| /* |
| * OMAP LCD controller. |
| * |
| * Copyright (C) 2006-2007 Andrzej Zaborowski <balrog@zabor.org> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| */ |
| #include "hw.h" |
| #include "console.h" |
| #include "omap.h" |
| #include "framebuffer.h" |
| |
| struct omap_lcd_panel_s { |
| qemu_irq irq; |
| DisplayState *state; |
| ram_addr_t imif_base; |
| ram_addr_t emiff_base; |
| |
| int plm; |
| int tft; |
| int mono; |
| int enable; |
| int width; |
| int height; |
| int interrupts; |
| uint32_t timing[3]; |
| uint32_t subpanel; |
| uint32_t ctrl; |
| |
| struct omap_dma_lcd_channel_s *dma; |
| uint16_t palette[256]; |
| int palette_done; |
| int frame_done; |
| int invalidate; |
| int sync_error; |
| }; |
| |
| static void omap_lcd_interrupts(struct omap_lcd_panel_s *s) |
| { |
| if (s->frame_done && (s->interrupts & 1)) { |
| qemu_irq_raise(s->irq); |
| return; |
| } |
| |
| if (s->palette_done && (s->interrupts & 2)) { |
| qemu_irq_raise(s->irq); |
| return; |
| } |
| |
| if (s->sync_error) { |
| qemu_irq_raise(s->irq); |
| return; |
| } |
| |
| qemu_irq_lower(s->irq); |
| } |
| |
| #include "pixel_ops.h" |
| |
| #define draw_line_func drawfn |
| |
| #define DEPTH 8 |
| #include "omap_lcd_template.h" |
| #define DEPTH 15 |
| #include "omap_lcd_template.h" |
| #define DEPTH 16 |
| #include "omap_lcd_template.h" |
| #define DEPTH 32 |
| #include "omap_lcd_template.h" |
| |
| static draw_line_func draw_line_table2[33] = { |
| [0 ... 32] = 0, |
| [8] = draw_line2_8, |
| [15] = draw_line2_15, |
| [16] = draw_line2_16, |
| [32] = draw_line2_32, |
| }, draw_line_table4[33] = { |
| [0 ... 32] = 0, |
| [8] = draw_line4_8, |
| [15] = draw_line4_15, |
| [16] = draw_line4_16, |
| [32] = draw_line4_32, |
| }, draw_line_table8[33] = { |
| [0 ... 32] = 0, |
| [8] = draw_line8_8, |
| [15] = draw_line8_15, |
| [16] = draw_line8_16, |
| [32] = draw_line8_32, |
| }, draw_line_table12[33] = { |
| [0 ... 32] = 0, |
| [8] = draw_line12_8, |
| [15] = draw_line12_15, |
| [16] = draw_line12_16, |
| [32] = draw_line12_32, |
| }, draw_line_table16[33] = { |
| [0 ... 32] = 0, |
| [8] = draw_line16_8, |
| [15] = draw_line16_15, |
| [16] = draw_line16_16, |
| [32] = draw_line16_32, |
| }; |
| |
| static void omap_update_display(void *opaque) |
| { |
| struct omap_lcd_panel_s *omap_lcd = (struct omap_lcd_panel_s *) opaque; |
| draw_line_func draw_line; |
| int size, height, first, last; |
| int width, linesize, step, bpp, frame_offset; |
| target_phys_addr_t frame_base; |
| |
| if (!omap_lcd || omap_lcd->plm == 1 || |
| !omap_lcd->enable || !ds_get_bits_per_pixel(omap_lcd->state)) |
| return; |
| |
| frame_offset = 0; |
| if (omap_lcd->plm != 2) { |
| cpu_physical_memory_read(omap_lcd->dma->phys_framebuffer[ |
| omap_lcd->dma->current_frame], |
| (void *)omap_lcd->palette, 0x200); |
