| /* |
| * OMAP2 Display Subsystem. |
| * |
| * Copyright (C) 2008 Nokia Corporation |
| * Written by Andrzej Zaborowski <andrew@openedhand.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 or |
| * (at your option) version 3 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| #include "hw.h" |
| #include "console.h" |
| #include "omap.h" |
| |
| struct omap_dss_s { |
| qemu_irq irq; |
| qemu_irq drq; |
| DisplayState *state; |
| |
| int autoidle; |
| int control; |
| int enable; |
| |
| struct omap_dss_panel_s { |
| int enable; |
| int nx; |
| int ny; |
| |
| int x; |
| int y; |
| } dig, lcd; |
| |
| struct { |
| uint32_t idlemode; |
| uint32_t irqst; |
| uint32_t irqen; |
| uint32_t control; |
| uint32_t config; |
| uint32_t capable; |
| uint32_t timing[4]; |
| int line; |
| uint32_t bg[2]; |
| uint32_t trans[2]; |
| |
| struct omap_dss_plane_s { |
| int enable; |
| int bpp; |
| int posx; |
| int posy; |
| int nx; |
| int ny; |
| |
| target_phys_addr_t addr[3]; |
| |
| uint32_t attr; |
| uint32_t tresh; |
| int rowinc; |
| int colinc; |
| int wininc; |
| } l[3]; |
| |
| int invalidate; |
| uint16_t palette[256]; |
| } dispc; |
| |
| struct { |
| int idlemode; |
| uint32_t control; |
| int enable; |
| int pixels; |
| int busy; |
| int skiplines; |
| uint16_t rxbuf; |
| uint32_t config[2]; |
| uint32_t time[4]; |
| uint32_t data[6]; |
| uint16_t vsync; |
| uint16_t hsync; |
| struct rfbi_chip_s *chip[2]; |
| } rfbi; |
| }; |
| |
| static void omap_dispc_interrupt_update(struct omap_dss_s *s) |
| { |
| qemu_set_irq(s->irq, s->dispc.irqst & s->dispc.irqen); |
| } |
| |
| static void omap_rfbi_reset(struct omap_dss_s *s) |
| { |
| s->rfbi.idlemode = 0; |
| s->rfbi.control = 2; |
| s->rfbi.enable = 0; |
| s->rfbi.pixels = 0; |
| s->rfbi.skiplines = 0; |
| s->rfbi.busy = 0; |
| s->rfbi.config[0] = 0x00310000; |
| s->rfbi.config[1] = 0x00310000; |
| s->rfbi.time[0] = 0; |
| s->rfbi.time[1] = 0; |
| s->rfbi.time[2] = 0; |
| s->rfbi.time[3] = 0; |
| s->rfbi.data[0] = 0; |
| s->rfbi.data[1] = 0; |
| s->rfbi.data[2] = 0; |
| s->rfbi.data[3] = 0; |
| s->rfbi.data[4] = 0; |
| s->rfbi.data[5] = 0; |
| s->rfbi.vsync = 0; |
| s->rfbi.hsync = 0; |
| } |
| |
| void omap_dss_reset(struct omap_dss_s *s) |
| { |
| s->autoidle = 0; |
| s->control = 0; |
| s->enable = 0; |
| |
| s->dig.enable = 0; |
| s->dig.nx = 1; |
| s->dig.ny = 1; |
| |
| s->lcd.enable = 0; |
| s->lcd.nx = 1; |
| s->lcd.ny = 1; |
| |
| s->dispc.idlemode = 0; |
| s->dispc.irqst = 0; |
| s->dispc.irqen = 0; |
| s->dispc.control = 0; |
| s->dispc.config = 0; |
| s->dispc.capable = 0x161; |
| s->dispc.timing[0] = 0; |
| s->dispc.timing[1] = 0; |
| s->dispc.timing[2] = 0; |
| s->dispc.timing[3] = 0; |
| s->dispc.line = 0; |
| s->dispc.bg[0] = 0; |
| s->dispc.bg[1] = 0; |
| s->dispc.trans[0] = 0; |
| s->dispc.trans[1] = 0; |
| |
| s->dispc.l[0].enable = 0; |
| s->dispc.l[0].bpp = 0; |
| s->dispc.l[0].addr[0] = 0; |
| s->dispc.l[0].addr[1] = 0; |
| s->dispc.l[0].addr[2] = 0; |
| s->dispc.l[0].posx = 0; |
| s->dispc.l[0].posy = 0; |
| s->dispc.l[0].nx = 1; |
| s->dispc.l[0].ny = 1; |
| s->dispc.l[0].attr = 0; |
| s->dispc.l[0].tresh = 0; |
| s->dispc.l[0].rowinc = 1; |
| s->dispc.l[0].colinc = 1; |
| s->dispc.l[0].wininc = 0; |
| |
| omap_rfbi_reset(s); |
| omap_dispc_interrupt_update(s); |
| } |
| |
| static uint32_t omap_diss_read(void *opaque, target_phys_addr_t addr) |
| { |
| struct omap_dss_s *s = (struct omap_dss_s *) opaque; |
| |
| switch (addr) { |
| case 0x00: /* DSS_REVISIONNUMBER */ |
| return 0x20; |
| |
| case 0x10: /* DSS_SYSCONFIG */ |
| return s->autoidle; |
| |
| case 0x14: /* DSS_SYSSTATUS */ |
| return 1; /* RESETDONE */ |
| |
| case 0x40: /* DSS_CONTROL */ |
| return s->control; |
| |
| case 0x50: /* DSS_PSA_LCD_REG_1 */ |
