| /* |
| * gdb server stub |
| * |
| * This implements a subset of the remote protocol as described in: |
| * |
| * https://sourceware.org/gdb/onlinedocs/gdb/Remote-Protocol.html |
| * |
| * Copyright (c) 2003-2005 Fabrice Bellard |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License as published by the Free Software Foundation; either |
| * version 2 of the License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/>. |
| * |
| * SPDX-License-Identifier: LGPL-2.0+ |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/ctype.h" |
| #include "qemu/cutils.h" |
| #include "qemu/module.h" |
| #include "qemu/error-report.h" |
| #include "trace.h" |
| #include "exec/gdbstub.h" |
| #include "gdbstub/commands.h" |
| #include "gdbstub/syscalls.h" |
| #ifdef CONFIG_USER_ONLY |
| #include "accel/tcg/vcpu-state.h" |
| #include "gdbstub/user.h" |
| #else |
| #include "hw/cpu/cluster.h" |
| #include "hw/boards.h" |
| #endif |
| #include "hw/core/cpu.h" |
| |
| #include "sysemu/hw_accel.h" |
| #include "sysemu/runstate.h" |
| #include "exec/replay-core.h" |
| #include "exec/hwaddr.h" |
| |
| #include "internals.h" |
| |
| typedef struct GDBRegisterState { |
| int base_reg; |
| gdb_get_reg_cb get_reg; |
| gdb_set_reg_cb set_reg; |
| const GDBFeature *feature; |
| } GDBRegisterState; |
| |
| GDBState gdbserver_state; |
| |
| void gdb_init_gdbserver_state(void) |
| { |
| g_assert(!gdbserver_state.init); |
| memset(&gdbserver_state, 0, sizeof(GDBState)); |
| gdbserver_state.init = true; |
| gdbserver_state.str_buf = g_string_new(NULL); |
| gdbserver_state.mem_buf = g_byte_array_sized_new(MAX_PACKET_LENGTH); |
| gdbserver_state.last_packet = g_byte_array_sized_new(MAX_PACKET_LENGTH + 4); |
| |
| /* |
| * What single-step modes are supported is accelerator dependent. |
| * By default try to use no IRQs and no timers while single |
| * stepping so as to make single stepping like a typical ICE HW step. |
| */ |
| gdbserver_state.supported_sstep_flags = accel_supported_gdbstub_sstep_flags(); |
| gdbserver_state.sstep_flags = SSTEP_ENABLE | SSTEP_NOIRQ | SSTEP_NOTIMER; |
| gdbserver_state.sstep_flags &= gdbserver_state.supported_sstep_flags; |
| } |
| |
| /* writes 2*len+1 bytes in buf */ |
| void gdb_memtohex(GString *buf, const uint8_t *mem, int len) |
| { |
| int i, c; |
| for(i = 0; i < len; i++) { |
| c = mem[i]; |
| g_string_append_c(buf, tohex(c >> 4)); |
| g_string_append_c(buf, tohex(c & 0xf)); |
| } |
| g_string_append_c(buf, '\0'); |
| } |
| |
| void gdb_hextomem(GByteArray *mem, const char *buf, int len) |
| { |
| int i; |
| |
| for(i = 0; i < len; i++) { |
| guint8 byte = fromhex(buf[0]) << 4 | fromhex(buf[1]); |
| g_byte_array_append(mem, &byte, 1); |
| buf += 2; |
| } |
| } |
| |
| static void hexdump(const char *buf, int len, |
| void (*trace_fn)(size_t ofs, char const *text)) |
| { |
| char line_buffer[3 * 16 + 4 + 16 + 1]; |
| |
| size_t i; |
| for (i = 0; i < len || (i & 0xF); ++i) { |
| size_t byte_ofs = i & 15; |
| |
| if (byte_ofs == 0) { |
| memset(line_buffer, ' ', 3 * 16 + 4 + 16); |
| line_buffer[3 * 16 + 4 + 16] = 0; |
| } |
| |
| size_t col_group = (i >> 2) & 3; |
| size_t hex_col = byte_ofs * 3 + col_group; |
| size_t txt_col = 3 * 16 + 4 + byte_ofs; |
| |
| if (i < len) { |
| char value = buf[i]; |
| |
| line_buffer[hex_col + 0] = tohex((value >> 4) & 0xF); |
| line_buffer[hex_col + 1] = tohex((value >> 0) & 0xF); |
| line_buffer[txt_col + 0] = (value >= ' ' && value < 127) |
| ? value |
| : '.'; |
| } |
| |
| if (byte_ofs == 0xF) |
| trace_fn(i & -16, line_buffer); |
| } |
| } |
| |
| /* return -1 if error, 0 if OK */ |
| int gdb_put_packet_binary(const char *buf, int len, bool dump) |
| { |
| int csum, i; |
| uint8_t footer[3]; |
| |
| if (dump && trace_event_get_state_backends(TRACE_GDBSTUB_IO_BINARYREPLY)) { |
| hexdump(buf, len, trace_gdbstub_io_binaryreply); |
| } |
| |
| for(;;) { |
| g_byte_array_set_size(gdbserver_state.last_packet, 0); |
| g_byte_array_append(gdbserver_state.last_packet, |
| (const uint8_t *) "$", 1); |
| g_byte_array_append(gdbserver_state.last_packet, |
| (const uint8_t *) buf, len); |
| csum = 0; |
| for(i = 0; i < len; i++) { |
| csum += buf[i]; |
| } |
| footer[0] = '#'; |
| footer[1] = tohex((csum >> 4) & 0xf); |
| footer[2] = tohex((csum) & 0xf); |
| g_byte_array_append(gdbserver_state.last_packet, footer, 3); |
| |
| gdb_put_buffer(gdbserver_state.last_packet->data, |
| gdbserver_state.last_packet->len); |
| |
| if (gdb_got_immediate_ack()) { |
| break; |
| } |
| } |
| return 0; |
| } |
| |
| /* return -1 if error, 0 if OK */ |
| int gdb_put_packet(const char *buf) |
| { |
| trace_gdbstub_io_reply(buf); |
| |
| return gdb_put_packet_binary(buf, strlen(buf), false); |
| } |
| |
| void gdb_put_strbuf(void) |
| { |
| gdb_put_packet(gdbserver_state.str_buf->str); |
| } |
| |
| /* Encode data using the encoding for 'x' packets. */ |
| void gdb_memtox(GString *buf, const char *mem, int len) |
| { |
| char c; |
| |
| while (len--) { |
| c = *(mem++); |
| switch (c) { |
| case '#': case '$': case '*': case '}': |
| g_string_append_c(buf, '}'); |
| g_string_append_c(buf, c ^ 0x20); |
| break; |
| default: |
| g_string_append_c(buf, c); |
| break; |
| } |
| } |
| } |
| |
| static uint32_t gdb_get_cpu_pid(CPUState *cpu) |
| { |
| #ifdef CONFIG_USER_ONLY |
| return getpid(); |
| #else |
| if (cpu->cluster_index == UNASSIGNED_CLUSTER_INDEX) { |
| /* Return the default process' PID */ |
| int index = gdbserver_state.process_num - 1; |
| return gdbserver_state.processes[index].pid; |
| } |
| return cpu->cluster_index + 1; |
| #endif |
| } |
| |
| GDBProcess *gdb_get_process(uint32_t pid) |
| { |
| int i; |
| |
| if (!pid) { |
| /* 0 means any process, we take the first one */ |
| return &gdbserver_state.processes[0]; |
| } |
| |
| for (i = 0; i < gdbserver_state.process_num; i++) { |
| if (gdbserver_state.processes[i].pid == pid) { |
| return &gdbserver_state.processes[i]; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static GDBProcess *gdb_get_cpu_process(CPUState *cpu) |
| { |
| return gdb_get_process(gdb_get_cpu_pid(cpu)); |
| } |
| |
| static CPUState *find_cpu(uint32_t thread_id) |
| { |
| CPUState *cpu; |
| |
| CPU_FOREACH(cpu) { |
| if (gdb_get_cpu_index(cpu) == thread_id) { |
| return cpu; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| CPUState *gdb_get_first_cpu_in_process(GDBProcess *process) |
| { |
| CPUState *cpu; |
| |
| CPU_FOREACH(cpu) { |
| if (gdb_get_cpu_pid(cpu) == process->pid) { |
| return cpu; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static CPUState *gdb_next_cpu_in_process(CPUState *cpu) |
| { |
| uint32_t pid = gdb_get_cpu_pid(cpu); |
| cpu = CPU_NEXT(cpu); |
| |
| while (cpu) { |
| if (gdb_get_cpu_pid(cpu) == pid) { |
| break; |
| } |
| |
| cpu = CPU_NEXT(cpu); |
| } |
| |
| return cpu; |
| } |
| |
| /* Return the cpu following @cpu, while ignoring unattached processes. */ |
| static CPUState *gdb_next_attached_cpu(CPUState *cpu) |
| { |
| cpu = CPU_NEXT(cpu); |
| |
| while (cpu) { |
| if (gdb_get_cpu_process(cpu)->attached) { |
| break; |
| } |
| |
| cpu = CPU_NEXT(cpu); |
| } |
| |
| return cpu; |
| } |
| |
| /* Return the first attached cpu */ |
| CPUState *gdb_first_attached_cpu(void) |
| { |
| CPUState *cpu = first_cpu; |
| GDBProcess *process = gdb_get_cpu_process(cpu); |
| |
| if (!process->attached) { |
| return gdb_next_attached_cpu(cpu); |
| } |
| |
| return cpu; |
| } |
| |
| static CPUState *gdb_get_cpu(uint32_t pid, uint32_t tid) |
| { |
| GDBProcess *process; |
| CPUState *cpu; |
| |
| if (!pid && !tid) { |
| /* 0 means any process/thread, we take the first attached one */ |
| return gdb_first_attached_cpu(); |
| } else if (pid && !tid) { |
| /* any thread in a specific process */ |
| process = gdb_get_process(pid); |
| |
| if (process == NULL) { |
| return NULL; |
| } |
| |
| if (!process->attached) { |
| return NULL; |
