| /* |
| * vhost shadow virtqueue |
| * |
| * SPDX-FileCopyrightText: Red Hat, Inc. 2021 |
| * SPDX-FileContributor: Author: Eugenio PĂ©rez <eperezma@redhat.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0-or-later |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/virtio/vhost-shadow-virtqueue.h" |
| |
| #include "qemu/error-report.h" |
| #include "qapi/error.h" |
| #include "qemu/main-loop.h" |
| #include "qemu/log.h" |
| #include "qemu/memalign.h" |
| #include "linux-headers/linux/vhost.h" |
| |
| /** |
| * Validate the transport device features that both guests can use with the SVQ |
| * and SVQs can use with the device. |
| * |
| * @dev_features: The features |
| * @errp: Error pointer |
| */ |
| bool vhost_svq_valid_features(uint64_t features, Error **errp) |
| { |
| bool ok = true; |
| uint64_t svq_features = features; |
| |
| for (uint64_t b = VIRTIO_TRANSPORT_F_START; b <= VIRTIO_TRANSPORT_F_END; |
| ++b) { |
| switch (b) { |
| case VIRTIO_F_ANY_LAYOUT: |
| continue; |
| |
| case VIRTIO_F_ACCESS_PLATFORM: |
| /* SVQ trust in the host's IOMMU to translate addresses */ |
| case VIRTIO_F_VERSION_1: |
| /* SVQ trust that the guest vring is little endian */ |
| if (!(svq_features & BIT_ULL(b))) { |
| svq_features |= BIT_ULL(b); |
| ok = false; |
| } |
| continue; |
| |
| default: |
| if (svq_features & BIT_ULL(b)) { |
| svq_features &= ~BIT_ULL(b); |
| ok = false; |
| } |
| } |
| } |
| |
| if (!ok) { |
| error_setg(errp, "SVQ Invalid device feature flags, offer: 0x%"PRIx64 |
| ", ok: 0x%"PRIx64, features, svq_features); |
| } |
| return ok; |
| } |
| |
| /** |
| * Number of descriptors that the SVQ can make available from the guest. |
| * |
| * @svq: The svq |
| */ |
| static uint16_t vhost_svq_available_slots(const VhostShadowVirtqueue *svq) |
| { |
| return svq->vring.num - (svq->shadow_avail_idx - svq->shadow_used_idx); |
| } |
| |
| /** |
| * Translate addresses between the qemu's virtual address and the SVQ IOVA |
| * |
| * @svq: Shadow VirtQueue |
| * @vaddr: Translated IOVA addresses |
| * @iovec: Source qemu's VA addresses |
| * @num: Length of iovec and minimum length of vaddr |
| */ |
| static bool vhost_svq_translate_addr(const VhostShadowVirtqueue *svq, |
| hwaddr *addrs, const struct iovec *iovec, |
| size_t num) |
| { |
| if (num == 0) { |
| return true; |
| } |
| |
| for (size_t i = 0; i < num; ++i) { |
| DMAMap needle = { |
| .translated_addr = (hwaddr)(uintptr_t)iovec[i].iov_base, |
| .size = iovec[i].iov_len, |
| }; |
| Int128 needle_last, map_last; |
| size_t off; |
| |
| const DMAMap *map = vhost_iova_tree_find_iova(svq->iova_tree, &needle); |
| /* |
| * Map cannot be NULL since iova map contains all guest space and |
| * qemu already has a physical address mapped |
| */ |
| if (unlikely(!map)) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "Invalid address 0x%"HWADDR_PRIx" given by guest", |
| needle.translated_addr); |
| return false; |
| } |
| |
| off = needle.translated_addr - map->translated_addr; |
| addrs[i] = map->iova + off; |
| |
| needle_last = int128_add(int128_make64(needle.translated_addr), |
| int128_make64(iovec[i].iov_len)); |
| map_last = int128_make64(map->translated_addr + map->size); |
