| /* |
| * QEMU Guest Agent win32-specific command implementations |
| * |
| * Copyright IBM Corp. 2012 |
| * |
| * Authors: |
| * Michael Roth <mdroth@linux.vnet.ibm.com> |
| * Gal Hammer <ghammer@redhat.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| */ |
| #include "qemu/osdep.h" |
| |
| #include <wtypes.h> |
| #include <powrprof.h> |
| #include <winsock2.h> |
| #include <ws2tcpip.h> |
| #include <iptypes.h> |
| #include <iphlpapi.h> |
| #include <winioctl.h> |
| #include <ntddscsi.h> |
| #include <setupapi.h> |
| #include <cfgmgr32.h> |
| #include <initguid.h> |
| #include <devpropdef.h> |
| #include <lm.h> |
| #include <wtsapi32.h> |
| #include <wininet.h> |
| |
| #include "guest-agent-core.h" |
| #include "vss-win32.h" |
| #include "qga-qapi-commands.h" |
| #include "qapi/error.h" |
| #include "qapi/qmp/qerror.h" |
| #include "qemu/queue.h" |
| #include "qemu/host-utils.h" |
| #include "qemu/base64.h" |
| #include "commands-common.h" |
| |
| /* |
| * The following should be in devpkey.h, but it isn't. The key names were |
| * prefixed to avoid (future) name clashes. Once the definitions get into |
| * mingw the following lines can be removed. |
| */ |
| DEFINE_DEVPROPKEY(qga_DEVPKEY_NAME, 0xb725f130, 0x47ef, 0x101a, 0xa5, |
| 0xf1, 0x02, 0x60, 0x8c, 0x9e, 0xeb, 0xac, 10); |
| /* DEVPROP_TYPE_STRING */ |
| DEFINE_DEVPROPKEY(qga_DEVPKEY_Device_HardwareIds, 0xa45c254e, 0xdf1c, |
| 0x4efd, 0x80, 0x20, 0x67, 0xd1, 0x46, 0xa8, 0x50, 0xe0, 3); |
| /* DEVPROP_TYPE_STRING_LIST */ |
| DEFINE_DEVPROPKEY(qga_DEVPKEY_Device_DriverDate, 0xa8b865dd, 0x2e3d, |
| 0x4094, 0xad, 0x97, 0xe5, 0x93, 0xa7, 0xc, 0x75, 0xd6, 2); |
| /* DEVPROP_TYPE_FILETIME */ |
| DEFINE_DEVPROPKEY(qga_DEVPKEY_Device_DriverVersion, 0xa8b865dd, 0x2e3d, |
| 0x4094, 0xad, 0x97, 0xe5, 0x93, 0xa7, 0xc, 0x75, 0xd6, 3); |
| /* DEVPROP_TYPE_STRING */ |
| /* The CM_Get_DevNode_PropertyW prototype is only sometimes in cfgmgr32.h */ |
| #ifndef CM_Get_DevNode_Property |
| #pragma GCC diagnostic push |
| #pragma GCC diagnostic ignored "-Wredundant-decls" |
| CMAPI CONFIGRET WINAPI CM_Get_DevNode_PropertyW( |
| DEVINST dnDevInst, |
| CONST DEVPROPKEY * PropertyKey, |
| DEVPROPTYPE * PropertyType, |
| PBYTE PropertyBuffer, |
| PULONG PropertyBufferSize, |
| ULONG ulFlags |
| ); |
| #define CM_Get_DevNode_Property CM_Get_DevNode_PropertyW |
| #pragma GCC diagnostic pop |
| #endif |
| |
| #ifndef SHTDN_REASON_FLAG_PLANNED |
| #define SHTDN_REASON_FLAG_PLANNED 0x80000000 |
| #endif |
| |
| /* multiple of 100 nanoseconds elapsed between windows baseline |
| * (1/1/1601) and Unix Epoch (1/1/1970), accounting for leap years */ |
| #define W32_FT_OFFSET (10000000ULL * 60 * 60 * 24 * \ |
| (365 * (1970 - 1601) + \ |
| (1970 - 1601) / 4 - 3)) |
| |
| #define INVALID_SET_FILE_POINTER ((DWORD)-1) |
| |
| struct GuestFileHandle { |
| int64_t id; |
| HANDLE fh; |
| QTAILQ_ENTRY(GuestFileHandle) next; |
| }; |
| |
| static struct { |
| QTAILQ_HEAD(, GuestFileHandle) filehandles; |
| } guest_file_state = { |
| .filehandles = QTAILQ_HEAD_INITIALIZER(guest_file_state.filehandles), |
| }; |
| |
| #define FILE_GENERIC_APPEND (FILE_GENERIC_WRITE & ~FILE_WRITE_DATA) |
| |
| typedef struct OpenFlags { |
| const char *forms; |
| DWORD desired_access; |
| DWORD creation_disposition; |
| } OpenFlags; |
| static OpenFlags guest_file_open_modes[] = { |
| {"r", GENERIC_READ, OPEN_EXISTING}, |
| {"rb", GENERIC_READ, OPEN_EXISTING}, |
| {"w", GENERIC_WRITE, CREATE_ALWAYS}, |
| {"wb", GENERIC_WRITE, CREATE_ALWAYS}, |
| {"a", FILE_GENERIC_APPEND, OPEN_ALWAYS }, |
| {"r+", GENERIC_WRITE | GENERIC_READ, OPEN_EXISTING}, |
| {"rb+", GENERIC_WRITE | GENERIC_READ, OPEN_EXISTING}, |
| {"r+b", GENERIC_WRITE | GENERIC_READ, OPEN_EXISTING}, |
| {"w+", GENERIC_WRITE | GENERIC_READ, CREATE_ALWAYS}, |
| {"wb+", GENERIC_WRITE | GENERIC_READ, CREATE_ALWAYS}, |
| {"w+b", GENERIC_WRITE | GENERIC_READ, CREATE_ALWAYS}, |
| {"a+", FILE_GENERIC_APPEND | GENERIC_READ, OPEN_ALWAYS }, |
| {"ab+", FILE_GENERIC_APPEND | GENERIC_READ, OPEN_ALWAYS }, |
| {"a+b", FILE_GENERIC_APPEND | GENERIC_READ, OPEN_ALWAYS } |
| }; |
| |
| #define debug_error(msg) do { \ |
| char *suffix = g_win32_error_message(GetLastError()); \ |
| g_debug("%s: %s", (msg), suffix); \ |
| g_free(suffix); \ |
| } while (0) |
| |
| static OpenFlags *find_open_flag(const char *mode_str) |
| { |
| int mode; |
| Error **errp = NULL; |
| |
| for (mode = 0; mode < ARRAY_SIZE(guest_file_open_modes); ++mode) { |
| OpenFlags *flags = guest_file_open_modes + mode; |
| |
| if (strcmp(flags->forms, mode_str) == 0) { |
| return flags; |
| } |
| } |
| |
| error_setg(errp, "invalid file open mode '%s'", mode_str); |
| return NULL; |
| } |
| |
| static int64_t guest_file_handle_add(HANDLE fh, Error **errp) |
| { |
| GuestFileHandle *gfh; |
| int64_t handle; |
| |
| handle = ga_get_fd_handle(ga_state, errp); |
| if (handle < 0) { |
| return -1; |
| } |
| gfh = g_new0(GuestFileHandle, 1); |
| gfh->id = handle; |
| gfh->fh = fh; |
| QTAILQ_INSERT_TAIL(&guest_file_state.filehandles, gfh, next); |
| |
| return handle; |
| } |
| |
| GuestFileHandle *guest_file_handle_find(int64_t id, Error **errp) |
| { |
| GuestFileHandle *gfh; |
| QTAILQ_FOREACH(gfh, &guest_file_state.filehandles, next) { |
| if (gfh->id == id) { |
| return gfh; |
| } |
| } |
| error_setg(errp, "handle '%" PRId64 "' has not been found", id); |
| return NULL; |
| } |
| |
| static void handle_set_nonblocking(HANDLE fh) |
| { |
| DWORD file_type, pipe_state; |
| file_type = GetFileType(fh); |
| if (file_type != FILE_TYPE_PIPE) { |
| return; |
| } |
| /* If file_type == FILE_TYPE_PIPE, according to MSDN |
| * the specified file is socket or named pipe */ |
| if (!GetNamedPipeHandleState(fh, &pipe_state, NULL, |
| NULL, NULL, NULL, 0)) { |
| return; |
| } |
| /* The fd is named pipe fd */ |
| if (pipe_state & PIPE_NOWAIT) { |
| return; |
| } |
| |
| pipe_state |= PIPE_NOWAIT; |
| SetNamedPipeHandleState(fh, &pipe_state, NULL, NULL); |
| } |
| |
| int64_t qmp_guest_file_open(const char *path, bool has_mode, |
| const char *mode, Error **errp) |
| { |
| int64_t fd = -1; |
| HANDLE fh; |
| HANDLE templ_file = NULL; |
| DWORD share_mode = FILE_SHARE_READ; |
| DWORD flags_and_attr = FILE_ATTRIBUTE_NORMAL; |
| LPSECURITY_ATTRIBUTES sa_attr = NULL; |
| OpenFlags *guest_flags; |
| GError *gerr = NULL; |
| wchar_t *w_path = NULL; |
| |
| if (!has_mode) { |
| mode = "r"; |
| } |
| slog("guest-file-open called, filepath: %s, mode: %s", path, mode); |
| guest_flags = find_open_flag(mode); |
| if (guest_flags == NULL) { |
| error_setg(errp, "invalid file open mode"); |
| goto done; |
| } |
| |
| w_path = g_utf8_to_utf16(path, -1, NULL, NULL, &gerr); |
| if (!w_path) { |
| goto done; |
| } |
| |
| fh = CreateFileW(w_path, guest_flags->desired_access, share_mode, sa_attr, |
| guest_flags->creation_disposition, flags_and_attr, |
| templ_file); |
| if (fh == INVALID_HANDLE_VALUE) { |
| error_setg_win32(errp, GetLastError(), "failed to open file '%s'", |
| path); |
| goto done; |
| } |
| |
| /* set fd non-blocking to avoid common use cases (like reading from a |
| * named pipe) from hanging the agent |
| */ |
| handle_set_nonblocking(fh); |
| |
| fd = guest_file_handle_add(fh, errp); |
| if (fd < 0) { |
| CloseHandle(fh); |
| error_setg(errp, "failed to add handle to qmp handle table"); |
| goto done; |
| } |
| |
| slog("guest-file-open, handle: % " PRId64, fd); |
| |
| done: |
| if (gerr) { |
| error_setg(errp, QERR_QGA_COMMAND_FAILED, gerr->message); |
| g_error_free(gerr); |
| } |
| g_free(w_path); |
| return fd; |
| } |
| |
| void qmp_guest_file_close(int64_t handle, Error **errp) |
| { |
| bool ret; |
| GuestFileHandle *gfh = guest_file_handle_find(handle, errp); |
| slog("guest-file-close called, handle: %" PRId64, handle); |
| if (gfh == NULL) { |
| return; |
| } |
| ret = CloseHandle(gfh->fh); |
| if (!ret) { |
| error_setg_win32(errp, GetLastError(), "failed close handle"); |
| return; |
| } |
| |
| QTAILQ_REMOVE(&guest_file_state.filehandles, gfh, next); |
| g_free(gfh); |
| } |
| |
| static void acquire_privilege(const char *name, Error **errp) |
| { |
| HANDLE token = NULL; |
| TOKEN_PRIVILEGES priv; |
| Error *local_err = NULL; |
| |
| if (OpenProcessToken(GetCurrentProcess(), |
| TOKEN_ADJUST_PRIVILEGES | TOKEN_QUERY, &token)) |
| { |
| if (!LookupPrivilegeValue(NULL, name, &priv.Privileges[0].Luid)) { |
| error_setg(&local_err, QERR_QGA_COMMAND_FAILED, |
| "no luid for requested privilege"); |
| goto out; |
| } |
| |
| priv.PrivilegeCount = 1; |
| priv.Privileges[0].Attributes = SE_PRIVILEGE_ENABLED; |
| |
| if (!AdjustTokenPrivileges(token, FALSE, &priv, 0, NULL, 0)) { |
| error_setg(&local_err, QERR_QGA_COMMAND_FAILED, |
| "unable to acquire requested privilege"); |
| goto out; |
| } |
| |
| } else { |
| error_setg(&local_err, QERR_QGA_COMMAND_FAILED, |
| "failed to open privilege token"); |
| } |
| |
| out: |
| if (token) { |
| CloseHandle(token); |
| } |
| error_propagate(errp, local_err); |
| } |
| |
