| /* |
| * STM32L4X5 USART (Universal Synchronous Asynchronous Receiver Transmitter) |
| * |
| * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr> |
| * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr> |
| * |
| * SPDX-License-Identifier: GPL-2.0-or-later |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| * |
| * The STM32L4X5 USART is heavily inspired by the stm32f2xx_usart |
| * by Alistair Francis. |
| * The reference used is the STMicroElectronics RM0351 Reference manual |
| * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/log.h" |
| #include "qemu/module.h" |
| #include "qapi/error.h" |
| #include "chardev/char-fe.h" |
| #include "chardev/char-serial.h" |
| #include "migration/vmstate.h" |
| #include "hw/char/stm32l4x5_usart.h" |
| #include "hw/clock.h" |
| #include "hw/irq.h" |
| #include "hw/qdev-clock.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/qdev-properties-system.h" |
| #include "hw/registerfields.h" |
| #include "trace.h" |
| |
| |
| REG32(CR1, 0x00) |
| FIELD(CR1, M1, 28, 1) /* Word length (part 2, see M0) */ |
| FIELD(CR1, EOBIE, 27, 1) /* End of Block interrupt enable */ |
| FIELD(CR1, RTOIE, 26, 1) /* Receiver timeout interrupt enable */ |
| FIELD(CR1, DEAT, 21, 5) /* Driver Enable assertion time */ |
| FIELD(CR1, DEDT, 16, 5) /* Driver Enable de-assertion time */ |
| FIELD(CR1, OVER8, 15, 1) /* Oversampling mode */ |
| FIELD(CR1, CMIE, 14, 1) /* Character match interrupt enable */ |
| FIELD(CR1, MME, 13, 1) /* Mute mode enable */ |
| FIELD(CR1, M0, 12, 1) /* Word length (part 1, see M1) */ |
| FIELD(CR1, WAKE, 11, 1) /* Receiver wakeup method */ |
| FIELD(CR1, PCE, 10, 1) /* Parity control enable */ |
| FIELD(CR1, PS, 9, 1) /* Parity selection */ |
| FIELD(CR1, PEIE, 8, 1) /* PE interrupt enable */ |
| FIELD(CR1, TXEIE, 7, 1) /* TXE interrupt enable */ |
| FIELD(CR1, TCIE, 6, 1) /* Transmission complete interrupt enable */ |
| FIELD(CR1, RXNEIE, 5, 1) /* RXNE interrupt enable */ |
| FIELD(CR1, IDLEIE, 4, 1) /* IDLE interrupt enable */ |
| FIELD(CR1, TE, 3, 1) /* Transmitter enable */ |
| FIELD(CR1, RE, 2, 1) /* Receiver enable */ |
| FIELD(CR1, UESM, 1, 1) /* USART enable in Stop mode */ |
| FIELD(CR1, UE, 0, 1) /* USART enable */ |
| REG32(CR2, 0x04) |
| FIELD(CR2, ADD_1, 28, 4) /* ADD[7:4] */ |
| FIELD(CR2, ADD_0, 24, 1) /* ADD[3:0] */ |
| FIELD(CR2, RTOEN, 23, 1) /* Receiver timeout enable */ |
| FIELD(CR2, ABRMOD, 21, 2) /* Auto baud rate mode */ |
| FIELD(CR2, ABREN, 20, 1) /* Auto baud rate enable */ |
| FIELD(CR2, MSBFIRST, 19, 1) /* Most significant bit first */ |
| FIELD(CR2, DATAINV, 18, 1) /* Binary data inversion */ |
| FIELD(CR2, TXINV, 17, 1) /* TX pin active level inversion */ |
| FIELD(CR2, RXINV, 16, 1) /* RX pin active level inversion */ |
| FIELD(CR2, SWAP, 15, 1) /* Swap RX/TX pins */ |
| FIELD(CR2, LINEN, 14, 1) /* LIN mode enable */ |
| FIELD(CR2, STOP, 12, 2) /* STOP bits */ |
