| /* |
| * QEMU PowerPC 4xx embedded processors shared devices emulation |
| * |
| * Copyright (c) 2007 Jocelyn Mayer |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include "hw.h" |
| #include "ppc.h" |
| #include "ppc4xx.h" |
| #include "sysemu.h" |
| #include "qemu-log.h" |
| |
| //#define DEBUG_MMIO |
| //#define DEBUG_UNASSIGNED |
| #define DEBUG_UIC |
| |
| |
| #ifdef DEBUG_UIC |
| # define LOG_UIC(...) qemu_log_mask(CPU_LOG_INT, ## __VA_ARGS__) |
| #else |
| # define LOG_UIC(...) do { } while (0) |
| #endif |
| |
| /*****************************************************************************/ |
| /* Generic PowerPC 4xx processor instanciation */ |
| CPUState *ppc4xx_init (const char *cpu_model, |
| clk_setup_t *cpu_clk, clk_setup_t *tb_clk, |
| uint32_t sysclk) |
| { |
| CPUState *env; |
| |
| /* init CPUs */ |
| env = cpu_init(cpu_model); |
| if (!env) { |
| fprintf(stderr, "Unable to find PowerPC %s CPU definition\n", |
| cpu_model); |
| exit(1); |
| } |
| cpu_clk->cb = NULL; /* We don't care about CPU clock frequency changes */ |
| cpu_clk->opaque = env; |
| /* Set time-base frequency to sysclk */ |
| tb_clk->cb = ppc_emb_timers_init(env, sysclk); |
| tb_clk->opaque = env; |
| ppc_dcr_init(env, NULL, NULL); |
| /* Register qemu callbacks */ |
| qemu_register_reset(&cpu_ppc_reset, env); |
| |
| return env; |
| } |
| |
| /*****************************************************************************/ |
| /* Fake device used to map multiple devices in a single memory page */ |
| #define MMIO_AREA_BITS 8 |
| #define MMIO_AREA_LEN (1 << MMIO_AREA_BITS) |
| #define MMIO_AREA_NB (1 << (TARGET_PAGE_BITS - MMIO_AREA_BITS)) |
| #define MMIO_IDX(addr) (((addr) >> MMIO_AREA_BITS) & (MMIO_AREA_NB - 1)) |
| struct ppc4xx_mmio_t { |
| target_phys_addr_t base; |
| CPUReadMemoryFunc **mem_read[MMIO_AREA_NB]; |
| CPUWriteMemoryFunc **mem_write[MMIO_AREA_NB]; |
| void *opaque[MMIO_AREA_NB]; |
| }; |
| |
| static uint32_t unassigned_mmio_readb (void *opaque, target_phys_addr_t addr) |
| { |
| #ifdef DEBUG_UNASSIGNED |
| ppc4xx_mmio_t *mmio; |
| |
| mmio = opaque; |
| printf("Unassigned mmio read 0x" PADDRX " base " PADDRX "\n", |
| addr, mmio->base); |
| #endif |
| |
| return 0; |
| } |
| |
| static void unassigned_mmio_writeb (void *opaque, |
| target_phys_addr_t addr, uint32_t val) |
| { |
| #ifdef DEBUG_UNASSIGNED |
| ppc4xx_mmio_t *mmio; |
| |
| mmio = opaque; |
| printf("Unassigned mmio write 0x" PADDRX " = 0x%x base " PADDRX "\n", |
| addr, val, mmio->base); |
| #endif |
| } |
| |
| static CPUReadMemoryFunc *unassigned_mmio_read[3] = { |
| unassigned_mmio_readb, |
| unassigned_mmio_readb, |
| unassigned_mmio_readb, |
| }; |
| |
| static CPUWriteMemoryFunc *unassigned_mmio_write[3] = { |
| unassigned_mmio_writeb, |
| unassigned_mmio_writeb, |
| unassigned_mmio_writeb, |
