| /* |
| * USB Mass Storage Device emulation |
| * |
| * Copyright (c) 2006 CodeSourcery. |
| * Written by Paul Brook |
| * |
| * This code is licenced under the LGPL. |
| */ |
| |
| #include "qemu-common.h" |
| #include "usb.h" |
| #include "block.h" |
| #include "scsi-disk.h" |
| |
| //#define DEBUG_MSD |
| |
| #ifdef DEBUG_MSD |
| #define DPRINTF(fmt, args...) \ |
| do { printf("usb-msd: " fmt , ##args); } while (0) |
| #else |
| #define DPRINTF(fmt, args...) do {} while(0) |
| #endif |
| |
| /* USB requests. */ |
| #define MassStorageReset 0xff |
| #define GetMaxLun 0xfe |
| |
| enum USBMSDMode { |
| USB_MSDM_CBW, /* Command Block. */ |
| USB_MSDM_DATAOUT, /* Tranfer data to device. */ |
| USB_MSDM_DATAIN, /* Transfer data from device. */ |
| USB_MSDM_CSW /* Command Status. */ |
| }; |
| |
| typedef struct { |
| USBDevice dev; |
| enum USBMSDMode mode; |
| uint32_t scsi_len; |
| uint8_t *scsi_buf; |
| uint32_t usb_len; |
| uint8_t *usb_buf; |
| uint32_t data_len; |
| uint32_t residue; |
| uint32_t tag; |
| BlockDriverState *bs; |
| SCSIDevice *scsi_dev; |
| int result; |
| /* For async completion. */ |
| USBPacket *packet; |
| } MSDState; |
| |
| struct usb_msd_cbw { |
| uint32_t sig; |
| uint32_t tag; |
| uint32_t data_len; |
| uint8_t flags; |
| uint8_t lun; |
| uint8_t cmd_len; |
| uint8_t cmd[16]; |
| }; |
| |
| struct usb_msd_csw { |
| uint32_t sig; |
| uint32_t tag; |
| uint32_t residue; |
| uint8_t status; |
| }; |
| |
| static const uint8_t qemu_msd_dev_descriptor[] = { |
| 0x12, /* u8 bLength; */ |
| 0x01, /* u8 bDescriptorType; Device */ |
| 0x00, 0x01, /* u16 bcdUSB; v1.0 */ |
| |
| 0x00, /* u8 bDeviceClass; */ |
| 0x00, /* u8 bDeviceSubClass; */ |
| 0x00, /* u8 bDeviceProtocol; [ low/full speeds only ] */ |
| 0x08, /* u8 bMaxPacketSize0; 8 Bytes */ |
| |
| /* Vendor and product id are arbitrary. */ |
| 0x00, 0x00, /* u16 idVendor; */ |
| 0x00, 0x00, /* u16 idProduct; */ |
| 0x00, 0x00, /* u16 bcdDevice */ |
| |
| 0x01, /* u8 iManufacturer; */ |
| 0x02, /* u8 iProduct; */ |
| 0x03, /* u8 iSerialNumber; */ |
| 0x01 /* u8 bNumConfigurations; */ |
| }; |
| |
| static const uint8_t qemu_msd_config_descriptor[] = { |
| |
| /* one configuration */ |
| 0x09, /* u8 bLength; */ |
| 0x02, /* u8 bDescriptorType; Configuration */ |
| 0x20, 0x00, /* u16 wTotalLength; */ |
| 0x01, /* u8 bNumInterfaces; (1) */ |
| 0x01, /* u8 bConfigurationValue; */ |
| 0x00, /* u8 iConfiguration; */ |
| 0xc0, /* u8 bmAttributes; |
| Bit 7: must be set, |
| 6: Self-powered, |
| 5: Remote wakeup, |
| 4..0: resvd */ |
| 0x00, /* u8 MaxPower; */ |
| |
| /* one interface */ |
| 0x09, /* u8 if_bLength; */ |
| 0x04, /* u8 if_bDescriptorType; Interface */ |
| 0x00, /* u8 if_bInterfaceNumber; */ |
