| /* |
| * QEMU Guest Agent |
| * |
| * Copyright IBM Corp. 2011 |
| * |
| * Authors: |
| * Adam Litke <aglitke@linux.vnet.ibm.com> |
| * Michael Roth <mdroth@linux.vnet.ibm.com> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| */ |
| #include <stdlib.h> |
| #include <stdio.h> |
| #include <stdbool.h> |
| #include <glib.h> |
| #include <getopt.h> |
| #include <glib/gstdio.h> |
| #ifndef _WIN32 |
| #include <syslog.h> |
| #include <sys/wait.h> |
| #include <sys/stat.h> |
| #endif |
| #include "qapi/qmp/json-streamer.h" |
| #include "qapi/qmp/json-parser.h" |
| #include "qapi/qmp/qint.h" |
| #include "qapi/qmp/qjson.h" |
| #include "qga/guest-agent-core.h" |
| #include "qemu/module.h" |
| #include "signal.h" |
| #include "qapi/qmp/qerror.h" |
| #include "qapi/qmp/dispatch.h" |
| #include "qga/channel.h" |
| #include "qemu/bswap.h" |
| #ifdef _WIN32 |
| #include "qga/service-win32.h" |
| #include "qga/vss-win32.h" |
| #endif |
| #ifdef __linux__ |
| #include <linux/fs.h> |
| #ifdef FIFREEZE |
| #define CONFIG_FSFREEZE |
| #endif |
| #endif |
| |
| #ifndef _WIN32 |
| #define QGA_VIRTIO_PATH_DEFAULT "/dev/virtio-ports/org.qemu.guest_agent.0" |
| #define QGA_STATE_RELATIVE_DIR "run" |
| #define QGA_SERIAL_PATH_DEFAULT "/dev/ttyS0" |
| #else |
| #define QGA_VIRTIO_PATH_DEFAULT "\\\\.\\Global\\org.qemu.guest_agent.0" |
| #define QGA_STATE_RELATIVE_DIR "qemu-ga" |
| #define QGA_SERIAL_PATH_DEFAULT "COM1" |
| #endif |
| #ifdef CONFIG_FSFREEZE |
| #define QGA_FSFREEZE_HOOK_DEFAULT CONFIG_QEMU_CONFDIR "/fsfreeze-hook" |
| #endif |
| #define QGA_SENTINEL_BYTE 0xFF |
| |
| static struct { |
| const char *state_dir; |
| const char *pidfile; |
| } dfl_pathnames; |
| |
| typedef struct GAPersistentState { |
| #define QGA_PSTATE_DEFAULT_FD_COUNTER 1000 |
| int64_t fd_counter; |
| } GAPersistentState; |
| |
| struct GAState { |
| JSONMessageParser parser; |
| GMainLoop *main_loop; |
| GAChannel *channel; |
| bool virtio; /* fastpath to check for virtio to deal with poll() quirks */ |
| GACommandState *command_state; |
| GLogLevelFlags log_level; |
| FILE *log_file; |
| bool logging_enabled; |
| #ifdef _WIN32 |
| GAService service; |
| #endif |
| bool delimit_response; |
| bool frozen; |
| GList *blacklist; |
| const char *state_filepath_isfrozen; |
| struct { |
| const char *log_filepath; |
| const char *pid_filepath; |
| } deferred_options; |
| #ifdef CONFIG_FSFREEZE |
| const char *fsfreeze_hook; |
| #endif |
| const gchar *pstate_filepath; |
| GAPersistentState pstate; |
| }; |
| |
| struct GAState *ga_state; |
| |
| /* commands that are safe to issue while filesystems are frozen */ |
| static const char *ga_freeze_whitelist[] = { |
| "guest-ping", |
| "guest-info", |
| "guest-sync", |
| "guest-sync-delimited", |
| "guest-fsfreeze-status", |
| "guest-fsfreeze-thaw", |
| NULL |
| }; |
| |
| #ifdef _WIN32 |
| DWORD WINAPI service_ctrl_handler(DWORD ctrl, DWORD type, LPVOID data, |
| LPVOID ctx); |
| VOID WINAPI service_main(DWORD argc, TCHAR *argv[]); |
| #endif |
| |
| static void |
| init_dfl_pathnames(void) |
| { |
| g_assert(dfl_pathnames.state_dir == NULL); |
| g_assert(dfl_pathnames.pidfile == NULL); |
| dfl_pathnames.state_dir = qemu_get_local_state_pathname( |
| QGA_STATE_RELATIVE_DIR); |
| dfl_pathnames.pidfile = qemu_get_local_state_pathname( |
| QGA_STATE_RELATIVE_DIR G_DIR_SEPARATOR_S "qemu-ga.pid"); |
| } |
| |
| static void quit_handler(int sig) |
| { |
| /* if we're frozen, don't exit unless we're absolutely forced to, |
| * because it's basically impossible for graceful exit to complete |
| * unless all log/pid files are on unfreezable filesystems. there's |
| * also a very likely chance killing the agent before unfreezing |
| * the filesystems is a mistake (or will be viewed as one later). |
| */ |
| if (ga_is_frozen(ga_state)) { |
| return; |
| } |
| g_debug("received signal num %d, quitting", sig); |
| |
| if (g_main_loop_is_running(ga_state->main_loop)) { |
| g_main_loop_quit(ga_state->main_loop); |
| } |
| } |
| |
| #ifndef _WIN32 |
| static gboolean register_signal_handlers(void) |
| { |
| struct sigaction sigact; |
| int ret; |
| |
| memset(&sigact, 0, sizeof(struct sigaction)); |