| switch (omap_lcd->palette[0] >> 12 & 7) { |
| case 3 ... 7: |
| frame_offset += 0x200; |
| break; |
| default: |
| frame_offset += 0x20; |
| } |
| } |
| |
| /* Colour depth */ |
| switch ((omap_lcd->palette[0] >> 12) & 7) { |
| case 1: |
| draw_line = draw_line_table2[ds_get_bits_per_pixel(omap_lcd->state)]; |
| bpp = 2; |
| break; |
| |
| case 2: |
| draw_line = draw_line_table4[ds_get_bits_per_pixel(omap_lcd->state)]; |
| bpp = 4; |
| break; |
| |
| case 3: |
| draw_line = draw_line_table8[ds_get_bits_per_pixel(omap_lcd->state)]; |
| bpp = 8; |
| break; |
| |
| case 4 ... 7: |
| if (!omap_lcd->tft) |
| draw_line = draw_line_table12[ds_get_bits_per_pixel(omap_lcd->state)]; |
| else |
| draw_line = draw_line_table16[ds_get_bits_per_pixel(omap_lcd->state)]; |
| bpp = 16; |
| break; |
| |
| default: |
| /* Unsupported at the moment. */ |
| return; |
| } |
| |
| /* Resolution */ |
| width = omap_lcd->width; |
| if (width != ds_get_width(omap_lcd->state) || |
| omap_lcd->height != ds_get_height(omap_lcd->state)) { |
| qemu_console_resize(omap_lcd->state, |
| omap_lcd->width, omap_lcd->height); |
| omap_lcd->invalidate = 1; |
| } |
| |
| if (omap_lcd->dma->current_frame == 0) |
| size = omap_lcd->dma->src_f1_bottom - omap_lcd->dma->src_f1_top; |
| else |
| size = omap_lcd->dma->src_f2_bottom - omap_lcd->dma->src_f2_top; |
| |
| if (frame_offset + ((width * omap_lcd->height * bpp) >> 3) > size + 2) { |
| omap_lcd->sync_error = 1; |
| omap_lcd_interrupts(omap_lcd); |
| omap_lcd->enable = 0; |
| return; |
| } |
| |
| /* Content */ |
| frame_base = omap_lcd->dma->phys_framebuffer[ |
| omap_lcd->dma->current_frame] + frame_offset; |
| omap_lcd->dma->condition |= 1 << omap_lcd->dma->current_frame; |
| if (omap_lcd->dma->interrupts & 1) |
| qemu_irq_raise(omap_lcd->dma->irq); |
| if (omap_lcd->dma->dual) |
| omap_lcd->dma->current_frame ^= 1; |
| |
| if (!ds_get_bits_per_pixel(omap_lcd->state)) |
| return; |
| |
| first = 0; |
| height = omap_lcd->height; |
| if (omap_lcd->subpanel & (1 << 31)) { |
| if (omap_lcd->subpanel & (1 << 29)) |
| first = (omap_lcd->subpanel >> 16) & 0x3ff; |
| else |
| height = (omap_lcd->subpanel >> 16) & 0x3ff; |
| /* TODO: fill the rest of the panel with DPD */ |
| } |
| |
| step = width * bpp >> 3; |
| linesize = ds_get_linesize(omap_lcd->state); |
| framebuffer_update_display(omap_lcd->state, |
| frame_base, width, height, |
| step, linesize, 0, |
| omap_lcd->invalidate, |
| draw_line, omap_lcd->palette, |
| &first, &last); |
| if (first >= 0) { |
| dpy_update(omap_lcd->state, 0, first, width, last - first + 1); |
| } |
| omap_lcd->invalidate = 0; |
| } |
| |
| static int ppm_save(const char *filename, uint8_t *data, |
| int w, int h, int linesize) |
| { |
| FILE *f; |
| uint8_t *d, *d1; |
| unsigned int v; |
| int y, x, bpp; |
| |
