hw/s390-virtio.c - qemu - Git at Google

 /*
  * QEMU S390 virtio target
  *
  * Copyright (c) 2009 Alexander Graf <agraf@suse.de>
  *
  * This library is free software; you can redistribute it and/or
  * modify it under the terms of the GNU Lesser General Public
  * License as published by the Free Software Foundation; either
  * version 2 of the License, or (at your option) any later version.
  *
  * This library is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * Lesser General Public License for more details.
  *
  * You should have received a copy of the GNU Lesser General Public
  * License along with this library; if not, see <http://www.gnu.org/licenses/>.
  */

 #include "hw.h"
 #include "block.h"
 #include "blockdev.h"
 #include "sysemu.h"
 #include "net.h"
 #include "boards.h"
 #include "monitor.h"
 #include "loader.h"
 #include "elf.h"
 #include "hw/virtio.h"
 #include "hw/sysbus.h"
 #include "kvm.h"
 #include "exec-memory.h"

 #include "hw/s390-virtio-bus.h"

 //#define DEBUG_S390

 #ifdef DEBUG_S390
 #define dprintf(fmt, ...) \
     do { fprintf(stderr, fmt, ## __VA_ARGS__); } while (0)
 #else
 #define dprintf(fmt, ...) \
     do { } while (0)
 #endif

 #define KVM_S390_VIRTIO_NOTIFY          0
 #define KVM_S390_VIRTIO_RESET           1
 #define KVM_S390_VIRTIO_SET_STATUS      2

 #define KERN_IMAGE_START                0x010000UL
 #define KERN_PARM_AREA                  0x010480UL
 #define INITRD_START                    0x800000UL
 #define INITRD_PARM_START               0x010408UL
 #define INITRD_PARM_SIZE                0x010410UL
 #define PARMFILE_START                  0x001000UL

 #define ZIPL_START			0x009000UL
 #define ZIPL_LOAD_ADDR			0x009000UL
 #define ZIPL_FILENAME			"s390-zipl.rom"

 #define MAX_BLK_DEVS                    10

 static VirtIOS390Bus *s390_bus;
 static CPUS390XState **ipi_states;

 CPUS390XState *s390_cpu_addr2state(uint16_t cpu_addr)
 {
     if (cpu_addr >= smp_cpus) {
         return NULL;
     }

     return ipi_states[cpu_addr];
 }

 int s390_virtio_hypercall(CPUS390XState *env, uint64_t mem, uint64_t hypercall)
 {
     int r = 0, i;

     dprintf("KVM hypercall: %ld\n", hypercall);
     switch (hypercall) {
     case KVM_S390_VIRTIO_NOTIFY:
         if (mem > ram_size) {
             VirtIOS390Device *dev = s390_virtio_bus_find_vring(s390_bus,
                                                                mem, &i);
             if (dev) {
                 virtio_queue_notify(dev->vdev, i);
             } else {
                 r = -EINVAL;
             }
         } else {
             /* Early printk */
         }
         break;
     case KVM_S390_VIRTIO_RESET:
     {
         VirtIOS390Device *dev;

         dev = s390_virtio_bus_find_mem(s390_bus, mem);
         virtio_reset(dev->vdev);
         stb_phys(dev->dev_offs + VIRTIO_DEV_OFFS_STATUS, 0);
         s390_virtio_device_sync(dev);
         s390_virtio_reset_idx(dev);
         break;
     }
     case KVM_S390_VIRTIO_SET_STATUS:
     {
         VirtIOS390Device *dev;

         dev = s390_virtio_bus_find_mem(s390_bus, mem);
         if (dev) {
             s390_virtio_device_update_status(dev);
         } else {
             r = -EINVAL;
         }
         break;
     }
     default:
         r = -EINVAL;
         break;
     }

     return r;
 }

 /*
  * The number of running CPUs. On s390 a shutdown is the state of all CPUs
  * being either stopped or disabled (for interrupts) waiting. We have to
  * track this number to call the shutdown sequence accordingly. This
  * number is modified either on startup or while holding the big qemu lock.
  */
 static unsigned s390_running_cpus;

 void s390_add_running_cpu(CPUS390XState *env)
 {
     if (env->halted) {
         s390_running_cpus++;
         env->halted = 0;
         env->exception_index = -1;
     }
 }

 unsigned s390_del_running_cpu(CPUS390XState *env)
 {
     if (env->halted == 0) {
         assert(s390_running_cpus >= 1);
         s390_running_cpus--;
         env->halted = 1;
         env->exception_index = EXCP_HLT;
     }
     return s390_running_cpus;
 }