| sigact.sa_handler = quit_handler; |
| |
| ret = sigaction(SIGINT, &sigact, NULL); |
| if (ret == -1) { |
| g_error("error configuring signal handler: %s", strerror(errno)); |
| } |
| ret = sigaction(SIGTERM, &sigact, NULL); |
| if (ret == -1) { |
| g_error("error configuring signal handler: %s", strerror(errno)); |
| } |
| |
| return true; |
| } |
| |
| /* TODO: use this in place of all post-fork() fclose(std*) callers */ |
| void reopen_fd_to_null(int fd) |
| { |
| int nullfd; |
| |
| nullfd = open("/dev/null", O_RDWR); |
| if (nullfd < 0) { |
| return; |
| } |
| |
| dup2(nullfd, fd); |
| |
| if (nullfd != fd) { |
| close(nullfd); |
| } |
| } |
| #endif |
| |
| static void usage(const char *cmd) |
| { |
| printf( |
| "Usage: %s [-m <method> -p <path>] [<options>]\n" |
| "QEMU Guest Agent %s\n" |
| "\n" |
| " -m, --method transport method: one of unix-listen, virtio-serial, or\n" |
| " isa-serial (virtio-serial is the default)\n" |
| " -p, --path device/socket path (the default for virtio-serial is:\n" |
| " %s,\n" |
| " the default for isa-serial is:\n" |
| " %s)\n" |
| " -l, --logfile set logfile path, logs to stderr by default\n" |
| " -f, --pidfile specify pidfile (default is %s)\n" |
| #ifdef CONFIG_FSFREEZE |
| " -F, --fsfreeze-hook\n" |
| " enable fsfreeze hook. Accepts an optional argument that\n" |
| " specifies script to run on freeze/thaw. Script will be\n" |
| " called with 'freeze'/'thaw' arguments accordingly.\n" |
| " (default is %s)\n" |
| " If using -F with an argument, do not follow -F with a\n" |
| " space.\n" |
| " (for example: -F/var/run/fsfreezehook.sh)\n" |
| #endif |
| " -t, --statedir specify dir to store state information (absolute paths\n" |
| " only, default is %s)\n" |
| " -v, --verbose log extra debugging information\n" |
| " -V, --version print version information and exit\n" |
| " -d, --daemonize become a daemon\n" |
| #ifdef _WIN32 |
| " -s, --service service commands: install, uninstall, vss-install, vss-uninstall\n" |
| #endif |
| " -b, --blacklist comma-separated list of RPCs to disable (no spaces, \"?\"\n" |
| " to list available RPCs)\n" |
| " -h, --help display this help and exit\n" |
| "\n" |
| "Report bugs to <mdroth@linux.vnet.ibm.com>\n" |
| , cmd, QEMU_VERSION, QGA_VIRTIO_PATH_DEFAULT, QGA_SERIAL_PATH_DEFAULT, |
| dfl_pathnames.pidfile, |
| #ifdef CONFIG_FSFREEZE |
| QGA_FSFREEZE_HOOK_DEFAULT, |
| #endif |
| dfl_pathnames.state_dir); |
| } |
| |
| static const char *ga_log_level_str(GLogLevelFlags level) |
| { |
| switch (level & G_LOG_LEVEL_MASK) { |
| case G_LOG_LEVEL_ERROR: |
| return "error"; |
| case G_LOG_LEVEL_CRITICAL: |
| return "critical"; |
| case G_LOG_LEVEL_WARNING: |
| return "warning"; |
| case G_LOG_LEVEL_MESSAGE: |
| return "message"; |
| case G_LOG_LEVEL_INFO: |
| return "info"; |
| case G_LOG_LEVEL_DEBUG: |
| return "debug"; |
| default: |
| return "user"; |
| } |
| } |
| |
| bool ga_logging_enabled(GAState *s) |
| { |
| return s->logging_enabled; |
| } |
| |
| void ga_disable_logging(GAState *s) |
| { |
| s->logging_enabled = false; |
| } |
| |
| void ga_enable_logging(GAState *s) |
| { |
| s->logging_enabled = true; |
| } |
| |
| static void ga_log(const gchar *domain, GLogLevelFlags level, |
| const gchar *msg, gpointer opaque) |
| { |
| GAState *s = opaque; |
| GTimeVal time; |
| const char *level_str = ga_log_level_str(level); |
| |
| if (!ga_logging_enabled(s)) { |
| return; |
| } |
| |
| level &= G_LOG_LEVEL_MASK; |
| #ifndef _WIN32 |
| if (domain && strcmp(domain, "syslog") == 0) { |
| syslog(LOG_INFO, "%s: %s", level_str, msg); |
| } else if (level & s->log_level) { |
| #else |
| if (level & s->log_level) { |
| #endif |
| g_get_current_time(&time); |
| fprintf(s->log_file, |
| "%lu.%lu: %s: %s\n", time.tv_sec, time.tv_usec, level_str, msg); |
| fflush(s->log_file); |
| } |
| } |
| |
| void ga_set_response_delimited(GAState *s) |
| { |
| s->delimit_response = true; |
| } |
| |
| static FILE *ga_open_logfile(const char *logfile) |
| { |
| FILE *f; |
| |
| f = fopen(logfile, "a"); |
| if (!f) { |
| return NULL; |
| } |
| |
| qemu_set_cloexec(fileno(f)); |
| return f; |
