| /* | 
 |  * RDMA protocol and interfaces | 
 |  * | 
 |  * Copyright IBM, Corp. 2010-2013 | 
 |  * Copyright Red Hat, Inc. 2015-2016 | 
 |  * | 
 |  * Authors: | 
 |  *  Michael R. Hines <mrhines@us.ibm.com> | 
 |  *  Jiuxing Liu <jl@us.ibm.com> | 
 |  *  Daniel P. Berrange <berrange@redhat.com> | 
 |  * | 
 |  * This work is licensed under the terms of the GNU GPL, version 2 or | 
 |  * later.  See the COPYING file in the top-level directory. | 
 |  * | 
 |  */ | 
 |  | 
 | #include "qemu/osdep.h" | 
 | #include "qapi/error.h" | 
 | #include "qemu/cutils.h" | 
 | #include "exec/target_page.h" | 
 | #include "rdma.h" | 
 | #include "migration.h" | 
 | #include "migration-stats.h" | 
 | #include "qemu-file.h" | 
 | #include "ram.h" | 
 | #include "qemu/error-report.h" | 
 | #include "qemu/main-loop.h" | 
 | #include "qemu/module.h" | 
 | #include "qemu/rcu.h" | 
 | #include "qemu/sockets.h" | 
 | #include "qemu/bitmap.h" | 
 | #include "qemu/coroutine.h" | 
 | #include "exec/memory.h" | 
 | #include <sys/socket.h> | 
 | #include <netdb.h> | 
 | #include <arpa/inet.h> | 
 | #include <rdma/rdma_cma.h> | 
 | #include "trace.h" | 
 | #include "qom/object.h" | 
 | #include "options.h" | 
 | #include <poll.h> | 
 |  | 
 | #define RDMA_RESOLVE_TIMEOUT_MS 10000 | 
 |  | 
 | /* Do not merge data if larger than this. */ | 
 | #define RDMA_MERGE_MAX (2 * 1024 * 1024) | 
 | #define RDMA_SIGNALED_SEND_MAX (RDMA_MERGE_MAX / 4096) | 
 |  | 
 | #define RDMA_REG_CHUNK_SHIFT 20 /* 1 MB */ | 
 |  | 
 | /* | 
 |  * This is only for non-live state being migrated. | 
 |  * Instead of RDMA_WRITE messages, we use RDMA_SEND | 
 |  * messages for that state, which requires a different | 
 |  * delivery design than main memory. | 
 |  */ | 
 | #define RDMA_SEND_INCREMENT 32768 | 
 |  | 
 | /* | 
 |  * Maximum size infiniband SEND message | 
 |  */ | 
 | #define RDMA_CONTROL_MAX_BUFFER (512 * 1024) | 
 | #define RDMA_CONTROL_MAX_COMMANDS_PER_MESSAGE 4096 | 
 |  | 
 | #define RDMA_CONTROL_VERSION_CURRENT 1 | 
 | /* | 
 |  * Capabilities for negotiation. | 
 |  */ | 
 | #define RDMA_CAPABILITY_PIN_ALL 0x01 | 
 |  | 
 | /* | 
 |  * Add the other flags above to this list of known capabilities | 
 |  * as they are introduced. | 
 |  */ | 
 | static uint32_t known_capabilities = RDMA_CAPABILITY_PIN_ALL; | 
 |  | 
 | /* | 
 |  * A work request ID is 64-bits and we split up these bits | 
 |  * into 3 parts: | 
 |  * | 
 |  * bits 0-15 : type of control message, 2^16 | 
 |  * bits 16-29: ram block index, 2^14 | 
 |  * bits 30-63: ram block chunk number, 2^34 | 
 |  * | 
 |  * The last two bit ranges are only used for RDMA writes, | 
 |  * in order to track their completion and potentially | 
 |  * also track unregistration status of the message. | 
 |  */ | 
 | #define RDMA_WRID_TYPE_SHIFT  0UL | 
 | #define RDMA_WRID_BLOCK_SHIFT 16UL | 
 | #define RDMA_WRID_CHUNK_SHIFT 30UL | 
 |  | 
 | #define RDMA_WRID_TYPE_MASK \ | 
 |     ((1UL << RDMA_WRID_BLOCK_SHIFT) - 1UL) | 
 |  | 
 | #define RDMA_WRID_BLOCK_MASK \ | 
 |     (~RDMA_WRID_TYPE_MASK & ((1UL << RDMA_WRID_CHUNK_SHIFT) - 1UL)) | 
 |  | 
 | #define RDMA_WRID_CHUNK_MASK (~RDMA_WRID_BLOCK_MASK & ~RDMA_WRID_TYPE_MASK) | 
 |  | 
 | /* | 
 |  * RDMA migration protocol: | 
 |  * 1. RDMA Writes (data messages, i.e. RAM) | 
 |  * 2. IB Send/Recv (control channel messages) | 
 |  */ | 
 | enum { | 
 |     RDMA_WRID_NONE = 0, | 
 |     RDMA_WRID_RDMA_WRITE = 1, | 
 |     RDMA_WRID_SEND_CONTROL = 2000, | 
 |     RDMA_WRID_RECV_CONTROL = 4000, | 
 | }; | 
 |  | 
 | /* | 
 |  * Work request IDs for IB SEND messages only (not RDMA writes). | 
 |  * This is used by the migration protocol to transmit | 
 |  * control messages (such as device state and registration commands) | 
 |  * | 
 |  * We could use more WRs, but we have enough for now. | 
 |  */ | 
 | enum { | 
 |     RDMA_WRID_READY = 0, | 
 |     RDMA_WRID_DATA, | 
 |     RDMA_WRID_CONTROL, | 
 |     RDMA_WRID_MAX, | 
 | }; | 
 |  | 
 | /* | 
 |  * SEND/RECV IB Control Messages. | 
 |  */ | 
 | enum { | 
 |     RDMA_CONTROL_NONE = 0, | 
 |     RDMA_CONTROL_ERROR, | 
 |     RDMA_CONTROL_READY,               /* ready to receive */ | 
 |     RDMA_CONTROL_QEMU_FILE,           /* QEMUFile-transmitted bytes */ | 
 |     RDMA_CONTROL_RAM_BLOCKS_REQUEST,  /* RAMBlock synchronization */ | 
 |     RDMA_CONTROL_RAM_BLOCKS_RESULT,   /* RAMBlock synchronization */ | 
 |     RDMA_CONTROL_COMPRESS,            /* page contains repeat values */ | 
 |     RDMA_CONTROL_REGISTER_REQUEST,    /* dynamic page registration */ | 
 |     RDMA_CONTROL_REGISTER_RESULT,     /* key to use after registration */ | 
 |     RDMA_CONTROL_REGISTER_FINISHED,   /* current iteration finished */ | 
 |     RDMA_CONTROL_UNREGISTER_REQUEST,  /* dynamic UN-registration */ | 
 |     RDMA_CONTROL_UNREGISTER_FINISHED, /* unpinning finished */ | 
 | }; | 
 |  | 
 |  | 
 | /* | 
 |  * Memory and MR structures used to represent an IB Send/Recv work request. | 
 |  * This is *not* used for RDMA writes, only IB Send/Recv. | 
 |  */ | 
 | typedef struct { | 
 |     uint8_t  control[RDMA_CONTROL_MAX_BUFFER]; /* actual buffer to register */ | 
 |     struct   ibv_mr *control_mr;               /* registration metadata */ | 
 |     size_t   control_len;                      /* length of the message */ | 
 |     uint8_t *control_curr;                     /* start of unconsumed bytes */ | 
 | } RDMAWorkRequestData; | 
 |  | 
 | /* | 
 |  * Negotiate RDMA capabilities during connection-setup time. | 
 |  */ | 
 | typedef struct { | 
 |     uint32_t version; | 
 |     uint32_t flags; | 
 | } RDMACapabilities; | 
 |  | 
 | static void caps_to_network(RDMACapabilities *cap) | 
 | { | 
 |     cap->version = htonl(cap->version); | 
 |     cap->flags = htonl(cap->flags); | 
 | } | 
 |  | 
 | static void network_to_caps(RDMACapabilities *cap) | 
 | { | 
 |     cap->version = ntohl(cap->version); | 
 |     cap->flags = ntohl(cap->flags); | 
 | } | 
 |  | 
 | /* | 
 |  * Representation of a RAMBlock from an RDMA perspective. | 
 |  * This is not transmitted, only local. | 
 |  * This and subsequent structures cannot be linked lists | 
 |  * because we're using a single IB message to transmit | 
 |  * the information. It's small anyway, so a list is overkill. | 
 |  */ | 
 | typedef struct RDMALocalBlock { | 
 |     char          *block_name; | 
 |     uint8_t       *local_host_addr; /* local virtual address */ | 
 |     uint64_t       remote_host_addr; /* remote virtual address */ | 
 |     uint64_t       offset; | 
 |     uint64_t       length; | 
 |     struct         ibv_mr **pmr;    /* MRs for chunk-level registration */ | 
 |     struct         ibv_mr *mr;      /* MR for non-chunk-level registration */ | 
 |     uint32_t      *remote_keys;     /* rkeys for chunk-level registration */ | 
 |     uint32_t       remote_rkey;     /* rkeys for non-chunk-level registration */ | 
 |     int            index;           /* which block are we */ | 
 |     unsigned int   src_index;       /* (Only used on dest) */ | 
 |     bool           is_ram_block; | 
 |     int            nb_chunks; | 
 |     unsigned long *transit_bitmap; | 
 |     unsigned long *unregister_bitmap; | 
 | } RDMALocalBlock; | 
 |  | 
 | /* | 
 |  * Also represents a RAMblock, but only on the dest. | 
 |  * This gets transmitted by the dest during connection-time | 
 |  * to the source VM and then is used to populate the | 
 |  * corresponding RDMALocalBlock with | 
 |  * the information needed to perform the actual RDMA. | 
 |  */ | 
 | typedef struct QEMU_PACKED RDMADestBlock { | 
 |     uint64_t remote_host_addr; | 
 |     uint64_t offset; | 
 |     uint64_t length; | 
 |     uint32_t remote_rkey; | 
 |     uint32_t padding; | 
 | } RDMADestBlock; | 
 |  | 
 | static const char *control_desc(unsigned int rdma_control) | 
 | { | 
 |     static const char *strs[] = { | 
 |         [RDMA_CONTROL_NONE] = "NONE", | 
 |         [RDMA_CONTROL_ERROR] = "ERROR", | 
 |         [RDMA_CONTROL_READY] = "READY", | 
 |         [RDMA_CONTROL_QEMU_FILE] = "QEMU FILE", | 
 |         [RDMA_CONTROL_RAM_BLOCKS_REQUEST] = "RAM BLOCKS REQUEST", | 
 |         [RDMA_CONTROL_RAM_BLOCKS_RESULT] = "RAM BLOCKS RESULT", | 
 |         [RDMA_CONTROL_COMPRESS] = "COMPRESS", | 
 |         [RDMA_CONTROL_REGISTER_REQUEST] = "REGISTER REQUEST", | 
 |         [RDMA_CONTROL_REGISTER_RESULT] = "REGISTER RESULT", | 
 |         [RDMA_CONTROL_REGISTER_FINISHED] = "REGISTER FINISHED", | 
 |         [RDMA_CONTROL_UNREGISTER_REQUEST] = "UNREGISTER REQUEST", | 
 |         [RDMA_CONTROL_UNREGISTER_FINISHED] = "UNREGISTER FINISHED", | 
 |     }; | 
 |  | 
 |     if (rdma_control > RDMA_CONTROL_UNREGISTER_FINISHED) { | 
 |         return "??BAD CONTROL VALUE??"; | 
 |     } | 
 |  | 
 |     return strs[rdma_control]; | 
 | } | 
 |  | 
 | #if !defined(htonll) | 
 | static uint64_t htonll(uint64_t v) | 
 | { | 
 |     union { uint32_t lv[2]; uint64_t llv; } u; | 
 |     u.lv[0] = htonl(v >> 32); | 
 |     u.lv[1] = htonl(v & 0xFFFFFFFFULL); | 
 |     return u.llv; | 
 | } | 
 | #endif | 
 |  | 
 | #if !defined(ntohll) | 
 | static uint64_t ntohll(uint64_t v) | 
 | { | 
 |     union { uint32_t lv[2]; uint64_t llv; } u; | 
 |     u.llv = v; | 
 |     return ((uint64_t)ntohl(u.lv[0]) << 32) | (uint64_t) ntohl(u.lv[1]); | 
 | } | 
 | #endif | 
 |  | 
 | static void dest_block_to_network(RDMADestBlock *db) | 
 | { | 
 |     db->remote_host_addr = htonll(db->remote_host_addr); | 
 |     db->offset = htonll(db->offset); | 
 |     db->length = htonll(db->length); | 
 |     db->remote_rkey = htonl(db->remote_rkey); | 
 | } | 
 |  | 
 | static void network_to_dest_block(RDMADestBlock *db) | 
 | { | 
 |     db->remote_host_addr = ntohll(db->remote_host_addr); | 
 |     db->offset = ntohll(db->offset); | 
 |     db->length = ntohll(db->length); | 
 |     db->remote_rkey = ntohl(db->remote_rkey); | 
 | } | 
 |  | 
 | /* | 
 |  * Virtual address of the above structures used for transmitting | 
 |  * the RAMBlock descriptions at connection-time. | 
 |  * This structure is *not* transmitted. | 
 |  */ | 
 | typedef struct RDMALocalBlocks { | 
 |     int nb_blocks; | 
 |     bool     init;             /* main memory init complete */ | 
 |     RDMALocalBlock *block; | 
 | } RDMALocalBlocks; | 
 |  | 
 | /* | 
 |  * Main data structure for RDMA state. | 
 |  * While there is only one copy of this structure being allocated right now, | 
 |  * this is the place where one would start if you wanted to consider | 
 |  * having more than one RDMA connection open at the same time. | 
 |  */ | 
 | typedef struct RDMAContext { | 
 |     char *host; | 
 |     int port; | 
 |  | 
 |     RDMAWorkRequestData wr_data[RDMA_WRID_MAX]; | 
 |  | 
 |     /* | 
 |      * This is used by *_exchange_send() to figure out whether or not | 
 |      * the initial "READY" message has already been received or not. | 
 |      * This is because other functions may potentially poll() and detect | 
 |      * the READY message before send() does, in which case we need to | 
 |      * know if it completed. | 
 |      */ | 
 |     int control_ready_expected; | 
 |  | 
 |     /* number of outstanding writes */ | 
 |     int nb_sent; | 
 |  | 
 |     /* store info about current buffer so that we can | 
 |        merge it with future sends */ | 
 |     uint64_t current_addr; | 
 |     uint64_t current_length; | 
 |     /* index of ram block the current buffer belongs to */ | 
 |     int current_index; | 
 |     /* index of the chunk in the current ram block */ | 
 |     int current_chunk; | 
 |  | 
 |     bool pin_all; | 
 |  | 
 |     /* | 
 |      * infiniband-specific variables for opening the device | 
 |      * and maintaining connection state and so forth. | 
 |      * | 
 |      * cm_id also has ibv_context, rdma_event_channel, and ibv_qp in | 
 |      * cm_id->verbs, cm_id->channel, and cm_id->qp. | 
 |      */ | 
 |     struct rdma_cm_id *cm_id;               /* connection manager ID */ | 
 |     struct rdma_cm_id *listen_id; | 
 |     bool connected; | 
 |  | 
 |     struct ibv_context          *verbs; | 
 |     struct rdma_event_channel   *channel; | 
 |     struct ibv_qp *qp;                      /* queue pair */ | 
 |     struct ibv_comp_channel *recv_comp_channel;  /* recv completion channel */ | 
 |     struct ibv_comp_channel *send_comp_channel;  /* send completion channel */ | 
 |     struct ibv_pd *pd;                      /* protection domain */ | 
 |     struct ibv_cq *recv_cq;                 /* recvieve completion queue */ | 
 |     struct ibv_cq *send_cq;                 /* send completion queue */ | 
 |  | 
 |     /* | 
 |      * If a previous write failed (perhaps because of a failed | 
 |      * memory registration, then do not attempt any future work | 
 |      * and remember the error state. | 
 |      */ | 
 |     bool errored; | 
 |     bool error_reported; | 
 |     bool received_error; | 
 |  | 
 |     /* | 
 |      * Description of ram blocks used throughout the code. | 
 |      */ | 
 |     RDMALocalBlocks local_ram_blocks; | 
 |     RDMADestBlock  *dest_blocks; | 
 |  | 
 |     /* Index of the next RAMBlock received during block registration */ | 
 |     unsigned int    next_src_index; | 
 |  | 
 |     /* | 
 |      * Migration on *destination* started. | 
 |      * Then use coroutine yield function. | 
 |      * Source runs in a thread, so we don't care. | 
 |      */ | 
 |     int migration_started_on_destination; | 
 |  | 
 |     int total_registrations; | 
 |     int total_writes; | 
 |  | 
 |     int unregister_current, unregister_next; | 
 |     uint64_t unregistrations[RDMA_SIGNALED_SEND_MAX]; | 
 |  | 
 |     GHashTable *blockmap; | 
 |  | 
 |     /* the RDMAContext for return path */ | 
 |     struct RDMAContext *return_path; | 
 |     bool is_return_path; | 
 | } RDMAContext; | 
 |  | 
 | #define TYPE_QIO_CHANNEL_RDMA "qio-channel-rdma" | 
 | OBJECT_DECLARE_SIMPLE_TYPE(QIOChannelRDMA, QIO_CHANNEL_RDMA) | 
 |  | 
 |  | 
 |  | 
 | struct QIOChannelRDMA { | 
 |     QIOChannel parent; | 
 |     RDMAContext *rdmain; | 
 |     RDMAContext *rdmaout; | 
 |     QEMUFile *file; | 
 |     bool blocking; /* XXX we don't actually honour this yet */ | 
 | }; | 
 |  | 
 | /* | 
 |  * Main structure for IB Send/Recv control messages. | 
 |  * This gets prepended at the beginning of every Send/Recv. | 
 |  */ | 
 | typedef struct QEMU_PACKED { | 
 |     uint32_t len;     /* Total length of data portion */ | 
 |     uint32_t type;    /* which control command to perform */ | 
 |     uint32_t repeat;  /* number of commands in data portion of same type */ | 
 |     uint32_t padding; | 
 | } RDMAControlHeader; | 
 |  | 
 | static void control_to_network(RDMAControlHeader *control) | 
 | { | 
 |     control->type = htonl(control->type); | 
 |     control->len = htonl(control->len); | 
 |     control->repeat = htonl(control->repeat); | 
 | } | 
 |  | 
 | static void network_to_control(RDMAControlHeader *control) | 
 | { | 
 |     control->type = ntohl(control->type); | 
 |     control->len = ntohl(control->len); | 
 |     control->repeat = ntohl(control->repeat); | 
 | } | 
 |  | 
 | /* | 
 |  * Register a single Chunk. | 
 |  * Information sent by the source VM to inform the dest | 
 |  * to register an single chunk of memory before we can perform | 
 |  * the actual RDMA operation. | 
 |  */ | 
 | typedef struct QEMU_PACKED { | 
 |     union QEMU_PACKED { | 
 |         uint64_t current_addr;  /* offset into the ram_addr_t space */ | 
 |         uint64_t chunk;         /* chunk to lookup if unregistering */ | 
 |     } key; | 
 |     uint32_t current_index; /* which ramblock the chunk belongs to */ | 
 |     uint32_t padding; | 
 |     uint64_t chunks;            /* how many sequential chunks to register */ | 
 | } RDMARegister; | 
 |  | 
 | static bool rdma_errored(RDMAContext *rdma) | 
 | { | 
 |     if (rdma->errored && !rdma->error_reported) { | 
 |         error_report("RDMA is in an error state waiting migration" | 
 |                      " to abort!"); | 
 |         rdma->error_reported = true; | 
 |     } | 
 |     return rdma->errored; | 
 | } | 
 |  | 
 | static void register_to_network(RDMAContext *rdma, RDMARegister *reg) | 
 | { | 
 |     RDMALocalBlock *local_block; | 
 |     local_block  = &rdma->local_ram_blocks.block[reg->current_index]; | 
 |  | 
 |     if (local_block->is_ram_block) { | 
 |         /* | 
 |          * current_addr as passed in is an address in the local ram_addr_t | 
 |          * space, we need to translate this for the destination | 
 |          */ | 
 |         reg->key.current_addr -= local_block->offset; | 
 |         reg->key.current_addr += rdma->dest_blocks[reg->current_index].offset; | 
 |     } | 
 |     reg->key.current_addr = htonll(reg->key.current_addr); | 
 |     reg->current_index = htonl(reg->current_index); | 
 |     reg->chunks = htonll(reg->chunks); | 
 | } | 
 |  | 
 | static void network_to_register(RDMARegister *reg) | 
 | { | 
 |     reg->key.current_addr = ntohll(reg->key.current_addr); | 
 |     reg->current_index = ntohl(reg->current_index); | 
 |     reg->chunks = ntohll(reg->chunks); | 
 | } | 
 |  | 
 | typedef struct QEMU_PACKED { | 
 |     uint32_t value;     /* if zero, we will madvise() */ | 
 |     uint32_t block_idx; /* which ram block index */ | 
 |     uint64_t offset;    /* Address in remote ram_addr_t space */ | 
 |     uint64_t length;    /* length of the chunk */ | 
 | } RDMACompress; | 
 |  | 
 | static void compress_to_network(RDMAContext *rdma, RDMACompress *comp) | 
 | { | 
 |     comp->value = htonl(comp->value); | 
 |     /* | 
 |      * comp->offset as passed in is an address in the local ram_addr_t | 
 |      * space, we need to translate this for the destination | 
 |      */ | 
 |     comp->offset -= rdma->local_ram_blocks.block[comp->block_idx].offset; | 
 |     comp->offset += rdma->dest_blocks[comp->block_idx].offset; | 
 |     comp->block_idx = htonl(comp->block_idx); | 
 |     comp->offset = htonll(comp->offset); | 
 |     comp->length = htonll(comp->length); | 
 | } | 
 |  | 
 | static void network_to_compress(RDMACompress *comp) | 
 | { | 
 |     comp->value = ntohl(comp->value); | 
 |     comp->block_idx = ntohl(comp->block_idx); | 
 |     comp->offset = ntohll(comp->offset); | 
 |     comp->length = ntohll(comp->length); | 
 | } | 
 |  | 
 | /* | 
 |  * The result of the dest's memory registration produces an "rkey" | 
 |  * which the source VM must reference in order to perform | 
 |  * the RDMA operation. | 
 |  */ | 
 | typedef struct QEMU_PACKED { | 
 |     uint32_t rkey; | 
 |     uint32_t padding; | 
 |     uint64_t host_addr; | 
 | } RDMARegisterResult; | 
 |  | 
 | static void result_to_network(RDMARegisterResult *result) | 
 | { | 
 |     result->rkey = htonl(result->rkey); | 
 |     result->host_addr = htonll(result->host_addr); | 
 | }; | 
 |  | 
 | static void network_to_result(RDMARegisterResult *result) | 
 | { | 
 |     result->rkey = ntohl(result->rkey); | 
 |     result->host_addr = ntohll(result->host_addr); | 
 | }; | 
 |  | 
 | static int qemu_rdma_exchange_send(RDMAContext *rdma, RDMAControlHeader *head, | 
 |                                    uint8_t *data, RDMAControlHeader *resp, | 
 |                                    int *resp_idx, | 
 |                                    int (*callback)(RDMAContext *rdma, | 