 /* PC hardware initialisation */
 static void s390_init(ram_addr_t my_ram_size,
                       const char *boot_device,
                       const char *kernel_filename,
                       const char *kernel_cmdline,
                       const char *initrd_filename,
                       const char *cpu_model)
 {
     CPUS390XState *env = NULL;
     MemoryRegion *sysmem = get_system_memory();
     MemoryRegion *ram = g_new(MemoryRegion, 1);
     ram_addr_t kernel_size = 0;
     ram_addr_t initrd_offset;
     ram_addr_t initrd_size = 0;
     int shift = 0;
     uint8_t *storage_keys;
     void *virtio_region;
     target_phys_addr_t virtio_region_len;
     target_phys_addr_t virtio_region_start;
     int i;

     /* s390x ram size detection needs a 16bit multiplier + an increment. So
        guests > 64GB can be specified in 2MB steps etc. */
     while ((my_ram_size >> (20 + shift)) > 65535) {
         shift++;
     }
     my_ram_size = my_ram_size >> (20 + shift) << (20 + shift);

     /* lets propagate the changed ram size into the global variable. */
     ram_size = my_ram_size;

     /* get a BUS */
     s390_bus = s390_virtio_bus_init(&my_ram_size);

     /* allocate RAM */
     memory_region_init_ram(ram, "s390.ram", my_ram_size);
     vmstate_register_ram_global(ram);
     memory_region_add_subregion(sysmem, 0, ram);

     /* clear virtio region */
     virtio_region_len = my_ram_size - ram_size;
     virtio_region_start = ram_size;
     virtio_region = cpu_physical_memory_map(virtio_region_start,
                                             &virtio_region_len, true);
     memset(virtio_region, 0, virtio_region_len);
     cpu_physical_memory_unmap(virtio_region, virtio_region_len, 1,
                               virtio_region_len);

     /* allocate storage keys */
     storage_keys = g_malloc0(my_ram_size / TARGET_PAGE_SIZE);

     /* init CPUs */
     if (cpu_model == NULL) {
         cpu_model = "host";
     }

     ipi_states = g_malloc(sizeof(CPUS390XState *) * smp_cpus);

     for (i = 0; i < smp_cpus; i++) {
         CPUS390XState *tmp_env;

         tmp_env = cpu_init(cpu_model);
         if (!env) {
             env = tmp_env;
         }
         ipi_states[i] = tmp_env;
         tmp_env->halted = 1;
         tmp_env->exception_index = EXCP_HLT;
         tmp_env->storage_keys = storage_keys;
     }

     /* One CPU has to run */
     s390_add_running_cpu(env);

     if (kernel_filename) {

         kernel_size = load_elf(kernel_filename, NULL, NULL, NULL, NULL,
                                NULL, 1, ELF_MACHINE, 0);
         if (kernel_size == -1UL) {
             kernel_size = load_image_targphys(kernel_filename, 0, ram_size);
         }
         if (kernel_size == -1UL) {
             fprintf(stderr, "qemu: could not load kernel '%s'\n",
                     kernel_filename);
             exit(1);
         }
         /*
          * we can not rely on the ELF entry point, since up to 3.2 this
          * value was 0x800 (the SALIPL loader) and it wont work. For
          * all (Linux) cases 0x10000 (KERN_IMAGE_START) should be fine.
          */
         env->psw.addr = KERN_IMAGE_START;
         env->psw.mask = 0x0000000180000000ULL;
     } else {
         ram_addr_t bios_size = 0;
         char *bios_filename;

         /* Load zipl bootloader */
         if (bios_name == NULL) {
             bios_name = ZIPL_FILENAME;
         }

         bios_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
         bios_size = load_image_targphys(bios_filename, ZIPL_LOAD_ADDR, 4096);
         g_free(bios_filename);

         if ((long)bios_size < 0) {
             hw_error("could not load bootloader '%s'\n", bios_name);
         }

         if (bios_size > 4096) {
             hw_error("stage1 bootloader is > 4k\n");
         }

         env->psw.addr = ZIPL_START;
         env->psw.mask = 0x0000000180000000ULL;
     }

     if (initrd_filename) {
         initrd_offset = INITRD_START;
         while (kernel_size + 0x100000 > initrd_offset) {
             initrd_offset += 0x100000;
         }
         initrd_size = load_image_targphys(initrd_filename, initrd_offset,
                                           ram_size - initrd_offset);
         if (initrd_size == -1UL) {
             fprintf(stderr, "qemu: could not load initrd '%s'\n",
                     initrd_filename);
             exit(1);
         }

