| /* |
| * Calxeda Highbank SoC emulation |
| * |
| * Copyright (c) 2010-2012 Calxeda |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms and conditions of the GNU General Public License, |
| * version 2 or later, as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| * |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu-common.h" |
| #include "qapi/error.h" |
| #include "hw/sysbus.h" |
| #include "migration/vmstate.h" |
| #include "hw/arm/boot.h" |
| #include "hw/loader.h" |
| #include "net/net.h" |
| #include "sysemu/kvm.h" |
| #include "sysemu/runstate.h" |
| #include "sysemu/sysemu.h" |
| #include "hw/boards.h" |
| #include "exec/address-spaces.h" |
| #include "qemu/error-report.h" |
| #include "hw/char/pl011.h" |
| #include "hw/ide/ahci.h" |
| #include "hw/cpu/a9mpcore.h" |
| #include "hw/cpu/a15mpcore.h" |
| #include "qemu/log.h" |
| |
| #define SMP_BOOT_ADDR 0x100 |
| #define SMP_BOOT_REG 0x40 |
| #define MPCORE_PERIPHBASE 0xfff10000 |
| |
| #define MVBAR_ADDR 0x200 |
| #define BOARD_SETUP_ADDR (MVBAR_ADDR + 8 * sizeof(uint32_t)) |
| |
| #define NIRQ_GIC 160 |
| |
| /* Board init. */ |
| |
| static void hb_write_board_setup(ARMCPU *cpu, |
| const struct arm_boot_info *info) |
| { |
| arm_write_secure_board_setup_dummy_smc(cpu, info, MVBAR_ADDR); |
| } |
| |
| static void hb_write_secondary(ARMCPU *cpu, const struct arm_boot_info *info) |
| { |
| int n; |
| uint32_t smpboot[] = { |
| 0xee100fb0, /* mrc p15, 0, r0, c0, c0, 5 - read current core id */ |
| 0xe210000f, /* ands r0, r0, #0x0f */ |
| 0xe3a03040, /* mov r3, #0x40 - jump address is 0x40 + 0x10 * core id */ |
| 0xe0830200, /* add r0, r3, r0, lsl #4 */ |
| 0xe59f2024, /* ldr r2, privbase */ |
| 0xe3a01001, /* mov r1, #1 */ |
| 0xe5821100, /* str r1, [r2, #256] - set GICC_CTLR.Enable */ |
| 0xe3a010ff, /* mov r1, #0xff */ |
| 0xe5821104, /* str r1, [r2, #260] - set GICC_PMR.Priority to 0xff */ |
| 0xf57ff04f, /* dsb */ |
| 0xe320f003, /* wfi */ |
| 0xe5901000, /* ldr r1, [r0] */ |
| 0xe1110001, /* tst r1, r1 */ |
| 0x0afffffb, /* beq <wfi> */ |
| 0xe12fff11, /* bx r1 */ |
| MPCORE_PERIPHBASE /* privbase: MPCore peripheral base address. */ |
| }; |
| for (n = 0; n < ARRAY_SIZE(smpboot); n++) { |
| smpboot[n] = tswap32(smpboot[n]); |
| } |
| rom_add_blob_fixed_as("smpboot", smpboot, sizeof(smpboot), SMP_BOOT_ADDR, |
| arm_boot_address_space(cpu, info)); |
| } |
| |
| static void hb_reset_secondary(ARMCPU *cpu, const struct arm_boot_info *info) |
| { |
| CPUARMState *env = &cpu->env; |
| |
| switch (info->nb_cpus) { |
| case 4: |
| address_space_stl_notdirty(&address_space_memory, |
| SMP_BOOT_REG + 0x30, 0, |
| MEMTXATTRS_UNSPECIFIED, NULL); |
| case 3: |
| address_space_stl_notdirty(&address_space_memory, |
| SMP_BOOT_REG + 0x20, 0, |
| MEMTXATTRS_UNSPECIFIED, NULL); |
| case 2: |
| address_space_stl_notdirty(&address_space_memory, |
| SMP_BOOT_REG + 0x10, 0, |
| MEMTXATTRS_UNSPECIFIED, NULL); |
| env->regs[15] = SMP_BOOT_ADDR; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| #define NUM_REGS 0x200 |
| static void hb_regs_write(void *opaque, hwaddr offset, |
| uint64_t value, unsigned size) |
| { |
| uint32_t *regs = opaque; |
| |
| if (offset == 0xf00) { |
| if (value == 1 || value == 2) { |
| qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); |
| } else if (value == 3) { |
| qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); |
| } |
| } |
| |
| if (offset / 4 >= NUM_REGS) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "highbank: bad write offset 0x%" HWADDR_PRIx "\n", offset); |