| 0x00, /* u8 if_bAlternateSetting; */ |
| 0x02, /* u8 if_bNumEndpoints; */ |
| 0x08, /* u8 if_bInterfaceClass; MASS STORAGE */ |
| 0x06, /* u8 if_bInterfaceSubClass; SCSI */ |
| 0x50, /* u8 if_bInterfaceProtocol; Bulk Only */ |
| 0x00, /* u8 if_iInterface; */ |
| |
| /* Bulk-In endpoint */ |
| 0x07, /* u8 ep_bLength; */ |
| 0x05, /* u8 ep_bDescriptorType; Endpoint */ |
| 0x81, /* u8 ep_bEndpointAddress; IN Endpoint 1 */ |
| 0x02, /* u8 ep_bmAttributes; Bulk */ |
| 0x40, 0x00, /* u16 ep_wMaxPacketSize; */ |
| 0x00, /* u8 ep_bInterval; */ |
| |
| /* Bulk-Out endpoint */ |
| 0x07, /* u8 ep_bLength; */ |
| 0x05, /* u8 ep_bDescriptorType; Endpoint */ |
| 0x02, /* u8 ep_bEndpointAddress; OUT Endpoint 2 */ |
| 0x02, /* u8 ep_bmAttributes; Bulk */ |
| 0x40, 0x00, /* u16 ep_wMaxPacketSize; */ |
| 0x00 /* u8 ep_bInterval; */ |
| }; |
| |
| static void usb_msd_copy_data(MSDState *s) |
| { |
| uint32_t len; |
| len = s->usb_len; |
| if (len > s->scsi_len) |
| len = s->scsi_len; |
| if (s->mode == USB_MSDM_DATAIN) { |
| memcpy(s->usb_buf, s->scsi_buf, len); |
| } else { |
| memcpy(s->scsi_buf, s->usb_buf, len); |
| } |
| s->usb_len -= len; |
| s->scsi_len -= len; |
| s->usb_buf += len; |
| s->scsi_buf += len; |
| s->data_len -= len; |
| if (s->scsi_len == 0) { |
| if (s->mode == USB_MSDM_DATAIN) { |
| s->scsi_dev->read_data(s->scsi_dev, s->tag); |
| } else if (s->mode == USB_MSDM_DATAOUT) { |
| s->scsi_dev->write_data(s->scsi_dev, s->tag); |
| } |
| } |
| } |
| |
| static void usb_msd_send_status(MSDState *s) |
| { |
| struct usb_msd_csw csw; |
| |
| csw.sig = cpu_to_le32(0x53425355); |
| csw.tag = cpu_to_le32(s->tag); |
| csw.residue = s->residue; |
| csw.status = s->result; |
| memcpy(s->usb_buf, &csw, 13); |
| } |
| |
| static void usb_msd_command_complete(void *opaque, int reason, uint32_t tag, |
| uint32_t arg) |
| { |
| MSDState *s = (MSDState *)opaque; |
| USBPacket *p = s->packet; |
| |
| if (tag != s->tag) { |
| fprintf(stderr, "usb-msd: Unexpected SCSI Tag 0x%x\n", tag); |
| } |
| if (reason == SCSI_REASON_DONE) { |
| DPRINTF("Command complete %d\n", arg); |
| s->residue = s->data_len; |
| s->result = arg != 0; |
| if (s->packet) { |
| if (s->data_len == 0 && s->mode == USB_MSDM_DATAOUT) { |
| /* A deferred packet with no write data remaining must be |
| the status read packet. */ |
| usb_msd_send_status(s); |
| s->mode = USB_MSDM_CBW; |
| } else { |
| if (s->data_len) { |
| s->data_len -= s->usb_len; |
| if (s->mode == USB_MSDM_DATAIN) |
| memset(s->usb_buf, 0, s->usb_len); |
| s->usb_len = 0; |
| } |
| if (s->data_len == 0) |
| s->mode = USB_MSDM_CSW; |
| } |
| s->packet = NULL; |
| usb_packet_complete(p); |
| } else if (s->data_len == 0) { |
| s->mode = USB_MSDM_CSW; |
| } |
| return; |
| } |
