| #if !defined(__QEMU_MIPS_EXEC_H__) |
| #define __QEMU_MIPS_EXEC_H__ |
| |
| //#define DEBUG_OP |
| |
| #include "config.h" |
| #include "mips-defs.h" |
| #include "dyngen-exec.h" |
| #include "cpu-defs.h" |
| |
| register struct CPUMIPSState *env asm(AREG0); |
| |
| #include "cpu.h" |
| #include "exec-all.h" |
| |
| #if !defined(CONFIG_USER_ONLY) |
| #include "softmmu_exec.h" |
| #endif /* !defined(CONFIG_USER_ONLY) */ |
| |
| void dump_fpu(CPUState *env); |
| void fpu_dump_state(CPUState *env, FILE *f, |
| int (*fpu_fprintf)(FILE *f, const char *fmt, ...), |
| int flags); |
| |
| void cpu_mips_clock_init (CPUState *env); |
| void cpu_mips_tlb_flush (CPUState *env, int flush_global); |
| |
| static inline void env_to_regs(void) |
| { |
| } |
| |
| static inline void regs_to_env(void) |
| { |
| } |
| |
| static inline int cpu_halted(CPUState *env) |
| { |
| if (!env->halted) |
| return 0; |
| if (env->interrupt_request & |
| (CPU_INTERRUPT_HARD | CPU_INTERRUPT_TIMER)) { |
| env->halted = 0; |
| return 0; |
| } |
| return EXCP_HALTED; |
| } |
| |
| static inline void compute_hflags(CPUState *env) |
| { |
| env->hflags &= ~(MIPS_HFLAG_COP1X | MIPS_HFLAG_64 | MIPS_HFLAG_CP0 | |
| MIPS_HFLAG_F64 | MIPS_HFLAG_FPU | MIPS_HFLAG_KSU | |
| MIPS_HFLAG_UX); |
| if (!(env->CP0_Status & (1 << CP0St_EXL)) && |
| !(env->CP0_Status & (1 << CP0St_ERL)) && |
| !(env->hflags & MIPS_HFLAG_DM)) { |
| env->hflags |= (env->CP0_Status >> CP0St_KSU) & MIPS_HFLAG_KSU; |
| } |
| #if defined(TARGET_MIPS64) |
| if (((env->hflags & MIPS_HFLAG_KSU) != MIPS_HFLAG_UM) || |
| (env->CP0_Status & (1 << CP0St_PX)) || |
| (env->CP0_Status & (1 << CP0St_UX))) |
| env->hflags |= MIPS_HFLAG_64; |
| if (env->CP0_Status & (1 << CP0St_UX)) |
| env->hflags |= MIPS_HFLAG_UX; |
| #endif |
| if ((env->CP0_Status & (1 << CP0St_CU0)) || |
| !(env->hflags & MIPS_HFLAG_KSU)) |
| env->hflags |= MIPS_HFLAG_CP0; |
| if (env->CP0_Status & (1 << CP0St_CU1)) |
| env->hflags |= MIPS_HFLAG_FPU; |
| if (env->CP0_Status & (1 << CP0St_FR)) |
| env->hflags |= MIPS_HFLAG_F64; |
| if (env->insn_flags & ISA_MIPS32R2) { |
| if (env->active_fpu.fcr0 & (1 << FCR0_F64)) |
| env->hflags |= MIPS_HFLAG_COP1X; |
| } else if (env->insn_flags & ISA_MIPS32) { |
| if (env->hflags & MIPS_HFLAG_64) |
| env->hflags |= MIPS_HFLAG_COP1X; |
| } else if (env->insn_flags & ISA_MIPS4) { |
| /* All supported MIPS IV CPUs use the XX (CU3) to enable |
| and disable the MIPS IV extensions to the MIPS III ISA. |
| Some other MIPS IV CPUs ignore the bit, so the check here |
| would be too restrictive for them. */ |
| if (env->CP0_Status & (1 << CP0St_CU3)) |
| env->hflags |= MIPS_HFLAG_COP1X; |
| } |
| } |
| |
| #endif /* !defined(__QEMU_MIPS_EXEC_H__) */ |