| /* |
| * tpm_tis_common.c - QEMU's TPM TIS interface emulator |
| * device agnostic functions |
| * |
| * Copyright (C) 2006,2010-2013 IBM Corporation |
| * |
| * Authors: |
| * Stefan Berger <stefanb@us.ibm.com> |
| * David Safford <safford@us.ibm.com> |
| * |
| * Xen 4 support: Andrease Niederl <andreas.niederl@iaik.tugraz.at> |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2 or later. |
| * See the COPYING file in the top-level directory. |
| * |
| * Implementation of the TIS interface according to specs found at |
| * http://www.trustedcomputinggroup.org. This implementation currently |
| * supports version 1.3, 21 March 2013 |
| * In the developers menu choose the PC Client section then find the TIS |
| * specification. |
| * |
| * TPM TIS for TPM 2 implementation following TCG PC Client Platform |
| * TPM Profile (PTP) Specification, Family 2.0, Revision 00.43 |
| */ |
| #include "qemu/osdep.h" |
| #include "hw/irq.h" |
| #include "hw/isa/isa.h" |
| #include "qapi/error.h" |
| #include "qemu/bswap.h" |
| #include "qemu/crc-ccitt.h" |
| #include "qemu/module.h" |
| |
| #include "hw/acpi/tpm.h" |
| #include "hw/pci/pci_ids.h" |
| #include "hw/qdev-properties.h" |
| #include "migration/vmstate.h" |
| #include "sysemu/tpm_backend.h" |
| #include "sysemu/tpm_util.h" |
| #include "tpm_ppi.h" |
| #include "trace.h" |
| |
| #include "tpm_tis.h" |
| |
| #define DEBUG_TIS 0 |
| |
| /* local prototypes */ |
| |
| static uint64_t tpm_tis_mmio_read(void *opaque, hwaddr addr, |
| unsigned size); |
| |
| /* utility functions */ |
| |
| static uint8_t tpm_tis_locality_from_addr(hwaddr addr) |
| { |
| uint8_t locty; |
| |
| locty = (uint8_t)((addr >> TPM_TIS_LOCALITY_SHIFT) & 0x7); |
| assert(TPM_TIS_IS_VALID_LOCTY(locty)); |
| |
| return locty; |
| } |
| |
| |
| /* |
| * Set the given flags in the STS register by clearing the register but |
| * preserving the SELFTEST_DONE and TPM_FAMILY_MASK flags and then setting |
| * the new flags. |
| * |
| * The SELFTEST_DONE flag is acquired from the backend that determines it by |
| * peeking into TPM commands. |
| * |
| * A VM suspend/resume will preserve the flag by storing it into the VM |
| * device state, but the backend will not remember it when QEMU is started |
| * again. Therefore, we cache the flag here. Once set, it will not be unset |
| * except by a reset. |
| */ |
| static void tpm_tis_sts_set(TPMLocality *l, uint32_t flags) |
| { |
| l->sts &= TPM_TIS_STS_SELFTEST_DONE | TPM_TIS_STS_TPM_FAMILY_MASK; |
| l->sts |= flags; |
| } |
| |
| /* |
| * Send a request to the TPM. |
| */ |
| static void tpm_tis_tpm_send(TPMState *s, uint8_t locty) |
| { |
| tpm_util_show_buffer(s->buffer, s->be_buffer_size, "To TPM"); |
| |
| /* |
| * rw_offset serves as length indicator for length of data; |
| * it's reset when the response comes back |
| */ |
| s->loc[locty].state = TPM_TIS_STATE_EXECUTION; |
| |
| s->cmd = (TPMBackendCmd) { |
| .locty = locty, |
| .in = s->buffer, |
