| /* |
| * libqos virtio PCI driver |
| * |
| * Copyright (c) 2014 Marc MarĂ |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "libqtest.h" |
| #include "libqos/virtio.h" |
| #include "libqos/virtio-pci.h" |
| #include "libqos/pci.h" |
| #include "libqos/pci-pc.h" |
| #include "libqos/malloc.h" |
| #include "libqos/malloc-pc.h" |
| #include "libqos/qgraph.h" |
| #include "standard-headers/linux/virtio_ring.h" |
| #include "standard-headers/linux/virtio_pci.h" |
| |
| #include "hw/pci/pci.h" |
| #include "hw/pci/pci_regs.h" |
| |
| #include "virtio-pci-modern.h" |
| |
| /* virtio-pci is a superclass of all virtio-xxx-pci devices; |
| * the relation between virtio-pci and virtio-xxx-pci is implicit, |
| * and therefore virtio-pci does not produce virtio and is not |
| * reached by any edge, not even as a "contains" edge. |
| * In facts, every device is a QVirtioPCIDevice with |
| * additional fields, since every one has its own |
| * number of queues and various attributes. |
| * Virtio-pci provides default functions to start the |
| * hw and destroy the object, and nodes that want to |
| * override them should always remember to call the |
| * original qvirtio_pci_destructor and qvirtio_pci_start_hw. |
| */ |
| |
| #define CONFIG_BASE(dev) (VIRTIO_PCI_CONFIG_OFF((dev)->pdev->msix_enabled)) |
| |
| static uint8_t qvirtio_pci_config_readb(QVirtioDevice *d, uint64_t off) |
| { |
| QVirtioPCIDevice *dev = container_of(d, QVirtioPCIDevice, vdev); |
| return qpci_io_readb(dev->pdev, dev->bar, CONFIG_BASE(dev) + off); |
| } |
| |
| /* PCI is always read in little-endian order |
| * but virtio ( < 1.0) is in guest order |
| * so with a big-endian guest the order has been reversed, |
| * reverse it again |
| * virtio-1.0 is always little-endian, like PCI |
| */ |
| |
| static uint16_t qvirtio_pci_config_readw(QVirtioDevice *d, uint64_t off) |
| { |
| QVirtioPCIDevice *dev = container_of(d, QVirtioPCIDevice, vdev); |
| uint16_t value; |
| |
| value = qpci_io_readw(dev->pdev, dev->bar, CONFIG_BASE(dev) + off); |
| if (qvirtio_is_big_endian(d)) { |
| value = bswap16(value); |
| } |
| return value; |
| } |
| |
| static uint32_t qvirtio_pci_config_readl(QVirtioDevice *d, uint64_t off) |
| { |
| QVirtioPCIDevice *dev = container_of(d, QVirtioPCIDevice, vdev); |
| uint32_t value; |
| |
| value = qpci_io_readl(dev->pdev, dev->bar, CONFIG_BASE(dev) + off); |
| if (qvirtio_is_big_endian(d)) { |
| value = bswap32(value); |
| } |
| return value; |
| } |
| |
| static uint64_t qvirtio_pci_config_readq(QVirtioDevice *d, uint64_t off) |
| { |
| QVirtioPCIDevice *dev = container_of(d, QVirtioPCIDevice, vdev); |
| uint64_t val; |
| |
| val = qpci_io_readq(dev->pdev, dev->bar, CONFIG_BASE(dev) + off); |
| if (qvirtio_is_big_endian(d)) { |
| val = bswap64(val); |
| } |
| |
| return val; |
| } |
| |
| static uint64_t qvirtio_pci_get_features(QVirtioDevice *d) |
| { |