| } |
| |
| return gdb_get_first_cpu_in_process(process); |
| } else { |
| /* a specific thread */ |
| cpu = find_cpu(tid); |
| |
| if (cpu == NULL) { |
| return NULL; |
| } |
| |
| process = gdb_get_cpu_process(cpu); |
| |
| if (pid && process->pid != pid) { |
| return NULL; |
| } |
| |
| if (!process->attached) { |
| return NULL; |
| } |
| |
| return cpu; |
| } |
| } |
| |
| static const char *get_feature_xml(const char *p, const char **newp, |
| GDBProcess *process) |
| { |
| CPUState *cpu = gdb_get_first_cpu_in_process(process); |
| CPUClass *cc = CPU_GET_CLASS(cpu); |
| GDBRegisterState *r; |
| size_t len; |
| |
| /* |
| * qXfer:features:read:ANNEX:OFFSET,LENGTH' |
| * ^p ^newp |
| */ |
| char *term = strchr(p, ':'); |
| *newp = term + 1; |
| len = term - p; |
| |
| /* Is it the main target xml? */ |
| if (strncmp(p, "target.xml", len) == 0) { |
| if (!process->target_xml) { |
| g_autoptr(GPtrArray) xml = g_ptr_array_new_with_free_func(g_free); |
| |
| g_ptr_array_add( |
| xml, |
| g_strdup("<?xml version=\"1.0\"?>" |
| "<!DOCTYPE target SYSTEM \"gdb-target.dtd\">" |
| "<target>")); |
| |
| if (cc->gdb_arch_name) { |
| g_ptr_array_add( |
| xml, |
| g_markup_printf_escaped("<architecture>%s</architecture>", |
| cc->gdb_arch_name(cpu))); |
| } |
| for (guint i = 0; i < cpu->gdb_regs->len; i++) { |
| r = &g_array_index(cpu->gdb_regs, GDBRegisterState, i); |
| g_ptr_array_add( |
| xml, |
| g_markup_printf_escaped("<xi:include href=\"%s\"/>", |
| r->feature->xmlname)); |
| } |
| g_ptr_array_add(xml, g_strdup("</target>")); |
| g_ptr_array_add(xml, NULL); |
| |
| process->target_xml = g_strjoinv(NULL, (void *)xml->pdata); |
| } |
| return process->target_xml; |
| } |
| /* Is it one of the features? */ |
| for (guint i = 0; i < cpu->gdb_regs->len; i++) { |
| r = &g_array_index(cpu->gdb_regs, GDBRegisterState, i); |
| if (strncmp(p, r->feature->xmlname, len) == 0) { |
| return r->feature->xml; |
| } |
| } |
| |
| /* failed */ |
| return NULL; |
| } |
| |
| void gdb_feature_builder_init(GDBFeatureBuilder *builder, GDBFeature *feature, |
| const char *name, const char *xmlname, |
| int base_reg) |
| { |
| char *header = g_markup_printf_escaped( |
| "<?xml version=\"1.0\"?>" |
| "<!DOCTYPE feature SYSTEM \"gdb-target.dtd\">" |
| "<feature name=\"%s\">", |
| name); |
| |
| builder->feature = feature; |
| builder->xml = g_ptr_array_new(); |
| g_ptr_array_add(builder->xml, header); |
| builder->regs = g_ptr_array_new(); |
| builder->base_reg = base_reg; |
| feature->xmlname = xmlname; |
| feature->name = name; |
| } |
| |
| void gdb_feature_builder_append_tag(const GDBFeatureBuilder *builder, |
| const char *format, ...) |
| { |
| va_list ap; |
| va_start(ap, format); |
| g_ptr_array_add(builder->xml, g_markup_vprintf_escaped(format, ap)); |
| va_end(ap); |
| } |
| |
| void gdb_feature_builder_append_reg(const GDBFeatureBuilder *builder, |
| const char *name, |
| int bitsize, |
| int regnum, |
| const char *type, |
| const char *group) |
| { |
| if (builder->regs->len <= regnum) { |
| g_ptr_array_set_size(builder->regs, regnum + 1); |
| } |
| |
| builder->regs->pdata[regnum] = (gpointer *)name; |
| |
| if (group) { |
| gdb_feature_builder_append_tag( |
| builder, |
| "<reg name=\"%s\" bitsize=\"%d\" regnum=\"%d\" type=\"%s\" group=\"%s\"/>", |
| name, bitsize, builder->base_reg + regnum, type, group); |
| } else { |
| gdb_feature_builder_append_tag( |
| builder, |
| "<reg name=\"%s\" bitsize=\"%d\" regnum=\"%d\" type=\"%s\"/>", |
| name, bitsize, builder->base_reg + regnum, type); |
| } |
| } |
| |
| void gdb_feature_builder_end(const GDBFeatureBuilder *builder) |
| { |
| g_ptr_array_add(builder->xml, (void *)"</feature>"); |
| g_ptr_array_add(builder->xml, NULL); |
| |
| builder->feature->xml = g_strjoinv(NULL, (void *)builder->xml->pdata); |
| |
| for (guint i = 0; i < builder->xml->len - 2; i++) { |
| g_free(g_ptr_array_index(builder->xml, i)); |
| } |
| |
| g_ptr_array_free(builder->xml, TRUE); |
| |
| builder->feature->num_regs = builder->regs->len; |
| builder->feature->regs = (void *)g_ptr_array_free(builder->regs, FALSE); |
| } |
| |
| const GDBFeature *gdb_find_static_feature(const char *xmlname) |
| { |
| const GDBFeature *feature; |
| |
| for (feature = gdb_static_features; feature->xmlname; feature++) { |
| if (!strcmp(feature->xmlname, xmlname)) { |
| return feature; |
| } |
| } |
| |
| g_assert_not_reached(); |
| } |
| |
| GArray *gdb_get_register_list(CPUState *cpu) |
| { |
| GArray *results = g_array_new(true, true, sizeof(GDBRegDesc)); |
| |
| /* registers are only available once the CPU is initialised */ |
| if (!cpu->gdb_regs) { |
| return results; |
| } |
| |
| for (int f = 0; f < cpu->gdb_regs->len; f++) { |
| GDBRegisterState *r = &g_array_index(cpu->gdb_regs, GDBRegisterState, f); |
| for (int i = 0; i < r->feature->num_regs; i++) { |
| const char *name = r->feature->regs[i]; |
| GDBRegDesc desc = { |
| r->base_reg + i, |
| name, |
| r->feature->name |
| }; |
| g_array_append_val(results, desc); |
| } |
| } |
| |
| return results; |
| } |
| |
| int gdb_read_register(CPUState *cpu, GByteArray *buf, int reg) |
| { |
| CPUClass *cc = CPU_GET_CLASS(cpu); |
| GDBRegisterState *r; |
| |
| if (reg < cc->gdb_num_core_regs) { |
| return cc->gdb_read_register(cpu, buf, reg); |
| } |
| |
| for (guint i = 0; i < cpu->gdb_regs->len; i++) { |
| r = &g_array_index(cpu->gdb_regs, GDBRegisterState, i); |
| if (r->base_reg <= reg && reg < r->base_reg + r->feature->num_regs) { |
| return r->get_reg(cpu, buf, reg - r->base_reg); |
| } |
| } |
| return 0; |
| } |
| |
| static int gdb_write_register(CPUState *cpu, uint8_t *mem_buf, int reg) |
| { |
| CPUClass *cc = CPU_GET_CLASS(cpu); |
| GDBRegisterState *r; |
| |
| if (reg < cc->gdb_num_core_regs) { |
| return cc->gdb_write_register(cpu, mem_buf, reg); |
| } |
| |
| for (guint i = 0; i < cpu->gdb_regs->len; i++) { |
| r = &g_array_index(cpu->gdb_regs, GDBRegisterState, i); |
| if (r->base_reg <= reg && reg < r->base_reg + r->feature->num_regs) { |
| return r->set_reg(cpu, mem_buf, reg - r->base_reg); |
| } |
| } |
| return 0; |
| } |
| |
| static void gdb_register_feature(CPUState *cpu, int base_reg, |
| gdb_get_reg_cb get_reg, gdb_set_reg_cb set_reg, |
| const GDBFeature *feature) |
| { |
| GDBRegisterState s = { |
| .base_reg = base_reg, |
| .get_reg = get_reg, |
| .set_reg = set_reg, |
| .feature = feature |
| }; |
| |
| g_array_append_val(cpu->gdb_regs, s); |
| } |
| |
| void gdb_init_cpu(CPUState *cpu) |
| { |
| CPUClass *cc = CPU_GET_CLASS(cpu); |
| const GDBFeature *feature; |
| |
| cpu->gdb_regs = g_array_new(false, false, sizeof(GDBRegisterState)); |
| |
| if (cc->gdb_core_xml_file) { |
| feature = gdb_find_static_feature(cc->gdb_core_xml_file); |
| gdb_register_feature(cpu, 0, |
| cc->gdb_read_register, cc->gdb_write_register, |
| feature); |
| cpu->gdb_num_regs = cpu->gdb_num_g_regs = feature->num_regs; |
| } |
| |
| if (cc->gdb_num_core_regs) { |
| cpu->gdb_num_regs = cpu->gdb_num_g_regs = cc->gdb_num_core_regs; |
| } |
| } |
| |
| void gdb_register_coprocessor(CPUState *cpu, |
| gdb_get_reg_cb get_reg, gdb_set_reg_cb set_reg, |
| const GDBFeature *feature, int g_pos) |
| { |
| GDBRegisterState *s; |
| guint i; |
| int base_reg = cpu->gdb_num_regs; |
| |
| for (i = 0; i < cpu->gdb_regs->len; i++) { |
| /* Check for duplicates. */ |
| s = &g_array_index(cpu->gdb_regs, GDBRegisterState, i); |
| if (s->feature == feature) { |
| return; |
| } |
| } |
| |
| gdb_register_feature(cpu, base_reg, get_reg, set_reg, feature); |
| |
| /* Add to end of list. */ |
| cpu->gdb_num_regs += feature->num_regs; |
| if (g_pos) { |
| if (g_pos != base_reg) { |
| error_report("Error: Bad gdb register numbering for '%s', " |
| "expected %d got %d", feature->xml, g_pos, base_reg); |
| } else { |
| cpu->gdb_num_g_regs = cpu->gdb_num_regs; |
| } |
| } |
| } |
| |
