| /* |
| * QEMU model of the Xilinx Ethernet Lite MAC. |
| * |
| * Copyright (c) 2009 Edgar E. Iglesias. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "sysbus.h" |
| #include "hw.h" |
| #include "net.h" |
| |
| #define D(x) |
| #define R_TX_BUF0 0 |
| #define R_TX_LEN0 (0x07f4 / 4) |
| #define R_TX_GIE0 (0x07f8 / 4) |
| #define R_TX_CTRL0 (0x07fc / 4) |
| #define R_TX_BUF1 (0x0800 / 4) |
| #define R_TX_LEN1 (0x0ff4 / 4) |
| #define R_TX_CTRL1 (0x0ffc / 4) |
| |
| #define R_RX_BUF0 (0x1000 / 4) |
| #define R_RX_CTRL0 (0x17fc / 4) |
| #define R_RX_BUF1 (0x1800 / 4) |
| #define R_RX_CTRL1 (0x1ffc / 4) |
| #define R_MAX (0x2000 / 4) |
| |
| #define GIE_GIE 0x80000000 |
| |
| #define CTRL_I 0x8 |
| #define CTRL_P 0x2 |
| #define CTRL_S 0x1 |
| |
| struct xlx_ethlite |
| { |
| SysBusDevice busdev; |
| qemu_irq irq; |
| VLANClientState *vc; |
| |
| uint32_t c_tx_pingpong; |
| uint32_t c_rx_pingpong; |
| unsigned int txbuf; |
| unsigned int rxbuf; |
| |
| uint8_t macaddr[6]; |
| uint32_t regs[R_MAX]; |
| }; |
| |
| static inline void eth_pulse_irq(struct xlx_ethlite *s) |
| { |
| /* Only the first gie reg is active. */ |
| if (s->regs[R_TX_GIE0] & GIE_GIE) { |
| qemu_irq_pulse(s->irq); |
| } |
| } |
| |
| static uint32_t eth_readl (void *opaque, target_phys_addr_t addr) |
| { |
| struct xlx_ethlite *s = opaque; |
| uint32_t r = 0; |
| |
| addr >>= 2; |
| |
| switch (addr) |
| { |
| case R_TX_GIE0: |
| case R_TX_LEN0: |
| case R_TX_LEN1: |
| case R_TX_CTRL1: |
| case R_TX_CTRL0: |
| case R_RX_CTRL1: |
| case R_RX_CTRL0: |
| r = s->regs[addr]; |
| D(qemu_log("%s %x=%x\n", __func__, addr * 4, r)); |
| break; |
| |
| /* Rx packet data is endian fixed at the way into the rx rams. This |
| * speeds things up because the ethlite MAC does not have a len |
| * register. That means the CPU will issue MMIO reads for the entire |
| * 2k rx buffer even for small packets. |
| */ |
| default: |
| r = s->regs[addr]; |
| break; |
| } |
| return r; |
| } |
| |
| static void |
| eth_writel (void *opaque, target_phys_addr_t addr, uint32_t value) |
| { |
| struct xlx_ethlite *s = opaque; |
| unsigned int base = 0; |
| |
| addr >>= 2; |
| switch (addr) |
| { |
| case R_TX_CTRL0: |
| case R_TX_CTRL1: |
| if (addr == R_TX_CTRL1) |
| base = 0x800 / 4; |
| |
| D(qemu_log("%s addr=%x val=%x\n", __func__, addr * 4, value)); |
| if ((value & (CTRL_P | CTRL_S)) == CTRL_S) { |
| qemu_send_packet(s->vc, |
| (void *) &s->regs[base], |
| s->regs[base + R_TX_LEN0]); |
| D(qemu_log("eth_tx %d\n", s->regs[base + R_TX_LEN0])); |
| if (s->regs[base + R_TX_CTRL0] & CTRL_I) |
| eth_pulse_irq(s); |
| } else if ((value & (CTRL_P | CTRL_S)) == (CTRL_P | CTRL_S)) { |
| memcpy(&s->macaddr[0], &s->regs[base], 6); |
| if (s->regs[base + R_TX_CTRL0] & CTRL_I) |
| eth_pulse_irq(s); |
| } |
| |
| /* We are fast and get ready pretty much immediately so |
| we actually never flip the S nor P bits to one. */ |
| s->regs[addr] = value & ~(CTRL_P | CTRL_S); |
| break; |
