| /* |
| * QEMU ARM CPU |
| * |
| * Copyright (c) 2012 SUSE LINUX Products GmbH |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see |
| * <http://www.gnu.org/licenses/gpl-2.0.html> |
| */ |
| |
| #include "cpu.h" |
| #include "qemu-common.h" |
| #if !defined(CONFIG_USER_ONLY) |
| #include "hw/loader.h" |
| #endif |
| #include "sysemu.h" |
| |
| static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque) |
| { |
| /* Reset a single ARMCPRegInfo register */ |
| ARMCPRegInfo *ri = value; |
| ARMCPU *cpu = opaque; |
| |
| if (ri->type & ARM_CP_SPECIAL) { |
| return; |
| } |
| |
| if (ri->resetfn) { |
| ri->resetfn(&cpu->env, ri); |
| return; |
| } |
| |
| /* A zero offset is never possible as it would be regs[0] |
| * so we use it to indicate that reset is being handled elsewhere. |
| * This is basically only used for fields in non-core coprocessors |
| * (like the pxa2xx ones). |
| */ |
| if (!ri->fieldoffset) { |
| return; |
| } |
| |
| if (ri->type & ARM_CP_64BIT) { |
| CPREG_FIELD64(&cpu->env, ri) = ri->resetvalue; |
| } else { |
| CPREG_FIELD32(&cpu->env, ri) = ri->resetvalue; |
| } |
| } |
| |
| /* CPUClass::reset() */ |
| static void arm_cpu_reset(CPUState *s) |
| { |
| ARMCPU *cpu = ARM_CPU(s); |
| ARMCPUClass *acc = ARM_CPU_GET_CLASS(cpu); |
| CPUARMState *env = &cpu->env; |
| |
| if (qemu_loglevel_mask(CPU_LOG_RESET)) { |
| qemu_log("CPU Reset (CPU %d)\n", env->cpu_index); |
| log_cpu_state(env, 0); |
| } |
| |
| acc->parent_reset(s); |
| |
| memset(env, 0, offsetof(CPUARMState, breakpoints)); |
| g_hash_table_foreach(cpu->cp_regs, cp_reg_reset, cpu); |
| env->vfp.xregs[ARM_VFP_FPSID] = cpu->reset_fpsid; |
| env->vfp.xregs[ARM_VFP_MVFR0] = cpu->mvfr0; |
| env->vfp.xregs[ARM_VFP_MVFR1] = cpu->mvfr1; |
| |
| if (arm_feature(env, ARM_FEATURE_IWMMXT)) { |
| env->iwmmxt.cregs[ARM_IWMMXT_wCID] = 0x69051000 | 'Q'; |
| } |
| |
| #if defined(CONFIG_USER_ONLY) |
| env->uncached_cpsr = ARM_CPU_MODE_USR; |
| /* For user mode we must enable access to coprocessors */ |
| env->vfp.xregs[ARM_VFP_FPEXC] = 1 << 30; |
| if (arm_feature(env, ARM_FEATURE_IWMMXT)) { |
| env->cp15.c15_cpar = 3; |
| } else if (arm_feature(env, ARM_FEATURE_XSCALE)) { |
| env->cp15.c15_cpar = 1; |
| } |
| #else |
| /* SVC mode with interrupts disabled. */ |
| env->uncached_cpsr = ARM_CPU_MODE_SVC | CPSR_A | CPSR_F | CPSR_I; |
| /* On ARMv7-M the CPSR_I is the value of the PRIMASK register, and is |
| clear at reset. Initial SP and PC are loaded from ROM. */ |
| if (IS_M(env)) { |
| uint32_t pc; |
| uint8_t *rom; |
| env->uncached_cpsr &= ~CPSR_I; |
| rom = rom_ptr(0); |
| if (rom) { |
| /* We should really use ldl_phys here, in case the guest |
| modified flash and reset itself. However images |
| loaded via -kernel have not been copied yet, so load the |
| values directly from there. */ |
| env->regs[13] = ldl_p(rom); |
| pc = ldl_p(rom + 4); |
| env->thumb = pc & 1; |
| env->regs[15] = pc & ~1; |
| } |
| } |
| env->vfp.xregs[ARM_VFP_FPEXC] = 0; |
| #endif |
| set_flush_to_zero(1, &env->vfp.standard_fp_status); |
| set_flush_inputs_to_zero(1, &env->vfp.standard_fp_status); |
| set_default_nan_mode(1, &env->vfp.standard_fp_status); |
| set_float_detect_tininess(float_tininess_before_rounding, |
| &env->vfp.fp_status); |
| set_float_detect_tininess(float_tininess_before_rounding, |