| FIELD(CR2, CLKEN, 11, 1) /* Clock enable */ |
| FIELD(CR2, CPOL, 10, 1) /* Clock polarity */ |
| FIELD(CR2, CPHA, 9, 1) /* Clock phase */ |
| FIELD(CR2, LBCL, 8, 1) /* Last bit clock pulse */ |
| FIELD(CR2, LBDIE, 6, 1) /* LIN break detection interrupt enable */ |
| FIELD(CR2, LBDL, 5, 1) /* LIN break detection length */ |
| FIELD(CR2, ADDM7, 4, 1) /* 7-bit / 4-bit Address Detection */ |
| |
| REG32(CR3, 0x08) |
| /* TCBGTIE only on STM32L496xx/4A6xx devices */ |
| FIELD(CR3, UCESM, 23, 1) /* USART Clock Enable in Stop Mode */ |
| FIELD(CR3, WUFIE, 22, 1) /* Wakeup from Stop mode interrupt enable */ |
| FIELD(CR3, WUS, 20, 2) /* Wakeup from Stop mode interrupt flag selection */ |
| FIELD(CR3, SCARCNT, 17, 3) /* Smartcard auto-retry count */ |
| FIELD(CR3, DEP, 15, 1) /* Driver enable polarity selection */ |
| FIELD(CR3, DEM, 14, 1) /* Driver enable mode */ |
| FIELD(CR3, DDRE, 13, 1) /* DMA Disable on Reception Error */ |
| FIELD(CR3, OVRDIS, 12, 1) /* Overrun Disable */ |
| FIELD(CR3, ONEBIT, 11, 1) /* One sample bit method enable */ |
| FIELD(CR3, CTSIE, 10, 1) /* CTS interrupt enable */ |
| FIELD(CR3, CTSE, 9, 1) /* CTS enable */ |
| FIELD(CR3, RTSE, 8, 1) /* RTS enable */ |
| FIELD(CR3, DMAT, 7, 1) /* DMA enable transmitter */ |
| FIELD(CR3, DMAR, 6, 1) /* DMA enable receiver */ |
| FIELD(CR3, SCEN, 5, 1) /* Smartcard mode enable */ |
| FIELD(CR3, NACK, 4, 1) /* Smartcard NACK enable */ |
| FIELD(CR3, HDSEL, 3, 1) /* Half-duplex selection */ |
| FIELD(CR3, IRLP, 2, 1) /* IrDA low-power */ |
| FIELD(CR3, IREN, 1, 1) /* IrDA mode enable */ |
| FIELD(CR3, EIE, 0, 1) /* Error interrupt enable */ |
| REG32(BRR, 0x0C) |
| FIELD(BRR, BRR, 0, 16) |
| REG32(GTPR, 0x10) |
| FIELD(GTPR, GT, 8, 8) /* Guard time value */ |
| FIELD(GTPR, PSC, 0, 8) /* Prescaler value */ |
| REG32(RTOR, 0x14) |
| FIELD(RTOR, BLEN, 24, 8) /* Block Length */ |
| FIELD(RTOR, RTO, 0, 24) /* Receiver timeout value */ |
| REG32(RQR, 0x18) |
| FIELD(RQR, TXFRQ, 4, 1) /* Transmit data flush request */ |
| FIELD(RQR, RXFRQ, 3, 1) /* Receive data flush request */ |
| FIELD(RQR, MMRQ, 2, 1) /* Mute mode request */ |
| FIELD(RQR, SBKRQ, 1, 1) /* Send break request */ |
| FIELD(RQR, ABBRRQ, 0, 1) /* Auto baud rate request */ |
| REG32(ISR, 0x1C) |
| /* TCBGT only for STM32L475xx/476xx/486xx devices */ |
| FIELD(ISR, REACK, 22, 1) /* Receive enable acknowledge flag */ |
| FIELD(ISR, TEACK, 21, 1) /* Transmit enable acknowledge flag */ |
| FIELD(ISR, WUF, 20, 1) /* Wakeup from Stop mode flag */ |
| FIELD(ISR, RWU, 19, 1) /* Receiver wakeup from Mute mode */ |
| FIELD(ISR, SBKF, 18, 1) /* Send break flag */ |
| FIELD(ISR, CMF, 17, 1) /* Character match flag */ |
| FIELD(ISR, BUSY, 16, 1) /* Busy flag */ |
| FIELD(ISR, ABRF, 15, 1) /* Auto Baud rate flag */ |
| FIELD(ISR, ABRE, 14, 1) /* Auto Baud rate error */ |
| FIELD(ISR, EOBF, 12, 1) /* End of block flag */ |
| FIELD(ISR, RTOF, 11, 1) /* Receiver timeout */ |
