| /* |
| * Copyright (c) 2015 Jean-Christophe Dubois <jcd@tribudubois.net> |
| * |
| * i.MX6 SOC emulation. |
| * |
| * Based on hw/arm/fsl-imx31.c |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qapi/error.h" |
| #include "hw/arm/fsl-imx6.h" |
| #include "hw/misc/unimp.h" |
| #include "hw/usb/imx-usb-phy.h" |
| #include "hw/boards.h" |
| #include "hw/qdev-properties.h" |
| #include "sysemu/sysemu.h" |
| #include "chardev/char.h" |
| #include "qemu/error-report.h" |
| #include "qemu/module.h" |
| #include "target/arm/cpu-qom.h" |
| |
| #define IMX6_ESDHC_CAPABILITIES 0x057834b4 |
| |
| #define NAME_SIZE 20 |
| |
| static void fsl_imx6_init(Object *obj) |
| { |
| MachineState *ms = MACHINE(qdev_get_machine()); |
| FslIMX6State *s = FSL_IMX6(obj); |
| char name[NAME_SIZE]; |
| int i; |
| |
| for (i = 0; i < MIN(ms->smp.cpus, FSL_IMX6_NUM_CPUS); i++) { |
| snprintf(name, NAME_SIZE, "cpu%d", i); |
| object_initialize_child(obj, name, &s->cpu[i], |
| ARM_CPU_TYPE_NAME("cortex-a9")); |
| } |
| |
| object_initialize_child(obj, "a9mpcore", &s->a9mpcore, TYPE_A9MPCORE_PRIV); |
| |
| object_initialize_child(obj, "ccm", &s->ccm, TYPE_IMX6_CCM); |
| |
| object_initialize_child(obj, "src", &s->src, TYPE_IMX6_SRC); |
| |
| object_initialize_child(obj, "snvs", &s->snvs, TYPE_IMX7_SNVS); |
| |
| for (i = 0; i < FSL_IMX6_NUM_UARTS; i++) { |
| snprintf(name, NAME_SIZE, "uart%d", i + 1); |
| object_initialize_child(obj, name, &s->uart[i], TYPE_IMX_SERIAL); |
| } |
| |
| object_initialize_child(obj, "gpt", &s->gpt, TYPE_IMX6_GPT); |
| |
| for (i = 0; i < FSL_IMX6_NUM_EPITS; i++) { |
| snprintf(name, NAME_SIZE, "epit%d", i + 1); |
| object_initialize_child(obj, name, &s->epit[i], TYPE_IMX_EPIT); |
| } |
| |
| for (i = 0; i < FSL_IMX6_NUM_I2CS; i++) { |
| snprintf(name, NAME_SIZE, "i2c%d", i + 1); |
| object_initialize_child(obj, name, &s->i2c[i], TYPE_IMX_I2C); |
| } |
| |
| for (i = 0; i < FSL_IMX6_NUM_GPIOS; i++) { |
| snprintf(name, NAME_SIZE, "gpio%d", i + 1); |
| object_initialize_child(obj, name, &s->gpio[i], TYPE_IMX_GPIO); |
| } |
| |
| for (i = 0; i < FSL_IMX6_NUM_ESDHCS; i++) { |
| snprintf(name, NAME_SIZE, "sdhc%d", i + 1); |
| object_initialize_child(obj, name, &s->esdhc[i], TYPE_IMX_USDHC); |
| } |
| |
| for (i = 0; i < FSL_IMX6_NUM_USB_PHYS; i++) { |
| snprintf(name, NAME_SIZE, "usbphy%d", i); |
| object_initialize_child(obj, name, &s->usbphy[i], TYPE_IMX_USBPHY); |
| } |
| for (i = 0; i < FSL_IMX6_NUM_USBS; i++) { |
| snprintf(name, NAME_SIZE, "usb%d", i); |
| object_initialize_child(obj, name, &s->usb[i], TYPE_CHIPIDEA); |
| } |
| |
| for (i = 0; i < FSL_IMX6_NUM_ECSPIS; i++) { |
| snprintf(name, NAME_SIZE, "spi%d", i + 1); |
| object_initialize_child(obj, name, &s->spi[i], TYPE_IMX_SPI); |
| } |
| for (i = 0; i < FSL_IMX6_NUM_WDTS; i++) { |
| snprintf(name, NAME_SIZE, "wdt%d", i); |
| object_initialize_child(obj, name, &s->wdt[i], TYPE_IMX2_WDT); |
| } |
| |
| |
| object_initialize_child(obj, "eth", &s->eth, TYPE_IMX_ENET); |
| |
| object_initialize_child(obj, "pcie", &s->pcie, TYPE_DESIGNWARE_PCIE_HOST); |
| } |
| |
| static void fsl_imx6_realize(DeviceState *dev, Error **errp) |
| { |