| }; |
| |
| static uint32_t mmio_readlen (ppc4xx_mmio_t *mmio, |
| target_phys_addr_t addr, int len) |
| { |
| CPUReadMemoryFunc **mem_read; |
| uint32_t ret; |
| int idx; |
| |
| idx = MMIO_IDX(addr); |
| #if defined(DEBUG_MMIO) |
| printf("%s: mmio %p len %d addr " PADDRX " idx %d\n", __func__, |
| mmio, len, addr, idx); |
| #endif |
| mem_read = mmio->mem_read[idx]; |
| ret = (*mem_read[len])(mmio->opaque[idx], addr); |
| |
| return ret; |
| } |
| |
| static void mmio_writelen (ppc4xx_mmio_t *mmio, |
| target_phys_addr_t addr, uint32_t value, int len) |
| { |
| CPUWriteMemoryFunc **mem_write; |
| int idx; |
| |
| idx = MMIO_IDX(addr); |
| #if defined(DEBUG_MMIO) |
| printf("%s: mmio %p len %d addr " PADDRX " idx %d value %08" PRIx32 "\n", |
| __func__, mmio, len, addr, idx, value); |
| #endif |
| mem_write = mmio->mem_write[idx]; |
| (*mem_write[len])(mmio->opaque[idx], addr, value); |
| } |
| |
| static uint32_t mmio_readb (void *opaque, target_phys_addr_t addr) |
| { |
| #if defined(DEBUG_MMIO) |
| printf("%s: addr " PADDRX "\n", __func__, addr); |
| #endif |
| |
| return mmio_readlen(opaque, addr, 0); |
| } |
| |
| static void mmio_writeb (void *opaque, |
| target_phys_addr_t addr, uint32_t value) |
| { |
| #if defined(DEBUG_MMIO) |
| printf("%s: addr " PADDRX " val %08" PRIx32 "\n", __func__, addr, value); |
| #endif |
| mmio_writelen(opaque, addr, value, 0); |
| } |
| |
| static uint32_t mmio_readw (void *opaque, target_phys_addr_t addr) |
| { |
| #if defined(DEBUG_MMIO) |
| printf("%s: addr " PADDRX "\n", __func__, addr); |
| #endif |
| |
| return mmio_readlen(opaque, addr, 1); |
| } |
| |
| static void mmio_writew (void *opaque, |
| target_phys_addr_t addr, uint32_t value) |
| { |
| #if defined(DEBUG_MMIO) |
| printf("%s: addr " PADDRX " val %08" PRIx32 "\n", __func__, addr, value); |
| #endif |
| mmio_writelen(opaque, addr, value, 1); |
| } |
| |
| static uint32_t mmio_readl (void *opaque, target_phys_addr_t addr) |
| { |
| #if defined(DEBUG_MMIO) |
| printf("%s: addr " PADDRX "\n", __func__, addr); |
| #endif |
| |
| return mmio_readlen(opaque, addr, 2); |
| } |
| |
| static void mmio_writel (void *opaque, |
| target_phys_addr_t addr, uint32_t value) |
| { |
| #if defined(DEBUG_MMIO) |
| printf("%s: addr " PADDRX " val %08" PRIx32 "\n", __func__, addr, value); |
| #endif |
| mmio_writelen(opaque, addr, value, 2); |
| } |
| |
| static CPUReadMemoryFunc *mmio_read[] = { |
| &mmio_readb, |
| &mmio_readw, |
| &mmio_readl, |
| }; |
| |
| static CPUWriteMemoryFunc *mmio_write[] = { |
| &mmio_writeb, |
| &mmio_writew, |
| &mmio_writel, |
| }; |
| |
| int ppc4xx_mmio_register (CPUState *env, ppc4xx_mmio_t *mmio, |
| target_phys_addr_t offset, uint32_t len, |
| CPUReadMemoryFunc **mem_read, |
| CPUWriteMemoryFunc **mem_write, void *opaque) |
| { |