| void gdb_unregister_coprocessor_all(CPUState *cpu) |
| { |
| /* |
| * Safe to nuke everything. GDBRegisterState::xml is static const char so |
| * it won't be freed |
| */ |
| g_array_free(cpu->gdb_regs, true); |
| |
| cpu->gdb_regs = NULL; |
| cpu->gdb_num_regs = 0; |
| cpu->gdb_num_g_regs = 0; |
| } |
| |
| static void gdb_process_breakpoint_remove_all(GDBProcess *p) |
| { |
| CPUState *cpu = gdb_get_first_cpu_in_process(p); |
| |
| while (cpu) { |
| gdb_breakpoint_remove_all(cpu); |
| cpu = gdb_next_cpu_in_process(cpu); |
| } |
| } |
| |
| |
| static void gdb_set_cpu_pc(vaddr pc) |
| { |
| CPUState *cpu = gdbserver_state.c_cpu; |
| |
| cpu_synchronize_state(cpu); |
| cpu_set_pc(cpu, pc); |
| } |
| |
| void gdb_append_thread_id(CPUState *cpu, GString *buf) |
| { |
| if (gdbserver_state.multiprocess) { |
| g_string_append_printf(buf, "p%02x.%02x", |
| gdb_get_cpu_pid(cpu), gdb_get_cpu_index(cpu)); |
| } else { |
| g_string_append_printf(buf, "%02x", gdb_get_cpu_index(cpu)); |
| } |
| } |
| |
| static GDBThreadIdKind read_thread_id(const char *buf, const char **end_buf, |
| uint32_t *pid, uint32_t *tid) |
| { |
| unsigned long p, t; |
| int ret; |
| |
| if (*buf == 'p') { |
| buf++; |
| ret = qemu_strtoul(buf, &buf, 16, &p); |
| |
| if (ret) { |
| return GDB_READ_THREAD_ERR; |
| } |
| |
| /* Skip '.' */ |
| buf++; |
| } else { |
| p = 0; |
| } |
| |
| ret = qemu_strtoul(buf, &buf, 16, &t); |
| |
| if (ret) { |
| return GDB_READ_THREAD_ERR; |
| } |
| |
| *end_buf = buf; |
| |
| if (p == -1) { |
| return GDB_ALL_PROCESSES; |
| } |
| |
| if (pid) { |
| *pid = p; |
| } |
| |
| if (t == -1) { |
| return GDB_ALL_THREADS; |
| } |
| |
| if (tid) { |
| *tid = t; |
| } |
| |
| return GDB_ONE_THREAD; |
| } |
| |
| /** |
| * gdb_handle_vcont - Parses and handles a vCont packet. |
| * returns -ENOTSUP if a command is unsupported, -EINVAL or -ERANGE if there is |
| * a format error, 0 on success. |
| */ |
| static int gdb_handle_vcont(const char *p) |
| { |
| int res, signal = 0; |
| char cur_action; |
| unsigned long tmp; |
| uint32_t pid, tid; |
| GDBProcess *process; |
| CPUState *cpu; |
| GDBThreadIdKind kind; |
| unsigned int max_cpus = gdb_get_max_cpus(); |
| /* uninitialised CPUs stay 0 */ |
| g_autofree char *newstates = g_new0(char, max_cpus); |
| |
| /* mark valid CPUs with 1 */ |
| CPU_FOREACH(cpu) { |
| newstates[cpu->cpu_index] = 1; |
| } |
| |
| /* |
| * res keeps track of what error we are returning, with -ENOTSUP meaning |
| * that the command is unknown or unsupported, thus returning an empty |
| * packet, while -EINVAL and -ERANGE cause an E22 packet, due to invalid, |
| * or incorrect parameters passed. |
| */ |
| res = 0; |
| |
| /* |
| * target_count and last_target keep track of how many CPUs we are going to |
| * step or resume, and a pointer to the state structure of one of them, |
| * respectively |
| */ |
| int target_count = 0; |
| CPUState *last_target = NULL; |
| |
| while (*p) { |
| if (*p++ != ';') { |
| return -ENOTSUP; |
| } |
| |
| cur_action = *p++; |
| if (cur_action == 'C' || cur_action == 'S') { |
| cur_action = qemu_tolower(cur_action); |
| res = qemu_strtoul(p, &p, 16, &tmp); |
| if (res) { |
| return res; |
| } |
| signal = gdb_signal_to_target(tmp); |
| } else if (cur_action != 'c' && cur_action != 's') { |
| /* unknown/invalid/unsupported command */ |
| return -ENOTSUP; |
| } |
| |
| if (*p == '\0' || *p == ';') { |
| /* |
| * No thread specifier, action is on "all threads". The |
| * specification is unclear regarding the process to act on. We |
| * choose all processes. |
| */ |
| kind = GDB_ALL_PROCESSES; |
| } else if (*p++ == ':') { |
| kind = read_thread_id(p, &p, &pid, &tid); |
| } else { |
| return -ENOTSUP; |
| } |
| |
| switch (kind) { |
| case GDB_READ_THREAD_ERR: |
| return -EINVAL; |
| |
| case GDB_ALL_PROCESSES: |
| cpu = gdb_first_attached_cpu(); |
| while (cpu) { |
| if (newstates[cpu->cpu_index] == 1) { |
| newstates[cpu->cpu_index] = cur_action; |
| |
| target_count++; |
| last_target = cpu; |
| } |
| |
| cpu = gdb_next_attached_cpu(cpu); |
| } |
| break; |
| |
| case GDB_ALL_THREADS: |
| process = gdb_get_process(pid); |
| |
| if (!process->attached) { |
| return -EINVAL; |
| } |
| |
| cpu = gdb_get_first_cpu_in_process(process); |
| while (cpu) { |
| if (newstates[cpu->cpu_index] == 1) { |
| newstates[cpu->cpu_index] = cur_action; |
| |
| target_count++; |
| last_target = cpu; |
| } |
| |
| cpu = gdb_next_cpu_in_process(cpu); |
| } |
| break; |
| |
| case GDB_ONE_THREAD: |
| cpu = gdb_get_cpu(pid, tid); |
| |
| /* invalid CPU/thread specified */ |
| if (!cpu) { |
| return -EINVAL; |
| } |
| |
| /* only use if no previous match occourred */ |
| if (newstates[cpu->cpu_index] == 1) { |
| newstates[cpu->cpu_index] = cur_action; |
| |
| target_count++; |
| last_target = cpu; |
| } |
| break; |
| } |
| } |
| |
| /* |
| * if we're about to resume a specific set of CPUs/threads, make it so that |
| * in case execution gets interrupted, we can send GDB a stop reply with a |
| * correct value. it doesn't really matter which CPU we tell GDB the signal |
| * happened in (VM pauses stop all of them anyway), so long as it is one of |
| * the ones we resumed/single stepped here. |
| */ |
| if (target_count > 0) { |
| gdbserver_state.c_cpu = last_target; |
| } |
| |
| gdbserver_state.signal = signal; |
| gdb_continue_partial(newstates); |
| return res; |
| } |
| |
| static const char *cmd_next_param(const char *param, const char delimiter) |
| { |
| static const char all_delimiters[] = ",;:="; |
| char curr_delimiters[2] = {0}; |
| const char *delimiters; |
| |
| if (delimiter == '?') { |
| delimiters = all_delimiters; |
| } else if (delimiter == '0') { |
| return strchr(param, '\0'); |
| } else if (delimiter == '.' && *param) { |
| return param + 1; |
| } else { |
| curr_delimiters[0] = delimiter; |
| delimiters = curr_delimiters; |
| } |
| |
| param += strcspn(param, delimiters); |
| if (*param) { |
| param++; |
| } |
| return param; |
| } |
| |
| static int cmd_parse_params(const char *data, const char *schema, |
| GArray *params) |
| { |
| const char *curr_schema, *curr_data; |
| |
| g_assert(schema); |
| g_assert(params->len == 0); |
| |
| curr_schema = schema; |
| curr_data = data; |
| while (curr_schema[0] && curr_schema[1] && *curr_data) { |
| GdbCmdVariant this_param; |
| |
| switch (curr_schema[0]) { |
| case 'l': |
| if (qemu_strtoul(curr_data, &curr_data, 16, |
| &this_param.val_ul)) { |
| return -EINVAL; |
| } |
| curr_data = cmd_next_param(curr_data, curr_schema[1]); |
| g_array_append_val(params, this_param); |
| break; |
| case 'L': |
| if (qemu_strtou64(curr_data, &curr_data, 16, |
| (uint64_t *)&this_param.val_ull)) { |
| return -EINVAL; |
| } |
| curr_data = cmd_next_param(curr_data, curr_schema[1]); |
| g_array_append_val(params, this_param); |
| break; |
| case 's': |
| this_param.data = curr_data; |
| curr_data = cmd_next_param(curr_data, curr_schema[1]); |
| g_array_append_val(params, this_param); |
| break; |
| case 'o': |
| this_param.opcode = *(uint8_t *)curr_data; |
| curr_data = cmd_next_param(curr_data, curr_schema[1]); |
| g_array_append_val(params, this_param); |
| break; |
| case 't': |
| this_param.thread_id.kind = |
| read_thread_id(curr_data, &curr_data, |
| &this_param.thread_id.pid, |
| &this_param.thread_id.tid); |
| curr_data = cmd_next_param(curr_data, curr_schema[1]); |
| g_array_append_val(params, this_param); |
| break; |
| case '?': |
| curr_data = cmd_next_param(curr_data, curr_schema[1]); |
| break; |
| default: |
| return -EINVAL; |
| } |
| curr_schema += 2; |
| } |
| |
| return 0; |
| } |
| |
| static inline int startswith(const char *string, const char *pattern) |
| { |
| return !strncmp(string, pattern, strlen(pattern)); |
| } |
| |
| static bool process_string_cmd(const char *data, |
| const GdbCmdParseEntry *cmds, int num_cmds) |
| { |
| int i; |