| &env->vfp.standard_fp_status); |
| tlb_flush(env, 1); |
| /* Reset is a state change for some CPUARMState fields which we |
| * bake assumptions about into translated code, so we need to |
| * tb_flush(). |
| */ |
| tb_flush(env); |
| } |
| |
| static inline void set_feature(CPUARMState *env, int feature) |
| { |
| env->features |= 1u << feature; |
| } |
| |
| static void arm_cpu_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| |
| cpu_exec_init(&cpu->env); |
| cpu->cp_regs = g_hash_table_new_full(g_int_hash, g_int_equal, |
| g_free, g_free); |
| } |
| |
| static void arm_cpu_finalizefn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| g_hash_table_destroy(cpu->cp_regs); |
| } |
| |
| void arm_cpu_realize(ARMCPU *cpu) |
| { |
| /* This function is called by cpu_arm_init() because it |
| * needs to do common actions based on feature bits, etc |
| * that have been set by the subclass init functions. |
| * When we have QOM realize support it should become |
| * a true realize function instead. |
| */ |
| CPUARMState *env = &cpu->env; |
| /* Some features automatically imply others: */ |
| if (arm_feature(env, ARM_FEATURE_V7)) { |
| set_feature(env, ARM_FEATURE_VAPA); |
| set_feature(env, ARM_FEATURE_THUMB2); |
| set_feature(env, ARM_FEATURE_MPIDR); |
| if (!arm_feature(env, ARM_FEATURE_M)) { |
| set_feature(env, ARM_FEATURE_V6K); |
| } else { |
| set_feature(env, ARM_FEATURE_V6); |
| } |
| } |
| if (arm_feature(env, ARM_FEATURE_V6K)) { |
| set_feature(env, ARM_FEATURE_V6); |
| set_feature(env, ARM_FEATURE_MVFR); |
| } |
| if (arm_feature(env, ARM_FEATURE_V6)) { |
| set_feature(env, ARM_FEATURE_V5); |
| if (!arm_feature(env, ARM_FEATURE_M)) { |
| set_feature(env, ARM_FEATURE_AUXCR); |
| } |
| } |
| if (arm_feature(env, ARM_FEATURE_V5)) { |
| set_feature(env, ARM_FEATURE_V4T); |
| } |
| if (arm_feature(env, ARM_FEATURE_M)) { |
| set_feature(env, ARM_FEATURE_THUMB_DIV); |
| } |
| if (arm_feature(env, ARM_FEATURE_ARM_DIV)) { |
| set_feature(env, ARM_FEATURE_THUMB_DIV); |
| } |
| if (arm_feature(env, ARM_FEATURE_VFP4)) { |
| set_feature(env, ARM_FEATURE_VFP3); |
| } |
| if (arm_feature(env, ARM_FEATURE_VFP3)) { |
| set_feature(env, ARM_FEATURE_VFP); |
| } |
| |
| register_cp_regs_for_features(cpu); |
| } |
| |
| /* CPU models */ |
| |
| static void arm926_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_VFP); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_TEST_CLEAN); |
| cpu->midr = ARM_CPUID_ARM926; |
| cpu->reset_fpsid = 0x41011090; |
| cpu->ctr = 0x1dd20d2; |
| cpu->reset_sctlr = 0x00090078; |
| } |
| |
| static void arm946_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_MPU); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| cpu->midr = ARM_CPUID_ARM946; |
| cpu->ctr = 0x0f004006; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void arm1026_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_VFP); |
| set_feature(&cpu->env, ARM_FEATURE_AUXCR); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_TEST_CLEAN); |
| cpu->midr = ARM_CPUID_ARM1026; |
| cpu->reset_fpsid = 0x410110a0; |
| cpu->ctr = 0x1dd20d2; |
| cpu->reset_sctlr = 0x00090078; |
| cpu->reset_auxcr = 1; |
| { |
| /* The 1026 had an IFAR at c6,c0,0,1 rather than the ARMv6 c6,c0,0,2 */ |
| ARMCPRegInfo ifar = { |
| .name = "IFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c6_insn), |
