blob: 8c7a072f08a247abb49a2b6d516e69d86ce90fc7 [file] [log] [blame]
# -*- Mode: makefile -*-
BUILD_DIR?=$(CURDIR)/..
include ../config-host.mak
include config-target.mak
include config-devices.mak
include $(SRC_PATH)/rules.mak
$(call set-vpath, $(SRC_PATH):$(BUILD_DIR))
ifdef CONFIG_LINUX
QEMU_CFLAGS += -I../linux-headers
endif
QEMU_CFLAGS += -I.. -I$(SRC_PATH)/target-$(TARGET_BASE_ARCH) -DNEED_CPU_H
QEMU_CFLAGS+=-I$(SRC_PATH)/include
ifdef CONFIG_USER_ONLY
# user emulator name
QEMU_PROG=qemu-$(TARGET_NAME)
QEMU_PROG_BUILD = $(QEMU_PROG)
else
# system emulator name
QEMU_PROG=qemu-system-$(TARGET_NAME)$(EXESUF)
ifneq (,$(findstring -mwindows,$(libs_softmmu)))
# Terminate program name with a 'w' because the linker builds a windows executable.
QEMU_PROGW=qemu-system-$(TARGET_NAME)w$(EXESUF)
$(QEMU_PROG): $(QEMU_PROGW)
$(call quiet-command,$(OBJCOPY) --subsystem console $(QEMU_PROGW) $(QEMU_PROG)," GEN $(TARGET_DIR)$(QEMU_PROG)")
QEMU_PROG_BUILD = $(QEMU_PROGW)
else
QEMU_PROG_BUILD = $(QEMU_PROG)
endif
endif
PROGS=$(QEMU_PROG) $(QEMU_PROGW)
STPFILES=
config-target.h: config-target.h-timestamp
config-target.h-timestamp: config-target.mak
ifdef CONFIG_TRACE_SYSTEMTAP
stap: $(QEMU_PROG).stp-installed $(QEMU_PROG).stp $(QEMU_PROG)-simpletrace.stp
ifdef CONFIG_USER_ONLY
TARGET_TYPE=user
else
TARGET_TYPE=system
endif
$(QEMU_PROG).stp-installed: $(BUILD_DIR)/trace-events-all
$(call quiet-command,$(TRACETOOL) \
--format=stap \
--backends=$(TRACE_BACKENDS) \
--binary=$(bindir)/$(QEMU_PROG) \
--target-name=$(TARGET_NAME) \
--target-type=$(TARGET_TYPE) \
< $< > $@," GEN $(TARGET_DIR)$(QEMU_PROG).stp-installed")
$(QEMU_PROG).stp: $(BUILD_DIR)/trace-events-all
$(call quiet-command,$(TRACETOOL) \
--format=stap \
--backends=$(TRACE_BACKENDS) \
--binary=$(realpath .)/$(QEMU_PROG) \
--target-name=$(TARGET_NAME) \
--target-type=$(TARGET_TYPE) \
< $< > $@," GEN $(TARGET_DIR)$(QEMU_PROG).stp")
$(QEMU_PROG)-simpletrace.stp: $(BUILD_DIR)/trace-events-all
$(call quiet-command,$(TRACETOOL) \
--format=simpletrace-stap \
--backends=$(TRACE_BACKENDS) \
--probe-prefix=qemu.$(TARGET_TYPE).$(TARGET_NAME) \
< $< > $@," GEN $(TARGET_DIR)$(QEMU_PROG)-simpletrace.stp")
else
stap:
endif
all: $(PROGS) stap
# Dummy command so that make thinks it has done something
@true
#########################################################
# cpu emulator library
obj-y = exec.o translate-all.o cpu-exec.o
obj-y += translate-common.o
obj-y += cpu-exec-common.o
obj-y += tcg/tcg.o tcg/tcg-op.o tcg/optimize.o
obj-$(CONFIG_TCG_INTERPRETER) += tci.o
obj-y += tcg/tcg-common.o
obj-$(CONFIG_TCG_INTERPRETER) += disas/tci.o
obj-y += fpu/softfloat.o
obj-y += target-$(TARGET_BASE_ARCH)/
obj-y += disas.o
obj-$(call notempty,$(TARGET_XML_FILES)) += gdbstub-xml.o
obj-$(call lnot,$(CONFIG_KVM)) += kvm-stub.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/decContext.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/decNumber.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/dpd/decimal32.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/dpd/decimal64.o
obj-$(CONFIG_LIBDECNUMBER) += libdecnumber/dpd/decimal128.o
#########################################################
# Linux user emulator target
ifdef CONFIG_LINUX_USER
QEMU_CFLAGS+=-I$(SRC_PATH)/linux-user/$(TARGET_ABI_DIR) \
-I$(SRC_PATH)/linux-user/host/$(ARCH) \
-I$(SRC_PATH)/linux-user
obj-y += linux-user/
obj-y += gdbstub.o thunk.o user-exec.o
endif #CONFIG_LINUX_USER
#########################################################