| } |
| |
| #ifndef _WIN32 |
| static bool ga_open_pidfile(const char *pidfile) |
| { |
| int pidfd; |
| char pidstr[32]; |
| |
| pidfd = qemu_open(pidfile, O_CREAT|O_WRONLY, S_IRUSR|S_IWUSR); |
| if (pidfd == -1 || lockf(pidfd, F_TLOCK, 0)) { |
| g_critical("Cannot lock pid file, %s", strerror(errno)); |
| if (pidfd != -1) { |
| close(pidfd); |
| } |
| return false; |
| } |
| |
| if (ftruncate(pidfd, 0)) { |
| g_critical("Failed to truncate pid file"); |
| goto fail; |
| } |
| snprintf(pidstr, sizeof(pidstr), "%d\n", getpid()); |
| if (write(pidfd, pidstr, strlen(pidstr)) != strlen(pidstr)) { |
| g_critical("Failed to write pid file"); |
| goto fail; |
| } |
| |
| /* keep pidfile open & locked forever */ |
| return true; |
| |
| fail: |
| unlink(pidfile); |
| close(pidfd); |
| return false; |
| } |
| #else /* _WIN32 */ |
| static bool ga_open_pidfile(const char *pidfile) |
| { |
| return true; |
| } |
| #endif |
| |
| static gint ga_strcmp(gconstpointer str1, gconstpointer str2) |
| { |
| return strcmp(str1, str2); |
| } |
| |
| /* disable commands that aren't safe for fsfreeze */ |
| static void ga_disable_non_whitelisted(QmpCommand *cmd, void *opaque) |
| { |
| bool whitelisted = false; |
| int i = 0; |
| const char *name = qmp_command_name(cmd); |
| |
| while (ga_freeze_whitelist[i] != NULL) { |
| if (strcmp(name, ga_freeze_whitelist[i]) == 0) { |
| whitelisted = true; |
| } |
| i++; |
| } |
| if (!whitelisted) { |
| g_debug("disabling command: %s", name); |
| qmp_disable_command(name); |
| } |
| } |
| |
| /* [re-]enable all commands, except those explicitly blacklisted by user */ |
| static void ga_enable_non_blacklisted(QmpCommand *cmd, void *opaque) |
| { |
| GList *blacklist = opaque; |
| const char *name = qmp_command_name(cmd); |
| |
| if (g_list_find_custom(blacklist, name, ga_strcmp) == NULL && |
| !qmp_command_is_enabled(cmd)) { |
| g_debug("enabling command: %s", name); |
| qmp_enable_command(name); |
| } |
| } |
| |
| static bool ga_create_file(const char *path) |
| { |
| int fd = open(path, O_CREAT | O_WRONLY, S_IWUSR | S_IRUSR); |
| if (fd == -1) { |
| g_warning("unable to open/create file %s: %s", path, strerror(errno)); |
| return false; |
| } |
| close(fd); |
| return true; |
| } |
| |
| static bool ga_delete_file(const char *path) |
| { |
| int ret = unlink(path); |
| if (ret == -1) { |
| g_warning("unable to delete file: %s: %s", path, strerror(errno)); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool ga_is_frozen(GAState *s) |
| { |
| return s->frozen; |
| } |
| |
| void ga_set_frozen(GAState *s) |
| { |
| if (ga_is_frozen(s)) { |
| return; |
| } |
| /* disable all non-whitelisted (for frozen state) commands */ |
| qmp_for_each_command(ga_disable_non_whitelisted, NULL); |
| g_warning("disabling logging due to filesystem freeze"); |
| ga_disable_logging(s); |
| s->frozen = true; |
| if (!ga_create_file(s->state_filepath_isfrozen)) { |
| g_warning("unable to create %s, fsfreeze may not function properly", |
| s->state_filepath_isfrozen); |
| } |
| } |
| |
| void ga_unset_frozen(GAState *s) |
| { |
| if (!ga_is_frozen(s)) { |
| return; |
| } |
| |
| /* if we delayed creation/opening of pid/log files due to being |
| * in a frozen state at start up, do it now |
| */ |
| if (s->deferred_options.log_filepath) { |
| s->log_file = ga_open_logfile(s->deferred_options.log_filepath); |
| if (!s->log_file) { |
| s->log_file = stderr; |
| } |
| s->deferred_options.log_filepath = NULL; |
| } |
| ga_enable_logging(s); |
| g_warning("logging re-enabled due to filesystem unfreeze"); |
| if (s->deferred_options.pid_filepath) { |
| if (!ga_open_pidfile(s->deferred_options.pid_filepath)) { |
| g_warning("failed to create/open pid file"); |
| } |
| s->deferred_options.pid_filepath = NULL; |
| } |
| |
| /* enable all disabled, non-blacklisted commands */ |
| qmp_for_each_command(ga_enable_non_blacklisted, s->blacklist); |
| s->frozen = false; |
| if (!ga_delete_file(s->state_filepath_isfrozen)) { |
| g_warning("unable to delete %s, fsfreeze may not function properly", |
| s->state_filepath_isfrozen); |
| } |
| } |
| |
| #ifdef CONFIG_FSFREEZE |
