| /* |
| * Dedicated thread for virtio-blk I/O processing |
| * |
| * Copyright 2012 IBM, Corp. |
| * Copyright 2012 Red Hat, Inc. and/or its affiliates |
| * |
| * Authors: |
| * Stefan Hajnoczi <stefanha@redhat.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| * |
| */ |
| |
| #include "trace.h" |
| #include "qemu/iov.h" |
| #include "qemu/thread.h" |
| #include "qemu/error-report.h" |
| #include "hw/virtio/dataplane/vring.h" |
| #include "ioq.h" |
| #include "block/block.h" |
| #include "hw/virtio/virtio-blk.h" |
| #include "virtio-blk.h" |
| #include "block/aio.h" |
| #include "hw/virtio/virtio-bus.h" |
| |
| enum { |
| SEG_MAX = 126, /* maximum number of I/O segments */ |
| VRING_MAX = SEG_MAX + 2, /* maximum number of vring descriptors */ |
| REQ_MAX = VRING_MAX, /* maximum number of requests in the vring, |
| * is VRING_MAX / 2 with traditional and |
| * VRING_MAX with indirect descriptors */ |
| }; |
| |
| typedef struct { |
| struct iocb iocb; /* Linux AIO control block */ |
| QEMUIOVector *inhdr; /* iovecs for virtio_blk_inhdr */ |
| VirtQueueElement *elem; /* saved data from the virtqueue */ |
| struct iovec *bounce_iov; /* used if guest buffers are unaligned */ |
| QEMUIOVector *read_qiov; /* for read completion /w bounce buffer */ |
| } VirtIOBlockRequest; |
| |
| struct VirtIOBlockDataPlane { |
| bool started; |
| bool starting; |
| bool stopping; |
| QEMUBH *start_bh; |
| QemuThread thread; |
| |
| VirtIOBlkConf *blk; |
| int fd; /* image file descriptor */ |
| |
| VirtIODevice *vdev; |
| Vring vring; /* virtqueue vring */ |
| EventNotifier *guest_notifier; /* irq */ |
| |
| /* Note that these EventNotifiers are assigned by value. This is |
| * fine as long as you do not call event_notifier_cleanup on them |
| * (because you don't own the file descriptor or handle; you just |
| * use it). |
| */ |
| AioContext *ctx; |
| EventNotifier io_notifier; /* Linux AIO completion */ |
| EventNotifier host_notifier; /* doorbell */ |
| |
| IOQueue ioqueue; /* Linux AIO queue (should really be per |
| dataplane thread) */ |
| VirtIOBlockRequest requests[REQ_MAX]; /* pool of requests, managed by the |
| queue */ |
| |
| unsigned int num_reqs; |
| }; |
| |
| /* Raise an interrupt to signal guest, if necessary */ |
| static void notify_guest(VirtIOBlockDataPlane *s) |
| { |
| if (!vring_should_notify(s->vdev, &s->vring)) { |
| return; |
| } |
| |
| event_notifier_set(s->guest_notifier); |
| } |
| |
| static void complete_request(struct iocb *iocb, ssize_t ret, void *opaque) |
| { |
| VirtIOBlockDataPlane *s = opaque; |
| VirtIOBlockRequest *req = container_of(iocb, VirtIOBlockRequest, iocb); |
| struct virtio_blk_inhdr hdr; |
| int len; |
| |
| if (likely(ret >= 0)) { |
| hdr.status = VIRTIO_BLK_S_OK; |
| len = ret; |
| } else { |
| hdr.status = VIRTIO_BLK_S_IOERR; |
| len = 0; |
| } |
| |
| trace_virtio_blk_data_plane_complete_request(s, req->elem->index, ret); |
| |
| if (req->read_qiov) { |
| assert(req->bounce_iov); |
| qemu_iovec_from_buf(req->read_qiov, 0, req->bounce_iov->iov_base, len); |