 |                                                    Error **errp), | 
 |                                    Error **errp); | 
 |  | 
 | static inline uint64_t ram_chunk_index(const uint8_t *start, | 
 |                                        const uint8_t *host) | 
 | { | 
 |     return ((uintptr_t) host - (uintptr_t) start) >> RDMA_REG_CHUNK_SHIFT; | 
 | } | 
 |  | 
 | static inline uint8_t *ram_chunk_start(const RDMALocalBlock *rdma_ram_block, | 
 |                                        uint64_t i) | 
 | { | 
 |     return (uint8_t *)(uintptr_t)(rdma_ram_block->local_host_addr + | 
 |                                   (i << RDMA_REG_CHUNK_SHIFT)); | 
 | } | 
 |  | 
 | static inline uint8_t *ram_chunk_end(const RDMALocalBlock *rdma_ram_block, | 
 |                                      uint64_t i) | 
 | { | 
 |     uint8_t *result = ram_chunk_start(rdma_ram_block, i) + | 
 |                                          (1UL << RDMA_REG_CHUNK_SHIFT); | 
 |  | 
 |     if (result > (rdma_ram_block->local_host_addr + rdma_ram_block->length)) { | 
 |         result = rdma_ram_block->local_host_addr + rdma_ram_block->length; | 
 |     } | 
 |  | 
 |     return result; | 
 | } | 
 |  | 
 | static void rdma_add_block(RDMAContext *rdma, const char *block_name, | 
 |                            void *host_addr, | 
 |                            ram_addr_t block_offset, uint64_t length) | 
 | { | 
 |     RDMALocalBlocks *local = &rdma->local_ram_blocks; | 
 |     RDMALocalBlock *block; | 
 |     RDMALocalBlock *old = local->block; | 
 |  | 
 |     local->block = g_new0(RDMALocalBlock, local->nb_blocks + 1); | 
 |  | 
 |     if (local->nb_blocks) { | 
 |         if (rdma->blockmap) { | 
 |             for (int x = 0; x < local->nb_blocks; x++) { | 
 |                 g_hash_table_remove(rdma->blockmap, | 
 |                                     (void *)(uintptr_t)old[x].offset); | 
 |                 g_hash_table_insert(rdma->blockmap, | 
 |                                     (void *)(uintptr_t)old[x].offset, | 
 |                                     &local->block[x]); | 
 |             } | 
 |         } | 
 |         memcpy(local->block, old, sizeof(RDMALocalBlock) * local->nb_blocks); | 
 |         g_free(old); | 
 |     } | 
 |  | 
 |     block = &local->block[local->nb_blocks]; | 
 |  | 
 |     block->block_name = g_strdup(block_name); | 
 |     block->local_host_addr = host_addr; | 
 |     block->offset = block_offset; | 
 |     block->length = length; | 
 |     block->index = local->nb_blocks; | 
 |     block->src_index = ~0U; /* Filled in by the receipt of the block list */ | 
 |     block->nb_chunks = ram_chunk_index(host_addr, host_addr + length) + 1UL; | 
 |     block->transit_bitmap = bitmap_new(block->nb_chunks); | 
 |     bitmap_clear(block->transit_bitmap, 0, block->nb_chunks); | 
 |     block->unregister_bitmap = bitmap_new(block->nb_chunks); | 
 |     bitmap_clear(block->unregister_bitmap, 0, block->nb_chunks); | 
 |     block->remote_keys = g_new0(uint32_t, block->nb_chunks); | 
 |  | 
 |     block->is_ram_block = local->init ? false : true; | 
 |  | 
 |     if (rdma->blockmap) { | 
 |         g_hash_table_insert(rdma->blockmap, (void *)(uintptr_t)block_offset, block); | 
 |     } | 
 |  | 
 |     trace_rdma_add_block(block_name, local->nb_blocks, | 
 |                          (uintptr_t) block->local_host_addr, | 
 |                          block->offset, block->length, | 
 |                          (uintptr_t) (block->local_host_addr + block->length), | 
 |                          BITS_TO_LONGS(block->nb_chunks) * | 
 |                              sizeof(unsigned long) * 8, | 
 |                          block->nb_chunks); | 
 |  | 
 |     local->nb_blocks++; | 
 | } | 
 |  | 
 | /* | 
 |  * Memory regions need to be registered with the device and queue pairs setup | 
 |  * in advanced before the migration starts. This tells us where the RAM blocks | 
 |  * are so that we can register them individually. | 
 |  */ | 
 | static int qemu_rdma_init_one_block(RAMBlock *rb, void *opaque) | 
 | { | 
 |     const char *block_name = qemu_ram_get_idstr(rb); | 
 |     void *host_addr = qemu_ram_get_host_addr(rb); | 
 |     ram_addr_t block_offset = qemu_ram_get_offset(rb); | 
 |     ram_addr_t length = qemu_ram_get_used_length(rb); | 
 |     rdma_add_block(opaque, block_name, host_addr, block_offset, length); | 
 |     return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Identify the RAMBlocks and their quantity. They will be references to | 
 |  * identify chunk boundaries inside each RAMBlock and also be referenced | 
 |  * during dynamic page registration. | 
 |  */ | 
 | static void qemu_rdma_init_ram_blocks(RDMAContext *rdma) | 
 | { | 
 |     RDMALocalBlocks *local = &rdma->local_ram_blocks; | 
 |     int ret; | 
 |  | 
 |     assert(rdma->blockmap == NULL); | 
 |     memset(local, 0, sizeof *local); | 
 |     ret = foreach_not_ignored_block(qemu_rdma_init_one_block, rdma); | 
 |     assert(!ret); | 
 |     trace_qemu_rdma_init_ram_blocks(local->nb_blocks); | 
 |     rdma->dest_blocks = g_new0(RDMADestBlock, | 
 |                                rdma->local_ram_blocks.nb_blocks); | 
 |     local->init = true; | 
 | } | 
 |  | 
 | /* | 
 |  * Note: If used outside of cleanup, the caller must ensure that the destination | 
 |  * block structures are also updated | 
 |  */ | 
 | static void rdma_delete_block(RDMAContext *rdma, RDMALocalBlock *block) | 
 | { | 
 |     RDMALocalBlocks *local = &rdma->local_ram_blocks; | 
 |     RDMALocalBlock *old = local->block; | 
 |  | 
 |     if (rdma->blockmap) { | 
 |         g_hash_table_remove(rdma->blockmap, (void *)(uintptr_t)block->offset); | 
 |     } | 
 |     if (block->pmr) { | 
 |         for (int j = 0; j < block->nb_chunks; j++) { | 
 |             if (!block->pmr[j]) { | 
 |                 continue; | 
 |             } | 
 |             ibv_dereg_mr(block->pmr[j]); | 
 |             rdma->total_registrations--; | 
 |         } | 
 |         g_free(block->pmr); | 
 |         block->pmr = NULL; | 
 |     } | 
 |  | 
 |     if (block->mr) { | 
 |         ibv_dereg_mr(block->mr); | 
 |         rdma->total_registrations--; | 
 |         block->mr = NULL; | 
 |     } | 
 |  | 
 |     g_free(block->transit_bitmap); | 
 |     block->transit_bitmap = NULL; | 
 |  | 
 |     g_free(block->unregister_bitmap); | 
 |     block->unregister_bitmap = NULL; | 
 |  | 
 |     g_free(block->remote_keys); | 
 |     block->remote_keys = NULL; | 
 |  | 
 |     g_free(block->block_name); | 
 |     block->block_name = NULL; | 
 |  | 
 |     if (rdma->blockmap) { | 
 |         for (int x = 0; x < local->nb_blocks; x++) { | 
 |             g_hash_table_remove(rdma->blockmap, | 
 |                                 (void *)(uintptr_t)old[x].offset); | 
 |         } | 
 |     } | 
 |  | 
 |     if (local->nb_blocks > 1) { | 
 |  | 
 |         local->block = g_new0(RDMALocalBlock, local->nb_blocks - 1); | 
 |  | 
 |         if (block->index) { | 
 |             memcpy(local->block, old, sizeof(RDMALocalBlock) * block->index); | 
 |         } | 
 |  | 
 |         if (block->index < (local->nb_blocks - 1)) { | 
 |             memcpy(local->block + block->index, old + (block->index + 1), | 
 |                 sizeof(RDMALocalBlock) * | 
 |                     (local->nb_blocks - (block->index + 1))); | 
 |             for (int x = block->index; x < local->nb_blocks - 1; x++) { | 
 |                 local->block[x].index--; | 
 |             } | 
 |         } | 
 |     } else { | 
 |         assert(block == local->block); | 
 |         local->block = NULL; | 
 |     } | 
 |  | 
 |     trace_rdma_delete_block(block, (uintptr_t)block->local_host_addr, | 
 |                            block->offset, block->length, | 
 |                             (uintptr_t)(block->local_host_addr + block->length), | 
 |                            BITS_TO_LONGS(block->nb_chunks) * | 
 |                                sizeof(unsigned long) * 8, block->nb_chunks); | 
 |  | 
 |     g_free(old); | 
 |  | 
 |     local->nb_blocks--; | 
 |  | 
 |     if (local->nb_blocks && rdma->blockmap) { | 
 |         for (int x = 0; x < local->nb_blocks; x++) { | 
 |             g_hash_table_insert(rdma->blockmap, | 
 |                                 (void *)(uintptr_t)local->block[x].offset, | 
 |                                 &local->block[x]); | 
 |         } | 
 |     } | 
 | } | 
 |  | 
 | /* | 
 |  * Trace RDMA device open, with device details. | 
 |  */ | 
 | static void qemu_rdma_dump_id(const char *who, struct ibv_context *verbs) | 
 | { | 
 |     struct ibv_port_attr port; | 
 |  | 
 |     if (ibv_query_port(verbs, 1, &port)) { | 
 |         trace_qemu_rdma_dump_id_failed(who); | 
 |         return; | 
 |     } | 
 |  | 
 |     trace_qemu_rdma_dump_id(who, | 
 |                 verbs->device->name, | 
 |                 verbs->device->dev_name, | 
 |                 verbs->device->dev_path, | 
 |                 verbs->device->ibdev_path, | 
 |                 port.link_layer, | 
 |                 port.link_layer == IBV_LINK_LAYER_INFINIBAND ? "Infiniband" | 
 |                 : port.link_layer == IBV_LINK_LAYER_ETHERNET ? "Ethernet" | 
 |                 : "Unknown"); | 
 | } | 
 |  | 
 | /* | 
 |  * Trace RDMA gid addressing information. | 
 |  * Useful for understanding the RDMA device hierarchy in the kernel. | 
 |  */ | 
 | static void qemu_rdma_dump_gid(const char *who, struct rdma_cm_id *id) | 
 | { | 
 |     char sgid[33]; | 
 |     char dgid[33]; | 
 |     inet_ntop(AF_INET6, &id->route.addr.addr.ibaddr.sgid, sgid, sizeof sgid); | 
 |     inet_ntop(AF_INET6, &id->route.addr.addr.ibaddr.dgid, dgid, sizeof dgid); | 
 |     trace_qemu_rdma_dump_gid(who, sgid, dgid); | 
 | } | 
 |  | 
 | /* | 
 |  * As of now, IPv6 over RoCE / iWARP is not supported by linux. | 
 |  * We will try the next addrinfo struct, and fail if there are | 
 |  * no other valid addresses to bind against. | 
 |  * | 
 |  * If user is listening on '[::]', then we will not have a opened a device | 
 |  * yet and have no way of verifying if the device is RoCE or not. | 
 |  * | 
 |  * In this case, the source VM will throw an error for ALL types of | 
 |  * connections (both IPv4 and IPv6) if the destination machine does not have | 
 |  * a regular infiniband network available for use. | 
 |  * | 
 |  * The only way to guarantee that an error is thrown for broken kernels is | 
 |  * for the management software to choose a *specific* interface at bind time | 
 |  * and validate what time of hardware it is. | 
 |  * | 
 |  * Unfortunately, this puts the user in a fix: | 
 |  * | 
 |  *  If the source VM connects with an IPv4 address without knowing that the | 
 |  *  destination has bound to '[::]' the migration will unconditionally fail | 
 |  *  unless the management software is explicitly listening on the IPv4 | 
 |  *  address while using a RoCE-based device. | 
 |  * | 
 |  *  If the source VM connects with an IPv6 address, then we're OK because we can | 
 |  *  throw an error on the source (and similarly on the destination). | 
 |  * | 
 |  *  But in mixed environments, this will be broken for a while until it is fixed | 
 |  *  inside linux. | 
 |  * | 
 |  * We do provide a *tiny* bit of help in this function: We can list all of the | 
 |  * devices in the system and check to see if all the devices are RoCE or | 
 |  * Infiniband. | 
 |  * | 
 |  * If we detect that we have a *pure* RoCE environment, then we can safely | 
 |  * thrown an error even if the management software has specified '[::]' as the | 
 |  * bind address. | 
 |  * | 
 |  * However, if there is are multiple hetergeneous devices, then we cannot make | 
 |  * this assumption and the user just has to be sure they know what they are | 
 |  * doing. | 
 |  * | 
 |  * Patches are being reviewed on linux-rdma. | 
 |  */ | 
 | static int qemu_rdma_broken_ipv6_kernel(struct ibv_context *verbs, Error **errp) | 
 | { | 
 |     /* This bug only exists in linux, to our knowledge. */ | 
 | #ifdef CONFIG_LINUX | 
 |     struct ibv_port_attr port_attr; | 
 |  | 
 |     /* | 
 |      * Verbs are only NULL if management has bound to '[::]'. | 
 |      * | 
 |      * Let's iterate through all the devices and see if there any pure IB | 
 |      * devices (non-ethernet). | 
 |      * | 
 |      * If not, then we can safely proceed with the migration. | 
 |      * Otherwise, there are no guarantees until the bug is fixed in linux. | 
 |      */ | 
 |     if (!verbs) { | 
 |         int num_devices; | 
 |         struct ibv_device **dev_list = ibv_get_device_list(&num_devices); | 
 |         bool roce_found = false; | 
 |         bool ib_found = false; | 
 |  | 
 |         for (int x = 0; x < num_devices; x++) { | 
 |             verbs = ibv_open_device(dev_list[x]); | 
 |             /* | 
 |              * ibv_open_device() is not documented to set errno.  If | 
 |              * it does, it's somebody else's doc bug.  If it doesn't, | 
 |              * the use of errno below is wrong. | 
 |              * TODO Find out whether ibv_open_device() sets errno. | 
 |              */ | 
 |             if (!verbs) { | 
 |                 if (errno == EPERM) { | 
 |                     continue; | 
 |                 } else { | 
 |                     error_setg_errno(errp, errno, | 
 |                                      "could not open RDMA device context"); | 
 |                     return -1; | 
 |                 } | 
 |             } | 
 |  | 
 |             if (ibv_query_port(verbs, 1, &port_attr)) { | 
 |                 ibv_close_device(verbs); | 
 |                 error_setg(errp, | 
 |                            "RDMA ERROR: Could not query initial IB port"); | 
 |                 return -1; | 
 |             } | 
 |  | 
 |             if (port_attr.link_layer == IBV_LINK_LAYER_INFINIBAND) { | 
 |                 ib_found = true; | 
 |             } else if (port_attr.link_layer == IBV_LINK_LAYER_ETHERNET) { | 
 |                 roce_found = true; | 
 |             } | 
 |  | 
 |             ibv_close_device(verbs); | 
 |  | 
 |         } | 
 |  | 
 |         if (roce_found) { | 
 |             if (ib_found) { | 
 |                 warn_report("migrations may fail:" | 
 |                             " IPv6 over RoCE / iWARP in linux" | 
 |                             " is broken. But since you appear to have a" | 
 |                             " mixed RoCE / IB environment, be sure to only" | 
 |                             " migrate over the IB fabric until the kernel " | 
 |                             " fixes the bug."); | 
 |             } else { | 
 |                 error_setg(errp, "RDMA ERROR: " | 
 |                            "You only have RoCE / iWARP devices in your systems" | 
 |                            " and your management software has specified '[::]'" | 
 |                            ", but IPv6 over RoCE / iWARP is not supported in Linux."); | 
 |                 return -1; | 
 |             } | 
 |         } | 
 |  | 
 |         return 0; | 
 |     } | 
 |  | 
 |     /* | 
 |      * If we have a verbs context, that means that some other than '[::]' was | 
 |      * used by the management software for binding. In which case we can | 
 |      * actually warn the user about a potentially broken kernel. | 
 |      */ | 
 |  | 
 |     /* IB ports start with 1, not 0 */ | 
 |     if (ibv_query_port(verbs, 1, &port_attr)) { | 
 |         error_setg(errp, "RDMA ERROR: Could not query initial IB port"); | 
 |         return -1; | 
 |     } | 
 |  | 
 |     if (port_attr.link_layer == IBV_LINK_LAYER_ETHERNET) { | 
 |         error_setg(errp, "RDMA ERROR: " | 
 |                    "Linux kernel's RoCE / iWARP does not support IPv6 " | 
 |                    "(but patches on linux-rdma in progress)"); | 
 |         return -1; | 
 |     } | 
 |  | 
 | #endif | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Figure out which RDMA device corresponds to the requested IP hostname | 
 |  * Also create the initial connection manager identifiers for opening | 
 |  * the connection. | 
 |  */ | 
 | static int qemu_rdma_resolve_host(RDMAContext *rdma, Error **errp) | 
 | { | 
 |     Error *err = NULL; | 
 |     int ret; | 
 |     struct rdma_addrinfo *res; | 
 |     char port_str[16]; | 
 |     struct rdma_cm_event *cm_event; | 
 |     char ip[40] = "unknown"; | 
 |  | 
 |     if (rdma->host == NULL || !strcmp(rdma->host, "")) { | 
 |         error_setg(errp, "RDMA ERROR: RDMA hostname has not been set"); | 
 |         return -1; | 
 |     } | 
 |  | 
 |     /* create CM channel */ | 
 |     rdma->channel = rdma_create_event_channel(); | 
 |     if (!rdma->channel) { | 
 |         error_setg(errp, "RDMA ERROR: could not create CM channel"); | 
 |         return -1; | 
 |     } | 
 |  | 
 |     /* create CM id */ | 
 |     ret = rdma_create_id(rdma->channel, &rdma->cm_id, NULL, RDMA_PS_TCP); | 
 |     if (ret < 0) { | 
 |         error_setg(errp, "RDMA ERROR: could not create channel id"); | 
 |         goto err_resolve_create_id; | 
 |     } | 
 |  | 
 |     snprintf(port_str, 16, "%d", rdma->port); | 
 |     port_str[15] = '\0'; | 
 |  | 
 |     ret = rdma_getaddrinfo(rdma->host, port_str, NULL, &res); | 
 |     if (ret) { | 
 |         error_setg(errp, "RDMA ERROR: could not rdma_getaddrinfo address %s", | 
 |                    rdma->host); | 
 |         goto err_resolve_get_addr; | 
 |     } | 
 |  | 
 |     /* Try all addresses, saving the first error in @err */ | 
 |     for (struct rdma_addrinfo *e = res; e != NULL; e = e->ai_next) { | 
 |         Error **local_errp = err ? NULL : &err; | 
 |  | 
 |         inet_ntop(e->ai_family, | 
 |             &((struct sockaddr_in *) e->ai_dst_addr)->sin_addr, ip, sizeof ip); | 
 |         trace_qemu_rdma_resolve_host_trying(rdma->host, ip); | 
 |  | 
 |         ret = rdma_resolve_addr(rdma->cm_id, NULL, e->ai_dst_addr, | 
 |                 RDMA_RESOLVE_TIMEOUT_MS); | 
 |         if (ret >= 0) { | 
 |             if (e->ai_family == AF_INET6) { | 
 |                 ret = qemu_rdma_broken_ipv6_kernel(rdma->cm_id->verbs, | 
 |                                                    local_errp); | 
 |                 if (ret < 0) { | 
 |                     continue; | 
 |                 } | 
 |             } | 
 |             error_free(err); | 
 |             goto route; | 
 |         } | 
 |     } | 
 |  | 
 |     rdma_freeaddrinfo(res); | 
 |     if (err) { | 
 |         error_propagate(errp, err); | 
 |     } else { | 
 |         error_setg(errp, "RDMA ERROR: could not resolve address %s", | 
 |                    rdma->host); | 
 |     } | 
 |     goto err_resolve_get_addr; | 
 |  | 
 | route: | 
 |     rdma_freeaddrinfo(res); | 
 |     qemu_rdma_dump_gid("source_resolve_addr", rdma->cm_id); | 
 |  | 
 |     ret = rdma_get_cm_event(rdma->channel, &cm_event); | 
 |     if (ret < 0) { | 
 |         error_setg(errp, "RDMA ERROR: could not perform event_addr_resolved"); | 
 |         goto err_resolve_get_addr; | 
 |     } | 
 |  | 
 |     if (cm_event->event != RDMA_CM_EVENT_ADDR_RESOLVED) { | 
 |         error_setg(errp, | 
 |                    "RDMA ERROR: result not equal to event_addr_resolved %s", | 
 |                    rdma_event_str(cm_event->event)); | 
 |         rdma_ack_cm_event(cm_event); | 
