| /* |
| * IMX7 System Reset Controller |
| * |
| * Copyright (c) 2023 Jean-Christophe Dubois <jcd@tribudubois.net> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| * |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/misc/imx7_src.h" |
| #include "migration/vmstate.h" |
| #include "qemu/bitops.h" |
| #include "qemu/log.h" |
| #include "qemu/main-loop.h" |
| #include "qemu/module.h" |
| #include "target/arm/arm-powerctl.h" |
| #include "hw/core/cpu.h" |
| #include "hw/registerfields.h" |
| |
| #include "trace.h" |
| |
| static const char *imx7_src_reg_name(uint32_t reg) |
| { |
| static char unknown[20]; |
| |
| switch (reg) { |
| case SRC_SCR: |
| return "SRC_SCR"; |
| case SRC_A7RCR0: |
| return "SRC_A7RCR0"; |
| case SRC_A7RCR1: |
| return "SRC_A7RCR1"; |
| case SRC_M4RCR: |
| return "SRC_M4RCR"; |
| case SRC_ERCR: |
| return "SRC_ERCR"; |
| case SRC_HSICPHY_RCR: |
| return "SRC_HSICPHY_RCR"; |
| case SRC_USBOPHY1_RCR: |
| return "SRC_USBOPHY1_RCR"; |
| case SRC_USBOPHY2_RCR: |
| return "SRC_USBOPHY2_RCR"; |
| case SRC_PCIEPHY_RCR: |
| return "SRC_PCIEPHY_RCR"; |
| case SRC_SBMR1: |
| return "SRC_SBMR1"; |
| case SRC_SRSR: |
| return "SRC_SRSR"; |
| case SRC_SISR: |
| return "SRC_SISR"; |
| case SRC_SIMR: |
| return "SRC_SIMR"; |
| case SRC_SBMR2: |
| return "SRC_SBMR2"; |
| case SRC_GPR1: |
| return "SRC_GPR1"; |
| case SRC_GPR2: |
| return "SRC_GPR2"; |
| case SRC_GPR3: |
| return "SRC_GPR3"; |
| case SRC_GPR4: |
| return "SRC_GPR4"; |
| case SRC_GPR5: |
| return "SRC_GPR5"; |
| case SRC_GPR6: |
| return "SRC_GPR6"; |
| case SRC_GPR7: |
| return "SRC_GPR7"; |
| case SRC_GPR8: |
| return "SRC_GPR8"; |
| case SRC_GPR9: |
| return "SRC_GPR9"; |
| case SRC_GPR10: |
| return "SRC_GPR10"; |
| default: |
| snprintf(unknown, sizeof(unknown), "%u ?", reg); |
| return unknown; |
| } |
| } |
| |
| static const VMStateDescription vmstate_imx7_src = { |
| .name = TYPE_IMX7_SRC, |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .fields = (const VMStateField[]) { |
| VMSTATE_UINT32_ARRAY(regs, IMX7SRCState, SRC_MAX), |
| VMSTATE_END_OF_LIST() |
| }, |
| }; |
| |
| static void imx7_src_reset(DeviceState *dev) |
| { |
| IMX7SRCState *s = IMX7_SRC(dev); |
| |
| memset(s->regs, 0, sizeof(s->regs)); |
| |
| /* Set reset values */ |
| s->regs[SRC_SCR] = 0xA0; |
| s->regs[SRC_SRSR] = 0x1; |
| s->regs[SRC_SIMR] = 0x1F; |
| } |
| |
| static uint64_t imx7_src_read(void *opaque, hwaddr offset, unsigned size) |
| { |
| uint32_t value = 0; |
| IMX7SRCState *s = (IMX7SRCState *)opaque; |
| uint32_t index = offset >> 2; |
| |
| if (index < SRC_MAX) { |
| value = s->regs[index]; |
| } else { |
| qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" |
| HWADDR_PRIx "\n", TYPE_IMX7_SRC, __func__, offset); |
| } |
| |
| trace_imx7_src_read(imx7_src_reg_name(index), value); |
| |
| return value; |
| } |
| |
| |
| /* |
| * The reset is asynchronous so we need to defer clearing the reset |
| * bit until the work is completed. |
| */ |
| |
| struct SRCSCRResetInfo { |
| IMX7SRCState *s; |
| uint32_t reset_bit; |
| }; |
| |
| static void imx7_clear_reset_bit(CPUState *cpu, run_on_cpu_data data) |
| { |
| struct SRCSCRResetInfo *ri = data.host_ptr; |
| IMX7SRCState *s = ri->s; |
| |
| assert(bql_locked()); |
| |
| s->regs[SRC_A7RCR0] = deposit32(s->regs[SRC_A7RCR0], ri->reset_bit, 1, 0); |
| |
| trace_imx7_src_write(imx7_src_reg_name(SRC_A7RCR0), s->regs[SRC_A7RCR0]); |
| |
| g_free(ri); |
| } |
| |
| static void imx7_defer_clear_reset_bit(uint32_t cpuid, |
| IMX7SRCState *s, |
| uint32_t reset_shift) |
| { |