| QVirtioPCIDevice *dev = container_of(d, QVirtioPCIDevice, vdev); |
| return qpci_io_readl(dev->pdev, dev->bar, VIRTIO_PCI_HOST_FEATURES); |
| } |
| |
| static void qvirtio_pci_set_features(QVirtioDevice *d, uint64_t features) |
| { |
| QVirtioPCIDevice *dev = container_of(d, QVirtioPCIDevice, vdev); |
| qpci_io_writel(dev->pdev, dev->bar, VIRTIO_PCI_GUEST_FEATURES, features); |
| } |
| |
| static uint64_t qvirtio_pci_get_guest_features(QVirtioDevice *d) |
| { |
| QVirtioPCIDevice *dev = container_of(d, QVirtioPCIDevice, vdev); |
| return qpci_io_readl(dev->pdev, dev->bar, VIRTIO_PCI_GUEST_FEATURES); |
| } |
| |
| static uint8_t qvirtio_pci_get_status(QVirtioDevice *d) |
| { |
| QVirtioPCIDevice *dev = container_of(d, QVirtioPCIDevice, vdev); |
| return qpci_io_readb(dev->pdev, dev->bar, VIRTIO_PCI_STATUS); |
| } |
| |
| static void qvirtio_pci_set_status(QVirtioDevice *d, uint8_t status) |
| { |
| QVirtioPCIDevice *dev = container_of(d, QVirtioPCIDevice, vdev); |
| qpci_io_writeb(dev->pdev, dev->bar, VIRTIO_PCI_STATUS, status); |
| } |
| |
| static bool qvirtio_pci_get_queue_isr_status(QVirtioDevice *d, QVirtQueue *vq) |
| { |
| QVirtioPCIDevice *dev = container_of(d, QVirtioPCIDevice, vdev); |
| QVirtQueuePCI *vqpci = (QVirtQueuePCI *)vq; |
| uint32_t data; |
| |
| if (dev->pdev->msix_enabled) { |
| g_assert_cmpint(vqpci->msix_entry, !=, -1); |
| if (qpci_msix_masked(dev->pdev, vqpci->msix_entry)) { |
| /* No ISR checking should be done if masked, but read anyway */ |
| return qpci_msix_pending(dev->pdev, vqpci->msix_entry); |
| } else { |
| data = qtest_readl(dev->pdev->bus->qts, vqpci->msix_addr); |
| if (data == vqpci->msix_data) { |
| qtest_writel(dev->pdev->bus->qts, vqpci->msix_addr, 0); |
| return true; |
| } else { |
| return false; |
| } |
| } |
| } else { |
| return qpci_io_readb(dev->pdev, dev->bar, VIRTIO_PCI_ISR) & 1; |
| } |
| } |
| |
| static bool qvirtio_pci_get_config_isr_status(QVirtioDevice *d) |
| { |
| QVirtioPCIDevice *dev = container_of(d, QVirtioPCIDevice, vdev); |
| uint32_t data; |
| |
| if (dev->pdev->msix_enabled) { |
| g_assert_cmpint(dev->config_msix_entry, !=, -1); |
| if (qpci_msix_masked(dev->pdev, dev->config_msix_entry)) { |
| /* No ISR checking should be done if masked, but read anyway */ |
| return qpci_msix_pending(dev->pdev, dev->config_msix_entry); |
| } else { |
| data = qtest_readl(dev->pdev->bus->qts, dev->config_msix_addr); |
| if (data == dev->config_msix_data) { |
| qtest_writel(dev->pdev->bus->qts, dev->config_msix_addr, 0); |
| return true; |
| } else { |
| return false; |
| } |
| } |
| } else { |
| return qpci_io_readb(dev->pdev, dev->bar, VIRTIO_PCI_ISR) & 2; |
| } |
| } |
| |
| static void qvirtio_pci_wait_config_isr_status(QVirtioDevice *d, |
| gint64 timeout_us) |
| { |
| QVirtioPCIDevice *dev = container_of(d, QVirtioPCIDevice, vdev); |
| gint64 start_time = g_get_monotonic_time(); |
| |
| do { |