 |         goto err_resolve_get_addr; | 
 |     } | 
 |     rdma_ack_cm_event(cm_event); | 
 |  | 
 |     /* resolve route */ | 
 |     ret = rdma_resolve_route(rdma->cm_id, RDMA_RESOLVE_TIMEOUT_MS); | 
 |     if (ret < 0) { | 
 |         error_setg(errp, "RDMA ERROR: could not resolve rdma route"); | 
 |         goto err_resolve_get_addr; | 
 |     } | 
 |  | 
 |     ret = rdma_get_cm_event(rdma->channel, &cm_event); | 
 |     if (ret < 0) { | 
 |         error_setg(errp, "RDMA ERROR: could not perform event_route_resolved"); | 
 |         goto err_resolve_get_addr; | 
 |     } | 
 |     if (cm_event->event != RDMA_CM_EVENT_ROUTE_RESOLVED) { | 
 |         error_setg(errp, "RDMA ERROR: " | 
 |                    "result not equal to event_route_resolved: %s", | 
 |                    rdma_event_str(cm_event->event)); | 
 |         rdma_ack_cm_event(cm_event); | 
 |         goto err_resolve_get_addr; | 
 |     } | 
 |     rdma_ack_cm_event(cm_event); | 
 |     rdma->verbs = rdma->cm_id->verbs; | 
 |     qemu_rdma_dump_id("source_resolve_host", rdma->cm_id->verbs); | 
 |     qemu_rdma_dump_gid("source_resolve_host", rdma->cm_id); | 
 |     return 0; | 
 |  | 
 | err_resolve_get_addr: | 
 |     rdma_destroy_id(rdma->cm_id); | 
 |     rdma->cm_id = NULL; | 
 | err_resolve_create_id: | 
 |     rdma_destroy_event_channel(rdma->channel); | 
 |     rdma->channel = NULL; | 
 |     return -1; | 
 | } | 
 |  | 
 | /* | 
 |  * Create protection domain and completion queues | 
 |  */ | 
 | static int qemu_rdma_alloc_pd_cq(RDMAContext *rdma, Error **errp) | 
 | { | 
 |     /* allocate pd */ | 
 |     rdma->pd = ibv_alloc_pd(rdma->verbs); | 
 |     if (!rdma->pd) { | 
 |         error_setg(errp, "failed to allocate protection domain"); | 
 |         return -1; | 
 |     } | 
 |  | 
 |     /* create receive completion channel */ | 
 |     rdma->recv_comp_channel = ibv_create_comp_channel(rdma->verbs); | 
 |     if (!rdma->recv_comp_channel) { | 
 |         error_setg(errp, "failed to allocate receive completion channel"); | 
 |         goto err_alloc_pd_cq; | 
 |     } | 
 |  | 
 |     /* | 
 |      * Completion queue can be filled by read work requests. | 
 |      */ | 
 |     rdma->recv_cq = ibv_create_cq(rdma->verbs, (RDMA_SIGNALED_SEND_MAX * 3), | 
 |                                   NULL, rdma->recv_comp_channel, 0); | 
 |     if (!rdma->recv_cq) { | 
 |         error_setg(errp, "failed to allocate receive completion queue"); | 
 |         goto err_alloc_pd_cq; | 
 |     } | 
 |  | 
 |     /* create send completion channel */ | 
 |     rdma->send_comp_channel = ibv_create_comp_channel(rdma->verbs); | 
 |     if (!rdma->send_comp_channel) { | 
 |         error_setg(errp, "failed to allocate send completion channel"); | 
 |         goto err_alloc_pd_cq; | 
 |     } | 
 |  | 
 |     rdma->send_cq = ibv_create_cq(rdma->verbs, (RDMA_SIGNALED_SEND_MAX * 3), | 
 |                                   NULL, rdma->send_comp_channel, 0); | 
 |     if (!rdma->send_cq) { | 
 |         error_setg(errp, "failed to allocate send completion queue"); | 
 |         goto err_alloc_pd_cq; | 
 |     } | 
 |  | 
 |     return 0; | 
 |  | 
 | err_alloc_pd_cq: | 
 |     if (rdma->pd) { | 
 |         ibv_dealloc_pd(rdma->pd); | 
 |     } | 
 |     if (rdma->recv_comp_channel) { | 
 |         ibv_destroy_comp_channel(rdma->recv_comp_channel); | 
 |     } | 
 |     if (rdma->send_comp_channel) { | 
 |         ibv_destroy_comp_channel(rdma->send_comp_channel); | 
 |     } | 
 |     if (rdma->recv_cq) { | 
 |         ibv_destroy_cq(rdma->recv_cq); | 
 |         rdma->recv_cq = NULL; | 
 |     } | 
 |     rdma->pd = NULL; | 
 |     rdma->recv_comp_channel = NULL; | 
 |     rdma->send_comp_channel = NULL; | 
 |     return -1; | 
 |  | 
 | } | 
 |  | 
 | /* | 
 |  * Create queue pairs. | 
 |  */ | 
 | static int qemu_rdma_alloc_qp(RDMAContext *rdma) | 
 | { | 
 |     struct ibv_qp_init_attr attr = { 0 }; | 
 |  | 
 |     attr.cap.max_send_wr = RDMA_SIGNALED_SEND_MAX; | 
 |     attr.cap.max_recv_wr = 3; | 
 |     attr.cap.max_send_sge = 1; | 
 |     attr.cap.max_recv_sge = 1; | 
 |     attr.send_cq = rdma->send_cq; | 
 |     attr.recv_cq = rdma->recv_cq; | 
 |     attr.qp_type = IBV_QPT_RC; | 
 |  | 
 |     if (rdma_create_qp(rdma->cm_id, rdma->pd, &attr) < 0) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     rdma->qp = rdma->cm_id->qp; | 
 |     return 0; | 
 | } | 
 |  | 
 | /* Check whether On-Demand Paging is supported by RDAM device */ | 
 | static bool rdma_support_odp(struct ibv_context *dev) | 
 | { | 
 |     struct ibv_device_attr_ex attr = {0}; | 
 |  | 
 |     if (ibv_query_device_ex(dev, NULL, &attr)) { | 
 |         return false; | 
 |     } | 
 |  | 
 |     if (attr.odp_caps.general_caps & IBV_ODP_SUPPORT) { | 
 |         return true; | 
 |     } | 
 |  | 
 |     return false; | 
 | } | 
 |  | 
 | /* | 
 |  * ibv_advise_mr to avoid RNR NAK error as far as possible. | 
 |  * The responder mr registering with ODP will sent RNR NAK back to | 
 |  * the requester in the face of the page fault. | 
 |  */ | 
 | static void qemu_rdma_advise_prefetch_mr(struct ibv_pd *pd, uint64_t addr, | 
 |                                          uint32_t len,  uint32_t lkey, | 
 |                                          const char *name, bool wr) | 
 | { | 
 | #ifdef HAVE_IBV_ADVISE_MR | 
 |     int ret; | 
 |     int advice = wr ? IBV_ADVISE_MR_ADVICE_PREFETCH_WRITE : | 
 |                  IBV_ADVISE_MR_ADVICE_PREFETCH; | 
 |     struct ibv_sge sg_list = {.lkey = lkey, .addr = addr, .length = len}; | 
 |  | 
 |     ret = ibv_advise_mr(pd, advice, | 
 |                         IBV_ADVISE_MR_FLAG_FLUSH, &sg_list, 1); | 
 |     /* ignore the error */ | 
 |     trace_qemu_rdma_advise_mr(name, len, addr, strerror(ret)); | 
 | #endif | 
 | } | 
 |  | 
 | static int qemu_rdma_reg_whole_ram_blocks(RDMAContext *rdma, Error **errp) | 
 | { | 
 |     int i; | 
 |     RDMALocalBlocks *local = &rdma->local_ram_blocks; | 
 |  | 
 |     for (i = 0; i < local->nb_blocks; i++) { | 
 |         int access = IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE; | 
 |  | 
 |         local->block[i].mr = | 
 |             ibv_reg_mr(rdma->pd, | 
 |                     local->block[i].local_host_addr, | 
 |                     local->block[i].length, access | 
 |                     ); | 
 |         /* | 
 |          * ibv_reg_mr() is not documented to set errno.  If it does, | 
 |          * it's somebody else's doc bug.  If it doesn't, the use of | 
 |          * errno below is wrong. | 
 |          * TODO Find out whether ibv_reg_mr() sets errno. | 
 |          */ | 
 |         if (!local->block[i].mr && | 
 |             errno == ENOTSUP && rdma_support_odp(rdma->verbs)) { | 
 |                 access |= IBV_ACCESS_ON_DEMAND; | 
 |                 /* register ODP mr */ | 
 |                 local->block[i].mr = | 
 |                     ibv_reg_mr(rdma->pd, | 
 |                                local->block[i].local_host_addr, | 
 |                                local->block[i].length, access); | 
 |                 trace_qemu_rdma_register_odp_mr(local->block[i].block_name); | 
 |  | 
 |                 if (local->block[i].mr) { | 
 |                     qemu_rdma_advise_prefetch_mr(rdma->pd, | 
 |                                     (uintptr_t)local->block[i].local_host_addr, | 
 |                                     local->block[i].length, | 
 |                                     local->block[i].mr->lkey, | 
 |                                     local->block[i].block_name, | 
 |                                     true); | 
 |                 } | 
 |         } | 
 |  | 
 |         if (!local->block[i].mr) { | 
 |             error_setg_errno(errp, errno, | 
 |                              "Failed to register local dest ram block!"); | 
 |             goto err; | 
 |         } | 
 |         rdma->total_registrations++; | 
 |     } | 
 |  | 
 |     return 0; | 
 |  | 
 | err: | 
 |     for (i--; i >= 0; i--) { | 
 |         ibv_dereg_mr(local->block[i].mr); | 
 |         local->block[i].mr = NULL; | 
 |         rdma->total_registrations--; | 
 |     } | 
 |  | 
 |     return -1; | 
 |  | 
 | } | 
 |  | 
 | /* | 
 |  * Find the ram block that corresponds to the page requested to be | 
 |  * transmitted by QEMU. | 
 |  * | 
 |  * Once the block is found, also identify which 'chunk' within that | 
 |  * block that the page belongs to. | 
 |  */ | 
 | static void qemu_rdma_search_ram_block(RDMAContext *rdma, | 
 |                                        uintptr_t block_offset, | 
 |                                        uint64_t offset, | 
 |                                        uint64_t length, | 
 |                                        uint64_t *block_index, | 
 |                                        uint64_t *chunk_index) | 
 | { | 
 |     uint64_t current_addr = block_offset + offset; | 
 |     RDMALocalBlock *block = g_hash_table_lookup(rdma->blockmap, | 
 |                                                 (void *) block_offset); | 
 |     assert(block); | 
 |     assert(current_addr >= block->offset); | 
 |     assert((current_addr + length) <= (block->offset + block->length)); | 
 |  | 
 |     *block_index = block->index; | 
 |     *chunk_index = ram_chunk_index(block->local_host_addr, | 
 |                 block->local_host_addr + (current_addr - block->offset)); | 
 | } | 
 |  | 
 | /* | 
 |  * Register a chunk with IB. If the chunk was already registered | 
 |  * previously, then skip. | 
 |  * | 
 |  * Also return the keys associated with the registration needed | 
 |  * to perform the actual RDMA operation. | 
 |  */ | 
 | static int qemu_rdma_register_and_get_keys(RDMAContext *rdma, | 
 |         RDMALocalBlock *block, uintptr_t host_addr, | 
 |         uint32_t *lkey, uint32_t *rkey, int chunk, | 
 |         uint8_t *chunk_start, uint8_t *chunk_end) | 
 | { | 
 |     if (block->mr) { | 
 |         if (lkey) { | 
 |             *lkey = block->mr->lkey; | 
 |         } | 
 |         if (rkey) { | 
 |             *rkey = block->mr->rkey; | 
 |         } | 
 |         return 0; | 
 |     } | 
 |  | 
 |     /* allocate memory to store chunk MRs */ | 
 |     if (!block->pmr) { | 
 |         block->pmr = g_new0(struct ibv_mr *, block->nb_chunks); | 
 |     } | 
 |  | 
 |     /* | 
 |      * If 'rkey', then we're the destination, so grant access to the source. | 
 |      * | 
 |      * If 'lkey', then we're the source VM, so grant access only to ourselves. | 
 |      */ | 
 |     if (!block->pmr[chunk]) { | 
 |         uint64_t len = chunk_end - chunk_start; | 
 |         int access = rkey ? IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE : | 
 |                      0; | 
 |  | 
 |         trace_qemu_rdma_register_and_get_keys(len, chunk_start); | 
 |  | 
 |         block->pmr[chunk] = ibv_reg_mr(rdma->pd, chunk_start, len, access); | 
 |         /* | 
 |          * ibv_reg_mr() is not documented to set errno.  If it does, | 
 |          * it's somebody else's doc bug.  If it doesn't, the use of | 
 |          * errno below is wrong. | 
 |          * TODO Find out whether ibv_reg_mr() sets errno. | 
 |          */ | 
 |         if (!block->pmr[chunk] && | 
 |             errno == ENOTSUP && rdma_support_odp(rdma->verbs)) { | 
 |             access |= IBV_ACCESS_ON_DEMAND; | 
 |             /* register ODP mr */ | 
 |             block->pmr[chunk] = ibv_reg_mr(rdma->pd, chunk_start, len, access); | 
 |             trace_qemu_rdma_register_odp_mr(block->block_name); | 
 |  | 
 |             if (block->pmr[chunk]) { | 
 |                 qemu_rdma_advise_prefetch_mr(rdma->pd, (uintptr_t)chunk_start, | 
 |                                             len, block->pmr[chunk]->lkey, | 
 |                                             block->block_name, rkey); | 
 |  | 
 |             } | 
 |         } | 
 |     } | 
 |     if (!block->pmr[chunk]) { | 
 |         return -1; | 
 |     } | 
 |     rdma->total_registrations++; | 
 |  | 
 |     if (lkey) { | 
 |         *lkey = block->pmr[chunk]->lkey; | 
 |     } | 
 |     if (rkey) { | 
 |         *rkey = block->pmr[chunk]->rkey; | 
 |     } | 
 |     return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Register (at connection time) the memory used for control | 
 |  * channel messages. | 
 |  */ | 
 | static int qemu_rdma_reg_control(RDMAContext *rdma, int idx) | 
 | { | 
 |     rdma->wr_data[idx].control_mr = ibv_reg_mr(rdma->pd, | 
 |             rdma->wr_data[idx].control, RDMA_CONTROL_MAX_BUFFER, | 
 |             IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE); | 
 |     if (rdma->wr_data[idx].control_mr) { | 
 |         rdma->total_registrations++; | 
 |         return 0; | 
 |     } | 
 |     return -1; | 
 | } | 
 |  | 
 | /* | 
 |  * Perform a non-optimized memory unregistration after every transfer | 
 |  * for demonstration purposes, only if pin-all is not requested. | 
 |  * | 
 |  * Potential optimizations: | 
 |  * 1. Start a new thread to run this function continuously | 
 |         - for bit clearing | 
 |         - and for receipt of unregister messages | 
 |  * 2. Use an LRU. | 
 |  * 3. Use workload hints. | 
 |  */ | 
 | static int qemu_rdma_unregister_waiting(RDMAContext *rdma) | 
 | { | 
 |     Error *err = NULL; | 
 |  | 
 |     while (rdma->unregistrations[rdma->unregister_current]) { | 
 |         int ret; | 
 |         uint64_t wr_id = rdma->unregistrations[rdma->unregister_current]; | 
 |         uint64_t chunk = | 
 |             (wr_id & RDMA_WRID_CHUNK_MASK) >> RDMA_WRID_CHUNK_SHIFT; | 
 |         uint64_t index = | 
 |             (wr_id & RDMA_WRID_BLOCK_MASK) >> RDMA_WRID_BLOCK_SHIFT; | 
 |         RDMALocalBlock *block = | 
 |             &(rdma->local_ram_blocks.block[index]); | 
 |         RDMARegister reg = { .current_index = index }; | 
 |         RDMAControlHeader resp = { .type = RDMA_CONTROL_UNREGISTER_FINISHED, | 
 |                                  }; | 
 |         RDMAControlHeader head = { .len = sizeof(RDMARegister), | 
 |                                    .type = RDMA_CONTROL_UNREGISTER_REQUEST, | 
 |                                    .repeat = 1, | 
 |                                  }; | 
 |  | 
 |         trace_qemu_rdma_unregister_waiting_proc(chunk, | 
 |                                                 rdma->unregister_current); | 
 |  | 
 |         rdma->unregistrations[rdma->unregister_current] = 0; | 
 |         rdma->unregister_current++; | 
 |  | 
 |         if (rdma->unregister_current == RDMA_SIGNALED_SEND_MAX) { | 
 |             rdma->unregister_current = 0; | 
 |         } | 
 |  | 
 |  | 
 |         /* | 
 |          * Unregistration is speculative (because migration is single-threaded | 
 |          * and we cannot break the protocol's inifinband message ordering). | 
 |          * Thus, if the memory is currently being used for transmission, | 
 |          * then abort the attempt to unregister and try again | 
 |          * later the next time a completion is received for this memory. | 
 |          */ | 
 |         clear_bit(chunk, block->unregister_bitmap); | 
 |  | 
 |         if (test_bit(chunk, block->transit_bitmap)) { | 
 |             trace_qemu_rdma_unregister_waiting_inflight(chunk); | 
 |             continue; | 
 |         } | 
 |  | 
 |         trace_qemu_rdma_unregister_waiting_send(chunk); | 
 |  | 
 |         ret = ibv_dereg_mr(block->pmr[chunk]); | 
 |         block->pmr[chunk] = NULL; | 
 |         block->remote_keys[chunk] = 0; | 
 |  | 
 |         if (ret != 0) { | 
 |             error_report("unregistration chunk failed: %s", | 
 |                          strerror(ret)); | 
 |             return -1; | 
 |         } | 
 |         rdma->total_registrations--; | 
 |  | 
 |         reg.key.chunk = chunk; | 
 |         register_to_network(rdma, ®); | 
 |         ret = qemu_rdma_exchange_send(rdma, &head, (uint8_t *) ®, | 
 |                                       &resp, NULL, NULL, &err); | 
 |         if (ret < 0) { | 
 |             error_report_err(err); | 
 |             return -1; | 
 |         } | 
 |  | 
 |         trace_qemu_rdma_unregister_waiting_complete(chunk); | 
 |     } | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | static uint64_t qemu_rdma_make_wrid(uint64_t wr_id, uint64_t index, | 
 |                                          uint64_t chunk) | 
 | { | 
 |     uint64_t result = wr_id & RDMA_WRID_TYPE_MASK; | 
 |  | 
 |     result |= (index << RDMA_WRID_BLOCK_SHIFT); | 
 |     result |= (chunk << RDMA_WRID_CHUNK_SHIFT); | 
 |  | 
 |     return result; | 
 | } | 
 |  | 
 | /* | 
 |  * Consult the connection manager to see a work request | 
 |  * (of any kind) has completed. | 
 |  * Return the work request ID that completed. | 
 |  */ | 
 | static int qemu_rdma_poll(RDMAContext *rdma, struct ibv_cq *cq, | 
 |                           uint64_t *wr_id_out, uint32_t *byte_len) | 
 | { | 
 |     int ret; | 
 |     struct ibv_wc wc; | 
 |     uint64_t wr_id; | 
 |  | 
 |     ret = ibv_poll_cq(cq, 1, &wc); | 
 |  | 
 |     if (!ret) { | 
 |         *wr_id_out = RDMA_WRID_NONE; | 
 |         return 0; | 
 |     } | 
 |  | 
 |     if (ret < 0) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     wr_id = wc.wr_id & RDMA_WRID_TYPE_MASK; | 
 |  | 
 |     if (wc.status != IBV_WC_SUCCESS) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     if (rdma->control_ready_expected && | 
 |         (wr_id >= RDMA_WRID_RECV_CONTROL)) { | 
 |         trace_qemu_rdma_poll_recv(wr_id - RDMA_WRID_RECV_CONTROL, wr_id, | 
 |                                   rdma->nb_sent); | 
 |         rdma->control_ready_expected = 0; | 
 |     } | 
 |  | 
 |     if (wr_id == RDMA_WRID_RDMA_WRITE) { | 
 |         uint64_t chunk = | 
 |             (wc.wr_id & RDMA_WRID_CHUNK_MASK) >> RDMA_WRID_CHUNK_SHIFT; | 
 |         uint64_t index = | 
 |             (wc.wr_id & RDMA_WRID_BLOCK_MASK) >> RDMA_WRID_BLOCK_SHIFT; | 
 |         RDMALocalBlock *block = &(rdma->local_ram_blocks.block[index]); | 
 |  | 
 |         trace_qemu_rdma_poll_write(wr_id, rdma->nb_sent, | 
 |                                    index, chunk, block->local_host_addr, | 
 |                                    (void *)(uintptr_t)block->remote_host_addr); | 
 |  | 
 |         clear_bit(chunk, block->transit_bitmap); | 
 |  | 
 |         if (rdma->nb_sent > 0) { | 
 |             rdma->nb_sent--; | 
 |         } | 
 |     } else { | 
 |         trace_qemu_rdma_poll_other(wr_id, rdma->nb_sent); | 
 |     } | 
 |  | 
 |     *wr_id_out = wc.wr_id; | 
 |     if (byte_len) { | 
 |         *byte_len = wc.byte_len; | 
 |     } | 
 |  | 
 |     return  0; | 
 | } | 
 |  | 
 | /* Wait for activity on the completion channel. | 
 |  * Returns 0 on success, none-0 on error. | 
 |  */ | 
 | static int qemu_rdma_wait_comp_channel(RDMAContext *rdma, | 
 |                                        struct ibv_comp_channel *comp_channel) | 
 | { | 
 |     struct rdma_cm_event *cm_event; | 
 |  | 
 |     /* | 
 |      * Coroutine doesn't start until migration_fd_process_incoming() | 
 |      * so don't yield unless we know we're running inside of a coroutine. | 
 |      */ | 
 |     if (rdma->migration_started_on_destination && | 
 |         migration_incoming_get_current()->state == MIGRATION_STATUS_ACTIVE) { | 
 |         yield_until_fd_readable(comp_channel->fd); | 
 |     } else { | 
