| /* |
| * QEMU PowerPC E500 embedded processors pci controller emulation |
| * |
| * Copyright (C) 2009 Freescale Semiconductor, Inc. All rights reserved. |
| * |
| * Author: Yu Liu, <yu.liu@freescale.com> |
| * |
| * This file is derived from hw/ppc4xx_pci.c, |
| * the copyright for that material belongs to the original owners. |
| * |
| * This is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/irq.h" |
| #include "hw/ppc/e500-ccsr.h" |
| #include "hw/qdev-properties.h" |
| #include "migration/vmstate.h" |
| #include "hw/pci/pci.h" |
| #include "hw/pci/pci_host.h" |
| #include "qemu/bswap.h" |
| #include "qemu/module.h" |
| #include "hw/pci-host/ppce500.h" |
| |
| #ifdef DEBUG_PCI |
| #define pci_debug(fmt, ...) fprintf(stderr, fmt, ## __VA_ARGS__) |
| #else |
| #define pci_debug(fmt, ...) |
| #endif |
| |
| #define PCIE500_CFGADDR 0x0 |
| #define PCIE500_CFGDATA 0x4 |
| #define PCIE500_REG_BASE 0xC00 |
| #define PCIE500_ALL_SIZE 0x1000 |
| #define PCIE500_REG_SIZE (PCIE500_ALL_SIZE - PCIE500_REG_BASE) |
| |
| #define PCIE500_PCI_IOLEN 0x10000ULL |
| |
| #define PPCE500_PCI_CONFIG_ADDR 0x0 |
| #define PPCE500_PCI_CONFIG_DATA 0x4 |
| #define PPCE500_PCI_INTACK 0x8 |
| |
| #define PPCE500_PCI_OW1 (0xC20 - PCIE500_REG_BASE) |
| #define PPCE500_PCI_OW2 (0xC40 - PCIE500_REG_BASE) |
| #define PPCE500_PCI_OW3 (0xC60 - PCIE500_REG_BASE) |
| #define PPCE500_PCI_OW4 (0xC80 - PCIE500_REG_BASE) |
| #define PPCE500_PCI_IW3 (0xDA0 - PCIE500_REG_BASE) |
| #define PPCE500_PCI_IW2 (0xDC0 - PCIE500_REG_BASE) |
| #define PPCE500_PCI_IW1 (0xDE0 - PCIE500_REG_BASE) |
| |
| #define PPCE500_PCI_GASKET_TIMR (0xE20 - PCIE500_REG_BASE) |
| |
| #define PCI_POTAR 0x0 |
| #define PCI_POTEAR 0x4 |
| #define PCI_POWBAR 0x8 |
| #define PCI_POWAR 0x10 |
| |
| #define PCI_PITAR 0x0 |
| #define PCI_PIWBAR 0x8 |
| #define PCI_PIWBEAR 0xC |
| #define PCI_PIWAR 0x10 |
| |
| #define PPCE500_PCI_NR_POBS 5 |
| #define PPCE500_PCI_NR_PIBS 3 |
| |
| #define PIWAR_EN 0x80000000 /* Enable */ |
| #define PIWAR_PF 0x20000000 /* prefetch */ |
| #define PIWAR_TGI_LOCAL 0x00f00000 /* target - local memory */ |
| #define PIWAR_READ_SNOOP 0x00050000 |
| #define PIWAR_WRITE_SNOOP 0x00005000 |
| #define PIWAR_SZ_MASK 0x0000003f |
| |
| struct pci_outbound { |
| uint32_t potar; |
| uint32_t potear; |
| uint32_t powbar; |
| uint32_t powar; |
| MemoryRegion mem; |
| }; |
| |
| struct pci_inbound { |
| uint32_t pitar; |
| uint32_t piwbar; |
| uint32_t piwbear; |
| uint32_t piwar; |
| MemoryRegion mem; |
| }; |
| |
| #define TYPE_PPC_E500_PCI_HOST_BRIDGE "e500-pcihost" |
| |
| #define PPC_E500_PCI_HOST_BRIDGE(obj) \ |
| OBJECT_CHECK(PPCE500PCIState, (obj), TYPE_PPC_E500_PCI_HOST_BRIDGE) |
| |
| struct PPCE500PCIState { |
| PCIHostState parent_obj; |
| |
| struct pci_outbound pob[PPCE500_PCI_NR_POBS]; |
| struct pci_inbound pib[PPCE500_PCI_NR_PIBS]; |
| uint32_t gasket_time; |
| qemu_irq irq[PCI_NUM_PINS]; |
| uint32_t irq_num[PCI_NUM_PINS]; |
| uint32_t first_slot; |
| uint32_t first_pin_irq; |
| AddressSpace bm_as; |
| MemoryRegion bm; |
| /* mmio maps */ |