| MachineState *ms = MACHINE(qdev_get_machine()); |
| FslIMX6State *s = FSL_IMX6(dev); |
| uint16_t i; |
| qemu_irq irq; |
| unsigned int smp_cpus = ms->smp.cpus; |
| |
| if (smp_cpus > FSL_IMX6_NUM_CPUS) { |
| error_setg(errp, "%s: Only %d CPUs are supported (%d requested)", |
| TYPE_FSL_IMX6, FSL_IMX6_NUM_CPUS, smp_cpus); |
| return; |
| } |
| |
| for (i = 0; i < smp_cpus; i++) { |
| |
| /* On uniprocessor, the CBAR is set to 0 */ |
| if (smp_cpus > 1) { |
| object_property_set_int(OBJECT(&s->cpu[i]), "reset-cbar", |
| FSL_IMX6_A9MPCORE_ADDR, &error_abort); |
| } |
| |
| /* All CPU but CPU 0 start in power off mode */ |
| if (i) { |
| object_property_set_bool(OBJECT(&s->cpu[i]), "start-powered-off", |
| true, &error_abort); |
| } |
| |
| if (!qdev_realize(DEVICE(&s->cpu[i]), NULL, errp)) { |
| return; |
| } |
| } |
| |
| object_property_set_int(OBJECT(&s->a9mpcore), "num-cpu", smp_cpus, |
| &error_abort); |
| |
| object_property_set_int(OBJECT(&s->a9mpcore), "num-irq", |
| FSL_IMX6_MAX_IRQ + GIC_INTERNAL, &error_abort); |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->a9mpcore), errp)) { |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->a9mpcore), 0, FSL_IMX6_A9MPCORE_ADDR); |
| |
| for (i = 0; i < smp_cpus; i++) { |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->a9mpcore), i, |
| qdev_get_gpio_in(DEVICE(&s->cpu[i]), ARM_CPU_IRQ)); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->a9mpcore), i + smp_cpus, |
| qdev_get_gpio_in(DEVICE(&s->cpu[i]), ARM_CPU_FIQ)); |
| } |
| |
| /* L2 cache controller */ |
| sysbus_create_simple("l2x0", FSL_IMX6_PL310_ADDR, NULL); |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->ccm), errp)) { |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->ccm), 0, FSL_IMX6_CCM_ADDR); |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->src), errp)) { |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->src), 0, FSL_IMX6_SRC_ADDR); |
| |
| /* Initialize all UARTs */ |
| for (i = 0; i < FSL_IMX6_NUM_UARTS; i++) { |
| static const struct { |
| hwaddr addr; |
| unsigned int irq; |
| } serial_table[FSL_IMX6_NUM_UARTS] = { |
| { FSL_IMX6_UART1_ADDR, FSL_IMX6_UART1_IRQ }, |
| { FSL_IMX6_UART2_ADDR, FSL_IMX6_UART2_IRQ }, |
| { FSL_IMX6_UART3_ADDR, FSL_IMX6_UART3_IRQ }, |
| { FSL_IMX6_UART4_ADDR, FSL_IMX6_UART4_IRQ }, |
| { FSL_IMX6_UART5_ADDR, FSL_IMX6_UART5_IRQ }, |
| }; |
| |
| qdev_prop_set_chr(DEVICE(&s->uart[i]), "chardev", serial_hd(i)); |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->uart[i]), errp)) { |
| return; |
| } |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->uart[i]), 0, serial_table[i].addr); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->uart[i]), 0, |
| qdev_get_gpio_in(DEVICE(&s->a9mpcore), |
| serial_table[i].irq)); |
| } |
| |
| s->gpt.ccm = IMX_CCM(&s->ccm); |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpt), errp)) { |
| return; |
| } |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpt), 0, FSL_IMX6_GPT_ADDR); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpt), 0, |
| qdev_get_gpio_in(DEVICE(&s->a9mpcore), |
| FSL_IMX6_GPT_IRQ)); |
| |
| /* Initialize all EPIT timers */ |
| for (i = 0; i < FSL_IMX6_NUM_EPITS; i++) { |
