| /* |
| * Virtio Support |
| * |
| * Copyright IBM, Corp. 2007 |
| * |
| * Authors: |
| * Anthony Liguori <aliguori@us.ibm.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2. See |
| * the COPYING file in the top-level directory. |
| * |
| */ |
| |
| #ifndef _QEMU_VIRTIO_H |
| #define _QEMU_VIRTIO_H |
| |
| #include "hw.h" |
| #include "net.h" |
| #include "qdev.h" |
| #include "sysemu.h" |
| #include "block.h" |
| #include "event_notifier.h" |
| #ifdef CONFIG_LINUX |
| #include "9p.h" |
| #endif |
| |
| /* from Linux's linux/virtio_config.h */ |
| |
| /* Status byte for guest to report progress, and synchronize features. */ |
| /* We have seen device and processed generic fields (VIRTIO_CONFIG_F_VIRTIO) */ |
| #define VIRTIO_CONFIG_S_ACKNOWLEDGE 1 |
| /* We have found a driver for the device. */ |
| #define VIRTIO_CONFIG_S_DRIVER 2 |
| /* Driver has used its parts of the config, and is happy */ |
| #define VIRTIO_CONFIG_S_DRIVER_OK 4 |
| /* We've given up on this device. */ |
| #define VIRTIO_CONFIG_S_FAILED 0x80 |
| |
| /* Some virtio feature bits (currently bits 28 through 31) are reserved for the |
| * transport being used (eg. virtio_ring), the rest are per-device feature bits. */ |
| #define VIRTIO_TRANSPORT_F_START 28 |
| #define VIRTIO_TRANSPORT_F_END 32 |
| |
| /* We notify when the ring is completely used, even if the guest is suppressing |
| * callbacks */ |
| #define VIRTIO_F_NOTIFY_ON_EMPTY 24 |
| /* We support indirect buffer descriptors */ |
| #define VIRTIO_RING_F_INDIRECT_DESC 28 |
| /* The Guest publishes the used index for which it expects an interrupt |
| * at the end of the avail ring. Host should ignore the avail->flags field. */ |
| /* The Host publishes the avail index for which it expects a kick |
| * at the end of the used ring. Guest should ignore the used->flags field. */ |
| #define VIRTIO_RING_F_EVENT_IDX 29 |
| /* A guest should never accept this. It implies negotiation is broken. */ |
| #define VIRTIO_F_BAD_FEATURE 30 |
| |
| /* from Linux's linux/virtio_ring.h */ |
| |
| /* This marks a buffer as continuing via the next field. */ |
| #define VRING_DESC_F_NEXT 1 |
| /* This marks a buffer as write-only (otherwise read-only). */ |
| #define VRING_DESC_F_WRITE 2 |
| /* This means the buffer contains a list of buffer descriptors. */ |
| #define VRING_DESC_F_INDIRECT 4 |
| |
| /* This means don't notify other side when buffer added. */ |
| #define VRING_USED_F_NO_NOTIFY 1 |
| /* This means don't interrupt guest when buffer consumed. */ |
| #define VRING_AVAIL_F_NO_INTERRUPT 1 |
| |
| struct VirtQueue; |
| |
| static inline target_phys_addr_t vring_align(target_phys_addr_t addr, |
| unsigned long align) |
| { |
| return (addr + align - 1) & ~(align - 1); |
| } |
| |
| typedef struct VirtQueue VirtQueue; |
| |
| #define VIRTQUEUE_MAX_SIZE 1024 |
| |
| typedef struct VirtQueueElement |
| { |
| unsigned int index; |
| unsigned int out_num; |
| unsigned int in_num; |
| target_phys_addr_t in_addr[VIRTQUEUE_MAX_SIZE]; |
| target_phys_addr_t out_addr[VIRTQUEUE_MAX_SIZE]; |
| struct iovec in_sg[VIRTQUEUE_MAX_SIZE]; |
| struct iovec out_sg[VIRTQUEUE_MAX_SIZE]; |