| g_assert(g_get_monotonic_time() - start_time <= timeout_us); |
| qtest_clock_step(dev->pdev->bus->qts, 100); |
| } while (!qvirtio_pci_get_config_isr_status(d)); |
| } |
| |
| static void qvirtio_pci_queue_select(QVirtioDevice *d, uint16_t index) |
| { |
| QVirtioPCIDevice *dev = container_of(d, QVirtioPCIDevice, vdev); |
| qpci_io_writeb(dev->pdev, dev->bar, VIRTIO_PCI_QUEUE_SEL, index); |
| } |
| |
| static uint16_t qvirtio_pci_get_queue_size(QVirtioDevice *d) |
| { |
| QVirtioPCIDevice *dev = container_of(d, QVirtioPCIDevice, vdev); |
| return qpci_io_readw(dev->pdev, dev->bar, VIRTIO_PCI_QUEUE_NUM); |
| } |
| |
| static void qvirtio_pci_set_queue_address(QVirtioDevice *d, QVirtQueue *vq) |
| { |
| QVirtioPCIDevice *dev = container_of(d, QVirtioPCIDevice, vdev); |
| uint64_t pfn = vq->desc / VIRTIO_PCI_VRING_ALIGN; |
| |
| qpci_io_writel(dev->pdev, dev->bar, VIRTIO_PCI_QUEUE_PFN, pfn); |
| } |
| |
| QVirtQueue *qvirtio_pci_virtqueue_setup_common(QVirtioDevice *d, |
| QGuestAllocator *alloc, |
| uint16_t index) |
| { |
| uint64_t feat; |
| uint64_t addr; |
| QVirtQueuePCI *vqpci; |
| QVirtioPCIDevice *qvpcidev = container_of(d, QVirtioPCIDevice, vdev); |
| |
| vqpci = g_malloc0(sizeof(*vqpci)); |
| feat = d->bus->get_guest_features(d); |
| |
| d->bus->queue_select(d, index); |
| vqpci->vq.vdev = d; |
| vqpci->vq.index = index; |
| vqpci->vq.size = d->bus->get_queue_size(d); |
| vqpci->vq.free_head = 0; |
| vqpci->vq.num_free = vqpci->vq.size; |
| vqpci->vq.align = VIRTIO_PCI_VRING_ALIGN; |
| vqpci->vq.indirect = feat & (1ull << VIRTIO_RING_F_INDIRECT_DESC); |
| vqpci->vq.event = feat & (1ull << VIRTIO_RING_F_EVENT_IDX); |
| |
| vqpci->msix_entry = -1; |
| vqpci->msix_addr = 0; |
| vqpci->msix_data = 0x12345678; |
| |
| /* Check different than 0 */ |
| g_assert_cmpint(vqpci->vq.size, !=, 0); |
| |
| /* Check power of 2 */ |
| g_assert_cmpint(vqpci->vq.size & (vqpci->vq.size - 1), ==, 0); |
| |
| addr = guest_alloc(alloc, qvring_size(vqpci->vq.size, |
| VIRTIO_PCI_VRING_ALIGN)); |
| qvring_init(qvpcidev->pdev->bus->qts, alloc, &vqpci->vq, addr); |
| d->bus->set_queue_address(d, &vqpci->vq); |
| |
| return &vqpci->vq; |
| } |
| |
| void qvirtio_pci_virtqueue_cleanup_common(QVirtQueue *vq, |
| QGuestAllocator *alloc) |
| { |
| QVirtQueuePCI *vqpci = container_of(vq, QVirtQueuePCI, vq); |
| |
| guest_free(alloc, vq->desc); |
| g_free(vqpci); |
| } |
| |
| static void qvirtio_pci_virtqueue_kick(QVirtioDevice *d, QVirtQueue *vq) |
| { |
| QVirtioPCIDevice *dev = container_of(d, QVirtioPCIDevice, vdev); |
| qpci_io_writew(dev->pdev, dev->bar, VIRTIO_PCI_QUEUE_NOTIFY, vq->index); |
| } |
| |
| static const QVirtioBus qvirtio_pci_legacy = { |
| .config_readb = qvirtio_pci_config_readb, |
| .config_readw = qvirtio_pci_config_readw, |
| .config_readl = qvirtio_pci_config_readl, |
| .config_readq = qvirtio_pci_config_readq, |
| .get_features = qvirtio_pci_get_features, |