| return; |
| } |
| regs[offset / 4] = value; |
| } |
| |
| static uint64_t hb_regs_read(void *opaque, hwaddr offset, |
| unsigned size) |
| { |
| uint32_t value; |
| uint32_t *regs = opaque; |
| |
| if (offset / 4 >= NUM_REGS) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "highbank: bad read offset 0x%" HWADDR_PRIx "\n", offset); |
| return 0; |
| } |
| value = regs[offset / 4]; |
| |
| if ((offset == 0x100) || (offset == 0x108) || (offset == 0x10C)) { |
| value |= 0x30000000; |
| } |
| |
| return value; |
| } |
| |
| static const MemoryRegionOps hb_mem_ops = { |
| .read = hb_regs_read, |
| .write = hb_regs_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| #define TYPE_HIGHBANK_REGISTERS "highbank-regs" |
| #define HIGHBANK_REGISTERS(obj) \ |
| OBJECT_CHECK(HighbankRegsState, (obj), TYPE_HIGHBANK_REGISTERS) |
| |
| typedef struct { |
| /*< private >*/ |
| SysBusDevice parent_obj; |
| /*< public >*/ |
| |
| MemoryRegion iomem; |
| uint32_t regs[NUM_REGS]; |
| } HighbankRegsState; |
| |
| static VMStateDescription vmstate_highbank_regs = { |
| .name = "highbank-regs", |
| .version_id = 0, |
| .minimum_version_id = 0, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32_ARRAY(regs, HighbankRegsState, NUM_REGS), |
| VMSTATE_END_OF_LIST(), |
| }, |
| }; |
| |
| static void highbank_regs_reset(DeviceState *dev) |
| { |
| HighbankRegsState *s = HIGHBANK_REGISTERS(dev); |
| |
| s->regs[0x40] = 0x05F20121; |
| s->regs[0x41] = 0x2; |
| s->regs[0x42] = 0x05F30121; |
| s->regs[0x43] = 0x05F40121; |
| } |
| |
| static void highbank_regs_init(Object *obj) |
| { |
| HighbankRegsState *s = HIGHBANK_REGISTERS(obj); |
| SysBusDevice *dev = SYS_BUS_DEVICE(obj); |
| |
| memory_region_init_io(&s->iomem, obj, &hb_mem_ops, s->regs, |
| "highbank_regs", 0x1000); |
| sysbus_init_mmio(dev, &s->iomem); |
| } |
| |
| static void highbank_regs_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->desc = "Calxeda Highbank registers"; |
| dc->vmsd = &vmstate_highbank_regs; |
| dc->reset = highbank_regs_reset; |
| } |
| |
| static const TypeInfo highbank_regs_info = { |
| .name = TYPE_HIGHBANK_REGISTERS, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(HighbankRegsState), |
| .instance_init = highbank_regs_init, |
| .class_init = highbank_regs_class_init, |
| }; |
| |
| static void highbank_regs_register_types(void) |
| { |
| type_register_static(&highbank_regs_info); |
| } |
| |
| type_init(highbank_regs_register_types) |
| |
| static struct arm_boot_info highbank_binfo; |
| |
| enum cxmachines { |
| CALXEDA_HIGHBANK, |
| CALXEDA_MIDWAY, |
| }; |
| |
| /* ram_size must be set to match the upper bound of memory in the |
| * device tree (linux/arch/arm/boot/dts/highbank.dts), which is |
| * normally 0xff900000 or -m 4089. When running this board on a |
| * 32-bit host, set the reg value of memory to 0xf7ff00000 in the |
| * device tree and pass -m 2047 to QEMU. |
| */ |
| static void calxeda_init(MachineState *machine, enum cxmachines machine_id) |
| { |
| ram_addr_t ram_size = machine->ram_size; |
| DeviceState *dev = NULL; |
| SysBusDevice *busdev; |
| qemu_irq pic[128]; |
| int n; |
| unsigned int smp_cpus = machine->smp.cpus; |
| qemu_irq cpu_irq[4]; |
| qemu_irq cpu_fiq[4]; |
| qemu_irq cpu_virq[4]; |
| qemu_irq cpu_vfiq[4]; |
| MemoryRegion *sysram; |
| MemoryRegion *dram; |
| MemoryRegion *sysmem; |
| char *sysboot_filename; |
| |
| switch (machine_id) { |
| case CALXEDA_HIGHBANK: |
| machine->cpu_type = ARM_CPU_TYPE_NAME("cortex-a9"); |