| g_autoptr(GArray) params = g_array_new(false, true, sizeof(GdbCmdVariant)); |
| |
| if (!cmds) { |
| return false; |
| } |
| |
| for (i = 0; i < num_cmds; i++) { |
| const GdbCmdParseEntry *cmd = &cmds[i]; |
| void *user_ctx = NULL; |
| g_assert(cmd->handler && cmd->cmd); |
| |
| if ((cmd->cmd_startswith && !startswith(data, cmd->cmd)) || |
| (!cmd->cmd_startswith && strcmp(cmd->cmd, data))) { |
| continue; |
| } |
| |
| if (cmd->schema) { |
| if (cmd_parse_params(&data[strlen(cmd->cmd)], |
| cmd->schema, params)) { |
| return false; |
| } |
| } |
| |
| if (cmd->need_cpu_context) { |
| user_ctx = (void *)gdbserver_state.g_cpu; |
| } |
| |
| gdbserver_state.allow_stop_reply = cmd->allow_stop_reply; |
| cmd->handler(params, user_ctx); |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static void run_cmd_parser(const char *data, const GdbCmdParseEntry *cmd) |
| { |
| if (!data) { |
| return; |
| } |
| |
| g_string_set_size(gdbserver_state.str_buf, 0); |
| g_byte_array_set_size(gdbserver_state.mem_buf, 0); |
| |
| /* In case there was an error during the command parsing we must |
| * send a NULL packet to indicate the command is not supported */ |
| if (!process_string_cmd(data, cmd, 1)) { |
| gdb_put_packet(""); |
| } |
| } |
| |
| static void handle_detach(GArray *params, void *user_ctx) |
| { |
| GDBProcess *process; |
| uint32_t pid = 1; |
| |
| if (gdbserver_state.multiprocess) { |
| if (!params->len) { |
| gdb_put_packet("E22"); |
| return; |
| } |
| |
| pid = gdb_get_cmd_param(params, 0)->val_ul; |
| } |
| |
| #ifdef CONFIG_USER_ONLY |
| if (gdb_handle_detach_user(pid)) { |
| return; |
| } |
| #endif |
| |
| process = gdb_get_process(pid); |
| gdb_process_breakpoint_remove_all(process); |
| process->attached = false; |
| |
| if (pid == gdb_get_cpu_pid(gdbserver_state.c_cpu)) { |
| gdbserver_state.c_cpu = gdb_first_attached_cpu(); |
| } |
| |
| if (pid == gdb_get_cpu_pid(gdbserver_state.g_cpu)) { |
| gdbserver_state.g_cpu = gdb_first_attached_cpu(); |
| } |
| |
| if (!gdbserver_state.c_cpu) { |
| /* No more process attached */ |
| gdb_disable_syscalls(); |
| gdb_continue(); |
| } |
| gdb_put_packet("OK"); |
| } |
| |
| static void handle_thread_alive(GArray *params, void *user_ctx) |
| { |
| CPUState *cpu; |
| |
| if (!params->len) { |
| gdb_put_packet("E22"); |
| return; |
| } |
| |
| if (gdb_get_cmd_param(params, 0)->thread_id.kind == GDB_READ_THREAD_ERR) { |
| gdb_put_packet("E22"); |
| return; |
| } |
| |
| cpu = gdb_get_cpu(gdb_get_cmd_param(params, 0)->thread_id.pid, |
| gdb_get_cmd_param(params, 0)->thread_id.tid); |
| if (!cpu) { |
| gdb_put_packet("E22"); |
| return; |
| } |
| |
| gdb_put_packet("OK"); |
| } |
| |
| static void handle_continue(GArray *params, void *user_ctx) |
| { |
| if (params->len) { |
| gdb_set_cpu_pc(gdb_get_cmd_param(params, 0)->val_ull); |
| } |
| |
| gdbserver_state.signal = 0; |
| gdb_continue(); |
| } |
| |
| static void handle_cont_with_sig(GArray *params, void *user_ctx) |
| { |
| unsigned long signal = 0; |
| |
| /* |
| * Note: C sig;[addr] is currently unsupported and we simply |
| * omit the addr parameter |
| */ |
| if (params->len) { |
| signal = gdb_get_cmd_param(params, 0)->val_ul; |
| } |
| |
| gdbserver_state.signal = gdb_signal_to_target(signal); |
| if (gdbserver_state.signal == -1) { |
| gdbserver_state.signal = 0; |
| } |
| gdb_continue(); |
| } |
| |
| static void handle_set_thread(GArray *params, void *user_ctx) |
| { |
| uint32_t pid, tid; |
| CPUState *cpu; |
| |
| if (params->len != 2) { |
| gdb_put_packet("E22"); |
| return; |
| } |
| |
| if (gdb_get_cmd_param(params, 1)->thread_id.kind == GDB_READ_THREAD_ERR) { |
| gdb_put_packet("E22"); |
| return; |
| } |
| |
| if (gdb_get_cmd_param(params, 1)->thread_id.kind != GDB_ONE_THREAD) { |
| gdb_put_packet("OK"); |
| return; |
| } |
| |
| pid = gdb_get_cmd_param(params, 1)->thread_id.pid; |
| tid = gdb_get_cmd_param(params, 1)->thread_id.tid; |
| #ifdef CONFIG_USER_ONLY |
| if (gdb_handle_set_thread_user(pid, tid)) { |
| return; |
| } |
| #endif |
| cpu = gdb_get_cpu(pid, tid); |
| if (!cpu) { |
| gdb_put_packet("E22"); |
| return; |
| } |
| |
| /* |
| * Note: This command is deprecated and modern gdb's will be using the |
| * vCont command instead. |
| */ |
| switch (gdb_get_cmd_param(params, 0)->opcode) { |
| case 'c': |
| gdbserver_state.c_cpu = cpu; |
| gdb_put_packet("OK"); |
| break; |
| case 'g': |
| gdbserver_state.g_cpu = cpu; |
| gdb_put_packet("OK"); |
| break; |
| default: |
| gdb_put_packet("E22"); |
| break; |
| } |
| } |
| |
| static void handle_insert_bp(GArray *params, void *user_ctx) |
| { |
| int res; |
| |
| if (params->len != 3) { |
| gdb_put_packet("E22"); |
| return; |
| } |
| |
| res = gdb_breakpoint_insert(gdbserver_state.c_cpu, |
| gdb_get_cmd_param(params, 0)->val_ul, |
| gdb_get_cmd_param(params, 1)->val_ull, |
| gdb_get_cmd_param(params, 2)->val_ull); |
| if (res >= 0) { |
| gdb_put_packet("OK"); |
| return; |
| } else if (res == -ENOSYS) { |
| gdb_put_packet(""); |
| return; |
| } |
| |
| gdb_put_packet("E22"); |
| } |
| |
| static void handle_remove_bp(GArray *params, void *user_ctx) |
| { |
| int res; |
| |
| if (params->len != 3) { |
| gdb_put_packet("E22"); |
| return; |
| } |
| |
| res = gdb_breakpoint_remove(gdbserver_state.c_cpu, |
| gdb_get_cmd_param(params, 0)->val_ul, |
| gdb_get_cmd_param(params, 1)->val_ull, |
| gdb_get_cmd_param(params, 2)->val_ull); |
| if (res >= 0) { |
| gdb_put_packet("OK"); |
| return; |
| } else if (res == -ENOSYS) { |
| gdb_put_packet(""); |
| return; |
| } |
| |
| gdb_put_packet("E22"); |
| } |
| |
| /* |
| * handle_set/get_reg |
| * |
| * Older gdb are really dumb, and don't use 'G/g' if 'P/p' is available. |
| * This works, but can be very slow. Anything new enough to understand |
| * XML also knows how to use this properly. However to use this we |
| * need to define a local XML file as well as be talking to a |
| * reasonably modern gdb. Responding with an empty packet will cause |
| * the remote gdb to fallback to older methods. |
| */ |
| |
| static void handle_set_reg(GArray *params, void *user_ctx) |
| { |
| int reg_size; |
| |
| if (params->len != 2) { |
| gdb_put_packet("E22"); |
| return; |
| } |
| |
| reg_size = strlen(gdb_get_cmd_param(params, 1)->data) / 2; |
| gdb_hextomem(gdbserver_state.mem_buf, gdb_get_cmd_param(params, 1)->data, reg_size); |
| gdb_write_register(gdbserver_state.g_cpu, gdbserver_state.mem_buf->data, |
| gdb_get_cmd_param(params, 0)->val_ull); |
| gdb_put_packet("OK"); |
| } |
| |
| static void handle_get_reg(GArray *params, void *user_ctx) |
| { |
| int reg_size; |
| |
| if (!params->len) { |
| gdb_put_packet("E14"); |
| return; |
| } |
| |
| reg_size = gdb_read_register(gdbserver_state.g_cpu, |
| gdbserver_state.mem_buf, |
| gdb_get_cmd_param(params, 0)->val_ull); |
| if (!reg_size) { |
| gdb_put_packet("E14"); |
| return; |
| } else { |
| g_byte_array_set_size(gdbserver_state.mem_buf, reg_size); |
| } |
| |
| gdb_memtohex(gdbserver_state.str_buf, |
| gdbserver_state.mem_buf->data, reg_size); |
| gdb_put_strbuf(); |
| } |
| |
| static void handle_write_mem(GArray *params, void *user_ctx) |
| { |
| if (params->len != 3) { |
| gdb_put_packet("E22"); |
| return; |
| } |
| |
| /* gdb_hextomem() reads 2*len bytes */ |
| if (gdb_get_cmd_param(params, 1)->val_ull > |
| strlen(gdb_get_cmd_param(params, 2)->data) / 2) { |
| gdb_put_packet("E22"); |
| return; |
| } |
| |
| gdb_hextomem(gdbserver_state.mem_buf, gdb_get_cmd_param(params, 2)->data, |
| gdb_get_cmd_param(params, 1)->val_ull); |
| if (gdb_target_memory_rw_debug(gdbserver_state.g_cpu, |
| gdb_get_cmd_param(params, 0)->val_ull, |
| gdbserver_state.mem_buf->data, |
| gdbserver_state.mem_buf->len, true)) { |
| gdb_put_packet("E14"); |
| return; |
| } |
| |
| gdb_put_packet("OK"); |
| } |
| |
| static void handle_read_mem(GArray *params, void *user_ctx) |
| { |