| FIELD(ISR, CTS, 10, 1) /* CTS flag */ |
| FIELD(ISR, CTSIF, 9, 1) /* CTS interrupt flag */ |
| FIELD(ISR, LBDF, 8, 1) /* LIN break detection flag */ |
| FIELD(ISR, TXE, 7, 1) /* Transmit data register empty */ |
| FIELD(ISR, TC, 6, 1) /* Transmission complete */ |
| FIELD(ISR, RXNE, 5, 1) /* Read data register not empty */ |
| FIELD(ISR, IDLE, 4, 1) /* Idle line detected */ |
| FIELD(ISR, ORE, 3, 1) /* Overrun error */ |
| FIELD(ISR, NF, 2, 1) /* START bit Noise detection flag */ |
| FIELD(ISR, FE, 1, 1) /* Framing Error */ |
| FIELD(ISR, PE, 0, 1) /* Parity Error */ |
| REG32(ICR, 0x20) |
| FIELD(ICR, WUCF, 20, 1) /* Wakeup from Stop mode clear flag */ |
| FIELD(ICR, CMCF, 17, 1) /* Character match clear flag */ |
| FIELD(ICR, EOBCF, 12, 1) /* End of block clear flag */ |
| FIELD(ICR, RTOCF, 11, 1) /* Receiver timeout clear flag */ |
| FIELD(ICR, CTSCF, 9, 1) /* CTS clear flag */ |
| FIELD(ICR, LBDCF, 8, 1) /* LIN break detection clear flag */ |
| /* TCBGTCF only on STM32L496xx/4A6xx devices */ |
| FIELD(ICR, TCCF, 6, 1) /* Transmission complete clear flag */ |
| FIELD(ICR, IDLECF, 4, 1) /* Idle line detected clear flag */ |
| FIELD(ICR, ORECF, 3, 1) /* Overrun error clear flag */ |
| FIELD(ICR, NCF, 2, 1) /* Noise detected clear flag */ |
| FIELD(ICR, FECF, 1, 1) /* Framing error clear flag */ |
| FIELD(ICR, PECF, 0, 1) /* Parity error clear flag */ |
| REG32(RDR, 0x24) |
| FIELD(RDR, RDR, 0, 9) |
| REG32(TDR, 0x28) |
| FIELD(TDR, TDR, 0, 9) |
| |
| static void stm32l4x5_update_irq(Stm32l4x5UsartBaseState *s) |
| { |
| if (((s->isr & R_ISR_WUF_MASK) && (s->cr3 & R_CR3_WUFIE_MASK)) || |
| ((s->isr & R_ISR_CMF_MASK) && (s->cr1 & R_CR1_CMIE_MASK)) || |
| ((s->isr & R_ISR_ABRF_MASK) && (s->cr1 & R_CR1_RXNEIE_MASK)) || |
| ((s->isr & R_ISR_EOBF_MASK) && (s->cr1 & R_CR1_EOBIE_MASK)) || |
| ((s->isr & R_ISR_RTOF_MASK) && (s->cr1 & R_CR1_RTOIE_MASK)) || |
| ((s->isr & R_ISR_CTSIF_MASK) && (s->cr3 & R_CR3_CTSIE_MASK)) || |
| ((s->isr & R_ISR_LBDF_MASK) && (s->cr2 & R_CR2_LBDIE_MASK)) || |
| ((s->isr & R_ISR_TXE_MASK) && (s->cr1 & R_CR1_TXEIE_MASK)) || |
| ((s->isr & R_ISR_TC_MASK) && (s->cr1 & R_CR1_TCIE_MASK)) || |
| ((s->isr & R_ISR_RXNE_MASK) && (s->cr1 & R_CR1_RXNEIE_MASK)) || |
| ((s->isr & R_ISR_IDLE_MASK) && (s->cr1 & R_CR1_IDLEIE_MASK)) || |
| ((s->isr & R_ISR_ORE_MASK) && |
| ((s->cr1 & R_CR1_RXNEIE_MASK) || (s->cr3 & R_CR3_EIE_MASK))) || |
| /* TODO: Handle NF ? */ |
| ((s->isr & R_ISR_FE_MASK) && (s->cr3 & R_CR3_EIE_MASK)) || |
| ((s->isr & R_ISR_PE_MASK) && (s->cr1 & R_CR1_PEIE_MASK))) { |
| qemu_irq_raise(s->irq); |
| trace_stm32l4x5_usart_irq_raised(s->isr); |
| } else { |
| qemu_irq_lower(s->irq); |
| trace_stm32l4x5_usart_irq_lowered(); |
| } |
| } |
| |
| static int stm32l4x5_usart_base_can_receive(void *opaque) |
| { |
| Stm32l4x5UsartBaseState *s = opaque; |
| |
| if (!(s->isr & R_ISR_RXNE_MASK)) { |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static void stm32l4x5_usart_base_receive(void *opaque, const uint8_t *buf, |
