| /* |
| * Emulated CXL Switch Upstream Port |
| * |
| * Copyright (c) 2022 Huawei Technologies. |
| * |
| * Based on xio3130_upstream.c |
| * |
| * SPDX-License-Identifier: GPL-2.0-or-later |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/log.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/pci/msi.h" |
| #include "hw/pci/pcie.h" |
| #include "hw/pci/pcie_port.h" |
| #include "hw/pci-bridge/cxl_upstream_port.h" |
| /* |
| * Null value of all Fs suggested by IEEE RA guidelines for use of |
| * EU, OUI and CID |
| */ |
| #define UI64_NULL (~0ULL) |
| |
| #define CXL_UPSTREAM_PORT_MSI_NR_VECTOR 2 |
| |
| #define CXL_UPSTREAM_PORT_MSI_OFFSET 0x70 |
| #define CXL_UPSTREAM_PORT_PCIE_CAP_OFFSET 0x90 |
| #define CXL_UPSTREAM_PORT_AER_OFFSET 0x100 |
| #define CXL_UPSTREAM_PORT_SN_OFFSET \ |
| (CXL_UPSTREAM_PORT_AER_OFFSET + PCI_ERR_SIZEOF) |
| #define CXL_UPSTREAM_PORT_DVSEC_OFFSET \ |
| (CXL_UPSTREAM_PORT_SN_OFFSET + PCI_EXT_CAP_DSN_SIZEOF) |
| |
| CXLComponentState *cxl_usp_to_cstate(CXLUpstreamPort *usp) |
| { |
| return &usp->cxl_cstate; |
| } |
| |
| static void cxl_usp_dvsec_write_config(PCIDevice *dev, uint32_t addr, |
| uint32_t val, int len) |
| { |
| CXLUpstreamPort *usp = CXL_USP(dev); |
| |
| if (range_contains(&usp->cxl_cstate.dvsecs[EXTENSIONS_PORT_DVSEC], addr)) { |
| uint8_t *reg = &dev->config[addr]; |
| addr -= usp->cxl_cstate.dvsecs[EXTENSIONS_PORT_DVSEC].lob; |
| if (addr == PORT_CONTROL_OFFSET) { |
| if (pci_get_word(reg) & PORT_CONTROL_UNMASK_SBR) { |
| /* unmask SBR */ |
| qemu_log_mask(LOG_UNIMP, "SBR mask control is not supported\n"); |
| } |
| if (pci_get_word(reg) & PORT_CONTROL_ALT_MEMID_EN) { |
| /* Alt Memory & ID Space Enable */ |
| qemu_log_mask(LOG_UNIMP, |
| "Alt Memory & ID space is not supported\n"); |
| } |
| } |
| } |
| } |
| |
| static void cxl_usp_write_config(PCIDevice *d, uint32_t address, |
| uint32_t val, int len) |
| { |
| CXLUpstreamPort *usp = CXL_USP(d); |
| |
| pcie_doe_write_config(&usp->doe_cdat, address, val, len); |
| pci_bridge_write_config(d, address, val, len); |
| pcie_cap_flr_write_config(d, address, val, len); |
| pcie_aer_write_config(d, address, val, len); |
| |
| cxl_usp_dvsec_write_config(d, address, val, len); |
| } |
| |
| static uint32_t cxl_usp_read_config(PCIDevice *d, uint32_t address, int len) |
| { |
| CXLUpstreamPort *usp = CXL_USP(d); |
| uint32_t val; |
| |
| if (pcie_doe_read_config(&usp->doe_cdat, address, len, &val)) { |
| return val; |
| } |
| |
| return pci_default_read_config(d, address, len); |
| } |
| |
| static void latch_registers(CXLUpstreamPort *usp) |
| { |
| uint32_t *reg_state = usp->cxl_cstate.crb.cache_mem_registers; |
| uint32_t *write_msk = usp->cxl_cstate.crb.cache_mem_regs_write_mask; |
| |
| cxl_component_register_init_common(reg_state, write_msk, |
| CXL2_UPSTREAM_PORT); |
| ARRAY_FIELD_DP32(reg_state, CXL_HDM_DECODER_CAPABILITY, TARGET_COUNT, 8); |
