| QA output created by zoned |
| Testing a null_blk device: |
| case 1: if the operations work |
| (1) report the first zone: |
| start: 0x0, len 0x80000, cap 0x80000, wptr 0x0, zcond:1, [type: 2] |
| |
| report the first 10 zones |
| start: 0x0, len 0x80000, cap 0x80000, wptr 0x0, zcond:1, [type: 2] |
| start: 0x80000, len 0x80000, cap 0x80000, wptr 0x80000, zcond:1, [type: 2] |
| start: 0x100000, len 0x80000, cap 0x80000, wptr 0x100000, zcond:1, [type: 2] |
| start: 0x180000, len 0x80000, cap 0x80000, wptr 0x180000, zcond:1, [type: 2] |
| start: 0x200000, len 0x80000, cap 0x80000, wptr 0x200000, zcond:1, [type: 2] |
| start: 0x280000, len 0x80000, cap 0x80000, wptr 0x280000, zcond:1, [type: 2] |
| start: 0x300000, len 0x80000, cap 0x80000, wptr 0x300000, zcond:1, [type: 2] |
| start: 0x380000, len 0x80000, cap 0x80000, wptr 0x380000, zcond:1, [type: 2] |
| start: 0x400000, len 0x80000, cap 0x80000, wptr 0x400000, zcond:1, [type: 2] |
| start: 0x480000, len 0x80000, cap 0x80000, wptr 0x480000, zcond:1, [type: 2] |
| |
| report the last zone: |
| start: 0x1f380000, len 0x80000, cap 0x80000, wptr 0x1f380000, zcond:1, [type: 2] |
| |
| |
| (2) opening the first zone |
| report after: |
| start: 0x0, len 0x80000, cap 0x80000, wptr 0x0, zcond:3, [type: 2] |
| |
| opening the second zone |
| report after: |
| start: 0x80000, len 0x80000, cap 0x80000, wptr 0x80000, zcond:3, [type: 2] |
| |
| opening the last zone |
| report after: |
| start: 0x1f380000, len 0x80000, cap 0x80000, wptr 0x1f380000, zcond:3, [type: 2] |
| |
| |
| (3) closing the first zone |
| report after: |
| start: 0x0, len 0x80000, cap 0x80000, wptr 0x0, zcond:1, [type: 2] |
| |
| closing the last zone |
| report after: |
| start: 0x1f380000, len 0x80000, cap 0x80000, wptr 0x1f380000, zcond:1, [type: 2] |
| |
| |
| (4) finishing the second zone |
| After finishing a zone: |
| start: 0x80000, len 0x80000, cap 0x80000, wptr 0x100000, zcond:14, [type: 2] |
| |
| |
| (5) resetting the second zone |
| After resetting a zone: |
| start: 0x80000, len 0x80000, cap 0x80000, wptr 0x80000, zcond:1, [type: 2] |
| |
| |
| (6) append write |
| start: 0x0, len 0x80000, cap 0x80000, wptr 0x0, zcond:1, [type: 2] |
| After zap done, the append sector is 0x0 |
| After appending the first zone firstly: |
| start: 0x0, len 0x80000, cap 0x80000, wptr 0x18, zcond:2, [type: 2] |
| After zap done, the append sector is 0x18 |
| After appending the first zone secondly: |
| start: 0x0, len 0x80000, cap 0x80000, wptr 0x30, zcond:2, [type: 2] |
| After zap done, the append sector is 0x80000 |
| After appending the second zone firstly: |
| start: 0x80000, len 0x80000, cap 0x80000, wptr 0x80018, zcond:2, [type: 2] |
| After zap done, the append sector is 0x80018 |
| After appending the second zone secondly: |
| start: 0x80000, len 0x80000, cap 0x80000, wptr 0x80030, zcond:2, [type: 2] |
| *** done |