         /* we have to overwrite values in the kernel image, which are "rom" */
         memcpy(rom_ptr(INITRD_PARM_START), &initrd_offset, 8);
         memcpy(rom_ptr(INITRD_PARM_SIZE), &initrd_size, 8);
     }

     if (rom_ptr(KERN_PARM_AREA)) {
         /* we have to overwrite values in the kernel image, which are "rom" */
         memcpy(rom_ptr(KERN_PARM_AREA), kernel_cmdline,
                strlen(kernel_cmdline) + 1);
     }

     /* Create VirtIO network adapters */
     for(i = 0; i < nb_nics; i++) {
         NICInfo *nd = &nd_table[i];
         DeviceState *dev;

         if (!nd->model) {
             nd->model = g_strdup("virtio");
         }

         if (strcmp(nd->model, "virtio")) {
             fprintf(stderr, "S390 only supports VirtIO nics\n");
             exit(1);
         }

         dev = qdev_create((BusState *)s390_bus, "virtio-net-s390");
         qdev_set_nic_properties(dev, nd);
         qdev_init_nofail(dev);
     }

     /* Create VirtIO disk drives */
     for(i = 0; i < MAX_BLK_DEVS; i++) {
         DriveInfo *dinfo;
         DeviceState *dev;

         dinfo = drive_get(IF_IDE, 0, i);
         if (!dinfo) {
             continue;
         }

         dev = qdev_create((BusState *)s390_bus, "virtio-blk-s390");
         qdev_prop_set_drive_nofail(dev, "drive", dinfo->bdrv);
         qdev_init_nofail(dev);
     }
 }

 static QEMUMachine s390_machine = {
     .name = "s390-virtio",
     .alias = "s390",
     .desc = "VirtIO based S390 machine",
     .init = s390_init,
     .no_cdrom = 1,
     .no_floppy = 1,
     .no_serial = 1,
     .no_parallel = 1,
     .no_sdcard = 1,
     .use_virtcon = 1,
     .max_cpus = 255,
     .is_default = 1,
 };

 static void s390_machine_init(void)
 {
     qemu_register_machine(&s390_machine);
 }

 machine_init(s390_machine_init);
	/*
	* QEMU S390 virtio target
	*
	* Copyright (c) 2009 Alexander Graf <agraf@suse.de>
	*
	* This library is free software; you can redistribute it and/or
	* modify it under the terms of the GNU Lesser General Public
	* License as published by the Free Software Foundation; either
	* version 2 of the License, or (at your option) any later version.
	*
	* This library is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	* Lesser General Public License for more details.
	*
	* You should have received a copy of the GNU Lesser General Public
	* License along with this library; if not, see <http://www.gnu.org/licenses/>.
	*/

	#include "hw.h"
	#include "block.h"
	#include "blockdev.h"
	#include "sysemu.h"
	#include "net.h"
	#include "boards.h"
	#include "monitor.h"
	#include "loader.h"
	#include "elf.h"
	#include "hw/virtio.h"
	#include "hw/sysbus.h"
	#include "kvm.h"
	#include "exec-memory.h"

	#include "hw/s390-virtio-bus.h"

	//#define DEBUG_S390

	#ifdef DEBUG_S390
	#define dprintf(fmt, ...) \
	do { fprintf(stderr, fmt, ## __VA_ARGS__); } while (0)
	#else
	#define dprintf(fmt, ...) \
	do { } while (0)
	#endif

	#define KVM_S390_VIRTIO_NOTIFY 0
	#define KVM_S390_VIRTIO_RESET 1
	#define KVM_S390_VIRTIO_SET_STATUS 2

	#define KERN_IMAGE_START 0x010000UL
	#define KERN_PARM_AREA 0x010480UL
	#define INITRD_START 0x800000UL
	#define INITRD_PARM_START 0x010408UL
	#define INITRD_PARM_SIZE 0x010410UL
	#define PARMFILE_START 0x001000UL

	#define ZIPL_START 0x009000UL
	#define ZIPL_LOAD_ADDR 0x009000UL
	#define ZIPL_FILENAME "s390-zipl.rom"

	#define MAX_BLK_DEVS 10

	static VirtIOS390Bus *s390_bus;
	static CPUS390XState **ipi_states;