| target_phys_addr_t end; |
| int idx, eidx; |
| |
| if ((offset + len) > TARGET_PAGE_SIZE) |
| return -1; |
| idx = MMIO_IDX(offset); |
| end = offset + len - 1; |
| eidx = MMIO_IDX(end); |
| #if defined(DEBUG_MMIO) |
| printf("%s: offset " PADDRX " len %08" PRIx32 " " PADDRX " %d %d\n", |
| __func__, offset, len, end, idx, eidx); |
| #endif |
| for (; idx <= eidx; idx++) { |
| mmio->mem_read[idx] = mem_read; |
| mmio->mem_write[idx] = mem_write; |
| mmio->opaque[idx] = opaque; |
| } |
| |
| return 0; |
| } |
| |
| ppc4xx_mmio_t *ppc4xx_mmio_init (CPUState *env, target_phys_addr_t base) |
| { |
| ppc4xx_mmio_t *mmio; |
| int mmio_memory; |
| |
| mmio = qemu_mallocz(sizeof(ppc4xx_mmio_t)); |
| mmio->base = base; |
| mmio_memory = cpu_register_io_memory(mmio_read, mmio_write, mmio); |
| #if defined(DEBUG_MMIO) |
| printf("%s: base " PADDRX " len %08x %d\n", __func__, |
| base, TARGET_PAGE_SIZE, mmio_memory); |
| #endif |
| cpu_register_physical_memory(base, TARGET_PAGE_SIZE, mmio_memory); |
| ppc4xx_mmio_register(env, mmio, 0, TARGET_PAGE_SIZE, |
| unassigned_mmio_read, unassigned_mmio_write, |
| mmio); |
| |
| return mmio; |
| } |
| |
| /*****************************************************************************/ |
| /* "Universal" Interrupt controller */ |
| enum { |
| DCR_UICSR = 0x000, |
| DCR_UICSRS = 0x001, |
| DCR_UICER = 0x002, |
| DCR_UICCR = 0x003, |
| DCR_UICPR = 0x004, |
| DCR_UICTR = 0x005, |
| DCR_UICMSR = 0x006, |
| DCR_UICVR = 0x007, |
| DCR_UICVCR = 0x008, |
| DCR_UICMAX = 0x009, |
| }; |
| |
| #define UIC_MAX_IRQ 32 |
| typedef struct ppcuic_t ppcuic_t; |
| struct ppcuic_t { |
| uint32_t dcr_base; |
| int use_vectors; |
| uint32_t level; /* Remembers the state of level-triggered interrupts. */ |
| uint32_t uicsr; /* Status register */ |
| uint32_t uicer; /* Enable register */ |
| uint32_t uiccr; /* Critical register */ |
| uint32_t uicpr; /* Polarity register */ |
| uint32_t uictr; /* Triggering register */ |
| uint32_t uicvcr; /* Vector configuration register */ |
| uint32_t uicvr; |
| qemu_irq *irqs; |
| }; |
| |
| static void ppcuic_trigger_irq (ppcuic_t *uic) |
| { |
| uint32_t ir, cr; |
| int start, end, inc, i; |
| |
| /* Trigger interrupt if any is pending */ |
| ir = uic->uicsr & uic->uicer & (~uic->uiccr); |
| cr = uic->uicsr & uic->uicer & uic->uiccr; |
| LOG_UIC("%s: uicsr %08" PRIx32 " uicer %08" PRIx32 |
| " uiccr %08" PRIx32 "\n" |
| " %08" PRIx32 " ir %08" PRIx32 " cr %08" PRIx32 "\n", |
| __func__, uic->uicsr, uic->uicer, uic->uiccr, |
| uic->uicsr & uic->uicer, ir, cr); |
| if (ir != 0x0000000) { |
| LOG_UIC("Raise UIC interrupt\n"); |
| qemu_irq_raise(uic->irqs[PPCUIC_OUTPUT_INT]); |
| } else { |
| LOG_UIC("Lower UIC interrupt\n"); |
| qemu_irq_lower(uic->irqs[PPCUIC_OUTPUT_INT]); |
| } |
| /* Trigger critical interrupt if any is pending and update vector */ |