| MemoryRegion container; |
| MemoryRegion iomem; |
| MemoryRegion pio; |
| MemoryRegion busmem; |
| }; |
| |
| #define TYPE_PPC_E500_PCI_BRIDGE "e500-host-bridge" |
| #define PPC_E500_PCI_BRIDGE(obj) \ |
| OBJECT_CHECK(PPCE500PCIBridgeState, (obj), TYPE_PPC_E500_PCI_BRIDGE) |
| |
| struct PPCE500PCIBridgeState { |
| /*< private >*/ |
| PCIDevice parent; |
| /*< public >*/ |
| |
| MemoryRegion bar0; |
| }; |
| |
| typedef struct PPCE500PCIBridgeState PPCE500PCIBridgeState; |
| typedef struct PPCE500PCIState PPCE500PCIState; |
| |
| static uint64_t pci_reg_read4(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| PPCE500PCIState *pci = opaque; |
| unsigned long win; |
| uint32_t value = 0; |
| int idx; |
| |
| win = addr & 0xfe0; |
| |
| switch (win) { |
| case PPCE500_PCI_OW1: |
| case PPCE500_PCI_OW2: |
| case PPCE500_PCI_OW3: |
| case PPCE500_PCI_OW4: |
| idx = (addr >> 5) & 0x7; |
| switch (addr & 0x1F) { |
| case PCI_POTAR: |
| value = pci->pob[idx].potar; |
| break; |
| case PCI_POTEAR: |
| value = pci->pob[idx].potear; |
| break; |
| case PCI_POWBAR: |
| value = pci->pob[idx].powbar; |
| break; |
| case PCI_POWAR: |
| value = pci->pob[idx].powar; |
| break; |
| default: |
| break; |
| } |
| break; |
| |
| case PPCE500_PCI_IW3: |
| case PPCE500_PCI_IW2: |
| case PPCE500_PCI_IW1: |
| idx = ((addr >> 5) & 0x3) - 1; |
| switch (addr & 0x1F) { |
| case PCI_PITAR: |
| value = pci->pib[idx].pitar; |
| break; |
| case PCI_PIWBAR: |
| value = pci->pib[idx].piwbar; |
| break; |
| case PCI_PIWBEAR: |
| value = pci->pib[idx].piwbear; |
| break; |
| case PCI_PIWAR: |
| value = pci->pib[idx].piwar; |
| break; |
| default: |
| break; |
| }; |
| break; |
| |
| case PPCE500_PCI_GASKET_TIMR: |
| value = pci->gasket_time; |
| break; |
| |
| default: |
| break; |
| } |
| |
| pci_debug("%s: win:%lx(addr:" TARGET_FMT_plx ") -> value:%x\n", __func__, |
| win, addr, value); |
| return value; |
| } |
| |
| /* DMA mapping */ |
| static void e500_update_piw(PPCE500PCIState *pci, int idx) |
| { |
| uint64_t tar = ((uint64_t)pci->pib[idx].pitar) << 12; |
| uint64_t wbar = ((uint64_t)pci->pib[idx].piwbar) << 12; |
| uint64_t war = pci->pib[idx].piwar; |
| uint64_t size = 2ULL << (war & PIWAR_SZ_MASK); |
| MemoryRegion *address_space_mem = get_system_memory(); |
| MemoryRegion *mem = &pci->pib[idx].mem; |
| MemoryRegion *bm = &pci->bm; |
| char *name; |
| |
| if (memory_region_is_mapped(mem)) { |
| /* Before we modify anything, unmap and destroy the region */ |
| memory_region_del_subregion(bm, mem); |
| object_unparent(OBJECT(mem)); |
| } |
| |
| if (!(war & PIWAR_EN)) { |
| /* Not enabled, nothing to do */ |
| return; |
| } |
| |
| name = g_strdup_printf("PCI Inbound Window %d", idx); |
| memory_region_init_alias(mem, OBJECT(pci), name, address_space_mem, tar, |
| size); |
| memory_region_add_subregion_overlap(bm, wbar, mem, -1); |
| g_free(name); |
| |
| pci_debug("%s: Added window of size=%#lx from PCI=%#lx to CPU=%#lx\n", |
| __func__, size, wbar, tar); |
| } |
| |
| /* BAR mapping */ |
| static void e500_update_pow(PPCE500PCIState *pci, int idx) |
