| /* |
| * ARM CMSDK APB dual-timer emulation |
| * |
| * Copyright (c) 2018 Linaro Limited |
| * Written by Peter Maydell |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 or |
| * (at your option) any later version. |
| */ |
| |
| /* |
| * This is a model of the "APB dual-input timer" which is part of the Cortex-M |
| * System Design Kit (CMSDK) and documented in the Cortex-M System |
| * Design Kit Technical Reference Manual (ARM DDI0479C): |
| * https://developer.arm.com/products/system-design/system-design-kits/cortex-m-system-design-kit |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/log.h" |
| #include "trace.h" |
| #include "qapi/error.h" |
| #include "qemu/module.h" |
| #include "hw/sysbus.h" |
| #include "hw/irq.h" |
| #include "hw/qdev-properties.h" |
| #include "hw/registerfields.h" |
| #include "hw/qdev-clock.h" |
| #include "hw/timer/cmsdk-apb-dualtimer.h" |
| #include "migration/vmstate.h" |
| |
| REG32(TIMER1LOAD, 0x0) |
| REG32(TIMER1VALUE, 0x4) |
| REG32(TIMER1CONTROL, 0x8) |
| FIELD(CONTROL, ONESHOT, 0, 1) |
| FIELD(CONTROL, SIZE, 1, 1) |
| FIELD(CONTROL, PRESCALE, 2, 2) |
| FIELD(CONTROL, INTEN, 5, 1) |
| FIELD(CONTROL, MODE, 6, 1) |
| FIELD(CONTROL, ENABLE, 7, 1) |
| #define R_CONTROL_VALID_MASK (R_CONTROL_ONESHOT_MASK | R_CONTROL_SIZE_MASK | \ |
| R_CONTROL_PRESCALE_MASK | R_CONTROL_INTEN_MASK | \ |
| R_CONTROL_MODE_MASK | R_CONTROL_ENABLE_MASK) |
| REG32(TIMER1INTCLR, 0xc) |
| REG32(TIMER1RIS, 0x10) |
| REG32(TIMER1MIS, 0x14) |
| REG32(TIMER1BGLOAD, 0x18) |
| REG32(TIMER2LOAD, 0x20) |
| REG32(TIMER2VALUE, 0x24) |
| REG32(TIMER2CONTROL, 0x28) |
| REG32(TIMER2INTCLR, 0x2c) |
| REG32(TIMER2RIS, 0x30) |
| REG32(TIMER2MIS, 0x34) |
| REG32(TIMER2BGLOAD, 0x38) |
| REG32(TIMERITCR, 0xf00) |
| FIELD(TIMERITCR, ENABLE, 0, 1) |
| #define R_TIMERITCR_VALID_MASK R_TIMERITCR_ENABLE_MASK |
| REG32(TIMERITOP, 0xf04) |
| FIELD(TIMERITOP, TIMINT1, 0, 1) |
| FIELD(TIMERITOP, TIMINT2, 1, 1) |
| #define R_TIMERITOP_VALID_MASK (R_TIMERITOP_TIMINT1_MASK | \ |
| R_TIMERITOP_TIMINT2_MASK) |
| REG32(PID4, 0xfd0) |
| REG32(PID5, 0xfd4) |
| REG32(PID6, 0xfd8) |
| REG32(PID7, 0xfdc) |
| REG32(PID0, 0xfe0) |
| REG32(PID1, 0xfe4) |
| REG32(PID2, 0xfe8) |
| REG32(PID3, 0xfec) |
| REG32(CID0, 0xff0) |
| REG32(CID1, 0xff4) |
| REG32(CID2, 0xff8) |
| REG32(CID3, 0xffc) |
| |
| /* PID/CID values */ |
| static const int timer_id[] = { |
| 0x04, 0x00, 0x00, 0x00, /* PID4..PID7 */ |
| 0x23, 0xb8, 0x1b, 0x00, /* PID0..PID3 */ |
| 0x0d, 0xf0, 0x05, 0xb1, /* CID0..CID3 */ |
| }; |
| |
| static bool cmsdk_dualtimermod_intstatus(CMSDKAPBDualTimerModule *m) |
| { |
| /* Return masked interrupt status for the timer module */ |
| return m->intstatus && (m->control & R_CONTROL_INTEN_MASK); |
| } |
| |
| static void cmsdk_apb_dualtimer_update(CMSDKAPBDualTimer *s) |
| { |
| bool timint1, timint2, timintc; |
| |
| if (s->timeritcr) { |
| /* Integration test mode: outputs driven directly from TIMERITOP bits */ |
| timint1 = s->timeritop & R_TIMERITOP_TIMINT1_MASK; |
| timint2 = s->timeritop & R_TIMERITOP_TIMINT2_MASK; |
| } else { |
| timint1 = cmsdk_dualtimermod_intstatus(&s->timermod[0]); |
| timint2 = cmsdk_dualtimermod_intstatus(&s->timermod[1]); |
| } |
| |