| static void execute_async(DWORD WINAPI (*func)(LPVOID), LPVOID opaque, |
| Error **errp) |
| { |
| HANDLE thread = CreateThread(NULL, 0, func, opaque, 0, NULL); |
| if (!thread) { |
| error_setg(errp, QERR_QGA_COMMAND_FAILED, |
| "failed to dispatch asynchronous command"); |
| } |
| } |
| |
| void qmp_guest_shutdown(bool has_mode, const char *mode, Error **errp) |
| { |
| Error *local_err = NULL; |
| UINT shutdown_flag = EWX_FORCE; |
| |
| slog("guest-shutdown called, mode: %s", mode); |
| |
| if (!has_mode || strcmp(mode, "powerdown") == 0) { |
| shutdown_flag |= EWX_POWEROFF; |
| } else if (strcmp(mode, "halt") == 0) { |
| shutdown_flag |= EWX_SHUTDOWN; |
| } else if (strcmp(mode, "reboot") == 0) { |
| shutdown_flag |= EWX_REBOOT; |
| } else { |
| error_setg(errp, QERR_INVALID_PARAMETER_VALUE, "mode", |
| "'halt', 'powerdown', or 'reboot'"); |
| return; |
| } |
| |
| /* Request a shutdown privilege, but try to shut down the system |
| anyway. */ |
| acquire_privilege(SE_SHUTDOWN_NAME, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| |
| if (!ExitWindowsEx(shutdown_flag, SHTDN_REASON_FLAG_PLANNED)) { |
| g_autofree gchar *emsg = g_win32_error_message(GetLastError()); |
| slog("guest-shutdown failed: %s", emsg); |
| error_setg_win32(errp, GetLastError(), "guest-shutdown failed"); |
| } |
| } |
| |
| GuestFileRead *guest_file_read_unsafe(GuestFileHandle *gfh, |
| int64_t count, Error **errp) |
| { |
| GuestFileRead *read_data = NULL; |
| guchar *buf; |
| HANDLE fh = gfh->fh; |
| bool is_ok; |
| DWORD read_count; |
| |
| buf = g_malloc0(count + 1); |
| is_ok = ReadFile(fh, buf, count, &read_count, NULL); |
| if (!is_ok) { |
| error_setg_win32(errp, GetLastError(), "failed to read file"); |
| } else { |
| buf[read_count] = 0; |
| read_data = g_new0(GuestFileRead, 1); |
| read_data->count = (size_t)read_count; |
| read_data->eof = read_count == 0; |
| |
| if (read_count != 0) { |
| read_data->buf_b64 = g_base64_encode(buf, read_count); |
| } |
| } |
| g_free(buf); |
| |
| return read_data; |
| } |
| |
| GuestFileWrite *qmp_guest_file_write(int64_t handle, const char *buf_b64, |
| bool has_count, int64_t count, |
| Error **errp) |
| { |
| GuestFileWrite *write_data = NULL; |
| guchar *buf; |
| gsize buf_len; |
| bool is_ok; |
| DWORD write_count; |
| GuestFileHandle *gfh = guest_file_handle_find(handle, errp); |
| HANDLE fh; |
| |
| if (!gfh) { |
| return NULL; |
| } |
| fh = gfh->fh; |
| buf = qbase64_decode(buf_b64, -1, &buf_len, errp); |
| if (!buf) { |
| return NULL; |
| } |
| |
| if (!has_count) { |
| count = buf_len; |
| } else if (count < 0 || count > buf_len) { |
| error_setg(errp, "value '%" PRId64 |
| "' is invalid for argument count", count); |
| goto done; |
| } |
| |
| is_ok = WriteFile(fh, buf, count, &write_count, NULL); |
| if (!is_ok) { |
| error_setg_win32(errp, GetLastError(), "failed to write to file"); |
| slog("guest-file-write-failed, handle: %" PRId64, handle); |
| } else { |
| write_data = g_new0(GuestFileWrite, 1); |
| write_data->count = (size_t) write_count; |
| } |
| |
| done: |
| g_free(buf); |
| return write_data; |
| } |
| |
| GuestFileSeek *qmp_guest_file_seek(int64_t handle, int64_t offset, |
| GuestFileWhence *whence_code, |
| Error **errp) |
| { |
| GuestFileHandle *gfh; |
| GuestFileSeek *seek_data; |
| HANDLE fh; |
| LARGE_INTEGER new_pos, off_pos; |
| off_pos.QuadPart = offset; |
| BOOL res; |
| int whence; |
| Error *err = NULL; |
| |
| gfh = guest_file_handle_find(handle, errp); |
| if (!gfh) { |
| return NULL; |
| } |
| |
| /* We stupidly exposed 'whence':'int' in our qapi */ |
| whence = ga_parse_whence(whence_code, &err); |
| if (err) { |
| error_propagate(errp, err); |
| return NULL; |
| } |
| |
| fh = gfh->fh; |
| res = SetFilePointerEx(fh, off_pos, &new_pos, whence); |
| if (!res) { |
| error_setg_win32(errp, GetLastError(), "failed to seek file"); |
| return NULL; |
| } |
| seek_data = g_new0(GuestFileSeek, 1); |
| seek_data->position = new_pos.QuadPart; |
| return seek_data; |
| } |
| |
| void qmp_guest_file_flush(int64_t handle, Error **errp) |
| { |
| HANDLE fh; |
| GuestFileHandle *gfh = guest_file_handle_find(handle, errp); |
| if (!gfh) { |
| return; |
| } |
| |
| fh = gfh->fh; |
| if (!FlushFileBuffers(fh)) { |
| error_setg_win32(errp, GetLastError(), "failed to flush file"); |
| } |
| } |
| |
| static GuestDiskBusType win2qemu[] = { |
| [BusTypeUnknown] = GUEST_DISK_BUS_TYPE_UNKNOWN, |
| [BusTypeScsi] = GUEST_DISK_BUS_TYPE_SCSI, |
| [BusTypeAtapi] = GUEST_DISK_BUS_TYPE_IDE, |
| [BusTypeAta] = GUEST_DISK_BUS_TYPE_IDE, |
| [BusType1394] = GUEST_DISK_BUS_TYPE_IEEE1394, |
| [BusTypeSsa] = GUEST_DISK_BUS_TYPE_SSA, |
| [BusTypeFibre] = GUEST_DISK_BUS_TYPE_SSA, |
| [BusTypeUsb] = GUEST_DISK_BUS_TYPE_USB, |
| [BusTypeRAID] = GUEST_DISK_BUS_TYPE_RAID, |
| [BusTypeiScsi] = GUEST_DISK_BUS_TYPE_ISCSI, |
| [BusTypeSas] = GUEST_DISK_BUS_TYPE_SAS, |
| [BusTypeSata] = GUEST_DISK_BUS_TYPE_SATA, |
| [BusTypeSd] = GUEST_DISK_BUS_TYPE_SD, |
| [BusTypeMmc] = GUEST_DISK_BUS_TYPE_MMC, |
| #if (_WIN32_WINNT >= 0x0601) |
| [BusTypeVirtual] = GUEST_DISK_BUS_TYPE_VIRTUAL, |
| [BusTypeFileBackedVirtual] = GUEST_DISK_BUS_TYPE_FILE_BACKED_VIRTUAL, |
| #endif |
| }; |
| |
| static GuestDiskBusType find_bus_type(STORAGE_BUS_TYPE bus) |
| { |
| if (bus >= ARRAY_SIZE(win2qemu) || (int)bus < 0) { |
| return GUEST_DISK_BUS_TYPE_UNKNOWN; |
| } |
| return win2qemu[(int)bus]; |
| } |
| |
| DEFINE_GUID(GUID_DEVINTERFACE_DISK, |
| 0x53f56307L, 0xb6bf, 0x11d0, 0x94, 0xf2, |
| 0x00, 0xa0, 0xc9, 0x1e, 0xfb, 0x8b); |
| DEFINE_GUID(GUID_DEVINTERFACE_STORAGEPORT, |
| 0x2accfe60L, 0xc130, 0x11d2, 0xb0, 0x82, |
| 0x00, 0xa0, 0xc9, 0x1e, 0xfb, 0x8b); |
| |
| static void get_pci_address_for_device(GuestPCIAddress *pci, |
| HDEVINFO dev_info) |
| { |
| SP_DEVINFO_DATA dev_info_data; |
| DWORD j; |
| DWORD size; |
| bool partial_pci = false; |
| |
| dev_info_data.cbSize = sizeof(SP_DEVINFO_DATA); |
| |
| for (j = 0; |
| SetupDiEnumDeviceInfo(dev_info, j, &dev_info_data); |
| j++) { |
| DWORD addr, bus, ui_slot, type; |
| int func, slot; |
| size = sizeof(DWORD); |
| |
| /* |
| * There is no need to allocate buffer in the next functions. The |
| * size is known and ULONG according to |
| * https://msdn.microsoft.com/en-us/library/windows/hardware/ff543095(v=vs.85).aspx |
| */ |
| if (!SetupDiGetDeviceRegistryProperty( |
| dev_info, &dev_info_data, SPDRP_BUSNUMBER, |
| &type, (PBYTE)&bus, size, NULL)) { |
| debug_error("failed to get PCI bus"); |
| bus = -1; |
| partial_pci = true; |
| } |
| |
| /* |
| * The function retrieves the device's address. This value will be |
| * transformed into device function and number |
| */ |
| if (!SetupDiGetDeviceRegistryProperty( |
| dev_info, &dev_info_data, SPDRP_ADDRESS, |
| &type, (PBYTE)&addr, size, NULL)) { |
| debug_error("failed to get PCI address"); |
| addr = -1; |
| partial_pci = true; |
| } |
| |
| /* |
| * This call returns UINumber of DEVICE_CAPABILITIES structure. |
| * This number is typically a user-perceived slot number. |
| */ |
| if (!SetupDiGetDeviceRegistryProperty( |
| dev_info, &dev_info_data, SPDRP_UI_NUMBER, |
| &type, (PBYTE)&ui_slot, size, NULL)) { |
| debug_error("failed to get PCI slot"); |
| ui_slot = -1; |
| partial_pci = true; |
| } |
| |
| /* |
| * SetupApi gives us the same information as driver with |
| * IoGetDeviceProperty. According to Microsoft: |
| * |
| * FunctionNumber = (USHORT)((propertyAddress) & 0x0000FFFF) |
| * DeviceNumber = (USHORT)(((propertyAddress) >> 16) & 0x0000FFFF) |
| * SPDRP_ADDRESS is propertyAddress, so we do the same. |
| * |
| * https://docs.microsoft.com/en-us/windows/desktop/api/setupapi/nf-setupapi-setupdigetdeviceregistrypropertya |
| */ |
| if (partial_pci) { |
| pci->domain = -1; |
| pci->slot = -1; |
| pci->function = -1; |
| pci->bus = -1; |
| continue; |
| } else { |
| func = ((int)addr == -1) ? -1 : addr & 0x0000FFFF; |
| slot = ((int)addr == -1) ? -1 : (addr >> 16) & 0x0000FFFF; |
| if ((int)ui_slot != slot) { |
| g_debug("mismatch with reported slot values: %d vs %d", |
| (int)ui_slot, slot); |
| } |
| pci->domain = 0; |
| pci->slot = (int)ui_slot; |
| pci->function = func; |
| pci->bus = (int)bus; |
| return; |
| } |
| } |
| } |
| |
| static GuestPCIAddress *get_pci_info(int number, Error **errp) |
| { |
| HDEVINFO dev_info = INVALID_HANDLE_VALUE; |
| HDEVINFO parent_dev_info = INVALID_HANDLE_VALUE; |
| |
| SP_DEVINFO_DATA dev_info_data; |
| SP_DEVICE_INTERFACE_DATA dev_iface_data; |
| HANDLE dev_file; |
| int i; |
| GuestPCIAddress *pci = NULL; |
| |
| pci = g_malloc0(sizeof(*pci)); |
| pci->domain = -1; |
| pci->slot = -1; |
| pci->function = -1; |
| pci->bus = -1; |
| |
| dev_info = SetupDiGetClassDevs(&GUID_DEVINTERFACE_DISK, 0, 0, |
| DIGCF_PRESENT | DIGCF_DEVICEINTERFACE); |
| if (dev_info == INVALID_HANDLE_VALUE) { |
| error_setg_win32(errp, GetLastError(), "failed to get devices tree"); |
| goto end; |
| } |
| |
| g_debug("enumerating devices"); |
| dev_info_data.cbSize = sizeof(SP_DEVINFO_DATA); |