# BSD user emulator target
ifdef CONFIG_BSD_USER
QEMU_CFLAGS+=-I$(SRC_PATH)/bsd-user -I$(SRC_PATH)/bsd-user/$(TARGET_ABI_DIR) \
-I$(SRC_PATH)/bsd-user/$(HOST_VARIANT_DIR)
obj-y += bsd-user/
obj-y += gdbstub.o user-exec.o
endif #CONFIG_BSD_USER
#########################################################
# System emulator target
ifdef CONFIG_SOFTMMU
obj-y += arch_init.o cpus.o monitor.o gdbstub.o balloon.o ioport.o numa.o
obj-y += qtest.o bootdevice.o
obj-y += hw/
obj-$(CONFIG_KVM) += kvm-all.o
obj-y += memory.o cputlb.o
obj-y += memory_mapping.o
obj-y += dump.o
obj-y += migration/ram.o migration/savevm.o
LIBS := $(libs_softmmu) $(LIBS)
# xen support
obj-$(CONFIG_XEN) += xen-common.o
obj-$(CONFIG_XEN_I386) += xen-hvm.o xen-mapcache.o
obj-$(call lnot,$(CONFIG_XEN)) += xen-common-stub.o
obj-$(call lnot,$(CONFIG_XEN_I386)) += xen-hvm-stub.o
# Hardware support
ifeq ($(TARGET_NAME), sparc64)
obj-y += hw/sparc64/
else
obj-y += hw/$(TARGET_BASE_ARCH)/
endif
GENERATED_HEADERS += hmp-commands.h hmp-commands-info.h qmp-commands-old.h
endif # CONFIG_SOFTMMU
# Workaround for http://gcc.gnu.org/PR55489, see configure.
%/translate.o: QEMU_CFLAGS += $(TRANSLATE_OPT_CFLAGS)
dummy := $(call unnest-vars,,obj-y)
all-obj-y := $(obj-y)
target-obj-y :=
block-obj-y :=
common-obj-y :=
include $(SRC_PATH)/Makefile.objs
dummy := $(call unnest-vars,,target-obj-y)
target-obj-y-save := $(target-obj-y)
dummy := $(call unnest-vars,.., \
block-obj-y \
block-obj-m \
crypto-obj-y \
crypto-aes-obj-y \
qom-obj-y \
io-obj-y \
common-obj-y \
common-obj-m)
target-obj-y := $(target-obj-y-save)
all-obj-y += $(common-obj-y)
all-obj-y += $(target-obj-y)
all-obj-y += $(qom-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(block-obj-y)
all-obj-$(CONFIG_USER_ONLY) += $(crypto-aes-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(crypto-obj-y)
all-obj-$(CONFIG_SOFTMMU) += $(io-obj-y)
$(QEMU_PROG_BUILD): config-devices.mak
# build either PROG or PROGW
$(QEMU_PROG_BUILD): $(all-obj-y) ../libqemuutil.a ../libqemustub.a
$(call LINK, $(filter-out %.mak, $^))
ifdef CONFIG_DARWIN
$(call quiet-command,Rez -append $(SRC_PATH)/pc-bios/qemu.rsrc -o $@," REZ $(TARGET_DIR)$@")
$(call quiet-command,SetFile -a C $@," SETFILE $(TARGET_DIR)$@")
endif
gdbstub-xml.c: $(TARGET_XML_FILES) $(SRC_PATH)/scripts/feature_to_c.sh
$(call quiet-command,rm -f $@ && $(SHELL) $(SRC_PATH)/scripts/feature_to_c.sh $@ $(TARGET_XML_FILES)," GEN $(TARGET_DIR)$@")
hmp-commands.h: $(SRC_PATH)/hmp-commands.hx $(SRC_PATH)/scripts/hxtool
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
hmp-commands-info.h: $(SRC_PATH)/hmp-commands-info.hx $(SRC_PATH)/scripts/hxtool
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
qmp-commands-old.h: $(SRC_PATH)/qmp-commands.hx $(SRC_PATH)/scripts/hxtool
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $(TARGET_DIR)$@")
clean: clean-target
rm -f *.a *~ $(PROGS)
rm -f $(shell find . -name '*.[od]')
rm -f hmp-commands.h qmp-commands-old.h gdbstub-xml.c
ifdef CONFIG_TRACE_SYSTEMTAP
rm -f *.stp
endif
install: all
ifneq ($(PROGS),)
$(call install-prog,$(PROGS),$(DESTDIR)$(bindir))
endif
ifdef CONFIG_TRACE_SYSTEMTAP
$(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset"
$(INSTALL_DATA) $(QEMU_PROG).stp-installed "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG).stp"
$(INSTALL_DATA) $(QEMU_PROG)-simpletrace.stp "$(DESTDIR)$(qemu_datadir)/../systemtap/tapset/$(QEMU_PROG)-simpletrace.stp"
endif
GENERATED_HEADERS += config-target.h
Makefile: $(GENERATED_HEADERS)