| } |
| |
| static void cxl_usp_reset(DeviceState *qdev) |
| { |
| PCIDevice *d = PCI_DEVICE(qdev); |
| CXLUpstreamPort *usp = CXL_USP(qdev); |
| |
| pci_bridge_reset(qdev); |
| pcie_cap_deverr_reset(d); |
| latch_registers(usp); |
| } |
| |
| static void build_dvsecs(CXLComponentState *cxl) |
| { |
| uint8_t *dvsec; |
| |
| dvsec = (uint8_t *)&(CXLDVSECPortExt){ |
| .status = 0x1, /* Port Power Management Init Complete */ |
| }; |
| cxl_component_create_dvsec(cxl, CXL2_UPSTREAM_PORT, |
| EXTENSIONS_PORT_DVSEC_LENGTH, |
| EXTENSIONS_PORT_DVSEC, |
| EXTENSIONS_PORT_DVSEC_REVID, dvsec); |
| dvsec = (uint8_t *)&(CXLDVSECPortFlexBus){ |
| .cap = 0x27, /* Cache, IO, Mem, non-MLD */ |
| .ctrl = 0x27, /* Cache, IO, Mem */ |
| .status = 0x26, /* same */ |
| .rcvd_mod_ts_data_phase1 = 0xef, /* WTF? */ |
| }; |
| cxl_component_create_dvsec(cxl, CXL2_UPSTREAM_PORT, |
| PCIE_CXL3_FLEXBUS_PORT_DVSEC_LENGTH, |
| PCIE_FLEXBUS_PORT_DVSEC, |
| PCIE_CXL3_FLEXBUS_PORT_DVSEC_REVID, dvsec); |
| |
| dvsec = (uint8_t *)&(CXLDVSECRegisterLocator){ |
| .rsvd = 0, |
| .reg0_base_lo = RBI_COMPONENT_REG | CXL_COMPONENT_REG_BAR_IDX, |
| .reg0_base_hi = 0, |
| }; |
| cxl_component_create_dvsec(cxl, CXL2_UPSTREAM_PORT, |
| REG_LOC_DVSEC_LENGTH, REG_LOC_DVSEC, |
| REG_LOC_DVSEC_REVID, dvsec); |
| } |
| |
| static bool cxl_doe_cdat_rsp(DOECap *doe_cap) |
| { |
| CDATObject *cdat = &CXL_USP(doe_cap->pdev)->cxl_cstate.cdat; |
| uint16_t ent; |
| void *base; |
| uint32_t len; |
| CDATReq *req = pcie_doe_get_write_mbox_ptr(doe_cap); |
| CDATRsp rsp; |
| |
| cxl_doe_cdat_update(&CXL_USP(doe_cap->pdev)->cxl_cstate, &error_fatal); |
| assert(cdat->entry_len); |
| |
| /* Discard if request length mismatched */ |
| if (pcie_doe_get_obj_len(req) < |
| DIV_ROUND_UP(sizeof(CDATReq), sizeof(uint32_t))) { |
| return false; |
| } |
| |
| ent = req->entry_handle; |
| base = cdat->entry[ent].base; |
| len = cdat->entry[ent].length; |
| |
| rsp = (CDATRsp) { |
| .header = { |
| .vendor_id = CXL_VENDOR_ID, |
| .data_obj_type = CXL_DOE_TABLE_ACCESS, |
| .reserved = 0x0, |
| .length = DIV_ROUND_UP((sizeof(rsp) + len), sizeof(uint32_t)), |
| }, |
| .rsp_code = CXL_DOE_TAB_RSP, |
| .table_type = CXL_DOE_TAB_TYPE_CDAT, |
| .entry_handle = (ent < cdat->entry_len - 1) ? |
| ent + 1 : CXL_DOE_TAB_ENT_MAX, |
| }; |
| |
| memcpy(doe_cap->read_mbox, &rsp, sizeof(rsp)); |
| memcpy(doe_cap->read_mbox + DIV_ROUND_UP(sizeof(rsp), sizeof(uint32_t)), |
| base, len); |
| |
| doe_cap->read_mbox_len += rsp.header.length; |
| |
| return true; |
| } |
| |
| static DOEProtocol doe_cdat_prot[] = { |
| { CXL_VENDOR_ID, CXL_DOE_TABLE_ACCESS, cxl_doe_cdat_rsp }, |
| { } |
| }; |
| |
| enum { |
| CXL_USP_CDAT_SSLBIS_LAT, |
| CXL_USP_CDAT_SSLBIS_BW, |
| CXL_USP_CDAT_NUM_ENTRIES |
| }; |
| |
| static int build_cdat_table(CDATSubHeader ***cdat_table, void *priv) |
| { |
| CDATSslbis *sslbis_latency; |