| qemu_iovec_destroy(req->read_qiov); |
| g_slice_free(QEMUIOVector, req->read_qiov); |
| } |
| |
| if (req->bounce_iov) { |
| qemu_vfree(req->bounce_iov->iov_base); |
| g_slice_free(struct iovec, req->bounce_iov); |
| } |
| |
| qemu_iovec_from_buf(req->inhdr, 0, &hdr, sizeof(hdr)); |
| qemu_iovec_destroy(req->inhdr); |
| g_slice_free(QEMUIOVector, req->inhdr); |
| |
| /* According to the virtio specification len should be the number of bytes |
| * written to, but for virtio-blk it seems to be the number of bytes |
| * transferred plus the status bytes. |
| */ |
| vring_push(&s->vring, req->elem, len + sizeof(hdr)); |
| req->elem = NULL; |
| s->num_reqs--; |
| } |
| |
| static void complete_request_early(VirtIOBlockDataPlane *s, VirtQueueElement *elem, |
| QEMUIOVector *inhdr, unsigned char status) |
| { |
| struct virtio_blk_inhdr hdr = { |
| .status = status, |
| }; |
| |
| qemu_iovec_from_buf(inhdr, 0, &hdr, sizeof(hdr)); |
| qemu_iovec_destroy(inhdr); |
| g_slice_free(QEMUIOVector, inhdr); |
| |
| vring_push(&s->vring, elem, sizeof(hdr)); |
| notify_guest(s); |
| } |
| |
| /* Get disk serial number */ |
| static void do_get_id_cmd(VirtIOBlockDataPlane *s, |
| struct iovec *iov, unsigned int iov_cnt, |
| VirtQueueElement *elem, QEMUIOVector *inhdr) |
| { |
| char id[VIRTIO_BLK_ID_BYTES]; |
| |
| /* Serial number not NUL-terminated when longer than buffer */ |
| strncpy(id, s->blk->serial ? s->blk->serial : "", sizeof(id)); |
| iov_from_buf(iov, iov_cnt, 0, id, sizeof(id)); |
| complete_request_early(s, elem, inhdr, VIRTIO_BLK_S_OK); |
| } |
| |
| static int do_rdwr_cmd(VirtIOBlockDataPlane *s, bool read, |
| struct iovec *iov, unsigned iov_cnt, |
| long long offset, VirtQueueElement *elem, |
| QEMUIOVector *inhdr) |
| { |
| struct iocb *iocb; |
| QEMUIOVector qiov; |
| struct iovec *bounce_iov = NULL; |
| QEMUIOVector *read_qiov = NULL; |
| |
| qemu_iovec_init_external(&qiov, iov, iov_cnt); |
| if (!bdrv_qiov_is_aligned(s->blk->conf.bs, &qiov)) { |
| void *bounce_buffer = qemu_blockalign(s->blk->conf.bs, qiov.size); |
| |
| if (read) { |
| /* Need to copy back from bounce buffer on completion */ |
| read_qiov = g_slice_new(QEMUIOVector); |
| qemu_iovec_init(read_qiov, iov_cnt); |
| qemu_iovec_concat_iov(read_qiov, iov, iov_cnt, 0, qiov.size); |
| } else { |
| qemu_iovec_to_buf(&qiov, 0, bounce_buffer, qiov.size); |
| } |
| |
| /* Redirect I/O to aligned bounce buffer */ |
| bounce_iov = g_slice_new(struct iovec); |
| bounce_iov->iov_base = bounce_buffer; |
| bounce_iov->iov_len = qiov.size; |
| iov = bounce_iov; |
| iov_cnt = 1; |
| } |
| |
| iocb = ioq_rdwr(&s->ioqueue, read, iov, iov_cnt, offset); |
| |
| /* Fill in virtio block metadata needed for completion */ |
| VirtIOBlockRequest *req = container_of(iocb, VirtIOBlockRequest, iocb); |
| req->elem = elem; |
| req->inhdr = inhdr; |
| req->bounce_iov = bounce_iov; |
| req->read_qiov = read_qiov; |
| return 0; |
| } |
| |
| static int process_request(IOQueue *ioq, VirtQueueElement *elem) |
| { |