| case 0x54: /* DSS_PSA_LCD_REG_2 */ |
| case 0x58: /* DSS_PSA_VIDEO_REG */ |
| /* TODO: fake some values when appropriate s->control bits are set */ |
| return 0; |
| |
| case 0x5c: /* DSS_STATUS */ |
| return 1 + (s->control & 1); |
| |
| default: |
| break; |
| } |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_diss_write(void *opaque, target_phys_addr_t addr, |
| uint32_t value) |
| { |
| struct omap_dss_s *s = (struct omap_dss_s *) opaque; |
| |
| switch (addr) { |
| case 0x00: /* DSS_REVISIONNUMBER */ |
| case 0x14: /* DSS_SYSSTATUS */ |
| case 0x50: /* DSS_PSA_LCD_REG_1 */ |
| case 0x54: /* DSS_PSA_LCD_REG_2 */ |
| case 0x58: /* DSS_PSA_VIDEO_REG */ |
| case 0x5c: /* DSS_STATUS */ |
| OMAP_RO_REG(addr); |
| break; |
| |
| case 0x10: /* DSS_SYSCONFIG */ |
| if (value & 2) /* SOFTRESET */ |
| omap_dss_reset(s); |
| s->autoidle = value & 1; |
| break; |
| |
| case 0x40: /* DSS_CONTROL */ |
| s->control = value & 0x3dd; |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| } |
| } |
| |
| static CPUReadMemoryFunc * const omap_diss1_readfn[] = { |
| omap_badwidth_read32, |
| omap_badwidth_read32, |
| omap_diss_read, |
| }; |
| |
| static CPUWriteMemoryFunc * const omap_diss1_writefn[] = { |
| omap_badwidth_write32, |
| omap_badwidth_write32, |
| omap_diss_write, |
| }; |
| |
| static uint32_t omap_disc_read(void *opaque, target_phys_addr_t addr) |
| { |
| struct omap_dss_s *s = (struct omap_dss_s *) opaque; |
| |
| switch (addr) { |
| case 0x000: /* DISPC_REVISION */ |
| return 0x20; |
| |
| case 0x010: /* DISPC_SYSCONFIG */ |
| return s->dispc.idlemode; |
| |
| case 0x014: /* DISPC_SYSSTATUS */ |
| return 1; /* RESETDONE */ |
| |
| case 0x018: /* DISPC_IRQSTATUS */ |
| return s->dispc.irqst; |
| |
| case 0x01c: /* DISPC_IRQENABLE */ |
| return s->dispc.irqen; |
| |
| case 0x040: /* DISPC_CONTROL */ |
| return s->dispc.control; |
| |
| case 0x044: /* DISPC_CONFIG */ |
| return s->dispc.config; |
| |
| case 0x048: /* DISPC_CAPABLE */ |
| return s->dispc.capable; |
| |
| case 0x04c: /* DISPC_DEFAULT_COLOR0 */ |
| return s->dispc.bg[0]; |
| case 0x050: /* DISPC_DEFAULT_COLOR1 */ |
| return s->dispc.bg[1]; |
| case 0x054: /* DISPC_TRANS_COLOR0 */ |
| return s->dispc.trans[0]; |
| case 0x058: /* DISPC_TRANS_COLOR1 */ |
| return s->dispc.trans[1]; |
| |
| case 0x05c: /* DISPC_LINE_STATUS */ |
| return 0x7ff; |
| case 0x060: /* DISPC_LINE_NUMBER */ |
| return s->dispc.line; |
| |
| case 0x064: /* DISPC_TIMING_H */ |
| return s->dispc.timing[0]; |
| case 0x068: /* DISPC_TIMING_V */ |
| return s->dispc.timing[1]; |
| case 0x06c: /* DISPC_POL_FREQ */ |
| return s->dispc.timing[2]; |
| case 0x070: /* DISPC_DIVISOR */ |
| return s->dispc.timing[3]; |
| |
| case 0x078: /* DISPC_SIZE_DIG */ |
| return ((s->dig.ny - 1) << 16) | (s->dig.nx - 1); |
| case 0x07c: /* DISPC_SIZE_LCD */ |
| return ((s->lcd.ny - 1) << 16) | (s->lcd.nx - 1); |
| |
| case 0x080: /* DISPC_GFX_BA0 */ |
| return s->dispc.l[0].addr[0]; |
| case 0x084: /* DISPC_GFX_BA1 */ |
| return s->dispc.l[0].addr[1]; |
| case 0x088: /* DISPC_GFX_POSITION */ |
| return (s->dispc.l[0].posy << 16) | s->dispc.l[0].posx; |
| case 0x08c: /* DISPC_GFX_SIZE */ |
| return ((s->dispc.l[0].ny - 1) << 16) | (s->dispc.l[0].nx - 1); |
| case 0x0a0: /* DISPC_GFX_ATTRIBUTES */ |
| return s->dispc.l[0].attr; |
| case 0x0a4: /* DISPC_GFX_FIFO_TRESHOLD */ |
| return s->dispc.l[0].tresh; |
| case 0x0a8: /* DISPC_GFX_FIFO_SIZE_STATUS */ |
| return 256; |
| case 0x0ac: /* DISPC_GFX_ROW_INC */ |
| return s->dispc.l[0].rowinc; |
| case 0x0b0: /* DISPC_GFX_PIXEL_INC */ |
| return s->dispc.l[0].colinc; |
| case 0x0b4: /* DISPC_GFX_WINDOW_SKIP */ |
| return s->dispc.l[0].wininc; |
| case 0x0b8: /* DISPC_GFX_TABLE_BA */ |
| return s->dispc.l[0].addr[2]; |
| |