| f = fopen(filename, "wb"); |
| if (!f) |
| return -1; |
| fprintf(f, "P6\n%d %d\n%d\n", w, h, 255); |
| d1 = data; |
| bpp = linesize / w; |
| for (y = 0; y < h; y ++) { |
| d = d1; |
| for (x = 0; x < w; x ++) { |
| v = *(uint32_t *) d; |
| switch (bpp) { |
| case 2: |
| fputc((v >> 8) & 0xf8, f); |
| fputc((v >> 3) & 0xfc, f); |
| fputc((v << 3) & 0xf8, f); |
| break; |
| case 3: |
| case 4: |
| default: |
| fputc((v >> 16) & 0xff, f); |
| fputc((v >> 8) & 0xff, f); |
| fputc((v) & 0xff, f); |
| break; |
| } |
| d += bpp; |
| } |
| d1 += linesize; |
| } |
| fclose(f); |
| return 0; |
| } |
| |
| static void omap_screen_dump(void *opaque, const char *filename) { |
| struct omap_lcd_panel_s *omap_lcd = opaque; |
| omap_update_display(opaque); |
| if (omap_lcd && ds_get_data(omap_lcd->state)) |
| ppm_save(filename, ds_get_data(omap_lcd->state), |
| omap_lcd->width, omap_lcd->height, |
| ds_get_linesize(omap_lcd->state)); |
| } |
| |
| static void omap_invalidate_display(void *opaque) { |
| struct omap_lcd_panel_s *omap_lcd = opaque; |
| omap_lcd->invalidate = 1; |
| } |
| |
| static void omap_lcd_update(struct omap_lcd_panel_s *s) { |
| if (!s->enable) { |
| s->dma->current_frame = -1; |
| s->sync_error = 0; |
| if (s->plm != 1) |
| s->frame_done = 1; |
| omap_lcd_interrupts(s); |
| return; |
| } |
| |
| if (s->dma->current_frame == -1) { |
| s->frame_done = 0; |
| s->palette_done = 0; |
| s->dma->current_frame = 0; |
| } |
| |
| if (!s->dma->mpu->port[s->dma->src].addr_valid(s->dma->mpu, |
| s->dma->src_f1_top) || |
| !s->dma->mpu->port[ |
| s->dma->src].addr_valid(s->dma->mpu, |
| s->dma->src_f1_bottom) || |
| (s->dma->dual && |
| (!s->dma->mpu->port[ |
| s->dma->src].addr_valid(s->dma->mpu, |
| s->dma->src_f2_top) || |
| !s->dma->mpu->port[ |
| s->dma->src].addr_valid(s->dma->mpu, |
| s->dma->src_f2_bottom)))) { |
| s->dma->condition |= 1 << 2; |
| if (s->dma->interrupts & (1 << 1)) |
| qemu_irq_raise(s->dma->irq); |
| s->enable = 0; |
| return; |
| } |
| |
| s->dma->phys_framebuffer[0] = s->dma->src_f1_top; |
| s->dma->phys_framebuffer[1] = s->dma->src_f2_top; |
| |
| if (s->plm != 2 && !s->palette_done) { |
| cpu_physical_memory_read( |
| s->dma->phys_framebuffer[s->dma->current_frame], |
| (void *)s->palette, 0x200); |
| s->palette_done = 1; |
| omap_lcd_interrupts(s); |
| } |
| } |
| |
| static uint32_t omap_lcdc_read(void *opaque, target_phys_addr_t addr) |
| { |
| struct omap_lcd_panel_s *s = (struct omap_lcd_panel_s *) opaque; |
| |
| switch (addr) { |
| case 0x00: /* LCD_CONTROL */ |
| return (s->tft << 23) | (s->plm << 20) | |
| (s->tft << 7) | (s->interrupts << 3) | |
| (s->mono << 1) | s->enable | s->ctrl | 0xfe000c34; |
| |
| case 0x04: /* LCD_TIMING0 */ |
| return (s->timing[0] << 10) | (s->width - 1) | 0x0000000f; |
| |
| case 0x08: /* LCD_TIMING1 */ |