| if (cr != 0x0000000) { |
| qemu_irq_raise(uic->irqs[PPCUIC_OUTPUT_CINT]); |
| if (uic->use_vectors) { |
| /* Compute critical IRQ vector */ |
| if (uic->uicvcr & 1) { |
| start = 31; |
| end = 0; |
| inc = -1; |
| } else { |
| start = 0; |
| end = 31; |
| inc = 1; |
| } |
| uic->uicvr = uic->uicvcr & 0xFFFFFFFC; |
| for (i = start; i <= end; i += inc) { |
| if (cr & (1 << i)) { |
| uic->uicvr += (i - start) * 512 * inc; |
| break; |
| } |
| } |
| } |
| LOG_UIC("Raise UIC critical interrupt - " |
| "vector %08" PRIx32 "\n", uic->uicvr); |
| } else { |
| LOG_UIC("Lower UIC critical interrupt\n"); |
| qemu_irq_lower(uic->irqs[PPCUIC_OUTPUT_CINT]); |
| uic->uicvr = 0x00000000; |
| } |
| } |
| |
| static void ppcuic_set_irq (void *opaque, int irq_num, int level) |
| { |
| ppcuic_t *uic; |
| uint32_t mask, sr; |
| |
| uic = opaque; |
| mask = 1 << (31-irq_num); |
| LOG_UIC("%s: irq %d level %d uicsr %08" PRIx32 |
| " mask %08" PRIx32 " => %08" PRIx32 " %08" PRIx32 "\n", |
| __func__, irq_num, level, |
| uic->uicsr, mask, uic->uicsr & mask, level << irq_num); |
| if (irq_num < 0 || irq_num > 31) |
| return; |
| sr = uic->uicsr; |
| |
| /* Update status register */ |
| if (uic->uictr & mask) { |
| /* Edge sensitive interrupt */ |
| if (level == 1) |
| uic->uicsr |= mask; |
| } else { |
| /* Level sensitive interrupt */ |
| if (level == 1) { |
| uic->uicsr |= mask; |
| uic->level |= mask; |
| } else { |
| uic->uicsr &= ~mask; |
| uic->level &= ~mask; |
| } |
| } |
| LOG_UIC("%s: irq %d level %d sr %" PRIx32 " => " |
| "%08" PRIx32 "\n", __func__, irq_num, level, uic->uicsr, sr); |
| if (sr != uic->uicsr) |
| ppcuic_trigger_irq(uic); |
| } |
| |
| static target_ulong dcr_read_uic (void *opaque, int dcrn) |
| { |
| ppcuic_t *uic; |
| target_ulong ret; |
| |
| uic = opaque; |
| dcrn -= uic->dcr_base; |
| switch (dcrn) { |
| case DCR_UICSR: |
| case DCR_UICSRS: |
| ret = uic->uicsr; |
| break; |
| case DCR_UICER: |
| ret = uic->uicer; |
| break; |
| case DCR_UICCR: |
| ret = uic->uiccr; |
| break; |
| case DCR_UICPR: |
| ret = uic->uicpr; |
| break; |
| case DCR_UICTR: |
| ret = uic->uictr; |
| break; |
| case DCR_UICMSR: |
| ret = uic->uicsr & uic->uicer; |
| break; |
| case DCR_UICVR: |
| if (!uic->use_vectors) |
| goto no_read; |
| ret = uic->uicvr; |
| break; |
| case DCR_UICVCR: |
| if (!uic->use_vectors) |
| goto no_read; |
| ret = uic->uicvcr; |
| break; |
| default: |
| no_read: |
| ret = 0x00000000; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static void dcr_write_uic (void *opaque, int dcrn, target_ulong val) |
| { |
| ppcuic_t *uic; |
| |
| uic = opaque; |
| dcrn -= uic->dcr_base; |
| LOG_UIC("%s: dcr %d val " ADDRX "\n", __func__, dcrn, val); |
| switch (dcrn) { |
| case DCR_UICSR: |
| uic->uicsr &= ~val; |
| uic->uicsr |= uic->level; |