| dev_iface_data.cbSize = sizeof(SP_DEVICE_INTERFACE_DATA); |
| for (i = 0; SetupDiEnumDeviceInfo(dev_info, i, &dev_info_data); i++) { |
| g_autofree PSP_DEVICE_INTERFACE_DETAIL_DATA pdev_iface_detail_data = NULL; |
| STORAGE_DEVICE_NUMBER sdn; |
| g_autofree char *parent_dev_id = NULL; |
| SP_DEVINFO_DATA parent_dev_info_data; |
| DWORD size = 0; |
| |
| g_debug("getting device path"); |
| if (SetupDiEnumDeviceInterfaces(dev_info, &dev_info_data, |
| &GUID_DEVINTERFACE_DISK, 0, |
| &dev_iface_data)) { |
| if (!SetupDiGetDeviceInterfaceDetail(dev_info, &dev_iface_data, |
| pdev_iface_detail_data, |
| size, &size, |
| &dev_info_data)) { |
| if (GetLastError() == ERROR_INSUFFICIENT_BUFFER) { |
| pdev_iface_detail_data = g_malloc(size); |
| pdev_iface_detail_data->cbSize = |
| sizeof(*pdev_iface_detail_data); |
| } else { |
| error_setg_win32(errp, GetLastError(), |
| "failed to get device interfaces"); |
| goto end; |
| } |
| } |
| |
| if (!SetupDiGetDeviceInterfaceDetail(dev_info, &dev_iface_data, |
| pdev_iface_detail_data, |
| size, &size, |
| &dev_info_data)) { |
| // pdev_iface_detail_data already is allocated |
| error_setg_win32(errp, GetLastError(), |
| "failed to get device interfaces"); |
| goto end; |
| } |
| |
| dev_file = CreateFile(pdev_iface_detail_data->DevicePath, 0, |
| FILE_SHARE_READ, NULL, OPEN_EXISTING, 0, |
| NULL); |
| |
| if (!DeviceIoControl(dev_file, IOCTL_STORAGE_GET_DEVICE_NUMBER, |
| NULL, 0, &sdn, sizeof(sdn), &size, NULL)) { |
| CloseHandle(dev_file); |
| error_setg_win32(errp, GetLastError(), |
| "failed to get device slot number"); |
| goto end; |
| } |
| |
| CloseHandle(dev_file); |
| if (sdn.DeviceNumber != number) { |
| continue; |
| } |
| } else { |
| error_setg_win32(errp, GetLastError(), |
| "failed to get device interfaces"); |
| goto end; |
| } |
| |
| g_debug("found device slot %d. Getting storage controller", number); |
| { |
| CONFIGRET cr; |
| DEVINST dev_inst, parent_dev_inst; |
| ULONG dev_id_size = 0; |
| |
| size = 0; |
| if (!SetupDiGetDeviceInstanceId(dev_info, &dev_info_data, |
| parent_dev_id, size, &size)) { |
| if (GetLastError() == ERROR_INSUFFICIENT_BUFFER) { |
| parent_dev_id = g_malloc(size); |
| } else { |
| error_setg_win32(errp, GetLastError(), |
| "failed to get device instance ID"); |
| goto end; |
| } |
| } |
| |
| if (!SetupDiGetDeviceInstanceId(dev_info, &dev_info_data, |
| parent_dev_id, size, &size)) { |
| // parent_dev_id already is allocated |
| error_setg_win32(errp, GetLastError(), |
| "failed to get device instance ID"); |
| goto end; |
| } |
| |
| /* |
| * CM API used here as opposed to |
| * SetupDiGetDeviceProperty(..., DEVPKEY_Device_Parent, ...) |
| * which exports are only available in mingw-w64 6+ |
| */ |
| cr = CM_Locate_DevInst(&dev_inst, parent_dev_id, 0); |
| if (cr != CR_SUCCESS) { |
| g_error("CM_Locate_DevInst failed with code %lx", cr); |
| error_setg_win32(errp, GetLastError(), |
| "failed to get device instance"); |
| goto end; |
| } |
| cr = CM_Get_Parent(&parent_dev_inst, dev_inst, 0); |
| if (cr != CR_SUCCESS) { |
| g_error("CM_Get_Parent failed with code %lx", cr); |
| error_setg_win32(errp, GetLastError(), |
| "failed to get parent device instance"); |
| goto end; |
| } |
| |
| cr = CM_Get_Device_ID_Size(&dev_id_size, parent_dev_inst, 0); |
| if (cr != CR_SUCCESS) { |
| g_error("CM_Get_Device_ID_Size failed with code %lx", cr); |
| error_setg_win32(errp, GetLastError(), |
| "failed to get parent device ID length"); |
| goto end; |
| } |
| |
| ++dev_id_size; |
| if (dev_id_size > size) { |
| g_free(parent_dev_id); |
| parent_dev_id = g_malloc(dev_id_size); |
| } |
| |
| cr = CM_Get_Device_ID(parent_dev_inst, parent_dev_id, dev_id_size, |
| 0); |
| if (cr != CR_SUCCESS) { |
| g_error("CM_Get_Device_ID failed with code %lx", cr); |
| error_setg_win32(errp, GetLastError(), |
| "failed to get parent device ID"); |
| goto end; |
| } |
| } |
| |
| g_debug("querying storage controller %s for PCI information", |
| parent_dev_id); |
| parent_dev_info = |
| SetupDiGetClassDevs(&GUID_DEVINTERFACE_STORAGEPORT, parent_dev_id, |
| NULL, DIGCF_PRESENT | DIGCF_DEVICEINTERFACE); |
| |
| if (parent_dev_info == INVALID_HANDLE_VALUE) { |
| error_setg_win32(errp, GetLastError(), |
| "failed to get parent device"); |
| goto end; |
| } |
| |
| parent_dev_info_data.cbSize = sizeof(SP_DEVINFO_DATA); |
| if (!SetupDiEnumDeviceInfo(parent_dev_info, 0, &parent_dev_info_data)) { |
| error_setg_win32(errp, GetLastError(), |
| "failed to get parent device data"); |
| goto end; |
| } |
| |
| get_pci_address_for_device(pci, parent_dev_info); |
| |
| break; |
| } |
| |
| end: |
| if (parent_dev_info != INVALID_HANDLE_VALUE) { |
| SetupDiDestroyDeviceInfoList(parent_dev_info); |
| } |
| if (dev_info != INVALID_HANDLE_VALUE) { |
| SetupDiDestroyDeviceInfoList(dev_info); |
| } |
| return pci; |
| } |
| |
| static void get_disk_properties(HANDLE vol_h, GuestDiskAddress *disk, |
| Error **errp) |
| { |
| STORAGE_PROPERTY_QUERY query; |
| STORAGE_DEVICE_DESCRIPTOR *dev_desc, buf; |
| DWORD received; |
| ULONG size = sizeof(buf); |
| |
| dev_desc = &buf; |
| query.PropertyId = StorageDeviceProperty; |
| query.QueryType = PropertyStandardQuery; |
| |
| if (!DeviceIoControl(vol_h, IOCTL_STORAGE_QUERY_PROPERTY, &query, |
| sizeof(STORAGE_PROPERTY_QUERY), dev_desc, |
| size, &received, NULL)) { |
| error_setg_win32(errp, GetLastError(), "failed to get bus type"); |
| return; |
| } |
| disk->bus_type = find_bus_type(dev_desc->BusType); |
| g_debug("bus type %d", disk->bus_type); |
| |
| /* Query once more. Now with long enough buffer. */ |
| size = dev_desc->Size; |
| dev_desc = g_malloc0(size); |
| if (!DeviceIoControl(vol_h, IOCTL_STORAGE_QUERY_PROPERTY, &query, |
| sizeof(STORAGE_PROPERTY_QUERY), dev_desc, |
| size, &received, NULL)) { |
| error_setg_win32(errp, GetLastError(), "failed to get serial number"); |
| g_debug("failed to get serial number"); |
| goto out_free; |
| } |
| if (dev_desc->SerialNumberOffset > 0) { |
| const char *serial; |
| size_t len; |
| |
| if (dev_desc->SerialNumberOffset >= received) { |
| error_setg(errp, "failed to get serial number: offset outside the buffer"); |
| g_debug("serial number offset outside the buffer"); |
| goto out_free; |
| } |
| serial = (char *)dev_desc + dev_desc->SerialNumberOffset; |
| len = received - dev_desc->SerialNumberOffset; |
| g_debug("serial number \"%s\"", serial); |
| if (*serial != 0) { |
| disk->serial = g_strndup(serial, len); |
| disk->has_serial = true; |
| } |
| } |
| out_free: |
| g_free(dev_desc); |
| |
| return; |
| } |
| |
| static void get_single_disk_info(int disk_number, |
| GuestDiskAddress *disk, Error **errp) |
| { |
| SCSI_ADDRESS addr, *scsi_ad; |
| DWORD len; |
| HANDLE disk_h; |
| Error *local_err = NULL; |
| |
| scsi_ad = &addr; |
| |
| g_debug("getting disk info for: %s", disk->dev); |
| disk_h = CreateFile(disk->dev, 0, FILE_SHARE_READ, NULL, OPEN_EXISTING, |
| 0, NULL); |
| if (disk_h == INVALID_HANDLE_VALUE) { |
| error_setg_win32(errp, GetLastError(), "failed to open disk"); |
| return; |
| } |
| |
| get_disk_properties(disk_h, disk, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| goto err_close; |
| } |
| |
| g_debug("bus type %d", disk->bus_type); |
| /* always set pci_controller as required by schema. get_pci_info() should |
| * report -1 values for non-PCI buses rather than fail. fail the command |
| * if that doesn't hold since that suggests some other unexpected |
| * breakage |
| */ |
| disk->pci_controller = get_pci_info(disk_number, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| goto err_close; |
| } |
| if (disk->bus_type == GUEST_DISK_BUS_TYPE_SCSI |
| || disk->bus_type == GUEST_DISK_BUS_TYPE_IDE |
| || disk->bus_type == GUEST_DISK_BUS_TYPE_RAID |
| /* This bus type is not supported before Windows Server 2003 SP1 */ |
| || disk->bus_type == GUEST_DISK_BUS_TYPE_SAS |
| ) { |
| /* We are able to use the same ioctls for different bus types |
| * according to Microsoft docs |
| * https://technet.microsoft.com/en-us/library/ee851589(v=ws.10).aspx */ |
| g_debug("getting SCSI info"); |
| if (DeviceIoControl(disk_h, IOCTL_SCSI_GET_ADDRESS, NULL, 0, scsi_ad, |
| sizeof(SCSI_ADDRESS), &len, NULL)) { |
| disk->unit = addr.Lun; |
| disk->target = addr.TargetId; |
| disk->bus = addr.PathId; |
| } |
| /* We do not set error in this case, because we still have enough |
| * information about volume. */ |
| } |
| |
| err_close: |
| CloseHandle(disk_h); |
| return; |
| } |
| |
| /* VSS provider works with volumes, thus there is no difference if |
| * the volume consist of spanned disks. Info about the first disk in the |
| * volume is returned for the spanned disk group (LVM) */ |
| static GuestDiskAddressList *build_guest_disk_info(char *guid, Error **errp) |
| { |
| Error *local_err = NULL; |
| GuestDiskAddressList *list = NULL; |
| GuestDiskAddress *disk = NULL; |
| int i; |
| HANDLE vol_h; |
| DWORD size; |
| PVOLUME_DISK_EXTENTS extents = NULL; |
| |
| /* strip final backslash */ |