 |         /* This is the source side, we're in a separate thread | 
 |          * or destination prior to migration_fd_process_incoming() | 
 |          * after postcopy, the destination also in a separate thread. | 
 |          * we can't yield; so we have to poll the fd. | 
 |          * But we need to be able to handle 'cancel' or an error | 
 |          * without hanging forever. | 
 |          */ | 
 |         while (!rdma->errored && !rdma->received_error) { | 
 |             GPollFD pfds[2]; | 
 |             pfds[0].fd = comp_channel->fd; | 
 |             pfds[0].events = G_IO_IN | G_IO_HUP | G_IO_ERR; | 
 |             pfds[0].revents = 0; | 
 |  | 
 |             pfds[1].fd = rdma->channel->fd; | 
 |             pfds[1].events = G_IO_IN | G_IO_HUP | G_IO_ERR; | 
 |             pfds[1].revents = 0; | 
 |  | 
 |             /* 0.1s timeout, should be fine for a 'cancel' */ | 
 |             switch (qemu_poll_ns(pfds, 2, 100 * 1000 * 1000)) { | 
 |             case 2: | 
 |             case 1: /* fd active */ | 
 |                 if (pfds[0].revents) { | 
 |                     return 0; | 
 |                 } | 
 |  | 
 |                 if (pfds[1].revents) { | 
 |                     if (rdma_get_cm_event(rdma->channel, &cm_event) < 0) { | 
 |                         return -1; | 
 |                     } | 
 |  | 
 |                     if (cm_event->event == RDMA_CM_EVENT_DISCONNECTED || | 
 |                         cm_event->event == RDMA_CM_EVENT_DEVICE_REMOVAL) { | 
 |                         rdma_ack_cm_event(cm_event); | 
 |                         return -1; | 
 |                     } | 
 |                     rdma_ack_cm_event(cm_event); | 
 |                 } | 
 |                 break; | 
 |  | 
 |             case 0: /* Timeout, go around again */ | 
 |                 break; | 
 |  | 
 |             default: /* Error of some type - | 
 |                       * I don't trust errno from qemu_poll_ns | 
 |                      */ | 
 |                 return -1; | 
 |             } | 
 |  | 
 |             if (migrate_get_current()->state == MIGRATION_STATUS_CANCELLING) { | 
 |                 /* Bail out and let the cancellation happen */ | 
 |                 return -1; | 
 |             } | 
 |         } | 
 |     } | 
 |  | 
 |     if (rdma->received_error) { | 
 |         return -1; | 
 |     } | 
 |     return -rdma->errored; | 
 | } | 
 |  | 
 | static struct ibv_comp_channel *to_channel(RDMAContext *rdma, uint64_t wrid) | 
 | { | 
 |     return wrid < RDMA_WRID_RECV_CONTROL ? rdma->send_comp_channel : | 
 |            rdma->recv_comp_channel; | 
 | } | 
 |  | 
 | static struct ibv_cq *to_cq(RDMAContext *rdma, uint64_t wrid) | 
 | { | 
 |     return wrid < RDMA_WRID_RECV_CONTROL ? rdma->send_cq : rdma->recv_cq; | 
 | } | 
 |  | 
 | /* | 
 |  * Block until the next work request has completed. | 
 |  * | 
 |  * First poll to see if a work request has already completed, | 
 |  * otherwise block. | 
 |  * | 
 |  * If we encounter completed work requests for IDs other than | 
 |  * the one we're interested in, then that's generally an error. | 
 |  * | 
 |  * The only exception is actual RDMA Write completions. These | 
 |  * completions only need to be recorded, but do not actually | 
 |  * need further processing. | 
 |  */ | 
 | static int qemu_rdma_block_for_wrid(RDMAContext *rdma, | 
 |                                     uint64_t wrid_requested, | 
 |                                     uint32_t *byte_len) | 
 | { | 
 |     int num_cq_events = 0, ret; | 
 |     struct ibv_cq *cq; | 
 |     void *cq_ctx; | 
 |     uint64_t wr_id = RDMA_WRID_NONE, wr_id_in; | 
 |     struct ibv_comp_channel *ch = to_channel(rdma, wrid_requested); | 
 |     struct ibv_cq *poll_cq = to_cq(rdma, wrid_requested); | 
 |  | 
 |     if (ibv_req_notify_cq(poll_cq, 0)) { | 
 |         return -1; | 
 |     } | 
 |     /* poll cq first */ | 
 |     while (wr_id != wrid_requested) { | 
 |         ret = qemu_rdma_poll(rdma, poll_cq, &wr_id_in, byte_len); | 
 |         if (ret < 0) { | 
 |             return -1; | 
 |         } | 
 |  | 
 |         wr_id = wr_id_in & RDMA_WRID_TYPE_MASK; | 
 |  | 
 |         if (wr_id == RDMA_WRID_NONE) { | 
 |             break; | 
 |         } | 
 |         if (wr_id != wrid_requested) { | 
 |             trace_qemu_rdma_block_for_wrid_miss(wrid_requested, wr_id); | 
 |         } | 
 |     } | 
 |  | 
 |     if (wr_id == wrid_requested) { | 
 |         return 0; | 
 |     } | 
 |  | 
 |     while (1) { | 
 |         ret = qemu_rdma_wait_comp_channel(rdma, ch); | 
 |         if (ret < 0) { | 
 |             goto err_block_for_wrid; | 
 |         } | 
 |  | 
 |         ret = ibv_get_cq_event(ch, &cq, &cq_ctx); | 
 |         if (ret < 0) { | 
 |             goto err_block_for_wrid; | 
 |         } | 
 |  | 
 |         num_cq_events++; | 
 |  | 
 |         if (ibv_req_notify_cq(cq, 0)) { | 
 |             goto err_block_for_wrid; | 
 |         } | 
 |  | 
 |         while (wr_id != wrid_requested) { | 
 |             ret = qemu_rdma_poll(rdma, poll_cq, &wr_id_in, byte_len); | 
 |             if (ret < 0) { | 
 |                 goto err_block_for_wrid; | 
 |             } | 
 |  | 
 |             wr_id = wr_id_in & RDMA_WRID_TYPE_MASK; | 
 |  | 
 |             if (wr_id == RDMA_WRID_NONE) { | 
 |                 break; | 
 |             } | 
 |             if (wr_id != wrid_requested) { | 
 |                 trace_qemu_rdma_block_for_wrid_miss(wrid_requested, wr_id); | 
 |             } | 
 |         } | 
 |  | 
 |         if (wr_id == wrid_requested) { | 
 |             goto success_block_for_wrid; | 
 |         } | 
 |     } | 
 |  | 
 | success_block_for_wrid: | 
 |     if (num_cq_events) { | 
 |         ibv_ack_cq_events(cq, num_cq_events); | 
 |     } | 
 |     return 0; | 
 |  | 
 | err_block_for_wrid: | 
 |     if (num_cq_events) { | 
 |         ibv_ack_cq_events(cq, num_cq_events); | 
 |     } | 
 |  | 
 |     rdma->errored = true; | 
 |     return -1; | 
 | } | 
 |  | 
 | /* | 
 |  * Post a SEND message work request for the control channel | 
 |  * containing some data and block until the post completes. | 
 |  */ | 
 | static int qemu_rdma_post_send_control(RDMAContext *rdma, uint8_t *buf, | 
 |                                        RDMAControlHeader *head, | 
 |                                        Error **errp) | 
 | { | 
 |     int ret; | 
 |     RDMAWorkRequestData *wr = &rdma->wr_data[RDMA_WRID_CONTROL]; | 
 |     struct ibv_send_wr *bad_wr; | 
 |     struct ibv_sge sge = { | 
 |                            .addr = (uintptr_t)(wr->control), | 
 |                            .length = head->len + sizeof(RDMAControlHeader), | 
 |                            .lkey = wr->control_mr->lkey, | 
 |                          }; | 
 |     struct ibv_send_wr send_wr = { | 
 |                                    .wr_id = RDMA_WRID_SEND_CONTROL, | 
 |                                    .opcode = IBV_WR_SEND, | 
 |                                    .send_flags = IBV_SEND_SIGNALED, | 
 |                                    .sg_list = &sge, | 
 |                                    .num_sge = 1, | 
 |                                 }; | 
 |  | 
 |     trace_qemu_rdma_post_send_control(control_desc(head->type)); | 
 |  | 
 |     /* | 
 |      * We don't actually need to do a memcpy() in here if we used | 
 |      * the "sge" properly, but since we're only sending control messages | 
 |      * (not RAM in a performance-critical path), then its OK for now. | 
 |      * | 
 |      * The copy makes the RDMAControlHeader simpler to manipulate | 
 |      * for the time being. | 
 |      */ | 
 |     assert(head->len <= RDMA_CONTROL_MAX_BUFFER - sizeof(*head)); | 
 |     memcpy(wr->control, head, sizeof(RDMAControlHeader)); | 
 |     control_to_network((void *) wr->control); | 
 |  | 
 |     if (buf) { | 
 |         memcpy(wr->control + sizeof(RDMAControlHeader), buf, head->len); | 
 |     } | 
 |  | 
 |  | 
 |     ret = ibv_post_send(rdma->qp, &send_wr, &bad_wr); | 
 |  | 
 |     if (ret > 0) { | 
 |         error_setg(errp, "Failed to use post IB SEND for control"); | 
 |         return -1; | 
 |     } | 
 |  | 
 |     ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_SEND_CONTROL, NULL); | 
 |     if (ret < 0) { | 
 |         error_setg(errp, "rdma migration: send polling control error"); | 
 |         return -1; | 
 |     } | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Post a RECV work request in anticipation of some future receipt | 
 |  * of data on the control channel. | 
 |  */ | 
 | static int qemu_rdma_post_recv_control(RDMAContext *rdma, int idx, | 
 |                                        Error **errp) | 
 | { | 
 |     struct ibv_recv_wr *bad_wr; | 
 |     struct ibv_sge sge = { | 
 |                             .addr = (uintptr_t)(rdma->wr_data[idx].control), | 
 |                             .length = RDMA_CONTROL_MAX_BUFFER, | 
 |                             .lkey = rdma->wr_data[idx].control_mr->lkey, | 
 |                          }; | 
 |  | 
 |     struct ibv_recv_wr recv_wr = { | 
 |                                     .wr_id = RDMA_WRID_RECV_CONTROL + idx, | 
 |                                     .sg_list = &sge, | 
 |                                     .num_sge = 1, | 
 |                                  }; | 
 |  | 
 |  | 
 |     if (ibv_post_recv(rdma->qp, &recv_wr, &bad_wr)) { | 
 |         error_setg(errp, "error posting control recv"); | 
 |         return -1; | 
 |     } | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Block and wait for a RECV control channel message to arrive. | 
 |  */ | 
 | static int qemu_rdma_exchange_get_response(RDMAContext *rdma, | 
 |                 RDMAControlHeader *head, uint32_t expecting, int idx, | 
 |                 Error **errp) | 
 | { | 
 |     uint32_t byte_len; | 
 |     int ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RECV_CONTROL + idx, | 
 |                                        &byte_len); | 
 |  | 
 |     if (ret < 0) { | 
 |         error_setg(errp, "rdma migration: recv polling control error!"); | 
 |         return -1; | 
 |     } | 
 |  | 
 |     network_to_control((void *) rdma->wr_data[idx].control); | 
 |     memcpy(head, rdma->wr_data[idx].control, sizeof(RDMAControlHeader)); | 
 |  | 
 |     trace_qemu_rdma_exchange_get_response_start(control_desc(expecting)); | 
 |  | 
 |     if (expecting == RDMA_CONTROL_NONE) { | 
 |         trace_qemu_rdma_exchange_get_response_none(control_desc(head->type), | 
 |                                              head->type); | 
 |     } else if (head->type != expecting || head->type == RDMA_CONTROL_ERROR) { | 
 |         error_setg(errp, "Was expecting a %s (%d) control message" | 
 |                 ", but got: %s (%d), length: %d", | 
 |                 control_desc(expecting), expecting, | 
 |                 control_desc(head->type), head->type, head->len); | 
 |         if (head->type == RDMA_CONTROL_ERROR) { | 
 |             rdma->received_error = true; | 
 |         } | 
 |         return -1; | 
 |     } | 
 |     if (head->len > RDMA_CONTROL_MAX_BUFFER - sizeof(*head)) { | 
 |         error_setg(errp, "too long length: %d", head->len); | 
 |         return -1; | 
 |     } | 
 |     if (sizeof(*head) + head->len != byte_len) { | 
 |         error_setg(errp, "Malformed length: %d byte_len %d", | 
 |                    head->len, byte_len); | 
 |         return -1; | 
 |     } | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * When a RECV work request has completed, the work request's | 
 |  * buffer is pointed at the header. | 
 |  * | 
 |  * This will advance the pointer to the data portion | 
 |  * of the control message of the work request's buffer that | 
 |  * was populated after the work request finished. | 
 |  */ | 
 | static void qemu_rdma_move_header(RDMAContext *rdma, int idx, | 
 |                                   RDMAControlHeader *head) | 
 | { | 
 |     rdma->wr_data[idx].control_len = head->len; | 
 |     rdma->wr_data[idx].control_curr = | 
 |         rdma->wr_data[idx].control + sizeof(RDMAControlHeader); | 
 | } | 
 |  | 
 | /* | 
 |  * This is an 'atomic' high-level operation to deliver a single, unified | 
 |  * control-channel message. | 
 |  * | 
 |  * Additionally, if the user is expecting some kind of reply to this message, | 
 |  * they can request a 'resp' response message be filled in by posting an | 
 |  * additional work request on behalf of the user and waiting for an additional | 
 |  * completion. | 
 |  * | 
 |  * The extra (optional) response is used during registration to us from having | 
 |  * to perform an *additional* exchange of message just to provide a response by | 
 |  * instead piggy-backing on the acknowledgement. | 
 |  */ | 
 | static int qemu_rdma_exchange_send(RDMAContext *rdma, RDMAControlHeader *head, | 
 |                                    uint8_t *data, RDMAControlHeader *resp, | 
 |                                    int *resp_idx, | 
 |                                    int (*callback)(RDMAContext *rdma, | 
 |                                                    Error **errp), | 
 |                                    Error **errp) | 
 | { | 
 |     int ret; | 
 |  | 
 |     /* | 
 |      * Wait until the dest is ready before attempting to deliver the message | 
 |      * by waiting for a READY message. | 
 |      */ | 
 |     if (rdma->control_ready_expected) { | 
 |         RDMAControlHeader resp_ignored; | 
 |  | 
 |         ret = qemu_rdma_exchange_get_response(rdma, &resp_ignored, | 
 |                                               RDMA_CONTROL_READY, | 
 |                                               RDMA_WRID_READY, errp); | 
 |         if (ret < 0) { | 
 |             return -1; | 
 |         } | 
 |     } | 
 |  | 
 |     /* | 
 |      * If the user is expecting a response, post a WR in anticipation of it. | 
 |      */ | 
 |     if (resp) { | 
 |         ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_DATA, errp); | 
 |         if (ret < 0) { | 
 |             return -1; | 
 |         } | 
 |     } | 
 |  | 
 |     /* | 
 |      * Post a WR to replace the one we just consumed for the READY message. | 
 |      */ | 
 |     ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY, errp); | 
 |     if (ret < 0) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     /* | 
 |      * Deliver the control message that was requested. | 
 |      */ | 
 |     ret = qemu_rdma_post_send_control(rdma, data, head, errp); | 
 |  | 
 |     if (ret < 0) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     /* | 
 |      * If we're expecting a response, block and wait for it. | 
 |      */ | 
 |     if (resp) { | 
 |         if (callback) { | 
 |             trace_qemu_rdma_exchange_send_issue_callback(); | 
 |             ret = callback(rdma, errp); | 
 |             if (ret < 0) { | 
 |                 return -1; | 
 |             } | 
 |         } | 
 |  | 
 |         trace_qemu_rdma_exchange_send_waiting(control_desc(resp->type)); | 
 |         ret = qemu_rdma_exchange_get_response(rdma, resp, | 
 |                                               resp->type, RDMA_WRID_DATA, | 
 |                                               errp); | 
 |  | 
 |         if (ret < 0) { | 
 |             return -1; | 
 |         } | 
 |  | 
 |         qemu_rdma_move_header(rdma, RDMA_WRID_DATA, resp); | 
 |         if (resp_idx) { | 
 |             *resp_idx = RDMA_WRID_DATA; | 
 |         } | 
 |         trace_qemu_rdma_exchange_send_received(control_desc(resp->type)); | 
 |     } | 
 |  | 
 |     rdma->control_ready_expected = 1; | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * This is an 'atomic' high-level operation to receive a single, unified | 
 |  * control-channel message. | 
 |  */ | 
 | static int qemu_rdma_exchange_recv(RDMAContext *rdma, RDMAControlHeader *head, | 
 |                                    uint32_t expecting, Error **errp) | 
 | { | 
 |     RDMAControlHeader ready = { | 
 |                                 .len = 0, | 
 |                                 .type = RDMA_CONTROL_READY, | 
 |                                 .repeat = 1, | 
 |                               }; | 
 |     int ret; | 
 |  | 
 |     /* | 
 |      * Inform the source that we're ready to receive a message. | 
 |      */ | 
 |     ret = qemu_rdma_post_send_control(rdma, NULL, &ready, errp); | 
 |  | 
 |     if (ret < 0) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     /* | 
 |      * Block and wait for the message. | 
 |      */ | 
 |     ret = qemu_rdma_exchange_get_response(rdma, head, | 
 |                                           expecting, RDMA_WRID_READY, errp); | 
 |  | 
 |     if (ret < 0) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     qemu_rdma_move_header(rdma, RDMA_WRID_READY, head); | 
 |  | 
 |     /* | 
 |      * Post a new RECV work request to replace the one we just consumed. | 
 |      */ | 
 |     ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY, errp); | 
 |     if (ret < 0) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Write an actual chunk of memory using RDMA. | 
 |  * | 
 |  * If we're using dynamic registration on the dest-side, we have to | 
 |  * send a registration command first. | 
 |  */ | 
 | static int qemu_rdma_write_one(RDMAContext *rdma, | 
 |                                int current_index, uint64_t current_addr, | 
 |                                uint64_t length, Error **errp) | 
 | { | 
 |     struct ibv_sge sge; | 
 |     struct ibv_send_wr send_wr = { 0 }; | 
 |     struct ibv_send_wr *bad_wr; | 
 |     int reg_result_idx, ret, count = 0; | 
 |     uint64_t chunk, chunks; | 
 |     uint8_t *chunk_start, *chunk_end; | 
 |     RDMALocalBlock *block = &(rdma->local_ram_blocks.block[current_index]); | 
 |     RDMARegister reg; | 
 |     RDMARegisterResult *reg_result; | 
 |     RDMAControlHeader resp = { .type = RDMA_CONTROL_REGISTER_RESULT }; | 
 |     RDMAControlHeader head = { .len = sizeof(RDMARegister), | 
 |                                .type = RDMA_CONTROL_REGISTER_REQUEST, | 
 |                                .repeat = 1, | 
 |                              }; | 
 |  | 
 | retry: | 
 |     sge.addr = (uintptr_t)(block->local_host_addr + | 
 |                             (current_addr - block->offset)); | 
 |     sge.length = length; | 
 |  | 
 |     chunk = ram_chunk_index(block->local_host_addr, | 
 |                             (uint8_t *)(uintptr_t)sge.addr); | 
 |     chunk_start = ram_chunk_start(block, chunk); | 
 |  | 
 |     if (block->is_ram_block) { | 
 |         chunks = length / (1UL << RDMA_REG_CHUNK_SHIFT); | 
 |  | 
 |         if (chunks && ((length % (1UL << RDMA_REG_CHUNK_SHIFT)) == 0)) { | 
 |             chunks--; | 
 |         } | 
 |     } else { | 
 |         chunks = block->length / (1UL << RDMA_REG_CHUNK_SHIFT); | 
 |  | 
 |         if (chunks && ((block->length % (1UL << RDMA_REG_CHUNK_SHIFT)) == 0)) { | 
 |             chunks--; | 
 |         } | 
 |     } | 
 |  | 
 |     trace_qemu_rdma_write_one_top(chunks + 1, | 
 |                                   (chunks + 1) * | 
 |                                   (1UL << RDMA_REG_CHUNK_SHIFT) / 1024 / 1024); | 
 |  | 
 |     chunk_end = ram_chunk_end(block, chunk + chunks); | 
 |  | 
 |  | 
 |     while (test_bit(chunk, block->transit_bitmap)) { | 