| const char *ga_fsfreeze_hook(GAState *s) |
| { |
| return s->fsfreeze_hook; |
| } |
| #endif |
| |
| static void become_daemon(const char *pidfile) |
| { |
| #ifndef _WIN32 |
| pid_t pid, sid; |
| |
| pid = fork(); |
| if (pid < 0) { |
| exit(EXIT_FAILURE); |
| } |
| if (pid > 0) { |
| exit(EXIT_SUCCESS); |
| } |
| |
| if (pidfile) { |
| if (!ga_open_pidfile(pidfile)) { |
| g_critical("failed to create pidfile"); |
| exit(EXIT_FAILURE); |
| } |
| } |
| |
| umask(S_IRWXG | S_IRWXO); |
| sid = setsid(); |
| if (sid < 0) { |
| goto fail; |
| } |
| if ((chdir("/")) < 0) { |
| goto fail; |
| } |
| |
| reopen_fd_to_null(STDIN_FILENO); |
| reopen_fd_to_null(STDOUT_FILENO); |
| reopen_fd_to_null(STDERR_FILENO); |
| return; |
| |
| fail: |
| if (pidfile) { |
| unlink(pidfile); |
| } |
| g_critical("failed to daemonize"); |
| exit(EXIT_FAILURE); |
| #endif |
| } |
| |
| static int send_response(GAState *s, QObject *payload) |
| { |
| const char *buf; |
| QString *payload_qstr, *response_qstr; |
| GIOStatus status; |
| |
| g_assert(payload && s->channel); |
| |
| payload_qstr = qobject_to_json(payload); |
| if (!payload_qstr) { |
| return -EINVAL; |
| } |
| |
| if (s->delimit_response) { |
| s->delimit_response = false; |
| response_qstr = qstring_new(); |
| qstring_append_chr(response_qstr, QGA_SENTINEL_BYTE); |
| qstring_append(response_qstr, qstring_get_str(payload_qstr)); |
| QDECREF(payload_qstr); |
| } else { |
| response_qstr = payload_qstr; |
| } |
| |
| qstring_append_chr(response_qstr, '\n'); |
| buf = qstring_get_str(response_qstr); |
| status = ga_channel_write_all(s->channel, buf, strlen(buf)); |
| QDECREF(response_qstr); |
| if (status != G_IO_STATUS_NORMAL) { |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static void process_command(GAState *s, QDict *req) |
| { |
| QObject *rsp = NULL; |
| int ret; |
| |
| g_assert(req); |
| g_debug("processing command"); |
| rsp = qmp_dispatch(QOBJECT(req)); |
| if (rsp) { |
| ret = send_response(s, rsp); |
| if (ret) { |
| g_warning("error sending response: %s", strerror(ret)); |
| } |
| qobject_decref(rsp); |
| } |
| } |
| |
| /* handle requests/control events coming in over the channel */ |
| static void process_event(JSONMessageParser *parser, QList *tokens) |
| { |
| GAState *s = container_of(parser, GAState, parser); |
| QObject *obj; |
| QDict *qdict; |
| Error *err = NULL; |
| int ret; |
| |
| g_assert(s && parser); |
| |
| g_debug("process_event: called"); |
| obj = json_parser_parse_err(tokens, NULL, &err); |
| if (err || !obj || qobject_type(obj) != QTYPE_QDICT) { |
| qobject_decref(obj); |
| qdict = qdict_new(); |
| if (!err) { |
| g_warning("failed to parse event: unknown error"); |
| error_setg(&err, QERR_JSON_PARSING); |
| } else { |
| g_warning("failed to parse event: %s", error_get_pretty(err)); |
| } |
| qdict_put_obj(qdict, "error", qmp_build_error_object(err)); |
| error_free(err); |
| } else { |
| qdict = qobject_to_qdict(obj); |
| } |
| |
| g_assert(qdict); |
| |
| /* handle host->guest commands */ |
| if (qdict_haskey(qdict, "execute")) { |
| process_command(s, qdict); |
| } else { |
| if (!qdict_haskey(qdict, "error")) { |
| QDECREF(qdict); |
| qdict = qdict_new(); |
| g_warning("unrecognized payload format"); |
| error_setg(&err, QERR_UNSUPPORTED); |
| qdict_put_obj(qdict, "error", qmp_build_error_object(err)); |
| error_free(err); |
| } |
| ret = send_response(s, QOBJECT(qdict)); |
| if (ret < 0) { |
| g_warning("error sending error response: %s", strerror(-ret)); |
| } |
| } |
| |
| QDECREF(qdict); |
| } |
| |
| /* false return signals GAChannel to close the current client connection */ |
| static gboolean channel_event_cb(GIOCondition condition, gpointer data) |
| { |
| GAState *s = data; |
| gchar buf[QGA_READ_COUNT_DEFAULT+1]; |
| gsize count; |
| GError *err = NULL; |
| GIOStatus status = ga_channel_read(s->channel, buf, QGA_READ_COUNT_DEFAULT, &count); |
| if (err != NULL) { |
| g_warning("error reading channel: %s", err->message); |
| g_error_free(err); |
| return false; |
| } |
| switch (status) { |
| case G_IO_STATUS_ERROR: |
| g_warning("error reading channel"); |
| return false; |
| case G_IO_STATUS_NORMAL: |