| static const struct { |
| hwaddr addr; |
| unsigned int irq; |
| } epit_table[FSL_IMX6_NUM_EPITS] = { |
| { FSL_IMX6_EPIT1_ADDR, FSL_IMX6_EPIT1_IRQ }, |
| { FSL_IMX6_EPIT2_ADDR, FSL_IMX6_EPIT2_IRQ }, |
| }; |
| |
| s->epit[i].ccm = IMX_CCM(&s->ccm); |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->epit[i]), errp)) { |
| return; |
| } |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->epit[i]), 0, epit_table[i].addr); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->epit[i]), 0, |
| qdev_get_gpio_in(DEVICE(&s->a9mpcore), |
| epit_table[i].irq)); |
| } |
| |
| /* Initialize all I2C */ |
| for (i = 0; i < FSL_IMX6_NUM_I2CS; i++) { |
| static const struct { |
| hwaddr addr; |
| unsigned int irq; |
| } i2c_table[FSL_IMX6_NUM_I2CS] = { |
| { FSL_IMX6_I2C1_ADDR, FSL_IMX6_I2C1_IRQ }, |
| { FSL_IMX6_I2C2_ADDR, FSL_IMX6_I2C2_IRQ }, |
| { FSL_IMX6_I2C3_ADDR, FSL_IMX6_I2C3_IRQ } |
| }; |
| |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->i2c[i]), errp)) { |
| return; |
| } |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->i2c[i]), 0, i2c_table[i].addr); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->i2c[i]), 0, |
| qdev_get_gpio_in(DEVICE(&s->a9mpcore), |
| i2c_table[i].irq)); |
| } |
| |
| /* Initialize all GPIOs */ |
| for (i = 0; i < FSL_IMX6_NUM_GPIOS; i++) { |
| static const struct { |
| hwaddr addr; |
| unsigned int irq_low; |
| unsigned int irq_high; |
| } gpio_table[FSL_IMX6_NUM_GPIOS] = { |
| { |
| FSL_IMX6_GPIO1_ADDR, |
| FSL_IMX6_GPIO1_LOW_IRQ, |
| FSL_IMX6_GPIO1_HIGH_IRQ |
| }, |
| { |
| FSL_IMX6_GPIO2_ADDR, |
| FSL_IMX6_GPIO2_LOW_IRQ, |
| FSL_IMX6_GPIO2_HIGH_IRQ |
| }, |
| { |
| FSL_IMX6_GPIO3_ADDR, |
| FSL_IMX6_GPIO3_LOW_IRQ, |
| FSL_IMX6_GPIO3_HIGH_IRQ |
| }, |
| { |
| FSL_IMX6_GPIO4_ADDR, |
| FSL_IMX6_GPIO4_LOW_IRQ, |
| FSL_IMX6_GPIO4_HIGH_IRQ |
| }, |
| { |
| FSL_IMX6_GPIO5_ADDR, |
| FSL_IMX6_GPIO5_LOW_IRQ, |
| FSL_IMX6_GPIO5_HIGH_IRQ |
| }, |
| { |
| FSL_IMX6_GPIO6_ADDR, |
| FSL_IMX6_GPIO6_LOW_IRQ, |
| FSL_IMX6_GPIO6_HIGH_IRQ |
| }, |
| { |
| FSL_IMX6_GPIO7_ADDR, |
| FSL_IMX6_GPIO7_LOW_IRQ, |
| FSL_IMX6_GPIO7_HIGH_IRQ |
| }, |
| }; |
| |
| object_property_set_bool(OBJECT(&s->gpio[i]), "has-edge-sel", true, |
| &error_abort); |
| object_property_set_bool(OBJECT(&s->gpio[i]), "has-upper-pin-irq", |
| true, &error_abort); |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), errp)) { |
| return; |
| } |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio[i]), 0, gpio_table[i].addr); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 0, |
| qdev_get_gpio_in(DEVICE(&s->a9mpcore), |
| gpio_table[i].irq_low)); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio[i]), 1, |
| qdev_get_gpio_in(DEVICE(&s->a9mpcore), |
| gpio_table[i].irq_high)); |
| } |
| |
| /* Initialize all SDHC */ |
| for (i = 0; i < FSL_IMX6_NUM_ESDHCS; i++) { |
| static const struct { |
| hwaddr addr; |
| unsigned int irq; |
| } esdhc_table[FSL_IMX6_NUM_ESDHCS] = { |
| { FSL_IMX6_uSDHC1_ADDR, FSL_IMX6_uSDHC1_IRQ }, |
| { FSL_IMX6_uSDHC2_ADDR, FSL_IMX6_uSDHC2_IRQ }, |
| { FSL_IMX6_uSDHC3_ADDR, FSL_IMX6_uSDHC3_IRQ }, |
| { FSL_IMX6_uSDHC4_ADDR, FSL_IMX6_uSDHC4_IRQ }, |
| }; |
| |
| /* UHS-I SDIO3.0 SDR104 1.8V ADMA */ |