 |         (void)count; | 
 |         trace_qemu_rdma_write_one_block(count++, current_index, chunk, | 
 |                 sge.addr, length, rdma->nb_sent, block->nb_chunks); | 
 |  | 
 |         ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RDMA_WRITE, NULL); | 
 |  | 
 |         if (ret < 0) { | 
 |             error_setg(errp, "Failed to Wait for previous write to complete " | 
 |                     "block %d chunk %" PRIu64 | 
 |                     " current %" PRIu64 " len %" PRIu64 " %d", | 
 |                     current_index, chunk, sge.addr, length, rdma->nb_sent); | 
 |             return -1; | 
 |         } | 
 |     } | 
 |  | 
 |     if (!rdma->pin_all || !block->is_ram_block) { | 
 |         if (!block->remote_keys[chunk]) { | 
 |             /* | 
 |              * This chunk has not yet been registered, so first check to see | 
 |              * if the entire chunk is zero. If so, tell the other size to | 
 |              * memset() + madvise() the entire chunk without RDMA. | 
 |              */ | 
 |  | 
 |             if (buffer_is_zero((void *)(uintptr_t)sge.addr, length)) { | 
 |                 RDMACompress comp = { | 
 |                                         .offset = current_addr, | 
 |                                         .value = 0, | 
 |                                         .block_idx = current_index, | 
 |                                         .length = length, | 
 |                                     }; | 
 |  | 
 |                 head.len = sizeof(comp); | 
 |                 head.type = RDMA_CONTROL_COMPRESS; | 
 |  | 
 |                 trace_qemu_rdma_write_one_zero(chunk, sge.length, | 
 |                                                current_index, current_addr); | 
 |  | 
 |                 compress_to_network(rdma, &comp); | 
 |                 ret = qemu_rdma_exchange_send(rdma, &head, | 
 |                                 (uint8_t *) &comp, NULL, NULL, NULL, errp); | 
 |  | 
 |                 if (ret < 0) { | 
 |                     return -1; | 
 |                 } | 
 |  | 
 |                 /* | 
 |                  * TODO: Here we are sending something, but we are not | 
 |                  * accounting for anything transferred.  The following is wrong: | 
 |                  * | 
 |                  * stat64_add(&mig_stats.rdma_bytes, sge.length); | 
 |                  * | 
 |                  * because we are using some kind of compression.  I | 
 |                  * would think that head.len would be the more similar | 
 |                  * thing to a correct value. | 
 |                  */ | 
 |                 stat64_add(&mig_stats.zero_pages, | 
 |                            sge.length / qemu_target_page_size()); | 
 |                 return 1; | 
 |             } | 
 |  | 
 |             /* | 
 |              * Otherwise, tell other side to register. | 
 |              */ | 
 |             reg.current_index = current_index; | 
 |             if (block->is_ram_block) { | 
 |                 reg.key.current_addr = current_addr; | 
 |             } else { | 
 |                 reg.key.chunk = chunk; | 
 |             } | 
 |             reg.chunks = chunks; | 
 |  | 
 |             trace_qemu_rdma_write_one_sendreg(chunk, sge.length, current_index, | 
 |                                               current_addr); | 
 |  | 
 |             register_to_network(rdma, ®); | 
 |             ret = qemu_rdma_exchange_send(rdma, &head, (uint8_t *) ®, | 
 |                                     &resp, ®_result_idx, NULL, errp); | 
 |             if (ret < 0) { | 
 |                 return -1; | 
 |             } | 
 |  | 
 |             /* try to overlap this single registration with the one we sent. */ | 
 |             if (qemu_rdma_register_and_get_keys(rdma, block, sge.addr, | 
 |                                                 &sge.lkey, NULL, chunk, | 
 |                                                 chunk_start, chunk_end)) { | 
 |                 error_setg(errp, "cannot get lkey"); | 
 |                 return -1; | 
 |             } | 
 |  | 
 |             reg_result = (RDMARegisterResult *) | 
 |                     rdma->wr_data[reg_result_idx].control_curr; | 
 |  | 
 |             network_to_result(reg_result); | 
 |  | 
 |             trace_qemu_rdma_write_one_recvregres(block->remote_keys[chunk], | 
 |                                                  reg_result->rkey, chunk); | 
 |  | 
 |             block->remote_keys[chunk] = reg_result->rkey; | 
 |             block->remote_host_addr = reg_result->host_addr; | 
 |         } else { | 
 |             /* already registered before */ | 
 |             if (qemu_rdma_register_and_get_keys(rdma, block, sge.addr, | 
 |                                                 &sge.lkey, NULL, chunk, | 
 |                                                 chunk_start, chunk_end)) { | 
 |                 error_setg(errp, "cannot get lkey!"); | 
 |                 return -1; | 
 |             } | 
 |         } | 
 |  | 
 |         send_wr.wr.rdma.rkey = block->remote_keys[chunk]; | 
 |     } else { | 
 |         send_wr.wr.rdma.rkey = block->remote_rkey; | 
 |  | 
 |         if (qemu_rdma_register_and_get_keys(rdma, block, sge.addr, | 
 |                                                      &sge.lkey, NULL, chunk, | 
 |                                                      chunk_start, chunk_end)) { | 
 |             error_setg(errp, "cannot get lkey!"); | 
 |             return -1; | 
 |         } | 
 |     } | 
 |  | 
 |     /* | 
 |      * Encode the ram block index and chunk within this wrid. | 
 |      * We will use this information at the time of completion | 
 |      * to figure out which bitmap to check against and then which | 
 |      * chunk in the bitmap to look for. | 
 |      */ | 
 |     send_wr.wr_id = qemu_rdma_make_wrid(RDMA_WRID_RDMA_WRITE, | 
 |                                         current_index, chunk); | 
 |  | 
 |     send_wr.opcode = IBV_WR_RDMA_WRITE; | 
 |     send_wr.send_flags = IBV_SEND_SIGNALED; | 
 |     send_wr.sg_list = &sge; | 
 |     send_wr.num_sge = 1; | 
 |     send_wr.wr.rdma.remote_addr = block->remote_host_addr + | 
 |                                 (current_addr - block->offset); | 
 |  | 
 |     trace_qemu_rdma_write_one_post(chunk, sge.addr, send_wr.wr.rdma.remote_addr, | 
 |                                    sge.length); | 
 |  | 
 |     /* | 
 |      * ibv_post_send() does not return negative error numbers, | 
 |      * per the specification they are positive - no idea why. | 
 |      */ | 
 |     ret = ibv_post_send(rdma->qp, &send_wr, &bad_wr); | 
 |  | 
 |     if (ret == ENOMEM) { | 
 |         trace_qemu_rdma_write_one_queue_full(); | 
 |         ret = qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RDMA_WRITE, NULL); | 
 |         if (ret < 0) { | 
 |             error_setg(errp, "rdma migration: failed to make " | 
 |                          "room in full send queue!"); | 
 |             return -1; | 
 |         } | 
 |  | 
 |         goto retry; | 
 |  | 
 |     } else if (ret > 0) { | 
 |         error_setg_errno(errp, ret, | 
 |                          "rdma migration: post rdma write failed"); | 
 |         return -1; | 
 |     } | 
 |  | 
 |     set_bit(chunk, block->transit_bitmap); | 
 |     stat64_add(&mig_stats.normal_pages, sge.length / qemu_target_page_size()); | 
 |     /* | 
 |      * We are adding to transferred the amount of data written, but no | 
 |      * overhead at all.  I will assume that RDMA is magicaly and don't | 
 |      * need to transfer (at least) the addresses where it wants to | 
 |      * write the pages.  Here it looks like it should be something | 
 |      * like: | 
 |      *     sizeof(send_wr) + sge.length | 
 |      * but this being RDMA, who knows. | 
 |      */ | 
 |     stat64_add(&mig_stats.rdma_bytes, sge.length); | 
 |     ram_transferred_add(sge.length); | 
 |     rdma->total_writes++; | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Push out any unwritten RDMA operations. | 
 |  * | 
 |  * We support sending out multiple chunks at the same time. | 
 |  * Not all of them need to get signaled in the completion queue. | 
 |  */ | 
 | static int qemu_rdma_write_flush(RDMAContext *rdma, Error **errp) | 
 | { | 
 |     int ret; | 
 |  | 
 |     if (!rdma->current_length) { | 
 |         return 0; | 
 |     } | 
 |  | 
 |     ret = qemu_rdma_write_one(rdma, rdma->current_index, rdma->current_addr, | 
 |                               rdma->current_length, errp); | 
 |  | 
 |     if (ret < 0) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     if (ret == 0) { | 
 |         rdma->nb_sent++; | 
 |         trace_qemu_rdma_write_flush(rdma->nb_sent); | 
 |     } | 
 |  | 
 |     rdma->current_length = 0; | 
 |     rdma->current_addr = 0; | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | static inline bool qemu_rdma_buffer_mergeable(RDMAContext *rdma, | 
 |                     uint64_t offset, uint64_t len) | 
 | { | 
 |     RDMALocalBlock *block; | 
 |     uint8_t *host_addr; | 
 |     uint8_t *chunk_end; | 
 |  | 
 |     if (rdma->current_index < 0) { | 
 |         return false; | 
 |     } | 
 |  | 
 |     if (rdma->current_chunk < 0) { | 
 |         return false; | 
 |     } | 
 |  | 
 |     block = &(rdma->local_ram_blocks.block[rdma->current_index]); | 
 |     host_addr = block->local_host_addr + (offset - block->offset); | 
 |     chunk_end = ram_chunk_end(block, rdma->current_chunk); | 
 |  | 
 |     if (rdma->current_length == 0) { | 
 |         return false; | 
 |     } | 
 |  | 
 |     /* | 
 |      * Only merge into chunk sequentially. | 
 |      */ | 
 |     if (offset != (rdma->current_addr + rdma->current_length)) { | 
 |         return false; | 
 |     } | 
 |  | 
 |     if (offset < block->offset) { | 
 |         return false; | 
 |     } | 
 |  | 
 |     if ((offset + len) > (block->offset + block->length)) { | 
 |         return false; | 
 |     } | 
 |  | 
 |     if ((host_addr + len) > chunk_end) { | 
 |         return false; | 
 |     } | 
 |  | 
 |     return true; | 
 | } | 
 |  | 
 | /* | 
 |  * We're not actually writing here, but doing three things: | 
 |  * | 
 |  * 1. Identify the chunk the buffer belongs to. | 
 |  * 2. If the chunk is full or the buffer doesn't belong to the current | 
 |  *    chunk, then start a new chunk and flush() the old chunk. | 
 |  * 3. To keep the hardware busy, we also group chunks into batches | 
 |  *    and only require that a batch gets acknowledged in the completion | 
 |  *    queue instead of each individual chunk. | 
 |  */ | 
 | static int qemu_rdma_write(RDMAContext *rdma, | 
 |                            uint64_t block_offset, uint64_t offset, | 
 |                            uint64_t len, Error **errp) | 
 | { | 
 |     uint64_t current_addr = block_offset + offset; | 
 |     uint64_t index = rdma->current_index; | 
 |     uint64_t chunk = rdma->current_chunk; | 
 |  | 
 |     /* If we cannot merge it, we flush the current buffer first. */ | 
 |     if (!qemu_rdma_buffer_mergeable(rdma, current_addr, len)) { | 
 |         if (qemu_rdma_write_flush(rdma, errp) < 0) { | 
 |             return -1; | 
 |         } | 
 |         rdma->current_length = 0; | 
 |         rdma->current_addr = current_addr; | 
 |  | 
 |         qemu_rdma_search_ram_block(rdma, block_offset, | 
 |                                    offset, len, &index, &chunk); | 
 |         rdma->current_index = index; | 
 |         rdma->current_chunk = chunk; | 
 |     } | 
 |  | 
 |     /* merge it */ | 
 |     rdma->current_length += len; | 
 |  | 
 |     /* flush it if buffer is too large */ | 
 |     if (rdma->current_length >= RDMA_MERGE_MAX) { | 
 |         return qemu_rdma_write_flush(rdma, errp); | 
 |     } | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | static void qemu_rdma_cleanup(RDMAContext *rdma) | 
 | { | 
 |     Error *err = NULL; | 
 |  | 
 |     if (rdma->cm_id && rdma->connected) { | 
 |         if ((rdma->errored || | 
 |              migrate_get_current()->state == MIGRATION_STATUS_CANCELLING) && | 
 |             !rdma->received_error) { | 
 |             RDMAControlHeader head = { .len = 0, | 
 |                                        .type = RDMA_CONTROL_ERROR, | 
 |                                        .repeat = 1, | 
 |                                      }; | 
 |             warn_report("Early error. Sending error."); | 
 |             if (qemu_rdma_post_send_control(rdma, NULL, &head, &err) < 0) { | 
 |                 warn_report_err(err); | 
 |             } | 
 |         } | 
 |  | 
 |         rdma_disconnect(rdma->cm_id); | 
 |         trace_qemu_rdma_cleanup_disconnect(); | 
 |         rdma->connected = false; | 
 |     } | 
 |  | 
 |     if (rdma->channel) { | 
 |         qemu_set_fd_handler(rdma->channel->fd, NULL, NULL, NULL); | 
 |     } | 
 |     g_free(rdma->dest_blocks); | 
 |     rdma->dest_blocks = NULL; | 
 |  | 
 |     for (int i = 0; i < RDMA_WRID_MAX; i++) { | 
 |         if (rdma->wr_data[i].control_mr) { | 
 |             rdma->total_registrations--; | 
 |             ibv_dereg_mr(rdma->wr_data[i].control_mr); | 
 |         } | 
 |         rdma->wr_data[i].control_mr = NULL; | 
 |     } | 
 |  | 
 |     if (rdma->local_ram_blocks.block) { | 
 |         while (rdma->local_ram_blocks.nb_blocks) { | 
 |             rdma_delete_block(rdma, &rdma->local_ram_blocks.block[0]); | 
 |         } | 
 |     } | 
 |  | 
 |     if (rdma->qp) { | 
 |         rdma_destroy_qp(rdma->cm_id); | 
 |         rdma->qp = NULL; | 
 |     } | 
 |     if (rdma->recv_cq) { | 
 |         ibv_destroy_cq(rdma->recv_cq); | 
 |         rdma->recv_cq = NULL; | 
 |     } | 
 |     if (rdma->send_cq) { | 
 |         ibv_destroy_cq(rdma->send_cq); | 
 |         rdma->send_cq = NULL; | 
 |     } | 
 |     if (rdma->recv_comp_channel) { | 
 |         ibv_destroy_comp_channel(rdma->recv_comp_channel); | 
 |         rdma->recv_comp_channel = NULL; | 
 |     } | 
 |     if (rdma->send_comp_channel) { | 
 |         ibv_destroy_comp_channel(rdma->send_comp_channel); | 
 |         rdma->send_comp_channel = NULL; | 
 |     } | 
 |     if (rdma->pd) { | 
 |         ibv_dealloc_pd(rdma->pd); | 
 |         rdma->pd = NULL; | 
 |     } | 
 |     if (rdma->cm_id) { | 
 |         rdma_destroy_id(rdma->cm_id); | 
 |         rdma->cm_id = NULL; | 
 |     } | 
 |  | 
 |     /* the destination side, listen_id and channel is shared */ | 
 |     if (rdma->listen_id) { | 
 |         if (!rdma->is_return_path) { | 
 |             rdma_destroy_id(rdma->listen_id); | 
 |         } | 
 |         rdma->listen_id = NULL; | 
 |  | 
 |         if (rdma->channel) { | 
 |             if (!rdma->is_return_path) { | 
 |                 rdma_destroy_event_channel(rdma->channel); | 
 |             } | 
 |             rdma->channel = NULL; | 
 |         } | 
 |     } | 
 |  | 
 |     if (rdma->channel) { | 
 |         rdma_destroy_event_channel(rdma->channel); | 
 |         rdma->channel = NULL; | 
 |     } | 
 |     g_free(rdma->host); | 
 |     rdma->host = NULL; | 
 | } | 
 |  | 
 |  | 
 | static int qemu_rdma_source_init(RDMAContext *rdma, bool pin_all, Error **errp) | 
 | { | 
 |     int ret; | 
 |  | 
 |     /* | 
 |      * Will be validated against destination's actual capabilities | 
 |      * after the connect() completes. | 
 |      */ | 
 |     rdma->pin_all = pin_all; | 
 |  | 
 |     ret = qemu_rdma_resolve_host(rdma, errp); | 
 |     if (ret < 0) { | 
 |         goto err_rdma_source_init; | 
 |     } | 
 |  | 
 |     ret = qemu_rdma_alloc_pd_cq(rdma, errp); | 
 |     if (ret < 0) { | 
 |         goto err_rdma_source_init; | 
 |     } | 
 |  | 
 |     ret = qemu_rdma_alloc_qp(rdma); | 
 |     if (ret < 0) { | 
 |         error_setg(errp, "RDMA ERROR: rdma migration: error allocating qp!"); | 
 |         goto err_rdma_source_init; | 
 |     } | 
 |  | 
 |     qemu_rdma_init_ram_blocks(rdma); | 
 |  | 
 |     /* Build the hash that maps from offset to RAMBlock */ | 
 |     rdma->blockmap = g_hash_table_new(g_direct_hash, g_direct_equal); | 
 |     for (int i = 0; i < rdma->local_ram_blocks.nb_blocks; i++) { | 
 |         g_hash_table_insert(rdma->blockmap, | 
 |                 (void *)(uintptr_t)rdma->local_ram_blocks.block[i].offset, | 
 |                 &rdma->local_ram_blocks.block[i]); | 
 |     } | 
 |  | 
 |     for (int i = 0; i < RDMA_WRID_MAX; i++) { | 
 |         ret = qemu_rdma_reg_control(rdma, i); | 
 |         if (ret < 0) { | 
 |             error_setg(errp, "RDMA ERROR: rdma migration: error " | 
 |                        "registering %d control!", i); | 
 |             goto err_rdma_source_init; | 
 |         } | 
 |     } | 
 |  | 
 |     return 0; | 
 |  | 
 | err_rdma_source_init: | 
 |     qemu_rdma_cleanup(rdma); | 
 |     return -1; | 
 | } | 
 |  | 
 | static int qemu_get_cm_event_timeout(RDMAContext *rdma, | 
 |                                      struct rdma_cm_event **cm_event, | 
 |                                      long msec, Error **errp) | 
 | { | 
 |     int ret; | 
 |     struct pollfd poll_fd = { | 
 |                                 .fd = rdma->channel->fd, | 
 |                                 .events = POLLIN, | 
 |                                 .revents = 0 | 
 |                             }; | 
 |  | 
 |     do { | 
 |         ret = poll(&poll_fd, 1, msec); | 
 |     } while (ret < 0 && errno == EINTR); | 
 |  | 
 |     if (ret == 0) { | 
 |         error_setg(errp, "RDMA ERROR: poll cm event timeout"); | 
 |         return -1; | 
 |     } else if (ret < 0) { | 
 |         error_setg(errp, "RDMA ERROR: failed to poll cm event, errno=%i", | 
 |                    errno); | 
 |         return -1; | 
 |     } else if (poll_fd.revents & POLLIN) { | 
 |         if (rdma_get_cm_event(rdma->channel, cm_event) < 0) { | 
 |             error_setg(errp, "RDMA ERROR: failed to get cm event"); | 
 |             return -1; | 
 |         } | 
 |         return 0; | 
 |     } else { | 
 |         error_setg(errp, "RDMA ERROR: no POLLIN event, revent=%x", | 
 |                    poll_fd.revents); | 
 |         return -1; | 
 |     } | 
 | } | 
 |  | 
 | static int qemu_rdma_connect(RDMAContext *rdma, bool return_path, | 
 |                              Error **errp) | 
 | { | 
 |     RDMACapabilities cap = { | 
 |                                 .version = RDMA_CONTROL_VERSION_CURRENT, | 
 |                                 .flags = 0, | 
 |                            }; | 
 |     struct rdma_conn_param conn_param = { .initiator_depth = 2, | 
 |                                           .retry_count = 5, | 
 |                                           .private_data = &cap, | 
 |                                           .private_data_len = sizeof(cap), | 
 |                                         }; | 
 |     struct rdma_cm_event *cm_event; | 
 |     int ret; | 
 |  | 
 |     /* | 
 |      * Only negotiate the capability with destination if the user | 
 |      * on the source first requested the capability. | 
 |      */ | 
 |     if (rdma->pin_all) { | 
 |         trace_qemu_rdma_connect_pin_all_requested(); | 
 |         cap.flags |= RDMA_CAPABILITY_PIN_ALL; | 
 |     } | 
 |  | 
 |     caps_to_network(&cap); | 
 |  | 
 |     ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY, errp); | 
 |     if (ret < 0) { | 