| .resetvalue = 0 |
| }; |
| define_one_arm_cp_reg(cpu, &ifar); |
| } |
| } |
| |
| static void arm1136_r2_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| /* What qemu calls "arm1136_r2" is actually the 1136 r0p2, ie an |
| * older core than plain "arm1136". In particular this does not |
| * have the v6K features. |
| * These ID register values are correct for 1136 but may be wrong |
| * for 1136_r2 (in particular r0p2 does not actually implement most |
| * of the ID registers). |
| */ |
| set_feature(&cpu->env, ARM_FEATURE_V6); |
| set_feature(&cpu->env, ARM_FEATURE_VFP); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS); |
| cpu->midr = ARM_CPUID_ARM1136_R2; |
| cpu->reset_fpsid = 0x410120b4; |
| cpu->mvfr0 = 0x11111111; |
| cpu->mvfr1 = 0x00000000; |
| cpu->ctr = 0x1dd20d2; |
| cpu->reset_sctlr = 0x00050078; |
| cpu->id_pfr0 = 0x111; |
| cpu->id_pfr1 = 0x1; |
| cpu->id_dfr0 = 0x2; |
| cpu->id_afr0 = 0x3; |
| cpu->id_mmfr0 = 0x01130003; |
| cpu->id_mmfr1 = 0x10030302; |
| cpu->id_mmfr2 = 0x01222110; |
| cpu->id_isar0 = 0x00140011; |
| cpu->id_isar1 = 0x12002111; |
| cpu->id_isar2 = 0x11231111; |
| cpu->id_isar3 = 0x01102131; |
| cpu->id_isar4 = 0x141; |
| cpu->reset_auxcr = 7; |
| } |
| |
| static void arm1136_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V6K); |
| set_feature(&cpu->env, ARM_FEATURE_V6); |
| set_feature(&cpu->env, ARM_FEATURE_VFP); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS); |
| cpu->midr = ARM_CPUID_ARM1136; |
| cpu->reset_fpsid = 0x410120b4; |
| cpu->mvfr0 = 0x11111111; |
| cpu->mvfr1 = 0x00000000; |
| cpu->ctr = 0x1dd20d2; |
| cpu->reset_sctlr = 0x00050078; |
| cpu->id_pfr0 = 0x111; |
| cpu->id_pfr1 = 0x1; |
| cpu->id_dfr0 = 0x2; |
| cpu->id_afr0 = 0x3; |
| cpu->id_mmfr0 = 0x01130003; |
| cpu->id_mmfr1 = 0x10030302; |
| cpu->id_mmfr2 = 0x01222110; |
| cpu->id_isar0 = 0x00140011; |
| cpu->id_isar1 = 0x12002111; |
| cpu->id_isar2 = 0x11231111; |
| cpu->id_isar3 = 0x01102131; |
| cpu->id_isar4 = 0x141; |
| cpu->reset_auxcr = 7; |
| } |
| |
| static void arm1176_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V6K); |
| set_feature(&cpu->env, ARM_FEATURE_VFP); |
| set_feature(&cpu->env, ARM_FEATURE_VAPA); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_DIRTY_REG); |
| set_feature(&cpu->env, ARM_FEATURE_CACHE_BLOCK_OPS); |
| cpu->midr = ARM_CPUID_ARM1176; |
| cpu->reset_fpsid = 0x410120b5; |
| cpu->mvfr0 = 0x11111111; |
| cpu->mvfr1 = 0x00000000; |
| cpu->ctr = 0x1dd20d2; |
| cpu->reset_sctlr = 0x00050078; |
| cpu->id_pfr0 = 0x111; |
| cpu->id_pfr1 = 0x11; |
| cpu->id_dfr0 = 0x33; |
| cpu->id_afr0 = 0; |
| cpu->id_mmfr0 = 0x01130003; |
| cpu->id_mmfr1 = 0x10030302; |
| cpu->id_mmfr2 = 0x01222100; |
| cpu->id_isar0 = 0x0140011; |
| cpu->id_isar1 = 0x12002111; |
| cpu->id_isar2 = 0x11231121; |
| cpu->id_isar3 = 0x01102131; |
| cpu->id_isar4 = 0x01141; |
| cpu->reset_auxcr = 7; |
| } |
| |
| static void arm11mpcore_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V6K); |
| set_feature(&cpu->env, ARM_FEATURE_VFP); |
| set_feature(&cpu->env, ARM_FEATURE_VAPA); |
| set_feature(&cpu->env, ARM_FEATURE_MPIDR); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| cpu->midr = ARM_CPUID_ARM11MPCORE; |
| cpu->reset_fpsid = 0x410120b4; |
| cpu->mvfr0 = 0x11111111; |