	CPUS390XState *s390_cpu_addr2state(uint16_t cpu_addr)
	{
	if (cpu_addr >= smp_cpus) {
	return NULL;
	}

	return ipi_states[cpu_addr];
	}

	int s390_virtio_hypercall(CPUS390XState *env, uint64_t mem, uint64_t hypercall)
	{
	int r = 0, i;

	dprintf("KVM hypercall: %ld\n", hypercall);
	switch (hypercall) {
	case KVM_S390_VIRTIO_NOTIFY:
	if (mem > ram_size) {
	VirtIOS390Device *dev = s390_virtio_bus_find_vring(s390_bus,
	mem, &i);
	if (dev) {
	virtio_queue_notify(dev->vdev, i);
	} else {
	r = -EINVAL;
	}
	} else {
	/* Early printk */
	}
	break;
	case KVM_S390_VIRTIO_RESET:
	{
	VirtIOS390Device *dev;

	dev = s390_virtio_bus_find_mem(s390_bus, mem);
	virtio_reset(dev->vdev);
	stb_phys(dev->dev_offs + VIRTIO_DEV_OFFS_STATUS, 0);
	s390_virtio_device_sync(dev);
	s390_virtio_reset_idx(dev);
	break;
	}
	case KVM_S390_VIRTIO_SET_STATUS:
	{
	VirtIOS390Device *dev;

	dev = s390_virtio_bus_find_mem(s390_bus, mem);
	if (dev) {
	s390_virtio_device_update_status(dev);
	} else {
	r = -EINVAL;
	}
	break;
	}
	default:
	r = -EINVAL;
	break;
	}

	return r;
	}

	/*
	* The number of running CPUs. On s390 a shutdown is the state of all CPUs
	* being either stopped or disabled (for interrupts) waiting. We have to
	* track this number to call the shutdown sequence accordingly. This
	* number is modified either on startup or while holding the big qemu lock.
	*/
	static unsigned s390_running_cpus;

	void s390_add_running_cpu(CPUS390XState *env)
	{
	if (env->halted) {
	s390_running_cpus++;
	env->halted = 0;
	env->exception_index = -1;
	}
	}

	unsigned s390_del_running_cpu(CPUS390XState *env)
	{
	if (env->halted == 0) {
	assert(s390_running_cpus >= 1);
	s390_running_cpus--;
	env->halted = 1;
	env->exception_index = EXCP_HLT;
	}
	return s390_running_cpus;
	}

	/* PC hardware initialisation */
	static void s390_init(ram_addr_t my_ram_size,
	const char *boot_device,
	const char *kernel_filename,
	const char *kernel_cmdline,
	const char *initrd_filename,
	const char *cpu_model)
	{
	CPUS390XState *env = NULL;
	MemoryRegion *sysmem = get_system_memory();
	MemoryRegion *ram = g_new(MemoryRegion, 1);
	ram_addr_t kernel_size = 0;
	ram_addr_t initrd_offset;
	ram_addr_t initrd_size = 0;
	int shift = 0;
	uint8_t *storage_keys;
	void *virtio_region;
	target_phys_addr_t virtio_region_len;
	target_phys_addr_t virtio_region_start;
	int i;

	/* s390x ram size detection needs a 16bit multiplier + an increment. So
	guests > 64GB can be specified in 2MB steps etc. */
	while ((my_ram_size >> (20 + shift)) > 65535) {
	shift++;
	}
	my_ram_size = my_ram_size >> (20 + shift) << (20 + shift);

	/* lets propagate the changed ram size into the global variable. */
	ram_size = my_ram_size;

	/* get a BUS */
	s390_bus = s390_virtio_bus_init(&my_ram_size);

	/* allocate RAM */
	memory_region_init_ram(ram, "s390.ram", my_ram_size);
	vmstate_register_ram_global(ram);
	memory_region_add_subregion(sysmem, 0, ram);

	/* clear virtio region */
	virtio_region_len = my_ram_size - ram_size;
	virtio_region_start = ram_size;
	virtio_region = cpu_physical_memory_map(virtio_region_start,
	&virtio_region_len, true);
	memset(virtio_region, 0, virtio_region_len);
	cpu_physical_memory_unmap(virtio_region, virtio_region_len, 1,
	virtio_region_len);

	/* allocate storage keys */
	storage_keys = g_malloc0(my_ram_size / TARGET_PAGE_SIZE);