 |         goto err_rdma_source_connect; | 
 |     } | 
 |  | 
 |     ret = rdma_connect(rdma->cm_id, &conn_param); | 
 |     if (ret < 0) { | 
 |         error_setg_errno(errp, errno, | 
 |                          "RDMA ERROR: connecting to destination!"); | 
 |         goto err_rdma_source_connect; | 
 |     } | 
 |  | 
 |     if (return_path) { | 
 |         ret = qemu_get_cm_event_timeout(rdma, &cm_event, 5000, errp); | 
 |     } else { | 
 |         ret = rdma_get_cm_event(rdma->channel, &cm_event); | 
 |         if (ret < 0) { | 
 |             error_setg_errno(errp, errno, | 
 |                              "RDMA ERROR: failed to get cm event"); | 
 |         } | 
 |     } | 
 |     if (ret < 0) { | 
 |         goto err_rdma_source_connect; | 
 |     } | 
 |  | 
 |     if (cm_event->event != RDMA_CM_EVENT_ESTABLISHED) { | 
 |         error_setg(errp, "RDMA ERROR: connecting to destination!"); | 
 |         rdma_ack_cm_event(cm_event); | 
 |         goto err_rdma_source_connect; | 
 |     } | 
 |     rdma->connected = true; | 
 |  | 
 |     memcpy(&cap, cm_event->param.conn.private_data, sizeof(cap)); | 
 |     network_to_caps(&cap); | 
 |  | 
 |     /* | 
 |      * Verify that the *requested* capabilities are supported by the destination | 
 |      * and disable them otherwise. | 
 |      */ | 
 |     if (rdma->pin_all && !(cap.flags & RDMA_CAPABILITY_PIN_ALL)) { | 
 |         warn_report("RDMA: Server cannot support pinning all memory. " | 
 |                     "Will register memory dynamically."); | 
 |         rdma->pin_all = false; | 
 |     } | 
 |  | 
 |     trace_qemu_rdma_connect_pin_all_outcome(rdma->pin_all); | 
 |  | 
 |     rdma_ack_cm_event(cm_event); | 
 |  | 
 |     rdma->control_ready_expected = 1; | 
 |     rdma->nb_sent = 0; | 
 |     return 0; | 
 |  | 
 | err_rdma_source_connect: | 
 |     qemu_rdma_cleanup(rdma); | 
 |     return -1; | 
 | } | 
 |  | 
 | static int qemu_rdma_dest_init(RDMAContext *rdma, Error **errp) | 
 | { | 
 |     Error *err = NULL; | 
 |     int ret; | 
 |     struct rdma_cm_id *listen_id; | 
 |     char ip[40] = "unknown"; | 
 |     struct rdma_addrinfo *res, *e; | 
 |     char port_str[16]; | 
 |     int reuse = 1; | 
 |  | 
 |     for (int i = 0; i < RDMA_WRID_MAX; i++) { | 
 |         rdma->wr_data[i].control_len = 0; | 
 |         rdma->wr_data[i].control_curr = NULL; | 
 |     } | 
 |  | 
 |     if (!rdma->host || !rdma->host[0]) { | 
 |         error_setg(errp, "RDMA ERROR: RDMA host is not set!"); | 
 |         rdma->errored = true; | 
 |         return -1; | 
 |     } | 
 |     /* create CM channel */ | 
 |     rdma->channel = rdma_create_event_channel(); | 
 |     if (!rdma->channel) { | 
 |         error_setg(errp, "RDMA ERROR: could not create rdma event channel"); | 
 |         rdma->errored = true; | 
 |         return -1; | 
 |     } | 
 |  | 
 |     /* create CM id */ | 
 |     ret = rdma_create_id(rdma->channel, &listen_id, NULL, RDMA_PS_TCP); | 
 |     if (ret < 0) { | 
 |         error_setg(errp, "RDMA ERROR: could not create cm_id!"); | 
 |         goto err_dest_init_create_listen_id; | 
 |     } | 
 |  | 
 |     snprintf(port_str, 16, "%d", rdma->port); | 
 |     port_str[15] = '\0'; | 
 |  | 
 |     ret = rdma_getaddrinfo(rdma->host, port_str, NULL, &res); | 
 |     if (ret) { | 
 |         error_setg(errp, "RDMA ERROR: could not rdma_getaddrinfo address %s", | 
 |                    rdma->host); | 
 |         goto err_dest_init_bind_addr; | 
 |     } | 
 |  | 
 |     ret = rdma_set_option(listen_id, RDMA_OPTION_ID, RDMA_OPTION_ID_REUSEADDR, | 
 |                           &reuse, sizeof reuse); | 
 |     if (ret < 0) { | 
 |         error_setg(errp, "RDMA ERROR: Error: could not set REUSEADDR option"); | 
 |         goto err_dest_init_bind_addr; | 
 |     } | 
 |  | 
 |     /* Try all addresses, saving the first error in @err */ | 
 |     for (e = res; e != NULL; e = e->ai_next) { | 
 |         Error **local_errp = err ? NULL : &err; | 
 |  | 
 |         inet_ntop(e->ai_family, | 
 |             &((struct sockaddr_in *) e->ai_dst_addr)->sin_addr, ip, sizeof ip); | 
 |         trace_qemu_rdma_dest_init_trying(rdma->host, ip); | 
 |         ret = rdma_bind_addr(listen_id, e->ai_dst_addr); | 
 |         if (ret < 0) { | 
 |             continue; | 
 |         } | 
 |         if (e->ai_family == AF_INET6) { | 
 |             ret = qemu_rdma_broken_ipv6_kernel(listen_id->verbs, | 
 |                                                local_errp); | 
 |             if (ret < 0) { | 
 |                 continue; | 
 |             } | 
 |         } | 
 |         error_free(err); | 
 |         break; | 
 |     } | 
 |  | 
 |     rdma_freeaddrinfo(res); | 
 |     if (!e) { | 
 |         if (err) { | 
 |             error_propagate(errp, err); | 
 |         } else { | 
 |             error_setg(errp, "RDMA ERROR: Error: could not rdma_bind_addr!"); | 
 |         } | 
 |         goto err_dest_init_bind_addr; | 
 |     } | 
 |  | 
 |     rdma->listen_id = listen_id; | 
 |     qemu_rdma_dump_gid("dest_init", listen_id); | 
 |     return 0; | 
 |  | 
 | err_dest_init_bind_addr: | 
 |     rdma_destroy_id(listen_id); | 
 | err_dest_init_create_listen_id: | 
 |     rdma_destroy_event_channel(rdma->channel); | 
 |     rdma->channel = NULL; | 
 |     rdma->errored = true; | 
 |     return -1; | 
 |  | 
 | } | 
 |  | 
 | static void qemu_rdma_return_path_dest_init(RDMAContext *rdma_return_path, | 
 |                                             RDMAContext *rdma) | 
 | { | 
 |     for (int i = 0; i < RDMA_WRID_MAX; i++) { | 
 |         rdma_return_path->wr_data[i].control_len = 0; | 
 |         rdma_return_path->wr_data[i].control_curr = NULL; | 
 |     } | 
 |  | 
 |     /*the CM channel and CM id is shared*/ | 
 |     rdma_return_path->channel = rdma->channel; | 
 |     rdma_return_path->listen_id = rdma->listen_id; | 
 |  | 
 |     rdma->return_path = rdma_return_path; | 
 |     rdma_return_path->return_path = rdma; | 
 |     rdma_return_path->is_return_path = true; | 
 | } | 
 |  | 
 | static RDMAContext *qemu_rdma_data_init(InetSocketAddress *saddr, Error **errp) | 
 | { | 
 |     RDMAContext *rdma = NULL; | 
 |  | 
 |     rdma = g_new0(RDMAContext, 1); | 
 |     rdma->current_index = -1; | 
 |     rdma->current_chunk = -1; | 
 |  | 
 |     rdma->host = g_strdup(saddr->host); | 
 |     rdma->port = atoi(saddr->port); | 
 |     return rdma; | 
 | } | 
 |  | 
 | /* | 
 |  * QEMUFile interface to the control channel. | 
 |  * SEND messages for control only. | 
 |  * VM's ram is handled with regular RDMA messages. | 
 |  */ | 
 | static ssize_t qio_channel_rdma_writev(QIOChannel *ioc, | 
 |                                        const struct iovec *iov, | 
 |                                        size_t niov, | 
 |                                        int *fds, | 
 |                                        size_t nfds, | 
 |                                        int flags, | 
 |                                        Error **errp) | 
 | { | 
 |     QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc); | 
 |     RDMAContext *rdma; | 
 |     int ret; | 
 |     ssize_t done = 0; | 
 |     size_t len; | 
 |  | 
 |     RCU_READ_LOCK_GUARD(); | 
 |     rdma = qatomic_rcu_read(&rioc->rdmaout); | 
 |  | 
 |     if (!rdma) { | 
 |         error_setg(errp, "RDMA control channel output is not set"); | 
 |         return -1; | 
 |     } | 
 |  | 
 |     if (rdma->errored) { | 
 |         error_setg(errp, | 
 |                    "RDMA is in an error state waiting migration to abort!"); | 
 |         return -1; | 
 |     } | 
 |  | 
 |     /* | 
 |      * Push out any writes that | 
 |      * we're queued up for VM's ram. | 
 |      */ | 
 |     ret = qemu_rdma_write_flush(rdma, errp); | 
 |     if (ret < 0) { | 
 |         rdma->errored = true; | 
 |         return -1; | 
 |     } | 
 |  | 
 |     for (int i = 0; i < niov; i++) { | 
 |         size_t remaining = iov[i].iov_len; | 
 |         uint8_t * data = (void *)iov[i].iov_base; | 
 |         while (remaining) { | 
 |             RDMAControlHeader head = {}; | 
 |  | 
 |             len = MIN(remaining, RDMA_SEND_INCREMENT); | 
 |             remaining -= len; | 
 |  | 
 |             head.len = len; | 
 |             head.type = RDMA_CONTROL_QEMU_FILE; | 
 |  | 
 |             ret = qemu_rdma_exchange_send(rdma, &head, | 
 |                                           data, NULL, NULL, NULL, errp); | 
 |  | 
 |             if (ret < 0) { | 
 |                 rdma->errored = true; | 
 |                 return -1; | 
 |             } | 
 |  | 
 |             data += len; | 
 |             done += len; | 
 |         } | 
 |     } | 
 |  | 
 |     return done; | 
 | } | 
 |  | 
 | static size_t qemu_rdma_fill(RDMAContext *rdma, uint8_t *buf, | 
 |                              size_t size, int idx) | 
 | { | 
 |     size_t len = 0; | 
 |  | 
 |     if (rdma->wr_data[idx].control_len) { | 
 |         trace_qemu_rdma_fill(rdma->wr_data[idx].control_len, size); | 
 |  | 
 |         len = MIN(size, rdma->wr_data[idx].control_len); | 
 |         memcpy(buf, rdma->wr_data[idx].control_curr, len); | 
 |         rdma->wr_data[idx].control_curr += len; | 
 |         rdma->wr_data[idx].control_len -= len; | 
 |     } | 
 |  | 
 |     return len; | 
 | } | 
 |  | 
 | /* | 
 |  * QEMUFile interface to the control channel. | 
 |  * RDMA links don't use bytestreams, so we have to | 
 |  * return bytes to QEMUFile opportunistically. | 
 |  */ | 
 | static ssize_t qio_channel_rdma_readv(QIOChannel *ioc, | 
 |                                       const struct iovec *iov, | 
 |                                       size_t niov, | 
 |                                       int **fds, | 
 |                                       size_t *nfds, | 
 |                                       int flags, | 
 |                                       Error **errp) | 
 | { | 
 |     QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc); | 
 |     RDMAContext *rdma; | 
 |     RDMAControlHeader head; | 
 |     int ret; | 
 |     ssize_t done = 0; | 
 |     size_t len; | 
 |  | 
 |     RCU_READ_LOCK_GUARD(); | 
 |     rdma = qatomic_rcu_read(&rioc->rdmain); | 
 |  | 
 |     if (!rdma) { | 
 |         error_setg(errp, "RDMA control channel input is not set"); | 
 |         return -1; | 
 |     } | 
 |  | 
 |     if (rdma->errored) { | 
 |         error_setg(errp, | 
 |                    "RDMA is in an error state waiting migration to abort!"); | 
 |         return -1; | 
 |     } | 
 |  | 
 |     for (int i = 0; i < niov; i++) { | 
 |         size_t want = iov[i].iov_len; | 
 |         uint8_t *data = (void *)iov[i].iov_base; | 
 |  | 
 |         /* | 
 |          * First, we hold on to the last SEND message we | 
 |          * were given and dish out the bytes until we run | 
 |          * out of bytes. | 
 |          */ | 
 |         len = qemu_rdma_fill(rdma, data, want, 0); | 
 |         done += len; | 
 |         want -= len; | 
 |         /* Got what we needed, so go to next iovec */ | 
 |         if (want == 0) { | 
 |             continue; | 
 |         } | 
 |  | 
 |         /* If we got any data so far, then don't wait | 
 |          * for more, just return what we have */ | 
 |         if (done > 0) { | 
 |             break; | 
 |         } | 
 |  | 
 |  | 
 |         /* We've got nothing at all, so lets wait for | 
 |          * more to arrive | 
 |          */ | 
 |         ret = qemu_rdma_exchange_recv(rdma, &head, RDMA_CONTROL_QEMU_FILE, | 
 |                                       errp); | 
 |  | 
 |         if (ret < 0) { | 
 |             rdma->errored = true; | 
 |             return -1; | 
 |         } | 
 |  | 
 |         /* | 
 |          * SEND was received with new bytes, now try again. | 
 |          */ | 
 |         len = qemu_rdma_fill(rdma, data, want, 0); | 
 |         done += len; | 
 |         want -= len; | 
 |  | 
 |         /* Still didn't get enough, so lets just return */ | 
 |         if (want) { | 
 |             if (done == 0) { | 
 |                 return QIO_CHANNEL_ERR_BLOCK; | 
 |             } else { | 
 |                 break; | 
 |             } | 
 |         } | 
 |     } | 
 |     return done; | 
 | } | 
 |  | 
 | /* | 
 |  * Block until all the outstanding chunks have been delivered by the hardware. | 
 |  */ | 
 | static int qemu_rdma_drain_cq(RDMAContext *rdma) | 
 | { | 
 |     Error *err = NULL; | 
 |  | 
 |     if (qemu_rdma_write_flush(rdma, &err) < 0) { | 
 |         error_report_err(err); | 
 |         return -1; | 
 |     } | 
 |  | 
 |     while (rdma->nb_sent) { | 
 |         if (qemu_rdma_block_for_wrid(rdma, RDMA_WRID_RDMA_WRITE, NULL) < 0) { | 
 |             error_report("rdma migration: complete polling error!"); | 
 |             return -1; | 
 |         } | 
 |     } | 
 |  | 
 |     qemu_rdma_unregister_waiting(rdma); | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 |  | 
 | static int qio_channel_rdma_set_blocking(QIOChannel *ioc, | 
 |                                          bool blocking, | 
 |                                          Error **errp) | 
 | { | 
 |     QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc); | 
 |     /* XXX we should make readv/writev actually honour this :-) */ | 
 |     rioc->blocking = blocking; | 
 |     return 0; | 
 | } | 
 |  | 
 |  | 
 | typedef struct QIOChannelRDMASource QIOChannelRDMASource; | 
 | struct QIOChannelRDMASource { | 
 |     GSource parent; | 
 |     QIOChannelRDMA *rioc; | 
 |     GIOCondition condition; | 
 | }; | 
 |  | 
 | static gboolean | 
 | qio_channel_rdma_source_prepare(GSource *source, | 
 |                                 gint *timeout) | 
 | { | 
 |     QIOChannelRDMASource *rsource = (QIOChannelRDMASource *)source; | 
 |     RDMAContext *rdma; | 
 |     GIOCondition cond = 0; | 
 |     *timeout = -1; | 
 |  | 
 |     RCU_READ_LOCK_GUARD(); | 
 |     if (rsource->condition == G_IO_IN) { | 
 |         rdma = qatomic_rcu_read(&rsource->rioc->rdmain); | 
 |     } else { | 
 |         rdma = qatomic_rcu_read(&rsource->rioc->rdmaout); | 
 |     } | 
 |  | 
 |     if (!rdma) { | 
 |         error_report("RDMAContext is NULL when prepare Gsource"); | 
 |         return FALSE; | 
 |     } | 
 |  | 
 |     if (rdma->wr_data[0].control_len) { | 
 |         cond |= G_IO_IN; | 
 |     } | 
 |     cond |= G_IO_OUT; | 
 |  | 
 |     return cond & rsource->condition; | 
 | } | 
 |  | 
 | static gboolean | 
 | qio_channel_rdma_source_check(GSource *source) | 
 | { | 
 |     QIOChannelRDMASource *rsource = (QIOChannelRDMASource *)source; | 
 |     RDMAContext *rdma; | 
 |     GIOCondition cond = 0; | 
 |  | 
 |     RCU_READ_LOCK_GUARD(); | 
 |     if (rsource->condition == G_IO_IN) { | 
 |         rdma = qatomic_rcu_read(&rsource->rioc->rdmain); | 
 |     } else { | 
 |         rdma = qatomic_rcu_read(&rsource->rioc->rdmaout); | 
 |     } | 
 |  | 
 |     if (!rdma) { | 
 |         error_report("RDMAContext is NULL when check Gsource"); | 
 |         return FALSE; | 
 |     } | 
 |  | 
 |     if (rdma->wr_data[0].control_len) { | 
 |         cond |= G_IO_IN; | 
 |     } | 
 |     cond |= G_IO_OUT; | 
 |  | 
 |     return cond & rsource->condition; | 
 | } | 
 |  | 
 | static gboolean | 
 | qio_channel_rdma_source_dispatch(GSource *source, | 
 |                                  GSourceFunc callback, | 
 |                                  gpointer user_data) | 
 | { | 
 |     QIOChannelFunc func = (QIOChannelFunc)callback; | 
 |     QIOChannelRDMASource *rsource = (QIOChannelRDMASource *)source; | 
 |     RDMAContext *rdma; | 
 |     GIOCondition cond = 0; | 
 |  | 
 |     RCU_READ_LOCK_GUARD(); | 
 |     if (rsource->condition == G_IO_IN) { | 
 |         rdma = qatomic_rcu_read(&rsource->rioc->rdmain); | 
 |     } else { | 
 |         rdma = qatomic_rcu_read(&rsource->rioc->rdmaout); | 
 |     } | 
 |  | 
 |     if (!rdma) { | 
 |         error_report("RDMAContext is NULL when dispatch Gsource"); | 
 |         return FALSE; | 
 |     } | 
 |  | 
 |     if (rdma->wr_data[0].control_len) { | 
 |         cond |= G_IO_IN; | 
 |     } | 
 |     cond |= G_IO_OUT; | 
 |  | 
 |     return (*func)(QIO_CHANNEL(rsource->rioc), | 
 |                    (cond & rsource->condition), | 
 |                    user_data); | 
 | } | 
 |  | 
 | static void | 
 | qio_channel_rdma_source_finalize(GSource *source) | 
 | { | 
 |     QIOChannelRDMASource *ssource = (QIOChannelRDMASource *)source; | 
 |  | 
 |     object_unref(OBJECT(ssource->rioc)); | 
 | } | 
 |  | 
 | static GSourceFuncs qio_channel_rdma_source_funcs = { | 
 |     qio_channel_rdma_source_prepare, | 
 |     qio_channel_rdma_source_check, | 
 |     qio_channel_rdma_source_dispatch, | 
 |     qio_channel_rdma_source_finalize | 
 | }; | 
 |  | 
 | static GSource *qio_channel_rdma_create_watch(QIOChannel *ioc, | 
 |                                               GIOCondition condition) | 
 | { | 
 |     QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc); | 
 |     QIOChannelRDMASource *ssource; | 
 |     GSource *source; | 
 |  | 
 |     source = g_source_new(&qio_channel_rdma_source_funcs, | 
 |                           sizeof(QIOChannelRDMASource)); | 
 |     ssource = (QIOChannelRDMASource *)source; | 
 |  | 
 |     ssource->rioc = rioc; | 
 |     object_ref(OBJECT(rioc)); | 
 |  | 
 |     ssource->condition = condition; | 
 |  | 
 |     return source; | 
 | } | 
 |  | 
 | static void qio_channel_rdma_set_aio_fd_handler(QIOChannel *ioc, | 
 |                                                 AioContext *read_ctx, | 
 |                                                 IOHandler *io_read, | 
 |                                                 AioContext *write_ctx, | 
 |                                                 IOHandler *io_write, | 
 |                                                 void *opaque) | 
 | { | 
 |     QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc); | 
 |     if (io_read) { | 
 |         aio_set_fd_handler(read_ctx, rioc->rdmain->recv_comp_channel->fd, | 
 |                            io_read, io_write, NULL, NULL, opaque); | 
 |         aio_set_fd_handler(read_ctx, rioc->rdmain->send_comp_channel->fd, | 
 |                            io_read, io_write, NULL, NULL, opaque); | 
 |     } else { | 
 |         aio_set_fd_handler(write_ctx, rioc->rdmaout->recv_comp_channel->fd, | 
 |                            io_read, io_write, NULL, NULL, opaque); | 
 |         aio_set_fd_handler(write_ctx, rioc->rdmaout->send_comp_channel->fd, | 
 |                            io_read, io_write, NULL, NULL, opaque); | 
 |     } | 
 | } | 
 |  | 
 | struct rdma_close_rcu { | 
 |     struct rcu_head rcu; | 
 |     RDMAContext *rdmain; | 
 |     RDMAContext *rdmaout; | 
 | }; | 
 |  | 
 | /* callback from qio_channel_rdma_close via call_rcu */ | 
 | static void qio_channel_rdma_close_rcu(struct rdma_close_rcu *rcu) | 
 | { | 
 |     if (rcu->rdmain) { | 
 |         qemu_rdma_cleanup(rcu->rdmain); | 
 |     } | 
 |  | 
 |     if (rcu->rdmaout) { | 
 |         qemu_rdma_cleanup(rcu->rdmaout); | 
 |     } | 
 |  | 
 |     g_free(rcu->rdmain); | 
 |     g_free(rcu->rdmaout); | 
 |     g_free(rcu); | 
 | } | 
 |  | 
 | static int qio_channel_rdma_close(QIOChannel *ioc, | 
 |                                   Error **errp) | 
 | { | 