| timintc = timint1 || timint2; |
| |
| qemu_set_irq(s->timermod[0].timerint, timint1); |
| qemu_set_irq(s->timermod[1].timerint, timint2); |
| qemu_set_irq(s->timerintc, timintc); |
| } |
| |
| static int cmsdk_dualtimermod_divisor(CMSDKAPBDualTimerModule *m) |
| { |
| /* Return the divisor set by the current CONTROL.PRESCALE value */ |
| switch (FIELD_EX32(m->control, CONTROL, PRESCALE)) { |
| case 0: |
| return 1; |
| case 1: |
| return 16; |
| case 2: |
| case 3: /* UNDEFINED, we treat like 2 (and complained when it was set) */ |
| return 256; |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| static void cmsdk_dualtimermod_write_control(CMSDKAPBDualTimerModule *m, |
| uint32_t newctrl) |
| { |
| /* Handle a write to the CONTROL register */ |
| uint32_t changed; |
| |
| ptimer_transaction_begin(m->timer); |
| |
| newctrl &= R_CONTROL_VALID_MASK; |
| |
| changed = m->control ^ newctrl; |
| |
| if (changed & ~newctrl & R_CONTROL_ENABLE_MASK) { |
| /* ENABLE cleared, stop timer before any further changes */ |
| ptimer_stop(m->timer); |
| } |
| |
| if (changed & R_CONTROL_PRESCALE_MASK) { |
| int divisor; |
| |
| switch (FIELD_EX32(newctrl, CONTROL, PRESCALE)) { |
| case 0: |
| divisor = 1; |
| break; |
| case 1: |
| divisor = 16; |
| break; |
| case 2: |
| divisor = 256; |
| break; |
| case 3: |
| /* UNDEFINED; complain, and arbitrarily treat like 2 */ |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "CMSDK APB dual-timer: CONTROL.PRESCALE==0b11" |
| " is undefined behaviour\n"); |
| divisor = 256; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| ptimer_set_period_from_clock(m->timer, m->parent->timclk, divisor); |
| } |
| |
| if (changed & R_CONTROL_MODE_MASK) { |
| uint32_t load; |
| if (newctrl & R_CONTROL_MODE_MASK) { |
| /* Periodic: the limit is the LOAD register value */ |
| load = m->load; |
| } else { |
| /* Free-running: counter wraps around */ |
| load = ptimer_get_limit(m->timer); |
| if (!(m->control & R_CONTROL_SIZE_MASK)) { |
| load = deposit32(m->load, 0, 16, load); |
| } |
| m->load = load; |
| load = 0xffffffff; |
| } |
| if (!(m->control & R_CONTROL_SIZE_MASK)) { |
| load &= 0xffff; |
| } |
| ptimer_set_limit(m->timer, load, 0); |
| } |
| |
| if (changed & R_CONTROL_SIZE_MASK) { |
| /* Timer switched between 16 and 32 bit count */ |
| uint32_t value, load; |
| |
| value = ptimer_get_count(m->timer); |
| load = ptimer_get_limit(m->timer); |
| if (newctrl & R_CONTROL_SIZE_MASK) { |
| /* 16 -> 32, top half of VALUE is in struct field */ |
| value = deposit32(m->value, 0, 16, value); |
| } else { |
| /* 32 -> 16: save top half to struct field and truncate */ |
| m->value = value; |
| value &= 0xffff; |
| } |
| |
| if (newctrl & R_CONTROL_MODE_MASK) { |
| /* Periodic, timer limit has LOAD value */ |
| if (newctrl & R_CONTROL_SIZE_MASK) { |
| load = deposit32(m->load, 0, 16, load); |
| } else { |
| m->load = load; |
| load &= 0xffff; |
| } |
| } else { |
| /* Free-running, timer limit is set to give wraparound */ |
| if (newctrl & R_CONTROL_SIZE_MASK) { |
| load = 0xffffffff; |
| } else { |
| load = 0xffff; |
| } |
| } |
| ptimer_set_count(m->timer, value); |
| ptimer_set_limit(m->timer, load, 0); |
| } |
| |