| buf[count] = 0; |
| g_debug("read data, count: %d, data: %s", (int)count, buf); |
| json_message_parser_feed(&s->parser, (char *)buf, (int)count); |
| break; |
| case G_IO_STATUS_EOF: |
| g_debug("received EOF"); |
| if (!s->virtio) { |
| return false; |
| } |
| /* fall through */ |
| case G_IO_STATUS_AGAIN: |
| /* virtio causes us to spin here when no process is attached to |
| * host-side chardev. sleep a bit to mitigate this |
| */ |
| if (s->virtio) { |
| usleep(100*1000); |
| } |
| return true; |
| default: |
| g_warning("unknown channel read status, closing"); |
| return false; |
| } |
| return true; |
| } |
| |
| static gboolean channel_init(GAState *s, const gchar *method, const gchar *path) |
| { |
| GAChannelMethod channel_method; |
| |
| if (method == NULL) { |
| method = "virtio-serial"; |
| } |
| |
| if (path == NULL) { |
| if (strcmp(method, "virtio-serial") == 0 ) { |
| /* try the default path for the virtio-serial port */ |
| path = QGA_VIRTIO_PATH_DEFAULT; |
| } else if (strcmp(method, "isa-serial") == 0){ |
| /* try the default path for the serial port - COM1 */ |
| path = QGA_SERIAL_PATH_DEFAULT; |
| } else { |
| g_critical("must specify a path for this channel"); |
| return false; |
| } |
| } |
| |
| if (strcmp(method, "virtio-serial") == 0) { |
| s->virtio = true; /* virtio requires special handling in some cases */ |
| channel_method = GA_CHANNEL_VIRTIO_SERIAL; |
| } else if (strcmp(method, "isa-serial") == 0) { |
| channel_method = GA_CHANNEL_ISA_SERIAL; |
| } else if (strcmp(method, "unix-listen") == 0) { |
| channel_method = GA_CHANNEL_UNIX_LISTEN; |
| } else { |
| g_critical("unsupported channel method/type: %s", method); |
| return false; |
| } |
| |
| s->channel = ga_channel_new(channel_method, path, channel_event_cb, s); |
| if (!s->channel) { |
| g_critical("failed to create guest agent channel"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| #ifdef _WIN32 |
| DWORD WINAPI service_ctrl_handler(DWORD ctrl, DWORD type, LPVOID data, |
| LPVOID ctx) |
| { |
| DWORD ret = NO_ERROR; |
| GAService *service = &ga_state->service; |
| |
| switch (ctrl) |
| { |
| case SERVICE_CONTROL_STOP: |
| case SERVICE_CONTROL_SHUTDOWN: |
| quit_handler(SIGTERM); |
| service->status.dwCurrentState = SERVICE_STOP_PENDING; |
| SetServiceStatus(service->status_handle, &service->status); |
| break; |
| |
| default: |
| ret = ERROR_CALL_NOT_IMPLEMENTED; |
| } |
| return ret; |
| } |
| |
| VOID WINAPI service_main(DWORD argc, TCHAR *argv[]) |
| { |
| GAService *service = &ga_state->service; |
| |
| service->status_handle = RegisterServiceCtrlHandlerEx(QGA_SERVICE_NAME, |
| service_ctrl_handler, NULL); |
| |
| if (service->status_handle == 0) { |
| g_critical("Failed to register extended requests function!\n"); |
| return; |
| } |
| |
| service->status.dwServiceType = SERVICE_WIN32; |
| service->status.dwCurrentState = SERVICE_RUNNING; |
| service->status.dwControlsAccepted = SERVICE_ACCEPT_STOP | SERVICE_ACCEPT_SHUTDOWN; |
| service->status.dwWin32ExitCode = NO_ERROR; |
| service->status.dwServiceSpecificExitCode = NO_ERROR; |
| service->status.dwCheckPoint = 0; |
| service->status.dwWaitHint = 0; |
| SetServiceStatus(service->status_handle, &service->status); |
| |
| g_main_loop_run(ga_state->main_loop); |
| |
| service->status.dwCurrentState = SERVICE_STOPPED; |
| SetServiceStatus(service->status_handle, &service->status); |
| } |
| #endif |
| |
| static void set_persistent_state_defaults(GAPersistentState *pstate) |
| { |
| g_assert(pstate); |
| pstate->fd_counter = QGA_PSTATE_DEFAULT_FD_COUNTER; |
| } |
| |
| static void persistent_state_from_keyfile(GAPersistentState *pstate, |
| GKeyFile *keyfile) |
| { |
| g_assert(pstate); |
| g_assert(keyfile); |
| /* if any fields are missing, either because the file was tampered with |
| * by agents of chaos, or because the field wasn't present at the time the |
| * file was created, the best we can ever do is start over with the default |
| * values. so load them now, and ignore any errors in accessing key-value |
| * pairs |
| */ |
| set_persistent_state_defaults(pstate); |
| |
