| |
| /* common syscall defines for all architectures */ |
| |
| #define SOCKOP_socket 1 |
| #define SOCKOP_bind 2 |
| #define SOCKOP_connect 3 |
| #define SOCKOP_listen 4 |
| #define SOCKOP_accept 5 |
| #define SOCKOP_getsockname 6 |
| #define SOCKOP_getpeername 7 |
| #define SOCKOP_socketpair 8 |
| #define SOCKOP_send 9 |
| #define SOCKOP_recv 10 |
| #define SOCKOP_sendto 11 |
| #define SOCKOP_recvfrom 12 |
| #define SOCKOP_shutdown 13 |
| #define SOCKOP_setsockopt 14 |
| #define SOCKOP_getsockopt 15 |
| #define SOCKOP_sendmsg 16 |
| #define SOCKOP_recvmsg 17 |
| |
| struct target_timeval { |
| target_long tv_sec; |
| target_long tv_usec; |
| }; |
| |
| struct target_timespec { |
| target_long tv_sec; |
| target_long tv_nsec; |
| }; |
| |
| struct target_itimerval { |
| struct target_timeval it_interval; |
| struct target_timeval it_value; |
| }; |
| |
| struct target_iovec { |
| target_long iov_base; /* Starting address */ |
| target_long iov_len; /* Number of bytes */ |
| }; |
| |
| struct target_msghdr { |
| target_long msg_name; /* Socket name */ |
| int msg_namelen; /* Length of name */ |
| target_long msg_iov; /* Data blocks */ |
| target_long msg_iovlen; /* Number of blocks */ |
| target_long msg_control; /* Per protocol magic (eg BSD file descriptor passing) */ |
| target_long msg_controllen; /* Length of cmsg list */ |
| unsigned int msg_flags; |
| }; |
| |
| struct target_rusage { |
| struct target_timeval ru_utime; /* user time used */ |
| struct target_timeval ru_stime; /* system time used */ |
| target_long ru_maxrss; /* maximum resident set size */ |
| target_long ru_ixrss; /* integral shared memory size */ |
| target_long ru_idrss; /* integral unshared data size */ |
| target_long ru_isrss; /* integral unshared stack size */ |
| target_long ru_minflt; /* page reclaims */ |
| target_long ru_majflt; /* page faults */ |
| target_long ru_nswap; /* swaps */ |
| target_long ru_inblock; /* block input operations */ |
| target_long ru_oublock; /* block output operations */ |
| target_long ru_msgsnd; /* messages sent */ |
| target_long ru_msgrcv; /* messages received */ |
| target_long ru_nsignals; /* signals received */ |
| target_long ru_nvcsw; /* voluntary context switches */ |
| target_long ru_nivcsw; /* involuntary " */ |
| }; |
| |
| typedef struct { |
| int val[2]; |
| } kernel_fsid_t; |
| |
| struct kernel_statfs { |
| int f_type; |
| int f_bsize; |
| int f_blocks; |
| int f_bfree; |
| int f_bavail; |
| int f_files; |
| int f_ffree; |
| kernel_fsid_t f_fsid; |
| int f_namelen; |
| int f_spare[6]; |
| }; |
| |
| struct target_dirent { |
| target_long d_ino; |
| target_long d_off; |
| unsigned short d_reclen; |
| char d_name[256]; /* We must not include limits.h! */ |
| }; |
| |
| struct target_dirent64 { |
| uint64_t d_ino; |
| int64_t d_off; |
| unsigned short d_reclen; |
| unsigned char d_type; |
| char d_name[256]; |
| }; |
| |
| |
| /* mostly generic signal stuff */ |
| #define TARGET_SIG_DFL ((target_long)0) /* default signal handling */ |
| #define TARGET_SIG_IGN ((target_long)1) /* ignore signal */ |