| if (newctrl & R_CONTROL_ENABLE_MASK) { |
| /* |
| * ENABLE is set; start the timer after all other changes. |
| * We start it even if the ENABLE bit didn't actually change, |
| * in case the timer was an expired one-shot timer that has |
| * now been changed into a free-running or periodic timer. |
| */ |
| ptimer_run(m->timer, !!(newctrl & R_CONTROL_ONESHOT_MASK)); |
| } |
| |
| m->control = newctrl; |
| |
| ptimer_transaction_commit(m->timer); |
| } |
| |
| static uint64_t cmsdk_apb_dualtimer_read(void *opaque, hwaddr offset, |
| unsigned size) |
| { |
| CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(opaque); |
| uint64_t r; |
| |
| if (offset >= A_TIMERITCR) { |
| switch (offset) { |
| case A_TIMERITCR: |
| r = s->timeritcr; |
| break; |
| case A_PID4 ... A_CID3: |
| r = timer_id[(offset - A_PID4) / 4]; |
| break; |
| default: |
| bad_offset: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "CMSDK APB dual-timer read: bad offset %x\n", |
| (int) offset); |
| r = 0; |
| break; |
| } |
| } else { |
| int timer = offset >> 5; |
| CMSDKAPBDualTimerModule *m; |
| |
| if (timer >= ARRAY_SIZE(s->timermod)) { |
| goto bad_offset; |
| } |
| |
| m = &s->timermod[timer]; |
| |
| switch (offset & 0x1F) { |
| case A_TIMER1LOAD: |
| case A_TIMER1BGLOAD: |
| if (m->control & R_CONTROL_MODE_MASK) { |
| /* |
| * Periodic: the ptimer limit is the LOAD register value, (or |
| * just the low 16 bits of it if the timer is in 16-bit mode) |
| */ |
| r = ptimer_get_limit(m->timer); |
| if (!(m->control & R_CONTROL_SIZE_MASK)) { |
| r = deposit32(m->load, 0, 16, r); |
| } |
| } else { |
| /* Free-running: LOAD register value is just in m->load */ |
| r = m->load; |
| } |
| break; |
| case A_TIMER1VALUE: |
| r = ptimer_get_count(m->timer); |
| if (!(m->control & R_CONTROL_SIZE_MASK)) { |
| r = deposit32(m->value, 0, 16, r); |
| } |
| break; |
| case A_TIMER1CONTROL: |
| r = m->control; |
| break; |
| case A_TIMER1RIS: |
| r = m->intstatus; |
| break; |
| case A_TIMER1MIS: |
| r = cmsdk_dualtimermod_intstatus(m); |
| break; |
| default: |
| goto bad_offset; |
| } |
| } |
| |
| trace_cmsdk_apb_dualtimer_read(offset, r, size); |
| return r; |
| } |
| |
| static void cmsdk_apb_dualtimer_write(void *opaque, hwaddr offset, |
| uint64_t value, unsigned size) |
| { |
| CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(opaque); |
| |
| trace_cmsdk_apb_dualtimer_write(offset, value, size); |
| |
| if (offset >= A_TIMERITCR) { |
| switch (offset) { |
| case A_TIMERITCR: |
| s->timeritcr = value & R_TIMERITCR_VALID_MASK; |
| cmsdk_apb_dualtimer_update(s); |
| break; |
| case A_TIMERITOP: |
| s->timeritop = value & R_TIMERITOP_VALID_MASK; |
| cmsdk_apb_dualtimer_update(s); |
| break; |
| default: |
| bad_offset: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "CMSDK APB dual-timer write: bad offset %x\n", |
| (int) offset); |
| break; |
| } |
| } else { |
| int timer = offset >> 5; |
| CMSDKAPBDualTimerModule *m; |
| |
| if (timer >= ARRAY_SIZE(s->timermod)) { |
| goto bad_offset; |
| } |
| |
| m = &s->timermod[timer]; |
| |
| switch (offset & 0x1F) { |
| case A_TIMER1LOAD: |
| /* Set the limit, and immediately reload the count from it */ |
| m->load = value; |
