| /* |
| * QEMU model of the Milkymist System Controller. |
| * |
| * Copyright (c) 2010-2012 Michael Walle <michael@walle.cc> |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| * |
| * |
| * Specification available at: |
| * http://www.milkymist.org/socdoc/sysctl.pdf |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/hw.h" |
| #include "hw/sysbus.h" |
| #include "sysemu/sysemu.h" |
| #include "trace.h" |
| #include "qemu/timer.h" |
| #include "hw/ptimer.h" |
| #include "qemu/error-report.h" |
| |
| enum { |
| CTRL_ENABLE = (1<<0), |
| CTRL_AUTORESTART = (1<<1), |
| }; |
| |
| enum { |
| ICAP_READY = (1<<0), |
| }; |
| |
| enum { |
| R_GPIO_IN = 0, |
| R_GPIO_OUT, |
| R_GPIO_INTEN, |
| R_TIMER0_CONTROL = 4, |
| R_TIMER0_COMPARE, |
| R_TIMER0_COUNTER, |
| R_TIMER1_CONTROL = 8, |
| R_TIMER1_COMPARE, |
| R_TIMER1_COUNTER, |
| R_ICAP = 16, |
| R_DBG_SCRATCHPAD = 20, |
| R_DBG_WRITE_LOCK, |
| R_CLK_FREQUENCY = 29, |
| R_CAPABILITIES, |
| R_SYSTEM_ID, |
| R_MAX |
| }; |
| |
| #define TYPE_MILKYMIST_SYSCTL "milkymist-sysctl" |
| #define MILKYMIST_SYSCTL(obj) \ |
| OBJECT_CHECK(MilkymistSysctlState, (obj), TYPE_MILKYMIST_SYSCTL) |
| |
| struct MilkymistSysctlState { |
| SysBusDevice parent_obj; |
| |
| MemoryRegion regs_region; |
| |
| QEMUBH *bh0; |
| QEMUBH *bh1; |
| ptimer_state *ptimer0; |
| ptimer_state *ptimer1; |
| |
| uint32_t freq_hz; |
| uint32_t capabilities; |
| uint32_t systemid; |
| uint32_t strappings; |
| |
| uint32_t regs[R_MAX]; |
| |
| qemu_irq gpio_irq; |
| qemu_irq timer0_irq; |
| qemu_irq timer1_irq; |
| }; |
| typedef struct MilkymistSysctlState MilkymistSysctlState; |
| |
| static void sysctl_icap_write(MilkymistSysctlState *s, uint32_t value) |
| { |
| trace_milkymist_sysctl_icap_write(value); |
| switch (value & 0xffff) { |
| case 0x000e: |
| qemu_system_shutdown_request(); |
| break; |
| } |
| } |
| |
| static uint64_t sysctl_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| MilkymistSysctlState *s = opaque; |
| uint32_t r = 0; |
| |
| addr >>= 2; |
| switch (addr) { |
| case R_TIMER0_COUNTER: |
| r = (uint32_t)ptimer_get_count(s->ptimer0); |
| /* milkymist timer counts up */ |
| r = s->regs[R_TIMER0_COMPARE] - r; |
| break; |
| case R_TIMER1_COUNTER: |
| r = (uint32_t)ptimer_get_count(s->ptimer1); |
| /* milkymist timer counts up */ |
| r = s->regs[R_TIMER1_COMPARE] - r; |
| break; |
| case R_GPIO_IN: |
| case R_GPIO_OUT: |
| case R_GPIO_INTEN: |
| case R_TIMER0_CONTROL: |
| case R_TIMER0_COMPARE: |
| case R_TIMER1_CONTROL: |
| case R_TIMER1_COMPARE: |
| case R_ICAP: |
| case R_DBG_SCRATCHPAD: |
| case R_DBG_WRITE_LOCK: |
| case R_CLK_FREQUENCY: |
| case R_CAPABILITIES: |
| case R_SYSTEM_ID: |
| r = s->regs[addr]; |
| break; |
| |
| default: |
| error_report("milkymist_sysctl: read access to unknown register 0x" |
