| /* |
| * Support for generating APEI tables and recording CPER for Guests |
| * |
| * Copyright (c) 2020 HUAWEI TECHNOLOGIES CO., LTD. |
| * |
| * Author: Dongjiu Geng <gengdongjiu@huawei.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/units.h" |
| #include "hw/acpi/ghes.h" |
| #include "hw/acpi/aml-build.h" |
| #include "qemu/error-report.h" |
| #include "hw/acpi/generic_event_device.h" |
| #include "hw/nvram/fw_cfg.h" |
| #include "qemu/uuid.h" |
| |
| #define ACPI_GHES_ERRORS_FW_CFG_FILE "etc/hardware_errors" |
| #define ACPI_GHES_DATA_ADDR_FW_CFG_FILE "etc/hardware_errors_addr" |
| |
| /* The max size in bytes for one error block */ |
| #define ACPI_GHES_MAX_RAW_DATA_LENGTH (1 * KiB) |
| |
| /* Now only support ARMv8 SEA notification type error source */ |
| #define ACPI_GHES_ERROR_SOURCE_COUNT 1 |
| |
| /* Generic Hardware Error Source version 2 */ |
| #define ACPI_GHES_SOURCE_GENERIC_ERROR_V2 10 |
| |
| /* Address offset in Generic Address Structure(GAS) */ |
| #define GAS_ADDR_OFFSET 4 |
| |
| /* |
| * The total size of Generic Error Data Entry |
| * ACPI 6.1/6.2: 18.3.2.7.1 Generic Error Data, |
| * Table 18-343 Generic Error Data Entry |
| */ |
| #define ACPI_GHES_DATA_LENGTH 72 |
| |
| /* The memory section CPER size, UEFI 2.6: N.2.5 Memory Error Section */ |
| #define ACPI_GHES_MEM_CPER_LENGTH 80 |
| |
| /* Masks for block_status flags */ |
| #define ACPI_GEBS_UNCORRECTABLE 1 |
| |
| /* |
| * Total size for Generic Error Status Block except Generic Error Data Entries |
| * ACPI 6.2: 18.3.2.7.1 Generic Error Data, |
| * Table 18-380 Generic Error Status Block |
| */ |
| #define ACPI_GHES_GESB_SIZE 20 |
| |
| /* |
| * Values for error_severity field |
| */ |
| enum AcpiGenericErrorSeverity { |
| ACPI_CPER_SEV_RECOVERABLE = 0, |
| ACPI_CPER_SEV_FATAL = 1, |
| ACPI_CPER_SEV_CORRECTED = 2, |
| ACPI_CPER_SEV_NONE = 3, |
| }; |
| |
| /* |
| * Hardware Error Notification |
| * ACPI 4.0: 17.3.2.7 Hardware Error Notification |
| * Composes dummy Hardware Error Notification descriptor of specified type |
| */ |
| static void build_ghes_hw_error_notification(GArray *table, const uint8_t type) |
| { |
| /* Type */ |
| build_append_int_noprefix(table, type, 1); |
| /* |
| * Length: |
| * Total length of the structure in bytes |
| */ |
| build_append_int_noprefix(table, 28, 1); |
| /* Configuration Write Enable */ |
| build_append_int_noprefix(table, 0, 2); |
| /* Poll Interval */ |
| build_append_int_noprefix(table, 0, 4); |
| /* Vector */ |
| build_append_int_noprefix(table, 0, 4); |
| /* Switch To Polling Threshold Value */ |
| build_append_int_noprefix(table, 0, 4); |
| /* Switch To Polling Threshold Window */ |
| build_append_int_noprefix(table, 0, 4); |
| /* Error Threshold Value */ |
| build_append_int_noprefix(table, 0, 4); |
| /* Error Threshold Window */ |
| build_append_int_noprefix(table, 0, 4); |
| } |
| |
| /* |
| * Generic Error Data Entry |
| * ACPI 6.1: 18.3.2.7.1 Generic Error Data |
| */ |
| static void acpi_ghes_generic_error_data(GArray *table, |
| const uint8_t *section_type, uint32_t error_severity, |
| uint8_t validation_bits, uint8_t flags, |
| uint32_t error_data_length, QemuUUID fru_id, |
| uint64_t time_stamp) |
| { |
| const uint8_t fru_text[20] = {0}; |
| |
| /* Section Type */ |
| g_array_append_vals(table, section_type, 16); |
| |
| /* Error Severity */ |
| build_append_int_noprefix(table, error_severity, 4); |
| /* Revision */ |
| build_append_int_noprefix(table, 0x300, 2); |
| /* Validation Bits */ |
| build_append_int_noprefix(table, validation_bits, 1); |
| /* Flags */ |
| build_append_int_noprefix(table, flags, 1); |
| /* Error Data Length */ |
| build_append_int_noprefix(table, error_data_length, 4); |
