| /* |
| * QEMU Ultrasparc APB PCI host |
| * |
| * Copyright (c) 2006 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| /* XXX This file and most of its contents are somewhat misnamed. The |
| Ultrasparc PCI host is called the PCI Bus Module (PBM). The APB is |
| the secondary PCI bridge. */ |
| |
| #include "sysbus.h" |
| #include "pci.h" |
| #include "pci_host.h" |
| #include "pci_bridge.h" |
| #include "pci_internals.h" |
| #include "apb_pci.h" |
| #include "sysemu.h" |
| #include "exec-memory.h" |
| |
| /* debug APB */ |
| //#define DEBUG_APB |
| |
| #ifdef DEBUG_APB |
| #define APB_DPRINTF(fmt, ...) \ |
| do { printf("APB: " fmt , ## __VA_ARGS__); } while (0) |
| #else |
| #define APB_DPRINTF(fmt, ...) |
| #endif |
| |
| /* |
| * Chipset docs: |
| * PBM: "UltraSPARC IIi User's Manual", |
| * http://www.sun.com/processors/manuals/805-0087.pdf |
| * |
| * APB: "Advanced PCI Bridge (APB) User's Manual", |
| * http://www.sun.com/processors/manuals/805-1251.pdf |
| */ |
| |
| #define PBM_PCI_IMR_MASK 0x7fffffff |
| #define PBM_PCI_IMR_ENABLED 0x80000000 |
| |
| #define POR (1 << 31) |
| #define SOFT_POR (1 << 30) |
| #define SOFT_XIR (1 << 29) |
| #define BTN_POR (1 << 28) |
| #define BTN_XIR (1 << 27) |
| #define RESET_MASK 0xf8000000 |
| #define RESET_WCMASK 0x98000000 |
| #define RESET_WMASK 0x60000000 |
| |
| #define MAX_IVEC 0x30 |
| |
| typedef struct APBState { |
| SysBusDevice busdev; |
| PCIBus *bus; |
| MemoryRegion apb_config; |
| MemoryRegion pci_config; |
| MemoryRegion pci_mmio; |
| MemoryRegion pci_ioport; |
| uint32_t iommu[4]; |
| uint32_t pci_control[16]; |
| uint32_t pci_irq_map[8]; |
| uint32_t obio_irq_map[32]; |
| qemu_irq *pbm_irqs; |
| qemu_irq *ivec_irqs; |
| uint32_t reset_control; |
| unsigned int nr_resets; |
| } APBState; |
| |
| static void apb_config_writel (void *opaque, target_phys_addr_t addr, |
| uint64_t val, unsigned size) |
| { |
| APBState *s = opaque; |
| |
| APB_DPRINTF("%s: addr " TARGET_FMT_lx " val %" PRIx64 "\n", __func__, addr, val); |
| |
| switch (addr & 0xffff) { |
| case 0x30 ... 0x4f: /* DMA error registers */ |
| /* XXX: not implemented yet */ |
| break; |
| case 0x200 ... 0x20b: /* IOMMU */ |
| s->iommu[(addr & 0xf) >> 2] = val; |
| break; |
| case 0x20c ... 0x3ff: /* IOMMU flush */ |
| break; |
| case 0xc00 ... 0xc3f: /* PCI interrupt control */ |
| if (addr & 4) { |
| s->pci_irq_map[(addr & 0x3f) >> 3] &= PBM_PCI_IMR_MASK; |
| s->pci_irq_map[(addr & 0x3f) >> 3] |= val & ~PBM_PCI_IMR_MASK; |
| } |
| break; |
| case 0x1000 ... 0x1080: /* OBIO interrupt control */ |
| if (addr & 4) { |
| s->obio_irq_map[(addr & 0xff) >> 3] &= PBM_PCI_IMR_MASK; |
| s->obio_irq_map[(addr & 0xff) >> 3] |= val & ~PBM_PCI_IMR_MASK; |
| } |
| break; |
| case 0x2000 ... 0x202f: /* PCI control */ |