 |     QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc); | 
 |     RDMAContext *rdmain, *rdmaout; | 
 |     struct rdma_close_rcu *rcu = g_new(struct rdma_close_rcu, 1); | 
 |  | 
 |     trace_qemu_rdma_close(); | 
 |  | 
 |     rdmain = rioc->rdmain; | 
 |     if (rdmain) { | 
 |         qatomic_rcu_set(&rioc->rdmain, NULL); | 
 |     } | 
 |  | 
 |     rdmaout = rioc->rdmaout; | 
 |     if (rdmaout) { | 
 |         qatomic_rcu_set(&rioc->rdmaout, NULL); | 
 |     } | 
 |  | 
 |     rcu->rdmain = rdmain; | 
 |     rcu->rdmaout = rdmaout; | 
 |     call_rcu(rcu, qio_channel_rdma_close_rcu, rcu); | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | static int | 
 | qio_channel_rdma_shutdown(QIOChannel *ioc, | 
 |                             QIOChannelShutdown how, | 
 |                             Error **errp) | 
 | { | 
 |     QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(ioc); | 
 |     RDMAContext *rdmain, *rdmaout; | 
 |  | 
 |     RCU_READ_LOCK_GUARD(); | 
 |  | 
 |     rdmain = qatomic_rcu_read(&rioc->rdmain); | 
 |     rdmaout = qatomic_rcu_read(&rioc->rdmain); | 
 |  | 
 |     switch (how) { | 
 |     case QIO_CHANNEL_SHUTDOWN_READ: | 
 |         if (rdmain) { | 
 |             rdmain->errored = true; | 
 |         } | 
 |         break; | 
 |     case QIO_CHANNEL_SHUTDOWN_WRITE: | 
 |         if (rdmaout) { | 
 |             rdmaout->errored = true; | 
 |         } | 
 |         break; | 
 |     case QIO_CHANNEL_SHUTDOWN_BOTH: | 
 |     default: | 
 |         if (rdmain) { | 
 |             rdmain->errored = true; | 
 |         } | 
 |         if (rdmaout) { | 
 |             rdmaout->errored = true; | 
 |         } | 
 |         break; | 
 |     } | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Parameters: | 
 |  *    @offset == 0 : | 
 |  *        This means that 'block_offset' is a full virtual address that does not | 
 |  *        belong to a RAMBlock of the virtual machine and instead | 
 |  *        represents a private malloc'd memory area that the caller wishes to | 
 |  *        transfer. | 
 |  * | 
 |  *    @offset != 0 : | 
 |  *        Offset is an offset to be added to block_offset and used | 
 |  *        to also lookup the corresponding RAMBlock. | 
 |  * | 
 |  *    @size : Number of bytes to transfer | 
 |  * | 
 |  *    @pages_sent : User-specificed pointer to indicate how many pages were | 
 |  *                  sent. Usually, this will not be more than a few bytes of | 
 |  *                  the protocol because most transfers are sent asynchronously. | 
 |  */ | 
 | static int qemu_rdma_save_page(QEMUFile *f, ram_addr_t block_offset, | 
 |                                ram_addr_t offset, size_t size) | 
 | { | 
 |     QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f)); | 
 |     Error *err = NULL; | 
 |     RDMAContext *rdma; | 
 |     int ret; | 
 |  | 
 |     RCU_READ_LOCK_GUARD(); | 
 |     rdma = qatomic_rcu_read(&rioc->rdmaout); | 
 |  | 
 |     if (!rdma) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     if (rdma_errored(rdma)) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     qemu_fflush(f); | 
 |  | 
 |     /* | 
 |      * Add this page to the current 'chunk'. If the chunk | 
 |      * is full, or the page doesn't belong to the current chunk, | 
 |      * an actual RDMA write will occur and a new chunk will be formed. | 
 |      */ | 
 |     ret = qemu_rdma_write(rdma, block_offset, offset, size, &err); | 
 |     if (ret < 0) { | 
 |         error_report_err(err); | 
 |         goto err; | 
 |     } | 
 |  | 
 |     /* | 
 |      * Drain the Completion Queue if possible, but do not block, | 
 |      * just poll. | 
 |      * | 
 |      * If nothing to poll, the end of the iteration will do this | 
 |      * again to make sure we don't overflow the request queue. | 
 |      */ | 
 |     while (1) { | 
 |         uint64_t wr_id, wr_id_in; | 
 |         ret = qemu_rdma_poll(rdma, rdma->recv_cq, &wr_id_in, NULL); | 
 |  | 
 |         if (ret < 0) { | 
 |             error_report("rdma migration: polling error"); | 
 |             goto err; | 
 |         } | 
 |  | 
 |         wr_id = wr_id_in & RDMA_WRID_TYPE_MASK; | 
 |  | 
 |         if (wr_id == RDMA_WRID_NONE) { | 
 |             break; | 
 |         } | 
 |     } | 
 |  | 
 |     while (1) { | 
 |         uint64_t wr_id, wr_id_in; | 
 |         ret = qemu_rdma_poll(rdma, rdma->send_cq, &wr_id_in, NULL); | 
 |  | 
 |         if (ret < 0) { | 
 |             error_report("rdma migration: polling error"); | 
 |             goto err; | 
 |         } | 
 |  | 
 |         wr_id = wr_id_in & RDMA_WRID_TYPE_MASK; | 
 |  | 
 |         if (wr_id == RDMA_WRID_NONE) { | 
 |             break; | 
 |         } | 
 |     } | 
 |  | 
 |     return RAM_SAVE_CONTROL_DELAYED; | 
 |  | 
 | err: | 
 |     rdma->errored = true; | 
 |     return -1; | 
 | } | 
 |  | 
 | int rdma_control_save_page(QEMUFile *f, ram_addr_t block_offset, | 
 |                            ram_addr_t offset, size_t size) | 
 | { | 
 |     if (!migrate_rdma() || migration_in_postcopy()) { | 
 |         return RAM_SAVE_CONTROL_NOT_SUPP; | 
 |     } | 
 |  | 
 |     int ret = qemu_rdma_save_page(f, block_offset, offset, size); | 
 |  | 
 |     if (ret != RAM_SAVE_CONTROL_DELAYED && | 
 |         ret != RAM_SAVE_CONTROL_NOT_SUPP) { | 
 |         if (ret < 0) { | 
 |             qemu_file_set_error(f, ret); | 
 |         } | 
 |     } | 
 |     return ret; | 
 | } | 
 |  | 
 | static void rdma_accept_incoming_migration(void *opaque); | 
 |  | 
 | static void rdma_cm_poll_handler(void *opaque) | 
 | { | 
 |     RDMAContext *rdma = opaque; | 
 |     struct rdma_cm_event *cm_event; | 
 |     MigrationIncomingState *mis = migration_incoming_get_current(); | 
 |  | 
 |     if (rdma_get_cm_event(rdma->channel, &cm_event) < 0) { | 
 |         error_report("get_cm_event failed %d", errno); | 
 |         return; | 
 |     } | 
 |  | 
 |     if (cm_event->event == RDMA_CM_EVENT_DISCONNECTED || | 
 |         cm_event->event == RDMA_CM_EVENT_DEVICE_REMOVAL) { | 
 |         if (!rdma->errored && | 
 |             migration_incoming_get_current()->state != | 
 |               MIGRATION_STATUS_COMPLETED) { | 
 |             error_report("receive cm event, cm event is %d", cm_event->event); | 
 |             rdma->errored = true; | 
 |             if (rdma->return_path) { | 
 |                 rdma->return_path->errored = true; | 
 |             } | 
 |         } | 
 |         rdma_ack_cm_event(cm_event); | 
 |         if (mis->loadvm_co) { | 
 |             qemu_coroutine_enter(mis->loadvm_co); | 
 |         } | 
 |         return; | 
 |     } | 
 |     rdma_ack_cm_event(cm_event); | 
 | } | 
 |  | 
 | static int qemu_rdma_accept(RDMAContext *rdma) | 
 | { | 
 |     Error *err = NULL; | 
 |     RDMACapabilities cap; | 
 |     struct rdma_conn_param conn_param = { | 
 |                                             .responder_resources = 2, | 
 |                                             .private_data = &cap, | 
 |                                             .private_data_len = sizeof(cap), | 
 |                                          }; | 
 |     RDMAContext *rdma_return_path = NULL; | 
 |     g_autoptr(InetSocketAddress) isock = g_new0(InetSocketAddress, 1); | 
 |     struct rdma_cm_event *cm_event; | 
 |     struct ibv_context *verbs; | 
 |     int ret; | 
 |  | 
 |     ret = rdma_get_cm_event(rdma->channel, &cm_event); | 
 |     if (ret < 0) { | 
 |         goto err_rdma_dest_wait; | 
 |     } | 
 |  | 
 |     if (cm_event->event != RDMA_CM_EVENT_CONNECT_REQUEST) { | 
 |         rdma_ack_cm_event(cm_event); | 
 |         goto err_rdma_dest_wait; | 
 |     } | 
 |  | 
 |     isock->host = g_strdup(rdma->host); | 
 |     isock->port = g_strdup_printf("%d", rdma->port); | 
 |  | 
 |     /* | 
 |      * initialize the RDMAContext for return path for postcopy after first | 
 |      * connection request reached. | 
 |      */ | 
 |     if ((migrate_postcopy() || migrate_return_path()) | 
 |         && !rdma->is_return_path) { | 
 |         rdma_return_path = qemu_rdma_data_init(isock, NULL); | 
 |         if (rdma_return_path == NULL) { | 
 |             rdma_ack_cm_event(cm_event); | 
 |             goto err_rdma_dest_wait; | 
 |         } | 
 |  | 
 |         qemu_rdma_return_path_dest_init(rdma_return_path, rdma); | 
 |     } | 
 |  | 
 |     memcpy(&cap, cm_event->param.conn.private_data, sizeof(cap)); | 
 |  | 
 |     network_to_caps(&cap); | 
 |  | 
 |     if (cap.version < 1 || cap.version > RDMA_CONTROL_VERSION_CURRENT) { | 
 |         error_report("Unknown source RDMA version: %d, bailing...", | 
 |                      cap.version); | 
 |         rdma_ack_cm_event(cm_event); | 
 |         goto err_rdma_dest_wait; | 
 |     } | 
 |  | 
 |     /* | 
 |      * Respond with only the capabilities this version of QEMU knows about. | 
 |      */ | 
 |     cap.flags &= known_capabilities; | 
 |  | 
 |     /* | 
 |      * Enable the ones that we do know about. | 
 |      * Add other checks here as new ones are introduced. | 
 |      */ | 
 |     if (cap.flags & RDMA_CAPABILITY_PIN_ALL) { | 
 |         rdma->pin_all = true; | 
 |     } | 
 |  | 
 |     rdma->cm_id = cm_event->id; | 
 |     verbs = cm_event->id->verbs; | 
 |  | 
 |     rdma_ack_cm_event(cm_event); | 
 |  | 
 |     trace_qemu_rdma_accept_pin_state(rdma->pin_all); | 
 |  | 
 |     caps_to_network(&cap); | 
 |  | 
 |     trace_qemu_rdma_accept_pin_verbsc(verbs); | 
 |  | 
 |     if (!rdma->verbs) { | 
 |         rdma->verbs = verbs; | 
 |     } else if (rdma->verbs != verbs) { | 
 |         error_report("ibv context not matching %p, %p!", rdma->verbs, | 
 |                      verbs); | 
 |         goto err_rdma_dest_wait; | 
 |     } | 
 |  | 
 |     qemu_rdma_dump_id("dest_init", verbs); | 
 |  | 
 |     ret = qemu_rdma_alloc_pd_cq(rdma, &err); | 
 |     if (ret < 0) { | 
 |         error_report_err(err); | 
 |         goto err_rdma_dest_wait; | 
 |     } | 
 |  | 
 |     ret = qemu_rdma_alloc_qp(rdma); | 
 |     if (ret < 0) { | 
 |         error_report("rdma migration: error allocating qp!"); | 
 |         goto err_rdma_dest_wait; | 
 |     } | 
 |  | 
 |     qemu_rdma_init_ram_blocks(rdma); | 
 |  | 
 |     for (int i = 0; i < RDMA_WRID_MAX; i++) { | 
 |         ret = qemu_rdma_reg_control(rdma, i); | 
 |         if (ret < 0) { | 
 |             error_report("rdma: error registering %d control", i); | 
 |             goto err_rdma_dest_wait; | 
 |         } | 
 |     } | 
 |  | 
 |     /* Accept the second connection request for return path */ | 
 |     if ((migrate_postcopy() || migrate_return_path()) | 
 |         && !rdma->is_return_path) { | 
 |         qemu_set_fd_handler(rdma->channel->fd, rdma_accept_incoming_migration, | 
 |                             NULL, | 
 |                             (void *)(intptr_t)rdma->return_path); | 
 |     } else { | 
 |         qemu_set_fd_handler(rdma->channel->fd, rdma_cm_poll_handler, | 
 |                             NULL, rdma); | 
 |     } | 
 |  | 
 |     ret = rdma_accept(rdma->cm_id, &conn_param); | 
 |     if (ret < 0) { | 
 |         error_report("rdma_accept failed"); | 
 |         goto err_rdma_dest_wait; | 
 |     } | 
 |  | 
 |     ret = rdma_get_cm_event(rdma->channel, &cm_event); | 
 |     if (ret < 0) { | 
 |         error_report("rdma_accept get_cm_event failed"); | 
 |         goto err_rdma_dest_wait; | 
 |     } | 
 |  | 
 |     if (cm_event->event != RDMA_CM_EVENT_ESTABLISHED) { | 
 |         error_report("rdma_accept not event established"); | 
 |         rdma_ack_cm_event(cm_event); | 
 |         goto err_rdma_dest_wait; | 
 |     } | 
 |  | 
 |     rdma_ack_cm_event(cm_event); | 
 |     rdma->connected = true; | 
 |  | 
 |     ret = qemu_rdma_post_recv_control(rdma, RDMA_WRID_READY, &err); | 
 |     if (ret < 0) { | 
 |         error_report_err(err); | 
 |         goto err_rdma_dest_wait; | 
 |     } | 
 |  | 
 |     qemu_rdma_dump_gid("dest_connect", rdma->cm_id); | 
 |  | 
 |     return 0; | 
 |  | 
 | err_rdma_dest_wait: | 
 |     rdma->errored = true; | 
 |     qemu_rdma_cleanup(rdma); | 
 |     g_free(rdma_return_path); | 
 |     return -1; | 
 | } | 
 |  | 
 | static int dest_ram_sort_func(const void *a, const void *b) | 
 | { | 
 |     unsigned int a_index = ((const RDMALocalBlock *)a)->src_index; | 
 |     unsigned int b_index = ((const RDMALocalBlock *)b)->src_index; | 
 |  | 
 |     return (a_index < b_index) ? -1 : (a_index != b_index); | 
 | } | 
 |  | 
 | /* | 
 |  * During each iteration of the migration, we listen for instructions | 
 |  * by the source VM to perform dynamic page registrations before they | 
 |  * can perform RDMA operations. | 
 |  * | 
 |  * We respond with the 'rkey'. | 
 |  * | 
 |  * Keep doing this until the source tells us to stop. | 
 |  */ | 
 | int rdma_registration_handle(QEMUFile *f) | 
 | { | 
 |     RDMAControlHeader reg_resp = { .len = sizeof(RDMARegisterResult), | 
 |                                .type = RDMA_CONTROL_REGISTER_RESULT, | 
 |                                .repeat = 0, | 
 |                              }; | 
 |     RDMAControlHeader unreg_resp = { .len = 0, | 
 |                                .type = RDMA_CONTROL_UNREGISTER_FINISHED, | 
 |                                .repeat = 0, | 
 |                              }; | 
 |     RDMAControlHeader blocks = { .type = RDMA_CONTROL_RAM_BLOCKS_RESULT, | 
 |                                  .repeat = 1 }; | 
 |     QIOChannelRDMA *rioc; | 
 |     Error *err = NULL; | 
 |     RDMAContext *rdma; | 
 |     RDMALocalBlocks *local; | 
 |     RDMAControlHeader head; | 
 |     RDMARegister *reg, *registers; | 
 |     RDMACompress *comp; | 
 |     RDMARegisterResult *reg_result; | 
 |     static RDMARegisterResult results[RDMA_CONTROL_MAX_COMMANDS_PER_MESSAGE]; | 
 |     RDMALocalBlock *block; | 
 |     void *host_addr; | 
 |     int ret; | 
 |     int idx = 0; | 
 |  | 
 |     if (!migrate_rdma()) { | 
 |         return 0; | 
 |     } | 
 |  | 
 |     RCU_READ_LOCK_GUARD(); | 
 |     rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f)); | 
 |     rdma = qatomic_rcu_read(&rioc->rdmain); | 
 |  | 
 |     if (!rdma) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     if (rdma_errored(rdma)) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     local = &rdma->local_ram_blocks; | 
 |     do { | 
 |         trace_rdma_registration_handle_wait(); | 
 |  | 
 |         ret = qemu_rdma_exchange_recv(rdma, &head, RDMA_CONTROL_NONE, &err); | 
 |  | 
 |         if (ret < 0) { | 
 |             error_report_err(err); | 
 |             break; | 
 |         } | 
 |  | 
 |         if (head.repeat > RDMA_CONTROL_MAX_COMMANDS_PER_MESSAGE) { | 
 |             error_report("rdma: Too many requests in this message (%d)." | 
 |                             "Bailing.", head.repeat); | 
 |             break; | 
 |         } | 
 |  | 
 |         switch (head.type) { | 
 |         case RDMA_CONTROL_COMPRESS: | 
 |             comp = (RDMACompress *) rdma->wr_data[idx].control_curr; | 
 |             network_to_compress(comp); | 
 |  | 
 |             trace_rdma_registration_handle_compress(comp->length, | 
 |                                                     comp->block_idx, | 
 |                                                     comp->offset); | 
 |             if (comp->block_idx >= rdma->local_ram_blocks.nb_blocks) { | 
 |                 error_report("rdma: 'compress' bad block index %u (vs %d)", | 
 |                              (unsigned int)comp->block_idx, | 
 |                              rdma->local_ram_blocks.nb_blocks); | 
 |                 goto err; | 
 |             } | 
 |             block = &(rdma->local_ram_blocks.block[comp->block_idx]); | 
 |  | 
 |             host_addr = block->local_host_addr + | 
 |                             (comp->offset - block->offset); | 
 |             if (comp->value) { | 
 |                 error_report("rdma: Zero page with non-zero (%d) value", | 
 |                              comp->value); | 
 |                 goto err; | 
 |             } | 
 |             ram_handle_zero(host_addr, comp->length); | 
 |             break; | 
 |  | 
 |         case RDMA_CONTROL_REGISTER_FINISHED: | 
 |             trace_rdma_registration_handle_finished(); | 
 |             return 0; | 
 |  | 
 |         case RDMA_CONTROL_RAM_BLOCKS_REQUEST: | 
 |             trace_rdma_registration_handle_ram_blocks(); | 
 |  | 
 |             /* Sort our local RAM Block list so it's the same as the source, | 
 |              * we can do this since we've filled in a src_index in the list | 
 |              * as we received the RAMBlock list earlier. | 
 |              */ | 
 |             qsort(rdma->local_ram_blocks.block, | 
 |                   rdma->local_ram_blocks.nb_blocks, | 
 |                   sizeof(RDMALocalBlock), dest_ram_sort_func); | 
 |             for (int i = 0; i < local->nb_blocks; i++) { | 
 |                 local->block[i].index = i; | 
 |             } | 
 |  | 
 |             if (rdma->pin_all) { | 
 |                 ret = qemu_rdma_reg_whole_ram_blocks(rdma, &err); | 
 |                 if (ret < 0) { | 
 |                     error_report_err(err); | 
 |                     goto err; | 
 |                 } | 
 |             } | 
 |  | 
 |             /* | 
 |              * Dest uses this to prepare to transmit the RAMBlock descriptions | 
 |              * to the source VM after connection setup. | 
 |              * Both sides use the "remote" structure to communicate and update | 
 |              * their "local" descriptions with what was sent. | 
 |              */ | 
 |             for (int i = 0; i < local->nb_blocks; i++) { | 
 |                 rdma->dest_blocks[i].remote_host_addr = | 
 |                     (uintptr_t)(local->block[i].local_host_addr); | 
 |  | 
 |                 if (rdma->pin_all) { | 
 |                     rdma->dest_blocks[i].remote_rkey = local->block[i].mr->rkey; | 
 |                 } | 
 |  | 
 |                 rdma->dest_blocks[i].offset = local->block[i].offset; | 
 |                 rdma->dest_blocks[i].length = local->block[i].length; | 
 |  | 
 |                 dest_block_to_network(&rdma->dest_blocks[i]); | 
 |                 trace_rdma_registration_handle_ram_blocks_loop( | 
 |                     local->block[i].block_name, | 
 |                     local->block[i].offset, | 
 |                     local->block[i].length, | 
 |                     local->block[i].local_host_addr, | 
 |                     local->block[i].src_index); | 
 |             } | 
 |  | 
 |             blocks.len = rdma->local_ram_blocks.nb_blocks | 
 |                                                 * sizeof(RDMADestBlock); | 
 |  | 
 |  | 
 |             ret = qemu_rdma_post_send_control(rdma, | 
 |                                     (uint8_t *) rdma->dest_blocks, &blocks, | 
 |                                     &err); | 
 |  | 
 |             if (ret < 0) { | 
 |                 error_report_err(err); | 
 |                 goto err; | 
 |             } | 
 |  | 
 |             break; | 
 |         case RDMA_CONTROL_REGISTER_REQUEST: | 
 |             trace_rdma_registration_handle_register(head.repeat); | 
 |  | 
 |             reg_resp.repeat = head.repeat; | 
 |             registers = (RDMARegister *) rdma->wr_data[idx].control_curr; | 
 |  | 