| { |
| uint64_t tar = ((uint64_t)pci->pob[idx].potar) << 12; |
| uint64_t wbar = ((uint64_t)pci->pob[idx].powbar) << 12; |
| uint64_t war = pci->pob[idx].powar; |
| uint64_t size = 2ULL << (war & PIWAR_SZ_MASK); |
| MemoryRegion *mem = &pci->pob[idx].mem; |
| MemoryRegion *address_space_mem = get_system_memory(); |
| char *name; |
| |
| if (memory_region_is_mapped(mem)) { |
| /* Before we modify anything, unmap and destroy the region */ |
| memory_region_del_subregion(address_space_mem, mem); |
| object_unparent(OBJECT(mem)); |
| } |
| |
| if (!(war & PIWAR_EN)) { |
| /* Not enabled, nothing to do */ |
| return; |
| } |
| |
| name = g_strdup_printf("PCI Outbound Window %d", idx); |
| memory_region_init_alias(mem, OBJECT(pci), name, &pci->busmem, tar, |
| size); |
| memory_region_add_subregion(address_space_mem, wbar, mem); |
| g_free(name); |
| |
| pci_debug("%s: Added window of size=%#lx from CPU=%#lx to PCI=%#lx\n", |
| __func__, size, wbar, tar); |
| } |
| |
| static void pci_reg_write4(void *opaque, hwaddr addr, |
| uint64_t value, unsigned size) |
| { |
| PPCE500PCIState *pci = opaque; |
| unsigned long win; |
| int idx; |
| |
| win = addr & 0xfe0; |
| |
| pci_debug("%s: value:%x -> win:%lx(addr:" TARGET_FMT_plx ")\n", |
| __func__, (unsigned)value, win, addr); |
| |
| switch (win) { |
| case PPCE500_PCI_OW1: |
| case PPCE500_PCI_OW2: |
| case PPCE500_PCI_OW3: |
| case PPCE500_PCI_OW4: |
| idx = (addr >> 5) & 0x7; |
| switch (addr & 0x1F) { |
| case PCI_POTAR: |
| pci->pob[idx].potar = value; |
| e500_update_pow(pci, idx); |
| break; |
| case PCI_POTEAR: |
| pci->pob[idx].potear = value; |
| e500_update_pow(pci, idx); |
| break; |
| case PCI_POWBAR: |
| pci->pob[idx].powbar = value; |
| e500_update_pow(pci, idx); |
| break; |
| case PCI_POWAR: |
| pci->pob[idx].powar = value; |
| e500_update_pow(pci, idx); |
| break; |
| default: |
| break; |
| }; |
| break; |
| |
| case PPCE500_PCI_IW3: |
| case PPCE500_PCI_IW2: |
| case PPCE500_PCI_IW1: |
| idx = ((addr >> 5) & 0x3) - 1; |
| switch (addr & 0x1F) { |
| case PCI_PITAR: |
| pci->pib[idx].pitar = value; |
| e500_update_piw(pci, idx); |
| break; |
| case PCI_PIWBAR: |
| pci->pib[idx].piwbar = value; |
| e500_update_piw(pci, idx); |
| break; |
| case PCI_PIWBEAR: |
| pci->pib[idx].piwbear = value; |
| e500_update_piw(pci, idx); |
| break; |
| case PCI_PIWAR: |
| pci->pib[idx].piwar = value; |
| e500_update_piw(pci, idx); |
| break; |
| default: |
| break; |
| }; |
| break; |
| |
| case PPCE500_PCI_GASKET_TIMR: |
| pci->gasket_time = value; |
| break; |
| |
| default: |
| break; |
| }; |
| } |
| |
| static const MemoryRegionOps e500_pci_reg_ops = { |
| .read = pci_reg_read4, |
| .write = pci_reg_write4, |
| .endianness = DEVICE_BIG_ENDIAN, |
| }; |
| |
| static int mpc85xx_pci_map_irq(PCIDevice *pci_dev, int pin) |
| { |
| int devno = pci_dev->devfn >> 3; |
| int ret; |
| |
| ret = ppce500_pci_map_irq_slot(devno, pin); |
| |
| pci_debug("%s: devfn %x irq %d -> %d devno:%x\n", __func__, |
| pci_dev->devfn, pin, ret, devno); |
| |
| return ret; |
| } |
| |