| if (unlikely(int128_gt(needle_last, map_last))) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "Guest buffer expands over iova range"); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| static void vhost_vring_write_descs(VhostShadowVirtqueue *svq, hwaddr *sg, |
| const struct iovec *iovec, size_t num, |
| bool more_descs, bool write) |
| { |
| uint16_t i = svq->free_head, last = svq->free_head; |
| unsigned n; |
| uint16_t flags = write ? cpu_to_le16(VRING_DESC_F_WRITE) : 0; |
| vring_desc_t *descs = svq->vring.desc; |
| |
| if (num == 0) { |
| return; |
| } |
| |
| for (n = 0; n < num; n++) { |
| if (more_descs || (n + 1 < num)) { |
| descs[i].flags = flags | cpu_to_le16(VRING_DESC_F_NEXT); |
| descs[i].next = cpu_to_le16(svq->desc_next[i]); |
| } else { |
| descs[i].flags = flags; |
| } |
| descs[i].addr = cpu_to_le64(sg[n]); |
| descs[i].len = cpu_to_le32(iovec[n].iov_len); |
| |
| last = i; |
| i = cpu_to_le16(svq->desc_next[i]); |
| } |
| |
| svq->free_head = le16_to_cpu(svq->desc_next[last]); |
| } |
| |
| static bool vhost_svq_add_split(VhostShadowVirtqueue *svq, |
| VirtQueueElement *elem, unsigned *head) |
| { |
| unsigned avail_idx; |
| vring_avail_t *avail = svq->vring.avail; |
| bool ok; |
| g_autofree hwaddr *sgs = g_new(hwaddr, MAX(elem->out_num, elem->in_num)); |
| |
| *head = svq->free_head; |
| |
| /* We need some descriptors here */ |
| if (unlikely(!elem->out_num && !elem->in_num)) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "Guest provided element with no descriptors"); |
| return false; |
| } |
| |
| ok = vhost_svq_translate_addr(svq, sgs, elem->out_sg, elem->out_num); |
| if (unlikely(!ok)) { |
| return false; |
| } |
| vhost_vring_write_descs(svq, sgs, elem->out_sg, elem->out_num, |
| elem->in_num > 0, false); |
| |
| |
| ok = vhost_svq_translate_addr(svq, sgs, elem->in_sg, elem->in_num); |
| if (unlikely(!ok)) { |
| return false; |
| } |
| |
| vhost_vring_write_descs(svq, sgs, elem->in_sg, elem->in_num, false, true); |
| |
| /* |
| * Put the entry in the available array (but don't update avail->idx until |
| * they do sync). |
| */ |
| avail_idx = svq->shadow_avail_idx & (svq->vring.num - 1); |
| avail->ring[avail_idx] = cpu_to_le16(*head); |
| svq->shadow_avail_idx++; |
| |
| /* Update the avail index after write the descriptor */ |
| smp_wmb(); |
| avail->idx = cpu_to_le16(svq->shadow_avail_idx); |
| |
| return true; |
| } |
| |
| /** |
| * Add an element to a SVQ. |
| * |
| * The caller must check that there is enough slots for the new element. It |
| * takes ownership of the element: In case of failure, it is free and the SVQ |
| * is considered broken. |
| */ |
| static bool vhost_svq_add(VhostShadowVirtqueue *svq, VirtQueueElement *elem) |
| { |
| unsigned qemu_head; |
| bool ok = vhost_svq_add_split(svq, elem, &qemu_head); |
| if (unlikely(!ok)) { |
| g_free(elem); |
| return false; |
| } |
| |
| svq->ring_id_maps[qemu_head] = elem; |
| return true; |
| } |
| |
| static void vhost_svq_kick(VhostShadowVirtqueue *svq) |
| { |
| /* |
| * We need to expose the available array entries before checking the used |
| * flags |
| */ |
| smp_mb(); |
| if (svq->vring.used->flags & VRING_USED_F_NO_NOTIFY) { |
| return; |
| } |
| |
| event_notifier_set(&svq->hdev_kick); |
