| /* |
| * QEMU PIIX PCI ISA Bridge Emulation |
| * |
| * Copyright (c) 2006 Fabrice Bellard |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/range.h" |
| #include "hw/southbridge/piix.h" |
| #include "hw/irq.h" |
| #include "hw/isa/isa.h" |
| #include "hw/xen/xen.h" |
| #include "sysemu/xen.h" |
| #include "sysemu/reset.h" |
| #include "sysemu/runstate.h" |
| #include "migration/vmstate.h" |
| |
| #define XEN_PIIX_NUM_PIRQS 128ULL |
| |
| #define TYPE_PIIX3_DEVICE "PIIX3" |
| #define TYPE_PIIX3_XEN_DEVICE "PIIX3-xen" |
| |
| static void piix3_set_irq_pic(PIIX3State *piix3, int pic_irq) |
| { |
| qemu_set_irq(piix3->pic[pic_irq], |
| !!(piix3->pic_levels & |
| (((1ULL << PIIX_NUM_PIRQS) - 1) << |
| (pic_irq * PIIX_NUM_PIRQS)))); |
| } |
| |
| static void piix3_set_irq_level_internal(PIIX3State *piix3, int pirq, int level) |
| { |
| int pic_irq; |
| uint64_t mask; |
| |
| pic_irq = piix3->dev.config[PIIX_PIRQCA + pirq]; |
| if (pic_irq >= PIIX_NUM_PIC_IRQS) { |
| return; |
| } |
| |
| mask = 1ULL << ((pic_irq * PIIX_NUM_PIRQS) + pirq); |
| piix3->pic_levels &= ~mask; |
| piix3->pic_levels |= mask * !!level; |
| } |
| |
| static void piix3_set_irq_level(PIIX3State *piix3, int pirq, int level) |
| { |
| int pic_irq; |
| |
| pic_irq = piix3->dev.config[PIIX_PIRQCA + pirq]; |
| if (pic_irq >= PIIX_NUM_PIC_IRQS) { |
| return; |
| } |
| |
| piix3_set_irq_level_internal(piix3, pirq, level); |
| |
| piix3_set_irq_pic(piix3, pic_irq); |
| } |
| |
| static void piix3_set_irq(void *opaque, int pirq, int level) |
| { |
| PIIX3State *piix3 = opaque; |
| piix3_set_irq_level(piix3, pirq, level); |
| } |
| |
| static PCIINTxRoute piix3_route_intx_pin_to_irq(void *opaque, int pin) |
| { |
| PIIX3State *piix3 = opaque; |
| int irq = piix3->dev.config[PIIX_PIRQCA + pin]; |
| PCIINTxRoute route; |
| |
| if (irq < PIIX_NUM_PIC_IRQS) { |
| route.mode = PCI_INTX_ENABLED; |
| route.irq = irq; |
| } else { |
| route.mode = PCI_INTX_DISABLED; |
| route.irq = -1; |
| } |
| return route; |
| } |
| |
| /* irq routing is changed. so rebuild bitmap */ |
| static void piix3_update_irq_levels(PIIX3State *piix3) |
| { |
| PCIBus *bus = pci_get_bus(&piix3->dev); |
| int pirq; |
| |
| piix3->pic_levels = 0; |
| for (pirq = 0; pirq < PIIX_NUM_PIRQS; pirq++) { |
| piix3_set_irq_level(piix3, pirq, pci_bus_get_irq_level(bus, pirq)); |
| } |
| } |
| |
| static void piix3_write_config(PCIDevice *dev, |
| uint32_t address, uint32_t val, int len) |
| { |
| pci_default_write_config(dev, address, val, len); |
| if (ranges_overlap(address, len, PIIX_PIRQCA, 4)) { |
| PIIX3State *piix3 = PIIX3_PCI_DEVICE(dev); |
| int pic_irq; |
| |
| pci_bus_fire_intx_routing_notifier(pci_get_bus(&piix3->dev)); |
| piix3_update_irq_levels(piix3); |
| for (pic_irq = 0; pic_irq < PIIX_NUM_PIC_IRQS; pic_irq++) { |
| piix3_set_irq_pic(piix3, pic_irq); |
| } |
| } |
| } |
| |
| static void piix3_write_config_xen(PCIDevice *dev, |
| uint32_t address, uint32_t val, int len) |
| { |
| xen_piix_pci_write_config_client(address, val, len); |
| piix3_write_config(dev, address, val, len); |
| } |
| |
| static void piix3_reset(void *opaque) |
| { |
| PIIX3State *d = opaque; |
| uint8_t *pci_conf = d->dev.config; |
| |
| pci_conf[0x04] = 0x07; /* master, memory and I/O */ |
| pci_conf[0x05] = 0x00; |
| pci_conf[0x06] = 0x00; |
| pci_conf[0x07] = 0x02; /* PCI_status_devsel_medium */ |
| pci_conf[0x4c] = 0x4d; |
| pci_conf[0x4e] = 0x03; |