| s->pci_control[(addr & 0x3f) >> 2] = val; |
| break; |
| case 0xf020 ... 0xf027: /* Reset control */ |
| if (addr & 4) { |
| val &= RESET_MASK; |
| s->reset_control &= ~(val & RESET_WCMASK); |
| s->reset_control |= val & RESET_WMASK; |
| if (val & SOFT_POR) { |
| s->nr_resets = 0; |
| qemu_system_reset_request(); |
| } else if (val & SOFT_XIR) { |
| qemu_system_reset_request(); |
| } |
| } |
| break; |
| case 0x5000 ... 0x51cf: /* PIO/DMA diagnostics */ |
| case 0xa400 ... 0xa67f: /* IOMMU diagnostics */ |
| case 0xa800 ... 0xa80f: /* Interrupt diagnostics */ |
| case 0xf000 ... 0xf01f: /* FFB config, memory control */ |
| /* we don't care */ |
| default: |
| break; |
| } |
| } |
| |
| static uint64_t apb_config_readl (void *opaque, |
| target_phys_addr_t addr, unsigned size) |
| { |
| APBState *s = opaque; |
| uint32_t val; |
| |
| switch (addr & 0xffff) { |
| case 0x30 ... 0x4f: /* DMA error registers */ |
| val = 0; |
| /* XXX: not implemented yet */ |
| break; |
| case 0x200 ... 0x20b: /* IOMMU */ |
| val = s->iommu[(addr & 0xf) >> 2]; |
| break; |
| case 0x20c ... 0x3ff: /* IOMMU flush */ |
| val = 0; |
| break; |
| case 0xc00 ... 0xc3f: /* PCI interrupt control */ |
| if (addr & 4) { |
| val = s->pci_irq_map[(addr & 0x3f) >> 3]; |
| } else { |
| val = 0; |
| } |
| break; |
| case 0x1000 ... 0x1080: /* OBIO interrupt control */ |
| if (addr & 4) { |
| val = s->obio_irq_map[(addr & 0xff) >> 3]; |
| } else { |
| val = 0; |
| } |
| break; |
| case 0x2000 ... 0x202f: /* PCI control */ |
| val = s->pci_control[(addr & 0x3f) >> 2]; |
| break; |
| case 0xf020 ... 0xf027: /* Reset control */ |
| if (addr & 4) { |
| val = s->reset_control; |
| } else { |
| val = 0; |
| } |
| break; |
| case 0x5000 ... 0x51cf: /* PIO/DMA diagnostics */ |
| case 0xa400 ... 0xa67f: /* IOMMU diagnostics */ |
| case 0xa800 ... 0xa80f: /* Interrupt diagnostics */ |
| case 0xf000 ... 0xf01f: /* FFB config, memory control */ |
| /* we don't care */ |
| default: |
| val = 0; |
| break; |
| } |
| APB_DPRINTF("%s: addr " TARGET_FMT_lx " -> %x\n", __func__, addr, val); |
| |
| return val; |
| } |
| |
| static const MemoryRegionOps apb_config_ops = { |
| .read = apb_config_readl, |
| .write = apb_config_writel, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void apb_pci_config_write(void *opaque, target_phys_addr_t addr, |
| uint64_t val, unsigned size) |
| { |
| APBState *s = opaque; |
| |
| val = qemu_bswap_len(val, size); |
| APB_DPRINTF("%s: addr " TARGET_FMT_lx " val %" PRIx64 "\n", __func__, addr, val); |
| pci_data_write(s->bus, addr, val, size); |
| } |
| |
| static uint64_t apb_pci_config_read(void *opaque, target_phys_addr_t addr, |
| unsigned size) |
| { |
| uint32_t ret; |
| APBState *s = opaque; |
| |
| ret = pci_data_read(s->bus, addr, size); |
| ret = qemu_bswap_len(ret, size); |