| |
| /* Keep these native. */ |
| case R_TX_LEN0: |
| case R_TX_LEN1: |
| case R_TX_GIE0: |
| case R_RX_CTRL0: |
| case R_RX_CTRL1: |
| D(qemu_log("%s addr=%x val=%x\n", __func__, addr * 4, value)); |
| s->regs[addr] = value; |
| break; |
| |
| /* Packet data, make sure it stays BE. */ |
| default: |
| s->regs[addr] = cpu_to_be32(value); |
| break; |
| } |
| } |
| |
| static CPUReadMemoryFunc *eth_read[] = { |
| NULL, NULL, ð_readl, |
| }; |
| |
| static CPUWriteMemoryFunc *eth_write[] = { |
| NULL, NULL, ð_writel, |
| }; |
| |
| static int eth_can_rx(VLANClientState *vc) |
| { |
| struct xlx_ethlite *s = vc->opaque; |
| int r; |
| r = !(s->regs[R_RX_CTRL0] & CTRL_S); |
| return r; |
| } |
| |
| static ssize_t eth_rx(VLANClientState *vc, const uint8_t *buf, size_t size) |
| { |
| struct xlx_ethlite *s = vc->opaque; |
| unsigned int rxbase = s->rxbuf * (0x800 / 4); |
| int i; |
| |
| /* DA filter. */ |
| if (!(buf[0] & 0x80) && memcmp(&s->macaddr[0], buf, 6)) |
| return size; |
| |
| if (s->regs[rxbase + R_RX_CTRL0] & CTRL_S) { |
| D(qemu_log("ethlite lost packet %x\n", s->regs[R_RX_CTRL0])); |
| return -1; |
| } |
| |
| D(qemu_log("%s %d rxbase=%x\n", __func__, size, rxbase)); |
| memcpy(&s->regs[rxbase + R_RX_BUF0], buf, size); |
| |
| /* Bring it into host endianess. */ |
| for (i = 0; i < ((size + 3) / 4); i++) { |
| uint32_t d = s->regs[rxbase + R_RX_BUF0 + i]; |
| s->regs[rxbase + R_RX_BUF0 + i] = be32_to_cpu(d); |
| } |
| |
| s->regs[rxbase + R_RX_CTRL0] |= CTRL_S; |
| if (s->regs[rxbase + R_RX_CTRL0] & CTRL_I) |
| eth_pulse_irq(s); |
| |
| /* If c_rx_pingpong was set flip buffers. */ |
| s->rxbuf ^= s->c_rx_pingpong; |
| return size; |
| } |
| |
| static void eth_cleanup(VLANClientState *vc) |
| { |
| struct xlx_ethlite *s = vc->opaque; |
| qemu_free(s); |
| } |
| |
| static void xilinx_ethlite_init(SysBusDevice *dev) |
| { |
| struct xlx_ethlite *s = FROM_SYSBUS(typeof (*s), dev); |
| int regs; |
| |
| sysbus_init_irq(dev, &s->irq); |
| s->rxbuf = 0; |
| |
| regs = cpu_register_io_memory(eth_read, eth_write, s); |
| sysbus_init_mmio(dev, R_MAX * 4, regs); |
| |
| qdev_get_macaddr(&dev->qdev, s->macaddr); |
| s->vc = qdev_get_vlan_client(&dev->qdev, |
| eth_can_rx, eth_rx, NULL, eth_cleanup, s); |
| } |
| |
| static SysBusDeviceInfo xilinx_ethlite_info = { |
| .init = xilinx_ethlite_init, |
| .qdev.name = "xilinx,ethlite", |
| .qdev.size = sizeof(struct xlx_ethlite), |
| .qdev.props = (Property[]) { |
| { |
| .name = "txpingpong", |
| .info = &qdev_prop_uint32, |
| .offset = offsetof(struct xlx_ethlite, c_tx_pingpong), |
| .defval = (uint32_t[]) { 1 }, |
| },{ |
| .name = "rxpingpong", |
| .info = &qdev_prop_uint32, |
| .offset = offsetof(struct xlx_ethlite, c_rx_pingpong), |
| .defval = (uint32_t[]) { 1 }, |
| }, |
| {/* end of list */} |
| } |
| }; |
| |
| static void xilinx_ethlite_register(void) |
| { |
| sysbus_register_withprop(&xilinx_ethlite_info); |
| } |
| |
| device_init(xilinx_ethlite_register) |