| /* |
| * QEMU ETRAX System Emulator |
| * |
| * Copyright (c) 2007 Edgar E. Iglesias, Axis Communications AB. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| |
| #include <stdio.h> |
| #include <ctype.h> |
| #include "hw.h" |
| #include "qemu-char.h" |
| |
| #define D(x) |
| |
| #define RW_TR_CTRL 0x00 |
| #define RW_TR_DMA_EN 0x04 |
| #define RW_REC_CTRL 0x08 |
| #define RW_DOUT 0x1c |
| #define RS_STAT_DIN 0x20 |
| #define R_STAT_DIN 0x24 |
| #define RW_INTR_MASK 0x2c |
| #define RW_ACK_INTR 0x30 |
| #define R_INTR 0x34 |
| #define R_MASKED_INTR 0x38 |
| |
| #define STAT_DAV 16 |
| #define STAT_TR_IDLE 22 |
| #define STAT_TR_RDY 24 |
| |
| struct etrax_serial_t |
| { |
| CPUState *env; |
| CharDriverState *chr; |
| qemu_irq *irq; |
| |
| int pending_tx; |
| |
| /* Control registers. */ |
| uint32_t rw_tr_ctrl; |
| uint32_t rw_tr_dma_en; |
| uint32_t rw_rec_ctrl; |
| uint32_t rs_stat_din; |
| uint32_t r_stat_din; |
| uint32_t rw_intr_mask; |
| uint32_t rw_ack_intr; |
| uint32_t r_intr; |
| uint32_t r_masked_intr; |
| }; |
| |
| static void ser_update_irq(struct etrax_serial_t *s) |
| { |
| uint32_t o_irq = s->r_masked_intr; |
| |
| s->r_intr &= ~(s->rw_ack_intr); |
| s->r_masked_intr = s->r_intr & s->rw_intr_mask; |
| |
| if (o_irq != s->r_masked_intr) { |
| D(printf("irq_mask=%x r_intr=%x rmi=%x airq=%x \n", |
| s->rw_intr_mask, s->r_intr, |
| s->r_masked_intr, s->rw_ack_intr)); |
| if (s->r_masked_intr) |
| qemu_irq_raise(s->irq[0]); |
| else |
| qemu_irq_lower(s->irq[0]); |
| } |
| s->rw_ack_intr = 0; |
| } |
| |
| |
| static uint32_t ser_readb (void *opaque, target_phys_addr_t addr) |
| { |
| D(CPUState *env = opaque); |
| D(printf ("%s %x\n", __func__, addr)); |
| return 0; |
| } |
| |
| static uint32_t ser_readl (void *opaque, target_phys_addr_t addr) |
| { |
| struct etrax_serial_t *s = opaque; |
| D(CPUState *env = s->env); |
| uint32_t r = 0; |
| |
| switch (addr) |
| { |
| case RW_TR_CTRL: |
| r = s->rw_tr_ctrl; |
| break; |
| case RW_TR_DMA_EN: |
| r = s->rw_tr_dma_en; |
| break; |
| case RS_STAT_DIN: |
| r = s->rs_stat_din; |
| /* clear dav. */ |
| s->rs_stat_din &= ~(1 << STAT_DAV); |
| break; |
| case R_STAT_DIN: |
| r = s->rs_stat_din; |
| break; |
| case RW_ACK_INTR: |
| D(printf("load rw_ack_intr=%x\n", s->rw_ack_intr)); |
| r = s->rw_ack_intr; |
| break; |
| case RW_INTR_MASK: |
| r = s->rw_intr_mask; |
| break; |
| case R_INTR: |
| D(printf("load r_intr=%x\n", s->r_intr)); |
| r = s->r_intr; |
| break; |
| case R_MASKED_INTR: |
| D(printf("load r_maked_intr=%x\n", s->r_masked_intr)); |
| r = s->r_masked_intr; |
| break; |
| |
| default: |
| D(printf ("%s %x\n", __func__, addr)); |
| break; |
| } |
| return r; |