| ppcuic_trigger_irq(uic); |
| break; |
| case DCR_UICSRS: |
| uic->uicsr |= val; |
| ppcuic_trigger_irq(uic); |
| break; |
| case DCR_UICER: |
| uic->uicer = val; |
| ppcuic_trigger_irq(uic); |
| break; |
| case DCR_UICCR: |
| uic->uiccr = val; |
| ppcuic_trigger_irq(uic); |
| break; |
| case DCR_UICPR: |
| uic->uicpr = val; |
| break; |
| case DCR_UICTR: |
| uic->uictr = val; |
| ppcuic_trigger_irq(uic); |
| break; |
| case DCR_UICMSR: |
| break; |
| case DCR_UICVR: |
| break; |
| case DCR_UICVCR: |
| uic->uicvcr = val & 0xFFFFFFFD; |
| ppcuic_trigger_irq(uic); |
| break; |
| } |
| } |
| |
| static void ppcuic_reset (void *opaque) |
| { |
| ppcuic_t *uic; |
| |
| uic = opaque; |
| uic->uiccr = 0x00000000; |
| uic->uicer = 0x00000000; |
| uic->uicpr = 0x00000000; |
| uic->uicsr = 0x00000000; |
| uic->uictr = 0x00000000; |
| if (uic->use_vectors) { |
| uic->uicvcr = 0x00000000; |
| uic->uicvr = 0x0000000; |
| } |
| } |
| |
| qemu_irq *ppcuic_init (CPUState *env, qemu_irq *irqs, |
| uint32_t dcr_base, int has_ssr, int has_vr) |
| { |
| ppcuic_t *uic; |
| int i; |
| |
| uic = qemu_mallocz(sizeof(ppcuic_t)); |
| uic->dcr_base = dcr_base; |
| uic->irqs = irqs; |
| if (has_vr) |
| uic->use_vectors = 1; |
| for (i = 0; i < DCR_UICMAX; i++) { |
| ppc_dcr_register(env, dcr_base + i, uic, |
| &dcr_read_uic, &dcr_write_uic); |
| } |
| qemu_register_reset(ppcuic_reset, uic); |
| ppcuic_reset(uic); |
| |
| return qemu_allocate_irqs(&ppcuic_set_irq, uic, UIC_MAX_IRQ); |
| } |
| |
| /*****************************************************************************/ |
| /* SDRAM controller */ |
| typedef struct ppc4xx_sdram_t ppc4xx_sdram_t; |
| struct ppc4xx_sdram_t { |
| uint32_t addr; |
| int nbanks; |
| target_phys_addr_t ram_bases[4]; |
| target_phys_addr_t ram_sizes[4]; |
| uint32_t besr0; |
| uint32_t besr1; |
| uint32_t bear; |
| uint32_t cfg; |
| uint32_t status; |
| uint32_t rtr; |
| uint32_t pmit; |
| uint32_t bcr[4]; |
| uint32_t tr; |
| uint32_t ecccfg; |
| uint32_t eccesr; |
| qemu_irq irq; |
| }; |
| |
| enum { |
| SDRAM0_CFGADDR = 0x010, |
| SDRAM0_CFGDATA = 0x011, |
| }; |
| |
| /* XXX: TOFIX: some patches have made this code become inconsistent: |
| * there are type inconsistencies, mixing target_phys_addr_t, target_ulong |
| * and uint32_t |
| */ |
| static uint32_t sdram_bcr (target_phys_addr_t ram_base, |
| target_phys_addr_t ram_size) |
| { |
| uint32_t bcr; |
| |
| switch (ram_size) { |
| case (4 * 1024 * 1024): |
| bcr = 0x00000000; |
| break; |
| case (8 * 1024 * 1024): |
| bcr = 0x00020000; |
| break; |
| case (16 * 1024 * 1024): |
| bcr = 0x00040000; |
| break; |
| case (32 * 1024 * 1024): |
| bcr = 0x00060000; |
| break; |
| case (64 * 1024 * 1024): |
| bcr = 0x00080000; |
| break; |
| case (128 * 1024 * 1024): |
| bcr = 0x000A0000; |
| break; |
