blob: f61818b42bc77cee2ab9b7a3265b7a8d1ccd9572 [file] [log] [blame]
/*
* Model of Petalogix linux reference design targeting Xilinx Spartan ml605
* board.
*
* Copyright (c) 2011 Michal Simek <monstr@monstr.eu>
* Copyright (c) 2011 PetaLogix
* Copyright (c) 2009 Edgar E. Iglesias.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "hw/sysbus.h"
#include "hw/hw.h"
#include "net/net.h"
#include "hw/block/flash.h"
#include "sysemu/sysemu.h"
#include "hw/arm/devices.h"
#include "hw/boards.h"
#include "hw/xilinx.h"
#include "sysemu/blockdev.h"
#include "hw/char/serial.h"
#include "exec/address-spaces.h"
#include "hw/ssi.h"
#include "boot.h"
#include "pic_cpu.h"
#include "hw/stream.h"
#define LMB_BRAM_SIZE (128 * 1024)
#define FLASH_SIZE (32 * 1024 * 1024)
#define BINARY_DEVICE_TREE_FILE "petalogix-ml605.dtb"
#define NUM_SPI_FLASHES 4
#define MEMORY_BASEADDR 0x50000000
#define FLASH_BASEADDR 0x86000000
#define INTC_BASEADDR 0x81800000
#define TIMER_BASEADDR 0x83c00000
#define UART16550_BASEADDR 0x83e00000
#define AXIENET_BASEADDR 0x82780000
#define AXIDMA_BASEADDR 0x84600000
static void machine_cpu_reset(MicroBlazeCPU *cpu)
{
CPUMBState *env = &cpu->env;
env->pvr.regs[10] = 0x0e000000; /* virtex 6 */
/* setup pvr to match kernel setting */
env->pvr.regs[5] |= PVR5_DCACHE_WRITEBACK_MASK;
env->pvr.regs[0] |= PVR0_USE_FPU_MASK | PVR0_ENDI;
env->pvr.regs[0] = (env->pvr.regs[0] & ~PVR0_VERSION_MASK) | (0x14 << 8);
env->pvr.regs[2] ^= PVR2_USE_FPU2_MASK;
env->pvr.regs[4] = 0xc56b8000;
env->pvr.regs[5] = 0xc56be000;
}
static void
petalogix_ml605_init(QEMUMachineInitArgs *args)
{
ram_addr_t ram_size = args->ram_size;
const char *cpu_model = args->cpu_model;
MemoryRegion *address_space_mem = get_system_memory();
DeviceState *dev, *dma, *eth0;
MicroBlazeCPU *cpu;
SysBusDevice *busdev;
CPUMBState *env;
DriveInfo *dinfo;
int i;
hwaddr ddr_base = MEMORY_BASEADDR;
MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1);
MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
qemu_irq irq[32], *cpu_irq;
/* init CPUs */
if (cpu_model == NULL) {
cpu_model = "microblaze";
}
cpu = cpu_mb_init(cpu_model);
env = &cpu->env;
/* Attach emulated BRAM through the LMB. */
memory_region_init_ram(phys_lmb_bram, "petalogix_ml605.lmb_bram",
LMB_BRAM_SIZE);
vmstate_register_ram_global(phys_lmb_bram);
memory_region_add_subregion(address_space_mem, 0x00000000, phys_lmb_bram);
memory_region_init_ram(phys_ram, "petalogix_ml605.ram", ram_size);
vmstate_register_ram_global(phys_ram);
memory_region_add_subregion(address_space_mem, ddr_base, phys_ram);
dinfo = drive_get(IF_PFLASH, 0, 0);
/* 5th parameter 2 means bank-width
* 10th paremeter 0 means little-endian */
pflash_cfi01_register(FLASH_BASEADDR,
NULL, "petalogix_ml605.flash", FLASH_SIZE,
dinfo ? dinfo->bdrv : NULL, (64 * 1024),
FLASH_SIZE >> 16,
2, 0x89, 0x18, 0x0000, 0x0, 0);
cpu_irq = microblaze_pic_init_cpu(env);
dev = xilinx_intc_create(INTC_BASEADDR, cpu_irq[0], 4);
for (i = 0; i < 32; i++) {
irq[i] = qdev_get_gpio_in(dev, i);
}
serial_mm_init(address_space_mem, UART16550_BASEADDR + 0x1000, 2,
irq[5], 115200, serial_hds[0], DEVICE_LITTLE_ENDIAN);
/* 2 timers at irq 2 @ 100 Mhz. */
xilinx_timer_create(TIMER_BASEADDR, irq[2], 0, 100 * 1000000);
/* axi ethernet and dma initialization. */
qemu_check_nic_model(&nd_table[0], "xlnx.axi-ethernet");
eth0 = qdev_create(NULL, "xlnx.axi-ethernet");
dma = qdev_create(NULL, "xlnx.axi-dma");
/* FIXME: attach to the sysbus instead */
object_property_add_child(container_get(qdev_get_machine(), "/unattached"),
"xilinx-dma", OBJECT(dma), NULL);
xilinx_axiethernet_init(eth0, &nd_table[0], STREAM_SLAVE(dma),
0x82780000, irq[3], 0x1000, 0x1000);
xilinx_axidma_init(dma, STREAM_SLAVE(eth0), 0x84600000, irq[1], irq[0],
100 * 1000000);
{
SSIBus *spi;
dev = qdev_create(NULL, "xlnx.xps-spi");
qdev_prop_set_uint8(dev, "num-ss-bits", NUM_SPI_FLASHES);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0x40a00000);
sysbus_connect_irq(busdev, 0, irq[4]);
spi = (SSIBus *)qdev_get_child_bus(dev, "spi");
for (i = 0; i < NUM_SPI_FLASHES; i++) {
qemu_irq cs_line;
dev = ssi_create_slave(spi, "n25q128");
cs_line = qdev_get_gpio_in(dev, 0);
sysbus_connect_irq(busdev, i+1, cs_line);
}
}
microblaze_load_kernel(cpu, ddr_base, ram_size, BINARY_DEVICE_TREE_FILE,
machine_cpu_reset);
}
static QEMUMachine petalogix_ml605_machine = {
.name = "petalogix-ml605",
.desc = "PetaLogix linux refdesign for xilinx ml605 little endian",
.init = petalogix_ml605_init,
.is_default = 0,
DEFAULT_MACHINE_OPTIONS,
};
static void petalogix_ml605_machine_init(void)
{
qemu_register_machine(&petalogix_ml605_machine);
}
machine_init(petalogix_ml605_machine_init);