| } VirtQueueElement; |
| |
| typedef struct { |
| void (*notify)(void * opaque, uint16_t vector); |
| void (*save_config)(void * opaque, QEMUFile *f); |
| void (*save_queue)(void * opaque, int n, QEMUFile *f); |
| int (*load_config)(void * opaque, QEMUFile *f); |
| int (*load_queue)(void * opaque, int n, QEMUFile *f); |
| int (*load_done)(void * opaque, QEMUFile *f); |
| unsigned (*get_features)(void * opaque); |
| bool (*query_guest_notifiers)(void * opaque); |
| int (*set_guest_notifiers)(void * opaque, bool assigned); |
| int (*set_host_notifier)(void * opaque, int n, bool assigned); |
| void (*vmstate_change)(void * opaque, bool running); |
| } VirtIOBindings; |
| |
| #define VIRTIO_PCI_QUEUE_MAX 64 |
| |
| #define VIRTIO_NO_VECTOR 0xffff |
| |
| struct VirtIODevice |
| { |
| const char *name; |
| uint8_t status; |
| uint8_t isr; |
| uint16_t queue_sel; |
| uint32_t guest_features; |
| size_t config_len; |
| void *config; |
| uint16_t config_vector; |
| int nvectors; |
| uint32_t (*get_features)(VirtIODevice *vdev, uint32_t requested_features); |
| uint32_t (*bad_features)(VirtIODevice *vdev); |
| void (*set_features)(VirtIODevice *vdev, uint32_t val); |
| void (*get_config)(VirtIODevice *vdev, uint8_t *config); |
| void (*set_config)(VirtIODevice *vdev, const uint8_t *config); |
| void (*reset)(VirtIODevice *vdev); |
| void (*set_status)(VirtIODevice *vdev, uint8_t val); |
| VirtQueue *vq; |
| const VirtIOBindings *binding; |
| void *binding_opaque; |
| uint16_t device_id; |
| bool vm_running; |
| VMChangeStateEntry *vmstate; |
| }; |
| |
| VirtQueue *virtio_add_queue(VirtIODevice *vdev, int queue_size, |
| void (*handle_output)(VirtIODevice *, |
| VirtQueue *)); |
| |
| void virtqueue_push(VirtQueue *vq, const VirtQueueElement *elem, |
| unsigned int len); |
| void virtqueue_flush(VirtQueue *vq, unsigned int count); |
| void virtqueue_fill(VirtQueue *vq, const VirtQueueElement *elem, |
| unsigned int len, unsigned int idx); |
| |
| void virtqueue_map_sg(struct iovec *sg, target_phys_addr_t *addr, |
| size_t num_sg, int is_write); |
| int virtqueue_pop(VirtQueue *vq, VirtQueueElement *elem); |
| int virtqueue_avail_bytes(VirtQueue *vq, int in_bytes, int out_bytes); |
| |
| void virtio_notify(VirtIODevice *vdev, VirtQueue *vq); |
| |
| void virtio_save(VirtIODevice *vdev, QEMUFile *f); |
| |
| int virtio_load(VirtIODevice *vdev, QEMUFile *f); |
| |
| void virtio_cleanup(VirtIODevice *vdev); |
| |
| void virtio_notify_config(VirtIODevice *vdev); |
| |
| void virtio_queue_set_notification(VirtQueue *vq, int enable); |
| |
| int virtio_queue_ready(VirtQueue *vq); |
| |
| int virtio_queue_empty(VirtQueue *vq); |
| |
| /* Host binding interface. */ |
| |
| VirtIODevice *virtio_common_init(const char *name, uint16_t device_id, |
| size_t config_size, size_t struct_size); |
| uint32_t virtio_config_readb(VirtIODevice *vdev, uint32_t addr); |
| uint32_t virtio_config_readw(VirtIODevice *vdev, uint32_t addr); |
| uint32_t virtio_config_readl(VirtIODevice *vdev, uint32_t addr); |
| void virtio_config_writeb(VirtIODevice *vdev, uint32_t addr, uint32_t data); |