| m->value = value; |
| if (!(m->control & R_CONTROL_SIZE_MASK)) { |
| value &= 0xffff; |
| } |
| ptimer_transaction_begin(m->timer); |
| if (!(m->control & R_CONTROL_MODE_MASK)) { |
| /* |
| * In free-running mode this won't set the limit but will |
| * still change the current count value. |
| */ |
| ptimer_set_count(m->timer, value); |
| } else { |
| if (!value) { |
| ptimer_stop(m->timer); |
| } |
| ptimer_set_limit(m->timer, value, 1); |
| if (value && (m->control & R_CONTROL_ENABLE_MASK)) { |
| /* Force possibly-expired oneshot timer to restart */ |
| ptimer_run(m->timer, 1); |
| } |
| } |
| ptimer_transaction_commit(m->timer); |
| break; |
| case A_TIMER1BGLOAD: |
| /* Set the limit, but not the current count */ |
| m->load = value; |
| if (!(m->control & R_CONTROL_MODE_MASK)) { |
| /* In free-running mode there is no limit */ |
| break; |
| } |
| if (!(m->control & R_CONTROL_SIZE_MASK)) { |
| value &= 0xffff; |
| } |
| ptimer_transaction_begin(m->timer); |
| ptimer_set_limit(m->timer, value, 0); |
| ptimer_transaction_commit(m->timer); |
| break; |
| case A_TIMER1CONTROL: |
| cmsdk_dualtimermod_write_control(m, value); |
| cmsdk_apb_dualtimer_update(s); |
| break; |
| case A_TIMER1INTCLR: |
| m->intstatus = 0; |
| cmsdk_apb_dualtimer_update(s); |
| break; |
| default: |
| goto bad_offset; |
| } |
| } |
| } |
| |
| static const MemoryRegionOps cmsdk_apb_dualtimer_ops = { |
| .read = cmsdk_apb_dualtimer_read, |
| .write = cmsdk_apb_dualtimer_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| /* byte/halfword accesses are just zero-padded on reads and writes */ |
| .impl.min_access_size = 4, |
| .impl.max_access_size = 4, |
| .valid.min_access_size = 1, |
| .valid.max_access_size = 4, |
| }; |
| |
| static void cmsdk_dualtimermod_tick(void *opaque) |
| { |
| CMSDKAPBDualTimerModule *m = opaque; |
| |
| m->intstatus = 1; |
| cmsdk_apb_dualtimer_update(m->parent); |
| } |
| |
| static void cmsdk_dualtimermod_reset(CMSDKAPBDualTimerModule *m) |
| { |
| m->control = R_CONTROL_INTEN_MASK; |
| m->intstatus = 0; |
| m->load = 0; |
| m->value = 0xffffffff; |
| ptimer_transaction_begin(m->timer); |
| ptimer_stop(m->timer); |
| /* |
| * We start in free-running mode, with VALUE at 0xffffffff, and |
| * in 16-bit counter mode. This means that the ptimer count and |
| * limit must both be set to 0xffff, so we wrap at 16 bits. |
| */ |
| ptimer_set_limit(m->timer, 0xffff, 1); |
| ptimer_set_period_from_clock(m->timer, m->parent->timclk, |
| cmsdk_dualtimermod_divisor(m)); |
| ptimer_transaction_commit(m->timer); |
| } |
| |
| static void cmsdk_apb_dualtimer_reset(DeviceState *dev) |
| { |
| CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(dev); |
| int i; |
| |
| trace_cmsdk_apb_dualtimer_reset(); |
| |
| for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { |
| cmsdk_dualtimermod_reset(&s->timermod[i]); |
| } |
| s->timeritcr = 0; |
| s->timeritop = 0; |
| } |
| |
| static void cmsdk_apb_dualtimer_clk_update(void *opaque, ClockEvent event) |
| { |
| CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(opaque); |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { |
| CMSDKAPBDualTimerModule *m = &s->timermod[i]; |
| ptimer_transaction_begin(m->timer); |