| break; |
| case CALXEDA_MIDWAY: |
| machine->cpu_type = ARM_CPU_TYPE_NAME("cortex-a15"); |
| break; |
| default: |
| assert(0); |
| } |
| |
| for (n = 0; n < smp_cpus; n++) { |
| Object *cpuobj; |
| ARMCPU *cpu; |
| |
| cpuobj = object_new(machine->cpu_type); |
| cpu = ARM_CPU(cpuobj); |
| |
| object_property_set_int(cpuobj, QEMU_PSCI_CONDUIT_SMC, |
| "psci-conduit", &error_abort); |
| |
| if (n) { |
| /* Secondary CPUs start in PSCI powered-down state */ |
| object_property_set_bool(cpuobj, true, |
| "start-powered-off", &error_abort); |
| } |
| |
| if (object_property_find(cpuobj, "reset-cbar", NULL)) { |
| object_property_set_int(cpuobj, MPCORE_PERIPHBASE, |
| "reset-cbar", &error_abort); |
| } |
| object_property_set_bool(cpuobj, true, "realized", &error_fatal); |
| cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ); |
| cpu_fiq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ); |
| cpu_virq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_VIRQ); |
| cpu_vfiq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_VFIQ); |
| } |
| |
| sysmem = get_system_memory(); |
| dram = g_new(MemoryRegion, 1); |
| memory_region_allocate_system_memory(dram, NULL, "highbank.dram", ram_size); |
| /* SDRAM at address zero. */ |
| memory_region_add_subregion(sysmem, 0, dram); |
| |
| sysram = g_new(MemoryRegion, 1); |
| memory_region_init_ram(sysram, NULL, "highbank.sysram", 0x8000, |
| &error_fatal); |
| memory_region_add_subregion(sysmem, 0xfff88000, sysram); |
| if (bios_name != NULL) { |
| sysboot_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name); |
| if (sysboot_filename != NULL) { |
| if (load_image_targphys(sysboot_filename, 0xfff88000, 0x8000) < 0) { |
| error_report("Unable to load %s", bios_name); |
| exit(1); |
| } |
| g_free(sysboot_filename); |
| } else { |
| error_report("Unable to find %s", bios_name); |
| exit(1); |
| } |
| } |
| |
| switch (machine_id) { |
| case CALXEDA_HIGHBANK: |
| dev = qdev_create(NULL, "l2x0"); |
| qdev_init_nofail(dev); |
| busdev = SYS_BUS_DEVICE(dev); |
| sysbus_mmio_map(busdev, 0, 0xfff12000); |
| |
| dev = qdev_create(NULL, TYPE_A9MPCORE_PRIV); |
| break; |
| case CALXEDA_MIDWAY: |
| dev = qdev_create(NULL, TYPE_A15MPCORE_PRIV); |
| break; |
| } |
| qdev_prop_set_uint32(dev, "num-cpu", smp_cpus); |
| qdev_prop_set_uint32(dev, "num-irq", NIRQ_GIC); |
| qdev_init_nofail(dev); |
| busdev = SYS_BUS_DEVICE(dev); |
| sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE); |
| for (n = 0; n < smp_cpus; n++) { |
| sysbus_connect_irq(busdev, n, cpu_irq[n]); |
| sysbus_connect_irq(busdev, n + smp_cpus, cpu_fiq[n]); |
| sysbus_connect_irq(busdev, n + 2 * smp_cpus, cpu_virq[n]); |
| sysbus_connect_irq(busdev, n + 3 * smp_cpus, cpu_vfiq[n]); |
| } |
| |
| for (n = 0; n < 128; n++) { |
| pic[n] = qdev_get_gpio_in(dev, n); |
| } |
| |
| dev = qdev_create(NULL, "sp804"); |
| qdev_prop_set_uint32(dev, "freq0", 150000000); |
| qdev_prop_set_uint32(dev, "freq1", 150000000); |
| qdev_init_nofail(dev); |
| busdev = SYS_BUS_DEVICE(dev); |
| sysbus_mmio_map(busdev, 0, 0xfff34000); |
| sysbus_connect_irq(busdev, 0, pic[18]); |
| pl011_create(0xfff36000, pic[20], serial_hd(0)); |
| |
| dev = qdev_create(NULL, TYPE_HIGHBANK_REGISTERS); |
| qdev_init_nofail(dev); |
| busdev = SYS_BUS_DEVICE(dev); |
| sysbus_mmio_map(busdev, 0, 0xfff3c000); |
| |
| sysbus_create_simple("pl061", 0xfff30000, pic[14]); |
| sysbus_create_simple("pl061", 0xfff31000, pic[15]); |
| sysbus_create_simple("pl061", 0xfff32000, pic[16]); |