| s->scsi_len = arg; |
| s->scsi_buf = s->scsi_dev->get_buf(s->scsi_dev, tag); |
| if (p) { |
| usb_msd_copy_data(s); |
| if (s->usb_len == 0) { |
| /* Set s->packet to NULL before calling usb_packet_complete |
| because annother request may be issued before |
| usb_packet_complete returns. */ |
| DPRINTF("Packet complete %p\n", p); |
| s->packet = NULL; |
| usb_packet_complete(p); |
| } |
| } |
| } |
| |
| static void usb_msd_handle_reset(USBDevice *dev) |
| { |
| MSDState *s = (MSDState *)dev; |
| |
| DPRINTF("Reset\n"); |
| s->mode = USB_MSDM_CBW; |
| } |
| |
| static int usb_msd_handle_control(USBDevice *dev, int request, int value, |
| int index, int length, uint8_t *data) |
| { |
| MSDState *s = (MSDState *)dev; |
| int ret = 0; |
| |
| switch (request) { |
| case DeviceRequest | USB_REQ_GET_STATUS: |
| data[0] = (1 << USB_DEVICE_SELF_POWERED) | |
| (dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP); |
| data[1] = 0x00; |
| ret = 2; |
| break; |
| case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: |
| if (value == USB_DEVICE_REMOTE_WAKEUP) { |
| dev->remote_wakeup = 0; |
| } else { |
| goto fail; |
| } |
| ret = 0; |
| break; |
| case DeviceOutRequest | USB_REQ_SET_FEATURE: |
| if (value == USB_DEVICE_REMOTE_WAKEUP) { |
| dev->remote_wakeup = 1; |
| } else { |
| goto fail; |
| } |
| ret = 0; |
| break; |
| case DeviceOutRequest | USB_REQ_SET_ADDRESS: |
| dev->addr = value; |
| ret = 0; |
| break; |
| case DeviceRequest | USB_REQ_GET_DESCRIPTOR: |
| switch(value >> 8) { |
| case USB_DT_DEVICE: |
| memcpy(data, qemu_msd_dev_descriptor, |
| sizeof(qemu_msd_dev_descriptor)); |
| ret = sizeof(qemu_msd_dev_descriptor); |
| break; |
| case USB_DT_CONFIG: |
| memcpy(data, qemu_msd_config_descriptor, |
| sizeof(qemu_msd_config_descriptor)); |
| ret = sizeof(qemu_msd_config_descriptor); |
| break; |
| case USB_DT_STRING: |
| switch(value & 0xff) { |
| case 0: |
| /* language ids */ |
| data[0] = 4; |
| data[1] = 3; |
| data[2] = 0x09; |
| data[3] = 0x04; |
| ret = 4; |
| break; |
| case 1: |
| /* vendor description */ |
| ret = set_usb_string(data, "QEMU " QEMU_VERSION); |
| break; |
| case 2: |
| /* product description */ |
| ret = set_usb_string(data, "QEMU USB HARDDRIVE"); |
| break; |
| case 3: |
| /* serial number */ |
| ret = set_usb_string(data, "1"); |
| break; |
| default: |
| goto fail; |
| } |
| break; |
| default: |
| goto fail; |
| } |
| break; |
| case DeviceRequest | USB_REQ_GET_CONFIGURATION: |
| data[0] = 1; |
| ret = 1; |
| break; |
| case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: |
| ret = 0; |
| break; |
| case DeviceRequest | USB_REQ_GET_INTERFACE: |
| data[0] = 0; |
| ret = 1; |
| break; |
| case DeviceOutRequest | USB_REQ_SET_INTERFACE: |