| char *name = g_strdup(guid); |
| if (g_str_has_suffix(name, "\\")) { |
| name[strlen(name) - 1] = 0; |
| } |
| |
| g_debug("opening %s", name); |
| vol_h = CreateFile(name, 0, FILE_SHARE_READ, NULL, OPEN_EXISTING, |
| 0, NULL); |
| if (vol_h == INVALID_HANDLE_VALUE) { |
| error_setg_win32(errp, GetLastError(), "failed to open volume"); |
| goto out; |
| } |
| |
| /* Get list of extents */ |
| g_debug("getting disk extents"); |
| size = sizeof(VOLUME_DISK_EXTENTS); |
| extents = g_malloc0(size); |
| if (!DeviceIoControl(vol_h, IOCTL_VOLUME_GET_VOLUME_DISK_EXTENTS, NULL, |
| 0, extents, size, &size, NULL)) { |
| DWORD last_err = GetLastError(); |
| if (last_err == ERROR_MORE_DATA) { |
| /* Try once more with big enough buffer */ |
| g_free(extents); |
| extents = g_malloc0(size); |
| if (!DeviceIoControl( |
| vol_h, IOCTL_VOLUME_GET_VOLUME_DISK_EXTENTS, NULL, |
| 0, extents, size, NULL, NULL)) { |
| error_setg_win32(errp, GetLastError(), |
| "failed to get disk extents"); |
| goto out; |
| } |
| } else if (last_err == ERROR_INVALID_FUNCTION) { |
| /* Possibly CD-ROM or a shared drive. Try to pass the volume */ |
| g_debug("volume not on disk"); |
| disk = g_new0(GuestDiskAddress, 1); |
| disk->has_dev = true; |
| disk->dev = g_strdup(name); |
| get_single_disk_info(0xffffffff, disk, &local_err); |
| if (local_err) { |
| g_debug("failed to get disk info, ignoring error: %s", |
| error_get_pretty(local_err)); |
| error_free(local_err); |
| goto out; |
| } |
| QAPI_LIST_PREPEND(list, disk); |
| disk = NULL; |
| goto out; |
| } else { |
| error_setg_win32(errp, GetLastError(), |
| "failed to get disk extents"); |
| goto out; |
| } |
| } |
| g_debug("Number of extents: %lu", extents->NumberOfDiskExtents); |
| |
| /* Go through each extent */ |
| for (i = 0; i < extents->NumberOfDiskExtents; i++) { |
| disk = g_new0(GuestDiskAddress, 1); |
| |
| /* Disk numbers directly correspond to numbers used in UNCs |
| * |
| * See documentation for DISK_EXTENT: |
| * https://docs.microsoft.com/en-us/windows/desktop/api/winioctl/ns-winioctl-_disk_extent |
| * |
| * See also Naming Files, Paths and Namespaces: |
| * https://docs.microsoft.com/en-us/windows/desktop/FileIO/naming-a-file#win32-device-namespaces |
| */ |
| disk->has_dev = true; |
| disk->dev = g_strdup_printf("\\\\.\\PhysicalDrive%lu", |
| extents->Extents[i].DiskNumber); |
| |
| get_single_disk_info(extents->Extents[i].DiskNumber, disk, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| goto out; |
| } |
| QAPI_LIST_PREPEND(list, disk); |
| disk = NULL; |
| } |
| |
| |
| out: |
| if (vol_h != INVALID_HANDLE_VALUE) { |
| CloseHandle(vol_h); |
| } |
| qapi_free_GuestDiskAddress(disk); |
| g_free(extents); |
| g_free(name); |
| |
| return list; |
| } |
| |
| GuestDiskInfoList *qmp_guest_get_disks(Error **errp) |
| { |
| GuestDiskInfoList *ret = NULL; |
| HDEVINFO dev_info; |
| SP_DEVICE_INTERFACE_DATA dev_iface_data; |
| int i; |
| |
| dev_info = SetupDiGetClassDevs(&GUID_DEVINTERFACE_DISK, 0, 0, |
| DIGCF_PRESENT | DIGCF_DEVICEINTERFACE); |
| if (dev_info == INVALID_HANDLE_VALUE) { |
| error_setg_win32(errp, GetLastError(), "failed to get device tree"); |
| return NULL; |
| } |
| |
| g_debug("enumerating devices"); |
| dev_iface_data.cbSize = sizeof(SP_DEVICE_INTERFACE_DATA); |
| for (i = 0; |
| SetupDiEnumDeviceInterfaces(dev_info, NULL, &GUID_DEVINTERFACE_DISK, |
| i, &dev_iface_data); |
| i++) { |
| GuestDiskAddress *address = NULL; |
| GuestDiskInfo *disk = NULL; |
| Error *local_err = NULL; |
| g_autofree PSP_DEVICE_INTERFACE_DETAIL_DATA |
| pdev_iface_detail_data = NULL; |
| STORAGE_DEVICE_NUMBER sdn; |
| HANDLE dev_file; |
| DWORD size = 0; |
| BOOL result; |
| int attempt; |
| |
| g_debug(" getting device path"); |
| for (attempt = 0, result = FALSE; attempt < 2 && !result; attempt++) { |
| result = SetupDiGetDeviceInterfaceDetail(dev_info, |
| &dev_iface_data, pdev_iface_detail_data, size, &size, NULL); |
| if (result) { |
| break; |
| } |
| if (GetLastError() == ERROR_INSUFFICIENT_BUFFER) { |
| pdev_iface_detail_data = g_realloc(pdev_iface_detail_data, |
| size); |
| pdev_iface_detail_data->cbSize = |
| sizeof(*pdev_iface_detail_data); |
| } else { |
| g_debug("failed to get device interface details"); |
| break; |
| } |
| } |
| if (!result) { |
| g_debug("skipping device"); |
| continue; |
| } |
| |
| g_debug(" device: %s", pdev_iface_detail_data->DevicePath); |
| dev_file = CreateFile(pdev_iface_detail_data->DevicePath, 0, |
| FILE_SHARE_READ, NULL, OPEN_EXISTING, 0, NULL); |
| if (!DeviceIoControl(dev_file, IOCTL_STORAGE_GET_DEVICE_NUMBER, |
| NULL, 0, &sdn, sizeof(sdn), &size, NULL)) { |
| CloseHandle(dev_file); |
| debug_error("failed to get storage device number"); |
| continue; |
| } |
| CloseHandle(dev_file); |
| |
| disk = g_new0(GuestDiskInfo, 1); |
| disk->name = g_strdup_printf("\\\\.\\PhysicalDrive%lu", |
| sdn.DeviceNumber); |
| |
| g_debug(" number: %lu", sdn.DeviceNumber); |
| address = g_new0(GuestDiskAddress, 1); |
| address->has_dev = true; |
| address->dev = g_strdup(disk->name); |
| get_single_disk_info(sdn.DeviceNumber, address, &local_err); |
| if (local_err) { |
| g_debug("failed to get disk info: %s", |
| error_get_pretty(local_err)); |
| error_free(local_err); |
| qapi_free_GuestDiskAddress(address); |
| address = NULL; |
| } else { |
| disk->address = address; |
| disk->has_address = true; |
| } |
| |
| QAPI_LIST_PREPEND(ret, disk); |
| } |
| |
| SetupDiDestroyDeviceInfoList(dev_info); |
| return ret; |
| } |
| |
| static GuestFilesystemInfo *build_guest_fsinfo(char *guid, Error **errp) |
| { |
| DWORD info_size; |
| char mnt, *mnt_point; |
| wchar_t wfs_name[32]; |
| char fs_name[32]; |
| wchar_t vol_info[MAX_PATH + 1]; |
| size_t len; |
| uint64_t i64FreeBytesToCaller, i64TotalBytes, i64FreeBytes; |
| GuestFilesystemInfo *fs = NULL; |
| HANDLE hLocalDiskHandle = INVALID_HANDLE_VALUE; |
| |
| GetVolumePathNamesForVolumeName(guid, (LPCH)&mnt, 0, &info_size); |
| if (GetLastError() != ERROR_MORE_DATA) { |
| error_setg_win32(errp, GetLastError(), "failed to get volume name"); |
| return NULL; |
| } |
| |
| mnt_point = g_malloc(info_size + 1); |
| if (!GetVolumePathNamesForVolumeName(guid, mnt_point, info_size, |
| &info_size)) { |
| error_setg_win32(errp, GetLastError(), "failed to get volume name"); |
| goto free; |
| } |
| |
| hLocalDiskHandle = CreateFile(guid, 0 , 0, NULL, OPEN_EXISTING, |
| FILE_ATTRIBUTE_NORMAL | |
| FILE_FLAG_BACKUP_SEMANTICS, NULL); |
| if (INVALID_HANDLE_VALUE == hLocalDiskHandle) { |
| error_setg_win32(errp, GetLastError(), "failed to get handle for volume"); |
| goto free; |
| } |
| |
| len = strlen(mnt_point); |
| mnt_point[len] = '\\'; |
| mnt_point[len + 1] = 0; |
| |
| if (!GetVolumeInformationByHandleW(hLocalDiskHandle, vol_info, |
| sizeof(vol_info), NULL, NULL, NULL, |
| (LPWSTR) & wfs_name, sizeof(wfs_name))) { |
| if (GetLastError() != ERROR_NOT_READY) { |
| error_setg_win32(errp, GetLastError(), "failed to get volume info"); |
| } |
| goto free; |
| } |
| |
| fs = g_malloc(sizeof(*fs)); |
| fs->name = g_strdup(guid); |
| fs->has_total_bytes = false; |
| fs->has_used_bytes = false; |
| if (len == 0) { |
| fs->mountpoint = g_strdup("System Reserved"); |
| } else { |
| fs->mountpoint = g_strndup(mnt_point, len); |
| if (GetDiskFreeSpaceEx(fs->mountpoint, |
| (PULARGE_INTEGER) & i64FreeBytesToCaller, |
| (PULARGE_INTEGER) & i64TotalBytes, |
| (PULARGE_INTEGER) & i64FreeBytes)) { |
| fs->used_bytes = i64TotalBytes - i64FreeBytes; |
| fs->total_bytes = i64TotalBytes; |
| fs->has_total_bytes = true; |
| fs->has_used_bytes = true; |
| } |
| } |
| wcstombs(fs_name, wfs_name, sizeof(wfs_name)); |
| fs->type = g_strdup(fs_name); |
| fs->disk = build_guest_disk_info(guid, errp); |
| free: |
| if (hLocalDiskHandle != INVALID_HANDLE_VALUE) { |
| CloseHandle(hLocalDiskHandle); |
| } |
| g_free(mnt_point); |
| return fs; |
| } |
| |
| GuestFilesystemInfoList *qmp_guest_get_fsinfo(Error **errp) |
| { |
| HANDLE vol_h; |
| GuestFilesystemInfoList *ret = NULL; |
| char guid[256]; |
| |
| vol_h = FindFirstVolume(guid, sizeof(guid)); |
| if (vol_h == INVALID_HANDLE_VALUE) { |
| error_setg_win32(errp, GetLastError(), "failed to find any volume"); |
| return NULL; |
| } |
| |
| do { |
| Error *local_err = NULL; |
| GuestFilesystemInfo *info = build_guest_fsinfo(guid, &local_err); |
| if (local_err) { |
| g_debug("failed to get filesystem info, ignoring error: %s", |
| error_get_pretty(local_err)); |
| error_free(local_err); |
| continue; |
| } |
| QAPI_LIST_PREPEND(ret, info); |
| } while (FindNextVolume(vol_h, guid, sizeof(guid))); |
| |
| if (GetLastError() != ERROR_NO_MORE_FILES) { |
| error_setg_win32(errp, GetLastError(), "failed to find next volume"); |
| } |
| |
| FindVolumeClose(vol_h); |
| return ret; |
| } |
| |
| /* |
| * Return status of freeze/thaw |
| */ |
| GuestFsfreezeStatus qmp_guest_fsfreeze_status(Error **errp) |
| { |
| if (!vss_initialized()) { |
| error_setg(errp, QERR_UNSUPPORTED); |
| return 0; |
| } |