| static void mpc85xx_pci_set_irq(void *opaque, int pin, int level) |
| { |
| PPCE500PCIState *s = opaque; |
| qemu_irq *pic = s->irq; |
| |
| pci_debug("%s: PCI irq %d, level:%d\n", __func__, pin , level); |
| |
| qemu_set_irq(pic[pin], level); |
| } |
| |
| static PCIINTxRoute e500_route_intx_pin_to_irq(void *opaque, int pin) |
| { |
| PCIINTxRoute route; |
| PPCE500PCIState *s = opaque; |
| |
| route.mode = PCI_INTX_ENABLED; |
| route.irq = s->irq_num[pin]; |
| |
| pci_debug("%s: PCI irq-pin = %d, irq_num= %d\n", __func__, pin, route.irq); |
| return route; |
| } |
| |
| static const VMStateDescription vmstate_pci_outbound = { |
| .name = "pci_outbound", |
| .version_id = 0, |
| .minimum_version_id = 0, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32(potar, struct pci_outbound), |
| VMSTATE_UINT32(potear, struct pci_outbound), |
| VMSTATE_UINT32(powbar, struct pci_outbound), |
| VMSTATE_UINT32(powar, struct pci_outbound), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription vmstate_pci_inbound = { |
| .name = "pci_inbound", |
| .version_id = 0, |
| .minimum_version_id = 0, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32(pitar, struct pci_inbound), |
| VMSTATE_UINT32(piwbar, struct pci_inbound), |
| VMSTATE_UINT32(piwbear, struct pci_inbound), |
| VMSTATE_UINT32(piwar, struct pci_inbound), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription vmstate_ppce500_pci = { |
| .name = "ppce500_pci", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_STRUCT_ARRAY(pob, PPCE500PCIState, PPCE500_PCI_NR_POBS, 1, |
| vmstate_pci_outbound, struct pci_outbound), |
| VMSTATE_STRUCT_ARRAY(pib, PPCE500PCIState, PPCE500_PCI_NR_PIBS, 1, |
| vmstate_pci_inbound, struct pci_inbound), |
| VMSTATE_UINT32(gasket_time, PPCE500PCIState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| #include "exec/address-spaces.h" |
| |
| static void e500_pcihost_bridge_realize(PCIDevice *d, Error **errp) |
| { |
| PPCE500PCIBridgeState *b = PPC_E500_PCI_BRIDGE(d); |
| PPCE500CCSRState *ccsr = CCSR(container_get(qdev_get_machine(), |
| "/e500-ccsr")); |
| |
| memory_region_init_alias(&b->bar0, OBJECT(ccsr), "e500-pci-bar0", &ccsr->ccsr_space, |
| 0, int128_get64(ccsr->ccsr_space.size)); |
| pci_register_bar(d, 0, PCI_BASE_ADDRESS_SPACE_MEMORY, &b->bar0); |
| } |
| |
| static AddressSpace *e500_pcihost_set_iommu(PCIBus *bus, void *opaque, |
| int devfn) |
| { |
| PPCE500PCIState *s = opaque; |
| |
| return &s->bm_as; |
| } |
| |
| static void e500_pcihost_realize(DeviceState *dev, Error **errp) |
| { |
| SysBusDevice *sbd = SYS_BUS_DEVICE(dev); |
| PCIHostState *h; |
| PPCE500PCIState *s; |
| PCIBus *b; |
| int i; |
| |
| h = PCI_HOST_BRIDGE(dev); |
| s = PPC_E500_PCI_HOST_BRIDGE(dev); |
| |
| for (i = 0; i < ARRAY_SIZE(s->irq); i++) { |
| sysbus_init_irq(sbd, &s->irq[i]); |
| } |
| |
| for (i = 0; i < PCI_NUM_PINS; i++) { |
| s->irq_num[i] = s->first_pin_irq + i; |
| } |
| |
| memory_region_init(&s->pio, OBJECT(s), "pci-pio", PCIE500_PCI_IOLEN); |
| memory_region_init(&s->busmem, OBJECT(s), "pci bus memory", UINT64_MAX); |
| |
