| /* |
| * QEMU sPAPR PCI host for VFIO |
| * |
| * Copyright (c) 2011-2014 Alexey Kardashevskiy, IBM Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, |
| * or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "hw/ppc/spapr.h" |
| #include "hw/pci-host/spapr.h" |
| #include "linux/vfio.h" |
| #include "hw/vfio/vfio.h" |
| |
| static Property spapr_phb_vfio_properties[] = { |
| DEFINE_PROP_INT32("iommu", sPAPRPHBVFIOState, iommugroupid, -1), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void spapr_phb_vfio_finish_realize(sPAPRPHBState *sphb, Error **errp) |
| { |
| sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb); |
| struct vfio_iommu_spapr_tce_info info = { .argsz = sizeof(info) }; |
| int ret; |
| sPAPRTCETable *tcet; |
| uint32_t liobn = svphb->phb.dma_liobn; |
| |
| if (svphb->iommugroupid == -1) { |
| error_setg(errp, "Wrong IOMMU group ID %d", svphb->iommugroupid); |
| return; |
| } |
| |
| ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid, |
| VFIO_CHECK_EXTENSION, |
| (void *) VFIO_SPAPR_TCE_IOMMU); |
| if (ret != 1) { |
| error_setg_errno(errp, -ret, |
| "spapr-vfio: SPAPR extension is not supported"); |
| return; |
| } |
| |
| ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid, |
| VFIO_IOMMU_SPAPR_TCE_GET_INFO, &info); |
| if (ret) { |
| error_setg_errno(errp, -ret, |
| "spapr-vfio: get info from container failed"); |
| return; |
| } |
| |
| tcet = spapr_tce_new_table(DEVICE(sphb), liobn, info.dma32_window_start, |
| SPAPR_TCE_PAGE_SHIFT, |
| info.dma32_window_size >> SPAPR_TCE_PAGE_SHIFT, |
| true); |
| if (!tcet) { |
| error_setg(errp, "spapr-vfio: failed to create VFIO TCE table"); |
| return; |
| } |
| |
| /* Register default 32bit DMA window */ |
| memory_region_add_subregion(&sphb->iommu_root, tcet->bus_offset, |
| spapr_tce_get_iommu(tcet)); |
| } |
| |
| static void spapr_phb_vfio_reset(DeviceState *qdev) |
| { |
| /* Do nothing */ |
| } |
| |
| static int spapr_phb_vfio_eeh_set_option(sPAPRPHBState *sphb, |
| unsigned int addr, int option) |
| { |
| sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb); |
| struct vfio_eeh_pe_op op = { .argsz = sizeof(op) }; |
| int ret; |
| |
| switch (option) { |
| case RTAS_EEH_DISABLE: |
| op.op = VFIO_EEH_PE_DISABLE; |
| break; |
| case RTAS_EEH_ENABLE: { |
| PCIHostState *phb; |
| PCIDevice *pdev; |
| |
| /* |
| * The EEH functionality is enabled on basis of PCI device, |
| * instead of PE. We need check the validity of the PCI |
| * device address. |
| */ |
| phb = PCI_HOST_BRIDGE(sphb); |
| pdev = pci_find_device(phb->bus, |
| (addr >> 16) & 0xFF, (addr >> 8) & 0xFF); |
| if (!pdev) { |
| return RTAS_OUT_PARAM_ERROR; |
| } |
| |
| op.op = VFIO_EEH_PE_ENABLE; |
| break; |
| } |
| case RTAS_EEH_THAW_IO: |
| op.op = VFIO_EEH_PE_UNFREEZE_IO; |
| break; |
| case RTAS_EEH_THAW_DMA: |
| op.op = VFIO_EEH_PE_UNFREEZE_DMA; |
| break; |
| default: |
| return RTAS_OUT_PARAM_ERROR; |
| } |
| |
| ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid, |
| VFIO_EEH_PE_OP, &op); |
| if (ret < 0) { |
| return RTAS_OUT_HW_ERROR; |
| } |
| |
| return RTAS_OUT_SUCCESS; |
| } |
| |
| static int spapr_phb_vfio_eeh_get_state(sPAPRPHBState *sphb, int *state) |
| { |
| sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb); |
| struct vfio_eeh_pe_op op = { .argsz = sizeof(op) }; |
| int ret; |
| |
| op.op = VFIO_EEH_PE_GET_STATE; |
| ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid, |
| VFIO_EEH_PE_OP, &op); |
| if (ret < 0) { |
| return RTAS_OUT_PARAM_ERROR; |
| } |
| |
| *state = ret; |
| return RTAS_OUT_SUCCESS; |
| } |
| |
| static int spapr_phb_vfio_eeh_reset(sPAPRPHBState *sphb, int option) |
| { |
| sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb); |
| struct vfio_eeh_pe_op op = { .argsz = sizeof(op) }; |
| int ret; |
| |
| switch (option) { |
| case RTAS_SLOT_RESET_DEACTIVATE: |
| op.op = VFIO_EEH_PE_RESET_DEACTIVATE; |
| break; |
| case RTAS_SLOT_RESET_HOT: |
| op.op = VFIO_EEH_PE_RESET_HOT; |
| break; |
| case RTAS_SLOT_RESET_FUNDAMENTAL: |
| op.op = VFIO_EEH_PE_RESET_FUNDAMENTAL; |
| break; |
| default: |
| return RTAS_OUT_PARAM_ERROR; |
| } |
| |
| ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid, |
| VFIO_EEH_PE_OP, &op); |
| if (ret < 0) { |
| return RTAS_OUT_HW_ERROR; |
| } |
| |
| return RTAS_OUT_SUCCESS; |
| } |
| |
| static int spapr_phb_vfio_eeh_configure(sPAPRPHBState *sphb) |
| { |
| sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb); |
| struct vfio_eeh_pe_op op = { .argsz = sizeof(op) }; |
| int ret; |
| |
| op.op = VFIO_EEH_PE_CONFIGURE; |
| ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid, |
| VFIO_EEH_PE_OP, &op); |
| if (ret < 0) { |
| return RTAS_OUT_PARAM_ERROR; |
| } |
| |
| return RTAS_OUT_SUCCESS; |
| } |
| |
| static void spapr_phb_vfio_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| sPAPRPHBClass *spc = SPAPR_PCI_HOST_BRIDGE_CLASS(klass); |
| |
| dc->props = spapr_phb_vfio_properties; |
| dc->reset = spapr_phb_vfio_reset; |
| spc->finish_realize = spapr_phb_vfio_finish_realize; |
| spc->eeh_set_option = spapr_phb_vfio_eeh_set_option; |
| spc->eeh_get_state = spapr_phb_vfio_eeh_get_state; |
| spc->eeh_reset = spapr_phb_vfio_eeh_reset; |
| spc->eeh_configure = spapr_phb_vfio_eeh_configure; |
| } |
| |
| static const TypeInfo spapr_phb_vfio_info = { |
| .name = TYPE_SPAPR_PCI_VFIO_HOST_BRIDGE, |
| .parent = TYPE_SPAPR_PCI_HOST_BRIDGE, |
| .instance_size = sizeof(sPAPRPHBVFIOState), |
| .class_init = spapr_phb_vfio_class_init, |
| .class_size = sizeof(sPAPRPHBClass), |
| }; |
| |
| static void spapr_pci_vfio_register_types(void) |
| { |
| type_register_static(&spapr_phb_vfio_info); |
| } |
| |
| type_init(spapr_pci_vfio_register_types) |