| |
| if (ga_is_frozen(ga_state)) { |
| return GUEST_FSFREEZE_STATUS_FROZEN; |
| } |
| |
| return GUEST_FSFREEZE_STATUS_THAWED; |
| } |
| |
| /* |
| * Freeze local file systems using Volume Shadow-copy Service. |
| * The frozen state is limited for up to 10 seconds by VSS. |
| */ |
| int64_t qmp_guest_fsfreeze_freeze(Error **errp) |
| { |
| return qmp_guest_fsfreeze_freeze_list(false, NULL, errp); |
| } |
| |
| int64_t qmp_guest_fsfreeze_freeze_list(bool has_mountpoints, |
| strList *mountpoints, |
| Error **errp) |
| { |
| int i; |
| Error *local_err = NULL; |
| |
| if (!vss_initialized()) { |
| error_setg(errp, QERR_UNSUPPORTED); |
| return 0; |
| } |
| |
| slog("guest-fsfreeze called"); |
| |
| /* cannot risk guest agent blocking itself on a write in this state */ |
| ga_set_frozen(ga_state); |
| |
| qga_vss_fsfreeze(&i, true, mountpoints, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| goto error; |
| } |
| |
| return i; |
| |
| error: |
| local_err = NULL; |
| qmp_guest_fsfreeze_thaw(&local_err); |
| if (local_err) { |
| g_debug("cleanup thaw: %s", error_get_pretty(local_err)); |
| error_free(local_err); |
| } |
| return 0; |
| } |
| |
| /* |
| * Thaw local file systems using Volume Shadow-copy Service. |
| */ |
| int64_t qmp_guest_fsfreeze_thaw(Error **errp) |
| { |
| int i; |
| |
| if (!vss_initialized()) { |
| error_setg(errp, QERR_UNSUPPORTED); |
| return 0; |
| } |
| |
| qga_vss_fsfreeze(&i, false, NULL, errp); |
| |
| ga_unset_frozen(ga_state); |
| return i; |
| } |
| |
| static void guest_fsfreeze_cleanup(void) |
| { |
| Error *err = NULL; |
| |
| if (!vss_initialized()) { |
| return; |
| } |
| |
| if (ga_is_frozen(ga_state) == GUEST_FSFREEZE_STATUS_FROZEN) { |
| qmp_guest_fsfreeze_thaw(&err); |
| if (err) { |
| slog("failed to clean up frozen filesystems: %s", |
| error_get_pretty(err)); |
| error_free(err); |
| } |
| } |
| |
| vss_deinit(true); |
| } |
| |
| /* |
| * Walk list of mounted file systems in the guest, and discard unused |
| * areas. |
| */ |
| GuestFilesystemTrimResponse * |
| qmp_guest_fstrim(bool has_minimum, int64_t minimum, Error **errp) |
| { |
| GuestFilesystemTrimResponse *resp; |
| HANDLE handle; |
| WCHAR guid[MAX_PATH] = L""; |
| OSVERSIONINFO osvi; |
| BOOL win8_or_later; |
| |
| ZeroMemory(&osvi, sizeof(OSVERSIONINFO)); |
| osvi.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); |
| GetVersionEx(&osvi); |
| win8_or_later = (osvi.dwMajorVersion > 6 || |
| ((osvi.dwMajorVersion == 6) && |
| (osvi.dwMinorVersion >= 2))); |
| if (!win8_or_later) { |
| error_setg(errp, "fstrim is only supported for Win8+"); |
| return NULL; |
| } |
| |
| handle = FindFirstVolumeW(guid, ARRAYSIZE(guid)); |
| if (handle == INVALID_HANDLE_VALUE) { |
| error_setg_win32(errp, GetLastError(), "failed to find any volume"); |
| return NULL; |
| } |
| |
| resp = g_new0(GuestFilesystemTrimResponse, 1); |
| |
| do { |
| GuestFilesystemTrimResult *res; |
| PWCHAR uc_path; |
| DWORD char_count = 0; |
| char *path, *out; |
| GError *gerr = NULL; |
| gchar *argv[4]; |
| |
| GetVolumePathNamesForVolumeNameW(guid, NULL, 0, &char_count); |
| |
| if (GetLastError() != ERROR_MORE_DATA) { |
| continue; |
| } |
| if (GetDriveTypeW(guid) != DRIVE_FIXED) { |
| continue; |
| } |
| |
| uc_path = g_new(WCHAR, char_count); |
| if (!GetVolumePathNamesForVolumeNameW(guid, uc_path, char_count, |
| &char_count) || !*uc_path) { |
| /* strange, but this condition could be faced even with size == 2 */ |
| g_free(uc_path); |
| continue; |
| } |
| |
| res = g_new0(GuestFilesystemTrimResult, 1); |
| |
| path = g_utf16_to_utf8(uc_path, char_count, NULL, NULL, &gerr); |
| |
| g_free(uc_path); |
| |
| if (!path) { |
| res->has_error = true; |
| res->error = g_strdup(gerr->message); |
| g_error_free(gerr); |
| break; |
| } |
| |
| res->path = path; |
| |
| QAPI_LIST_PREPEND(resp->paths, res); |
| |
| memset(argv, 0, sizeof(argv)); |
| argv[0] = (gchar *)"defrag.exe"; |
| argv[1] = (gchar *)"/L"; |
| argv[2] = path; |
| |
| if (!g_spawn_sync(NULL, argv, NULL, G_SPAWN_SEARCH_PATH, NULL, NULL, |
| &out /* stdout */, NULL /* stdin */, |
| NULL, &gerr)) { |
| res->has_error = true; |
| res->error = g_strdup(gerr->message); |
| g_error_free(gerr); |
| } else { |
| /* defrag.exe is UGLY. Exit code is ALWAYS zero. |
| Error is reported in the output with something like |
| (x89000020) etc code in the stdout */ |
| |
| int i; |
| gchar **lines = g_strsplit(out, "\r\n", 0); |
| g_free(out); |
| |
| for (i = 0; lines[i] != NULL; i++) { |
| if (g_strstr_len(lines[i], -1, "(0x") == NULL) { |
| continue; |
| } |
| res->has_error = true; |
| res->error = g_strdup(lines[i]); |
| break; |
| } |
| g_strfreev(lines); |
| } |
| } while (FindNextVolumeW(handle, guid, ARRAYSIZE(guid))); |
| |
| FindVolumeClose(handle); |
| return resp; |
| } |
| |
| typedef enum { |
| GUEST_SUSPEND_MODE_DISK, |
| GUEST_SUSPEND_MODE_RAM |
| } GuestSuspendMode; |
| |
| static void check_suspend_mode(GuestSuspendMode mode, Error **errp) |
| { |
| SYSTEM_POWER_CAPABILITIES sys_pwr_caps; |
| |
| ZeroMemory(&sys_pwr_caps, sizeof(sys_pwr_caps)); |
| if (!GetPwrCapabilities(&sys_pwr_caps)) { |
| error_setg(errp, QERR_QGA_COMMAND_FAILED, |
| "failed to determine guest suspend capabilities"); |
| return; |
| } |
| |
| switch (mode) { |
| case GUEST_SUSPEND_MODE_DISK: |
| if (!sys_pwr_caps.SystemS4) { |
| error_setg(errp, QERR_QGA_COMMAND_FAILED, |
| "suspend-to-disk not supported by OS"); |
| } |
| break; |
| case GUEST_SUSPEND_MODE_RAM: |
| if (!sys_pwr_caps.SystemS3) { |
| error_setg(errp, QERR_QGA_COMMAND_FAILED, |
| "suspend-to-ram not supported by OS"); |
| } |
| break; |
| default: |
| abort(); |
| } |
| } |
| |
| static DWORD WINAPI do_suspend(LPVOID opaque) |
| { |
| GuestSuspendMode *mode = opaque; |
| DWORD ret = 0; |
| |
| if (!SetSuspendState(*mode == GUEST_SUSPEND_MODE_DISK, TRUE, TRUE)) { |
| g_autofree gchar *emsg = g_win32_error_message(GetLastError()); |
| slog("failed to suspend guest: %s", emsg); |
| ret = -1; |
| } |
| g_free(mode); |
| return ret; |
| } |
| |
| void qmp_guest_suspend_disk(Error **errp) |
| { |
| Error *local_err = NULL; |
| GuestSuspendMode *mode = g_new(GuestSuspendMode, 1); |
| |
| *mode = GUEST_SUSPEND_MODE_DISK; |
| check_suspend_mode(*mode, &local_err); |
| if (local_err) { |
| goto out; |
| } |
| acquire_privilege(SE_SHUTDOWN_NAME, &local_err); |
| if (local_err) { |
| goto out; |
| } |
| execute_async(do_suspend, mode, &local_err); |
| |
| out: |
| if (local_err) { |
| error_propagate(errp, local_err); |
| g_free(mode); |
| } |
| } |
| |
| void qmp_guest_suspend_ram(Error **errp) |
| { |
| Error *local_err = NULL; |
| GuestSuspendMode *mode = g_new(GuestSuspendMode, 1); |
| |
| *mode = GUEST_SUSPEND_MODE_RAM; |
| check_suspend_mode(*mode, &local_err); |
| if (local_err) { |
| goto out; |
| } |
| acquire_privilege(SE_SHUTDOWN_NAME, &local_err); |
| if (local_err) { |
| goto out; |
| } |
| execute_async(do_suspend, mode, &local_err); |
| |
| out: |
| if (local_err) { |
| error_propagate(errp, local_err); |
| g_free(mode); |
| } |
| } |
| |
| void qmp_guest_suspend_hybrid(Error **errp) |
| { |
| error_setg(errp, QERR_UNSUPPORTED); |
| } |
| |
| static IP_ADAPTER_ADDRESSES *guest_get_adapters_addresses(Error **errp) |
| { |
| IP_ADAPTER_ADDRESSES *adptr_addrs = NULL; |
| ULONG adptr_addrs_len = 0; |
| DWORD ret; |
| |
| /* Call the first time to get the adptr_addrs_len. */ |
| GetAdaptersAddresses(AF_UNSPEC, GAA_FLAG_INCLUDE_PREFIX, |
| NULL, adptr_addrs, &adptr_addrs_len); |
| |
| adptr_addrs = g_malloc(adptr_addrs_len); |
| ret = GetAdaptersAddresses(AF_UNSPEC, GAA_FLAG_INCLUDE_PREFIX, |
| NULL, adptr_addrs, &adptr_addrs_len); |
| if (ret != ERROR_SUCCESS) { |
| error_setg_win32(errp, ret, "failed to get adapters addresses"); |
| g_free(adptr_addrs); |
| adptr_addrs = NULL; |
| } |
| return adptr_addrs; |
| } |
| |
| static char *guest_wctomb_dup(WCHAR *wstr) |
| { |
| char *str; |
| size_t str_size; |
| |
| str_size = WideCharToMultiByte(CP_UTF8, 0, wstr, -1, NULL, 0, NULL, NULL); |
| /* add 1 to str_size for NULL terminator */ |
| str = g_malloc(str_size + 1); |
| WideCharToMultiByte(CP_UTF8, 0, wstr, -1, str, str_size, NULL, NULL); |
| return str; |
| } |
| |
| static char *guest_addr_to_str(IP_ADAPTER_UNICAST_ADDRESS *ip_addr, |
| Error **errp) |
| { |
| char addr_str[INET6_ADDRSTRLEN + INET_ADDRSTRLEN]; |
| DWORD len; |
| int ret; |
| |
| if (ip_addr->Address.lpSockaddr->sa_family == AF_INET || |
| ip_addr->Address.lpSockaddr->sa_family == AF_INET6) { |
| len = sizeof(addr_str); |
| ret = WSAAddressToString(ip_addr->Address.lpSockaddr, |
| ip_addr->Address.iSockaddrLength, |
| NULL, |
| addr_str, |
| &len); |
| if (ret != 0) { |
| error_setg_win32(errp, WSAGetLastError(), |
| "failed address presentation form conversion"); |
| return NULL; |
| } |
| return g_strdup(addr_str); |
| } |
| return NULL; |
| } |
| |
| static int64_t guest_ip_prefix(IP_ADAPTER_UNICAST_ADDRESS *ip_addr) |
| { |
| /* For Windows Vista/2008 and newer, use the OnLinkPrefixLength |