| .set_features = qvirtio_pci_set_features, |
| .get_guest_features = qvirtio_pci_get_guest_features, |
| .get_status = qvirtio_pci_get_status, |
| .set_status = qvirtio_pci_set_status, |
| .get_queue_isr_status = qvirtio_pci_get_queue_isr_status, |
| .wait_config_isr_status = qvirtio_pci_wait_config_isr_status, |
| .queue_select = qvirtio_pci_queue_select, |
| .get_queue_size = qvirtio_pci_get_queue_size, |
| .set_queue_address = qvirtio_pci_set_queue_address, |
| .virtqueue_setup = qvirtio_pci_virtqueue_setup_common, |
| .virtqueue_cleanup = qvirtio_pci_virtqueue_cleanup_common, |
| .virtqueue_kick = qvirtio_pci_virtqueue_kick, |
| }; |
| |
| static void qvirtio_pci_set_config_vector(QVirtioPCIDevice *d, uint16_t entry) |
| { |
| uint16_t vector; |
| |
| qpci_io_writew(d->pdev, d->bar, VIRTIO_MSI_CONFIG_VECTOR, entry); |
| vector = qpci_io_readw(d->pdev, d->bar, VIRTIO_MSI_CONFIG_VECTOR); |
| g_assert_cmphex(vector, !=, VIRTIO_MSI_NO_VECTOR); |
| } |
| |
| static void qvirtio_pci_set_queue_vector(QVirtioPCIDevice *d, uint16_t vq_idx, |
| uint16_t entry) |
| { |
| uint16_t vector; |
| |
| qvirtio_pci_queue_select(&d->vdev, vq_idx); |
| qpci_io_writew(d->pdev, d->bar, VIRTIO_MSI_QUEUE_VECTOR, entry); |
| vector = qpci_io_readw(d->pdev, d->bar, VIRTIO_MSI_QUEUE_VECTOR); |
| g_assert_cmphex(vector, !=, VIRTIO_MSI_NO_VECTOR); |
| } |
| |
| static const QVirtioPCIMSIXOps qvirtio_pci_msix_ops_legacy = { |
| .set_config_vector = qvirtio_pci_set_config_vector, |
| .set_queue_vector = qvirtio_pci_set_queue_vector, |
| }; |
| |
| void qvirtio_pci_device_enable(QVirtioPCIDevice *d) |
| { |
| qpci_device_enable(d->pdev); |
| d->bar = qpci_iomap(d->pdev, d->bar_idx, NULL); |
| } |
| |
| void qvirtio_pci_device_disable(QVirtioPCIDevice *d) |
| { |
| qpci_iounmap(d->pdev, d->bar); |
| } |
| |
| void qvirtqueue_pci_msix_setup(QVirtioPCIDevice *d, QVirtQueuePCI *vqpci, |
| QGuestAllocator *alloc, uint16_t entry) |
| { |
| uint32_t control; |
| uint64_t off; |
| |
| g_assert(d->pdev->msix_enabled); |
| off = d->pdev->msix_table_off + (entry * 16); |
| |
| g_assert_cmpint(entry, >=, 0); |
| g_assert_cmpint(entry, <, qpci_msix_table_size(d->pdev)); |
| vqpci->msix_entry = entry; |
| |
| vqpci->msix_addr = guest_alloc(alloc, 4); |
| qpci_io_writel(d->pdev, d->pdev->msix_table_bar, |
| off + PCI_MSIX_ENTRY_LOWER_ADDR, vqpci->msix_addr & ~0UL); |
| qpci_io_writel(d->pdev, d->pdev->msix_table_bar, |
| off + PCI_MSIX_ENTRY_UPPER_ADDR, |
| (vqpci->msix_addr >> 32) & ~0UL); |
| qpci_io_writel(d->pdev, d->pdev->msix_table_bar, |
| off + PCI_MSIX_ENTRY_DATA, vqpci->msix_data); |
| |
| control = qpci_io_readl(d->pdev, d->pdev->msix_table_bar, |
| off + PCI_MSIX_ENTRY_VECTOR_CTRL); |
| qpci_io_writel(d->pdev, d->pdev->msix_table_bar, |
| off + PCI_MSIX_ENTRY_VECTOR_CTRL, |
| control & ~PCI_MSIX_ENTRY_CTRL_MASKBIT); |
| |
| d->msix_ops->set_queue_vector(d, vqpci->vq.index, entry); |