| case (256 * 1024 * 1024): |
| bcr = 0x000C0000; |
| break; |
| default: |
| printf("%s: invalid RAM size " PADDRX "\n", __func__, ram_size); |
| return 0x00000000; |
| } |
| bcr |= ram_base & 0xFF800000; |
| bcr |= 1; |
| |
| return bcr; |
| } |
| |
| static always_inline target_phys_addr_t sdram_base (uint32_t bcr) |
| { |
| return bcr & 0xFF800000; |
| } |
| |
| static target_ulong sdram_size (uint32_t bcr) |
| { |
| target_ulong size; |
| int sh; |
| |
| sh = (bcr >> 17) & 0x7; |
| if (sh == 7) |
| size = -1; |
| else |
| size = (4 * 1024 * 1024) << sh; |
| |
| return size; |
| } |
| |
| static void sdram_set_bcr (uint32_t *bcrp, uint32_t bcr, int enabled) |
| { |
| if (*bcrp & 0x00000001) { |
| /* Unmap RAM */ |
| #ifdef DEBUG_SDRAM |
| printf("%s: unmap RAM area " PADDRX " " ADDRX "\n", |
| __func__, sdram_base(*bcrp), sdram_size(*bcrp)); |
| #endif |
| cpu_register_physical_memory(sdram_base(*bcrp), sdram_size(*bcrp), |
| IO_MEM_UNASSIGNED); |
| } |
| *bcrp = bcr & 0xFFDEE001; |
| if (enabled && (bcr & 0x00000001)) { |
| #ifdef DEBUG_SDRAM |
| printf("%s: Map RAM area " PADDRX " " ADDRX "\n", |
| __func__, sdram_base(bcr), sdram_size(bcr)); |
| #endif |
| cpu_register_physical_memory(sdram_base(bcr), sdram_size(bcr), |
| sdram_base(bcr) | IO_MEM_RAM); |
| } |
| } |
| |
| static void sdram_map_bcr (ppc4xx_sdram_t *sdram) |
| { |
| int i; |
| |
| for (i = 0; i < sdram->nbanks; i++) { |
| if (sdram->ram_sizes[i] != 0) { |
| sdram_set_bcr(&sdram->bcr[i], |
| sdram_bcr(sdram->ram_bases[i], sdram->ram_sizes[i]), |
| 1); |
| } else { |
| sdram_set_bcr(&sdram->bcr[i], 0x00000000, 0); |
| } |
| } |
| } |
| |
| static void sdram_unmap_bcr (ppc4xx_sdram_t *sdram) |
| { |
| int i; |
| |
| for (i = 0; i < sdram->nbanks; i++) { |
| #ifdef DEBUG_SDRAM |
| printf("%s: Unmap RAM area " PADDRX " " ADDRX "\n", |
| __func__, sdram_base(sdram->bcr[i]), sdram_size(sdram->bcr[i])); |
| #endif |
| cpu_register_physical_memory(sdram_base(sdram->bcr[i]), |
| sdram_size(sdram->bcr[i]), |
| IO_MEM_UNASSIGNED); |
| } |
| } |
| |
| static target_ulong dcr_read_sdram (void *opaque, int dcrn) |
| { |
| ppc4xx_sdram_t *sdram; |
| target_ulong ret; |
| |
| sdram = opaque; |
| switch (dcrn) { |
| case SDRAM0_CFGADDR: |
| ret = sdram->addr; |
| break; |
| case SDRAM0_CFGDATA: |
| switch (sdram->addr) { |
| case 0x00: /* SDRAM_BESR0 */ |
| ret = sdram->besr0; |
| break; |
| case 0x08: /* SDRAM_BESR1 */ |
| ret = sdram->besr1; |
| break; |
| case 0x10: /* SDRAM_BEAR */ |
| ret = sdram->bear; |
| break; |
| case 0x20: /* SDRAM_CFG */ |
| ret = sdram->cfg; |
| break; |
| case 0x24: /* SDRAM_STATUS */ |
| ret = sdram->status; |
| break; |
| case 0x30: /* SDRAM_RTR */ |
| ret = sdram->rtr; |
| break; |
| case 0x34: /* SDRAM_PMIT */ |
| ret = sdram->pmit; |
| break; |
| case 0x40: /* SDRAM_B0CR */ |
| ret = sdram->bcr[0]; |