| ptimer_set_period_from_clock(m->timer, m->parent->timclk, |
| cmsdk_dualtimermod_divisor(m)); |
| ptimer_transaction_commit(m->timer); |
| } |
| } |
| |
| static void cmsdk_apb_dualtimer_init(Object *obj) |
| { |
| SysBusDevice *sbd = SYS_BUS_DEVICE(obj); |
| CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(obj); |
| int i; |
| |
| memory_region_init_io(&s->iomem, obj, &cmsdk_apb_dualtimer_ops, |
| s, "cmsdk-apb-dualtimer", 0x1000); |
| sysbus_init_mmio(sbd, &s->iomem); |
| sysbus_init_irq(sbd, &s->timerintc); |
| |
| for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { |
| sysbus_init_irq(sbd, &s->timermod[i].timerint); |
| } |
| s->timclk = qdev_init_clock_in(DEVICE(s), "TIMCLK", |
| cmsdk_apb_dualtimer_clk_update, s, |
| ClockUpdate); |
| } |
| |
| static void cmsdk_apb_dualtimer_realize(DeviceState *dev, Error **errp) |
| { |
| CMSDKAPBDualTimer *s = CMSDK_APB_DUALTIMER(dev); |
| int i; |
| |
| if (!clock_has_source(s->timclk)) { |
| error_setg(errp, "CMSDK APB dualtimer: TIMCLK clock must be connected"); |
| return; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(s->timermod); i++) { |
| CMSDKAPBDualTimerModule *m = &s->timermod[i]; |
| |
| m->parent = s; |
| m->timer = ptimer_init(cmsdk_dualtimermod_tick, m, |
| PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD | |
| PTIMER_POLICY_TRIGGER_ONLY_ON_DECREMENT | |
| PTIMER_POLICY_NO_IMMEDIATE_RELOAD | |
| PTIMER_POLICY_NO_COUNTER_ROUND_DOWN); |
| } |
| } |
| |
| static const VMStateDescription cmsdk_dualtimermod_vmstate = { |
| .name = "cmsdk-apb-dualtimer-module", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (const VMStateField[]) { |
| VMSTATE_PTIMER(timer, CMSDKAPBDualTimerModule), |
| VMSTATE_UINT32(load, CMSDKAPBDualTimerModule), |
| VMSTATE_UINT32(value, CMSDKAPBDualTimerModule), |
| VMSTATE_UINT32(control, CMSDKAPBDualTimerModule), |
| VMSTATE_UINT32(intstatus, CMSDKAPBDualTimerModule), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static const VMStateDescription cmsdk_apb_dualtimer_vmstate = { |
| .name = "cmsdk-apb-dualtimer", |
| .version_id = 2, |
| .minimum_version_id = 2, |
| .fields = (const VMStateField[]) { |
| VMSTATE_CLOCK(timclk, CMSDKAPBDualTimer), |
| VMSTATE_STRUCT_ARRAY(timermod, CMSDKAPBDualTimer, |
| CMSDK_APB_DUALTIMER_NUM_MODULES, |
| 1, cmsdk_dualtimermod_vmstate, |
| CMSDKAPBDualTimerModule), |
| VMSTATE_UINT32(timeritcr, CMSDKAPBDualTimer), |
| VMSTATE_UINT32(timeritop, CMSDKAPBDualTimer), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void cmsdk_apb_dualtimer_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = cmsdk_apb_dualtimer_realize; |
| dc->vmsd = &cmsdk_apb_dualtimer_vmstate; |
| device_class_set_legacy_reset(dc, cmsdk_apb_dualtimer_reset); |
| } |
| |
| static const TypeInfo cmsdk_apb_dualtimer_info = { |
| .name = TYPE_CMSDK_APB_DUALTIMER, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(CMSDKAPBDualTimer), |
| .instance_init = cmsdk_apb_dualtimer_init, |
| .class_init = cmsdk_apb_dualtimer_class_init, |
| }; |
| |
| static void cmsdk_apb_dualtimer_register_types(void) |
| { |
| type_register_static(&cmsdk_apb_dualtimer_info); |
| } |
| |
| type_init(cmsdk_apb_dualtimer_register_types); |