| case 0x0bc: /* DISPC_VID1_BA0 */ |
| case 0x0c0: /* DISPC_VID1_BA1 */ |
| case 0x0c4: /* DISPC_VID1_POSITION */ |
| case 0x0c8: /* DISPC_VID1_SIZE */ |
| case 0x0cc: /* DISPC_VID1_ATTRIBUTES */ |
| case 0x0d0: /* DISPC_VID1_FIFO_TRESHOLD */ |
| case 0x0d4: /* DISPC_VID1_FIFO_SIZE_STATUS */ |
| case 0x0d8: /* DISPC_VID1_ROW_INC */ |
| case 0x0dc: /* DISPC_VID1_PIXEL_INC */ |
| case 0x0e0: /* DISPC_VID1_FIR */ |
| case 0x0e4: /* DISPC_VID1_PICTURE_SIZE */ |
| case 0x0e8: /* DISPC_VID1_ACCU0 */ |
| case 0x0ec: /* DISPC_VID1_ACCU1 */ |
| case 0x0f0 ... 0x140: /* DISPC_VID1_FIR_COEF, DISPC_VID1_CONV_COEF */ |
| case 0x14c: /* DISPC_VID2_BA0 */ |
| case 0x150: /* DISPC_VID2_BA1 */ |
| case 0x154: /* DISPC_VID2_POSITION */ |
| case 0x158: /* DISPC_VID2_SIZE */ |
| case 0x15c: /* DISPC_VID2_ATTRIBUTES */ |
| case 0x160: /* DISPC_VID2_FIFO_TRESHOLD */ |
| case 0x164: /* DISPC_VID2_FIFO_SIZE_STATUS */ |
| case 0x168: /* DISPC_VID2_ROW_INC */ |
| case 0x16c: /* DISPC_VID2_PIXEL_INC */ |
| case 0x170: /* DISPC_VID2_FIR */ |
| case 0x174: /* DISPC_VID2_PICTURE_SIZE */ |
| case 0x178: /* DISPC_VID2_ACCU0 */ |
| case 0x17c: /* DISPC_VID2_ACCU1 */ |
| case 0x180 ... 0x1d0: /* DISPC_VID2_FIR_COEF, DISPC_VID2_CONV_COEF */ |
| case 0x1d4: /* DISPC_DATA_CYCLE1 */ |
| case 0x1d8: /* DISPC_DATA_CYCLE2 */ |
| case 0x1dc: /* DISPC_DATA_CYCLE3 */ |
| return 0; |
| |
| default: |
| break; |
| } |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_disc_write(void *opaque, target_phys_addr_t addr, |
| uint32_t value) |
| { |
| struct omap_dss_s *s = (struct omap_dss_s *) opaque; |
| |
| switch (addr) { |
| case 0x010: /* DISPC_SYSCONFIG */ |
| if (value & 2) /* SOFTRESET */ |
| omap_dss_reset(s); |
| s->dispc.idlemode = value & 0x301b; |
| break; |
| |
| case 0x018: /* DISPC_IRQSTATUS */ |
| s->dispc.irqst &= ~value; |
| omap_dispc_interrupt_update(s); |
| break; |
| |
| case 0x01c: /* DISPC_IRQENABLE */ |
| s->dispc.irqen = value & 0xffff; |
| omap_dispc_interrupt_update(s); |
| break; |
| |
| case 0x040: /* DISPC_CONTROL */ |
| s->dispc.control = value & 0x07ff9fff; |
| s->dig.enable = (value >> 1) & 1; |
| s->lcd.enable = (value >> 0) & 1; |
| if (value & (1 << 12)) /* OVERLAY_OPTIMIZATION */ |
| if (~((s->dispc.l[1].attr | s->dispc.l[2].attr) & 1)) |
| fprintf(stderr, "%s: Overlay Optimization when no overlay " |
| "region effectively exists leads to " |
| "unpredictable behaviour!\n", __FUNCTION__); |
| if (value & (1 << 6)) { /* GODIGITAL */ |
| /* XXX: Shadowed fields are: |
| * s->dispc.config |
| * s->dispc.capable |
| * s->dispc.bg[0] |
| * s->dispc.bg[1] |
| * s->dispc.trans[0] |
| * s->dispc.trans[1] |
| * s->dispc.line |
| * s->dispc.timing[0] |
| * s->dispc.timing[1] |
| * s->dispc.timing[2] |
| * s->dispc.timing[3] |
| * s->lcd.nx |
| * s->lcd.ny |
| * s->dig.nx |
| * s->dig.ny |
| * s->dispc.l[0].addr[0] |
| * s->dispc.l[0].addr[1] |
| * s->dispc.l[0].addr[2] |
| * s->dispc.l[0].posx |
| * s->dispc.l[0].posy |
| * s->dispc.l[0].nx |
| * s->dispc.l[0].ny |
| * s->dispc.l[0].tresh |
| * s->dispc.l[0].rowinc |
| * s->dispc.l[0].colinc |
| * s->dispc.l[0].wininc |
| * All they need to be loaded here from their shadow registers. |
| */ |
| } |
| if (value & (1 << 5)) { /* GOLCD */ |
| /* XXX: Likewise for LCD here. */ |
| } |
| s->dispc.invalidate = 1; |
| break; |
| |
| case 0x044: /* DISPC_CONFIG */ |
| s->dispc.config = value & 0x3fff; |
| /* XXX: |
| * bits 2:1 (LOADMODE) reset to 0 after set to 1 and palette loaded |
| * bits 2:1 (LOADMODE) reset to 2 after set to 3 and palette loaded |
| */ |
| s->dispc.invalidate = 1; |
| break; |
| |
| case 0x048: /* DISPC_CAPABLE */ |
| s->dispc.capable = value & 0x3ff; |
| break; |
| |
| case 0x04c: /* DISPC_DEFAULT_COLOR0 */ |
| s->dispc.bg[0] = value & 0xffffff; |