| break; |
| case 0x44: /* SDRAM_B1CR */ |
| ret = sdram->bcr[1]; |
| break; |
| case 0x48: /* SDRAM_B2CR */ |
| ret = sdram->bcr[2]; |
| break; |
| case 0x4C: /* SDRAM_B3CR */ |
| ret = sdram->bcr[3]; |
| break; |
| case 0x80: /* SDRAM_TR */ |
| ret = -1; /* ? */ |
| break; |
| case 0x94: /* SDRAM_ECCCFG */ |
| ret = sdram->ecccfg; |
| break; |
| case 0x98: /* SDRAM_ECCESR */ |
| ret = sdram->eccesr; |
| break; |
| default: /* Error */ |
| ret = -1; |
| break; |
| } |
| break; |
| default: |
| /* Avoid gcc warning */ |
| ret = 0x00000000; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static void dcr_write_sdram (void *opaque, int dcrn, target_ulong val) |
| { |
| ppc4xx_sdram_t *sdram; |
| |
| sdram = opaque; |
| switch (dcrn) { |
| case SDRAM0_CFGADDR: |
| sdram->addr = val; |
| break; |
| case SDRAM0_CFGDATA: |
| switch (sdram->addr) { |
| case 0x00: /* SDRAM_BESR0 */ |
| sdram->besr0 &= ~val; |
| break; |
| case 0x08: /* SDRAM_BESR1 */ |
| sdram->besr1 &= ~val; |
| break; |
| case 0x10: /* SDRAM_BEAR */ |
| sdram->bear = val; |
| break; |
| case 0x20: /* SDRAM_CFG */ |
| val &= 0xFFE00000; |
| if (!(sdram->cfg & 0x80000000) && (val & 0x80000000)) { |
| #ifdef DEBUG_SDRAM |
| printf("%s: enable SDRAM controller\n", __func__); |
| #endif |
| /* validate all RAM mappings */ |
| sdram_map_bcr(sdram); |
| sdram->status &= ~0x80000000; |
| } else if ((sdram->cfg & 0x80000000) && !(val & 0x80000000)) { |
| #ifdef DEBUG_SDRAM |
| printf("%s: disable SDRAM controller\n", __func__); |
| #endif |
| /* invalidate all RAM mappings */ |
| sdram_unmap_bcr(sdram); |
| sdram->status |= 0x80000000; |
| } |
| if (!(sdram->cfg & 0x40000000) && (val & 0x40000000)) |
| sdram->status |= 0x40000000; |
| else if ((sdram->cfg & 0x40000000) && !(val & 0x40000000)) |
| sdram->status &= ~0x40000000; |
| sdram->cfg = val; |
| break; |
| case 0x24: /* SDRAM_STATUS */ |
| /* Read-only register */ |
| break; |
| case 0x30: /* SDRAM_RTR */ |
| sdram->rtr = val & 0x3FF80000; |
| break; |
| case 0x34: /* SDRAM_PMIT */ |
| sdram->pmit = (val & 0xF8000000) | 0x07C00000; |
| break; |
| case 0x40: /* SDRAM_B0CR */ |
| sdram_set_bcr(&sdram->bcr[0], val, sdram->cfg & 0x80000000); |
| break; |
| case 0x44: /* SDRAM_B1CR */ |
| sdram_set_bcr(&sdram->bcr[1], val, sdram->cfg & 0x80000000); |
| break; |
| case 0x48: /* SDRAM_B2CR */ |
| sdram_set_bcr(&sdram->bcr[2], val, sdram->cfg & 0x80000000); |
| break; |
| case 0x4C: /* SDRAM_B3CR */ |
| sdram_set_bcr(&sdram->bcr[3], val, sdram->cfg & 0x80000000); |
| break; |
| case 0x80: /* SDRAM_TR */ |
| sdram->tr = val & 0x018FC01F; |
| break; |
| case 0x94: /* SDRAM_ECCCFG */ |
| sdram->ecccfg = val & 0x00F00000; |
| break; |
| case 0x98: /* SDRAM_ECCESR */ |
| val &= 0xFFF0F000; |
| if (sdram->eccesr == 0 && val != 0) |
| qemu_irq_raise(sdram->irq); |