| cpu->mvfr1 = 0x00000000; |
| cpu->ctr = 0x1d192992; /* 32K icache 32K dcache */ |
| cpu->id_pfr0 = 0x111; |
| cpu->id_pfr1 = 0x1; |
| cpu->id_dfr0 = 0; |
| cpu->id_afr0 = 0x2; |
| cpu->id_mmfr0 = 0x01100103; |
| cpu->id_mmfr1 = 0x10020302; |
| cpu->id_mmfr2 = 0x01222000; |
| cpu->id_isar0 = 0x00100011; |
| cpu->id_isar1 = 0x12002111; |
| cpu->id_isar2 = 0x11221011; |
| cpu->id_isar3 = 0x01102131; |
| cpu->id_isar4 = 0x141; |
| cpu->reset_auxcr = 1; |
| } |
| |
| static void cortex_m3_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V7); |
| set_feature(&cpu->env, ARM_FEATURE_M); |
| cpu->midr = ARM_CPUID_CORTEXM3; |
| } |
| |
| static const ARMCPRegInfo cortexa8_cp_reginfo[] = { |
| { .name = "L2LOCKDOWN", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 0, |
| .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "L2AUXCR", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 2, |
| .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| |
| static void cortex_a8_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V7); |
| set_feature(&cpu->env, ARM_FEATURE_VFP3); |
| set_feature(&cpu->env, ARM_FEATURE_NEON); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| cpu->midr = ARM_CPUID_CORTEXA8; |
| cpu->reset_fpsid = 0x410330c0; |
| cpu->mvfr0 = 0x11110222; |
| cpu->mvfr1 = 0x00011100; |
| cpu->ctr = 0x82048004; |
| cpu->reset_sctlr = 0x00c50078; |
| cpu->id_pfr0 = 0x1031; |
| cpu->id_pfr1 = 0x11; |
| cpu->id_dfr0 = 0x400; |
| cpu->id_afr0 = 0; |
| cpu->id_mmfr0 = 0x31100003; |
| cpu->id_mmfr1 = 0x20000000; |
| cpu->id_mmfr2 = 0x01202000; |
| cpu->id_mmfr3 = 0x11; |
| cpu->id_isar0 = 0x00101111; |
| cpu->id_isar1 = 0x12112111; |
| cpu->id_isar2 = 0x21232031; |
| cpu->id_isar3 = 0x11112131; |
| cpu->id_isar4 = 0x00111142; |
| cpu->clidr = (1 << 27) | (2 << 24) | 3; |
| cpu->ccsidr[0] = 0xe007e01a; /* 16k L1 dcache. */ |
| cpu->ccsidr[1] = 0x2007e01a; /* 16k L1 icache. */ |
| cpu->ccsidr[2] = 0xf0000000; /* No L2 icache. */ |
| cpu->reset_auxcr = 2; |
| define_arm_cp_regs(cpu, cortexa8_cp_reginfo); |
| } |
| |
| static const ARMCPRegInfo cortexa9_cp_reginfo[] = { |
| /* power_control should be set to maximum latency. Again, |
| * default to 0 and set by private hook |
| */ |
| { .name = "A9_PWRCTL", .cp = 15, .crn = 15, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_power_control) }, |
| { .name = "A9_DIAG", .cp = 15, .crn = 15, .crm = 0, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_diagnostic) }, |
| { .name = "A9_PWRDIAG", .cp = 15, .crn = 15, .crm = 0, .opc1 = 0, .opc2 = 2, |
| .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_power_diagnostic) }, |
| { .name = "NEONBUSY", .cp = 15, .crn = 15, .crm = 1, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .resetvalue = 0, .type = ARM_CP_CONST }, |
| /* TLB lockdown control */ |
| { .name = "TLB_LOCKR", .cp = 15, .crn = 15, .crm = 4, .opc1 = 5, .opc2 = 2, |
| .access = PL1_W, .resetvalue = 0, .type = ARM_CP_NOP }, |
| { .name = "TLB_LOCKW", .cp = 15, .crn = 15, .crm = 4, .opc1 = 5, .opc2 = 4, |
| .access = PL1_W, .resetvalue = 0, .type = ARM_CP_NOP }, |
| { .name = "TLB_VA", .cp = 15, .crn = 15, .crm = 5, .opc1 = 5, .opc2 = 2, |
| .access = PL1_RW, .resetvalue = 0, .type = ARM_CP_CONST }, |
| { .name = "TLB_PA", .cp = 15, .crn = 15, .crm = 6, .opc1 = 5, .opc2 = 2, |