| APB_DPRINTF("%s: addr " TARGET_FMT_lx " -> %x\n", __func__, addr, ret); |
| return ret; |
| } |
| |
| static void pci_apb_iowriteb (void *opaque, target_phys_addr_t addr, |
| uint32_t val) |
| { |
| cpu_outb(addr & IOPORTS_MASK, val); |
| } |
| |
| static void pci_apb_iowritew (void *opaque, target_phys_addr_t addr, |
| uint32_t val) |
| { |
| cpu_outw(addr & IOPORTS_MASK, bswap16(val)); |
| } |
| |
| static void pci_apb_iowritel (void *opaque, target_phys_addr_t addr, |
| uint32_t val) |
| { |
| cpu_outl(addr & IOPORTS_MASK, bswap32(val)); |
| } |
| |
| static uint32_t pci_apb_ioreadb (void *opaque, target_phys_addr_t addr) |
| { |
| uint32_t val; |
| |
| val = cpu_inb(addr & IOPORTS_MASK); |
| return val; |
| } |
| |
| static uint32_t pci_apb_ioreadw (void *opaque, target_phys_addr_t addr) |
| { |
| uint32_t val; |
| |
| val = bswap16(cpu_inw(addr & IOPORTS_MASK)); |
| return val; |
| } |
| |
| static uint32_t pci_apb_ioreadl (void *opaque, target_phys_addr_t addr) |
| { |
| uint32_t val; |
| |
| val = bswap32(cpu_inl(addr & IOPORTS_MASK)); |
| return val; |
| } |
| |
| static const MemoryRegionOps pci_ioport_ops = { |
| .old_mmio = { |
| .read = { pci_apb_ioreadb, pci_apb_ioreadw, pci_apb_ioreadl }, |
| .write = { pci_apb_iowriteb, pci_apb_iowritew, pci_apb_iowritel, }, |
| }, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| /* The APB host has an IRQ line for each IRQ line of each slot. */ |
| static int pci_apb_map_irq(PCIDevice *pci_dev, int irq_num) |
| { |
| return ((pci_dev->devfn & 0x18) >> 1) + irq_num; |
| } |
| |
| static int pci_pbm_map_irq(PCIDevice *pci_dev, int irq_num) |
| { |
| int bus_offset; |
| if (pci_dev->devfn & 1) |
| bus_offset = 16; |
| else |
| bus_offset = 0; |
| return bus_offset + irq_num; |
| } |
| |
| static void pci_apb_set_irq(void *opaque, int irq_num, int level) |
| { |
| APBState *s = opaque; |
| |
| /* PCI IRQ map onto the first 32 INO. */ |
| if (irq_num < 32) { |
| if (s->pci_irq_map[irq_num >> 2] & PBM_PCI_IMR_ENABLED) { |
| APB_DPRINTF("%s: set irq %d level %d\n", __func__, irq_num, level); |
| qemu_set_irq(s->ivec_irqs[irq_num], level); |
| } else { |
| APB_DPRINTF("%s: not enabled: lower irq %d\n", __func__, irq_num); |
| qemu_irq_lower(s->ivec_irqs[irq_num]); |
| } |
| } else { |
| /* OBIO IRQ map onto the next 16 INO. */ |
| if (s->obio_irq_map[irq_num - 32] & PBM_PCI_IMR_ENABLED) { |
| APB_DPRINTF("%s: set irq %d level %d\n", __func__, irq_num, level); |
| qemu_set_irq(s->ivec_irqs[irq_num], level); |
| } else { |
| APB_DPRINTF("%s: not enabled: lower irq %d\n", __func__, irq_num); |
| qemu_irq_lower(s->ivec_irqs[irq_num]); |
| } |
| } |
| } |
| |
| static int apb_pci_bridge_initfn(PCIDevice *dev) |
| { |
| int rc; |
| |
| rc = pci_bridge_initfn(dev); |
| if (rc < 0) { |