| * field to obtain the prefix. |
| */ |
| return ip_addr->OnLinkPrefixLength; |
| } |
| |
| #define INTERFACE_PATH_BUF_SZ 512 |
| |
| static DWORD get_interface_index(const char *guid) |
| { |
| ULONG index; |
| DWORD status; |
| wchar_t wbuf[INTERFACE_PATH_BUF_SZ]; |
| snwprintf(wbuf, INTERFACE_PATH_BUF_SZ, L"\\device\\tcpip_%s", guid); |
| wbuf[INTERFACE_PATH_BUF_SZ - 1] = 0; |
| status = GetAdapterIndex (wbuf, &index); |
| if (status != NO_ERROR) { |
| return (DWORD)~0; |
| } else { |
| return index; |
| } |
| } |
| |
| typedef NETIOAPI_API (WINAPI *GetIfEntry2Func)(PMIB_IF_ROW2 Row); |
| |
| static int guest_get_network_stats(const char *name, |
| GuestNetworkInterfaceStat *stats) |
| { |
| OSVERSIONINFO os_ver; |
| |
| os_ver.dwOSVersionInfoSize = sizeof(OSVERSIONINFO); |
| GetVersionEx(&os_ver); |
| if (os_ver.dwMajorVersion >= 6) { |
| MIB_IF_ROW2 a_mid_ifrow; |
| GetIfEntry2Func getifentry2_ex; |
| DWORD if_index = 0; |
| HMODULE module = GetModuleHandle("iphlpapi"); |
| PVOID func = GetProcAddress(module, "GetIfEntry2"); |
| |
| if (func == NULL) { |
| return -1; |
| } |
| |
| getifentry2_ex = (GetIfEntry2Func)func; |
| if_index = get_interface_index(name); |
| if (if_index == (DWORD)~0) { |
| return -1; |
| } |
| |
| memset(&a_mid_ifrow, 0, sizeof(a_mid_ifrow)); |
| a_mid_ifrow.InterfaceIndex = if_index; |
| if (NO_ERROR == getifentry2_ex(&a_mid_ifrow)) { |
| stats->rx_bytes = a_mid_ifrow.InOctets; |
| stats->rx_packets = a_mid_ifrow.InUcastPkts; |
| stats->rx_errs = a_mid_ifrow.InErrors; |
| stats->rx_dropped = a_mid_ifrow.InDiscards; |
| stats->tx_bytes = a_mid_ifrow.OutOctets; |
| stats->tx_packets = a_mid_ifrow.OutUcastPkts; |
| stats->tx_errs = a_mid_ifrow.OutErrors; |
| stats->tx_dropped = a_mid_ifrow.OutDiscards; |
| return 0; |
| } |
| } |
| return -1; |
| } |
| |
| GuestNetworkInterfaceList *qmp_guest_network_get_interfaces(Error **errp) |
| { |
| IP_ADAPTER_ADDRESSES *adptr_addrs, *addr; |
| IP_ADAPTER_UNICAST_ADDRESS *ip_addr = NULL; |
| GuestNetworkInterfaceList *head = NULL, **tail = &head; |
| GuestIpAddressList *head_addr, **tail_addr; |
| GuestNetworkInterface *info; |
| GuestNetworkInterfaceStat *interface_stat = NULL; |
| GuestIpAddress *address_item = NULL; |
| unsigned char *mac_addr; |
| char *addr_str; |
| WORD wsa_version; |
| WSADATA wsa_data; |
| int ret; |
| |
| adptr_addrs = guest_get_adapters_addresses(errp); |
| if (adptr_addrs == NULL) { |
| return NULL; |
| } |
| |
| /* Make WSA APIs available. */ |
| wsa_version = MAKEWORD(2, 2); |
| ret = WSAStartup(wsa_version, &wsa_data); |
| if (ret != 0) { |
| error_setg_win32(errp, ret, "failed socket startup"); |
| goto out; |
| } |
| |
| for (addr = adptr_addrs; addr; addr = addr->Next) { |
| info = g_malloc0(sizeof(*info)); |
| |
| QAPI_LIST_APPEND(tail, info); |
| |
| info->name = guest_wctomb_dup(addr->FriendlyName); |
| |
| if (addr->PhysicalAddressLength != 0) { |
| mac_addr = addr->PhysicalAddress; |
| |
| info->hardware_address = |
| g_strdup_printf("%02x:%02x:%02x:%02x:%02x:%02x", |
| (int) mac_addr[0], (int) mac_addr[1], |
| (int) mac_addr[2], (int) mac_addr[3], |
| (int) mac_addr[4], (int) mac_addr[5]); |
| |
| info->has_hardware_address = true; |
| } |
| |
| head_addr = NULL; |
| tail_addr = &head_addr; |
| for (ip_addr = addr->FirstUnicastAddress; |
| ip_addr; |
| ip_addr = ip_addr->Next) { |
| addr_str = guest_addr_to_str(ip_addr, errp); |
| if (addr_str == NULL) { |
| continue; |
| } |
| |
| address_item = g_malloc0(sizeof(*address_item)); |
| |
| QAPI_LIST_APPEND(tail_addr, address_item); |
| |
| address_item->ip_address = addr_str; |
| address_item->prefix = guest_ip_prefix(ip_addr); |
| if (ip_addr->Address.lpSockaddr->sa_family == AF_INET) { |
| address_item->ip_address_type = GUEST_IP_ADDRESS_TYPE_IPV4; |
| } else if (ip_addr->Address.lpSockaddr->sa_family == AF_INET6) { |
| address_item->ip_address_type = GUEST_IP_ADDRESS_TYPE_IPV6; |
| } |
| } |
| if (head_addr) { |
| info->has_ip_addresses = true; |
| info->ip_addresses = head_addr; |
| } |
| if (!info->has_statistics) { |
| interface_stat = g_malloc0(sizeof(*interface_stat)); |
| if (guest_get_network_stats(addr->AdapterName, |
| interface_stat) == -1) { |
| info->has_statistics = false; |
| g_free(interface_stat); |
| } else { |
| info->statistics = interface_stat; |
| info->has_statistics = true; |
| } |
| } |
| } |
| WSACleanup(); |
| out: |
| g_free(adptr_addrs); |
| return head; |
| } |
| |
| static int64_t filetime_to_ns(const FILETIME *tf) |
| { |
| return ((((int64_t)tf->dwHighDateTime << 32) | tf->dwLowDateTime) |
| - W32_FT_OFFSET) * 100; |
| } |
| |
| void qmp_guest_set_time(bool has_time, int64_t time_ns, Error **errp) |
| { |
| Error *local_err = NULL; |
| SYSTEMTIME ts; |
| FILETIME tf; |
| LONGLONG time; |
| |
| if (!has_time) { |
| /* Unfortunately, Windows libraries don't provide an easy way to access |
| * RTC yet: |
| * |
| * https://msdn.microsoft.com/en-us/library/aa908981.aspx |
| * |
| * Instead, a workaround is to use the Windows win32tm command to |
| * resync the time using the Windows Time service. |
| */ |
| LPVOID msg_buffer; |
| DWORD ret_flags; |
| |
| HRESULT hr = system("w32tm /resync /nowait"); |
| |
| if (GetLastError() != 0) { |
| strerror_s((LPTSTR) & msg_buffer, 0, errno); |
| error_setg(errp, "system(...) failed: %s", (LPCTSTR)msg_buffer); |
| } else if (hr != 0) { |
| if (hr == HRESULT_FROM_WIN32(ERROR_SERVICE_NOT_ACTIVE)) { |
| error_setg(errp, "Windows Time service not running on the " |
| "guest"); |
| } else { |
| if (!FormatMessage(FORMAT_MESSAGE_ALLOCATE_BUFFER | |
| FORMAT_MESSAGE_FROM_SYSTEM | |
| FORMAT_MESSAGE_IGNORE_INSERTS, NULL, |
| (DWORD)hr, MAKELANGID(LANG_NEUTRAL, |
| SUBLANG_DEFAULT), (LPTSTR) & msg_buffer, 0, |
| NULL)) { |
| error_setg(errp, "w32tm failed with error (0x%lx), couldn'" |
| "t retrieve error message", hr); |
| } else { |
| error_setg(errp, "w32tm failed with error (0x%lx): %s", hr, |
| (LPCTSTR)msg_buffer); |
| LocalFree(msg_buffer); |
| } |
| } |
| } else if (!InternetGetConnectedState(&ret_flags, 0)) { |
| error_setg(errp, "No internet connection on guest, sync not " |
| "accurate"); |
| } |
| return; |
| } |
| |
| /* Validate time passed by user. */ |
| if (time_ns < 0 || time_ns / 100 > INT64_MAX - W32_FT_OFFSET) { |
| error_setg(errp, "Time %" PRId64 "is invalid", time_ns); |
| return; |
| } |
| |
| time = time_ns / 100 + W32_FT_OFFSET; |
| |
| tf.dwLowDateTime = (DWORD) time; |
| tf.dwHighDateTime = (DWORD) (time >> 32); |
| |
| if (!FileTimeToSystemTime(&tf, &ts)) { |
| error_setg(errp, "Failed to convert system time %d", |
| (int)GetLastError()); |
| return; |
| } |
| |
| acquire_privilege(SE_SYSTEMTIME_NAME, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return; |
| } |
| |
| if (!SetSystemTime(&ts)) { |
| error_setg(errp, "Failed to set time to guest: %d", (int)GetLastError()); |
| return; |
| } |
| } |
| |
| GuestLogicalProcessorList *qmp_guest_get_vcpus(Error **errp) |
| { |
| PSYSTEM_LOGICAL_PROCESSOR_INFORMATION pslpi, ptr; |
| DWORD length; |
| GuestLogicalProcessorList *head, **tail; |
| Error *local_err = NULL; |
| int64_t current; |
| |
| ptr = pslpi = NULL; |
| length = 0; |
| current = 0; |
| head = NULL; |
| tail = &head; |
| |
| if ((GetLogicalProcessorInformation(pslpi, &length) == FALSE) && |
| (GetLastError() == ERROR_INSUFFICIENT_BUFFER) && |
| (length > sizeof(SYSTEM_LOGICAL_PROCESSOR_INFORMATION))) { |
| ptr = pslpi = g_malloc0(length); |
| if (GetLogicalProcessorInformation(pslpi, &length) == FALSE) { |
| error_setg(&local_err, "Failed to get processor information: %d", |
| (int)GetLastError()); |
| } |
| } else { |
| error_setg(&local_err, |
| "Failed to get processor information buffer length: %d", |
| (int)GetLastError()); |
| } |
| |
| while ((local_err == NULL) && (length > 0)) { |
| if (pslpi->Relationship == RelationProcessorCore) { |
| ULONG_PTR cpu_bits = pslpi->ProcessorMask; |
| |
| while (cpu_bits > 0) { |
| if (!!(cpu_bits & 1)) { |
| GuestLogicalProcessor *vcpu; |
| |
| vcpu = g_malloc0(sizeof *vcpu); |
| vcpu->logical_id = current++; |
| vcpu->online = true; |
| vcpu->has_can_offline = true; |
| |
| QAPI_LIST_APPEND(tail, vcpu); |
| } |
| cpu_bits >>= 1; |
| } |
| } |
| length -= sizeof(SYSTEM_LOGICAL_PROCESSOR_INFORMATION); |
| pslpi++; /* next entry */ |
| } |
| |
| g_free(ptr); |
| |
| if (local_err == NULL) { |
| if (head != NULL) { |
| return head; |
| } |
| /* there's no guest with zero VCPUs */ |
| error_setg(&local_err, "Guest reported zero VCPUs"); |
| } |
| |
| qapi_free_GuestLogicalProcessorList(head); |
| error_propagate(errp, local_err); |
| return NULL; |
| } |
| |
| int64_t qmp_guest_set_vcpus(GuestLogicalProcessorList *vcpus, Error **errp) |
| { |
| error_setg(errp, QERR_UNSUPPORTED); |
| return -1; |
| } |
| |
| static gchar * |
| get_net_error_message(gint error) |
| { |
| HMODULE module = NULL; |
| gchar *retval = NULL; |
| wchar_t *msg = NULL; |
| int flags; |
| size_t nchars; |
| |
| flags = FORMAT_MESSAGE_ALLOCATE_BUFFER | |