| .access = PL1_RW, .resetvalue = 0, .type = ARM_CP_CONST }, |
| { .name = "TLB_ATTR", .cp = 15, .crn = 15, .crm = 7, .opc1 = 5, .opc2 = 2, |
| .access = PL1_RW, .resetvalue = 0, .type = ARM_CP_CONST }, |
| REGINFO_SENTINEL |
| }; |
| |
| static void cortex_a9_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V7); |
| set_feature(&cpu->env, ARM_FEATURE_VFP3); |
| set_feature(&cpu->env, ARM_FEATURE_VFP_FP16); |
| set_feature(&cpu->env, ARM_FEATURE_NEON); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); |
| /* Note that A9 supports the MP extensions even for |
| * A9UP and single-core A9MP (which are both different |
| * and valid configurations; we don't model A9UP). |
| */ |
| set_feature(&cpu->env, ARM_FEATURE_V7MP); |
| cpu->midr = ARM_CPUID_CORTEXA9; |
| cpu->reset_fpsid = 0x41033090; |
| cpu->mvfr0 = 0x11110222; |
| cpu->mvfr1 = 0x01111111; |
| cpu->ctr = 0x80038003; |
| cpu->reset_sctlr = 0x00c50078; |
| cpu->id_pfr0 = 0x1031; |
| cpu->id_pfr1 = 0x11; |
| cpu->id_dfr0 = 0x000; |
| cpu->id_afr0 = 0; |
| cpu->id_mmfr0 = 0x00100103; |
| cpu->id_mmfr1 = 0x20000000; |
| cpu->id_mmfr2 = 0x01230000; |
| cpu->id_mmfr3 = 0x00002111; |
| cpu->id_isar0 = 0x00101111; |
| cpu->id_isar1 = 0x13112111; |
| cpu->id_isar2 = 0x21232041; |
| cpu->id_isar3 = 0x11112131; |
| cpu->id_isar4 = 0x00111142; |
| cpu->clidr = (1 << 27) | (1 << 24) | 3; |
| cpu->ccsidr[0] = 0xe00fe015; /* 16k L1 dcache. */ |
| cpu->ccsidr[1] = 0x200fe015; /* 16k L1 icache. */ |
| { |
| ARMCPRegInfo cbar = { |
| .name = "CBAR", .cp = 15, .crn = 15, .crm = 0, .opc1 = 4, |
| .opc2 = 0, .access = PL1_R|PL3_W, .resetvalue = cpu->reset_cbar, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_config_base_address) |
| }; |
| define_one_arm_cp_reg(cpu, &cbar); |
| define_arm_cp_regs(cpu, cortexa9_cp_reginfo); |
| } |
| } |
| |
| #ifndef CONFIG_USER_ONLY |
| static int a15_l2ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t *value) |
| { |
| /* Linux wants the number of processors from here. |
| * Might as well set the interrupt-controller bit too. |
| */ |
| *value = ((smp_cpus - 1) << 24) | (1 << 23); |
| return 0; |
| } |
| #endif |
| |
| static const ARMCPRegInfo cortexa15_cp_reginfo[] = { |
| #ifndef CONFIG_USER_ONLY |
| { .name = "L2CTLR", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 2, |
| .access = PL1_RW, .resetvalue = 0, .readfn = a15_l2ctlr_read, |
| .writefn = arm_cp_write_ignore, }, |
| #endif |
| { .name = "L2ECTLR", .cp = 15, .crn = 9, .crm = 0, .opc1 = 1, .opc2 = 3, |
| .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| |
| static void cortex_a15_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V7); |
| set_feature(&cpu->env, ARM_FEATURE_VFP4); |
| set_feature(&cpu->env, ARM_FEATURE_VFP_FP16); |
| set_feature(&cpu->env, ARM_FEATURE_NEON); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); |
| set_feature(&cpu->env, ARM_FEATURE_ARM_DIV); |
| set_feature(&cpu->env, ARM_FEATURE_V7MP); |
| set_feature(&cpu->env, ARM_FEATURE_GENERIC_TIMER); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| cpu->midr = ARM_CPUID_CORTEXA15; |
| cpu->reset_fpsid = 0x410430f0; |
| cpu->mvfr0 = 0x10110222; |
| cpu->mvfr1 = 0x11111111; |
| cpu->ctr = 0x8444c004; |
| cpu->reset_sctlr = 0x00c50078; |
| cpu->id_pfr0 = 0x00001131; |
| cpu->id_pfr1 = 0x00011011; |
| cpu->id_dfr0 = 0x02010555; |