| s->dispc.invalidate = 1; |
| break; |
| case 0x050: /* DISPC_DEFAULT_COLOR1 */ |
| s->dispc.bg[1] = value & 0xffffff; |
| s->dispc.invalidate = 1; |
| break; |
| case 0x054: /* DISPC_TRANS_COLOR0 */ |
| s->dispc.trans[0] = value & 0xffffff; |
| s->dispc.invalidate = 1; |
| break; |
| case 0x058: /* DISPC_TRANS_COLOR1 */ |
| s->dispc.trans[1] = value & 0xffffff; |
| s->dispc.invalidate = 1; |
| break; |
| |
| case 0x060: /* DISPC_LINE_NUMBER */ |
| s->dispc.line = value & 0x7ff; |
| break; |
| |
| case 0x064: /* DISPC_TIMING_H */ |
| s->dispc.timing[0] = value & 0x0ff0ff3f; |
| break; |
| case 0x068: /* DISPC_TIMING_V */ |
| s->dispc.timing[1] = value & 0x0ff0ff3f; |
| break; |
| case 0x06c: /* DISPC_POL_FREQ */ |
| s->dispc.timing[2] = value & 0x0003ffff; |
| break; |
| case 0x070: /* DISPC_DIVISOR */ |
| s->dispc.timing[3] = value & 0x00ff00ff; |
| break; |
| |
| case 0x078: /* DISPC_SIZE_DIG */ |
| s->dig.nx = ((value >> 0) & 0x7ff) + 1; /* PPL */ |
| s->dig.ny = ((value >> 16) & 0x7ff) + 1; /* LPP */ |
| s->dispc.invalidate = 1; |
| break; |
| case 0x07c: /* DISPC_SIZE_LCD */ |
| s->lcd.nx = ((value >> 0) & 0x7ff) + 1; /* PPL */ |
| s->lcd.ny = ((value >> 16) & 0x7ff) + 1; /* LPP */ |
| s->dispc.invalidate = 1; |
| break; |
| case 0x080: /* DISPC_GFX_BA0 */ |
| s->dispc.l[0].addr[0] = (target_phys_addr_t) value; |
| s->dispc.invalidate = 1; |
| break; |
| case 0x084: /* DISPC_GFX_BA1 */ |
| s->dispc.l[0].addr[1] = (target_phys_addr_t) value; |
| s->dispc.invalidate = 1; |
| break; |
| case 0x088: /* DISPC_GFX_POSITION */ |
| s->dispc.l[0].posx = ((value >> 0) & 0x7ff); /* GFXPOSX */ |
| s->dispc.l[0].posy = ((value >> 16) & 0x7ff); /* GFXPOSY */ |
| s->dispc.invalidate = 1; |
| break; |
| case 0x08c: /* DISPC_GFX_SIZE */ |
| s->dispc.l[0].nx = ((value >> 0) & 0x7ff) + 1; /* GFXSIZEX */ |
| s->dispc.l[0].ny = ((value >> 16) & 0x7ff) + 1; /* GFXSIZEY */ |
| s->dispc.invalidate = 1; |
| break; |
| case 0x0a0: /* DISPC_GFX_ATTRIBUTES */ |
| s->dispc.l[0].attr = value & 0x7ff; |
| if (value & (3 << 9)) |
| fprintf(stderr, "%s: Big-endian pixel format not supported\n", |
| __FUNCTION__); |
| s->dispc.l[0].enable = value & 1; |
| s->dispc.l[0].bpp = (value >> 1) & 0xf; |
| s->dispc.invalidate = 1; |
| break; |
| case 0x0a4: /* DISPC_GFX_FIFO_TRESHOLD */ |
| s->dispc.l[0].tresh = value & 0x01ff01ff; |
| break; |
| case 0x0ac: /* DISPC_GFX_ROW_INC */ |
| s->dispc.l[0].rowinc = value; |
| s->dispc.invalidate = 1; |
| break; |
| case 0x0b0: /* DISPC_GFX_PIXEL_INC */ |
| s->dispc.l[0].colinc = value; |
| s->dispc.invalidate = 1; |
| break; |
| case 0x0b4: /* DISPC_GFX_WINDOW_SKIP */ |
| s->dispc.l[0].wininc = value; |
| break; |
| case 0x0b8: /* DISPC_GFX_TABLE_BA */ |
| s->dispc.l[0].addr[2] = (target_phys_addr_t) value; |
| s->dispc.invalidate = 1; |
| break; |
| |
| case 0x0bc: /* DISPC_VID1_BA0 */ |
| case 0x0c0: /* DISPC_VID1_BA1 */ |
| case 0x0c4: /* DISPC_VID1_POSITION */ |
| case 0x0c8: /* DISPC_VID1_SIZE */ |
| case 0x0cc: /* DISPC_VID1_ATTRIBUTES */ |
| case 0x0d0: /* DISPC_VID1_FIFO_TRESHOLD */ |
| case 0x0d8: /* DISPC_VID1_ROW_INC */ |
| case 0x0dc: /* DISPC_VID1_PIXEL_INC */ |
| case 0x0e0: /* DISPC_VID1_FIR */ |
| case 0x0e4: /* DISPC_VID1_PICTURE_SIZE */ |
| case 0x0e8: /* DISPC_VID1_ACCU0 */ |
| case 0x0ec: /* DISPC_VID1_ACCU1 */ |
| case 0x0f0 ... 0x140: /* DISPC_VID1_FIR_COEF, DISPC_VID1_CONV_COEF */ |
| case 0x14c: /* DISPC_VID2_BA0 */ |
| case 0x150: /* DISPC_VID2_BA1 */ |
| case 0x154: /* DISPC_VID2_POSITION */ |
| case 0x158: /* DISPC_VID2_SIZE */ |
| case 0x15c: /* DISPC_VID2_ATTRIBUTES */ |
| case 0x160: /* DISPC_VID2_FIFO_TRESHOLD */ |
| case 0x168: /* DISPC_VID2_ROW_INC */ |
| case 0x16c: /* DISPC_VID2_PIXEL_INC */ |
| case 0x170: /* DISPC_VID2_FIR */ |
| case 0x174: /* DISPC_VID2_PICTURE_SIZE */ |