| } |
| |
| /** |
| * Forward available buffers. |
| * |
| * @svq: Shadow VirtQueue |
| * |
| * Note that this function does not guarantee that all guest's available |
| * buffers are available to the device in SVQ avail ring. The guest may have |
| * exposed a GPA / GIOVA contiguous buffer, but it may not be contiguous in |
| * qemu vaddr. |
| * |
| * If that happens, guest's kick notifications will be disabled until the |
| * device uses some buffers. |
| */ |
| static void vhost_handle_guest_kick(VhostShadowVirtqueue *svq) |
| { |
| /* Clear event notifier */ |
| event_notifier_test_and_clear(&svq->svq_kick); |
| |
| /* Forward to the device as many available buffers as possible */ |
| do { |
| virtio_queue_set_notification(svq->vq, false); |
| |
| while (true) { |
| VirtQueueElement *elem; |
| bool ok; |
| |
| if (svq->next_guest_avail_elem) { |
| elem = g_steal_pointer(&svq->next_guest_avail_elem); |
| } else { |
| elem = virtqueue_pop(svq->vq, sizeof(*elem)); |
| } |
| |
| if (!elem) { |
| break; |
| } |
| |
| if (elem->out_num + elem->in_num > vhost_svq_available_slots(svq)) { |
| /* |
| * This condition is possible since a contiguous buffer in GPA |
| * does not imply a contiguous buffer in qemu's VA |
| * scatter-gather segments. If that happens, the buffer exposed |
| * to the device needs to be a chain of descriptors at this |
| * moment. |
| * |
| * SVQ cannot hold more available buffers if we are here: |
| * queue the current guest descriptor and ignore further kicks |
| * until some elements are used. |
| */ |
| svq->next_guest_avail_elem = elem; |
| return; |
| } |
| |
| ok = vhost_svq_add(svq, elem); |
| if (unlikely(!ok)) { |
| /* VQ is broken, just return and ignore any other kicks */ |
| return; |
| } |
| vhost_svq_kick(svq); |
| } |
| |
| virtio_queue_set_notification(svq->vq, true); |
| } while (!virtio_queue_empty(svq->vq)); |
| } |
| |
| /** |
| * Handle guest's kick. |
| * |
| * @n: guest kick event notifier, the one that guest set to notify svq. |
| */ |
| static void vhost_handle_guest_kick_notifier(EventNotifier *n) |
| { |
| VhostShadowVirtqueue *svq = container_of(n, VhostShadowVirtqueue, svq_kick); |
| event_notifier_test_and_clear(n); |
| vhost_handle_guest_kick(svq); |
| } |
| |
| static bool vhost_svq_more_used(VhostShadowVirtqueue *svq) |
| { |
| if (svq->last_used_idx != svq->shadow_used_idx) { |
| return true; |
| } |
| |
| svq->shadow_used_idx = cpu_to_le16(svq->vring.used->idx); |
| |
| return svq->last_used_idx != svq->shadow_used_idx; |
| } |
| |
| /** |
| * Enable vhost device calls after disable them. |
| * |
| * @svq: The svq |
| * |
| * It returns false if there are pending used buffers from the vhost device, |
| * avoiding the possible races between SVQ checking for more work and enabling |
| * callbacks. True if SVQ used vring has no more pending buffers. |
| */ |
| static bool vhost_svq_enable_notification(VhostShadowVirtqueue *svq) |
| { |
| svq->vring.avail->flags &= ~cpu_to_le16(VRING_AVAIL_F_NO_INTERRUPT); |
| /* Make sure the flag is written before the read of used_idx */ |
| smp_mb(); |
| return !vhost_svq_more_used(svq); |
| } |
| |
| static void vhost_svq_disable_notification(VhostShadowVirtqueue *svq) |
| { |