| VirtIOBlockDataPlane *s = container_of(ioq, VirtIOBlockDataPlane, ioqueue); |
| struct iovec *iov = elem->out_sg; |
| struct iovec *in_iov = elem->in_sg; |
| unsigned out_num = elem->out_num; |
| unsigned in_num = elem->in_num; |
| struct virtio_blk_outhdr outhdr; |
| QEMUIOVector *inhdr; |
| size_t in_size; |
| |
| /* Copy in outhdr */ |
| if (unlikely(iov_to_buf(iov, out_num, 0, &outhdr, |
| sizeof(outhdr)) != sizeof(outhdr))) { |
| error_report("virtio-blk request outhdr too short"); |
| return -EFAULT; |
| } |
| iov_discard_front(&iov, &out_num, sizeof(outhdr)); |
| |
| /* Grab inhdr for later */ |
| in_size = iov_size(in_iov, in_num); |
| if (in_size < sizeof(struct virtio_blk_inhdr)) { |
| error_report("virtio_blk request inhdr too short"); |
| return -EFAULT; |
| } |
| inhdr = g_slice_new(QEMUIOVector); |
| qemu_iovec_init(inhdr, 1); |
| qemu_iovec_concat_iov(inhdr, in_iov, in_num, |
| in_size - sizeof(struct virtio_blk_inhdr), |
| sizeof(struct virtio_blk_inhdr)); |
| iov_discard_back(in_iov, &in_num, sizeof(struct virtio_blk_inhdr)); |
| |
| /* TODO Linux sets the barrier bit even when not advertised! */ |
| outhdr.type &= ~VIRTIO_BLK_T_BARRIER; |
| |
| switch (outhdr.type) { |
| case VIRTIO_BLK_T_IN: |
| do_rdwr_cmd(s, true, in_iov, in_num, outhdr.sector * 512, elem, inhdr); |
| return 0; |
| |
| case VIRTIO_BLK_T_OUT: |
| do_rdwr_cmd(s, false, iov, out_num, outhdr.sector * 512, elem, inhdr); |
| return 0; |
| |
| case VIRTIO_BLK_T_SCSI_CMD: |
| /* TODO support SCSI commands */ |
| complete_request_early(s, elem, inhdr, VIRTIO_BLK_S_UNSUPP); |
| return 0; |
| |
| case VIRTIO_BLK_T_FLUSH: |
| /* TODO fdsync not supported by Linux AIO, do it synchronously here! */ |
| if (qemu_fdatasync(s->fd) < 0) { |
| complete_request_early(s, elem, inhdr, VIRTIO_BLK_S_IOERR); |
| } else { |
| complete_request_early(s, elem, inhdr, VIRTIO_BLK_S_OK); |
| } |
| return 0; |
| |
| case VIRTIO_BLK_T_GET_ID: |
| do_get_id_cmd(s, in_iov, in_num, elem, inhdr); |
| return 0; |
| |
| default: |
| error_report("virtio-blk unsupported request type %#x", outhdr.type); |
| qemu_iovec_destroy(inhdr); |
| g_slice_free(QEMUIOVector, inhdr); |
| return -EFAULT; |
| } |
| } |
| |
| static void handle_notify(EventNotifier *e) |
| { |
| VirtIOBlockDataPlane *s = container_of(e, VirtIOBlockDataPlane, |
| host_notifier); |
| |
| VirtQueueElement *elem; |
| int ret; |
| unsigned int num_queued; |
| |
| event_notifier_test_and_clear(&s->host_notifier); |
| for (;;) { |
| /* Disable guest->host notifies to avoid unnecessary vmexits */ |
| vring_disable_notification(s->vdev, &s->vring); |
| |
| for (;;) { |
| ret = vring_pop(s->vdev, &s->vring, &elem); |
| if (ret < 0) { |
| assert(elem == NULL); |
| break; /* no more requests */ |
| } |
| |
| trace_virtio_blk_data_plane_process_request(s, elem->out_num, |
| elem->in_num, elem->index); |
| |
| if (process_request(&s->ioqueue, elem) < 0) { |
| vring_set_broken(&s->vring); |
| vring_free_element(elem); |
| ret = -EFAULT; |
| break; |
| } |
| } |
| |