| if (params->len != 2) { |
| gdb_put_packet("E22"); |
| return; |
| } |
| |
| /* gdb_memtohex() doubles the required space */ |
| if (gdb_get_cmd_param(params, 1)->val_ull > MAX_PACKET_LENGTH / 2) { |
| gdb_put_packet("E22"); |
| return; |
| } |
| |
| g_byte_array_set_size(gdbserver_state.mem_buf, |
| gdb_get_cmd_param(params, 1)->val_ull); |
| |
| if (gdb_target_memory_rw_debug(gdbserver_state.g_cpu, |
| gdb_get_cmd_param(params, 0)->val_ull, |
| gdbserver_state.mem_buf->data, |
| gdbserver_state.mem_buf->len, false)) { |
| gdb_put_packet("E14"); |
| return; |
| } |
| |
| gdb_memtohex(gdbserver_state.str_buf, gdbserver_state.mem_buf->data, |
| gdbserver_state.mem_buf->len); |
| gdb_put_strbuf(); |
| } |
| |
| static void handle_write_all_regs(GArray *params, void *user_ctx) |
| { |
| int reg_id; |
| size_t len; |
| uint8_t *registers; |
| int reg_size; |
| |
| if (!params->len) { |
| return; |
| } |
| |
| cpu_synchronize_state(gdbserver_state.g_cpu); |
| len = strlen(gdb_get_cmd_param(params, 0)->data) / 2; |
| gdb_hextomem(gdbserver_state.mem_buf, gdb_get_cmd_param(params, 0)->data, len); |
| registers = gdbserver_state.mem_buf->data; |
| for (reg_id = 0; |
| reg_id < gdbserver_state.g_cpu->gdb_num_g_regs && len > 0; |
| reg_id++) { |
| reg_size = gdb_write_register(gdbserver_state.g_cpu, registers, reg_id); |
| len -= reg_size; |
| registers += reg_size; |
| } |
| gdb_put_packet("OK"); |
| } |
| |
| static void handle_read_all_regs(GArray *params, void *user_ctx) |
| { |
| int reg_id; |
| size_t len; |
| |
| cpu_synchronize_state(gdbserver_state.g_cpu); |
| g_byte_array_set_size(gdbserver_state.mem_buf, 0); |
| len = 0; |
| for (reg_id = 0; reg_id < gdbserver_state.g_cpu->gdb_num_g_regs; reg_id++) { |
| len += gdb_read_register(gdbserver_state.g_cpu, |
| gdbserver_state.mem_buf, |
| reg_id); |
| } |
| g_assert(len == gdbserver_state.mem_buf->len); |
| |
| gdb_memtohex(gdbserver_state.str_buf, gdbserver_state.mem_buf->data, len); |
| gdb_put_strbuf(); |
| } |
| |
| |
| static void handle_step(GArray *params, void *user_ctx) |
| { |
| if (params->len) { |
| gdb_set_cpu_pc(gdb_get_cmd_param(params, 0)->val_ull); |
| } |
| |
| cpu_single_step(gdbserver_state.c_cpu, gdbserver_state.sstep_flags); |
| gdb_continue(); |
| } |
| |
| static void handle_backward(GArray *params, void *user_ctx) |
| { |
| if (!gdb_can_reverse()) { |
| gdb_put_packet("E22"); |
| } |
| if (params->len == 1) { |
| switch (gdb_get_cmd_param(params, 0)->opcode) { |
| case 's': |
| if (replay_reverse_step()) { |
| gdb_continue(); |
| } else { |
| gdb_put_packet("E14"); |
| } |
| return; |
| case 'c': |
| if (replay_reverse_continue()) { |
| gdb_continue(); |
| } else { |
| gdb_put_packet("E14"); |
| } |
| return; |
| } |
| } |
| |
| /* Default invalid command */ |
| gdb_put_packet(""); |
| } |
| |
| static void handle_v_cont_query(GArray *params, void *user_ctx) |
| { |
| gdb_put_packet("vCont;c;C;s;S"); |
| } |
| |
| static void handle_v_cont(GArray *params, void *user_ctx) |
| { |
| int res; |
| |
| if (!params->len) { |
| return; |
| } |
| |
| res = gdb_handle_vcont(gdb_get_cmd_param(params, 0)->data); |
| if ((res == -EINVAL) || (res == -ERANGE)) { |
| gdb_put_packet("E22"); |
| } else if (res) { |
| gdb_put_packet(""); |
| } |
| } |
| |
| static void handle_v_attach(GArray *params, void *user_ctx) |
| { |
| GDBProcess *process; |
| CPUState *cpu; |
| |
| g_string_assign(gdbserver_state.str_buf, "E22"); |
| if (!params->len) { |
| goto cleanup; |
| } |
| |
| process = gdb_get_process(gdb_get_cmd_param(params, 0)->val_ul); |
| if (!process) { |
| goto cleanup; |
| } |
| |
| cpu = gdb_get_first_cpu_in_process(process); |
| if (!cpu) { |
| goto cleanup; |
| } |
| |
| process->attached = true; |
| gdbserver_state.g_cpu = cpu; |
| gdbserver_state.c_cpu = cpu; |
| |
| if (gdbserver_state.allow_stop_reply) { |
| g_string_printf(gdbserver_state.str_buf, "T%02xthread:", GDB_SIGNAL_TRAP); |
| gdb_append_thread_id(cpu, gdbserver_state.str_buf); |
| g_string_append_c(gdbserver_state.str_buf, ';'); |
| gdbserver_state.allow_stop_reply = false; |
| cleanup: |
| gdb_put_strbuf(); |
| } |
| } |
| |
| static void handle_v_kill(GArray *params, void *user_ctx) |
| { |
| /* Kill the target */ |
| gdb_put_packet("OK"); |
| error_report("QEMU: Terminated via GDBstub"); |
| gdb_exit(0); |
| gdb_qemu_exit(0); |
| } |
| |
| static const GdbCmdParseEntry gdb_v_commands_table[] = { |
| /* Order is important if has same prefix */ |
| { |
| .handler = handle_v_cont_query, |
| .cmd = "Cont?", |
| .cmd_startswith = true |
| }, |
| { |
| .handler = handle_v_cont, |
| .cmd = "Cont", |
| .cmd_startswith = true, |
| .allow_stop_reply = true, |
| .schema = "s0" |
| }, |
| { |
| .handler = handle_v_attach, |
| .cmd = "Attach;", |
| .cmd_startswith = true, |
| .allow_stop_reply = true, |
| .schema = "l0" |
| }, |
| { |
| .handler = handle_v_kill, |
| .cmd = "Kill;", |
| .cmd_startswith = true |
| }, |
| #ifdef CONFIG_USER_ONLY |
| /* |
| * Host I/O Packets. See [1] for details. |
| * [1] https://sourceware.org/gdb/onlinedocs/gdb/Host-I_002fO-Packets.html |
| */ |
| { |
| .handler = gdb_handle_v_file_open, |
| .cmd = "File:open:", |
| .cmd_startswith = true, |
| .schema = "s,L,L0" |
| }, |
| { |
| .handler = gdb_handle_v_file_close, |
| .cmd = "File:close:", |
| .cmd_startswith = true, |
| .schema = "l0" |
| }, |
| { |
| .handler = gdb_handle_v_file_pread, |
| .cmd = "File:pread:", |
| .cmd_startswith = true, |
| .schema = "l,L,L0" |
| }, |
| { |
| .handler = gdb_handle_v_file_readlink, |
| .cmd = "File:readlink:", |
| .cmd_startswith = true, |
| .schema = "s0" |
| }, |
| #endif |
| }; |
| |
| static void handle_v_commands(GArray *params, void *user_ctx) |
| { |
| if (!params->len) { |
| return; |
| } |
| |
| if (!process_string_cmd(gdb_get_cmd_param(params, 0)->data, |
| gdb_v_commands_table, |
| ARRAY_SIZE(gdb_v_commands_table))) { |
| gdb_put_packet(""); |
| } |
| } |
| |
| static void handle_query_qemu_sstepbits(GArray *params, void *user_ctx) |
| { |
| g_string_printf(gdbserver_state.str_buf, "ENABLE=%x", SSTEP_ENABLE); |
| |
| if (gdbserver_state.supported_sstep_flags & SSTEP_NOIRQ) { |
| g_string_append_printf(gdbserver_state.str_buf, ",NOIRQ=%x", |
| SSTEP_NOIRQ); |
| } |
| |
| if (gdbserver_state.supported_sstep_flags & SSTEP_NOTIMER) { |
| g_string_append_printf(gdbserver_state.str_buf, ",NOTIMER=%x", |
| SSTEP_NOTIMER); |
| } |
| |
| gdb_put_strbuf(); |
| } |
| |
| static void handle_set_qemu_sstep(GArray *params, void *user_ctx) |
| { |
| int new_sstep_flags; |
| |
| if (!params->len) { |
| return; |
| } |
| |
| new_sstep_flags = gdb_get_cmd_param(params, 0)->val_ul; |
| |
| if (new_sstep_flags & ~gdbserver_state.supported_sstep_flags) { |
| gdb_put_packet("E22"); |
| return; |
| } |
| |
| gdbserver_state.sstep_flags = new_sstep_flags; |
| gdb_put_packet("OK"); |
| } |
| |
| static void handle_query_qemu_sstep(GArray *params, void *user_ctx) |
| { |
| g_string_printf(gdbserver_state.str_buf, "0x%x", |
| gdbserver_state.sstep_flags); |
| gdb_put_strbuf(); |
| } |
| |
| static void handle_query_curr_tid(GArray *params, void *user_ctx) |
| { |
| CPUState *cpu; |
| GDBProcess *process; |
| |
| /* |
| * "Current thread" remains vague in the spec, so always return |
| * the first thread of the current process (gdb returns the |
| * first thread). |
| */ |
| process = gdb_get_cpu_process(gdbserver_state.g_cpu); |
| cpu = gdb_get_first_cpu_in_process(process); |
| g_string_assign(gdbserver_state.str_buf, "QC"); |
| gdb_append_thread_id(cpu, gdbserver_state.str_buf); |
| gdb_put_strbuf(); |
| } |
| |
| static void handle_query_threads(GArray *params, void *user_ctx) |
| { |
| if (!gdbserver_state.query_cpu) { |
| gdb_put_packet("l"); |
| return; |
| } |
| |
| g_string_assign(gdbserver_state.str_buf, "m"); |
| gdb_append_thread_id(gdbserver_state.query_cpu, gdbserver_state.str_buf); |