| CDATSslbis *sslbis_bandwidth; |
| CXLUpstreamPort *us = CXL_USP(priv); |
| PCIBus *bus = &PCI_BRIDGE(us)->sec_bus; |
| int devfn, sslbis_size, i; |
| int count = 0; |
| uint16_t port_ids[256]; |
| |
| for (devfn = 0; devfn < ARRAY_SIZE(bus->devices); devfn++) { |
| PCIDevice *d = bus->devices[devfn]; |
| PCIEPort *port; |
| |
| if (!d || !pci_is_express(d) || !d->exp.exp_cap) { |
| continue; |
| } |
| |
| /* |
| * Whilst the PCI express spec doesn't allow anything other than |
| * downstream ports on this bus, let us be a little paranoid |
| */ |
| if (!object_dynamic_cast(OBJECT(d), TYPE_PCIE_PORT)) { |
| continue; |
| } |
| |
| port = PCIE_PORT(d); |
| port_ids[count] = port->port; |
| count++; |
| } |
| |
| /* May not yet have any ports - try again later */ |
| if (count == 0) { |
| return 0; |
| } |
| |
| sslbis_size = sizeof(CDATSslbis) + sizeof(*sslbis_latency->sslbe) * count; |
| sslbis_latency = g_malloc(sslbis_size); |
| *sslbis_latency = (CDATSslbis) { |
| .sslbis_header = { |
| .header = { |
| .type = CDAT_TYPE_SSLBIS, |
| .length = sslbis_size, |
| }, |
| .data_type = HMAT_LB_DATA_TYPE_ACCESS_LATENCY, |
| .entry_base_unit = 10000, |
| }, |
| }; |
| |
| for (i = 0; i < count; i++) { |
| sslbis_latency->sslbe[i] = (CDATSslbe) { |
| .port_x_id = CDAT_PORT_ID_USP, |
| .port_y_id = port_ids[i], |
| .latency_bandwidth = 15, /* 150ns */ |
| }; |
| } |
| |
| sslbis_bandwidth = g_malloc(sslbis_size); |
| *sslbis_bandwidth = (CDATSslbis) { |
| .sslbis_header = { |
| .header = { |
| .type = CDAT_TYPE_SSLBIS, |
| .length = sslbis_size, |
| }, |
| .data_type = HMAT_LB_DATA_TYPE_ACCESS_BANDWIDTH, |
| .entry_base_unit = 1024, |
| }, |
| }; |
| |
| for (i = 0; i < count; i++) { |
| sslbis_bandwidth->sslbe[i] = (CDATSslbe) { |
| .port_x_id = CDAT_PORT_ID_USP, |
| .port_y_id = port_ids[i], |
| .latency_bandwidth = 16, /* 16 GB/s */ |
| }; |
| } |
| |
| *cdat_table = g_new0(CDATSubHeader *, CXL_USP_CDAT_NUM_ENTRIES); |
| |
| /* Header always at start of structure */ |
| (*cdat_table)[CXL_USP_CDAT_SSLBIS_LAT] = (CDATSubHeader *)sslbis_latency; |
| (*cdat_table)[CXL_USP_CDAT_SSLBIS_BW] = (CDATSubHeader *)sslbis_bandwidth; |
| |
| return CXL_USP_CDAT_NUM_ENTRIES; |
| } |
| |
| static void free_default_cdat_table(CDATSubHeader **cdat_table, int num, |
| void *priv) |
| { |
| int i; |
| |
| for (i = 0; i < num; i++) { |
| g_free(cdat_table[i]); |
| } |
| g_free(cdat_table); |
| } |
| |
| static void cxl_usp_realize(PCIDevice *d, Error **errp) |
| { |
| ERRP_GUARD(); |
| PCIEPort *p = PCIE_PORT(d); |
| CXLUpstreamPort *usp = CXL_USP(d); |
| CXLComponentState *cxl_cstate = &usp->cxl_cstate; |
| ComponentRegisters *cregs = &cxl_cstate->crb; |
| MemoryRegion *component_bar = &cregs->component_registers; |
| int rc; |
| |
| pci_bridge_initfn(d, TYPE_PCIE_BUS); |
| pcie_port_init_reg(d); |
| |
| rc = msi_init(d, CXL_UPSTREAM_PORT_MSI_OFFSET, |