| case 0x178: /* DISPC_VID2_ACCU0 */ |
| case 0x17c: /* DISPC_VID2_ACCU1 */ |
| case 0x180 ... 0x1d0: /* DISPC_VID2_FIR_COEF, DISPC_VID2_CONV_COEF */ |
| case 0x1d4: /* DISPC_DATA_CYCLE1 */ |
| case 0x1d8: /* DISPC_DATA_CYCLE2 */ |
| case 0x1dc: /* DISPC_DATA_CYCLE3 */ |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| } |
| } |
| |
| static CPUReadMemoryFunc * const omap_disc1_readfn[] = { |
| omap_badwidth_read32, |
| omap_badwidth_read32, |
| omap_disc_read, |
| }; |
| |
| static CPUWriteMemoryFunc * const omap_disc1_writefn[] = { |
| omap_badwidth_write32, |
| omap_badwidth_write32, |
| omap_disc_write, |
| }; |
| |
| static void omap_rfbi_transfer_stop(struct omap_dss_s *s) |
| { |
| if (!s->rfbi.busy) |
| return; |
| |
| /* TODO: in non-Bypass mode we probably need to just deassert the DRQ. */ |
| |
| s->rfbi.busy = 0; |
| } |
| |
| static void omap_rfbi_transfer_start(struct omap_dss_s *s) |
| { |
| void *data; |
| target_phys_addr_t len; |
| target_phys_addr_t data_addr; |
| int pitch; |
| static void *bounce_buffer; |
| static target_phys_addr_t bounce_len; |
| |
| if (!s->rfbi.enable || s->rfbi.busy) |
| return; |
| |
| if (s->rfbi.control & (1 << 1)) { /* BYPASS */ |
| /* TODO: in non-Bypass mode we probably need to just assert the |
| * DRQ and wait for DMA to write the pixels. */ |
| fprintf(stderr, "%s: Bypass mode unimplemented\n", __FUNCTION__); |
| return; |
| } |
| |
| if (!(s->dispc.control & (1 << 11))) /* RFBIMODE */ |
| return; |
| /* TODO: check that LCD output is enabled in DISPC. */ |
| |
| s->rfbi.busy = 1; |
| |
| len = s->rfbi.pixels * 2; |
| |
| data_addr = s->dispc.l[0].addr[0]; |
| data = cpu_physical_memory_map(data_addr, &len, 0); |
| if (data && len != s->rfbi.pixels * 2) { |
| cpu_physical_memory_unmap(data, len, 0, 0); |
| data = NULL; |
| len = s->rfbi.pixels * 2; |
| } |
| if (!data) { |
| if (len > bounce_len) { |
| bounce_buffer = qemu_realloc(bounce_buffer, len); |
| } |
| data = bounce_buffer; |
| cpu_physical_memory_read(data_addr, data, len); |
| } |
| |
| /* TODO bpp */ |
| s->rfbi.pixels = 0; |
| |
| /* TODO: negative values */ |
| pitch = s->dispc.l[0].nx + (s->dispc.l[0].rowinc - 1) / 2; |
| |
| if ((s->rfbi.control & (1 << 2)) && s->rfbi.chip[0]) |
| s->rfbi.chip[0]->block(s->rfbi.chip[0]->opaque, 1, data, len, pitch); |
| if ((s->rfbi.control & (1 << 3)) && s->rfbi.chip[1]) |
| s->rfbi.chip[1]->block(s->rfbi.chip[1]->opaque, 1, data, len, pitch); |
| |
| if (data != bounce_buffer) { |
| cpu_physical_memory_unmap(data, len, 0, len); |
| } |
| |
| omap_rfbi_transfer_stop(s); |
| |
| /* TODO */ |
| s->dispc.irqst |= 1; /* FRAMEDONE */ |
| omap_dispc_interrupt_update(s); |
| } |
| |
| static uint32_t omap_rfbi_read(void *opaque, target_phys_addr_t addr) |
| { |
| struct omap_dss_s *s = (struct omap_dss_s *) opaque; |
| |
| switch (addr) { |
| case 0x00: /* RFBI_REVISION */ |
| return 0x10; |
| |
| case 0x10: /* RFBI_SYSCONFIG */ |
| return s->rfbi.idlemode; |
| |
| case 0x14: /* RFBI_SYSSTATUS */ |
| return 1 | (s->rfbi.busy << 8); /* RESETDONE */ |
| |
| case 0x40: /* RFBI_CONTROL */ |
| return s->rfbi.control; |
| |
| case 0x44: /* RFBI_PIXELCNT */ |
| return s->rfbi.pixels; |
| |
| case 0x48: /* RFBI_LINE_NUMBER */ |
| return s->rfbi.skiplines; |
| |
| case 0x58: /* RFBI_READ */ |
| case 0x5c: /* RFBI_STATUS */ |
| return s->rfbi.rxbuf; |
| |
| case 0x60: /* RFBI_CONFIG0 */ |
| return s->rfbi.config[0]; |
| case 0x64: /* RFBI_ONOFF_TIME0 */ |
| return s->rfbi.time[0]; |
| case 0x68: /* RFBI_CYCLE_TIME0 */ |
| return s->rfbi.time[1]; |
| case 0x6c: /* RFBI_DATA_CYCLE1_0 */ |
| return s->rfbi.data[0]; |
| case 0x70: /* RFBI_DATA_CYCLE2_0 */ |
| return s->rfbi.data[1]; |
| case 0x74: /* RFBI_DATA_CYCLE3_0 */ |
| return s->rfbi.data[2]; |