| |
| /* FRU Id */ |
| g_array_append_vals(table, fru_id.data, ARRAY_SIZE(fru_id.data)); |
| |
| /* FRU Text */ |
| g_array_append_vals(table, fru_text, sizeof(fru_text)); |
| |
| /* Timestamp */ |
| build_append_int_noprefix(table, time_stamp, 8); |
| } |
| |
| /* |
| * Generic Error Status Block |
| * ACPI 6.1: 18.3.2.7.1 Generic Error Data |
| */ |
| static void acpi_ghes_generic_error_status(GArray *table, uint32_t block_status, |
| uint32_t raw_data_offset, uint32_t raw_data_length, |
| uint32_t data_length, uint32_t error_severity) |
| { |
| /* Block Status */ |
| build_append_int_noprefix(table, block_status, 4); |
| /* Raw Data Offset */ |
| build_append_int_noprefix(table, raw_data_offset, 4); |
| /* Raw Data Length */ |
| build_append_int_noprefix(table, raw_data_length, 4); |
| /* Data Length */ |
| build_append_int_noprefix(table, data_length, 4); |
| /* Error Severity */ |
| build_append_int_noprefix(table, error_severity, 4); |
| } |
| |
| /* UEFI 2.6: N.2.5 Memory Error Section */ |
| static void acpi_ghes_build_append_mem_cper(GArray *table, |
| uint64_t error_physical_addr) |
| { |
| /* |
| * Memory Error Record |
| */ |
| |
| /* Validation Bits */ |
| build_append_int_noprefix(table, |
| (1ULL << 14) | /* Type Valid */ |
| (1ULL << 1) /* Physical Address Valid */, |
| 8); |
| /* Error Status */ |
| build_append_int_noprefix(table, 0, 8); |
| /* Physical Address */ |
| build_append_int_noprefix(table, error_physical_addr, 8); |
| /* Skip all the detailed information normally found in such a record */ |
| build_append_int_noprefix(table, 0, 48); |
| /* Memory Error Type */ |
| build_append_int_noprefix(table, 0 /* Unknown error */, 1); |
| /* Skip all the detailed information normally found in such a record */ |
| build_append_int_noprefix(table, 0, 7); |
| } |
| |
| static int acpi_ghes_record_mem_error(uint64_t error_block_address, |
| uint64_t error_physical_addr) |
| { |
| GArray *block; |
| |
| /* Memory Error Section Type */ |
| const uint8_t uefi_cper_mem_sec[] = |
| UUID_LE(0xA5BC1114, 0x6F64, 0x4EDE, 0xB8, 0x63, 0x3E, 0x83, \ |
| 0xED, 0x7C, 0x83, 0xB1); |
| |
| /* invalid fru id: ACPI 4.0: 17.3.2.6.1 Generic Error Data, |
| * Table 17-13 Generic Error Data Entry |
| */ |
| QemuUUID fru_id = {}; |
| uint32_t data_length; |
| |
| block = g_array_new(false, true /* clear */, 1); |
| |
| /* This is the length if adding a new generic error data entry*/ |
| data_length = ACPI_GHES_DATA_LENGTH + ACPI_GHES_MEM_CPER_LENGTH; |
| /* |
| * It should not run out of the preallocated memory if adding a new generic |
| * error data entry |
| */ |
| assert((data_length + ACPI_GHES_GESB_SIZE) <= |
| ACPI_GHES_MAX_RAW_DATA_LENGTH); |
| |
| /* Build the new generic error status block header */ |
| acpi_ghes_generic_error_status(block, ACPI_GEBS_UNCORRECTABLE, |
| 0, 0, data_length, ACPI_CPER_SEV_RECOVERABLE); |
| |
| /* Build this new generic error data entry header */ |
| acpi_ghes_generic_error_data(block, uefi_cper_mem_sec, |
| ACPI_CPER_SEV_RECOVERABLE, 0, 0, |
| ACPI_GHES_MEM_CPER_LENGTH, fru_id, 0); |
| |
| /* Build the memory section CPER for above new generic error data entry */ |
| acpi_ghes_build_append_mem_cper(block, error_physical_addr); |
| |
| /* Write the generic error data entry into guest memory */ |
| cpu_physical_memory_write(error_block_address, block->data, block->len); |
| |
| g_array_free(block, true); |
| |
| return 0; |
| } |
| |
| /* |
| * Build table for the hardware error fw_cfg blob. |
| * Initialize "etc/hardware_errors" and "etc/hardware_errors_addr" fw_cfg blobs. |
| * See docs/specs/acpi_hest_ghes.rst for blobs format. |
| */ |