| CXL_UPSTREAM_PORT_MSI_NR_VECTOR, true, true, errp); |
| if (rc) { |
| assert(rc == -ENOTSUP); |
| goto err_bridge; |
| } |
| |
| rc = pcie_cap_init(d, CXL_UPSTREAM_PORT_PCIE_CAP_OFFSET, |
| PCI_EXP_TYPE_UPSTREAM, p->port, errp); |
| if (rc < 0) { |
| goto err_msi; |
| } |
| |
| pcie_cap_flr_init(d); |
| pcie_cap_deverr_init(d); |
| rc = pcie_aer_init(d, PCI_ERR_VER, CXL_UPSTREAM_PORT_AER_OFFSET, |
| PCI_ERR_SIZEOF, errp); |
| if (rc) { |
| goto err_cap; |
| } |
| if (usp->sn != UI64_NULL) { |
| pcie_dev_ser_num_init(d, CXL_UPSTREAM_PORT_SN_OFFSET, usp->sn); |
| } |
| cxl_cstate->dvsec_offset = CXL_UPSTREAM_PORT_DVSEC_OFFSET; |
| cxl_cstate->pdev = d; |
| build_dvsecs(cxl_cstate); |
| cxl_component_register_block_init(OBJECT(d), cxl_cstate, TYPE_CXL_USP); |
| pci_register_bar(d, CXL_COMPONENT_REG_BAR_IDX, |
| PCI_BASE_ADDRESS_SPACE_MEMORY | |
| PCI_BASE_ADDRESS_MEM_TYPE_64, |
| component_bar); |
| |
| pcie_doe_init(d, &usp->doe_cdat, cxl_cstate->dvsec_offset, doe_cdat_prot, |
| true, 1); |
| |
| cxl_cstate->cdat.build_cdat_table = build_cdat_table; |
| cxl_cstate->cdat.free_cdat_table = free_default_cdat_table; |
| cxl_cstate->cdat.private = d; |
| if (!cxl_doe_cdat_init(cxl_cstate, errp)) { |
| goto err_cap; |
| } |
| |
| return; |
| |
| err_cap: |
| pcie_cap_exit(d); |
| err_msi: |
| msi_uninit(d); |
| err_bridge: |
| pci_bridge_exitfn(d); |
| } |
| |
| static void cxl_usp_exitfn(PCIDevice *d) |
| { |
| pcie_aer_exit(d); |
| pcie_cap_exit(d); |
| msi_uninit(d); |
| pci_bridge_exitfn(d); |
| } |
| |
| static Property cxl_upstream_props[] = { |
| DEFINE_PROP_UINT64("sn", CXLUpstreamPort, sn, UI64_NULL), |
| DEFINE_PROP_STRING("cdat", CXLUpstreamPort, cxl_cstate.cdat.filename), |
| DEFINE_PROP_END_OF_LIST() |
| }; |
| |
| static void cxl_upstream_class_init(ObjectClass *oc, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(oc); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(oc); |
| |
| k->config_write = cxl_usp_write_config; |
| k->config_read = cxl_usp_read_config; |
| k->realize = cxl_usp_realize; |
| k->exit = cxl_usp_exitfn; |
| k->vendor_id = 0x19e5; /* Huawei */ |
| k->device_id = 0xa128; /* Emulated CXL Switch Upstream Port */ |
| k->revision = 0; |
| set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); |
| dc->desc = "CXL Switch Upstream Port"; |
| device_class_set_legacy_reset(dc, cxl_usp_reset); |
| device_class_set_props(dc, cxl_upstream_props); |
| } |
| |
| static const TypeInfo cxl_usp_info = { |
| .name = TYPE_CXL_USP, |
| .parent = TYPE_PCIE_PORT, |
| .instance_size = sizeof(CXLUpstreamPort), |
| .class_init = cxl_upstream_class_init, |
| .interfaces = (InterfaceInfo[]) { |
| { INTERFACE_PCIE_DEVICE }, |
| { INTERFACE_CXL_DEVICE }, |
| { } |
| }, |
| }; |
| |
| static void cxl_usp_register_type(void) |
| { |
| type_register_static(&cxl_usp_info); |
| } |
| |
| type_init(cxl_usp_register_type); |