| TARGET_FMT_plx, addr << 2); |
| break; |
| } |
| |
| trace_milkymist_sysctl_memory_read(addr << 2, r); |
| |
| return r; |
| } |
| |
| static void sysctl_write(void *opaque, hwaddr addr, uint64_t value, |
| unsigned size) |
| { |
| MilkymistSysctlState *s = opaque; |
| |
| trace_milkymist_sysctl_memory_write(addr, value); |
| |
| addr >>= 2; |
| switch (addr) { |
| case R_GPIO_OUT: |
| case R_GPIO_INTEN: |
| case R_TIMER0_COUNTER: |
| case R_TIMER1_COUNTER: |
| case R_DBG_SCRATCHPAD: |
| s->regs[addr] = value; |
| break; |
| case R_TIMER0_COMPARE: |
| ptimer_set_limit(s->ptimer0, value, 0); |
| s->regs[addr] = value; |
| break; |
| case R_TIMER1_COMPARE: |
| ptimer_set_limit(s->ptimer1, value, 0); |
| s->regs[addr] = value; |
| break; |
| case R_TIMER0_CONTROL: |
| s->regs[addr] = value; |
| if (s->regs[R_TIMER0_CONTROL] & CTRL_ENABLE) { |
| trace_milkymist_sysctl_start_timer0(); |
| ptimer_set_count(s->ptimer0, |
| s->regs[R_TIMER0_COMPARE] - s->regs[R_TIMER0_COUNTER]); |
| ptimer_run(s->ptimer0, 0); |
| } else { |
| trace_milkymist_sysctl_stop_timer0(); |
| ptimer_stop(s->ptimer0); |
| } |
| break; |
| case R_TIMER1_CONTROL: |
| s->regs[addr] = value; |
| if (s->regs[R_TIMER1_CONTROL] & CTRL_ENABLE) { |
| trace_milkymist_sysctl_start_timer1(); |
| ptimer_set_count(s->ptimer1, |
| s->regs[R_TIMER1_COMPARE] - s->regs[R_TIMER1_COUNTER]); |
| ptimer_run(s->ptimer1, 0); |
| } else { |
| trace_milkymist_sysctl_stop_timer1(); |
| ptimer_stop(s->ptimer1); |
| } |
| break; |
| case R_ICAP: |
| sysctl_icap_write(s, value); |
| break; |
| case R_DBG_WRITE_LOCK: |
| s->regs[addr] = 1; |
| break; |
| case R_SYSTEM_ID: |
| qemu_system_reset_request(); |
| break; |
| |
| case R_GPIO_IN: |
| case R_CLK_FREQUENCY: |
| case R_CAPABILITIES: |
| error_report("milkymist_sysctl: write to read-only register 0x" |
| TARGET_FMT_plx, addr << 2); |
| break; |
| |
| default: |
| error_report("milkymist_sysctl: write access to unknown register 0x" |
| TARGET_FMT_plx, addr << 2); |
| break; |
| } |
| } |
| |
| static const MemoryRegionOps sysctl_mmio_ops = { |
| .read = sysctl_read, |
| .write = sysctl_write, |
| .valid = { |
| .min_access_size = 4, |
| .max_access_size = 4, |
| }, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void timer0_hit(void *opaque) |
| { |
| MilkymistSysctlState *s = opaque; |
| |
| if (!(s->regs[R_TIMER0_CONTROL] & CTRL_AUTORESTART)) { |
| s->regs[R_TIMER0_CONTROL] &= ~CTRL_ENABLE; |
| trace_milkymist_sysctl_stop_timer0(); |
| ptimer_stop(s->ptimer0); |
| } |
| |
| trace_milkymist_sysctl_pulse_irq_timer0(); |
| qemu_irq_pulse(s->timer0_irq); |
| } |
| |
| static void timer1_hit(void *opaque) |
| { |
| MilkymistSysctlState *s = opaque; |
| |
| if (!(s->regs[R_TIMER1_CONTROL] & CTRL_AUTORESTART)) { |
| s->regs[R_TIMER1_CONTROL] &= ~CTRL_ENABLE; |