| } |
| |
| static void |
| ser_writeb (void *opaque, target_phys_addr_t addr, uint32_t value) |
| { |
| D(struct etrax_serial_t *s = opaque); |
| D(CPUState *env = s->env); |
| D(printf ("%s %x %x\n", __func__, addr, value)); |
| } |
| static void |
| ser_writel (void *opaque, target_phys_addr_t addr, uint32_t value) |
| { |
| struct etrax_serial_t *s = opaque; |
| unsigned char ch = value; |
| D(CPUState *env = s->env); |
| |
| switch (addr) |
| { |
| case RW_TR_CTRL: |
| D(printf("rw_tr_ctrl=%x\n", value)); |
| s->rw_tr_ctrl = value; |
| break; |
| case RW_TR_DMA_EN: |
| D(printf("rw_tr_dma_en=%x\n", value)); |
| s->rw_tr_dma_en = value; |
| break; |
| case RW_DOUT: |
| qemu_chr_write(s->chr, &ch, 1); |
| s->r_intr |= 1; |
| s->pending_tx = 1; |
| break; |
| case RW_ACK_INTR: |
| D(printf("rw_ack_intr=%x\n", value)); |
| s->rw_ack_intr = value; |
| if (s->pending_tx && (s->rw_ack_intr & 1)) { |
| s->r_intr |= 1; |
| s->pending_tx = 0; |
| s->rw_ack_intr &= ~1; |
| } |
| break; |
| case RW_INTR_MASK: |
| D(printf("r_intr_mask=%x\n", value)); |
| s->rw_intr_mask = value; |
| break; |
| default: |
| D(printf ("%s %x %x\n", __func__, addr, value)); |
| break; |
| } |
| ser_update_irq(s); |
| } |
| |
| static CPUReadMemoryFunc *ser_read[] = { |
| &ser_readb, |
| &ser_readb, |
| &ser_readl, |
| }; |
| |
| static CPUWriteMemoryFunc *ser_write[] = { |
| &ser_writeb, |
| &ser_writeb, |
| &ser_writel, |
| }; |
| |
| static void serial_receive(void *opaque, const uint8_t *buf, int size) |
| { |
| struct etrax_serial_t *s = opaque; |
| |
| s->r_intr |= 8; |
| s->rs_stat_din &= ~0xff; |
| s->rs_stat_din |= (buf[0] & 0xff); |
| s->rs_stat_din |= (1 << STAT_DAV); /* dav. */ |
| ser_update_irq(s); |
| } |
| |
| static int serial_can_receive(void *opaque) |
| { |
| struct etrax_serial_t *s = opaque; |
| int r; |
| |
| /* Is the receiver enabled? */ |
| r = s->rw_rec_ctrl & 1; |
| |
| /* Pending rx data? */ |
| r |= !(s->r_intr & 8); |
| return r; |
| } |
| |
| static void serial_event(void *opaque, int event) |
| { |
| |
| } |
| |
| void etraxfs_ser_init(CPUState *env, qemu_irq *irq, CharDriverState *chr, |
| target_phys_addr_t base) |
| { |
| struct etrax_serial_t *s; |
| int ser_regs; |
| |
| s = qemu_mallocz(sizeof *s); |
| if (!s) |
| return; |
| |
| s->env = env; |
| s->irq = irq; |
| s->chr = chr; |
| |
| /* transmitter begins ready and idle. */ |
| s->rs_stat_din |= (1 << STAT_TR_RDY); |
| s->rs_stat_din |= (1 << STAT_TR_IDLE); |
| |
| qemu_chr_add_handlers(chr, serial_can_receive, serial_receive, |
| serial_event, s); |
| |
| ser_regs = cpu_register_io_memory(0, ser_read, ser_write, s); |
| cpu_register_physical_memory (base, 0x3c, ser_regs); |
| } |