| } |
| |
| void qvirtio_pci_set_msix_configuration_vector(QVirtioPCIDevice *d, |
| QGuestAllocator *alloc, uint16_t entry) |
| { |
| uint32_t control; |
| uint64_t off; |
| |
| g_assert(d->pdev->msix_enabled); |
| off = d->pdev->msix_table_off + (entry * 16); |
| |
| g_assert_cmpint(entry, >=, 0); |
| g_assert_cmpint(entry, <, qpci_msix_table_size(d->pdev)); |
| d->config_msix_entry = entry; |
| |
| d->config_msix_data = 0x12345678; |
| d->config_msix_addr = guest_alloc(alloc, 4); |
| |
| qpci_io_writel(d->pdev, d->pdev->msix_table_bar, |
| off + PCI_MSIX_ENTRY_LOWER_ADDR, d->config_msix_addr & ~0UL); |
| qpci_io_writel(d->pdev, d->pdev->msix_table_bar, |
| off + PCI_MSIX_ENTRY_UPPER_ADDR, |
| (d->config_msix_addr >> 32) & ~0UL); |
| qpci_io_writel(d->pdev, d->pdev->msix_table_bar, |
| off + PCI_MSIX_ENTRY_DATA, d->config_msix_data); |
| |
| control = qpci_io_readl(d->pdev, d->pdev->msix_table_bar, |
| off + PCI_MSIX_ENTRY_VECTOR_CTRL); |
| qpci_io_writel(d->pdev, d->pdev->msix_table_bar, |
| off + PCI_MSIX_ENTRY_VECTOR_CTRL, |
| control & ~PCI_MSIX_ENTRY_CTRL_MASKBIT); |
| |
| d->msix_ops->set_config_vector(d, entry); |
| } |
| |
| void qvirtio_pci_destructor(QOSGraphObject *obj) |
| { |
| QVirtioPCIDevice *dev = (QVirtioPCIDevice *)obj; |
| qvirtio_pci_device_disable(dev); |
| g_free(dev->pdev); |
| } |
| |
| void qvirtio_pci_start_hw(QOSGraphObject *obj) |
| { |
| QVirtioPCIDevice *dev = (QVirtioPCIDevice *)obj; |
| qvirtio_pci_device_enable(dev); |
| qvirtio_start_device(&dev->vdev); |
| } |
| |
| static void qvirtio_pci_init_legacy(QVirtioPCIDevice *dev) |
| { |
| dev->vdev.device_type = qpci_config_readw(dev->pdev, PCI_SUBSYSTEM_ID); |
| dev->bar_idx = 0; |
| dev->vdev.bus = &qvirtio_pci_legacy; |
| dev->msix_ops = &qvirtio_pci_msix_ops_legacy; |
| dev->vdev.big_endian = qtest_big_endian(dev->pdev->bus->qts); |
| } |
| |
| static void qvirtio_pci_init_from_pcidev(QVirtioPCIDevice *dev, QPCIDevice *pci_dev) |
| { |
| dev->pdev = pci_dev; |
| dev->config_msix_entry = -1; |
| |
| if (!qvirtio_pci_init_virtio_1(dev)) { |
| qvirtio_pci_init_legacy(dev); |
| } |
| |
| /* each virtio-xxx-pci device should override at least this function */ |
| dev->obj.get_driver = NULL; |
| dev->obj.start_hw = qvirtio_pci_start_hw; |
| dev->obj.destructor = qvirtio_pci_destructor; |
| } |
| |
| void virtio_pci_init(QVirtioPCIDevice *dev, QPCIBus *bus, QPCIAddress * addr) |
| { |
| QPCIDevice *pci_dev = qpci_device_find(bus, addr->devfn); |
| g_assert_nonnull(pci_dev); |
| qvirtio_pci_init_from_pcidev(dev, pci_dev); |
| } |
| |
| QVirtioPCIDevice *virtio_pci_new(QPCIBus *bus, QPCIAddress * addr) |
| { |
| QVirtioPCIDevice *dev; |
| QPCIDevice *pci_dev = qpci_device_find(bus, addr->devfn); |
| if (!pci_dev) { |
| return NULL; |
| } |
| |
| dev = g_new0(QVirtioPCIDevice, 1); |
| qvirtio_pci_init_from_pcidev(dev, pci_dev); |
| dev->obj.free = g_free; |
| return dev; |
| } |