| cpu->id_afr0 = 0x00000000; |
| cpu->id_mmfr0 = 0x10201105; |
| cpu->id_mmfr1 = 0x20000000; |
| cpu->id_mmfr2 = 0x01240000; |
| cpu->id_mmfr3 = 0x02102211; |
| cpu->id_isar0 = 0x02101110; |
| cpu->id_isar1 = 0x13112111; |
| cpu->id_isar2 = 0x21232041; |
| cpu->id_isar3 = 0x11112131; |
| cpu->id_isar4 = 0x10011142; |
| cpu->clidr = 0x0a200023; |
| cpu->ccsidr[0] = 0x701fe00a; /* 32K L1 dcache */ |
| cpu->ccsidr[1] = 0x201fe00a; /* 32K L1 icache */ |
| cpu->ccsidr[2] = 0x711fe07a; /* 4096K L2 unified cache */ |
| define_arm_cp_regs(cpu, cortexa15_cp_reginfo); |
| } |
| |
| static void ti925t_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V4T); |
| set_feature(&cpu->env, ARM_FEATURE_OMAPCP); |
| cpu->midr = ARM_CPUID_TI925T; |
| cpu->ctr = 0x5109149; |
| cpu->reset_sctlr = 0x00000070; |
| } |
| |
| static void sa1100_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_STRONGARM); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| cpu->midr = ARM_CPUID_SA1100; |
| cpu->reset_sctlr = 0x00000070; |
| } |
| |
| static void sa1110_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_STRONGARM); |
| set_feature(&cpu->env, ARM_FEATURE_DUMMY_C15_REGS); |
| cpu->midr = ARM_CPUID_SA1110; |
| cpu->reset_sctlr = 0x00000070; |
| } |
| |
| static void pxa250_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| cpu->midr = ARM_CPUID_PXA250; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa255_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| cpu->midr = ARM_CPUID_PXA255; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa260_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| cpu->midr = ARM_CPUID_PXA260; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa261_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| cpu->midr = ARM_CPUID_PXA261; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa262_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| cpu->midr = ARM_CPUID_PXA262; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa270a0_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| set_feature(&cpu->env, ARM_FEATURE_IWMMXT); |
| cpu->midr = ARM_CPUID_PXA270_A0; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa270a1_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| set_feature(&cpu->env, ARM_FEATURE_IWMMXT); |
| cpu->midr = ARM_CPUID_PXA270_A1; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa270b0_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| set_feature(&cpu->env, ARM_FEATURE_IWMMXT); |
| cpu->midr = ARM_CPUID_PXA270_B0; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa270b1_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| set_feature(&cpu->env, ARM_FEATURE_IWMMXT); |
| cpu->midr = ARM_CPUID_PXA270_B1; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa270c0_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| set_feature(&cpu->env, ARM_FEATURE_IWMMXT); |
| cpu->midr = ARM_CPUID_PXA270_C0; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void pxa270c5_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V5); |
| set_feature(&cpu->env, ARM_FEATURE_XSCALE); |
| set_feature(&cpu->env, ARM_FEATURE_IWMMXT); |
| cpu->midr = ARM_CPUID_PXA270_C5; |
| cpu->ctr = 0xd172172; |
| cpu->reset_sctlr = 0x00000078; |
| } |
| |
| static void arm_any_initfn(Object *obj) |
| { |
| ARMCPU *cpu = ARM_CPU(obj); |
