_info->id_str[0] != '\0' && |
| strcmp(sn_info->id_str, sn_info->name) != 0) { |
| return -EINVAL; |
| } |
| |
| if (strlen(sn_info->name) >= sizeof(sn_info->id_str)) { |
| return -ERANGE; |
| } |
| |
| r = rbd_snap_create(s->image, sn_info->name); |
| if (r < 0) { |
| error_report("failed to create snap: %s", strerror(-r)); |
| return r; |
| } |
| |
| return 0; |
| } |
| |
| static int qemu_rbd_snap_remove(BlockDriverState *bs, |
| const char *snapshot_id, |
| const char *snapshot_name, |
| Error **errp) |
| { |
| BDRVRBDState *s = bs->opaque; |
| int r; |
| |
| if (!snapshot_name) { |
| error_setg(errp, "rbd need a valid snapshot name"); |
| return -EINVAL; |
| } |
| |
| /* If snapshot_id is specified, it must be equal to name, see |
| qemu_rbd_snap_list() */ |
| if (snapshot_id && strcmp(snapshot_id, snapshot_name)) { |
| error_setg(errp, |
| "rbd do not support snapshot id, it should be NULL or " |
| "equal to snapshot name"); |
| return -EINVAL; |
| } |
| |
| r = rbd_snap_remove(s->image, snapshot_name); |
| if (r < 0) { |
| error_setg_errno(errp, -r, "Failed to remove the snapshot"); |
| } |
| return r; |
| } |
| |
| static int qemu_rbd_snap_rollback(BlockDriverState *bs, |
| const char *snapshot_name) |
| { |
| BDRVRBDState *s = bs->opaque; |
| |
| return rbd_snap_rollback(s->image, snapshot_name); |
| } |
| |
| static int qemu_rbd_snap_list(BlockDriverState *bs, |
| QEMUSnapshotInfo **psn_tab) |
| { |
| BDRVRBDState *s = bs->opaque; |
| QEMUSnapshotInfo *sn_info, *sn_tab = NULL; |
| int i, snap_count; |
| rbd_snap_info_t *snaps; |
| int max_snaps = RBD_MAX_SNAPS; |
| |
| do { |
| snaps = g_new(rbd_snap_info_t, max_snaps); |
| snap_count = rbd_snap_list(s->image, snaps, &max_snaps); |
| if (snap_count <= 0) { |
| g_free(snaps); |
| } |
| } while (snap_count == -ERANGE); |
| |
| if (snap_count <= 0) { |
| goto done; |
| } |
| |
| sn_tab = g_new0(QEMUSnapshotInfo, snap_count); |
| |
| for (i = 0; i < snap_count; i++) { |
| const char *snap_name = snaps[i].name; |
| |
| sn_info = sn_tab + i; |
| pstrcpy(sn_info->id_str, sizeof(sn_info->id_str), snap_name); |
| pstrcpy(sn_info->name, sizeof(sn_info->name), snap_name); |
| |
| sn_info->vm_state_size = snaps[i].size; |
| sn_info->date_sec = 0; |
| sn_info->date_nsec = 0; |
| sn_info->vm_clock_nsec = 0; |
| } |
| rbd_snap_list_end(snaps); |
| g_free(snaps); |
| |
| done: |
| *psn_tab = sn_tab; |
| return snap_count; |
| } |
| |
| #ifdef LIBRBD_SUPPORTS_DISCARD |
| static BlockAIOCB *qemu_rbd_aio_pdiscard(BlockDriverState *bs, |
| int64_t offset, |
| int bytes, |
| BlockCompletionFunc *cb, |
| void *opaque) |
| { |
| return rbd_start_aio(bs, offset, NULL, bytes, cb, opaque, |
| RBD_AIO_DISCARD); |
| } |
| #endif |
| |
| #ifdef LIBRBD_SUPPORTS_INVALIDATE |
| static void coroutine_fn qemu_rbd_co_invalidate_cache(BlockDriverState *bs, |
| Error **errp) |
| { |
| BDRVRBDState *s = bs->opaque; |
| int r = rbd_invalidate_cache(s->image); |
| if (r < 0) { |
| error_setg_errno(errp, -r, "Failed to invalidate the cache"); |
| } |
| } |
| #endif |
| |
| static QemuOptsList qemu_rbd_create_opts = { |
| .name = "rbd-create-opts", |
| .head = QTAILQ_HEAD_INITIALIZER(qemu_rbd_create_opts.head), |
| .desc = { |
| { |
| .name = BLOCK_OPT_SIZE, |
| .type = QEMU_OPT_SIZE, |
| .help = "Virtual disk size" |
| }, |
| { |
| .name = BLOCK_OPT_CLUSTER_SIZE, |
| .type = QEMU_OPT_SIZE, |
| .help = "RBD object size" |
| }, |
| { |
| .name = "password-secret", |
| .type = QEMU_OPT_STRING, |
| .help = "ID of secret providing the password", |
| }, |
| { /* end of list */ } |
| } |
| }; |
| |
| static const char *const qemu_rbd_strong_runtime_opts[] = { |
| "pool", |
| "image", |
| "conf", |
| "snapshot", |
| "user", |
| "server.", |
| "password-secret", |
| |
| NULL |
| }; |
| |
| static BlockDriver bdrv_rbd = { |
| .format_name = "rbd", |
| .instance_size = sizeof(BDRVRBDState), |
| .bdrv_parse_filename = qemu_rbd_parse_filename, |
| .bdrv_refresh_limits = qemu_rbd_refresh_limits, |
| .bdrv_file_open = qemu_rbd_open, |
| .bdrv_close = qemu_rbd_close, |
| .bdrv_reopen_prepare = qemu_rbd_reopen_prepare, |
| .bdrv_co_create = qemu_rbd_co_create, |
| .bdrv_co_create_opts = qemu_rbd_co_create_opts, |
| .bdrv_has_zero_init = bdrv_has_zero_init_1, |
| .bdrv_get_info = qemu_rbd_getinfo, |
| .create_opts = &qemu_rbd_create_opts, |
| .bdrv_getlength = qemu_rbd_getlength, |
| .bdrv_co_truncate = qemu_rbd_co_truncate, |
| .protocol_name = "rbd", |
| |
| .bdrv_aio_preadv = qemu_rbd_aio_preadv, |
| .bdrv_aio_pwritev = qemu_rbd_aio_pwritev, |
| |
| #ifdef LIBRBD_SUPPORTS_AIO_FLUSH |
| .bdrv_aio_flush = qemu_rbd_aio_flush, |
| #else |
| .bdrv_co_flush_to_disk = qemu_rbd_co_flush, |
| #endif |
| |
| #ifdef LIBRBD_SUPPORTS_DISCARD |
| .bdrv_aio_pdiscard = qemu_rbd_aio_pdiscard, |
| #endif |
| |
| .bdrv_snapshot_create = qemu_rbd_snap_create, |
| .bdrv_snapshot_delete = qemu_rbd_snap_remove, |
| .bdrv_snapshot_list = qemu_rbd_snap_list, |
| .bdrv_snapshot_goto = qemu_rbd_snap_rollback, |
| #ifdef LIBRBD_SUPPORTS_INVALIDATE |
| .bdrv_co_invalidate_cache = qemu_rbd_co_invalidate_cache, |
| #endif |
| |
| .strong_runtime_opts = qemu_rbd_strong_runtime_opts, |
| }; |
| |
| static void bdrv_rbd_init(void) |
| { |
| bdrv_register(&bdrv_rbd); |
| } |
| |
| block_init(bdrv_rbd_init); |