| return rc; |
| } |
| |
| /* |
| * command register: |
| * According to PCI bridge spec, after reset |
| * bus master bit is off |
| * memory space enable bit is off |
| * According to manual (805-1251.pdf). |
| * the reset value should be zero unless the boot pin is tied high |
| * (which is true) and thus it should be PCI_COMMAND_MEMORY. |
| */ |
| pci_set_word(dev->config + PCI_COMMAND, |
| PCI_COMMAND_MEMORY); |
| pci_set_word(dev->config + PCI_STATUS, |
| PCI_STATUS_FAST_BACK | PCI_STATUS_66MHZ | |
| PCI_STATUS_DEVSEL_MEDIUM); |
| return 0; |
| } |
| |
| PCIBus *pci_apb_init(target_phys_addr_t special_base, |
| target_phys_addr_t mem_base, |
| qemu_irq *ivec_irqs, PCIBus **bus2, PCIBus **bus3, |
| qemu_irq **pbm_irqs) |
| { |
| DeviceState *dev; |
| SysBusDevice *s; |
| APBState *d; |
| PCIDevice *pci_dev; |
| PCIBridge *br; |
| |
| /* Ultrasparc PBM main bus */ |
| dev = qdev_create(NULL, "pbm"); |
| qdev_init_nofail(dev); |
| s = sysbus_from_qdev(dev); |
| /* apb_config */ |
| sysbus_mmio_map(s, 0, special_base); |
| /* PCI configuration space */ |
| sysbus_mmio_map(s, 1, special_base + 0x1000000ULL); |
| /* pci_ioport */ |
| sysbus_mmio_map(s, 2, special_base + 0x2000000ULL); |
| d = FROM_SYSBUS(APBState, s); |
| |
| memory_region_init(&d->pci_mmio, "pci-mmio", 0x100000000ULL); |
| memory_region_add_subregion(get_system_memory(), mem_base, &d->pci_mmio); |
| |
| d->bus = pci_register_bus(&d->busdev.qdev, "pci", |
| pci_apb_set_irq, pci_pbm_map_irq, d, |
| &d->pci_mmio, |
| get_system_io(), |
| 0, 32); |
| |
| *pbm_irqs = d->pbm_irqs; |
| d->ivec_irqs = ivec_irqs; |
| |
| pci_create_simple(d->bus, 0, "pbm-pci"); |
| |
| /* APB secondary busses */ |
| pci_dev = pci_create_multifunction(d->bus, PCI_DEVFN(1, 0), true, |
| "pbm-bridge"); |
| br = DO_UPCAST(PCIBridge, dev, pci_dev); |
| pci_bridge_map_irq(br, "Advanced PCI Bus secondary bridge 1", |
| pci_apb_map_irq); |
| qdev_init_nofail(&pci_dev->qdev); |
| *bus2 = pci_bridge_get_sec_bus(br); |
| |
| pci_dev = pci_create_multifunction(d->bus, PCI_DEVFN(1, 1), true, |
| "pbm-bridge"); |
| br = DO_UPCAST(PCIBridge, dev, pci_dev); |
| pci_bridge_map_irq(br, "Advanced PCI Bus secondary bridge 2", |
| pci_apb_map_irq); |
| qdev_init_nofail(&pci_dev->qdev); |
| *bus3 = pci_bridge_get_sec_bus(br); |
| |
| return d->bus; |
| } |
| |
| static void pci_pbm_reset(DeviceState *d) |
| { |
| unsigned int i; |
| APBState *s = container_of(d, APBState, busdev.qdev); |
| |
| for (i = 0; i < 8; i++) { |
| s->pci_irq_map[i] &= PBM_PCI_IMR_MASK; |
| } |
| |
| if (s->nr_resets++ == 0) { |
| /* Power on reset */ |
| s->reset_control = POR; |
| } |
| } |
| |
| static const MemoryRegionOps pci_config_ops = { |
| .read = apb_pci_config_read, |
| .write = apb_pci_config_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static int pci_pbm_init_device(SysBusDevice *dev) |
