| # See docs/devel/tracing.txt for syntax documentation. |
| |
| # hw/tpm/tpm_crb.c |
| tpm_crb_mmio_read(uint64_t addr, unsigned size, uint32_t val) "CRB read 0x" TARGET_FMT_plx " len:%u val: 0x%" PRIx32 |
| tpm_crb_mmio_write(uint64_t addr, unsigned size, uint32_t val) "CRB write 0x" TARGET_FMT_plx " len:%u val: 0x%" PRIx32 |
| |
| # hw/tpm/tpm_passthrough.c |
| tpm_passthrough_handle_request(void *cmd) "processing command %p" |
| tpm_passthrough_reset(void) "reset" |
| |
| # hw/tpm/tpm_util.c |
| tpm_util_get_buffer_size_hdr_len(uint32_t len, size_t expected) "tpm_resp->hdr.len = %u, expected = %zu" |
| tpm_util_get_buffer_size_len(uint32_t len, size_t expected) "tpm_resp->len = %u, expected = %zu" |
| tpm_util_get_buffer_size_hdr_len2(uint32_t len, size_t expected) "tpm2_resp->hdr.len = %u, expected = %zu" |
| tpm_util_get_buffer_size_len2(uint32_t len, size_t expected) "tpm2_resp->len = %u, expected = %zu" |
| tpm_util_get_buffer_size(size_t len) "buffersize of device: %zu" |
| |
| # hw/tpm/tpm_emulator.c |
| tpm_emulator_set_locality(uint8_t locty) "setting locality to %d" |
| tpm_emulator_handle_request(void) "processing TPM command" |
| tpm_emulator_probe_caps(uint64_t caps) "capabilities: 0x%"PRIx64 |
| tpm_emulator_set_buffer_size(uint32_t buffersize, uint32_t minsize, uint32_t maxsize) "buffer size: %u, min: %u, max: %u" |
| tpm_emulator_startup_tpm_resume(bool is_resume, size_t buffersize) "is_resume: %d, buffer size: %zu" |
| tpm_emulator_get_tpm_established_flag(uint8_t flag) "got established flag: %d" |
| tpm_emulator_cancel_cmd_not_supt(void) "Backend does not support CANCEL_TPM_CMD" |
| tpm_emulator_handle_device_opts_tpm12(void) "TPM Version 1.2" |
| tpm_emulator_handle_device_opts_tpm2(void) "TPM Version 2" |
| tpm_emulator_handle_device_opts_unspec(void) "TPM Version Unspecified" |
| tpm_emulator_handle_device_opts_startup_error(void) "Startup error" |
| tpm_emulator_get_state_blob(uint8_t type, uint32_t size, uint32_t flags) "got state blob type %d, %u bytes, flags 0x%08x" |
| tpm_emulator_set_state_blob(uint8_t type, uint32_t size, uint32_t flags) "set state blob type %d, %u bytes, flags 0x%08x" |
| tpm_emulator_set_state_blobs(void) "setting state blobs" |
| tpm_emulator_set_state_blobs_error(const char *msg) "error while setting state blobs: %s" |
| tpm_emulator_set_state_blobs_done(void) "Done setting state blobs" |
| tpm_emulator_pre_save(void) "" |
| tpm_emulator_inst_init(void) "" |
| |
| # hw/tpm/tpm_tis.c |
| tpm_tis_raise_irq(uint32_t irqmask) "Raising IRQ for flag 0x%08x" |
| tpm_tis_new_active_locality(uint8_t locty) "Active locality is now %d" |
| tpm_tis_abort(uint8_t locty) "New active locality is %d" |
| tpm_tis_data_read(uint32_t value, uint32_t off) "byte 0x%02x [%d]" |
| tpm_tis_mmio_read(unsigned size, uint32_t addr, uint32_t val) " read.%u(0x%08x) = 0x%08x" |
| tpm_tis_mmio_write(unsigned size, uint32_t addr, uint32_t val) "write.%u(0x%08x) = 0x%08x" |
| tpm_tis_mmio_write_locty4(void) "Access to locality 4 only allowed from hardware" |
| tpm_tis_mmio_write_release_locty(uint8_t locty) "Releasing locality %d" |
| tpm_tis_mmio_write_locty_req_use(uint8_t locty) "Locality %d requests use" |
| tpm_tis_mmio_write_next_locty(uint8_t locty) "Next active locality is %d" |
| tpm_tis_mmio_write_locty_seized(uint8_t locty, uint8_t active) "Locality %d seized from locality %d" |
| tpm_tis_mmio_write_init_abort(void) "Initiating abort" |
| tpm_tis_mmio_write_lowering_irq(void) "Lowering IRQ" |
| tpm_tis_mmio_write_data2send(uint32_t value, unsigned size) "Data to send to TPM: 0x%08x (size=%d)" |
| tpm_tis_pre_save(uint8_t locty, uint32_t rw_offset) "locty: %d, rw_offset = %u" |
| |
| # hw/tpm/tpm_ppi.c |
| tpm_ppi_memset(uint8_t *ptr, size_t size) "memset: %p %zu" |