| ret = 0; |
| break; |
| case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: |
| if (value == 0 && index != 0x81) { /* clear ep halt */ |
| goto fail; |
| } |
| ret = 0; |
| break; |
| /* Class specific requests. */ |
| case MassStorageReset: |
| /* Reset state ready for the next CBW. */ |
| s->mode = USB_MSDM_CBW; |
| ret = 0; |
| break; |
| case GetMaxLun: |
| data[0] = 0; |
| ret = 1; |
| break; |
| default: |
| fail: |
| ret = USB_RET_STALL; |
| break; |
| } |
| return ret; |
| } |
| |
| static void usb_msd_cancel_io(USBPacket *p, void *opaque) |
| { |
| MSDState *s = opaque; |
| s->scsi_dev->cancel_io(s->scsi_dev, s->tag); |
| s->packet = NULL; |
| s->scsi_len = 0; |
| } |
| |
| static int usb_msd_handle_data(USBDevice *dev, USBPacket *p) |
| { |
| MSDState *s = (MSDState *)dev; |
| int ret = 0; |
| struct usb_msd_cbw cbw; |
| uint8_t devep = p->devep; |
| uint8_t *data = p->data; |
| int len = p->len; |
| |
| switch (p->pid) { |
| case USB_TOKEN_OUT: |
| if (devep != 2) |
| goto fail; |
| |
| switch (s->mode) { |
| case USB_MSDM_CBW: |
| if (len != 31) { |
| fprintf(stderr, "usb-msd: Bad CBW size"); |
| goto fail; |
| } |
| memcpy(&cbw, data, 31); |
| if (le32_to_cpu(cbw.sig) != 0x43425355) { |
| fprintf(stderr, "usb-msd: Bad signature %08x\n", |
| le32_to_cpu(cbw.sig)); |
| goto fail; |
| } |
| DPRINTF("Command on LUN %d\n", cbw.lun); |
| if (cbw.lun != 0) { |
| fprintf(stderr, "usb-msd: Bad LUN %d\n", cbw.lun); |
| goto fail; |
| } |
| s->tag = le32_to_cpu(cbw.tag); |
| s->data_len = le32_to_cpu(cbw.data_len); |
| if (s->data_len == 0) { |
| s->mode = USB_MSDM_CSW; |
| } else if (cbw.flags & 0x80) { |
| s->mode = USB_MSDM_DATAIN; |
| } else { |
| s->mode = USB_MSDM_DATAOUT; |
| } |
| DPRINTF("Command tag 0x%x flags %08x len %d data %d\n", |
| s->tag, cbw.flags, cbw.cmd_len, s->data_len); |
| s->residue = 0; |
| s->scsi_dev->send_command(s->scsi_dev, s->tag, cbw.cmd, 0); |
| /* ??? Should check that USB and SCSI data transfer |
| directions match. */ |
| if (s->residue == 0) { |
| if (s->mode == USB_MSDM_DATAIN) { |
| s->scsi_dev->read_data(s->scsi_dev, s->tag); |
| } else if (s->mode == USB_MSDM_DATAOUT) { |
| s->scsi_dev->write_data(s->scsi_dev, s->tag); |
| } |
| } |
| ret = len; |
| break; |
| |
| case USB_MSDM_DATAOUT: |
| DPRINTF("Data out %d/%d\n", len, s->data_len); |
| if (len > s->data_len) |
| goto fail; |
| |
| s->usb_buf = data; |
| s->usb_len = len; |
| if (s->scsi_len) { |
| usb_msd_copy_data(s); |
| } |
| if (s->residue && s->usb_len) { |
| s->data_len -= s->usb_len; |
| if (s->data_len == 0) |
| s->mode = USB_MSDM_CSW; |
| s->usb_len = 0; |
| } |
| if (s->usb_len) { |
| DPRINTF("Deferring packet %p\n", p); |
| usb_defer_packet(p, usb_msd_cancel_io, s); |