| struct SRCSCRResetInfo *ri; |
| CPUState *cpu = arm_get_cpu_by_id(cpuid); |
| |
| if (!cpu) { |
| return; |
| } |
| |
| ri = g_new(struct SRCSCRResetInfo, 1); |
| ri->s = s; |
| ri->reset_bit = reset_shift; |
| |
| async_run_on_cpu(cpu, imx7_clear_reset_bit, RUN_ON_CPU_HOST_PTR(ri)); |
| } |
| |
| |
| static void imx7_src_write(void *opaque, hwaddr offset, uint64_t value, |
| unsigned size) |
| { |
| IMX7SRCState *s = (IMX7SRCState *)opaque; |
| uint32_t index = offset >> 2; |
| long unsigned int change_mask; |
| uint32_t current_value = value; |
| |
| if (index >= SRC_MAX) { |
| qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%" |
| HWADDR_PRIx "\n", TYPE_IMX7_SRC, __func__, offset); |
| return; |
| } |
| |
| trace_imx7_src_write(imx7_src_reg_name(SRC_A7RCR0), s->regs[SRC_A7RCR0]); |
| |
| change_mask = s->regs[index] ^ (uint32_t)current_value; |
| |
| switch (index) { |
| case SRC_A7RCR0: |
| if (FIELD_EX32(change_mask, CORE0, RST)) { |
| arm_reset_cpu(0); |
| imx7_defer_clear_reset_bit(0, s, R_CORE0_RST_SHIFT); |
| } |
| if (FIELD_EX32(change_mask, CORE1, RST)) { |
| arm_reset_cpu(1); |
| imx7_defer_clear_reset_bit(1, s, R_CORE1_RST_SHIFT); |
| } |
| s->regs[index] = current_value; |
| break; |
| case SRC_A7RCR1: |
| /* |
| * On real hardware when the system reset controller starts a |
| * secondary CPU it runs through some boot ROM code which reads |
| * the SRC_GPRX registers controlling the start address and branches |
| * to it. |
| * Here we are taking a short cut and branching directly to the |
| * requested address (we don't want to run the boot ROM code inside |
| * QEMU) |
| */ |
| if (FIELD_EX32(change_mask, CORE1, ENABLE)) { |
| if (FIELD_EX32(current_value, CORE1, ENABLE)) { |
| /* CORE 1 is brought up */ |
| arm_set_cpu_on(1, s->regs[SRC_GPR3], s->regs[SRC_GPR4], |
| 3, false); |
| } else { |
| /* CORE 1 is shut down */ |
| arm_set_cpu_off(1); |
| } |
| /* We clear the reset bits as the processor changed state */ |
| imx7_defer_clear_reset_bit(1, s, R_CORE1_RST_SHIFT); |
| clear_bit(R_CORE1_RST_SHIFT, &change_mask); |
| } |
| s->regs[index] = current_value; |
| break; |
| default: |
| s->regs[index] = current_value; |
| break; |
| } |
| } |
| |
| static const struct MemoryRegionOps imx7_src_ops = { |
| .read = imx7_src_read, |
| .write = imx7_src_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| .valid = { |
| /* |
| * Our device would not work correctly if the guest was doing |
| * unaligned access. This might not be a limitation on the real |
| * device but in practice there is no reason for a guest to access |
| * this device unaligned. |
| */ |
| .min_access_size = 4, |
| .max_access_size = 4, |
| .unaligned = false, |
| }, |
| }; |
| |
| static void imx7_src_realize(DeviceState *dev, Error **errp) |
| { |
| IMX7SRCState *s = IMX7_SRC(dev); |
| |
| memory_region_init_io(&s->iomem, OBJECT(dev), &imx7_src_ops, s, |
| TYPE_IMX7_SRC, 0x1000); |
| sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem); |
| } |
| |
| static void imx7_src_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = imx7_src_realize; |
| device_class_set_legacy_reset(dc, imx7_src_reset); |
| dc->vmsd = &vmstate_imx7_src; |
| dc->desc = "i.MX6 System Reset Controller"; |
| } |
| |
| static const TypeInfo imx7_src_info = { |
| .name = TYPE_IMX7_SRC, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(IMX7SRCState), |
| .class_init = imx7_src_class_init, |
| }; |
| |
| static void imx7_src_register_types(void) |
| { |
| type_register_static(&imx7_src_info); |
| } |
| |
| type_init(imx7_src_register_types) |