| #define TARGET_SIG_ERR ((target_long)-1) /* error return from signal */ |
| |
| #ifdef TARGET_MIPS |
| #define TARGET_NSIG 128 |
| #else |
| #define TARGET_NSIG 64 |
| #endif |
| #define TARGET_NSIG_BPW TARGET_LONG_BITS |
| #define TARGET_NSIG_WORDS (TARGET_NSIG / TARGET_NSIG_BPW) |
| |
| typedef struct { |
| target_ulong sig[TARGET_NSIG_WORDS]; |
| } target_sigset_t; |
| |
| #ifdef BSWAP_NEEDED |
| static inline void tswap_sigset(target_sigset_t *d, const target_sigset_t *s) |
| { |
| int i; |
| for(i = 0;i < TARGET_NSIG_WORDS; i++) |
| d->sig[i] = tswapl(s->sig[i]); |
| } |
| #else |
| static inline void tswap_sigset(target_sigset_t *d, const target_sigset_t *s) |
| { |
| *d = *s; |
| } |
| #endif |
| |
| static inline void target_siginitset(target_sigset_t *d, target_ulong set) |
| { |
| int i; |
| d->sig[0] = set; |
| for(i = 1;i < TARGET_NSIG_WORDS; i++) |
| d->sig[i] = 0; |
| } |
| |
| void host_to_target_sigset(target_sigset_t *d, sigset_t *s); |
| void target_to_host_sigset(sigset_t *d, target_sigset_t *s); |
| void host_to_target_old_sigset(target_ulong *old_sigset, |
| const sigset_t *sigset); |
| void target_to_host_old_sigset(sigset_t *sigset, |
| const target_ulong *old_sigset); |
| struct target_sigaction; |
| int do_sigaction(int sig, const struct target_sigaction *act, |
| struct target_sigaction *oact); |
| |
| struct target_rlimit { |
| target_ulong rlim_cur; |
| target_ulong rlim_max; |
| }; |
| |
| struct target_pollfd { |
| int fd; /* file descriptor */ |
| short events; /* requested events */ |
| short revents; /* returned events */ |
| }; |
| |
| /* Networking ioctls */ |
| #define TARGET_SIOCADDRT 0x890B /* add routing table entry */ |
| #define TARGET_SIOCDELRT 0x890C /* delete routing table entry */ |
| #define TARGET_SIOCGIFNAME 0x8910 /* get iface name */ |
| #define TARGET_SIOCSIFLINK 0x8911 /* set iface channel */ |
| #define TARGET_SIOCGIFCONF 0x8912 /* get iface list */ |
| #define TARGET_SIOCGIFFLAGS 0x8913 /* get flags */ |
| #define TARGET_SIOCSIFFLAGS 0x8914 /* set flags */ |
| #define TARGET_SIOCGIFADDR 0x8915 /* get PA address */ |
| #define TARGET_SIOCSIFADDR 0x8916 /* set PA address */ |
| #define TARGET_SIOCGIFDSTADDR 0x8917 /* get remote PA address */ |
| #define TARGET_SIOCSIFDSTADDR 0x8918 /* set remote PA address */ |
| #define TARGET_SIOCGIFBRDADDR 0x8919 /* get broadcast PA address */ |
| #define TARGET_SIOCSIFBRDADDR 0x891a /* set broadcast PA address */ |
| #define TARGET_SIOCGIFNETMASK 0x891b /* get network PA mask */ |
| #define TARGET_SIOCSIFNETMASK 0x891c /* set network PA mask */ |
| #define TARGET_SIOCGIFMETRIC 0x891d /* get metric */ |
| #define TARGET_SIOCSIFMETRIC 0x891e /* set metric */ |
| #define TARGET_SIOCGIFMEM 0x891f /* get memory address (BSD) */ |
| #define TARGET_SIOCSIFMEM 0x8920 /* set memory address (BSD) */ |
| #define TARGET_SIOCGIFMTU 0x8921 /* get MTU size */ |
| #define TARGET_SIOCSIFMTU 0x8922 /* set MTU size */ |
| #define TARGET_SIOCSIFHWADDR 0x8924 /* set hardware address (NI) */ |
| #define TARGET_SIOCGIFENCAP 0x8925 /* get/set slip encapsulation */ |
| #define TARGET_SIOCSIFENCAP 0x8926 |