| sysbus_create_simple("pl061", 0xfff33000, pic[17]); |
| sysbus_create_simple("pl031", 0xfff35000, pic[19]); |
| sysbus_create_simple("pl022", 0xfff39000, pic[23]); |
| |
| sysbus_create_simple(TYPE_SYSBUS_AHCI, 0xffe08000, pic[83]); |
| |
| if (nd_table[0].used) { |
| qemu_check_nic_model(&nd_table[0], "xgmac"); |
| dev = qdev_create(NULL, "xgmac"); |
| qdev_set_nic_properties(dev, &nd_table[0]); |
| qdev_init_nofail(dev); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xfff50000); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[77]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, pic[78]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, pic[79]); |
| |
| qemu_check_nic_model(&nd_table[1], "xgmac"); |
| dev = qdev_create(NULL, "xgmac"); |
| qdev_set_nic_properties(dev, &nd_table[1]); |
| qdev_init_nofail(dev); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xfff51000); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[80]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, pic[81]); |
| sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, pic[82]); |
| } |
| |
| /* TODO create and connect IDE devices for ide_drive_get() */ |
| |
| highbank_binfo.ram_size = ram_size; |
| /* highbank requires a dtb in order to boot, and the dtb will override |
| * the board ID. The following value is ignored, so set it to -1 to be |
| * clear that the value is meaningless. |
| */ |
| highbank_binfo.board_id = -1; |
| highbank_binfo.nb_cpus = smp_cpus; |
| highbank_binfo.loader_start = 0; |
| highbank_binfo.write_secondary_boot = hb_write_secondary; |
| highbank_binfo.secondary_cpu_reset_hook = hb_reset_secondary; |
| if (!kvm_enabled()) { |
| highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR; |
| highbank_binfo.write_board_setup = hb_write_board_setup; |
| highbank_binfo.secure_board_setup = true; |
| } else { |
| warn_report("cannot load built-in Monitor support " |
| "if KVM is enabled. Some guests (such as Linux) " |
| "may not boot."); |
| } |
| |
| arm_load_kernel(ARM_CPU(first_cpu), machine, &highbank_binfo); |
| } |
| |
| static void highbank_init(MachineState *machine) |
| { |
| calxeda_init(machine, CALXEDA_HIGHBANK); |
| } |
| |
| static void midway_init(MachineState *machine) |
| { |
| calxeda_init(machine, CALXEDA_MIDWAY); |
| } |
| |
| static void highbank_class_init(ObjectClass *oc, void *data) |
| { |
| MachineClass *mc = MACHINE_CLASS(oc); |
| |
| mc->desc = "Calxeda Highbank (ECX-1000)"; |
| mc->init = highbank_init; |
| mc->block_default_type = IF_IDE; |
| mc->units_per_default_bus = 1; |
| mc->max_cpus = 4; |
| mc->ignore_memory_transaction_failures = true; |
| } |
| |
| static const TypeInfo highbank_type = { |
| .name = MACHINE_TYPE_NAME("highbank"), |
| .parent = TYPE_MACHINE, |
| .class_init = highbank_class_init, |
| }; |
| |
| static void midway_class_init(ObjectClass *oc, void *data) |
| { |
| MachineClass *mc = MACHINE_CLASS(oc); |
| |
| mc->desc = "Calxeda Midway (ECX-2000)"; |
| mc->init = midway_init; |
| mc->block_default_type = IF_IDE; |
| mc->units_per_default_bus = 1; |
| mc->max_cpus = 4; |
| mc->ignore_memory_transaction_failures = true; |
| } |
| |
| static const TypeInfo midway_type = { |
| .name = MACHINE_TYPE_NAME("midway"), |
| .parent = TYPE_MACHINE, |
| .class_init = midway_class_init, |
| }; |
| |
| static void calxeda_machines_init(void) |
| { |
| type_register_static(&highbank_type); |
| type_register_static(&midway_type); |
| } |
| |
| type_init(calxeda_machines_init) |