 |             for (int count = 0; count < head.repeat; count++) { | 
 |                 uint64_t chunk; | 
 |                 uint8_t *chunk_start, *chunk_end; | 
 |  | 
 |                 reg = ®isters[count]; | 
 |                 network_to_register(reg); | 
 |  | 
 |                 reg_result = &results[count]; | 
 |  | 
 |                 trace_rdma_registration_handle_register_loop(count, | 
 |                          reg->current_index, reg->key.current_addr, reg->chunks); | 
 |  | 
 |                 if (reg->current_index >= rdma->local_ram_blocks.nb_blocks) { | 
 |                     error_report("rdma: 'register' bad block index %u (vs %d)", | 
 |                                  (unsigned int)reg->current_index, | 
 |                                  rdma->local_ram_blocks.nb_blocks); | 
 |                     goto err; | 
 |                 } | 
 |                 block = &(rdma->local_ram_blocks.block[reg->current_index]); | 
 |                 if (block->is_ram_block) { | 
 |                     if (block->offset > reg->key.current_addr) { | 
 |                         error_report("rdma: bad register address for block %s" | 
 |                             " offset: %" PRIx64 " current_addr: %" PRIx64, | 
 |                             block->block_name, block->offset, | 
 |                             reg->key.current_addr); | 
 |                         goto err; | 
 |                     } | 
 |                     host_addr = (block->local_host_addr + | 
 |                                 (reg->key.current_addr - block->offset)); | 
 |                     chunk = ram_chunk_index(block->local_host_addr, | 
 |                                             (uint8_t *) host_addr); | 
 |                 } else { | 
 |                     chunk = reg->key.chunk; | 
 |                     host_addr = block->local_host_addr + | 
 |                         (reg->key.chunk * (1UL << RDMA_REG_CHUNK_SHIFT)); | 
 |                     /* Check for particularly bad chunk value */ | 
 |                     if (host_addr < (void *)block->local_host_addr) { | 
 |                         error_report("rdma: bad chunk for block %s" | 
 |                             " chunk: %" PRIx64, | 
 |                             block->block_name, reg->key.chunk); | 
 |                         goto err; | 
 |                     } | 
 |                 } | 
 |                 chunk_start = ram_chunk_start(block, chunk); | 
 |                 chunk_end = ram_chunk_end(block, chunk + reg->chunks); | 
 |                 /* avoid "-Waddress-of-packed-member" warning */ | 
 |                 uint32_t tmp_rkey = 0; | 
 |                 if (qemu_rdma_register_and_get_keys(rdma, block, | 
 |                             (uintptr_t)host_addr, NULL, &tmp_rkey, | 
 |                             chunk, chunk_start, chunk_end)) { | 
 |                     error_report("cannot get rkey"); | 
 |                     goto err; | 
 |                 } | 
 |                 reg_result->rkey = tmp_rkey; | 
 |  | 
 |                 reg_result->host_addr = (uintptr_t)block->local_host_addr; | 
 |  | 
 |                 trace_rdma_registration_handle_register_rkey(reg_result->rkey); | 
 |  | 
 |                 result_to_network(reg_result); | 
 |             } | 
 |  | 
 |             ret = qemu_rdma_post_send_control(rdma, | 
 |                             (uint8_t *) results, ®_resp, &err); | 
 |  | 
 |             if (ret < 0) { | 
 |                 error_report_err(err); | 
 |                 goto err; | 
 |             } | 
 |             break; | 
 |         case RDMA_CONTROL_UNREGISTER_REQUEST: | 
 |             trace_rdma_registration_handle_unregister(head.repeat); | 
 |             unreg_resp.repeat = head.repeat; | 
 |             registers = (RDMARegister *) rdma->wr_data[idx].control_curr; | 
 |  | 
 |             for (int count = 0; count < head.repeat; count++) { | 
 |                 reg = ®isters[count]; | 
 |                 network_to_register(reg); | 
 |  | 
 |                 trace_rdma_registration_handle_unregister_loop(count, | 
 |                            reg->current_index, reg->key.chunk); | 
 |  | 
 |                 block = &(rdma->local_ram_blocks.block[reg->current_index]); | 
 |  | 
 |                 ret = ibv_dereg_mr(block->pmr[reg->key.chunk]); | 
 |                 block->pmr[reg->key.chunk] = NULL; | 
 |  | 
 |                 if (ret != 0) { | 
 |                     error_report("rdma unregistration chunk failed: %s", | 
 |                                  strerror(errno)); | 
 |                     goto err; | 
 |                 } | 
 |  | 
 |                 rdma->total_registrations--; | 
 |  | 
 |                 trace_rdma_registration_handle_unregister_success(reg->key.chunk); | 
 |             } | 
 |  | 
 |             ret = qemu_rdma_post_send_control(rdma, NULL, &unreg_resp, &err); | 
 |  | 
 |             if (ret < 0) { | 
 |                 error_report_err(err); | 
 |                 goto err; | 
 |             } | 
 |             break; | 
 |         case RDMA_CONTROL_REGISTER_RESULT: | 
 |             error_report("Invalid RESULT message at dest."); | 
 |             goto err; | 
 |         default: | 
 |             error_report("Unknown control message %s", control_desc(head.type)); | 
 |             goto err; | 
 |         } | 
 |     } while (1); | 
 |  | 
 | err: | 
 |     rdma->errored = true; | 
 |     return -1; | 
 | } | 
 |  | 
 | /* Destination: | 
 |  * Called during the initial RAM load section which lists the | 
 |  * RAMBlocks by name.  This lets us know the order of the RAMBlocks on | 
 |  * the source.  We've already built our local RAMBlock list, but not | 
 |  * yet sent the list to the source. | 
 |  */ | 
 | int rdma_block_notification_handle(QEMUFile *f, const char *name) | 
 | { | 
 |     int curr; | 
 |     int found = -1; | 
 |  | 
 |     if (!migrate_rdma()) { | 
 |         return 0; | 
 |     } | 
 |  | 
 |     RCU_READ_LOCK_GUARD(); | 
 |     QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f)); | 
 |     RDMAContext *rdma = qatomic_rcu_read(&rioc->rdmain); | 
 |  | 
 |     if (!rdma) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     /* Find the matching RAMBlock in our local list */ | 
 |     for (curr = 0; curr < rdma->local_ram_blocks.nb_blocks; curr++) { | 
 |         if (!strcmp(rdma->local_ram_blocks.block[curr].block_name, name)) { | 
 |             found = curr; | 
 |             break; | 
 |         } | 
 |     } | 
 |  | 
 |     if (found == -1) { | 
 |         error_report("RAMBlock '%s' not found on destination", name); | 
 |         return -1; | 
 |     } | 
 |  | 
 |     rdma->local_ram_blocks.block[curr].src_index = rdma->next_src_index; | 
 |     trace_rdma_block_notification_handle(name, rdma->next_src_index); | 
 |     rdma->next_src_index++; | 
 |  | 
 |     return 0; | 
 | } | 
 |  | 
 | int rdma_registration_start(QEMUFile *f, uint64_t flags) | 
 | { | 
 |     if (!migrate_rdma() || migration_in_postcopy()) { | 
 |         return 0; | 
 |     } | 
 |  | 
 |     QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f)); | 
 |     RCU_READ_LOCK_GUARD(); | 
 |     RDMAContext *rdma = qatomic_rcu_read(&rioc->rdmaout); | 
 |     if (!rdma) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     if (rdma_errored(rdma)) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     trace_rdma_registration_start(flags); | 
 |     qemu_put_be64(f, RAM_SAVE_FLAG_HOOK); | 
 |     return qemu_fflush(f); | 
 | } | 
 |  | 
 | /* | 
 |  * Inform dest that dynamic registrations are done for now. | 
 |  * First, flush writes, if any. | 
 |  */ | 
 | int rdma_registration_stop(QEMUFile *f, uint64_t flags) | 
 | { | 
 |     QIOChannelRDMA *rioc; | 
 |     Error *err = NULL; | 
 |     RDMAContext *rdma; | 
 |     RDMAControlHeader head = { .len = 0, .repeat = 1 }; | 
 |     int ret; | 
 |  | 
 |     if (!migrate_rdma() || migration_in_postcopy()) { | 
 |         return 0; | 
 |     } | 
 |  | 
 |     RCU_READ_LOCK_GUARD(); | 
 |     rioc = QIO_CHANNEL_RDMA(qemu_file_get_ioc(f)); | 
 |     rdma = qatomic_rcu_read(&rioc->rdmaout); | 
 |     if (!rdma) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     if (rdma_errored(rdma)) { | 
 |         return -1; | 
 |     } | 
 |  | 
 |     qemu_fflush(f); | 
 |     ret = qemu_rdma_drain_cq(rdma); | 
 |  | 
 |     if (ret < 0) { | 
 |         goto err; | 
 |     } | 
 |  | 
 |     if (flags == RAM_CONTROL_SETUP) { | 
 |         RDMAControlHeader resp = {.type = RDMA_CONTROL_RAM_BLOCKS_RESULT }; | 
 |         RDMALocalBlocks *local = &rdma->local_ram_blocks; | 
 |         int reg_result_idx, nb_dest_blocks; | 
 |  | 
 |         head.type = RDMA_CONTROL_RAM_BLOCKS_REQUEST; | 
 |         trace_rdma_registration_stop_ram(); | 
 |  | 
 |         /* | 
 |          * Make sure that we parallelize the pinning on both sides. | 
 |          * For very large guests, doing this serially takes a really | 
 |          * long time, so we have to 'interleave' the pinning locally | 
 |          * with the control messages by performing the pinning on this | 
 |          * side before we receive the control response from the other | 
 |          * side that the pinning has completed. | 
 |          */ | 
 |         ret = qemu_rdma_exchange_send(rdma, &head, NULL, &resp, | 
 |                     ®_result_idx, rdma->pin_all ? | 
 |                     qemu_rdma_reg_whole_ram_blocks : NULL, | 
 |                     &err); | 
 |         if (ret < 0) { | 
 |             error_report_err(err); | 
 |             return -1; | 
 |         } | 
 |  | 
 |         nb_dest_blocks = resp.len / sizeof(RDMADestBlock); | 
 |  | 
 |         /* | 
 |          * The protocol uses two different sets of rkeys (mutually exclusive): | 
 |          * 1. One key to represent the virtual address of the entire ram block. | 
 |          *    (dynamic chunk registration disabled - pin everything with one rkey.) | 
 |          * 2. One to represent individual chunks within a ram block. | 
 |          *    (dynamic chunk registration enabled - pin individual chunks.) | 
 |          * | 
 |          * Once the capability is successfully negotiated, the destination transmits | 
 |          * the keys to use (or sends them later) including the virtual addresses | 
 |          * and then propagates the remote ram block descriptions to his local copy. | 
 |          */ | 
 |  | 
 |         if (local->nb_blocks != nb_dest_blocks) { | 
 |             error_report("ram blocks mismatch (Number of blocks %d vs %d)", | 
 |                          local->nb_blocks, nb_dest_blocks); | 
 |             error_printf("Your QEMU command line parameters are probably " | 
 |                          "not identical on both the source and destination."); | 
 |             rdma->errored = true; | 
 |             return -1; | 
 |         } | 
 |  | 
 |         qemu_rdma_move_header(rdma, reg_result_idx, &resp); | 
 |         memcpy(rdma->dest_blocks, | 
 |             rdma->wr_data[reg_result_idx].control_curr, resp.len); | 
 |         for (int i = 0; i < nb_dest_blocks; i++) { | 
 |             network_to_dest_block(&rdma->dest_blocks[i]); | 
 |  | 
 |             /* We require that the blocks are in the same order */ | 
 |             if (rdma->dest_blocks[i].length != local->block[i].length) { | 
 |                 error_report("Block %s/%d has a different length %" PRIu64 | 
 |                              "vs %" PRIu64, | 
 |                              local->block[i].block_name, i, | 
 |                              local->block[i].length, | 
 |                              rdma->dest_blocks[i].length); | 
 |                 rdma->errored = true; | 
 |                 return -1; | 
 |             } | 
 |             local->block[i].remote_host_addr = | 
 |                     rdma->dest_blocks[i].remote_host_addr; | 
 |             local->block[i].remote_rkey = rdma->dest_blocks[i].remote_rkey; | 
 |         } | 
 |     } | 
 |  | 
 |     trace_rdma_registration_stop(flags); | 
 |  | 
 |     head.type = RDMA_CONTROL_REGISTER_FINISHED; | 
 |     ret = qemu_rdma_exchange_send(rdma, &head, NULL, NULL, NULL, NULL, &err); | 
 |  | 
 |     if (ret < 0) { | 
 |         error_report_err(err); | 
 |         goto err; | 
 |     } | 
 |  | 
 |     return 0; | 
 | err: | 
 |     rdma->errored = true; | 
 |     return -1; | 
 | } | 
 |  | 
 | static void qio_channel_rdma_finalize(Object *obj) | 
 | { | 
 |     QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(obj); | 
 |     if (rioc->rdmain) { | 
 |         qemu_rdma_cleanup(rioc->rdmain); | 
 |         g_free(rioc->rdmain); | 
 |         rioc->rdmain = NULL; | 
 |     } | 
 |     if (rioc->rdmaout) { | 
 |         qemu_rdma_cleanup(rioc->rdmaout); | 
 |         g_free(rioc->rdmaout); | 
 |         rioc->rdmaout = NULL; | 
 |     } | 
 | } | 
 |  | 
 | static void qio_channel_rdma_class_init(ObjectClass *klass, | 
 |                                         void *class_data G_GNUC_UNUSED) | 
 | { | 
 |     QIOChannelClass *ioc_klass = QIO_CHANNEL_CLASS(klass); | 
 |  | 
 |     ioc_klass->io_writev = qio_channel_rdma_writev; | 
 |     ioc_klass->io_readv = qio_channel_rdma_readv; | 
 |     ioc_klass->io_set_blocking = qio_channel_rdma_set_blocking; | 
 |     ioc_klass->io_close = qio_channel_rdma_close; | 
 |     ioc_klass->io_create_watch = qio_channel_rdma_create_watch; | 
 |     ioc_klass->io_set_aio_fd_handler = qio_channel_rdma_set_aio_fd_handler; | 
 |     ioc_klass->io_shutdown = qio_channel_rdma_shutdown; | 
 | } | 
 |  | 
 | static const TypeInfo qio_channel_rdma_info = { | 
 |     .parent = TYPE_QIO_CHANNEL, | 
 |     .name = TYPE_QIO_CHANNEL_RDMA, | 
 |     .instance_size = sizeof(QIOChannelRDMA), | 
 |     .instance_finalize = qio_channel_rdma_finalize, | 
 |     .class_init = qio_channel_rdma_class_init, | 
 | }; | 
 |  | 
 | static void qio_channel_rdma_register_types(void) | 
 | { | 
 |     type_register_static(&qio_channel_rdma_info); | 
 | } | 
 |  | 
 | type_init(qio_channel_rdma_register_types); | 
 |  | 
 | static QEMUFile *rdma_new_input(RDMAContext *rdma) | 
 | { | 
 |     QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(object_new(TYPE_QIO_CHANNEL_RDMA)); | 
 |  | 
 |     rioc->file = qemu_file_new_input(QIO_CHANNEL(rioc)); | 
 |     rioc->rdmain = rdma; | 
 |     rioc->rdmaout = rdma->return_path; | 
 |  | 
 |     return rioc->file; | 
 | } | 
 |  | 
 | static QEMUFile *rdma_new_output(RDMAContext *rdma) | 
 | { | 
 |     QIOChannelRDMA *rioc = QIO_CHANNEL_RDMA(object_new(TYPE_QIO_CHANNEL_RDMA)); | 
 |  | 
 |     rioc->file = qemu_file_new_output(QIO_CHANNEL(rioc)); | 
 |     rioc->rdmaout = rdma; | 
 |     rioc->rdmain = rdma->return_path; | 
 |  | 
 |     return rioc->file; | 
 | } | 
 |  | 
 | static void rdma_accept_incoming_migration(void *opaque) | 
 | { | 
 |     RDMAContext *rdma = opaque; | 
 |     QEMUFile *f; | 
 |  | 
 |     trace_qemu_rdma_accept_incoming_migration(); | 
 |     if (qemu_rdma_accept(rdma) < 0) { | 
 |         error_report("RDMA ERROR: Migration initialization failed"); | 
 |         return; | 
 |     } | 
 |  | 
 |     trace_qemu_rdma_accept_incoming_migration_accepted(); | 
 |  | 
 |     if (rdma->is_return_path) { | 
 |         return; | 
 |     } | 
 |  | 
 |     f = rdma_new_input(rdma); | 
 |     if (f == NULL) { | 
 |         error_report("RDMA ERROR: could not open RDMA for input"); | 
 |         qemu_rdma_cleanup(rdma); | 
 |         return; | 
 |     } | 
 |  | 
 |     rdma->migration_started_on_destination = 1; | 
 |     migration_fd_process_incoming(f); | 
 | } | 
 |  | 
 | void rdma_start_incoming_migration(InetSocketAddress *host_port, | 
 |                                    Error **errp) | 
 | { | 
 |     MigrationState *s = migrate_get_current(); | 
 |     int ret; | 
 |     RDMAContext *rdma; | 
 |  | 
 |     trace_rdma_start_incoming_migration(); | 
 |  | 
 |     /* Avoid ram_block_discard_disable(), cannot change during migration. */ | 
 |     if (ram_block_discard_is_required()) { | 
 |         error_setg(errp, "RDMA: cannot disable RAM discard"); | 
 |         return; | 
 |     } | 
 |  | 
 |     rdma = qemu_rdma_data_init(host_port, errp); | 
 |     if (rdma == NULL) { | 
 |         goto err; | 
 |     } | 
 |  | 
 |     ret = qemu_rdma_dest_init(rdma, errp); | 
 |     if (ret < 0) { | 
 |         goto err; | 
 |     } | 
 |  | 
 |     trace_rdma_start_incoming_migration_after_dest_init(); | 
 |  | 
 |     ret = rdma_listen(rdma->listen_id, 5); | 
 |  | 
 |     if (ret < 0) { | 
 |         error_setg(errp, "RDMA ERROR: listening on socket!"); | 
 |         goto cleanup_rdma; | 
 |     } | 
 |  | 
 |     trace_rdma_start_incoming_migration_after_rdma_listen(); | 
 |     s->rdma_migration = true; | 
 |     qemu_set_fd_handler(rdma->channel->fd, rdma_accept_incoming_migration, | 
 |                         NULL, (void *)(intptr_t)rdma); | 
 |     return; | 
 |  | 
 | cleanup_rdma: | 
 |     qemu_rdma_cleanup(rdma); | 
 | err: | 
 |     if (rdma) { | 
 |         g_free(rdma->host); | 
 |     } | 
 |     g_free(rdma); | 
 | } | 
 |  | 
 | void rdma_start_outgoing_migration(void *opaque, | 
 |                             InetSocketAddress *host_port, Error **errp) | 
 | { | 
 |     MigrationState *s = opaque; | 
 |     RDMAContext *rdma_return_path = NULL; | 
 |     RDMAContext *rdma; | 
 |     int ret; | 
 |  | 
 |     /* Avoid ram_block_discard_disable(), cannot change during migration. */ | 
 |     if (ram_block_discard_is_required()) { | 
 |         error_setg(errp, "RDMA: cannot disable RAM discard"); | 
 |         return; | 
 |     } | 
 |  | 
 |     rdma = qemu_rdma_data_init(host_port, errp); | 
 |     if (rdma == NULL) { | 
 |         goto err; | 
 |     } | 
 |  | 
 |     ret = qemu_rdma_source_init(rdma, migrate_rdma_pin_all(), errp); | 
 |  | 
 |     if (ret < 0) { | 
 |         goto err; | 
 |     } | 
 |  | 
 |     trace_rdma_start_outgoing_migration_after_rdma_source_init(); | 
 |     ret = qemu_rdma_connect(rdma, false, errp); | 
 |  | 
 |     if (ret < 0) { | 
 |         goto err; | 
 |     } | 
 |  | 
 |     /* RDMA postcopy need a separate queue pair for return path */ | 
 |     if (migrate_postcopy() || migrate_return_path()) { | 
 |         rdma_return_path = qemu_rdma_data_init(host_port, errp); | 
 |  | 
 |         if (rdma_return_path == NULL) { | 
 |             goto return_path_err; | 
 |         } | 
 |  | 
 |         ret = qemu_rdma_source_init(rdma_return_path, | 
 |                                     migrate_rdma_pin_all(), errp); | 
 |  | 
 |         if (ret < 0) { | 
 |             goto return_path_err; | 
 |         } | 
 |  | 
 |         ret = qemu_rdma_connect(rdma_return_path, true, errp); | 
 |  | 
 |         if (ret < 0) { | 
 |             goto return_path_err; | 
 |         } | 
 |  | 
 |         rdma->return_path = rdma_return_path; | 
 |         rdma_return_path->return_path = rdma; | 
 |         rdma_return_path->is_return_path = true; | 
 |     } | 
 |  | 
 |     trace_rdma_start_outgoing_migration_after_rdma_connect(); | 
 |  | 
 |     s->to_dst_file = rdma_new_output(rdma); | 
 |     s->rdma_migration = true; | 
 |     migrate_fd_connect(s, NULL); | 
 |     return; | 
 | return_path_err: | 
 |     qemu_rdma_cleanup(rdma); | 
 | err: | 
 |     g_free(rdma); | 
 |     g_free(rdma_return_path); | 
 | } |