| #define TARGET_SIOCGIFHWADDR 0x8927 /* Get hardware address */ |
| #define TARGET_SIOCGIFSLAVE 0x8929 /* Driver slaving support */ |
| #define TARGET_SIOCSIFSLAVE 0x8930 |
| #define TARGET_SIOCADDMULTI 0x8931 /* Multicast address lists */ |
| #define TARGET_SIOCDELMULTI 0x8932 |
| |
| /* Bridging control calls */ |
| #define TARGET_SIOCGIFBR 0x8940 /* Bridging support */ |
| #define TARGET_SIOCSIFBR 0x8941 /* Set bridging options */ |
| |
| #define TARGET_SIOCGIFTXQLEN 0x8942 /* Get the tx queue length */ |
| #define TARGET_SIOCSIFTXQLEN 0x8943 /* Set the tx queue length */ |
| |
| /* ARP cache control calls. */ |
| #define TARGET_OLD_SIOCDARP 0x8950 /* old delete ARP table entry */ |
| #define TARGET_OLD_SIOCGARP 0x8951 /* old get ARP table entry */ |
| #define TARGET_OLD_SIOCSARP 0x8952 /* old set ARP table entry */ |
| #define TARGET_SIOCDARP 0x8953 /* delete ARP table entry */ |
| #define TARGET_SIOCGARP 0x8954 /* get ARP table entry */ |
| #define TARGET_SIOCSARP 0x8955 /* set ARP table entry */ |
| |
| /* RARP cache control calls. */ |
| #define TARGET_SIOCDRARP 0x8960 /* delete RARP table entry */ |
| #define TARGET_SIOCGRARP 0x8961 /* get RARP table entry */ |
| #define TARGET_SIOCSRARP 0x8962 /* set RARP table entry */ |
| |
| /* Driver configuration calls */ |
| #define TARGET_SIOCGIFMAP 0x8970 /* Get device parameters */ |
| #define TARGET_SIOCSIFMAP 0x8971 /* Set device parameters */ |
| |
| /* DLCI configuration calls */ |
| #define TARGET_SIOCADDDLCI 0x8980 /* Create new DLCI device */ |
| #define TARGET_SIOCDELDLCI 0x8981 /* Delete DLCI device */ |
| |
| |
| /* From <linux/fs.h> */ |
| |
| #define TARGET_BLKROSET TARGET_IO(0x12,93) /* set device read-only (0 = read-write) */ |
| #define TARGET_BLKROGET TARGET_IO(0x12,94) /* get read-only status (0 = read_write) */ |
| #define TARGET_BLKRRPART TARGET_IO(0x12,95) /* re-read partition table */ |
| #define TARGET_BLKGETSIZE TARGET_IO(0x12,96) /* return device size /512 (long *arg) */ |
| #define TARGET_BLKFLSBUF TARGET_IO(0x12,97) /* flush buffer cache */ |
| #define TARGET_BLKRASET TARGET_IO(0x12,98) /* Set read ahead for block device */ |
| #define TARGET_BLKRAGET TARGET_IO(0x12,99) /* get current read ahead setting */ |
| #define TARGET_BLKFRASET TARGET_IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */ |
| #define TARGET_BLKFRAGET TARGET_IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */ |
| #define TARGET_BLKSECTSET TARGET_IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */ |
| #define TARGET_BLKSECTGET TARGET_IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */ |
| #define TARGET_BLKSSZGET TARGET_IO(0x12,104)/* get block device sector size */ |
| /* A jump here: 108-111 have been used for various private purposes. */ |
| #define TARGET_BLKBSZGET TARGET_IOR(0x12,112,sizeof(int)) |
| #define TARGET_BLKBSZSET TARGET_IOW(0x12,113,sizeof(int)) |
| #define TARGET_BLKGETSIZE64 TARGET_IOR(0x12,114,sizeof(uint64_t)) /* return device size in bytes (u64 *arg) */ |
| #define TARGET_FIBMAP TARGET_IO(0x00,1) /* bmap access */ |