| void build_ghes_error_table(GArray *hardware_errors, BIOSLinker *linker) |
| { |
| int i, error_status_block_offset; |
| |
| /* Build error_block_address */ |
| for (i = 0; i < ACPI_GHES_ERROR_SOURCE_COUNT; i++) { |
| build_append_int_noprefix(hardware_errors, 0, sizeof(uint64_t)); |
| } |
| |
| /* Build read_ack_register */ |
| for (i = 0; i < ACPI_GHES_ERROR_SOURCE_COUNT; i++) { |
| /* |
| * Initialize the value of read_ack_register to 1, so GHES can be |
| * writeable after (re)boot. |
| * ACPI 6.2: 18.3.2.8 Generic Hardware Error Source version 2 |
| * (GHESv2 - Type 10) |
| */ |
| build_append_int_noprefix(hardware_errors, 1, sizeof(uint64_t)); |
| } |
| |
| /* Generic Error Status Block offset in the hardware error fw_cfg blob */ |
| error_status_block_offset = hardware_errors->len; |
| |
| /* Reserve space for Error Status Data Block */ |
| acpi_data_push(hardware_errors, |
| ACPI_GHES_MAX_RAW_DATA_LENGTH * ACPI_GHES_ERROR_SOURCE_COUNT); |
| |
| /* Tell guest firmware to place hardware_errors blob into RAM */ |
| bios_linker_loader_alloc(linker, ACPI_GHES_ERRORS_FW_CFG_FILE, |
| hardware_errors, sizeof(uint64_t), false); |
| |
| for (i = 0; i < ACPI_GHES_ERROR_SOURCE_COUNT; i++) { |
| /* |
| * Tell firmware to patch error_block_address entries to point to |
| * corresponding "Generic Error Status Block" |
| */ |
| bios_linker_loader_add_pointer(linker, |
| ACPI_GHES_ERRORS_FW_CFG_FILE, sizeof(uint64_t) * i, |
| sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, |
| error_status_block_offset + i * ACPI_GHES_MAX_RAW_DATA_LENGTH); |
| } |
| |
| /* |
| * tell firmware to write hardware_errors GPA into |
| * hardware_errors_addr fw_cfg, once the former has been initialized. |
| */ |
| bios_linker_loader_write_pointer(linker, ACPI_GHES_DATA_ADDR_FW_CFG_FILE, |
| 0, sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, 0); |
| } |
| |
| /* Build Generic Hardware Error Source version 2 (GHESv2) */ |
| static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker) |
| { |
| uint64_t address_offset; |
| /* |
| * Type: |
| * Generic Hardware Error Source version 2(GHESv2 - Type 10) |
| */ |
| build_append_int_noprefix(table_data, ACPI_GHES_SOURCE_GENERIC_ERROR_V2, 2); |
| /* Source Id */ |
| build_append_int_noprefix(table_data, source_id, 2); |
| /* Related Source Id */ |
| build_append_int_noprefix(table_data, 0xffff, 2); |
| /* Flags */ |
| build_append_int_noprefix(table_data, 0, 1); |
| /* Enabled */ |
| build_append_int_noprefix(table_data, 1, 1); |
| |
| /* Number of Records To Pre-allocate */ |
| build_append_int_noprefix(table_data, 1, 4); |
| /* Max Sections Per Record */ |
| build_append_int_noprefix(table_data, 1, 4); |
| /* Max Raw Data Length */ |
| build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4); |
| |
| address_offset = table_data->len; |
| /* Error Status Address */ |
| build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0, |
| 4 /* QWord access */, 0); |
| bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE, |
| address_offset + GAS_ADDR_OFFSET, sizeof(uint64_t), |
| ACPI_GHES_ERRORS_FW_CFG_FILE, source_id * sizeof(uint64_t)); |
| |
| switch (source_id) { |
| case ACPI_HEST_SRC_ID_SEA: |
| /* |
| * Notification Structure |
| * Now only enable ARMv8 SEA notification type |
| */ |
| build_ghes_hw_error_notification(table_data, ACPI_GHES_NOTIFY_SEA); |
| break; |
| default: |
| error_report("Not support this error source"); |
| abort(); |
| } |
| |
| /* Error Status Block Length */ |
| build_append_int_noprefix(table_data, ACPI_GHES_MAX_RAW_DATA_LENGTH, 4); |
| |
| /* |
| * Read Ack Register |
| * ACPI 6.1: 18.3.2.8 Generic Hardware Error Source |
| * version 2 (GHESv2 - Type 10) |
| */ |