| else if (sdram->eccesr != 0 && val == 0) |
| qemu_irq_lower(sdram->irq); |
| sdram->eccesr = val; |
| break; |
| default: /* Error */ |
| break; |
| } |
| break; |
| } |
| } |
| |
| static void sdram_reset (void *opaque) |
| { |
| ppc4xx_sdram_t *sdram; |
| |
| sdram = opaque; |
| sdram->addr = 0x00000000; |
| sdram->bear = 0x00000000; |
| sdram->besr0 = 0x00000000; /* No error */ |
| sdram->besr1 = 0x00000000; /* No error */ |
| sdram->cfg = 0x00000000; |
| sdram->ecccfg = 0x00000000; /* No ECC */ |
| sdram->eccesr = 0x00000000; /* No error */ |
| sdram->pmit = 0x07C00000; |
| sdram->rtr = 0x05F00000; |
| sdram->tr = 0x00854009; |
| /* We pre-initialize RAM banks */ |
| sdram->status = 0x00000000; |
| sdram->cfg = 0x00800000; |
| sdram_unmap_bcr(sdram); |
| } |
| |
| void ppc4xx_sdram_init (CPUState *env, qemu_irq irq, int nbanks, |
| target_phys_addr_t *ram_bases, |
| target_phys_addr_t *ram_sizes, |
| int do_init) |
| { |
| ppc4xx_sdram_t *sdram; |
| |
| sdram = qemu_mallocz(sizeof(ppc4xx_sdram_t)); |
| sdram->irq = irq; |
| sdram->nbanks = nbanks; |
| memset(sdram->ram_bases, 0, 4 * sizeof(target_phys_addr_t)); |
| memcpy(sdram->ram_bases, ram_bases, |
| nbanks * sizeof(target_phys_addr_t)); |
| memset(sdram->ram_sizes, 0, 4 * sizeof(target_phys_addr_t)); |
| memcpy(sdram->ram_sizes, ram_sizes, |
| nbanks * sizeof(target_phys_addr_t)); |
| sdram_reset(sdram); |
| qemu_register_reset(&sdram_reset, sdram); |
| ppc_dcr_register(env, SDRAM0_CFGADDR, |
| sdram, &dcr_read_sdram, &dcr_write_sdram); |
| ppc_dcr_register(env, SDRAM0_CFGDATA, |
| sdram, &dcr_read_sdram, &dcr_write_sdram); |
| if (do_init) |
| sdram_map_bcr(sdram); |
| } |
| |
| /* Fill in consecutive SDRAM banks with 'ram_size' bytes of memory. |
| * |
| * sdram_bank_sizes[] must be 0-terminated. |
| * |
| * The 4xx SDRAM controller supports a small number of banks, and each bank |
| * must be one of a small set of sizes. The number of banks and the supported |
| * sizes varies by SoC. */ |
| ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks, |
| target_phys_addr_t ram_bases[], |
| target_phys_addr_t ram_sizes[], |
| const unsigned int sdram_bank_sizes[]) |
| { |
| ram_addr_t size_left = ram_size; |
| int i; |
| int j; |
| |
| for (i = 0; i < nr_banks; i++) { |
| for (j = 0; sdram_bank_sizes[j] != 0; j++) { |
| unsigned int bank_size = sdram_bank_sizes[j]; |
| |
| if (bank_size <= size_left) { |
| ram_bases[i] = qemu_ram_alloc(bank_size); |
| ram_sizes[i] = bank_size; |
| size_left -= bank_size; |
| break; |
| } |
| } |
| |
| if (!size_left) { |
| /* No need to use the remaining banks. */ |
| break; |
| } |
| } |
| |
| ram_size -= size_left; |
| if (ram_size) |
| printf("Truncating memory to %d MiB to fit SDRAM controller limits.\n", |
| (int)(ram_size >> 20)); |
| |
| return ram_size; |
| } |