| int size) |
| { |
| Stm32l4x5UsartBaseState *s = opaque; |
| |
| if (!((s->cr1 & R_CR1_UE_MASK) && (s->cr1 & R_CR1_RE_MASK))) { |
| trace_stm32l4x5_usart_receiver_not_enabled( |
| FIELD_EX32(s->cr1, CR1, UE), FIELD_EX32(s->cr1, CR1, RE)); |
| return; |
| } |
| |
| /* Check if overrun detection is enabled and if there is an overrun */ |
| if (!(s->cr3 & R_CR3_OVRDIS_MASK) && (s->isr & R_ISR_RXNE_MASK)) { |
| /* |
| * A character has been received while |
| * the previous has not been read = Overrun. |
| */ |
| s->isr |= R_ISR_ORE_MASK; |
| trace_stm32l4x5_usart_overrun_detected(s->rdr, *buf); |
| } else { |
| /* No overrun */ |
| s->rdr = *buf; |
| s->isr |= R_ISR_RXNE_MASK; |
| trace_stm32l4x5_usart_rx(s->rdr); |
| } |
| |
| stm32l4x5_update_irq(s); |
| } |
| |
| /* |
| * Try to send tx data, and arrange to be called back later if |
| * we can't (ie the char backend is busy/blocking). |
| */ |
| static gboolean usart_transmit(void *do_not_use, GIOCondition cond, |
| void *opaque) |
| { |
| Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(opaque); |
| int ret; |
| /* TODO: Handle 9 bits transmission */ |
| uint8_t ch = s->tdr; |
| |
| s->watch_tag = 0; |
| |
| if (!(s->cr1 & R_CR1_TE_MASK) || (s->isr & R_ISR_TXE_MASK)) { |
| return G_SOURCE_REMOVE; |
| } |
| |
| ret = qemu_chr_fe_write(&s->chr, &ch, 1); |
| if (ret <= 0) { |
| s->watch_tag = qemu_chr_fe_add_watch(&s->chr, G_IO_OUT | G_IO_HUP, |
| usart_transmit, s); |
| if (!s->watch_tag) { |
| /* |
| * Most common reason to be here is "no chardev backend": |
| * just insta-drain the buffer, so the serial output |
| * goes into a void, rather than blocking the guest. |
| */ |
| goto buffer_drained; |
| } |
| /* Transmit pending */ |
| trace_stm32l4x5_usart_tx_pending(); |
| return G_SOURCE_REMOVE; |
| } |
| |
| buffer_drained: |
| /* Character successfully sent */ |
| trace_stm32l4x5_usart_tx(ch); |
| s->isr |= R_ISR_TC_MASK | R_ISR_TXE_MASK; |
| stm32l4x5_update_irq(s); |
| return G_SOURCE_REMOVE; |
| } |
| |
| static void usart_cancel_transmit(Stm32l4x5UsartBaseState *s) |
| { |
| if (s->watch_tag) { |
| g_source_remove(s->watch_tag); |
| s->watch_tag = 0; |
| } |
| } |
| |
| static void stm32l4x5_update_params(Stm32l4x5UsartBaseState *s) |
| { |
| int speed, parity, data_bits, stop_bits; |
| uint32_t value, usart_div; |
| QEMUSerialSetParams ssp; |
| |
| /* Select the parity type */ |
| if (s->cr1 & R_CR1_PCE_MASK) { |
| if (s->cr1 & R_CR1_PS_MASK) { |
| parity = 'O'; |
| } else { |
| parity = 'E'; |
| } |
| } else { |
| parity = 'N'; |
| } |
| |
| /* Select the number of stop bits */ |
| switch (FIELD_EX32(s->cr2, CR2, STOP)) { |
| case 0: |
| stop_bits = 1; |
| break; |
| case 2: |
| stop_bits = 2; |
| break; |
| default: |
| qemu_log_mask(LOG_UNIMP, |
| "UNIMPLEMENTED: fractionnal stop bits; CR2[13:12] = %u", |
| FIELD_EX32(s->cr2, CR2, STOP)); |