| #define TARGET_FIGETBSZ TARGET_IO(0x00,2) /* get the block size used for bmap */ |
| |
| /* cdrom commands */ |
| #define TARGET_CDROMPAUSE 0x5301 /* Pause Audio Operation */ |
| #define TARGET_CDROMRESUME 0x5302 /* Resume paused Audio Operation */ |
| #define TARGET_CDROMPLAYMSF 0x5303 /* Play Audio MSF (struct cdrom_msf) */ |
| #define TARGET_CDROMPLAYTRKIND 0x5304 /* Play Audio Track/index |
| (struct cdrom_ti) */ |
| #define TARGET_CDROMREADTOCHDR 0x5305 /* Read TOC header |
| (struct cdrom_tochdr) */ |
| #define TARGET_CDROMREADTOCENTRY 0x5306 /* Read TOC entry |
| (struct cdrom_tocentry) */ |
| #define TARGET_CDROMSTOP 0x5307 /* Stop the cdrom drive */ |
| #define TARGET_CDROMSTART 0x5308 /* Start the cdrom drive */ |
| #define TARGET_CDROMEJECT 0x5309 /* Ejects the cdrom media */ |
| #define TARGET_CDROMVOLCTRL 0x530a /* Control output volume |
| (struct cdrom_volctrl) */ |
| #define TARGET_CDROMSUBCHNL 0x530b /* Read subchannel data |
| (struct cdrom_subchnl) */ |
| #define TARGET_CDROMREADMODE2 0x530c /* Read TARGET_CDROM mode 2 data (2336 Bytes) |
| (struct cdrom_read) */ |
| #define TARGET_CDROMREADMODE1 0x530d /* Read TARGET_CDROM mode 1 data (2048 Bytes) |
| (struct cdrom_read) */ |
| #define TARGET_CDROMREADAUDIO 0x530e /* (struct cdrom_read_audio) */ |
| #define TARGET_CDROMEJECT_SW 0x530f /* enable(1)/disable(0) auto-ejecting */ |
| #define TARGET_CDROMMULTISESSION 0x5310 /* Obtain the start-of-last-session |
| address of multi session disks |
| (struct cdrom_multisession) */ |
| #define TARGET_CDROM_GET_MCN 0x5311 /* Obtain the "Universal Product Code" |
| if available (struct cdrom_mcn) */ |
| #define TARGET_CDROM_GET_UPC TARGET_CDROM_GET_MCN /* This one is depricated, |
| but here anyway for compatability */ |
| #define TARGET_CDROMRESET 0x5312 /* hard-reset the drive */ |
| #define TARGET_CDROMVOLREAD 0x5313 /* Get the drive's volume setting |
| (struct cdrom_volctrl) */ |
| #define TARGET_CDROMREADRAW 0x5314 /* read data in raw mode (2352 Bytes) |
| (struct cdrom_read) */ |
| /* |
| * These ioctls are used only used in aztcd.c and optcd.c |
| */ |
| #define TARGET_CDROMREADCOOKED 0x5315 /* read data in cooked mode */ |
| #define TARGET_CDROMSEEK 0x5316 /* seek msf address */ |
| |
| /* |
| * This ioctl is only used by the scsi-cd driver. |
| It is for playing audio in logical block addressing mode. |
| */ |
| #define TARGET_CDROMPLAYBLK 0x5317 /* (struct cdrom_blk) */ |
| |
| /* |
| * These ioctls are only used in optcd.c |
| */ |
| #define TARGET_CDROMREADALL 0x5318 /* read all 2646 bytes */ |
| |
| /* |
| * These ioctls are (now) only in ide-cd.c for controlling |
| * drive spindown time. They should be implemented in the |
| * Uniform driver, via generic packet commands, GPCMD_MODE_SELECT_10, |
| * GPCMD_MODE_SENSE_10 and the GPMODE_POWER_PAGE... |
| * -Erik |
| */ |
| #define TARGET_CDROMGETSPINDOWN 0x531d |
| #define TARGET_CDROMSETSPINDOWN 0x531e |
| |
| /* |
| * These ioctls are implemented through the uniform CD-ROM driver |
| * They _will_ be adopted by all CD-ROM drivers, when all the CD-ROM |