| if (likely(ret == -EAGAIN)) { /* vring emptied */ |
| /* Re-enable guest->host notifies and stop processing the vring. |
| * But if the guest has snuck in more descriptors, keep processing. |
| */ |
| if (vring_enable_notification(s->vdev, &s->vring)) { |
| break; |
| } |
| } else { /* ret == -ENOBUFS or fatal error, iovecs[] is depleted */ |
| /* Since there are no iovecs[] left, stop processing for now. Do |
| * not re-enable guest->host notifies since the I/O completion |
| * handler knows to check for more vring descriptors anyway. |
| */ |
| break; |
| } |
| } |
| |
| num_queued = ioq_num_queued(&s->ioqueue); |
| if (num_queued > 0) { |
| s->num_reqs += num_queued; |
| |
| int rc = ioq_submit(&s->ioqueue); |
| if (unlikely(rc < 0)) { |
| fprintf(stderr, "ioq_submit failed %d\n", rc); |
| exit(1); |
| } |
| } |
| } |
| |
| static void handle_io(EventNotifier *e) |
| { |
| VirtIOBlockDataPlane *s = container_of(e, VirtIOBlockDataPlane, |
| io_notifier); |
| |
| event_notifier_test_and_clear(&s->io_notifier); |
| if (ioq_run_completion(&s->ioqueue, complete_request, s) > 0) { |
| notify_guest(s); |
| } |
| |
| /* If there were more requests than iovecs, the vring will not be empty yet |
| * so check again. There should now be enough resources to process more |
| * requests. |
| */ |
| if (unlikely(vring_more_avail(&s->vring))) { |
| handle_notify(&s->host_notifier); |
| } |
| } |
| |
| static void *data_plane_thread(void *opaque) |
| { |
| VirtIOBlockDataPlane *s = opaque; |
| |
| while (!s->stopping || s->num_reqs > 0) { |
| aio_poll(s->ctx, true); |
| } |
| return NULL; |
| } |
| |
| static void start_data_plane_bh(void *opaque) |
| { |
| VirtIOBlockDataPlane *s = opaque; |
| |
| qemu_bh_delete(s->start_bh); |
| s->start_bh = NULL; |
| qemu_thread_create(&s->thread, data_plane_thread, |
| s, QEMU_THREAD_JOINABLE); |
| } |
| |
| void virtio_blk_data_plane_create(VirtIODevice *vdev, VirtIOBlkConf *blk, |
| VirtIOBlockDataPlane **dataplane, |
| Error **errp) |
| { |
| VirtIOBlockDataPlane *s; |
| int fd; |
| |
| *dataplane = NULL; |
| |
| if (!blk->data_plane) { |
| return; |
| } |
| |
| if (blk->scsi) { |
| error_setg(errp, |
| "device is incompatible with x-data-plane, use scsi=off"); |
| return; |
| } |
| |
| if (blk->config_wce) { |
| error_setg(errp, "device is incompatible with x-data-plane, " |
| "use config-wce=off"); |
| return; |
| } |
| |
| /* If dataplane is (re-)enabled while the guest is running there could be |
| * block jobs that can conflict. |
| */ |
| if (bdrv_in_use(blk->conf.bs)) { |
| error_setg(errp, |
| "cannot start dataplane thread while device is in use"); |
| return; |
| } |
| |
| fd = raw_get_aio_fd(blk->conf.bs); |
| if (fd < 0) { |
| error_setg(errp, "drive is incompatible with x-data-plane, " |
| "use format=raw,cache=none,aio=native"); |
| return; |
| } |
| |
| s = g_new0(VirtIOBlockDataPlane, 1); |
| s->vdev = vdev; |
| s->fd = fd; |
| s->blk = blk; |
| |
| /* Prevent block operations that conflict with data plane thread */ |
| bdrv_set_in_use(blk->conf.bs, 1); |