| svq->vring.avail->flags |= cpu_to_le16(VRING_AVAIL_F_NO_INTERRUPT); |
| } |
| |
| static uint16_t vhost_svq_last_desc_of_chain(const VhostShadowVirtqueue *svq, |
| uint16_t num, uint16_t i) |
| { |
| for (uint16_t j = 0; j < (num - 1); ++j) { |
| i = le16_to_cpu(svq->desc_next[i]); |
| } |
| |
| return i; |
| } |
| |
| static VirtQueueElement *vhost_svq_get_buf(VhostShadowVirtqueue *svq, |
| uint32_t *len) |
| { |
| const vring_used_t *used = svq->vring.used; |
| vring_used_elem_t used_elem; |
| uint16_t last_used, last_used_chain, num; |
| |
| if (!vhost_svq_more_used(svq)) { |
| return NULL; |
| } |
| |
| /* Only get used array entries after they have been exposed by dev */ |
| smp_rmb(); |
| last_used = svq->last_used_idx & (svq->vring.num - 1); |
| used_elem.id = le32_to_cpu(used->ring[last_used].id); |
| used_elem.len = le32_to_cpu(used->ring[last_used].len); |
| |
| svq->last_used_idx++; |
| if (unlikely(used_elem.id >= svq->vring.num)) { |
| qemu_log_mask(LOG_GUEST_ERROR, "Device %s says index %u is used", |
| svq->vdev->name, used_elem.id); |
| return NULL; |
| } |
| |
| if (unlikely(!svq->ring_id_maps[used_elem.id])) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "Device %s says index %u is used, but it was not available", |
| svq->vdev->name, used_elem.id); |
| return NULL; |
| } |
| |
| num = svq->ring_id_maps[used_elem.id]->in_num + |
| svq->ring_id_maps[used_elem.id]->out_num; |
| last_used_chain = vhost_svq_last_desc_of_chain(svq, num, used_elem.id); |
| svq->desc_next[last_used_chain] = svq->free_head; |
| svq->free_head = used_elem.id; |
| |
| *len = used_elem.len; |
| return g_steal_pointer(&svq->ring_id_maps[used_elem.id]); |
| } |
| |
| static void vhost_svq_flush(VhostShadowVirtqueue *svq, |
| bool check_for_avail_queue) |
| { |
| VirtQueue *vq = svq->vq; |
| |
| /* Forward as many used buffers as possible. */ |
| do { |
| unsigned i = 0; |
| |
| vhost_svq_disable_notification(svq); |
| while (true) { |
| uint32_t len; |
| g_autofree VirtQueueElement *elem = vhost_svq_get_buf(svq, &len); |
| if (!elem) { |
| break; |
| } |
| |
| if (unlikely(i >= svq->vring.num)) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "More than %u used buffers obtained in a %u size SVQ", |
| i, svq->vring.num); |
| virtqueue_fill(vq, elem, len, i); |
| virtqueue_flush(vq, i); |
| return; |
| } |
| virtqueue_fill(vq, elem, len, i++); |
| } |
| |
| virtqueue_flush(vq, i); |
| event_notifier_set(&svq->svq_call); |
| |
| if (check_for_avail_queue && svq->next_guest_avail_elem) { |
| /* |
| * Avail ring was full when vhost_svq_flush was called, so it's a |
| * good moment to make more descriptors available if possible. |
| */ |
| vhost_handle_guest_kick(svq); |
| } |
| } while (!vhost_svq_enable_notification(svq)); |
| } |
| |
| /** |
| * Forward used buffers. |
| * |
| * @n: hdev call event notifier, the one that device set to notify svq. |
| * |
| * Note that we are not making any buffers available in the loop, there is no |
| * way that it runs more than virtqueue size times. |
| */ |
| static void vhost_svq_handle_call(EventNotifier *n) |
| { |
| VhostShadowVirtqueue *svq = container_of(n, VhostShadowVirtqueue, |
| hdev_call); |
| event_notifier_test_and_clear(n); |
| vhost_svq_flush(svq, true); |