| FORMAT_MESSAGE_IGNORE_INSERTS | |
| FORMAT_MESSAGE_FROM_SYSTEM; |
| |
| if (error >= NERR_BASE && error <= MAX_NERR) { |
| module = LoadLibraryExW(L"netmsg.dll", NULL, LOAD_LIBRARY_AS_DATAFILE); |
| |
| if (module != NULL) { |
| flags |= FORMAT_MESSAGE_FROM_HMODULE; |
| } |
| } |
| |
| FormatMessageW(flags, module, error, 0, (LPWSTR)&msg, 0, NULL); |
| |
| if (msg != NULL) { |
| nchars = wcslen(msg); |
| |
| if (nchars >= 2 && |
| msg[nchars - 1] == L'\n' && |
| msg[nchars - 2] == L'\r') { |
| msg[nchars - 2] = L'\0'; |
| } |
| |
| retval = g_utf16_to_utf8(msg, -1, NULL, NULL, NULL); |
| |
| LocalFree(msg); |
| } |
| |
| if (module != NULL) { |
| FreeLibrary(module); |
| } |
| |
| return retval; |
| } |
| |
| void qmp_guest_set_user_password(const char *username, |
| const char *password, |
| bool crypted, |
| Error **errp) |
| { |
| NET_API_STATUS nas; |
| char *rawpasswddata = NULL; |
| size_t rawpasswdlen; |
| wchar_t *user = NULL, *wpass = NULL; |
| USER_INFO_1003 pi1003 = { 0, }; |
| GError *gerr = NULL; |
| |
| if (crypted) { |
| error_setg(errp, QERR_UNSUPPORTED); |
| return; |
| } |
| |
| rawpasswddata = (char *)qbase64_decode(password, -1, &rawpasswdlen, errp); |
| if (!rawpasswddata) { |
| return; |
| } |
| rawpasswddata = g_renew(char, rawpasswddata, rawpasswdlen + 1); |
| rawpasswddata[rawpasswdlen] = '\0'; |
| |
| user = g_utf8_to_utf16(username, -1, NULL, NULL, &gerr); |
| if (!user) { |
| goto done; |
| } |
| |
| wpass = g_utf8_to_utf16(rawpasswddata, -1, NULL, NULL, &gerr); |
| if (!wpass) { |
| goto done; |
| } |
| |
| pi1003.usri1003_password = wpass; |
| nas = NetUserSetInfo(NULL, user, |
| 1003, (LPBYTE)&pi1003, |
| NULL); |
| |
| if (nas != NERR_Success) { |
| gchar *msg = get_net_error_message(nas); |
| error_setg(errp, "failed to set password: %s", msg); |
| g_free(msg); |
| } |
| |
| done: |
| if (gerr) { |
| error_setg(errp, QERR_QGA_COMMAND_FAILED, gerr->message); |
| g_error_free(gerr); |
| } |
| g_free(user); |
| g_free(wpass); |
| g_free(rawpasswddata); |
| } |
| |
| GuestMemoryBlockList *qmp_guest_get_memory_blocks(Error **errp) |
| { |
| error_setg(errp, QERR_UNSUPPORTED); |
| return NULL; |
| } |
| |
| GuestMemoryBlockResponseList * |
| qmp_guest_set_memory_blocks(GuestMemoryBlockList *mem_blks, Error **errp) |
| { |
| error_setg(errp, QERR_UNSUPPORTED); |
| return NULL; |
| } |
| |
| GuestMemoryBlockInfo *qmp_guest_get_memory_block_info(Error **errp) |
| { |
| error_setg(errp, QERR_UNSUPPORTED); |
| return NULL; |
| } |
| |
| /* add unsupported commands to the blacklist */ |
| GList *ga_command_blacklist_init(GList *blacklist) |
| { |
| const char *list_unsupported[] = { |
| "guest-suspend-hybrid", |
| "guest-set-vcpus", |
| "guest-get-memory-blocks", "guest-set-memory-blocks", |
| "guest-get-memory-block-size", "guest-get-memory-block-info", |
| NULL}; |
| char **p = (char **)list_unsupported; |
| |
| while (*p) { |
| blacklist = g_list_append(blacklist, g_strdup(*p++)); |
| } |
| |
| if (!vss_init(true)) { |
| g_debug("vss_init failed, vss commands are going to be disabled"); |
| const char *list[] = { |
| "guest-get-fsinfo", "guest-fsfreeze-status", |
| "guest-fsfreeze-freeze", "guest-fsfreeze-thaw", NULL}; |
| p = (char **)list; |
| |
| while (*p) { |
| blacklist = g_list_append(blacklist, g_strdup(*p++)); |
| } |
| } |
| |
| return blacklist; |
| } |
| |
| /* register init/cleanup routines for stateful command groups */ |
| void ga_command_state_init(GAState *s, GACommandState *cs) |
| { |
| if (!vss_initialized()) { |
| ga_command_state_add(cs, NULL, guest_fsfreeze_cleanup); |
| } |
| } |
| |
| /* MINGW is missing two fields: IncomingFrames & OutgoingFrames */ |
| typedef struct _GA_WTSINFOA { |
| WTS_CONNECTSTATE_CLASS State; |
| DWORD SessionId; |
| DWORD IncomingBytes; |
| DWORD OutgoingBytes; |
| DWORD IncomingFrames; |
| DWORD OutgoingFrames; |
| DWORD IncomingCompressedBytes; |
| DWORD OutgoingCompressedBy; |
| CHAR WinStationName[WINSTATIONNAME_LENGTH]; |
| CHAR Domain[DOMAIN_LENGTH]; |
| CHAR UserName[USERNAME_LENGTH + 1]; |
| LARGE_INTEGER ConnectTime; |
| LARGE_INTEGER DisconnectTime; |
| LARGE_INTEGER LastInputTime; |
| LARGE_INTEGER LogonTime; |
| LARGE_INTEGER CurrentTime; |
| |
| } GA_WTSINFOA; |
| |
| GuestUserList *qmp_guest_get_users(Error **errp) |
| { |
| #define QGA_NANOSECONDS 10000000 |
| |
| GHashTable *cache = NULL; |
| GuestUserList *head = NULL, **tail = &head; |
| |
| DWORD buffer_size = 0, count = 0, i = 0; |
| GA_WTSINFOA *info = NULL; |
| WTS_SESSION_INFOA *entries = NULL; |
| GuestUser *user = NULL; |
| gpointer value = NULL; |
| INT64 login = 0; |
| double login_time = 0; |
| |
| cache = g_hash_table_new(g_str_hash, g_str_equal); |
| |
| if (WTSEnumerateSessionsA(NULL, 0, 1, &entries, &count)) { |
| for (i = 0; i < count; ++i) { |
| buffer_size = 0; |
| info = NULL; |
| if (WTSQuerySessionInformationA( |
| NULL, |
| entries[i].SessionId, |
| WTSSessionInfo, |
| (LPSTR *)&info, |
| &buffer_size |
| )) { |
| |
| if (strlen(info->UserName) == 0) { |
| WTSFreeMemory(info); |
| continue; |
| } |
| |
| login = info->LogonTime.QuadPart; |
| login -= W32_FT_OFFSET; |
| login_time = ((double)login) / QGA_NANOSECONDS; |
| |
| if (g_hash_table_contains(cache, info->UserName)) { |
| value = g_hash_table_lookup(cache, info->UserName); |
| user = (GuestUser *)value; |
| if (user->login_time > login_time) { |
| user->login_time = login_time; |
| } |
| } else { |
| user = g_new0(GuestUser, 1); |
| |
| user->user = g_strdup(info->UserName); |
| user->domain = g_strdup(info->Domain); |
| user->has_domain = true; |
| |
| user->login_time = login_time; |
| |
| g_hash_table_add(cache, user->user); |
| |
| QAPI_LIST_APPEND(tail, user); |
| } |
| } |
| WTSFreeMemory(info); |
| } |
| WTSFreeMemory(entries); |
| } |
| g_hash_table_destroy(cache); |
| return head; |
| } |
| |
| typedef struct _ga_matrix_lookup_t { |
| int major; |
| int minor; |
| char const *version; |
| char const *version_id; |
| } ga_matrix_lookup_t; |
| |
| static ga_matrix_lookup_t const WIN_VERSION_MATRIX[2][7] = { |
| { |
| /* Desktop editions */ |
| { 5, 0, "Microsoft Windows 2000", "2000"}, |
| { 5, 1, "Microsoft Windows XP", "xp"}, |
| { 6, 0, "Microsoft Windows Vista", "vista"}, |
| { 6, 1, "Microsoft Windows 7" "7"}, |
| { 6, 2, "Microsoft Windows 8", "8"}, |
| { 6, 3, "Microsoft Windows 8.1", "8.1"}, |
| { 0, 0, 0} |
| },{ |
| /* Server editions */ |
| { 5, 2, "Microsoft Windows Server 2003", "2003"}, |
| { 6, 0, "Microsoft Windows Server 2008", "2008"}, |
| { 6, 1, "Microsoft Windows Server 2008 R2", "2008r2"}, |
| { 6, 2, "Microsoft Windows Server 2012", "2012"}, |
| { 6, 3, "Microsoft Windows Server 2012 R2", "2012r2"}, |
| { 0, 0, 0}, |
| { 0, 0, 0} |
| } |
| }; |
| |
| typedef struct _ga_win_10_0_t { |
| int first_build; |
| char const *version; |
| char const *version_id; |
| } ga_win_10_0_t; |
| |
| static ga_win_10_0_t const WIN_10_0_SERVER_VERSION_MATRIX[4] = { |
| {14393, "Microsoft Windows Server 2016", "2016"}, |
| {17763, "Microsoft Windows Server 2019", "2019"}, |
| {20344, "Microsoft Windows Server 2022", "2022"}, |
| {0, 0} |
| }; |
| |
| static ga_win_10_0_t const WIN_10_0_CLIENT_VERSION_MATRIX[3] = { |
| {10240, "Microsoft Windows 10", "10"}, |
| {22000, "Microsoft Windows 11", "11"}, |
| {0, 0} |
| }; |
| |
| static void ga_get_win_version(RTL_OSVERSIONINFOEXW *info, Error **errp) |
| { |
| typedef NTSTATUS(WINAPI *rtl_get_version_t)( |
| RTL_OSVERSIONINFOEXW *os_version_info_ex); |
| |
| info->dwOSVersionInfoSize = sizeof(RTL_OSVERSIONINFOEXW); |
| |
| HMODULE module = GetModuleHandle("ntdll"); |
| PVOID fun = GetProcAddress(module, "RtlGetVersion"); |
| if (fun == NULL) { |
| error_setg(errp, QERR_QGA_COMMAND_FAILED, |
| "Failed to get address of RtlGetVersion"); |
| return; |
| } |
| |
| rtl_get_version_t rtl_get_version = (rtl_get_version_t)fun; |
| rtl_get_version(info); |
| return; |
| } |
| |
| static char *ga_get_win_name(OSVERSIONINFOEXW const *os_version, bool id) |
| { |
| DWORD major = os_version->dwMajorVersion; |
| DWORD minor = os_version->dwMinorVersion; |
| DWORD build = os_version->dwBuildNumber; |
| int tbl_idx = (os_version->wProductType != VER_NT_WORKSTATION); |
| ga_matrix_lookup_t const *table = WIN_VERSION_MATRIX[tbl_idx]; |
| ga_win_10_0_t const *win_10_0_table = tbl_idx ? |
| WIN_10_0_SERVER_VERSION_MATRIX : WIN_10_0_CLIENT_VERSION_MATRIX; |
| ga_win_10_0_t const *win_10_0_version = NULL; |
| while (table->version != NULL) { |
| if (major == 10 && minor == 0) { |
| while (win_10_0_table->version != NULL) { |
| if (build >= win_10_0_table->first_build) { |
| win_10_0_version = win_10_0_table; |
| } |
| win_10_0_table++; |
| } |
| if (win_10_0_table) { |
| if (id) { |
| return g_strdup(win_10_0_version->version_id); |
| } else { |
| return g_strdup(win_10_0_version->version); |
| } |
| } |
| } else if (major == table->major && minor == table->minor) { |
| if (id) { |
| return g_strdup(table->version_id); |
| } else { |