| object_property_set_uint(OBJECT(&s->esdhc[i]), "sd-spec-version", 3, |
| &error_abort); |
| object_property_set_uint(OBJECT(&s->esdhc[i]), "capareg", |
| IMX6_ESDHC_CAPABILITIES, &error_abort); |
| object_property_set_uint(OBJECT(&s->esdhc[i]), "vendor", |
| SDHCI_VENDOR_IMX, &error_abort); |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->esdhc[i]), errp)) { |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->esdhc[i]), 0, esdhc_table[i].addr); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->esdhc[i]), 0, |
| qdev_get_gpio_in(DEVICE(&s->a9mpcore), |
| esdhc_table[i].irq)); |
| } |
| |
| /* USB */ |
| for (i = 0; i < FSL_IMX6_NUM_USB_PHYS; i++) { |
| sysbus_realize(SYS_BUS_DEVICE(&s->usbphy[i]), &error_abort); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->usbphy[i]), 0, |
| FSL_IMX6_USBPHY1_ADDR + i * 0x1000); |
| } |
| for (i = 0; i < FSL_IMX6_NUM_USBS; i++) { |
| static const int FSL_IMX6_USBn_IRQ[] = { |
| FSL_IMX6_USB_OTG_IRQ, |
| FSL_IMX6_USB_HOST1_IRQ, |
| FSL_IMX6_USB_HOST2_IRQ, |
| FSL_IMX6_USB_HOST3_IRQ, |
| }; |
| |
| sysbus_realize(SYS_BUS_DEVICE(&s->usb[i]), &error_abort); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->usb[i]), 0, |
| FSL_IMX6_USBOH3_USB_ADDR + i * 0x200); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->usb[i]), 0, |
| qdev_get_gpio_in(DEVICE(&s->a9mpcore), |
| FSL_IMX6_USBn_IRQ[i])); |
| } |
| |
| /* Initialize all ECSPI */ |
| for (i = 0; i < FSL_IMX6_NUM_ECSPIS; i++) { |
| static const struct { |
| hwaddr addr; |
| unsigned int irq; |
| } spi_table[FSL_IMX6_NUM_ECSPIS] = { |
| { FSL_IMX6_eCSPI1_ADDR, FSL_IMX6_ECSPI1_IRQ }, |
| { FSL_IMX6_eCSPI2_ADDR, FSL_IMX6_ECSPI2_IRQ }, |
| { FSL_IMX6_eCSPI3_ADDR, FSL_IMX6_ECSPI3_IRQ }, |
| { FSL_IMX6_eCSPI4_ADDR, FSL_IMX6_ECSPI4_IRQ }, |
| { FSL_IMX6_eCSPI5_ADDR, FSL_IMX6_ECSPI5_IRQ }, |
| }; |
| |
| /* Initialize the SPI */ |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) { |
| return; |
| } |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi[i]), 0, spi_table[i].addr); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi[i]), 0, |
| qdev_get_gpio_in(DEVICE(&s->a9mpcore), |
| spi_table[i].irq)); |
| } |
| |
| object_property_set_uint(OBJECT(&s->eth), "phy-num", s->phy_num, |
| &error_abort); |
| qdev_set_nic_properties(DEVICE(&s->eth), &nd_table[0]); |
| if (!sysbus_realize(SYS_BUS_DEVICE(&s->eth), errp)) { |
| return; |
| } |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->eth), 0, FSL_IMX6_ENET_ADDR); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth), 0, |
| qdev_get_gpio_in(DEVICE(&s->a9mpcore), |
| FSL_IMX6_ENET_MAC_IRQ)); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->eth), 1, |
| qdev_get_gpio_in(DEVICE(&s->a9mpcore), |
| FSL_IMX6_ENET_MAC_1588_IRQ)); |
| |
| /* |
| * SNVS |
| */ |
| sysbus_realize(SYS_BUS_DEVICE(&s->snvs), &error_abort); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->snvs), 0, FSL_IMX6_SNVSHP_ADDR); |
| |
| /* |
| * Watchdog |
| */ |
| for (i = 0; i < FSL_IMX6_NUM_WDTS; i++) { |
| static const hwaddr FSL_IMX6_WDOGn_ADDR[FSL_IMX6_NUM_WDTS] = { |
| FSL_IMX6_WDOG1_ADDR, |
| FSL_IMX6_WDOG2_ADDR, |
| }; |