| } |
| |
| /** |
| * Set the call notifier for the SVQ to call the guest |
| * |
| * @svq: Shadow virtqueue |
| * @call_fd: call notifier |
| * |
| * Called on BQL context. |
| */ |
| void vhost_svq_set_svq_call_fd(VhostShadowVirtqueue *svq, int call_fd) |
| { |
| if (call_fd == VHOST_FILE_UNBIND) { |
| /* |
| * Fail event_notifier_set if called handling device call. |
| * |
| * SVQ still needs device notifications, since it needs to keep |
| * forwarding used buffers even with the unbind. |
| */ |
| memset(&svq->svq_call, 0, sizeof(svq->svq_call)); |
| } else { |
| event_notifier_init_fd(&svq->svq_call, call_fd); |
| } |
| } |
| |
| /** |
| * Get the shadow vq vring address. |
| * @svq: Shadow virtqueue |
| * @addr: Destination to store address |
| */ |
| void vhost_svq_get_vring_addr(const VhostShadowVirtqueue *svq, |
| struct vhost_vring_addr *addr) |
| { |
| addr->desc_user_addr = (uint64_t)(uintptr_t)svq->vring.desc; |
| addr->avail_user_addr = (uint64_t)(uintptr_t)svq->vring.avail; |
| addr->used_user_addr = (uint64_t)(uintptr_t)svq->vring.used; |
| } |
| |
| size_t vhost_svq_driver_area_size(const VhostShadowVirtqueue *svq) |
| { |
| size_t desc_size = sizeof(vring_desc_t) * svq->vring.num; |
| size_t avail_size = offsetof(vring_avail_t, ring) + |
| sizeof(uint16_t) * svq->vring.num; |
| |
| return ROUND_UP(desc_size + avail_size, qemu_real_host_page_size()); |
| } |
| |
| size_t vhost_svq_device_area_size(const VhostShadowVirtqueue *svq) |
| { |
| size_t used_size = offsetof(vring_used_t, ring) + |
| sizeof(vring_used_elem_t) * svq->vring.num; |
| return ROUND_UP(used_size, qemu_real_host_page_size()); |
| } |
| |
| /** |
| * Set a new file descriptor for the guest to kick the SVQ and notify for avail |
| * |
| * @svq: The svq |
| * @svq_kick_fd: The svq kick fd |
| * |
| * Note that the SVQ will never close the old file descriptor. |
| */ |
| void vhost_svq_set_svq_kick_fd(VhostShadowVirtqueue *svq, int svq_kick_fd) |
| { |
| EventNotifier *svq_kick = &svq->svq_kick; |
| bool poll_stop = VHOST_FILE_UNBIND != event_notifier_get_fd(svq_kick); |
| bool poll_start = svq_kick_fd != VHOST_FILE_UNBIND; |
| |
| if (poll_stop) { |
| event_notifier_set_handler(svq_kick, NULL); |
| } |
| |
| /* |
| * event_notifier_set_handler already checks for guest's notifications if |
| * they arrive at the new file descriptor in the switch, so there is no |
| * need to explicitly check for them. |
| */ |
| if (poll_start) { |
| event_notifier_init_fd(svq_kick, svq_kick_fd); |
| event_notifier_set(svq_kick); |
| event_notifier_set_handler(svq_kick, vhost_handle_guest_kick_notifier); |
| } |
| } |
| |
| /** |
| * Start the shadow virtqueue operation. |
| * |
| * @svq: Shadow Virtqueue |
| * @vdev: VirtIO device |
| * @vq: Virtqueue to shadow |
| */ |
| void vhost_svq_start(VhostShadowVirtqueue *svq, VirtIODevice *vdev, |
| VirtQueue *vq) |
| { |
| size_t desc_size, driver_size, device_size; |
| |
| svq->next_guest_avail_elem = NULL; |
| svq->shadow_avail_idx = 0; |
| svq->shadow_used_idx = 0; |
| svq->last_used_idx = 0; |
| svq->vdev = vdev; |
| svq->vq = vq; |
| |
| svq->vring.num = virtio_queue_get_num(vdev, virtio_get_queue_index(vq)); |
| driver_size = vhost_svq_driver_area_size(svq); |