| gdb_put_strbuf(); |
| gdbserver_state.query_cpu = gdb_next_attached_cpu(gdbserver_state.query_cpu); |
| } |
| |
| static void handle_query_first_threads(GArray *params, void *user_ctx) |
| { |
| gdbserver_state.query_cpu = gdb_first_attached_cpu(); |
| handle_query_threads(params, user_ctx); |
| } |
| |
| static void handle_query_thread_extra(GArray *params, void *user_ctx) |
| { |
| g_autoptr(GString) rs = g_string_new(NULL); |
| CPUState *cpu; |
| |
| if (!params->len || |
| gdb_get_cmd_param(params, 0)->thread_id.kind == GDB_READ_THREAD_ERR) { |
| gdb_put_packet("E22"); |
| return; |
| } |
| |
| cpu = gdb_get_cpu(gdb_get_cmd_param(params, 0)->thread_id.pid, |
| gdb_get_cmd_param(params, 0)->thread_id.tid); |
| if (!cpu) { |
| return; |
| } |
| |
| cpu_synchronize_state(cpu); |
| |
| if (gdbserver_state.multiprocess && (gdbserver_state.process_num > 1)) { |
| /* Print the CPU model and name in multiprocess mode */ |
| ObjectClass *oc = object_get_class(OBJECT(cpu)); |
| const char *cpu_model = object_class_get_name(oc); |
| const char *cpu_name = |
| object_get_canonical_path_component(OBJECT(cpu)); |
| g_string_printf(rs, "%s %s [%s]", cpu_model, cpu_name, |
| cpu->halted ? "halted " : "running"); |
| } else { |
| g_string_printf(rs, "CPU#%d [%s]", cpu->cpu_index, |
| cpu->halted ? "halted " : "running"); |
| } |
| trace_gdbstub_op_extra_info(rs->str); |
| gdb_memtohex(gdbserver_state.str_buf, (uint8_t *)rs->str, rs->len); |
| gdb_put_strbuf(); |
| } |
| |
| |
| static char **extra_query_flags; |
| |
| void gdb_extend_qsupported_features(char *qflags) |
| { |
| if (!extra_query_flags) { |
| extra_query_flags = g_new0(char *, 2); |
| extra_query_flags[0] = g_strdup(qflags); |
| } else if (!g_strv_contains((const gchar * const *) extra_query_flags, |
| qflags)) { |
| int len = g_strv_length(extra_query_flags); |
| extra_query_flags = g_realloc_n(extra_query_flags, len + 2, |
| sizeof(char *)); |
| extra_query_flags[len] = g_strdup(qflags); |
| } |
| } |
| |
| static void handle_query_supported(GArray *params, void *user_ctx) |
| { |
| CPUClass *cc; |
| |
| g_string_printf(gdbserver_state.str_buf, "PacketSize=%x", MAX_PACKET_LENGTH); |
| cc = CPU_GET_CLASS(first_cpu); |
| if (cc->gdb_core_xml_file) { |
| g_string_append(gdbserver_state.str_buf, ";qXfer:features:read+"); |
| } |
| |
| if (gdb_can_reverse()) { |
| g_string_append(gdbserver_state.str_buf, |
| ";ReverseStep+;ReverseContinue+"); |
| } |
| |
| #if defined(CONFIG_USER_ONLY) |
| #if defined(CONFIG_LINUX) |
| if (get_task_state(gdbserver_state.c_cpu)) { |
| g_string_append(gdbserver_state.str_buf, ";qXfer:auxv:read+"); |
| } |
| g_string_append(gdbserver_state.str_buf, ";QCatchSyscalls+"); |
| |
| g_string_append(gdbserver_state.str_buf, ";qXfer:siginfo:read+"); |
| #endif |
| g_string_append(gdbserver_state.str_buf, ";qXfer:exec-file:read+"); |
| #endif |
| |
| if (params->len) { |
| const char *gdb_supported = gdb_get_cmd_param(params, 0)->data; |
| |
| if (strstr(gdb_supported, "multiprocess+")) { |
| gdbserver_state.multiprocess = true; |
| } |
| #if defined(CONFIG_USER_ONLY) |
| gdb_handle_query_supported_user(gdb_supported); |
| #endif |
| } |
| |
| g_string_append(gdbserver_state.str_buf, ";vContSupported+;multiprocess+"); |
| |
| if (extra_query_flags) { |
| int extras = g_strv_length(extra_query_flags); |
| for (int i = 0; i < extras; i++) { |
| g_string_append(gdbserver_state.str_buf, extra_query_flags[i]); |
| } |
| } |
| |
| gdb_put_strbuf(); |
| } |
| |
| static void handle_query_xfer_features(GArray *params, void *user_ctx) |
| { |
| GDBProcess *process; |
| CPUClass *cc; |
| unsigned long len, total_len, addr; |
| const char *xml; |
| const char *p; |
| |
| if (params->len < 3) { |
| gdb_put_packet("E22"); |
| return; |
| } |
| |
| process = gdb_get_cpu_process(gdbserver_state.g_cpu); |
| cc = CPU_GET_CLASS(gdbserver_state.g_cpu); |
| if (!cc->gdb_core_xml_file) { |
| gdb_put_packet(""); |
| return; |
| } |
| |
| p = gdb_get_cmd_param(params, 0)->data; |
| xml = get_feature_xml(p, &p, process); |
| if (!xml) { |
| gdb_put_packet("E00"); |
| return; |
| } |
| |
| addr = gdb_get_cmd_param(params, 1)->val_ul; |
| len = gdb_get_cmd_param(params, 2)->val_ul; |
| total_len = strlen(xml); |
| if (addr > total_len) { |
| gdb_put_packet("E00"); |
| return; |
| } |
| |
| if (len > (MAX_PACKET_LENGTH - 5) / 2) { |
| len = (MAX_PACKET_LENGTH - 5) / 2; |
| } |
| |
| if (len < total_len - addr) { |
| g_string_assign(gdbserver_state.str_buf, "m"); |
| gdb_memtox(gdbserver_state.str_buf, xml + addr, len); |
| } else { |
| g_string_assign(gdbserver_state.str_buf, "l"); |
| gdb_memtox(gdbserver_state.str_buf, xml + addr, total_len - addr); |
| } |
| |
| gdb_put_packet_binary(gdbserver_state.str_buf->str, |
| gdbserver_state.str_buf->len, true); |
| } |
| |
| static void handle_query_qemu_supported(GArray *params, void *user_ctx) |
| { |
| g_string_printf(gdbserver_state.str_buf, "sstepbits;sstep"); |
| #ifndef CONFIG_USER_ONLY |
| g_string_append(gdbserver_state.str_buf, ";PhyMemMode"); |
| #endif |
| gdb_put_strbuf(); |
| } |
| |
| static const GdbCmdParseEntry gdb_gen_query_set_common_table[] = { |
| /* Order is important if has same prefix */ |
| { |
| .handler = handle_query_qemu_sstepbits, |
| .cmd = "qemu.sstepbits", |
| }, |
| { |
| .handler = handle_query_qemu_sstep, |
| .cmd = "qemu.sstep", |
| }, |
| { |
| .handler = handle_set_qemu_sstep, |
| .cmd = "qemu.sstep=", |
| .cmd_startswith = true, |
| .schema = "l0" |
| }, |
| }; |
| |
| /** |
| * extend_table() - extend one of the command tables |
| * @table: the command table to extend (or NULL) |
| * @extensions: a list of GdbCmdParseEntry pointers |
| * |
| * The entries themselves should be pointers to static const |
| * GdbCmdParseEntry entries. If the entry is already in the table we |
| * skip adding it again. |
| * |
| * Returns (a potentially freshly allocated) GPtrArray of GdbCmdParseEntry |
| */ |
| static GPtrArray *extend_table(GPtrArray *table, GPtrArray *extensions) |
| { |
| if (!table) { |
| table = g_ptr_array_new(); |
| } |
| |
| for (int i = 0; i < extensions->len; i++) { |
| gpointer entry = g_ptr_array_index(extensions, i); |
| if (!g_ptr_array_find(table, entry, NULL)) { |
| g_ptr_array_add(table, entry); |
| } |
| } |
| |
| return table; |
| } |
| |
| /** |
| * process_extended_table() - run through an extended command table |
| * @table: the command table to check |
| * @data: parameters |
| * |
| * returns true if the command was found and executed |
| */ |
| static bool process_extended_table(GPtrArray *table, const char *data) |
| { |
| for (int i = 0; i < table->len; i++) { |
| const GdbCmdParseEntry *entry = g_ptr_array_index(table, i); |
| if (process_string_cmd(data, entry, 1)) { |
| return true; |
| } |
| } |
| return false; |
| } |
| |
| |
| /* Ptr to GdbCmdParseEntry */ |
| static GPtrArray *extended_query_table; |
| |
| void gdb_extend_query_table(GPtrArray *new_queries) |
| { |
| extended_query_table = extend_table(extended_query_table, new_queries); |
| } |
| |
| static const GdbCmdParseEntry gdb_gen_query_table[] = { |
| { |
| .handler = handle_query_curr_tid, |
| .cmd = "C", |
| }, |
| { |
| .handler = handle_query_threads, |
| .cmd = "sThreadInfo", |
| }, |
| { |
| .handler = handle_query_first_threads, |
| .cmd = "fThreadInfo", |
| }, |
| { |
| .handler = handle_query_thread_extra, |
| .cmd = "ThreadExtraInfo,", |
| .cmd_startswith = true, |
| .schema = "t0" |
| }, |
| #ifdef CONFIG_USER_ONLY |
| { |
| .handler = gdb_handle_query_offsets, |
| .cmd = "Offsets", |
| }, |
| #else |
| { |
| .handler = gdb_handle_query_rcmd, |
| .cmd = "Rcmd,", |
| .cmd_startswith = true, |
| .schema = "s0" |
| }, |
| #endif |
| { |
| .handler = handle_query_supported, |
| .cmd = "Supported:", |
| .cmd_startswith = true, |
| .schema = "s0" |
| }, |
| { |
| .handler = handle_query_supported, |