| /* PIO lives at the bottom of our bus space */ |
| memory_region_add_subregion_overlap(&s->busmem, 0, &s->pio, -2); |
| |
| b = pci_register_root_bus(dev, NULL, mpc85xx_pci_set_irq, |
| mpc85xx_pci_map_irq, s, &s->busmem, &s->pio, |
| PCI_DEVFN(s->first_slot, 0), 4, TYPE_PCI_BUS); |
| h->bus = b; |
| |
| /* Set up PCI view of memory */ |
| memory_region_init(&s->bm, OBJECT(s), "bm-e500", UINT64_MAX); |
| memory_region_add_subregion(&s->bm, 0x0, &s->busmem); |
| address_space_init(&s->bm_as, &s->bm, "pci-bm"); |
| pci_setup_iommu(b, e500_pcihost_set_iommu, s); |
| |
| pci_create_simple(b, 0, "e500-host-bridge"); |
| |
| memory_region_init(&s->container, OBJECT(h), "pci-container", PCIE500_ALL_SIZE); |
| memory_region_init_io(&h->conf_mem, OBJECT(h), &pci_host_conf_be_ops, h, |
| "pci-conf-idx", 4); |
| memory_region_init_io(&h->data_mem, OBJECT(h), &pci_host_data_le_ops, h, |
| "pci-conf-data", 4); |
| memory_region_init_io(&s->iomem, OBJECT(s), &e500_pci_reg_ops, s, |
| "pci.reg", PCIE500_REG_SIZE); |
| memory_region_add_subregion(&s->container, PCIE500_CFGADDR, &h->conf_mem); |
| memory_region_add_subregion(&s->container, PCIE500_CFGDATA, &h->data_mem); |
| memory_region_add_subregion(&s->container, PCIE500_REG_BASE, &s->iomem); |
| sysbus_init_mmio(sbd, &s->container); |
| pci_bus_set_route_irq_fn(b, e500_route_intx_pin_to_irq); |
| } |
| |
| static void e500_host_bridge_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| k->realize = e500_pcihost_bridge_realize; |
| k->vendor_id = PCI_VENDOR_ID_FREESCALE; |
| k->device_id = PCI_DEVICE_ID_MPC8533E; |
| k->class_id = PCI_CLASS_PROCESSOR_POWERPC; |
| dc->desc = "Host bridge"; |
| /* |
| * PCI-facing part of the host bridge, not usable without the |
| * host-facing part, which can't be device_add'ed, yet. |
| */ |
| dc->user_creatable = false; |
| } |
| |
| static const TypeInfo e500_host_bridge_info = { |
| .name = "e500-host-bridge", |
| .parent = TYPE_PCI_DEVICE, |
| .instance_size = sizeof(PPCE500PCIBridgeState), |
| .class_init = e500_host_bridge_class_init, |
| .interfaces = (InterfaceInfo[]) { |
| { INTERFACE_CONVENTIONAL_PCI_DEVICE }, |
| { }, |
| }, |
| }; |
| |
| static Property pcihost_properties[] = { |
| DEFINE_PROP_UINT32("first_slot", PPCE500PCIState, first_slot, 0x11), |
| DEFINE_PROP_UINT32("first_pin_irq", PPCE500PCIState, first_pin_irq, 0x1), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void e500_pcihost_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = e500_pcihost_realize; |
| set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); |
| device_class_set_props(dc, pcihost_properties); |
| dc->vmsd = &vmstate_ppce500_pci; |
| } |
| |
| static const TypeInfo e500_pcihost_info = { |
| .name = TYPE_PPC_E500_PCI_HOST_BRIDGE, |
| .parent = TYPE_PCI_HOST_BRIDGE, |
| .instance_size = sizeof(PPCE500PCIState), |
| .class_init = e500_pcihost_class_init, |
| }; |
| |
| static void e500_pci_register_types(void) |
| { |
| type_register_static(&e500_pcihost_info); |
| type_register_static(&e500_host_bridge_info); |
| } |
| |
| type_init(e500_pci_register_types) |