| trace_milkymist_sysctl_stop_timer1(); |
| ptimer_stop(s->ptimer1); |
| } |
| |
| trace_milkymist_sysctl_pulse_irq_timer1(); |
| qemu_irq_pulse(s->timer1_irq); |
| } |
| |
| static void milkymist_sysctl_reset(DeviceState *d) |
| { |
| MilkymistSysctlState *s = MILKYMIST_SYSCTL(d); |
| int i; |
| |
| for (i = 0; i < R_MAX; i++) { |
| s->regs[i] = 0; |
| } |
| |
| ptimer_stop(s->ptimer0); |
| ptimer_stop(s->ptimer1); |
| |
| /* defaults */ |
| s->regs[R_ICAP] = ICAP_READY; |
| s->regs[R_SYSTEM_ID] = s->systemid; |
| s->regs[R_CLK_FREQUENCY] = s->freq_hz; |
| s->regs[R_CAPABILITIES] = s->capabilities; |
| s->regs[R_GPIO_IN] = s->strappings; |
| } |
| |
| static int milkymist_sysctl_init(SysBusDevice *dev) |
| { |
| MilkymistSysctlState *s = MILKYMIST_SYSCTL(dev); |
| |
| sysbus_init_irq(dev, &s->gpio_irq); |
| sysbus_init_irq(dev, &s->timer0_irq); |
| sysbus_init_irq(dev, &s->timer1_irq); |
| |
| s->bh0 = qemu_bh_new(timer0_hit, s); |
| s->bh1 = qemu_bh_new(timer1_hit, s); |
| s->ptimer0 = ptimer_init(s->bh0); |
| s->ptimer1 = ptimer_init(s->bh1); |
| ptimer_set_freq(s->ptimer0, s->freq_hz); |
| ptimer_set_freq(s->ptimer1, s->freq_hz); |
| |
| memory_region_init_io(&s->regs_region, OBJECT(s), &sysctl_mmio_ops, s, |
| "milkymist-sysctl", R_MAX * 4); |
| sysbus_init_mmio(dev, &s->regs_region); |
| |
| return 0; |
| } |
| |
| static const VMStateDescription vmstate_milkymist_sysctl = { |
| .name = "milkymist-sysctl", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32_ARRAY(regs, MilkymistSysctlState, R_MAX), |
| VMSTATE_PTIMER(ptimer0, MilkymistSysctlState), |
| VMSTATE_PTIMER(ptimer1, MilkymistSysctlState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static Property milkymist_sysctl_properties[] = { |
| DEFINE_PROP_UINT32("frequency", MilkymistSysctlState, |
| freq_hz, 80000000), |
| DEFINE_PROP_UINT32("capabilities", MilkymistSysctlState, |
| capabilities, 0x00000000), |
| DEFINE_PROP_UINT32("systemid", MilkymistSysctlState, |
| systemid, 0x10014d31), |
| DEFINE_PROP_UINT32("gpio_strappings", MilkymistSysctlState, |
| strappings, 0x00000001), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void milkymist_sysctl_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); |
| |
| k->init = milkymist_sysctl_init; |
| dc->reset = milkymist_sysctl_reset; |
| dc->vmsd = &vmstate_milkymist_sysctl; |
| dc->props = milkymist_sysctl_properties; |
| } |
| |
| static const TypeInfo milkymist_sysctl_info = { |
| .name = TYPE_MILKYMIST_SYSCTL, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(MilkymistSysctlState), |
| .class_init = milkymist_sysctl_class_init, |
| }; |
| |
| static void milkymist_sysctl_register_types(void) |
| { |
| type_register_static(&milkymist_sysctl_info); |
| } |
| |
| type_init(milkymist_sysctl_register_types) |