| address_offset = table_data->len; |
| build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0x40, 0, |
| 4 /* QWord access */, 0); |
| bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE, |
| address_offset + GAS_ADDR_OFFSET, |
| sizeof(uint64_t), ACPI_GHES_ERRORS_FW_CFG_FILE, |
| (ACPI_GHES_ERROR_SOURCE_COUNT + source_id) * sizeof(uint64_t)); |
| |
| /* |
| * Read Ack Preserve field |
| * We only provide the first bit in Read Ack Register to OSPM to write |
| * while the other bits are preserved. |
| */ |
| build_append_int_noprefix(table_data, ~0x1ULL, 8); |
| /* Read Ack Write */ |
| build_append_int_noprefix(table_data, 0x1, 8); |
| } |
| |
| /* Build Hardware Error Source Table */ |
| void acpi_build_hest(GArray *table_data, BIOSLinker *linker, |
| const char *oem_id, const char *oem_table_id) |
| { |
| AcpiTable table = { .sig = "HEST", .rev = 1, |
| .oem_id = oem_id, .oem_table_id = oem_table_id }; |
| |
| acpi_table_begin(&table, table_data); |
| |
| /* Error Source Count */ |
| build_append_int_noprefix(table_data, ACPI_GHES_ERROR_SOURCE_COUNT, 4); |
| build_ghes_v2(table_data, ACPI_HEST_SRC_ID_SEA, linker); |
| |
| acpi_table_end(linker, &table); |
| } |
| |
| void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s, |
| GArray *hardware_error) |
| { |
| /* Create a read-only fw_cfg file for GHES */ |
| fw_cfg_add_file(s, ACPI_GHES_ERRORS_FW_CFG_FILE, hardware_error->data, |
| hardware_error->len); |
| |
| /* Create a read-write fw_cfg file for Address */ |
| fw_cfg_add_file_callback(s, ACPI_GHES_DATA_ADDR_FW_CFG_FILE, NULL, NULL, |
| NULL, &(ags->ghes_addr_le), sizeof(ags->ghes_addr_le), false); |
| |
| ags->present = true; |
| } |
| |
| int acpi_ghes_record_errors(uint8_t source_id, uint64_t physical_address) |
| { |
| uint64_t error_block_addr, read_ack_register_addr, read_ack_register = 0; |
| uint64_t start_addr; |
| bool ret = -1; |
| AcpiGedState *acpi_ged_state; |
| AcpiGhesState *ags; |
| |
| assert(source_id < ACPI_HEST_SRC_ID_RESERVED); |
| |
| acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED, |
| NULL)); |
| g_assert(acpi_ged_state); |
| ags = &acpi_ged_state->ghes_state; |
| |
| start_addr = le64_to_cpu(ags->ghes_addr_le); |
| |
| if (physical_address) { |
| |
| if (source_id < ACPI_HEST_SRC_ID_RESERVED) { |
| start_addr += source_id * sizeof(uint64_t); |
| } |
| |
| cpu_physical_memory_read(start_addr, &error_block_addr, |
| sizeof(error_block_addr)); |
| |
| error_block_addr = le64_to_cpu(error_block_addr); |
| |
| read_ack_register_addr = start_addr + |
| ACPI_GHES_ERROR_SOURCE_COUNT * sizeof(uint64_t); |
| |
| cpu_physical_memory_read(read_ack_register_addr, |
| &read_ack_register, sizeof(read_ack_register)); |
| |
| /* zero means OSPM does not acknowledge the error */ |
| if (!read_ack_register) { |
| error_report("OSPM does not acknowledge previous error," |
| " so can not record CPER for current error anymore"); |
| } else if (error_block_addr) { |
| read_ack_register = cpu_to_le64(0); |
| /* |
| * Clear the Read Ack Register, OSPM will write it to 1 when |
| * it acknowledges this error. |
| */ |
| cpu_physical_memory_write(read_ack_register_addr, |
| &read_ack_register, sizeof(uint64_t)); |
| |
| ret = acpi_ghes_record_mem_error(error_block_addr, |
| physical_address); |
| } else |
| error_report("can not find Generic Error Status Block"); |
| } |
| |
| return ret; |
| } |
| |
| bool acpi_ghes_present(void) |
| { |
| AcpiGedState *acpi_ged_state; |
| AcpiGhesState *ags; |
| |
| acpi_ged_state = ACPI_GED(object_resolve_path_type("", TYPE_ACPI_GED, |
| NULL)); |
| |
| if (!acpi_ged_state) { |
| return false; |
| } |
| ags = &acpi_ged_state->ghes_state; |
| return ags->present; |
| } |