| |
| case 0x78: /* RFBI_CONFIG1 */ |
| return s->rfbi.config[1]; |
| case 0x7c: /* RFBI_ONOFF_TIME1 */ |
| return s->rfbi.time[2]; |
| case 0x80: /* RFBI_CYCLE_TIME1 */ |
| return s->rfbi.time[3]; |
| case 0x84: /* RFBI_DATA_CYCLE1_1 */ |
| return s->rfbi.data[3]; |
| case 0x88: /* RFBI_DATA_CYCLE2_1 */ |
| return s->rfbi.data[4]; |
| case 0x8c: /* RFBI_DATA_CYCLE3_1 */ |
| return s->rfbi.data[5]; |
| |
| case 0x90: /* RFBI_VSYNC_WIDTH */ |
| return s->rfbi.vsync; |
| case 0x94: /* RFBI_HSYNC_WIDTH */ |
| return s->rfbi.hsync; |
| } |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_rfbi_write(void *opaque, target_phys_addr_t addr, |
| uint32_t value) |
| { |
| struct omap_dss_s *s = (struct omap_dss_s *) opaque; |
| |
| switch (addr) { |
| case 0x10: /* RFBI_SYSCONFIG */ |
| if (value & 2) /* SOFTRESET */ |
| omap_rfbi_reset(s); |
| s->rfbi.idlemode = value & 0x19; |
| break; |
| |
| case 0x40: /* RFBI_CONTROL */ |
| s->rfbi.control = value & 0xf; |
| s->rfbi.enable = value & 1; |
| if (value & (1 << 4) && /* ITE */ |
| !(s->rfbi.config[0] & s->rfbi.config[1] & 0xc)) |
| omap_rfbi_transfer_start(s); |
| break; |
| |
| case 0x44: /* RFBI_PIXELCNT */ |
| s->rfbi.pixels = value; |
| break; |
| |
| case 0x48: /* RFBI_LINE_NUMBER */ |
| s->rfbi.skiplines = value & 0x7ff; |
| break; |
| |
| case 0x4c: /* RFBI_CMD */ |
| if ((s->rfbi.control & (1 << 2)) && s->rfbi.chip[0]) |
| s->rfbi.chip[0]->write(s->rfbi.chip[0]->opaque, 0, value & 0xffff); |
| if ((s->rfbi.control & (1 << 3)) && s->rfbi.chip[1]) |
| s->rfbi.chip[1]->write(s->rfbi.chip[1]->opaque, 0, value & 0xffff); |
| break; |
| case 0x50: /* RFBI_PARAM */ |
| if ((s->rfbi.control & (1 << 2)) && s->rfbi.chip[0]) |
| s->rfbi.chip[0]->write(s->rfbi.chip[0]->opaque, 1, value & 0xffff); |
| if ((s->rfbi.control & (1 << 3)) && s->rfbi.chip[1]) |
| s->rfbi.chip[1]->write(s->rfbi.chip[1]->opaque, 1, value & 0xffff); |
| break; |
| case 0x54: /* RFBI_DATA */ |
| /* TODO: take into account the format set up in s->rfbi.config[?] and |
| * s->rfbi.data[?], but special-case the most usual scenario so that |
| * speed doesn't suffer. */ |
| if ((s->rfbi.control & (1 << 2)) && s->rfbi.chip[0]) { |
| s->rfbi.chip[0]->write(s->rfbi.chip[0]->opaque, 1, value & 0xffff); |
| s->rfbi.chip[0]->write(s->rfbi.chip[0]->opaque, 1, value >> 16); |
| } |
| if ((s->rfbi.control & (1 << 3)) && s->rfbi.chip[1]) { |
| s->rfbi.chip[1]->write(s->rfbi.chip[1]->opaque, 1, value & 0xffff); |
| s->rfbi.chip[1]->write(s->rfbi.chip[1]->opaque, 1, value >> 16); |
| } |
| if (!-- s->rfbi.pixels) |
| omap_rfbi_transfer_stop(s); |
| break; |
| case 0x58: /* RFBI_READ */ |
| if ((s->rfbi.control & (1 << 2)) && s->rfbi.chip[0]) |
| s->rfbi.rxbuf = s->rfbi.chip[0]->read(s->rfbi.chip[0]->opaque, 1); |
| else if ((s->rfbi.control & (1 << 3)) && s->rfbi.chip[1]) |
| s->rfbi.rxbuf = s->rfbi.chip[0]->read(s->rfbi.chip[0]->opaque, 1); |
| if (!-- s->rfbi.pixels) |
| omap_rfbi_transfer_stop(s); |
| break; |
| |
| case 0x5c: /* RFBI_STATUS */ |
| if ((s->rfbi.control & (1 << 2)) && s->rfbi.chip[0]) |
| s->rfbi.rxbuf = s->rfbi.chip[0]->read(s->rfbi.chip[0]->opaque, 0); |
| else if ((s->rfbi.control & (1 << 3)) && s->rfbi.chip[1]) |
| s->rfbi.rxbuf = s->rfbi.chip[0]->read(s->rfbi.chip[0]->opaque, 0); |
| if (!-- s->rfbi.pixels) |
| omap_rfbi_transfer_stop(s); |
| break; |
| |
| case 0x60: /* RFBI_CONFIG0 */ |
| s->rfbi.config[0] = value & 0x003f1fff; |
| break; |
| |
| case 0x64: /* RFBI_ONOFF_TIME0 */ |
| s->rfbi.time[0] = value & 0x3fffffff; |
| break; |
| case 0x68: /* RFBI_CYCLE_TIME0 */ |
| s->rfbi.time[1] = value & 0x0fffffff; |
| break; |
| case 0x6c: /* RFBI_DATA_CYCLE1_0 */ |
| s->rfbi.data[0] = value & 0x0f1f0f1f; |
| break; |
| case 0x70: /* RFBI_DATA_CYCLE2_0 */ |