| { |
| APBState *s; |
| unsigned int i; |
| |
| s = FROM_SYSBUS(APBState, dev); |
| for (i = 0; i < 8; i++) { |
| s->pci_irq_map[i] = (0x1f << 6) | (i << 2); |
| } |
| s->pbm_irqs = qemu_allocate_irqs(pci_apb_set_irq, s, MAX_IVEC); |
| |
| /* apb_config */ |
| memory_region_init_io(&s->apb_config, &apb_config_ops, s, "apb-config", |
| 0x10000); |
| /* at region 0 */ |
| sysbus_init_mmio(dev, &s->apb_config); |
| |
| memory_region_init_io(&s->pci_config, &pci_config_ops, s, "apb-pci-config", |
| 0x1000000); |
| /* at region 1 */ |
| sysbus_init_mmio(dev, &s->pci_config); |
| |
| /* pci_ioport */ |
| memory_region_init_io(&s->pci_ioport, &pci_ioport_ops, s, |
| "apb-pci-ioport", 0x10000); |
| /* at region 2 */ |
| sysbus_init_mmio(dev, &s->pci_ioport); |
| |
| return 0; |
| } |
| |
| static int pbm_pci_host_init(PCIDevice *d) |
| { |
| pci_set_word(d->config + PCI_COMMAND, |
| PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); |
| pci_set_word(d->config + PCI_STATUS, |
| PCI_STATUS_FAST_BACK | PCI_STATUS_66MHZ | |
| PCI_STATUS_DEVSEL_MEDIUM); |
| return 0; |
| } |
| |
| static void pbm_pci_host_class_init(ObjectClass *klass, void *data) |
| { |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| k->init = pbm_pci_host_init; |
| k->vendor_id = PCI_VENDOR_ID_SUN; |
| k->device_id = PCI_DEVICE_ID_SUN_SABRE; |
| k->class_id = PCI_CLASS_BRIDGE_HOST; |
| } |
| |
| static TypeInfo pbm_pci_host_info = { |
| .name = "pbm-pci", |
| .parent = TYPE_PCI_DEVICE, |
| .instance_size = sizeof(PCIDevice), |
| .class_init = pbm_pci_host_class_init, |
| }; |
| |
| static void pbm_host_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); |
| |
| k->init = pci_pbm_init_device; |
| dc->reset = pci_pbm_reset; |
| } |
| |
| static TypeInfo pbm_host_info = { |
| .name = "pbm", |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(APBState), |
| .class_init = pbm_host_class_init, |
| }; |
| |
| static void pbm_pci_bridge_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| k->init = apb_pci_bridge_initfn; |
| k->exit = pci_bridge_exitfn; |
| k->vendor_id = PCI_VENDOR_ID_SUN; |
| k->device_id = PCI_DEVICE_ID_SUN_SIMBA; |
| k->revision = 0x11; |
| k->config_write = pci_bridge_write_config; |
| k->is_bridge = 1; |
| dc->reset = pci_bridge_reset; |
| dc->vmsd = &vmstate_pci_device; |
| } |
| |
| static TypeInfo pbm_pci_bridge_info = { |
| .name = "pbm-bridge", |
| .parent = TYPE_PCI_DEVICE, |
| .instance_size = sizeof(PCIBridge), |
| .class_init = pbm_pci_bridge_class_init, |
| }; |
| |
| static void pbm_register_types(void) |
| { |
| type_register_static(&pbm_host_info); |
| type_register_static(&pbm_pci_host_info); |
| type_register_static(&pbm_pci_bridge_info); |
| } |
| |
| type_init(pbm_register_types) |