| s->packet = p; |
| ret = USB_RET_ASYNC; |
| } else { |
| ret = len; |
| } |
| break; |
| |
| default: |
| DPRINTF("Unexpected write (len %d)\n", len); |
| goto fail; |
| } |
| break; |
| |
| case USB_TOKEN_IN: |
| if (devep != 1) |
| goto fail; |
| |
| switch (s->mode) { |
| case USB_MSDM_DATAOUT: |
| if (s->data_len != 0 || len < 13) |
| goto fail; |
| /* Waiting for SCSI write to complete. */ |
| usb_defer_packet(p, usb_msd_cancel_io, s); |
| s->packet = p; |
| ret = USB_RET_ASYNC; |
| break; |
| |
| case USB_MSDM_CSW: |
| DPRINTF("Command status %d tag 0x%x, len %d\n", |
| s->result, s->tag, len); |
| if (len < 13) |
| goto fail; |
| |
| s->usb_len = len; |
| s->usb_buf = data; |
| usb_msd_send_status(s); |
| s->mode = USB_MSDM_CBW; |
| ret = 13; |
| break; |
| |
| case USB_MSDM_DATAIN: |
| DPRINTF("Data in %d/%d\n", len, s->data_len); |
| if (len > s->data_len) |
| len = s->data_len; |
| s->usb_buf = data; |
| s->usb_len = len; |
| if (s->scsi_len) { |
| usb_msd_copy_data(s); |
| } |
| if (s->residue && s->usb_len) { |
| s->data_len -= s->usb_len; |
| memset(s->usb_buf, 0, s->usb_len); |
| if (s->data_len == 0) |
| s->mode = USB_MSDM_CSW; |
| s->usb_len = 0; |
| } |
| if (s->usb_len) { |
| DPRINTF("Deferring packet %p\n", p); |
| usb_defer_packet(p, usb_msd_cancel_io, s); |
| s->packet = p; |
| ret = USB_RET_ASYNC; |
| } else { |
| ret = len; |
| } |
| break; |
| |
| default: |
| DPRINTF("Unexpected read (len %d)\n", len); |
| goto fail; |
| } |
| break; |
| |
| default: |
| DPRINTF("Bad token\n"); |
| fail: |
| ret = USB_RET_STALL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static void usb_msd_handle_destroy(USBDevice *dev) |
| { |
| MSDState *s = (MSDState *)dev; |
| |
| s->scsi_dev->destroy(s->scsi_dev); |
| bdrv_delete(s->bs); |
| qemu_free(s); |
| } |
| |
| USBDevice *usb_msd_init(const char *filename) |
| { |
| MSDState *s; |
| BlockDriverState *bdrv; |
| |
| s = qemu_mallocz(sizeof(MSDState)); |
| if (!s) |
| return NULL; |
| |
| bdrv = bdrv_new("usb"); |
| if (bdrv_open(bdrv, filename, 0) < 0) |
| goto fail; |
| if (qemu_key_check(bdrv, filename)) |
| goto fail; |
| s->bs = bdrv; |
| |
| s->dev.speed = USB_SPEED_FULL; |
| s->dev.handle_packet = usb_generic_handle_packet; |
| |
| s->dev.handle_reset = usb_msd_handle_reset; |
| s->dev.handle_control = usb_msd_handle_control; |
| s->dev.handle_data = usb_msd_handle_data; |
| s->dev.handle_destroy = usb_msd_handle_destroy; |
| |
| snprintf(s->dev.devname, sizeof(s->dev.devname), "QEMU USB MSD(%.16s)", |
| filename); |
| |
| s->scsi_dev = scsi_disk_init(bdrv, 0, usb_msd_command_complete, s); |
| usb_msd_handle_reset((USBDevice *)s); |
| return (USBDevice *)s; |
| fail: |
| qemu_free(s); |
| return NULL; |
| } |