	/* init CPUs */
	if (cpu_model == NULL) {
	cpu_model = "host";
	}

	ipi_states = g_malloc(sizeof(CPUS390XState ) smp_cpus);

	for (i = 0; i < smp_cpus; i++) {
	CPUS390XState *tmp_env;

	tmp_env = cpu_init(cpu_model);
	if (!env) {
	env = tmp_env;
	}
	ipi_states[i] = tmp_env;
	tmp_env->halted = 1;
	tmp_env->exception_index = EXCP_HLT;
	tmp_env->storage_keys = storage_keys;
	}

	/* One CPU has to run */
	s390_add_running_cpu(env);

	if (kernel_filename) {

	kernel_size = load_elf(kernel_filename, NULL, NULL, NULL, NULL,
	NULL, 1, ELF_MACHINE, 0);
	if (kernel_size == -1UL) {
	kernel_size = load_image_targphys(kernel_filename, 0, ram_size);
	}
	if (kernel_size == -1UL) {
	fprintf(stderr, "qemu: could not load kernel '%s'\n",
	kernel_filename);
	exit(1);
	}
	/*
	* we can not rely on the ELF entry point, since up to 3.2 this
	* value was 0x800 (the SALIPL loader) and it wont work. For
	* all (Linux) cases 0x10000 (KERN_IMAGE_START) should be fine.
	*/
	env->psw.addr = KERN_IMAGE_START;
	env->psw.mask = 0x0000000180000000ULL;
	} else {
	ram_addr_t bios_size = 0;
	char *bios_filename;

	/* Load zipl bootloader */
	if (bios_name == NULL) {
	bios_name = ZIPL_FILENAME;
	}

	bios_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
	bios_size = load_image_targphys(bios_filename, ZIPL_LOAD_ADDR, 4096);
	g_free(bios_filename);

	if ((long)bios_size < 0) {
	hw_error("could not load bootloader '%s'\n", bios_name);
	}

	if (bios_size > 4096) {
	hw_error("stage1 bootloader is > 4k\n");
	}

	env->psw.addr = ZIPL_START;
	env->psw.mask = 0x0000000180000000ULL;
	}

	if (initrd_filename) {
	initrd_offset = INITRD_START;
	while (kernel_size + 0x100000 > initrd_offset) {
	initrd_offset += 0x100000;
	}
	initrd_size = load_image_targphys(initrd_filename, initrd_offset,
	ram_size - initrd_offset);
	if (initrd_size == -1UL) {
	fprintf(stderr, "qemu: could not load initrd '%s'\n",
	initrd_filename);
	exit(1);
	}

	/* we have to overwrite values in the kernel image, which are "rom" */
	memcpy(rom_ptr(INITRD_PARM_START), &initrd_offset, 8);
	memcpy(rom_ptr(INITRD_PARM_SIZE), &initrd_size, 8);
	}

	if (rom_ptr(KERN_PARM_AREA)) {
	/* we have to overwrite values in the kernel image, which are "rom" */
	memcpy(rom_ptr(KERN_PARM_AREA), kernel_cmdline,
	strlen(kernel_cmdline) + 1);
	}

	/* Create VirtIO network adapters */
	for(i = 0; i < nb_nics; i++) {
	NICInfo *nd = &nd_table[i];
	DeviceState *dev;

	if (!nd->model) {
	nd->model = g_strdup("virtio");
	}

	if (strcmp(nd->model, "virtio")) {
	fprintf(stderr, "S390 only supports VirtIO nics\n");
	exit(1);
	}

	dev = qdev_create((BusState *)s390_bus, "virtio-net-s390");
	qdev_set_nic_properties(dev, nd);
	qdev_init_nofail(dev);
	}

	/* Create VirtIO disk drives */
	for(i = 0; i < MAX_BLK_DEVS; i++) {
	DriveInfo *dinfo;
	DeviceState *dev;

	dinfo = drive_get(IF_IDE, 0, i);
	if (!dinfo) {
	continue;
	}

	dev = qdev_create((BusState *)s390_bus, "virtio-blk-s390");
	qdev_prop_set_drive_nofail(dev, "drive", dinfo->bdrv);
	qdev_init_nofail(dev);
	}
	}

	static QEMUMachine s390_machine = {
	.name = "s390-virtio",
	.alias = "s390",
	.desc = "VirtIO based S390 machine",
	.init = s390_init,
	.no_cdrom = 1,
	.no_floppy = 1,
	.no_serial = 1,
	.no_parallel = 1,
	.no_sdcard = 1,
	.use_virtcon = 1,
	.max_cpus = 255,
	.is_default = 1,
	};

	static void s390_machine_init(void)
	{
	qemu_register_machine(&s390_machine);
	}

	machine_init(s390_machine_init);