| pci_conf[0x4f] = 0x00; |
| pci_conf[0x60] = 0x80; |
| pci_conf[0x61] = 0x80; |
| pci_conf[0x62] = 0x80; |
| pci_conf[0x63] = 0x80; |
| pci_conf[0x69] = 0x02; |
| pci_conf[0x70] = 0x80; |
| pci_conf[0x76] = 0x0c; |
| pci_conf[0x77] = 0x0c; |
| pci_conf[0x78] = 0x02; |
| pci_conf[0x79] = 0x00; |
| pci_conf[0x80] = 0x00; |
| pci_conf[0x82] = 0x00; |
| pci_conf[0xa0] = 0x08; |
| pci_conf[0xa2] = 0x00; |
| pci_conf[0xa3] = 0x00; |
| pci_conf[0xa4] = 0x00; |
| pci_conf[0xa5] = 0x00; |
| pci_conf[0xa6] = 0x00; |
| pci_conf[0xa7] = 0x00; |
| pci_conf[0xa8] = 0x0f; |
| pci_conf[0xaa] = 0x00; |
| pci_conf[0xab] = 0x00; |
| pci_conf[0xac] = 0x00; |
| pci_conf[0xae] = 0x00; |
| |
| d->pic_levels = 0; |
| d->rcr = 0; |
| } |
| |
| static int piix3_post_load(void *opaque, int version_id) |
| { |
| PIIX3State *piix3 = opaque; |
| int pirq; |
| |
| /* |
| * Because the i8259 has not been deserialized yet, qemu_irq_raise |
| * might bring the system to a different state than the saved one; |
| * for example, the interrupt could be masked but the i8259 would |
| * not know that yet and would trigger an interrupt in the CPU. |
| * |
| * Here, we update irq levels without raising the interrupt. |
| * Interrupt state will be deserialized separately through the i8259. |
| */ |
| piix3->pic_levels = 0; |
| for (pirq = 0; pirq < PIIX_NUM_PIRQS; pirq++) { |
| piix3_set_irq_level_internal(piix3, pirq, |
| pci_bus_get_irq_level(pci_get_bus(&piix3->dev), pirq)); |
| } |
| return 0; |
| } |
| |
| static int piix3_pre_save(void *opaque) |
| { |
| int i; |
| PIIX3State *piix3 = opaque; |
| |
| for (i = 0; i < ARRAY_SIZE(piix3->pci_irq_levels_vmstate); i++) { |
| piix3->pci_irq_levels_vmstate[i] = |
| pci_bus_get_irq_level(pci_get_bus(&piix3->dev), i); |
| } |
| |
| return 0; |
| } |
| |
| static bool piix3_rcr_needed(void *opaque) |
| { |
| PIIX3State *piix3 = opaque; |
| |
| return (piix3->rcr != 0); |
| } |
| |
| static const VMStateDescription vmstate_piix3_rcr = { |
| .name = "PIIX3/rcr", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .needed = piix3_rcr_needed, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT8(rcr, PIIX3State), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription vmstate_piix3 = { |
| .name = "PIIX3", |
| .version_id = 3, |
| .minimum_version_id = 2, |
| .post_load = piix3_post_load, |
| .pre_save = piix3_pre_save, |
| .fields = (VMStateField[]) { |
| VMSTATE_PCI_DEVICE(dev, PIIX3State), |
| VMSTATE_INT32_ARRAY_V(pci_irq_levels_vmstate, PIIX3State, |
| PIIX_NUM_PIRQS, 3), |
| VMSTATE_END_OF_LIST() |
| }, |
| .subsections = (const VMStateDescription*[]) { |
| &vmstate_piix3_rcr, |
| NULL |
| } |
| }; |
| |
| |
| static void rcr_write(void *opaque, hwaddr addr, uint64_t val, unsigned len) |
| { |
| PIIX3State *d = opaque; |
| |
| if (val & 4) { |
| qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); |
| return; |
| } |
| d->rcr = val & 2; /* keep System Reset type only */ |
| } |
| |
| static uint64_t rcr_read(void *opaque, hwaddr addr, unsigned len) |
| { |
| PIIX3State *d = opaque; |
| |
| return d->rcr; |
| } |
| |
| static const MemoryRegionOps rcr_ops = { |
| .read = rcr_read, |
| .write = rcr_write, |
| .endianness = DEVICE_LITTLE_ENDIAN |
| }; |
| |
| static void piix3_realize(PCIDevice *dev, Error **errp) |
| { |
| PIIX3State *d = PIIX3_PCI_DEVICE(dev); |
| |
| if (!isa_bus_new(DEVICE(d), get_system_memory(), |
| pci_address_space_io(dev), errp)) { |
| return; |