| void virtio_config_writew(VirtIODevice *vdev, uint32_t addr, uint32_t data); |
| void virtio_config_writel(VirtIODevice *vdev, uint32_t addr, uint32_t data); |
| void virtio_queue_set_addr(VirtIODevice *vdev, int n, target_phys_addr_t addr); |
| target_phys_addr_t virtio_queue_get_addr(VirtIODevice *vdev, int n); |
| int virtio_queue_get_num(VirtIODevice *vdev, int n); |
| void virtio_queue_notify(VirtIODevice *vdev, int n); |
| uint16_t virtio_queue_vector(VirtIODevice *vdev, int n); |
| void virtio_queue_set_vector(VirtIODevice *vdev, int n, uint16_t vector); |
| void virtio_set_status(VirtIODevice *vdev, uint8_t val); |
| void virtio_reset(void *opaque); |
| void virtio_update_irq(VirtIODevice *vdev); |
| int virtio_set_features(VirtIODevice *vdev, uint32_t val); |
| |
| void virtio_bind_device(VirtIODevice *vdev, const VirtIOBindings *binding, |
| void *opaque); |
| |
| /* Base devices. */ |
| VirtIODevice *virtio_blk_init(DeviceState *dev, BlockConf *conf, |
| char **serial); |
| struct virtio_net_conf; |
| VirtIODevice *virtio_net_init(DeviceState *dev, NICConf *conf, |
| struct virtio_net_conf *net); |
| typedef struct virtio_serial_conf virtio_serial_conf; |
| VirtIODevice *virtio_serial_init(DeviceState *dev, virtio_serial_conf *serial); |
| VirtIODevice *virtio_balloon_init(DeviceState *dev); |
| typedef struct VirtIOSCSIConf VirtIOSCSIConf; |
| VirtIODevice *virtio_scsi_init(DeviceState *dev, VirtIOSCSIConf *conf); |
| #ifdef CONFIG_LINUX |
| VirtIODevice *virtio_9p_init(DeviceState *dev, V9fsConf *conf); |
| #endif |
| |
| |
| void virtio_net_exit(VirtIODevice *vdev); |
| void virtio_blk_exit(VirtIODevice *vdev); |
| void virtio_serial_exit(VirtIODevice *vdev); |
| void virtio_balloon_exit(VirtIODevice *vdev); |
| void virtio_scsi_exit(VirtIODevice *vdev); |
| |
| #define DEFINE_VIRTIO_COMMON_FEATURES(_state, _field) \ |
| DEFINE_PROP_BIT("indirect_desc", _state, _field, \ |
| VIRTIO_RING_F_INDIRECT_DESC, true), \ |
| DEFINE_PROP_BIT("event_idx", _state, _field, \ |
| VIRTIO_RING_F_EVENT_IDX, true) |
| |
| target_phys_addr_t virtio_queue_get_desc_addr(VirtIODevice *vdev, int n); |
| target_phys_addr_t virtio_queue_get_avail_addr(VirtIODevice *vdev, int n); |
| target_phys_addr_t virtio_queue_get_used_addr(VirtIODevice *vdev, int n); |
| target_phys_addr_t virtio_queue_get_ring_addr(VirtIODevice *vdev, int n); |
| target_phys_addr_t virtio_queue_get_desc_size(VirtIODevice *vdev, int n); |
| target_phys_addr_t virtio_queue_get_avail_size(VirtIODevice *vdev, int n); |
| target_phys_addr_t virtio_queue_get_used_size(VirtIODevice *vdev, int n); |
| target_phys_addr_t virtio_queue_get_ring_size(VirtIODevice *vdev, int n); |
| uint16_t virtio_queue_get_last_avail_idx(VirtIODevice *vdev, int n); |
| void virtio_queue_set_last_avail_idx(VirtIODevice *vdev, int n, uint16_t idx); |
| VirtQueue *virtio_get_queue(VirtIODevice *vdev, int n); |
| EventNotifier *virtio_queue_get_guest_notifier(VirtQueue *vq); |
| EventNotifier *virtio_queue_get_host_notifier(VirtQueue *vq); |
| void virtio_queue_notify_vq(VirtQueue *vq); |
| void virtio_irq(VirtQueue *vq); |
| #endif |