| .cmd = "Supported", |
| .schema = "s0" |
| }, |
| { |
| .handler = handle_query_xfer_features, |
| .cmd = "Xfer:features:read:", |
| .cmd_startswith = true, |
| .schema = "s:l,l0" |
| }, |
| #if defined(CONFIG_USER_ONLY) |
| #if defined(CONFIG_LINUX) |
| { |
| .handler = gdb_handle_query_xfer_auxv, |
| .cmd = "Xfer:auxv:read::", |
| .cmd_startswith = true, |
| .schema = "l,l0" |
| }, |
| { |
| .handler = gdb_handle_query_xfer_siginfo, |
| .cmd = "Xfer:siginfo:read::", |
| .cmd_startswith = true, |
| .schema = "l,l0" |
| }, |
| #endif |
| { |
| .handler = gdb_handle_query_xfer_exec_file, |
| .cmd = "Xfer:exec-file:read:", |
| .cmd_startswith = true, |
| .schema = "l:l,l0" |
| }, |
| #endif |
| { |
| .handler = gdb_handle_query_attached, |
| .cmd = "Attached:", |
| .cmd_startswith = true |
| }, |
| { |
| .handler = gdb_handle_query_attached, |
| .cmd = "Attached", |
| }, |
| { |
| .handler = handle_query_qemu_supported, |
| .cmd = "qemu.Supported", |
| }, |
| #ifndef CONFIG_USER_ONLY |
| { |
| .handler = gdb_handle_query_qemu_phy_mem_mode, |
| .cmd = "qemu.PhyMemMode", |
| }, |
| #endif |
| }; |
| |
| /* Ptr to GdbCmdParseEntry */ |
| static GPtrArray *extended_set_table; |
| |
| void gdb_extend_set_table(GPtrArray *new_set) |
| { |
| extended_set_table = extend_table(extended_set_table, new_set); |
| } |
| |
| static const GdbCmdParseEntry gdb_gen_set_table[] = { |
| /* Order is important if has same prefix */ |
| { |
| .handler = handle_set_qemu_sstep, |
| .cmd = "qemu.sstep:", |
| .cmd_startswith = true, |
| .schema = "l0" |
| }, |
| #ifndef CONFIG_USER_ONLY |
| { |
| .handler = gdb_handle_set_qemu_phy_mem_mode, |
| .cmd = "qemu.PhyMemMode:", |
| .cmd_startswith = true, |
| .schema = "l0" |
| }, |
| #endif |
| #if defined(CONFIG_USER_ONLY) |
| { |
| .handler = gdb_handle_set_catch_syscalls, |
| .cmd = "CatchSyscalls:", |
| .cmd_startswith = true, |
| .schema = "s0", |
| }, |
| #endif |
| }; |
| |
| static void handle_gen_query(GArray *params, void *user_ctx) |
| { |
| const char *data; |
| |
| if (!params->len) { |
| return; |
| } |
| |
| data = gdb_get_cmd_param(params, 0)->data; |
| |
| if (process_string_cmd(data, |
| gdb_gen_query_set_common_table, |
| ARRAY_SIZE(gdb_gen_query_set_common_table))) { |
| return; |
| } |
| |
| if (process_string_cmd(data, |
| gdb_gen_query_table, |
| ARRAY_SIZE(gdb_gen_query_table))) { |
| return; |
| } |
| |
| if (extended_query_table && |
| process_extended_table(extended_query_table, data)) { |
| return; |
| } |
| |
| /* Can't handle query, return Empty response. */ |
| gdb_put_packet(""); |
| } |
| |
| static void handle_gen_set(GArray *params, void *user_ctx) |
| { |
| const char *data; |
| |
| if (!params->len) { |
| return; |
| } |
| |
| data = gdb_get_cmd_param(params, 0)->data; |
| |
| if (process_string_cmd(data, |
| gdb_gen_query_set_common_table, |
| ARRAY_SIZE(gdb_gen_query_set_common_table))) { |
| return; |
| } |
| |
| if (process_string_cmd(data, |
| gdb_gen_set_table, |
| ARRAY_SIZE(gdb_gen_set_table))) { |
| return; |
| } |
| |
| if (extended_set_table && |
| process_extended_table(extended_set_table, data)) { |
| return; |
| } |
| |
| /* Can't handle set, return Empty response. */ |
| gdb_put_packet(""); |
| } |
| |
| static void handle_target_halt(GArray *params, void *user_ctx) |
| { |
| if (gdbserver_state.allow_stop_reply) { |
| g_string_printf(gdbserver_state.str_buf, "T%02xthread:", GDB_SIGNAL_TRAP); |
| gdb_append_thread_id(gdbserver_state.c_cpu, gdbserver_state.str_buf); |
| g_string_append_c(gdbserver_state.str_buf, ';'); |
| gdb_put_strbuf(); |
| gdbserver_state.allow_stop_reply = false; |
| } |
| /* |
| * Remove all the breakpoints when this query is issued, |
| * because gdb is doing an initial connect and the state |
| * should be cleaned up. |
| */ |
| gdb_breakpoint_remove_all(gdbserver_state.c_cpu); |
| } |
| |
| static int gdb_handle_packet(const char *line_buf) |
| { |
| const GdbCmdParseEntry *cmd_parser = NULL; |
| |
| trace_gdbstub_io_command(line_buf); |
| |
| switch (line_buf[0]) { |
| case '!': |
| gdb_put_packet("OK"); |
| break; |
| case '?': |
| { |
| static const GdbCmdParseEntry target_halted_cmd_desc = { |
| .handler = handle_target_halt, |
| .cmd = "?", |
| .cmd_startswith = true, |
| .allow_stop_reply = true, |
| }; |
| cmd_parser = &target_halted_cmd_desc; |
| } |
| break; |
| case 'c': |
| { |
| static const GdbCmdParseEntry continue_cmd_desc = { |
| .handler = handle_continue, |
| .cmd = "c", |
| .cmd_startswith = true, |
| .allow_stop_reply = true, |
| .schema = "L0" |
| }; |
| cmd_parser = &continue_cmd_desc; |
| } |
| break; |
| case 'C': |
| { |
| static const GdbCmdParseEntry cont_with_sig_cmd_desc = { |
| .handler = handle_cont_with_sig, |
| .cmd = "C", |
| .cmd_startswith = true, |
| .allow_stop_reply = true, |
| .schema = "l0" |
| }; |
| cmd_parser = &cont_with_sig_cmd_desc; |
| } |
| break; |
| case 'v': |
| { |
| static const GdbCmdParseEntry v_cmd_desc = { |
| .handler = handle_v_commands, |
| .cmd = "v", |
| .cmd_startswith = true, |
| .schema = "s0" |
| }; |
| cmd_parser = &v_cmd_desc; |
| } |
| break; |
| case 'k': |
| /* Kill the target */ |
| error_report("QEMU: Terminated via GDBstub"); |
| gdb_exit(0); |
| gdb_qemu_exit(0); |
| break; |
| case 'D': |
| { |
| static const GdbCmdParseEntry detach_cmd_desc = { |
| .handler = handle_detach, |
| .cmd = "D", |
| .cmd_startswith = true, |
| .schema = "?.l0" |
| }; |
| cmd_parser = &detach_cmd_desc; |
| } |
| break; |
| case 's': |
| { |
| static const GdbCmdParseEntry step_cmd_desc = { |
| .handler = handle_step, |
| .cmd = "s", |
| .cmd_startswith = true, |
| .allow_stop_reply = true, |
| .schema = "L0" |
| }; |
| cmd_parser = &step_cmd_desc; |
| } |
| break; |
| case 'b': |
| { |
| static const GdbCmdParseEntry backward_cmd_desc = { |
| .handler = handle_backward, |
| .cmd = "b", |
| .cmd_startswith = true, |
| .allow_stop_reply = true, |
| .schema = "o0" |
| }; |
| cmd_parser = &backward_cmd_desc; |
| } |
| break; |
| case 'F': |
| { |
| static const GdbCmdParseEntry file_io_cmd_desc = { |
| .handler = gdb_handle_file_io, |
| .cmd = "F", |
| .cmd_startswith = true, |
| .schema = "L,L,o0" |
| }; |
| cmd_parser = &file_io_cmd_desc; |
| } |
| break; |
| case 'g': |
| { |
| static const GdbCmdParseEntry read_all_regs_cmd_desc = { |
| .handler = handle_read_all_regs, |
| .cmd = "g", |
| .cmd_startswith = true |
| }; |
| cmd_parser = &read_all_regs_cmd_desc; |
| } |
| break; |
| case 'G': |
| { |
| static const GdbCmdParseEntry write_all_regs_cmd_desc = { |
| .handler = handle_write_all_regs, |
| .cmd = "G", |
| .cmd_startswith = true, |
| .schema = "s0" |
| }; |
| cmd_parser = &write_all_regs_cmd_desc; |
| } |
| break; |
| case 'm': |
| { |
| static const GdbCmdParseEntry read_mem_cmd_desc = { |
| .handler = handle_read_mem, |
| .cmd = "m", |
| .cmd_startswith = true, |
| .schema = "L,L0" |
| }; |
| cmd_parser = &read_mem_cmd_desc; |
| } |
| break; |
| case 'M': |
| { |
| static const GdbCmdParseEntry write_mem_cmd_desc = { |
| .handler = handle_write_mem, |
| .cmd = "M", |
| .cmd_startswith = true, |
| .schema = "L,L:s0" |
| }; |
| cmd_parser = &write_mem_cmd_desc; |
| } |
| break; |
| case 'p': |
| { |
| static const GdbCmdParseEntry get_reg_cmd_desc = { |
| .handler = handle_get_reg, |
| .cmd = "p", |
| .cmd_startswith = true, |
| .schema = "L0" |
| }; |
| cmd_parser = &get_reg_cmd_desc; |
| } |
| break; |
| case 'P': |
| { |
| static const GdbCmdParseEntry set_reg_cmd_desc = { |
| .handler = handle_set_reg, |
| .cmd = "P", |
| .cmd_startswith = true, |
| .schema = "L?s0" |
| }; |
| cmd_parser = &set_reg_cmd_desc; |
| } |
| break; |
| case 'Z': |
| { |
| static const GdbCmdParseEntry insert_bp_cmd_desc = { |
| .handler = handle_insert_bp, |
| .cmd = "Z", |
| .cmd_startswith = true, |
| .schema = "l?L?L0" |
| }; |
| cmd_parser = &insert_bp_cmd_desc; |
| } |
| break; |