| return g_strdup(table->version); |
| } |
| } |
| ++table; |
| } |
| slog("failed to lookup Windows version: major=%lu, minor=%lu", |
| major, minor); |
| return g_strdup("N/A"); |
| } |
| |
| static char *ga_get_win_product_name(Error **errp) |
| { |
| HKEY key = INVALID_HANDLE_VALUE; |
| DWORD size = 128; |
| char *result = g_malloc0(size); |
| LONG err = ERROR_SUCCESS; |
| |
| err = RegOpenKeyA(HKEY_LOCAL_MACHINE, |
| "SOFTWARE\\Microsoft\\Windows NT\\CurrentVersion", |
| &key); |
| if (err != ERROR_SUCCESS) { |
| error_setg_win32(errp, err, "failed to open registry key"); |
| g_free(result); |
| return NULL; |
| } |
| |
| err = RegQueryValueExA(key, "ProductName", NULL, NULL, |
| (LPBYTE)result, &size); |
| if (err == ERROR_MORE_DATA) { |
| slog("ProductName longer than expected (%lu bytes), retrying", |
| size); |
| g_free(result); |
| result = NULL; |
| if (size > 0) { |
| result = g_malloc0(size); |
| err = RegQueryValueExA(key, "ProductName", NULL, NULL, |
| (LPBYTE)result, &size); |
| } |
| } |
| if (err != ERROR_SUCCESS) { |
| error_setg_win32(errp, err, "failed to retrive ProductName"); |
| goto fail; |
| } |
| |
| RegCloseKey(key); |
| return result; |
| |
| fail: |
| if (key != INVALID_HANDLE_VALUE) { |
| RegCloseKey(key); |
| } |
| g_free(result); |
| return NULL; |
| } |
| |
| static char *ga_get_current_arch(void) |
| { |
| SYSTEM_INFO info; |
| GetNativeSystemInfo(&info); |
| char *result = NULL; |
| switch (info.wProcessorArchitecture) { |
| case PROCESSOR_ARCHITECTURE_AMD64: |
| result = g_strdup("x86_64"); |
| break; |
| case PROCESSOR_ARCHITECTURE_ARM: |
| result = g_strdup("arm"); |
| break; |
| case PROCESSOR_ARCHITECTURE_IA64: |
| result = g_strdup("ia64"); |
| break; |
| case PROCESSOR_ARCHITECTURE_INTEL: |
| result = g_strdup("x86"); |
| break; |
| case PROCESSOR_ARCHITECTURE_UNKNOWN: |
| default: |
| slog("unknown processor architecture 0x%0x", |
| info.wProcessorArchitecture); |
| result = g_strdup("unknown"); |
| break; |
| } |
| return result; |
| } |
| |
| GuestOSInfo *qmp_guest_get_osinfo(Error **errp) |
| { |
| Error *local_err = NULL; |
| OSVERSIONINFOEXW os_version = {0}; |
| bool server; |
| char *product_name; |
| GuestOSInfo *info; |
| |
| ga_get_win_version(&os_version, &local_err); |
| if (local_err) { |
| error_propagate(errp, local_err); |
| return NULL; |
| } |
| |
| server = os_version.wProductType != VER_NT_WORKSTATION; |
| product_name = ga_get_win_product_name(errp); |
| if (product_name == NULL) { |
| return NULL; |
| } |
| |
| info = g_new0(GuestOSInfo, 1); |
| |
| info->has_kernel_version = true; |
| info->kernel_version = g_strdup_printf("%lu.%lu", |
| os_version.dwMajorVersion, |
| os_version.dwMinorVersion); |
| info->has_kernel_release = true; |
| info->kernel_release = g_strdup_printf("%lu", |
| os_version.dwBuildNumber); |
| info->has_machine = true; |
| info->machine = ga_get_current_arch(); |
| |
| info->has_id = true; |
| info->id = g_strdup("mswindows"); |
| info->has_name = true; |
| info->name = g_strdup("Microsoft Windows"); |
| info->has_pretty_name = true; |
| info->pretty_name = product_name; |
| info->has_version = true; |
| info->version = ga_get_win_name(&os_version, false); |
| info->has_version_id = true; |
| info->version_id = ga_get_win_name(&os_version, true); |
| info->has_variant = true; |
| info->variant = g_strdup(server ? "server" : "client"); |
| info->has_variant_id = true; |
| info->variant_id = g_strdup(server ? "server" : "client"); |
| |
| return info; |
| } |
| |
| /* |
| * Safely get device property. Returned strings are using wide characters. |
| * Caller is responsible for freeing the buffer. |
| */ |
| static LPBYTE cm_get_property(DEVINST devInst, const DEVPROPKEY *propName, |
| PDEVPROPTYPE propType) |
| { |
| CONFIGRET cr; |
| g_autofree LPBYTE buffer = NULL; |
| ULONG buffer_len = 0; |
| |
| /* First query for needed space */ |
| cr = CM_Get_DevNode_PropertyW(devInst, propName, propType, |
| buffer, &buffer_len, 0); |
| if (cr != CR_SUCCESS && cr != CR_BUFFER_SMALL) { |
| |
| slog("failed to get property size, error=0x%lx", cr); |
| return NULL; |
| } |
| buffer = g_new0(BYTE, buffer_len + 1); |
| cr = CM_Get_DevNode_PropertyW(devInst, propName, propType, |
| buffer, &buffer_len, 0); |
| if (cr != CR_SUCCESS) { |
| slog("failed to get device property, error=0x%lx", cr); |
| return NULL; |
| } |
| return g_steal_pointer(&buffer); |
| } |
| |
| static GStrv ga_get_hardware_ids(DEVINST devInstance) |
| { |
| GArray *values = NULL; |
| DEVPROPTYPE cm_type; |
| LPWSTR id; |
| g_autofree LPWSTR property = (LPWSTR)cm_get_property(devInstance, |
| &qga_DEVPKEY_Device_HardwareIds, &cm_type); |
| if (property == NULL) { |
| slog("failed to get hardware IDs"); |
| return NULL; |
| } |
| if (*property == '\0') { |
| /* empty list */ |
| return NULL; |
| } |
| values = g_array_new(TRUE, TRUE, sizeof(gchar *)); |
| for (id = property; '\0' != *id; id += lstrlenW(id) + 1) { |
| gchar *id8 = g_utf16_to_utf8(id, -1, NULL, NULL, NULL); |
| g_array_append_val(values, id8); |
| } |
| return (GStrv)g_array_free(values, FALSE); |
| } |
| |
| /* |
| * https://docs.microsoft.com/en-us/windows-hardware/drivers/install/identifiers-for-pci-devices |
| */ |
| #define DEVICE_PCI_RE "PCI\\\\VEN_(1AF4|1B36)&DEV_([0-9A-B]{4})(&|$)" |
| |
| GuestDeviceInfoList *qmp_guest_get_devices(Error **errp) |
| { |
| GuestDeviceInfoList *head = NULL, **tail = &head; |
| HDEVINFO dev_info = INVALID_HANDLE_VALUE; |
| SP_DEVINFO_DATA dev_info_data; |
| int i, j; |
| GError *gerr = NULL; |
| g_autoptr(GRegex) device_pci_re = NULL; |
| DEVPROPTYPE cm_type; |
| |
| device_pci_re = g_regex_new(DEVICE_PCI_RE, |
| G_REGEX_ANCHORED | G_REGEX_OPTIMIZE, 0, |
| &gerr); |
| g_assert(device_pci_re != NULL); |
| |
| dev_info_data.cbSize = sizeof(SP_DEVINFO_DATA); |
| dev_info = SetupDiGetClassDevs(0, 0, 0, DIGCF_PRESENT | DIGCF_ALLCLASSES); |
| if (dev_info == INVALID_HANDLE_VALUE) { |
| error_setg(errp, "failed to get device tree"); |
| return NULL; |
| } |
| |
| slog("enumerating devices"); |
| for (i = 0; SetupDiEnumDeviceInfo(dev_info, i, &dev_info_data); i++) { |
| bool skip = true; |
| g_autofree LPWSTR name = NULL; |
| g_autofree LPFILETIME date = NULL; |
| g_autofree LPWSTR version = NULL; |
| g_auto(GStrv) hw_ids = NULL; |
| g_autoptr(GuestDeviceInfo) device = g_new0(GuestDeviceInfo, 1); |
| g_autofree char *vendor_id = NULL; |
| g_autofree char *device_id = NULL; |
| |
| name = (LPWSTR)cm_get_property(dev_info_data.DevInst, |
| &qga_DEVPKEY_NAME, &cm_type); |
| if (name == NULL) { |
| slog("failed to get device description"); |
| continue; |
| } |
| device->driver_name = g_utf16_to_utf8(name, -1, NULL, NULL, NULL); |
| if (device->driver_name == NULL) { |
| error_setg(errp, "conversion to utf8 failed (driver name)"); |
| return NULL; |
| } |
| slog("querying device: %s", device->driver_name); |
| hw_ids = ga_get_hardware_ids(dev_info_data.DevInst); |
| if (hw_ids == NULL) { |
| continue; |
| } |
| for (j = 0; hw_ids[j] != NULL; j++) { |
| g_autoptr(GMatchInfo) match_info; |
| GuestDeviceIdPCI *id; |
| if (!g_regex_match(device_pci_re, hw_ids[j], 0, &match_info)) { |
| continue; |
| } |
| skip = false; |
| |
| vendor_id = g_match_info_fetch(match_info, 1); |
| device_id = g_match_info_fetch(match_info, 2); |
| |
| device->id = g_new0(GuestDeviceId, 1); |
| device->has_id = true; |
| device->id->type = GUEST_DEVICE_TYPE_PCI; |
| id = &device->id->u.pci; |
| id->vendor_id = g_ascii_strtoull(vendor_id, NULL, 16); |
| id->device_id = g_ascii_strtoull(device_id, NULL, 16); |
| |
| break; |
| } |
| if (skip) { |
| continue; |
| } |
| |
| version = (LPWSTR)cm_get_property(dev_info_data.DevInst, |
| &qga_DEVPKEY_Device_DriverVersion, &cm_type); |
| if (version == NULL) { |
| slog("failed to get driver version"); |
| continue; |
| } |
| device->driver_version = g_utf16_to_utf8(version, -1, NULL, |
| NULL, NULL); |
| if (device->driver_version == NULL) { |
| error_setg(errp, "conversion to utf8 failed (driver version)"); |
| return NULL; |
| } |
| device->has_driver_version = true; |
| |
| date = (LPFILETIME)cm_get_property(dev_info_data.DevInst, |
| &qga_DEVPKEY_Device_DriverDate, &cm_type); |
| if (date == NULL) { |
| slog("failed to get driver date"); |
| continue; |
| } |
| device->driver_date = filetime_to_ns(date); |
| device->has_driver_date = true; |
| |
| slog("driver: %s\ndriver version: %" PRId64 ",%s\n", |
| device->driver_name, device->driver_date, |
| device->driver_version); |
| QAPI_LIST_APPEND(tail, g_steal_pointer(&device)); |
| } |
| |
| if (dev_info != INVALID_HANDLE_VALUE) { |
| SetupDiDestroyDeviceInfoList(dev_info); |
| } |
| return head; |
| } |
| |
| char *qga_get_host_name(Error **errp) |
| { |
| wchar_t tmp[MAX_COMPUTERNAME_LENGTH + 1]; |
| DWORD size = G_N_ELEMENTS(tmp); |
| |
| if (GetComputerNameW(tmp, &size) == 0) { |
| error_setg_win32(errp, GetLastError(), "failed close handle"); |
| return NULL; |
| } |
| |
| return g_utf16_to_utf8(tmp, size, NULL, NULL, NULL); |
| } |