| if (g_key_file_has_key(keyfile, "global", "fd_counter", NULL)) { |
| pstate->fd_counter = |
| g_key_file_get_integer(keyfile, "global", "fd_counter", NULL); |
| } |
| } |
| |
| static void persistent_state_to_keyfile(const GAPersistentState *pstate, |
| GKeyFile *keyfile) |
| { |
| g_assert(pstate); |
| g_assert(keyfile); |
| |
| g_key_file_set_integer(keyfile, "global", "fd_counter", pstate->fd_counter); |
| } |
| |
| static gboolean write_persistent_state(const GAPersistentState *pstate, |
| const gchar *path) |
| { |
| GKeyFile *keyfile = g_key_file_new(); |
| GError *gerr = NULL; |
| gboolean ret = true; |
| gchar *data = NULL; |
| gsize data_len; |
| |
| g_assert(pstate); |
| |
| persistent_state_to_keyfile(pstate, keyfile); |
| data = g_key_file_to_data(keyfile, &data_len, &gerr); |
| if (gerr) { |
| g_critical("failed to convert persistent state to string: %s", |
| gerr->message); |
| ret = false; |
| goto out; |
| } |
| |
| g_file_set_contents(path, data, data_len, &gerr); |
| if (gerr) { |
| g_critical("failed to write persistent state to %s: %s", |
| path, gerr->message); |
| ret = false; |
| goto out; |
| } |
| |
| out: |
| if (gerr) { |
| g_error_free(gerr); |
| } |
| if (keyfile) { |
| g_key_file_free(keyfile); |
| } |
| g_free(data); |
| return ret; |
| } |
| |
| static gboolean read_persistent_state(GAPersistentState *pstate, |
| const gchar *path, gboolean frozen) |
| { |
| GKeyFile *keyfile = NULL; |
| GError *gerr = NULL; |
| struct stat st; |
| gboolean ret = true; |
| |
| g_assert(pstate); |
| |
| if (stat(path, &st) == -1) { |
| /* it's okay if state file doesn't exist, but any other error |
| * indicates a permissions issue or some other misconfiguration |
| * that we likely won't be able to recover from. |
| */ |
| if (errno != ENOENT) { |
| g_critical("unable to access state file at path %s: %s", |
| path, strerror(errno)); |
| ret = false; |
| goto out; |
| } |
| |
| /* file doesn't exist. initialize state to default values and |
| * attempt to save now. (we could wait till later when we have |
| * modified state we need to commit, but if there's a problem, |
| * such as a missing parent directory, we want to catch it now) |
| * |
| * there is a potential scenario where someone either managed to |
| * update the agent from a version that didn't use a key store |
| * while qemu-ga thought the filesystem was frozen, or |
| * deleted the key store prior to issuing a fsfreeze, prior |
| * to restarting the agent. in this case we go ahead and defer |
| * initial creation till we actually have modified state to |
| * write, otherwise fail to recover from freeze. |
| */ |
| set_persistent_state_defaults(pstate); |
| if (!frozen) { |
| ret = write_persistent_state(pstate, path); |
| if (!ret) { |
| g_critical("unable to create state file at path %s", path); |
| ret = false; |
| goto out; |
| } |
| } |
| ret = true; |
| goto out; |
| } |
| |
| keyfile = g_key_file_new(); |
| g_key_file_load_from_file(keyfile, path, 0, &gerr); |
| if (gerr) { |
| g_critical("error loading persistent state from path: %s, %s", |
| path, gerr->message); |
| ret = false; |
| goto out; |
| } |
| |
| persistent_state_from_keyfile(pstate, keyfile); |
| |
| out: |
| if (keyfile) { |
| g_key_file_free(keyfile); |
| } |
| if (gerr) { |
| g_error_free(gerr); |
| } |
| |
| return ret; |
| } |
| |
| int64_t ga_get_fd_handle(GAState *s, Error **errp) |
| { |
| int64_t handle; |
| |
| g_assert(s->pstate_filepath); |
| /* we blacklist commands and avoid operations that potentially require |
| * writing to disk when we're in a frozen state. this includes opening |
| * new files, so we should never get here in that situation |
| */ |
| g_assert(!ga_is_frozen(s)); |
| |
| handle = s->pstate.fd_counter++; |
| |
| /* This should never happen on a reasonable timeframe, as guest-file-open |
| * would have to be issued 2^63 times */ |
| if (s->pstate.fd_counter == INT64_MAX) { |
| abort(); |
| } |
| |
| if (!write_persistent_state(&s->pstate, s->pstate_filepath)) { |
| error_setg(errp, "failed to commit persistent state to disk"); |
| return -1; |
| } |
| |
| return handle; |
| } |
| |