| } |
| |
| memory_region_init_io(&d->rcr_mem, OBJECT(dev), &rcr_ops, d, |
| "piix3-reset-control", 1); |
| memory_region_add_subregion_overlap(pci_address_space_io(dev), |
| PIIX_RCR_IOPORT, &d->rcr_mem, 1); |
| |
| qemu_register_reset(piix3_reset, d); |
| } |
| |
| static void pci_piix3_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| dc->desc = "ISA bridge"; |
| dc->vmsd = &vmstate_piix3; |
| dc->hotpluggable = false; |
| k->realize = piix3_realize; |
| k->vendor_id = PCI_VENDOR_ID_INTEL; |
| /* 82371SB PIIX3 PCI-to-ISA bridge (Step A1) */ |
| k->device_id = PCI_DEVICE_ID_INTEL_82371SB_0; |
| k->class_id = PCI_CLASS_BRIDGE_ISA; |
| /* |
| * Reason: part of PIIX3 southbridge, needs to be wired up by |
| * pc_piix.c's pc_init1() |
| */ |
| dc->user_creatable = false; |
| } |
| |
| static const TypeInfo piix3_pci_type_info = { |
| .name = TYPE_PIIX3_PCI_DEVICE, |
| .parent = TYPE_PCI_DEVICE, |
| .instance_size = sizeof(PIIX3State), |
| .abstract = true, |
| .class_init = pci_piix3_class_init, |
| .interfaces = (InterfaceInfo[]) { |
| { INTERFACE_CONVENTIONAL_PCI_DEVICE }, |
| { }, |
| }, |
| }; |
| |
| static void piix3_class_init(ObjectClass *klass, void *data) |
| { |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| k->config_write = piix3_write_config; |
| } |
| |
| static const TypeInfo piix3_info = { |
| .name = TYPE_PIIX3_DEVICE, |
| .parent = TYPE_PIIX3_PCI_DEVICE, |
| .class_init = piix3_class_init, |
| }; |
| |
| static void piix3_xen_class_init(ObjectClass *klass, void *data) |
| { |
| PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); |
| |
| k->config_write = piix3_write_config_xen; |
| }; |
| |
| static const TypeInfo piix3_xen_info = { |
| .name = TYPE_PIIX3_XEN_DEVICE, |
| .parent = TYPE_PIIX3_PCI_DEVICE, |
| .class_init = piix3_xen_class_init, |
| }; |
| |
| static void piix3_register_types(void) |
| { |
| type_register_static(&piix3_pci_type_info); |
| type_register_static(&piix3_info); |
| type_register_static(&piix3_xen_info); |
| } |
| |
| type_init(piix3_register_types) |
| |
| /* |
| * Return the global irq number corresponding to a given device irq |
| * pin. We could also use the bus number to have a more precise mapping. |
| */ |
| static int pci_slot_get_pirq(PCIDevice *pci_dev, int pci_intx) |
| { |
| int slot_addend; |
| slot_addend = PCI_SLOT(pci_dev->devfn) - 1; |
| return (pci_intx + slot_addend) & 3; |
| } |
| |
| PIIX3State *piix3_create(PCIBus *pci_bus, ISABus **isa_bus) |
| { |
| PIIX3State *piix3; |
| PCIDevice *pci_dev; |
| |
| /* |
| * Xen supports additional interrupt routes from the PCI devices to |
| * the IOAPIC: the four pins of each PCI device on the bus are also |
| * connected to the IOAPIC directly. |
| * These additional routes can be discovered through ACPI. |
| */ |
| if (xen_enabled()) { |
| pci_dev = pci_create_simple_multifunction(pci_bus, -1, true, |
| TYPE_PIIX3_XEN_DEVICE); |
| piix3 = PIIX3_PCI_DEVICE(pci_dev); |
| pci_bus_irqs(pci_bus, xen_piix3_set_irq, xen_pci_slot_get_pirq, |
| piix3, XEN_PIIX_NUM_PIRQS); |
| } else { |
| pci_dev = pci_create_simple_multifunction(pci_bus, -1, true, |
| TYPE_PIIX3_DEVICE); |
| piix3 = PIIX3_PCI_DEVICE(pci_dev); |
| pci_bus_irqs(pci_bus, piix3_set_irq, pci_slot_get_pirq, |
| piix3, PIIX_NUM_PIRQS); |
| pci_bus_set_route_irq_fn(pci_bus, piix3_route_intx_pin_to_irq); |
| } |
| *isa_bus = ISA_BUS(qdev_get_child_bus(DEVICE(piix3), "isa.0")); |
| |
| return piix3; |
| } |