| * drivers are eventually ported to the uniform CD-ROM driver interface. |
| */ |
| #define TARGET_CDROMCLOSETRAY 0x5319 /* pendant of CDROMEJECT */ |
| #define TARGET_CDROM_SET_OPTIONS 0x5320 /* Set behavior options */ |
| #define TARGET_CDROM_CLEAR_OPTIONS 0x5321 /* Clear behavior options */ |
| #define TARGET_CDROM_SELECT_SPEED 0x5322 /* Set the CD-ROM speed */ |
| #define TARGET_CDROM_SELECT_DISC 0x5323 /* Select disc (for juke-boxes) */ |
| #define TARGET_CDROM_MEDIA_CHANGED 0x5325 /* Check is media changed */ |
| #define TARGET_CDROM_DRIVE_STATUS 0x5326 /* Get tray position, etc. */ |
| #define TARGET_CDROM_DISC_STATUS 0x5327 /* Get disc type, etc. */ |
| #define TARGET_CDROM_CHANGER_NSLOTS 0x5328 /* Get number of slots */ |
| #define TARGET_CDROM_LOCKDOOR 0x5329 /* lock or unlock door */ |
| #define TARGET_CDROM_DEBUG 0x5330 /* Turn debug messages on/off */ |
| #define TARGET_CDROM_GET_CAPABILITY 0x5331 /* get capabilities */ |
| |
| /* Note that scsi/scsi_ioctl.h also uses 0x5382 - 0x5386. |
| * Future CDROM ioctls should be kept below 0x537F |
| */ |
| |
| /* This ioctl is only used by sbpcd at the moment */ |
| #define TARGET_CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */ |
| /* conflict with SCSI_IOCTL_GET_IDLUN */ |
| |
| /* DVD-ROM Specific ioctls */ |
| #define TARGET_DVD_READ_STRUCT 0x5390 /* Read structure */ |
| #define TARGET_DVD_WRITE_STRUCT 0x5391 /* Write structure */ |
| #define TARGET_DVD_AUTH 0x5392 /* Authentication */ |
| |
| #define TARGET_CDROM_SEND_PACKET 0x5393 /* send a packet to the drive */ |
| #define TARGET_CDROM_NEXT_WRITABLE 0x5394 /* get next writable block */ |
| #define TARGET_CDROM_LAST_WRITTEN 0x5395 /* get last block written on disc */ |
| |
| /* HD commands */ |
| |
| /* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x030n/0x031n */ |
| #define TARGET_HDIO_GETGEO 0x0301 /* get device geometry */ |
| #define TARGET_HDIO_GET_UNMASKINTR 0x0302 /* get current unmask setting */ |
| #define TARGET_HDIO_GET_MULTCOUNT 0x0304 /* get current IDE blockmode setting */ |
| #define TARGET_HDIO_GET_IDENTITY 0x0307 /* get IDE identification info */ |
| #define TARGET_HDIO_GET_KEEPSETTINGS 0x0308 /* get keep-settings-on-reset flag */ |
| #define TARGET_HDIO_GET_32BIT 0x0309 /* get current io_32bit setting */ |
| #define TARGET_HDIO_GET_NOWERR 0x030a /* get ignore-write-error flag */ |
| #define TARGET_HDIO_GET_DMA 0x030b /* get use-dma flag */ |
| #define TARGET_HDIO_DRIVE_CMD 0x031f /* execute a special drive command */ |
| |
| /* hd/ide ctl's that pass (arg) non-ptr values are numbered 0x032n/0x033n */ |
| #define TARGET_HDIO_SET_MULTCOUNT 0x0321 /* change IDE blockmode */ |
| #define TARGET_HDIO_SET_UNMASKINTR 0x0322 /* permit other irqs during I/O */ |
| #define TARGET_HDIO_SET_KEEPSETTINGS 0x0323 /* keep ioctl settings on reset */ |
| #define TARGET_HDIO_SET_32BIT 0x0324 /* change io_32bit flags */ |
| #define TARGET_HDIO_SET_NOWERR 0x0325 /* change ignore-write-error flag */ |
| #define TARGET_HDIO_SET_DMA 0x0326 /* change use-dma flag */ |
| #define TARGET_HDIO_SET_PIO_MODE 0x0327 /* reconfig interface to new speed */ |