| s->rfbi.data[1] = value & 0x0f1f0f1f; |
| break; |
| case 0x74: /* RFBI_DATA_CYCLE3_0 */ |
| s->rfbi.data[2] = value & 0x0f1f0f1f; |
| break; |
| case 0x78: /* RFBI_CONFIG1 */ |
| s->rfbi.config[1] = value & 0x003f1fff; |
| break; |
| |
| case 0x7c: /* RFBI_ONOFF_TIME1 */ |
| s->rfbi.time[2] = value & 0x3fffffff; |
| break; |
| case 0x80: /* RFBI_CYCLE_TIME1 */ |
| s->rfbi.time[3] = value & 0x0fffffff; |
| break; |
| case 0x84: /* RFBI_DATA_CYCLE1_1 */ |
| s->rfbi.data[3] = value & 0x0f1f0f1f; |
| break; |
| case 0x88: /* RFBI_DATA_CYCLE2_1 */ |
| s->rfbi.data[4] = value & 0x0f1f0f1f; |
| break; |
| case 0x8c: /* RFBI_DATA_CYCLE3_1 */ |
| s->rfbi.data[5] = value & 0x0f1f0f1f; |
| break; |
| |
| case 0x90: /* RFBI_VSYNC_WIDTH */ |
| s->rfbi.vsync = value & 0xffff; |
| break; |
| case 0x94: /* RFBI_HSYNC_WIDTH */ |
| s->rfbi.hsync = value & 0xffff; |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| } |
| } |
| |
| static CPUReadMemoryFunc * const omap_rfbi1_readfn[] = { |
| omap_badwidth_read32, |
| omap_badwidth_read32, |
| omap_rfbi_read, |
| }; |
| |
| static CPUWriteMemoryFunc * const omap_rfbi1_writefn[] = { |
| omap_badwidth_write32, |
| omap_badwidth_write32, |
| omap_rfbi_write, |
| }; |
| |
| static uint32_t omap_venc_read(void *opaque, target_phys_addr_t addr) |
| { |
| switch (addr) { |
| case 0x00: /* REV_ID */ |
| case 0x04: /* STATUS */ |
| case 0x08: /* F_CONTROL */ |
| case 0x10: /* VIDOUT_CTRL */ |
| case 0x14: /* SYNC_CTRL */ |
| case 0x1c: /* LLEN */ |
| case 0x20: /* FLENS */ |
| case 0x24: /* HFLTR_CTRL */ |
| case 0x28: /* CC_CARR_WSS_CARR */ |
| case 0x2c: /* C_PHASE */ |
| case 0x30: /* GAIN_U */ |
| case 0x34: /* GAIN_V */ |
| case 0x38: /* GAIN_Y */ |
| case 0x3c: /* BLACK_LEVEL */ |
| case 0x40: /* BLANK_LEVEL */ |
| case 0x44: /* X_COLOR */ |
| case 0x48: /* M_CONTROL */ |
| case 0x4c: /* BSTAMP_WSS_DATA */ |
| case 0x50: /* S_CARR */ |
| case 0x54: /* LINE21 */ |
| case 0x58: /* LN_SEL */ |
| case 0x5c: /* L21__WC_CTL */ |
| case 0x60: /* HTRIGGER_VTRIGGER */ |
| case 0x64: /* SAVID__EAVID */ |
| case 0x68: /* FLEN__FAL */ |
| case 0x6c: /* LAL__PHASE_RESET */ |
| case 0x70: /* HS_INT_START_STOP_X */ |
| case 0x74: /* HS_EXT_START_STOP_X */ |
| case 0x78: /* VS_INT_START_X */ |
| case 0x7c: /* VS_INT_STOP_X__VS_INT_START_Y */ |
| case 0x80: /* VS_INT_STOP_Y__VS_INT_START_X */ |
| case 0x84: /* VS_EXT_STOP_X__VS_EXT_START_Y */ |
| case 0x88: /* VS_EXT_STOP_Y */ |
| case 0x90: /* AVID_START_STOP_X */ |
| case 0x94: /* AVID_START_STOP_Y */ |
| case 0xa0: /* FID_INT_START_X__FID_INT_START_Y */ |
| case 0xa4: /* FID_INT_OFFSET_Y__FID_EXT_START_X */ |
| case 0xa8: /* FID_EXT_START_Y__FID_EXT_OFFSET_Y */ |
| case 0xb0: /* TVDETGP_INT_START_STOP_X */ |
| case 0xb4: /* TVDETGP_INT_START_STOP_Y */ |
| case 0xb8: /* GEN_CTRL */ |
| case 0xc4: /* DAC_TST__DAC_A */ |
| case 0xc8: /* DAC_B__DAC_C */ |
| return 0; |
| |
| default: |
| break; |
| } |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_venc_write(void *opaque, target_phys_addr_t addr, |
| uint32_t value) |
| { |
| switch (addr) { |
| case 0x08: /* F_CONTROL */ |
| case 0x10: /* VIDOUT_CTRL */ |
| case 0x14: /* SYNC_CTRL */ |
| case 0x1c: /* LLEN */ |
| case 0x20: /* FLENS */ |
| case 0x24: /* HFLTR_CTRL */ |
| case 0x28: /* CC_CARR_WSS_CARR */ |
| case 0x2c: /* C_PHASE */ |
| case 0x30: /* GAIN_U */ |
| case 0x34: /* GAIN_V */ |
| case 0x38: /* GAIN_Y */ |
| case 0x3c: /* BLACK_LEVEL */ |
| case 0x40: /* BLANK_LEVEL */ |
| case 0x44: /* X_COLOR */ |
| case 0x48: /* M_CONTROL */ |
| case 0x4c: /* BSTAMP_WSS_DATA */ |
| case 0x50: /* S_CARR */ |
| case 0x54: /* LINE21 */ |
| case 0x58: /* LN_SEL */ |
| case 0x5c: /* L21__WC_CTL */ |
| case 0x60: /* HTRIGGER_VTRIGGER */ |
| case 0x64: /* SAVID__EAVID */ |
| case 0x68: /* FLEN__FAL */ |