| return; |
| } |
| |
| /* Select the length of the word */ |
| switch ((FIELD_EX32(s->cr1, CR1, M1) << 1) | FIELD_EX32(s->cr1, CR1, M0)) { |
| case 0: |
| data_bits = 8; |
| break; |
| case 1: |
| data_bits = 9; |
| break; |
| case 2: |
| data_bits = 7; |
| break; |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "UNDEFINED: invalid word length, CR1.M = 0b11"); |
| return; |
| } |
| |
| /* Select the baud rate */ |
| value = FIELD_EX32(s->brr, BRR, BRR); |
| if (value < 16) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "UNDEFINED: BRR less than 16: %u", value); |
| return; |
| } |
| |
| if (FIELD_EX32(s->cr1, CR1, OVER8) == 0) { |
| /* |
| * Oversampling by 16 |
| * BRR = USARTDIV |
| */ |
| usart_div = value; |
| } else { |
| /* |
| * Oversampling by 8 |
| * - BRR[2:0] = USARTDIV[3:0] shifted 1 bit to the right. |
| * - BRR[3] must be kept cleared. |
| * - BRR[15:4] = USARTDIV[15:4] |
| * - The frequency is multiplied by 2 |
| */ |
| usart_div = ((value & 0xFFF0) | ((value & 0x0007) << 1)) / 2; |
| } |
| |
| speed = clock_get_hz(s->clk) / usart_div; |
| |
| ssp.speed = speed; |
| ssp.parity = parity; |
| ssp.data_bits = data_bits; |
| ssp.stop_bits = stop_bits; |
| |
| qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp); |
| |
| trace_stm32l4x5_usart_update_params(speed, parity, data_bits, stop_bits); |
| } |
| |
| static void stm32l4x5_usart_base_reset_hold(Object *obj, ResetType type) |
| { |
| Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(obj); |
| |
| s->cr1 = 0x00000000; |
| s->cr2 = 0x00000000; |
| s->cr3 = 0x00000000; |
| s->brr = 0x00000000; |
| s->gtpr = 0x00000000; |
| s->rtor = 0x00000000; |
| s->isr = 0x020000C0; |
| s->rdr = 0x00000000; |
| s->tdr = 0x00000000; |
| |
| usart_cancel_transmit(s); |
| stm32l4x5_update_irq(s); |
| } |
| |
| static void usart_update_rqr(Stm32l4x5UsartBaseState *s, uint32_t value) |
| { |
| /* TXFRQ */ |
| /* Reset RXNE flag */ |
| if (value & R_RQR_RXFRQ_MASK) { |
| s->isr &= ~R_ISR_RXNE_MASK; |
| } |
| /* MMRQ */ |
| /* SBKRQ */ |
| /* ABRRQ */ |
| stm32l4x5_update_irq(s); |
| } |
| |
| static uint64_t stm32l4x5_usart_base_read(void *opaque, hwaddr addr, |
| unsigned int size) |
| { |
| Stm32l4x5UsartBaseState *s = opaque; |
| uint64_t retvalue = 0; |
| |
| switch (addr) { |
| case A_CR1: |
| retvalue = s->cr1; |
| break; |
| case A_CR2: |
| retvalue = s->cr2; |
| break; |
| case A_CR3: |
| retvalue = s->cr3; |
| break; |
| case A_BRR: |
| retvalue = FIELD_EX32(s->brr, BRR, BRR); |
| break; |
| case A_GTPR: |
| retvalue = s->gtpr; |
| break; |
| case A_RTOR: |
| retvalue = s->rtor; |
| break; |
| case A_RQR: |
| /* RQR is a write only register */ |
| retvalue = 0x00000000; |
| break; |
| case A_ISR: |
| retvalue = s->isr; |
| break; |
| case A_ICR: |
| /* ICR is a clear register */ |
| retvalue = 0x00000000; |
| break; |
| case A_RDR: |
| retvalue = FIELD_EX32(s->rdr, RDR, RDR); |