| set_feature(&cpu->env, ARM_FEATURE_V7); |
| set_feature(&cpu->env, ARM_FEATURE_VFP4); |
| set_feature(&cpu->env, ARM_FEATURE_VFP_FP16); |
| set_feature(&cpu->env, ARM_FEATURE_NEON); |
| set_feature(&cpu->env, ARM_FEATURE_THUMB2EE); |
| set_feature(&cpu->env, ARM_FEATURE_ARM_DIV); |
| set_feature(&cpu->env, ARM_FEATURE_V7MP); |
| cpu->midr = ARM_CPUID_ANY; |
| } |
| |
| typedef struct ARMCPUInfo { |
| const char *name; |
| void (*initfn)(Object *obj); |
| } ARMCPUInfo; |
| |
| static const ARMCPUInfo arm_cpus[] = { |
| { .name = "arm926", .initfn = arm926_initfn }, |
| { .name = "arm946", .initfn = arm946_initfn }, |
| { .name = "arm1026", .initfn = arm1026_initfn }, |
| /* What QEMU calls "arm1136-r2" is actually the 1136 r0p2, i.e. an |
| * older core than plain "arm1136". In particular this does not |
| * have the v6K features. |
| */ |
| { .name = "arm1136-r2", .initfn = arm1136_r2_initfn }, |
| { .name = "arm1136", .initfn = arm1136_initfn }, |
| { .name = "arm1176", .initfn = arm1176_initfn }, |
| { .name = "arm11mpcore", .initfn = arm11mpcore_initfn }, |
| { .name = "cortex-m3", .initfn = cortex_m3_initfn }, |
| { .name = "cortex-a8", .initfn = cortex_a8_initfn }, |
| { .name = "cortex-a9", .initfn = cortex_a9_initfn }, |
| { .name = "cortex-a15", .initfn = cortex_a15_initfn }, |
| { .name = "ti925t", .initfn = ti925t_initfn }, |
| { .name = "sa1100", .initfn = sa1100_initfn }, |
| { .name = "sa1110", .initfn = sa1110_initfn }, |
| { .name = "pxa250", .initfn = pxa250_initfn }, |
| { .name = "pxa255", .initfn = pxa255_initfn }, |
| { .name = "pxa260", .initfn = pxa260_initfn }, |
| { .name = "pxa261", .initfn = pxa261_initfn }, |
| { .name = "pxa262", .initfn = pxa262_initfn }, |
| /* "pxa270" is an alias for "pxa270-a0" */ |
| { .name = "pxa270", .initfn = pxa270a0_initfn }, |
| { .name = "pxa270-a0", .initfn = pxa270a0_initfn }, |
| { .name = "pxa270-a1", .initfn = pxa270a1_initfn }, |
| { .name = "pxa270-b0", .initfn = pxa270b0_initfn }, |
| { .name = "pxa270-b1", .initfn = pxa270b1_initfn }, |
| { .name = "pxa270-c0", .initfn = pxa270c0_initfn }, |
| { .name = "pxa270-c5", .initfn = pxa270c5_initfn }, |
| { .name = "any", .initfn = arm_any_initfn }, |
| }; |
| |
| static void arm_cpu_class_init(ObjectClass *oc, void *data) |
| { |
| ARMCPUClass *acc = ARM_CPU_CLASS(oc); |
| CPUClass *cc = CPU_CLASS(acc); |
| |
| acc->parent_reset = cc->reset; |
| cc->reset = arm_cpu_reset; |
| } |
| |
| static void cpu_register(const ARMCPUInfo *info) |
| { |
| TypeInfo type_info = { |
| .name = info->name, |
| .parent = TYPE_ARM_CPU, |
| .instance_size = sizeof(ARMCPU), |
| .instance_init = info->initfn, |
| .class_size = sizeof(ARMCPUClass), |
| }; |
| |
| type_register_static(&type_info); |
| } |
| |
| static const TypeInfo arm_cpu_type_info = { |
| .name = TYPE_ARM_CPU, |
| .parent = TYPE_CPU, |
| .instance_size = sizeof(ARMCPU), |
| .instance_init = arm_cpu_initfn, |
| .instance_finalize = arm_cpu_finalizefn, |
| .abstract = true, |
| .class_size = sizeof(ARMCPUClass), |
| .class_init = arm_cpu_class_init, |
| }; |
| |
| static void arm_cpu_register_types(void) |
| { |
| int i; |
| |
| type_register_static(&arm_cpu_type_info); |
| for (i = 0; i < ARRAY_SIZE(arm_cpus); i++) { |
| cpu_register(&arm_cpus[i]); |
| } |
| } |
| |
| type_init(arm_cpu_register_types) |