| case 'z': |
| { |
| static const GdbCmdParseEntry remove_bp_cmd_desc = { |
| .handler = handle_remove_bp, |
| .cmd = "z", |
| .cmd_startswith = true, |
| .schema = "l?L?L0" |
| }; |
| cmd_parser = &remove_bp_cmd_desc; |
| } |
| break; |
| case 'H': |
| { |
| static const GdbCmdParseEntry set_thread_cmd_desc = { |
| .handler = handle_set_thread, |
| .cmd = "H", |
| .cmd_startswith = true, |
| .schema = "o.t0" |
| }; |
| cmd_parser = &set_thread_cmd_desc; |
| } |
| break; |
| case 'T': |
| { |
| static const GdbCmdParseEntry thread_alive_cmd_desc = { |
| .handler = handle_thread_alive, |
| .cmd = "T", |
| .cmd_startswith = true, |
| .schema = "t0" |
| }; |
| cmd_parser = &thread_alive_cmd_desc; |
| } |
| break; |
| case 'q': |
| { |
| static const GdbCmdParseEntry gen_query_cmd_desc = { |
| .handler = handle_gen_query, |
| .cmd = "q", |
| .cmd_startswith = true, |
| .schema = "s0" |
| }; |
| cmd_parser = &gen_query_cmd_desc; |
| } |
| break; |
| case 'Q': |
| { |
| static const GdbCmdParseEntry gen_set_cmd_desc = { |
| .handler = handle_gen_set, |
| .cmd = "Q", |
| .cmd_startswith = true, |
| .schema = "s0" |
| }; |
| cmd_parser = &gen_set_cmd_desc; |
| } |
| break; |
| default: |
| /* put empty packet */ |
| gdb_put_packet(""); |
| break; |
| } |
| |
| if (cmd_parser) { |
| run_cmd_parser(line_buf, cmd_parser); |
| } |
| |
| return RS_IDLE; |
| } |
| |
| void gdb_set_stop_cpu(CPUState *cpu) |
| { |
| GDBProcess *p = gdb_get_cpu_process(cpu); |
| |
| if (!p->attached) { |
| /* |
| * Having a stop CPU corresponding to a process that is not attached |
| * confuses GDB. So we ignore the request. |
| */ |
| return; |
| } |
| |
| gdbserver_state.c_cpu = cpu; |
| gdbserver_state.g_cpu = cpu; |
| } |
| |
| void gdb_read_byte(uint8_t ch) |
| { |
| uint8_t reply; |
| |
| gdbserver_state.allow_stop_reply = false; |
| #ifndef CONFIG_USER_ONLY |
| if (gdbserver_state.last_packet->len) { |
| /* Waiting for a response to the last packet. If we see the start |
| of a new command then abandon the previous response. */ |
| if (ch == '-') { |
| trace_gdbstub_err_got_nack(); |
| gdb_put_buffer(gdbserver_state.last_packet->data, |
| gdbserver_state.last_packet->len); |
| } else if (ch == '+') { |
| trace_gdbstub_io_got_ack(); |
| } else { |
| trace_gdbstub_io_got_unexpected(ch); |
| } |
| |
| if (ch == '+' || ch == '$') { |
| g_byte_array_set_size(gdbserver_state.last_packet, 0); |
| } |
| if (ch != '$') |
| return; |
| } |
| if (runstate_is_running()) { |
| /* |
| * When the CPU is running, we cannot do anything except stop |
| * it when receiving a char. This is expected on a Ctrl-C in the |
| * gdb client. Because we are in all-stop mode, gdb sends a |
| * 0x03 byte which is not a usual packet, so we handle it specially |
| * here, but it does expect a stop reply. |
| */ |
| if (ch != 0x03) { |
| trace_gdbstub_err_unexpected_runpkt(ch); |
| } else { |
| gdbserver_state.allow_stop_reply = true; |
| } |
| vm_stop(RUN_STATE_PAUSED); |
| } else |
| #endif |
| { |
| switch(gdbserver_state.state) { |
| case RS_IDLE: |
| if (ch == '$') { |
| /* start of command packet */ |
| gdbserver_state.line_buf_index = 0; |
| gdbserver_state.line_sum = 0; |
| gdbserver_state.state = RS_GETLINE; |
| } else if (ch == '+') { |
| /* |
| * do nothing, gdb may preemptively send out ACKs on |
| * initial connection |
| */ |
| } else { |
| trace_gdbstub_err_garbage(ch); |
| } |
| break; |
| case RS_GETLINE: |
| if (ch == '}') { |
| /* start escape sequence */ |
| gdbserver_state.state = RS_GETLINE_ESC; |
| gdbserver_state.line_sum += ch; |
| } else if (ch == '*') { |
| /* start run length encoding sequence */ |
| gdbserver_state.state = RS_GETLINE_RLE; |
| gdbserver_state.line_sum += ch; |
| } else if (ch == '#') { |
| /* end of command, start of checksum*/ |
| gdbserver_state.state = RS_CHKSUM1; |
| } else if (gdbserver_state.line_buf_index >= sizeof(gdbserver_state.line_buf) - 1) { |
| trace_gdbstub_err_overrun(); |
| gdbserver_state.state = RS_IDLE; |
| } else { |
| /* unescaped command character */ |
| gdbserver_state.line_buf[gdbserver_state.line_buf_index++] = ch; |
| gdbserver_state.line_sum += ch; |
| } |
| break; |
| case RS_GETLINE_ESC: |
| if (ch == '#') { |
| /* unexpected end of command in escape sequence */ |
| gdbserver_state.state = RS_CHKSUM1; |
| } else if (gdbserver_state.line_buf_index >= sizeof(gdbserver_state.line_buf) - 1) { |
| /* command buffer overrun */ |
| trace_gdbstub_err_overrun(); |
| gdbserver_state.state = RS_IDLE; |
| } else { |
| /* parse escaped character and leave escape state */ |
| gdbserver_state.line_buf[gdbserver_state.line_buf_index++] = ch ^ 0x20; |
| gdbserver_state.line_sum += ch; |
| gdbserver_state.state = RS_GETLINE; |
| } |
| break; |
| case RS_GETLINE_RLE: |
| /* |
| * Run-length encoding is explained in "Debugging with GDB / |
| * Appendix E GDB Remote Serial Protocol / Overview". |
| */ |
| if (ch < ' ' || ch == '#' || ch == '$' || ch > 126) { |
| /* invalid RLE count encoding */ |
| trace_gdbstub_err_invalid_repeat(ch); |
| gdbserver_state.state = RS_GETLINE; |
| } else { |
| /* decode repeat length */ |
| int repeat = ch - ' ' + 3; |
| if (gdbserver_state.line_buf_index + repeat >= sizeof(gdbserver_state.line_buf) - 1) { |
| /* that many repeats would overrun the command buffer */ |
| trace_gdbstub_err_overrun(); |
| gdbserver_state.state = RS_IDLE; |
| } else if (gdbserver_state.line_buf_index < 1) { |
| /* got a repeat but we have nothing to repeat */ |
| trace_gdbstub_err_invalid_rle(); |
| gdbserver_state.state = RS_GETLINE; |
| } else { |
| /* repeat the last character */ |
| memset(gdbserver_state.line_buf + gdbserver_state.line_buf_index, |
| gdbserver_state.line_buf[gdbserver_state.line_buf_index - 1], repeat); |
| gdbserver_state.line_buf_index += repeat; |
| gdbserver_state.line_sum += ch; |
| gdbserver_state.state = RS_GETLINE; |
| } |
| } |
| break; |
| case RS_CHKSUM1: |
| /* get high hex digit of checksum */ |
| if (!isxdigit(ch)) { |
| trace_gdbstub_err_checksum_invalid(ch); |
| gdbserver_state.state = RS_GETLINE; |
| break; |
| } |
| gdbserver_state.line_buf[gdbserver_state.line_buf_index] = '\0'; |
| gdbserver_state.line_csum = fromhex(ch) << 4; |
| gdbserver_state.state = RS_CHKSUM2; |
| break; |
| case RS_CHKSUM2: |
| /* get low hex digit of checksum */ |
| if (!isxdigit(ch)) { |
| trace_gdbstub_err_checksum_invalid(ch); |
| gdbserver_state.state = RS_GETLINE; |
| break; |
| } |
| gdbserver_state.line_csum |= fromhex(ch); |
| |
| if (gdbserver_state.line_csum != (gdbserver_state.line_sum & 0xff)) { |
| trace_gdbstub_err_checksum_incorrect(gdbserver_state.line_sum, gdbserver_state.line_csum); |
| /* send NAK reply */ |
| reply = '-'; |
| gdb_put_buffer(&reply, 1); |
| gdbserver_state.state = RS_IDLE; |
| } else { |
| /* send ACK reply */ |
| reply = '+'; |
| gdb_put_buffer(&reply, 1); |
| gdbserver_state.state = gdb_handle_packet(gdbserver_state.line_buf); |
| } |
| break; |
| default: |
| abort(); |
| } |
| } |
| } |
| |
| /* |
| * Create the process that will contain all the "orphan" CPUs (that are not |
| * part of a CPU cluster). Note that if this process contains no CPUs, it won't |
| * be attachable and thus will be invisible to the user. |
| */ |
| void gdb_create_default_process(GDBState *s) |
| { |
| GDBProcess *process; |
| int pid; |
| |
| #ifdef CONFIG_USER_ONLY |
| assert(gdbserver_state.process_num == 0); |
| pid = getpid(); |
| #else |
| if (gdbserver_state.process_num) { |
| pid = s->processes[s->process_num - 1].pid; |
| } else { |
| pid = 0; |
| } |
| /* We need an available PID slot for this process */ |
| assert(pid < UINT32_MAX); |
| pid++; |
| #endif |
| |
| s->processes = g_renew(GDBProcess, s->processes, ++s->process_num); |
| process = &s->processes[s->process_num - 1]; |
| process->pid = pid; |
| process->attached = false; |
| process->target_xml = NULL; |
| } |
| |