| /* Reset RXNE flag */ |
| s->isr &= ~R_ISR_RXNE_MASK; |
| stm32l4x5_update_irq(s); |
| break; |
| case A_TDR: |
| retvalue = FIELD_EX32(s->tdr, TDR, TDR); |
| break; |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr); |
| break; |
| } |
| |
| trace_stm32l4x5_usart_read(addr, retvalue); |
| |
| return retvalue; |
| } |
| |
| static void stm32l4x5_usart_base_write(void *opaque, hwaddr addr, |
| uint64_t val64, unsigned int size) |
| { |
| Stm32l4x5UsartBaseState *s = opaque; |
| const uint32_t value = val64; |
| |
| trace_stm32l4x5_usart_write(addr, value); |
| |
| switch (addr) { |
| case A_CR1: |
| s->cr1 = value; |
| stm32l4x5_update_params(s); |
| stm32l4x5_update_irq(s); |
| return; |
| case A_CR2: |
| s->cr2 = value; |
| stm32l4x5_update_params(s); |
| return; |
| case A_CR3: |
| s->cr3 = value; |
| return; |
| case A_BRR: |
| s->brr = value; |
| stm32l4x5_update_params(s); |
| return; |
| case A_GTPR: |
| s->gtpr = value; |
| return; |
| case A_RTOR: |
| s->rtor = value; |
| return; |
| case A_RQR: |
| usart_update_rqr(s, value); |
| return; |
| case A_ISR: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: ISR is read only !\n", __func__); |
| return; |
| case A_ICR: |
| /* Clear the status flags */ |
| s->isr &= ~value; |
| stm32l4x5_update_irq(s); |
| return; |
| case A_RDR: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: RDR is read only !\n", __func__); |
| return; |
| case A_TDR: |
| s->tdr = value; |
| s->isr &= ~R_ISR_TXE_MASK; |
| usart_transmit(NULL, G_IO_OUT, s); |
| return; |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "%s: Bad offset 0x%"HWADDR_PRIx"\n", __func__, addr); |
| } |
| } |
| |
| static const MemoryRegionOps stm32l4x5_usart_base_ops = { |
| .read = stm32l4x5_usart_base_read, |
| .write = stm32l4x5_usart_base_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .valid = { |
| .max_access_size = 4, |
| .min_access_size = 4, |
| .unaligned = false |
| }, |
| .impl = { |
| .max_access_size = 4, |
| .min_access_size = 4, |
| .unaligned = false |
| }, |
| }; |
| |
| static Property stm32l4x5_usart_base_properties[] = { |
| DEFINE_PROP_CHR("chardev", Stm32l4x5UsartBaseState, chr), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void stm32l4x5_usart_base_init(Object *obj) |
| { |
| Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(obj); |
| |
| sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq); |
| |
| memory_region_init_io(&s->mmio, obj, &stm32l4x5_usart_base_ops, s, |
| TYPE_STM32L4X5_USART_BASE, 0x400); |
| sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); |
| |
| s->clk = qdev_init_clock_in(DEVICE(s), "clk", NULL, s, 0); |
| } |
| |
| static int stm32l4x5_usart_base_post_load(void *opaque, int version_id) |
| { |
| Stm32l4x5UsartBaseState *s = (Stm32l4x5UsartBaseState *)opaque; |
| |
| stm32l4x5_update_params(s); |
| return 0; |
| } |
| |
| static const VMStateDescription vmstate_stm32l4x5_usart_base = { |