| static void ga_print_cmd(QmpCommand *cmd, void *opaque) |
| { |
| printf("%s\n", qmp_command_name(cmd)); |
| } |
| |
| int main(int argc, char **argv) |
| { |
| const char *sopt = "hVvdm:p:l:f:F::b:s:t:"; |
| const char *method = NULL, *path = NULL; |
| const char *log_filepath = NULL; |
| const char *pid_filepath; |
| #ifdef CONFIG_FSFREEZE |
| const char *fsfreeze_hook = NULL; |
| #endif |
| const char *state_dir; |
| #ifdef _WIN32 |
| const char *service = NULL; |
| #endif |
| const struct option lopt[] = { |
| { "help", 0, NULL, 'h' }, |
| { "version", 0, NULL, 'V' }, |
| { "logfile", 1, NULL, 'l' }, |
| { "pidfile", 1, NULL, 'f' }, |
| #ifdef CONFIG_FSFREEZE |
| { "fsfreeze-hook", 2, NULL, 'F' }, |
| #endif |
| { "verbose", 0, NULL, 'v' }, |
| { "method", 1, NULL, 'm' }, |
| { "path", 1, NULL, 'p' }, |
| { "daemonize", 0, NULL, 'd' }, |
| { "blacklist", 1, NULL, 'b' }, |
| #ifdef _WIN32 |
| { "service", 1, NULL, 's' }, |
| #endif |
| { "statedir", 1, NULL, 't' }, |
| { NULL, 0, NULL, 0 } |
| }; |
| int opt_ind = 0, ch, daemonize = 0, i, j, len; |
| GLogLevelFlags log_level = G_LOG_LEVEL_ERROR | G_LOG_LEVEL_CRITICAL; |
| GList *blacklist = NULL; |
| GAState *s; |
| |
| module_call_init(MODULE_INIT_QAPI); |
| |
| init_dfl_pathnames(); |
| pid_filepath = dfl_pathnames.pidfile; |
| state_dir = dfl_pathnames.state_dir; |
| |
| while ((ch = getopt_long(argc, argv, sopt, lopt, &opt_ind)) != -1) { |
| switch (ch) { |
| case 'm': |
| method = optarg; |
| break; |
| case 'p': |
| path = optarg; |
| break; |
| case 'l': |
| log_filepath = optarg; |
| break; |
| case 'f': |
| pid_filepath = optarg; |
| break; |
| #ifdef CONFIG_FSFREEZE |
| case 'F': |
| fsfreeze_hook = optarg ? optarg : QGA_FSFREEZE_HOOK_DEFAULT; |
| break; |
| #endif |
| case 't': |
| state_dir = optarg; |
| break; |
| case 'v': |
| /* enable all log levels */ |
| log_level = G_LOG_LEVEL_MASK; |
| break; |
| case 'V': |
| printf("QEMU Guest Agent %s\n", QEMU_VERSION); |
| return 0; |
| case 'd': |
| daemonize = 1; |
| break; |
| case 'b': { |
| if (is_help_option(optarg)) { |
| qmp_for_each_command(ga_print_cmd, NULL); |
| return 0; |
| } |
| for (j = 0, i = 0, len = strlen(optarg); i < len; i++) { |
| if (optarg[i] == ',') { |
| optarg[i] = 0; |
| blacklist = g_list_append(blacklist, &optarg[j]); |
| j = i + 1; |
| } |
| } |
| if (j < i) { |
| blacklist = g_list_append(blacklist, &optarg[j]); |
| } |
| break; |
| } |
| #ifdef _WIN32 |
| case 's': |
| service = optarg; |
| if (strcmp(service, "install") == 0) { |
| const char *fixed_state_dir; |
| |
| /* If the user passed the "-t" option, we save that state dir |
| * in the service. Otherwise we let the service fetch the state |
| * dir from the environment when it starts. |
| */ |
| fixed_state_dir = (state_dir == dfl_pathnames.state_dir) ? |
| NULL : |
| state_dir; |
| if (ga_install_vss_provider()) { |
| return EXIT_FAILURE; |
| } |
| if (ga_install_service(path, log_filepath, fixed_state_dir)) { |
| return EXIT_FAILURE; |
| } |
| return 0; |
| } else if (strcmp(service, "uninstall") == 0) { |
| ga_uninstall_vss_provider(); |
| return ga_uninstall_service(); |
| } else if (strcmp(service, "vss-install") == 0) { |
| if (ga_install_vss_provider()) { |
| return EXIT_FAILURE; |
| } |
| return EXIT_SUCCESS; |
| } else if (strcmp(service, "vss-uninstall") == 0) { |
| ga_uninstall_vss_provider(); |
| return EXIT_SUCCESS; |
| } else { |
| printf("Unknown service command.\n"); |
| return EXIT_FAILURE; |
| } |
| break; |
| #endif |
| case 'h': |
| usage(argv[0]); |
| return 0; |
| case '?': |
| g_print("Unknown option, try '%s --help' for more information.\n", |
| argv[0]); |
| return EXIT_FAILURE; |
| } |
| } |
| |
| #ifdef _WIN32 |
| /* On win32 the state directory is application specific (be it the default |
| * or a user override). We got past the command line parsing; let's create |
| * the directory (with any intermediate directories). If we run into an |
| * error later on, we won't try to clean up the directory, it is considered |
| * persistent. |
| */ |
| if (g_mkdir_with_parents(state_dir, S_IRWXU) == -1) { |
| g_critical("unable to create (an ancestor of) the state directory" |