| return (s->timing[1] << 10) | (s->height - 1); |
| |
| case 0x0c: /* LCD_TIMING2 */ |
| return s->timing[2] | 0xfc000000; |
| |
| case 0x10: /* LCD_STATUS */ |
| return (s->palette_done << 6) | (s->sync_error << 2) | s->frame_done; |
| |
| case 0x14: /* LCD_SUBPANEL */ |
| return s->subpanel; |
| |
| default: |
| break; |
| } |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_lcdc_write(void *opaque, target_phys_addr_t addr, |
| uint32_t value) |
| { |
| struct omap_lcd_panel_s *s = (struct omap_lcd_panel_s *) opaque; |
| |
| switch (addr) { |
| case 0x00: /* LCD_CONTROL */ |
| s->plm = (value >> 20) & 3; |
| s->tft = (value >> 7) & 1; |
| s->interrupts = (value >> 3) & 3; |
| s->mono = (value >> 1) & 1; |
| s->ctrl = value & 0x01cff300; |
| if (s->enable != (value & 1)) { |
| s->enable = value & 1; |
| omap_lcd_update(s); |
| } |
| break; |
| |
| case 0x04: /* LCD_TIMING0 */ |
| s->timing[0] = value >> 10; |
| s->width = (value & 0x3ff) + 1; |
| break; |
| |
| case 0x08: /* LCD_TIMING1 */ |
| s->timing[1] = value >> 10; |
| s->height = (value & 0x3ff) + 1; |
| break; |
| |
| case 0x0c: /* LCD_TIMING2 */ |
| s->timing[2] = value; |
| break; |
| |
| case 0x10: /* LCD_STATUS */ |
| break; |
| |
| case 0x14: /* LCD_SUBPANEL */ |
| s->subpanel = value & 0xa1ffffff; |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| } |
| } |
| |
| static CPUReadMemoryFunc *omap_lcdc_readfn[] = { |
| omap_lcdc_read, |
| omap_lcdc_read, |
| omap_lcdc_read, |
| }; |
| |
| static CPUWriteMemoryFunc *omap_lcdc_writefn[] = { |
| omap_lcdc_write, |
| omap_lcdc_write, |
| omap_lcdc_write, |
| }; |
| |
| void omap_lcdc_reset(struct omap_lcd_panel_s *s) |
| { |
| s->dma->current_frame = -1; |
| s->plm = 0; |
| s->tft = 0; |
| s->mono = 0; |
| s->enable = 0; |
| s->width = 0; |
| s->height = 0; |
| s->interrupts = 0; |
| s->timing[0] = 0; |
| s->timing[1] = 0; |
| s->timing[2] = 0; |
| s->subpanel = 0; |
| s->palette_done = 0; |
| s->frame_done = 0; |
| s->sync_error = 0; |
| s->invalidate = 1; |
| s->subpanel = 0; |
| s->ctrl = 0; |
| } |
| |
| struct omap_lcd_panel_s *omap_lcdc_init(target_phys_addr_t base, qemu_irq irq, |
| struct omap_dma_lcd_channel_s *dma, |
| ram_addr_t imif_base, ram_addr_t emiff_base, omap_clk clk) |
| { |
| int iomemtype; |
| struct omap_lcd_panel_s *s = (struct omap_lcd_panel_s *) |
| qemu_mallocz(sizeof(struct omap_lcd_panel_s)); |
| |
| s->irq = irq; |
| s->dma = dma; |
| s->imif_base = imif_base; |
| s->emiff_base = emiff_base; |
| omap_lcdc_reset(s); |
| |
| iomemtype = cpu_register_io_memory(0, omap_lcdc_readfn, |
| omap_lcdc_writefn, s); |
| cpu_register_physical_memory(base, 0x100, iomemtype); |
| |
| s->state = graphic_console_init(omap_update_display, |
| omap_invalidate_display, |
| omap_screen_dump, NULL, s); |
| |
| return s; |
| } |