| .name = TYPE_STM32L4X5_USART_BASE, |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .post_load = stm32l4x5_usart_base_post_load, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32(cr1, Stm32l4x5UsartBaseState), |
| VMSTATE_UINT32(cr2, Stm32l4x5UsartBaseState), |
| VMSTATE_UINT32(cr3, Stm32l4x5UsartBaseState), |
| VMSTATE_UINT32(brr, Stm32l4x5UsartBaseState), |
| VMSTATE_UINT32(gtpr, Stm32l4x5UsartBaseState), |
| VMSTATE_UINT32(rtor, Stm32l4x5UsartBaseState), |
| VMSTATE_UINT32(isr, Stm32l4x5UsartBaseState), |
| VMSTATE_UINT32(rdr, Stm32l4x5UsartBaseState), |
| VMSTATE_UINT32(tdr, Stm32l4x5UsartBaseState), |
| VMSTATE_CLOCK(clk, Stm32l4x5UsartBaseState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| |
| static void stm32l4x5_usart_base_realize(DeviceState *dev, Error **errp) |
| { |
| ERRP_GUARD(); |
| Stm32l4x5UsartBaseState *s = STM32L4X5_USART_BASE(dev); |
| if (!clock_has_source(s->clk)) { |
| error_setg(errp, "USART clock must be wired up by SoC code"); |
| return; |
| } |
| |
| qemu_chr_fe_set_handlers(&s->chr, stm32l4x5_usart_base_can_receive, |
| stm32l4x5_usart_base_receive, NULL, NULL, |
| s, NULL, true); |
| } |
| |
| static void stm32l4x5_usart_base_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| ResettableClass *rc = RESETTABLE_CLASS(klass); |
| |
| rc->phases.hold = stm32l4x5_usart_base_reset_hold; |
| device_class_set_props(dc, stm32l4x5_usart_base_properties); |
| dc->realize = stm32l4x5_usart_base_realize; |
| dc->vmsd = &vmstate_stm32l4x5_usart_base; |
| } |
| |
| static void stm32l4x5_usart_class_init(ObjectClass *oc, void *data) |
| { |
| Stm32l4x5UsartBaseClass *subc = STM32L4X5_USART_BASE_CLASS(oc); |
| |
| subc->type = STM32L4x5_USART; |
| } |
| |
| static void stm32l4x5_uart_class_init(ObjectClass *oc, void *data) |
| { |
| Stm32l4x5UsartBaseClass *subc = STM32L4X5_USART_BASE_CLASS(oc); |
| |
| subc->type = STM32L4x5_UART; |
| } |
| |
| static void stm32l4x5_lpuart_class_init(ObjectClass *oc, void *data) |
| { |
| Stm32l4x5UsartBaseClass *subc = STM32L4X5_USART_BASE_CLASS(oc); |
| |
| subc->type = STM32L4x5_LPUART; |
| } |
| |
| static const TypeInfo stm32l4x5_usart_types[] = { |
| { |
| .name = TYPE_STM32L4X5_USART_BASE, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(Stm32l4x5UsartBaseState), |
| .instance_init = stm32l4x5_usart_base_init, |
| .class_size = sizeof(Stm32l4x5UsartBaseClass), |
| .class_init = stm32l4x5_usart_base_class_init, |
| .abstract = true, |
| }, { |
| .name = TYPE_STM32L4X5_USART, |
| .parent = TYPE_STM32L4X5_USART_BASE, |
| .class_init = stm32l4x5_usart_class_init, |
| }, { |
| .name = TYPE_STM32L4X5_UART, |
| .parent = TYPE_STM32L4X5_USART_BASE, |
| .class_init = stm32l4x5_uart_class_init, |
| }, { |
| .name = TYPE_STM32L4X5_LPUART, |
| .parent = TYPE_STM32L4X5_USART_BASE, |
| .class_init = stm32l4x5_lpuart_class_init, |
| } |
| }; |
| |
| DEFINE_TYPES(stm32l4x5_usart_types) |