| " '%s': %s", state_dir, strerror(errno)); |
| return EXIT_FAILURE; |
| } |
| #endif |
| |
| s = g_malloc0(sizeof(GAState)); |
| s->log_level = log_level; |
| s->log_file = stderr; |
| #ifdef CONFIG_FSFREEZE |
| s->fsfreeze_hook = fsfreeze_hook; |
| #endif |
| g_log_set_default_handler(ga_log, s); |
| g_log_set_fatal_mask(NULL, G_LOG_LEVEL_ERROR); |
| ga_enable_logging(s); |
| s->state_filepath_isfrozen = g_strdup_printf("%s/qga.state.isfrozen", |
| state_dir); |
| s->pstate_filepath = g_strdup_printf("%s/qga.state", state_dir); |
| s->frozen = false; |
| |
| #ifndef _WIN32 |
| /* check if a previous instance of qemu-ga exited with filesystems' state |
| * marked as frozen. this could be a stale value (a non-qemu-ga process |
| * or reboot may have since unfrozen them), but better to require an |
| * uneeded unfreeze than to risk hanging on start-up |
| */ |
| struct stat st; |
| if (stat(s->state_filepath_isfrozen, &st) == -1) { |
| /* it's okay if the file doesn't exist, but if we can't access for |
| * some other reason, such as permissions, there's a configuration |
| * that needs to be addressed. so just bail now before we get into |
| * more trouble later |
| */ |
| if (errno != ENOENT) { |
| g_critical("unable to access state file at path %s: %s", |
| s->state_filepath_isfrozen, strerror(errno)); |
| return EXIT_FAILURE; |
| } |
| } else { |
| g_warning("previous instance appears to have exited with frozen" |
| " filesystems. deferring logging/pidfile creation and" |
| " disabling non-fsfreeze-safe commands until" |
| " guest-fsfreeze-thaw is issued, or filesystems are" |
| " manually unfrozen and the file %s is removed", |
| s->state_filepath_isfrozen); |
| s->frozen = true; |
| } |
| #endif |
| |
| if (ga_is_frozen(s)) { |
| if (daemonize) { |
| /* delay opening/locking of pidfile till filesystems are unfrozen */ |
| s->deferred_options.pid_filepath = pid_filepath; |
| become_daemon(NULL); |
| } |
| if (log_filepath) { |
| /* delay opening the log file till filesystems are unfrozen */ |
| s->deferred_options.log_filepath = log_filepath; |
| } |
| ga_disable_logging(s); |
| qmp_for_each_command(ga_disable_non_whitelisted, NULL); |
| } else { |
| if (daemonize) { |
| become_daemon(pid_filepath); |
| } |
| if (log_filepath) { |
| FILE *log_file = ga_open_logfile(log_filepath); |
| if (!log_file) { |
| g_critical("unable to open specified log file: %s", |
| strerror(errno)); |
| goto out_bad; |
| } |
| s->log_file = log_file; |
| } |
| } |
| |
| /* load persistent state from disk */ |
| if (!read_persistent_state(&s->pstate, |
| s->pstate_filepath, |
| ga_is_frozen(s))) { |
| g_critical("failed to load persistent state"); |
| goto out_bad; |
| } |
| |
| blacklist = ga_command_blacklist_init(blacklist); |
| if (blacklist) { |
| s->blacklist = blacklist; |
| do { |
| g_debug("disabling command: %s", (char *)blacklist->data); |
| qmp_disable_command(blacklist->data); |
| blacklist = g_list_next(blacklist); |
| } while (blacklist); |
| } |
| s->command_state = ga_command_state_new(); |
| ga_command_state_init(s, s->command_state); |
| ga_command_state_init_all(s->command_state); |
| json_message_parser_init(&s->parser, process_event); |
| ga_state = s; |
| #ifndef _WIN32 |
| if (!register_signal_handlers()) { |
| g_critical("failed to register signal handlers"); |
| goto out_bad; |
| } |
| #endif |
| |
| s->main_loop = g_main_loop_new(NULL, false); |
| if (!channel_init(ga_state, method, path)) { |
| g_critical("failed to initialize guest agent channel"); |
| goto out_bad; |
| } |
| #ifndef _WIN32 |
| g_main_loop_run(ga_state->main_loop); |
| #else |
| if (daemonize) { |
| SERVICE_TABLE_ENTRY service_table[] = { |
| { (char *)QGA_SERVICE_NAME, service_main }, { NULL, NULL } }; |
| StartServiceCtrlDispatcher(service_table); |
| } else { |
| g_main_loop_run(ga_state->main_loop); |
| } |
| #endif |
| |
| ga_command_state_cleanup_all(ga_state->command_state); |
| ga_channel_free(ga_state->channel); |
| |
| if (daemonize) { |
| unlink(pid_filepath); |
| } |
| return 0; |
| |
| out_bad: |
| if (daemonize) { |
| unlink(pid_filepath); |
| } |
| return EXIT_FAILURE; |
| } |