| static const int FSL_IMX6_WDOGn_IRQ[FSL_IMX6_NUM_WDTS] = { |
| FSL_IMX6_WDOG1_IRQ, |
| FSL_IMX6_WDOG2_IRQ, |
| }; |
| |
| object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support", |
| true, &error_abort); |
| sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), &error_abort); |
| |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, FSL_IMX6_WDOGn_ADDR[i]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt[i]), 0, |
| qdev_get_gpio_in(DEVICE(&s->a9mpcore), |
| FSL_IMX6_WDOGn_IRQ[i])); |
| } |
| |
| /* |
| * PCIe |
| */ |
| sysbus_realize(SYS_BUS_DEVICE(&s->pcie), &error_abort); |
| sysbus_mmio_map(SYS_BUS_DEVICE(&s->pcie), 0, FSL_IMX6_PCIe_REG_ADDR); |
| |
| irq = qdev_get_gpio_in(DEVICE(&s->a9mpcore), FSL_IMX6_PCIE1_IRQ); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 0, irq); |
| irq = qdev_get_gpio_in(DEVICE(&s->a9mpcore), FSL_IMX6_PCIE2_IRQ); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 1, irq); |
| irq = qdev_get_gpio_in(DEVICE(&s->a9mpcore), FSL_IMX6_PCIE3_IRQ); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 2, irq); |
| irq = qdev_get_gpio_in(DEVICE(&s->a9mpcore), FSL_IMX6_PCIE4_IRQ); |
| sysbus_connect_irq(SYS_BUS_DEVICE(&s->pcie), 3, irq); |
| |
| /* |
| * PCIe PHY |
| */ |
| create_unimplemented_device("pcie-phy", FSL_IMX6_PCIe_ADDR, |
| FSL_IMX6_PCIe_SIZE); |
| |
| /* ROM memory */ |
| if (!memory_region_init_rom(&s->rom, OBJECT(dev), "imx6.rom", |
| FSL_IMX6_ROM_SIZE, errp)) { |
| return; |
| } |
| memory_region_add_subregion(get_system_memory(), FSL_IMX6_ROM_ADDR, |
| &s->rom); |
| |
| /* CAAM memory */ |
| if (!memory_region_init_rom(&s->caam, OBJECT(dev), "imx6.caam", |
| FSL_IMX6_CAAM_MEM_SIZE, errp)) { |
| return; |
| } |
| memory_region_add_subregion(get_system_memory(), FSL_IMX6_CAAM_MEM_ADDR, |
| &s->caam); |
| |
| /* OCRAM memory */ |
| if (!memory_region_init_ram(&s->ocram, NULL, "imx6.ocram", |
| FSL_IMX6_OCRAM_SIZE, errp)) { |
| return; |
| } |
| memory_region_add_subregion(get_system_memory(), FSL_IMX6_OCRAM_ADDR, |
| &s->ocram); |
| |
| /* internal OCRAM (256 KB) is aliased over 1 MB */ |
| memory_region_init_alias(&s->ocram_alias, OBJECT(dev), "imx6.ocram_alias", |
| &s->ocram, 0, FSL_IMX6_OCRAM_ALIAS_SIZE); |
| memory_region_add_subregion(get_system_memory(), FSL_IMX6_OCRAM_ALIAS_ADDR, |
| &s->ocram_alias); |
| } |
| |
| static Property fsl_imx6_properties[] = { |
| DEFINE_PROP_UINT32("fec-phy-num", FslIMX6State, phy_num, 0), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void fsl_imx6_class_init(ObjectClass *oc, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(oc); |
| |
| device_class_set_props(dc, fsl_imx6_properties); |
| dc->realize = fsl_imx6_realize; |
| dc->desc = "i.MX6 SOC"; |
| /* Reason: Uses serial_hd() in the realize() function */ |
| dc->user_creatable = false; |
| } |
| |
| static const TypeInfo fsl_imx6_type_info = { |
| .name = TYPE_FSL_IMX6, |
| .parent = TYPE_DEVICE, |
| .instance_size = sizeof(FslIMX6State), |
| .instance_init = fsl_imx6_init, |
| .class_init = fsl_imx6_class_init, |
| }; |
| |
| static void fsl_imx6_register_types(void) |
| { |
| type_register_static(&fsl_imx6_type_info); |
| } |
| |
| type_init(fsl_imx6_register_types) |