| |
| *dataplane = s; |
| } |
| |
| void virtio_blk_data_plane_destroy(VirtIOBlockDataPlane *s) |
| { |
| if (!s) { |
| return; |
| } |
| |
| virtio_blk_data_plane_stop(s); |
| bdrv_set_in_use(s->blk->conf.bs, 0); |
| g_free(s); |
| } |
| |
| void virtio_blk_data_plane_start(VirtIOBlockDataPlane *s) |
| { |
| BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(s->vdev))); |
| VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus); |
| VirtQueue *vq; |
| int i; |
| |
| if (s->started) { |
| return; |
| } |
| |
| if (s->starting) { |
| return; |
| } |
| |
| s->starting = true; |
| |
| vq = virtio_get_queue(s->vdev, 0); |
| if (!vring_setup(&s->vring, s->vdev, 0)) { |
| s->starting = false; |
| return; |
| } |
| |
| s->ctx = aio_context_new(); |
| |
| /* Set up guest notifier (irq) */ |
| if (k->set_guest_notifiers(qbus->parent, 1, true) != 0) { |
| fprintf(stderr, "virtio-blk failed to set guest notifier, " |
| "ensure -enable-kvm is set\n"); |
| exit(1); |
| } |
| s->guest_notifier = virtio_queue_get_guest_notifier(vq); |
| |
| /* Set up virtqueue notify */ |
| if (k->set_host_notifier(qbus->parent, 0, true) != 0) { |
| fprintf(stderr, "virtio-blk failed to set host notifier\n"); |
| exit(1); |
| } |
| s->host_notifier = *virtio_queue_get_host_notifier(vq); |
| aio_set_event_notifier(s->ctx, &s->host_notifier, handle_notify); |
| |
| /* Set up ioqueue */ |
| ioq_init(&s->ioqueue, s->fd, REQ_MAX); |
| for (i = 0; i < ARRAY_SIZE(s->requests); i++) { |
| ioq_put_iocb(&s->ioqueue, &s->requests[i].iocb); |
| } |
| s->io_notifier = *ioq_get_notifier(&s->ioqueue); |
| aio_set_event_notifier(s->ctx, &s->io_notifier, handle_io); |
| |
| s->starting = false; |
| s->started = true; |
| trace_virtio_blk_data_plane_start(s); |
| |
| /* Kick right away to begin processing requests already in vring */ |
| event_notifier_set(virtio_queue_get_host_notifier(vq)); |
| |
| /* Spawn thread in BH so it inherits iothread cpusets */ |
| s->start_bh = qemu_bh_new(start_data_plane_bh, s); |
| qemu_bh_schedule(s->start_bh); |
| } |
| |
| void virtio_blk_data_plane_stop(VirtIOBlockDataPlane *s) |
| { |
| BusState *qbus = BUS(qdev_get_parent_bus(DEVICE(s->vdev))); |
| VirtioBusClass *k = VIRTIO_BUS_GET_CLASS(qbus); |
| if (!s->started || s->stopping) { |
| return; |
| } |
| s->stopping = true; |
| trace_virtio_blk_data_plane_stop(s); |
| |
| /* Stop thread or cancel pending thread creation BH */ |
| if (s->start_bh) { |
| qemu_bh_delete(s->start_bh); |
| s->start_bh = NULL; |
| } else { |
| aio_notify(s->ctx); |
| qemu_thread_join(&s->thread); |
| } |
| |
| aio_set_event_notifier(s->ctx, &s->io_notifier, NULL); |
| ioq_cleanup(&s->ioqueue); |
| |
| aio_set_event_notifier(s->ctx, &s->host_notifier, NULL); |
| k->set_host_notifier(qbus->parent, 0, false); |
| |
| aio_context_unref(s->ctx); |
| |
| /* Clean up guest notifier (irq) */ |
| k->set_guest_notifiers(qbus->parent, 1, false); |
| |
| vring_teardown(&s->vring, s->vdev, 0); |
| s->started = false; |
| s->stopping = false; |
| } |