| device_size = vhost_svq_device_area_size(svq); |
| svq->vring.desc = qemu_memalign(qemu_real_host_page_size(), driver_size); |
| desc_size = sizeof(vring_desc_t) * svq->vring.num; |
| svq->vring.avail = (void *)((char *)svq->vring.desc + desc_size); |
| memset(svq->vring.desc, 0, driver_size); |
| svq->vring.used = qemu_memalign(qemu_real_host_page_size(), device_size); |
| memset(svq->vring.used, 0, device_size); |
| svq->ring_id_maps = g_new0(VirtQueueElement *, svq->vring.num); |
| svq->desc_next = g_new0(uint16_t, svq->vring.num); |
| for (unsigned i = 0; i < svq->vring.num - 1; i++) { |
| svq->desc_next[i] = cpu_to_le16(i + 1); |
| } |
| } |
| |
| /** |
| * Stop the shadow virtqueue operation. |
| * @svq: Shadow Virtqueue |
| */ |
| void vhost_svq_stop(VhostShadowVirtqueue *svq) |
| { |
| event_notifier_set_handler(&svq->svq_kick, NULL); |
| g_autofree VirtQueueElement *next_avail_elem = NULL; |
| |
| if (!svq->vq) { |
| return; |
| } |
| |
| /* Send all pending used descriptors to guest */ |
| vhost_svq_flush(svq, false); |
| |
| for (unsigned i = 0; i < svq->vring.num; ++i) { |
| g_autofree VirtQueueElement *elem = NULL; |
| elem = g_steal_pointer(&svq->ring_id_maps[i]); |
| if (elem) { |
| virtqueue_detach_element(svq->vq, elem, 0); |
| } |
| } |
| |
| next_avail_elem = g_steal_pointer(&svq->next_guest_avail_elem); |
| if (next_avail_elem) { |
| virtqueue_detach_element(svq->vq, next_avail_elem, 0); |
| } |
| svq->vq = NULL; |
| g_free(svq->desc_next); |
| g_free(svq->ring_id_maps); |
| qemu_vfree(svq->vring.desc); |
| qemu_vfree(svq->vring.used); |
| } |
| |
| /** |
| * Creates vhost shadow virtqueue, and instructs the vhost device to use the |
| * shadow methods and file descriptors. |
| * |
| * @iova_tree: Tree to perform descriptors translations |
| * |
| * Returns the new virtqueue or NULL. |
| * |
| * In case of error, reason is reported through error_report. |
| */ |
| VhostShadowVirtqueue *vhost_svq_new(VhostIOVATree *iova_tree) |
| { |
| g_autofree VhostShadowVirtqueue *svq = g_new0(VhostShadowVirtqueue, 1); |
| int r; |
| |
| r = event_notifier_init(&svq->hdev_kick, 0); |
| if (r != 0) { |
| error_report("Couldn't create kick event notifier: %s (%d)", |
| g_strerror(errno), errno); |
| goto err_init_hdev_kick; |
| } |
| |
| r = event_notifier_init(&svq->hdev_call, 0); |
| if (r != 0) { |
| error_report("Couldn't create call event notifier: %s (%d)", |
| g_strerror(errno), errno); |
| goto err_init_hdev_call; |
| } |
| |
| event_notifier_init_fd(&svq->svq_kick, VHOST_FILE_UNBIND); |
| event_notifier_set_handler(&svq->hdev_call, vhost_svq_handle_call); |
| svq->iova_tree = iova_tree; |
| return g_steal_pointer(&svq); |
| |
| err_init_hdev_call: |
| event_notifier_cleanup(&svq->hdev_kick); |
| |
| err_init_hdev_kick: |
| return NULL; |
| } |
| |
| /** |
| * Free the resources of the shadow virtqueue. |
| * |
| * @pvq: gpointer to SVQ so it can be used by autofree functions. |
| */ |
| void vhost_svq_free(gpointer pvq) |
| { |
| VhostShadowVirtqueue *vq = pvq; |
| vhost_svq_stop(vq); |
| event_notifier_cleanup(&vq->hdev_kick); |
| event_notifier_set_handler(&vq->hdev_call, NULL); |
| event_notifier_cleanup(&vq->hdev_call); |
| g_free(vq); |
| } |