| case 0x6c: /* LAL__PHASE_RESET */ |
| case 0x70: /* HS_INT_START_STOP_X */ |
| case 0x74: /* HS_EXT_START_STOP_X */ |
| case 0x78: /* VS_INT_START_X */ |
| case 0x7c: /* VS_INT_STOP_X__VS_INT_START_Y */ |
| case 0x80: /* VS_INT_STOP_Y__VS_INT_START_X */ |
| case 0x84: /* VS_EXT_STOP_X__VS_EXT_START_Y */ |
| case 0x88: /* VS_EXT_STOP_Y */ |
| case 0x90: /* AVID_START_STOP_X */ |
| case 0x94: /* AVID_START_STOP_Y */ |
| case 0xa0: /* FID_INT_START_X__FID_INT_START_Y */ |
| case 0xa4: /* FID_INT_OFFSET_Y__FID_EXT_START_X */ |
| case 0xa8: /* FID_EXT_START_Y__FID_EXT_OFFSET_Y */ |
| case 0xb0: /* TVDETGP_INT_START_STOP_X */ |
| case 0xb4: /* TVDETGP_INT_START_STOP_Y */ |
| case 0xb8: /* GEN_CTRL */ |
| case 0xc4: /* DAC_TST__DAC_A */ |
| case 0xc8: /* DAC_B__DAC_C */ |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| } |
| } |
| |
| static CPUReadMemoryFunc * const omap_venc1_readfn[] = { |
| omap_badwidth_read32, |
| omap_badwidth_read32, |
| omap_venc_read, |
| }; |
| |
| static CPUWriteMemoryFunc * const omap_venc1_writefn[] = { |
| omap_badwidth_write32, |
| omap_badwidth_write32, |
| omap_venc_write, |
| }; |
| |
| static uint32_t omap_im3_read(void *opaque, target_phys_addr_t addr) |
| { |
| switch (addr) { |
| case 0x0a8: /* SBIMERRLOGA */ |
| case 0x0b0: /* SBIMERRLOG */ |
| case 0x190: /* SBIMSTATE */ |
| case 0x198: /* SBTMSTATE_L */ |
| case 0x19c: /* SBTMSTATE_H */ |
| case 0x1a8: /* SBIMCONFIG_L */ |
| case 0x1ac: /* SBIMCONFIG_H */ |
| case 0x1f8: /* SBID_L */ |
| case 0x1fc: /* SBID_H */ |
| return 0; |
| |
| default: |
| break; |
| } |
| OMAP_BAD_REG(addr); |
| return 0; |
| } |
| |
| static void omap_im3_write(void *opaque, target_phys_addr_t addr, |
| uint32_t value) |
| { |
| switch (addr) { |
| case 0x0b0: /* SBIMERRLOG */ |
| case 0x190: /* SBIMSTATE */ |
| case 0x198: /* SBTMSTATE_L */ |
| case 0x19c: /* SBTMSTATE_H */ |
| case 0x1a8: /* SBIMCONFIG_L */ |
| case 0x1ac: /* SBIMCONFIG_H */ |
| break; |
| |
| default: |
| OMAP_BAD_REG(addr); |
| } |
| } |
| |
| static CPUReadMemoryFunc * const omap_im3_readfn[] = { |
| omap_badwidth_read32, |
| omap_badwidth_read32, |
| omap_im3_read, |
| }; |
| |
| static CPUWriteMemoryFunc * const omap_im3_writefn[] = { |
| omap_badwidth_write32, |
| omap_badwidth_write32, |
| omap_im3_write, |
| }; |
| |
| struct omap_dss_s *omap_dss_init(struct omap_target_agent_s *ta, |
| target_phys_addr_t l3_base, |
| qemu_irq irq, qemu_irq drq, |
| omap_clk fck1, omap_clk fck2, omap_clk ck54m, |
| omap_clk ick1, omap_clk ick2) |
| { |
| int iomemtype[5]; |
| struct omap_dss_s *s = (struct omap_dss_s *) |
| qemu_mallocz(sizeof(struct omap_dss_s)); |
| |
| s->irq = irq; |
| s->drq = drq; |
| omap_dss_reset(s); |
| |
| iomemtype[0] = l4_register_io_memory(omap_diss1_readfn, |
| omap_diss1_writefn, s); |
| iomemtype[1] = l4_register_io_memory(omap_disc1_readfn, |
| omap_disc1_writefn, s); |
| iomemtype[2] = l4_register_io_memory(omap_rfbi1_readfn, |
| omap_rfbi1_writefn, s); |
| iomemtype[3] = l4_register_io_memory(omap_venc1_readfn, |
| omap_venc1_writefn, s); |
| iomemtype[4] = cpu_register_io_memory(omap_im3_readfn, |
| omap_im3_writefn, s, DEVICE_NATIVE_ENDIAN); |
| omap_l4_attach(ta, 0, iomemtype[0]); |
| omap_l4_attach(ta, 1, iomemtype[1]); |
| omap_l4_attach(ta, 2, iomemtype[2]); |
| omap_l4_attach(ta, 3, iomemtype[3]); |
| cpu_register_physical_memory(l3_base, 0x1000, iomemtype[4]); |
| |
| #if 0 |
| s->state = graphic_console_init(omap_update_display, |
| omap_invalidate_display, omap_screen_dump, s); |
| #endif |
| |
| return s; |
| } |
| |
| void omap_rfbi_attach(struct omap_dss_s *s, int cs, struct rfbi_chip_s *chip) |
| { |
| if (cs < 0 || cs > 1) |
| hw_error("%s: wrong CS %i\n", __FUNCTION__, cs); |
| s->rfbi.chip[cs] = chip; |
| } |