| .in_len = s->rw_offset, |
| .out = s->buffer, |
| .out_len = s->be_buffer_size, |
| }; |
| |
| tpm_backend_deliver_request(s->be_driver, &s->cmd); |
| } |
| |
| /* raise an interrupt if allowed */ |
| static void tpm_tis_raise_irq(TPMState *s, uint8_t locty, uint32_t irqmask) |
| { |
| if (!TPM_TIS_IS_VALID_LOCTY(locty)) { |
| return; |
| } |
| |
| if ((s->loc[locty].inte & TPM_TIS_INT_ENABLED) && |
| (s->loc[locty].inte & irqmask)) { |
| trace_tpm_tis_raise_irq(irqmask); |
| qemu_irq_raise(s->irq); |
| s->loc[locty].ints |= irqmask; |
| } |
| } |
| |
| static uint32_t tpm_tis_check_request_use_except(TPMState *s, uint8_t locty) |
| { |
| uint8_t l; |
| |
| for (l = 0; l < TPM_TIS_NUM_LOCALITIES; l++) { |
| if (l == locty) { |
| continue; |
| } |
| if ((s->loc[l].access & TPM_TIS_ACCESS_REQUEST_USE)) { |
| return 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void tpm_tis_new_active_locality(TPMState *s, uint8_t new_active_locty) |
| { |
| bool change = (s->active_locty != new_active_locty); |
| bool is_seize; |
| uint8_t mask; |
| |
| if (change && TPM_TIS_IS_VALID_LOCTY(s->active_locty)) { |
| is_seize = TPM_TIS_IS_VALID_LOCTY(new_active_locty) && |
| s->loc[new_active_locty].access & TPM_TIS_ACCESS_SEIZE; |
| |
| if (is_seize) { |
| mask = ~(TPM_TIS_ACCESS_ACTIVE_LOCALITY); |
| } else { |
| mask = ~(TPM_TIS_ACCESS_ACTIVE_LOCALITY| |
| TPM_TIS_ACCESS_REQUEST_USE); |
| } |
| /* reset flags on the old active locality */ |
| s->loc[s->active_locty].access &= mask; |
| |
| if (is_seize) { |
| s->loc[s->active_locty].access |= TPM_TIS_ACCESS_BEEN_SEIZED; |
| } |
| } |
| |
| s->active_locty = new_active_locty; |
| |
| trace_tpm_tis_new_active_locality(s->active_locty); |
| |
| if (TPM_TIS_IS_VALID_LOCTY(new_active_locty)) { |
| /* set flags on the new active locality */ |
| s->loc[new_active_locty].access |= TPM_TIS_ACCESS_ACTIVE_LOCALITY; |
| s->loc[new_active_locty].access &= ~(TPM_TIS_ACCESS_REQUEST_USE | |
| TPM_TIS_ACCESS_SEIZE); |
| } |
| |
| if (change) { |
| tpm_tis_raise_irq(s, s->active_locty, TPM_TIS_INT_LOCALITY_CHANGED); |
| } |
| } |
| |
| /* abort -- this function switches the locality */ |
| static void tpm_tis_abort(TPMState *s) |
| { |
| s->rw_offset = 0; |
| |
| trace_tpm_tis_abort(s->next_locty); |
| |
| /* |
| * Need to react differently depending on who's aborting now and |
| * which locality will become active afterwards. |
| */ |
| if (s->aborting_locty == s->next_locty) { |
| s->loc[s->aborting_locty].state = TPM_TIS_STATE_READY; |
| tpm_tis_sts_set(&s->loc[s->aborting_locty], |
| TPM_TIS_STS_COMMAND_READY); |
| tpm_tis_raise_irq(s, s->aborting_locty, TPM_TIS_INT_COMMAND_READY); |
| } |
| |
| /* locality after abort is another one than the current one */ |
| tpm_tis_new_active_locality(s, s->next_locty); |
| |
| s->next_locty = TPM_TIS_NO_LOCALITY; |
| /* nobody's aborting a command anymore */ |
| s->aborting_locty = TPM_TIS_NO_LOCALITY; |
| } |
| |
| /* prepare aborting current command */ |
| static void tpm_tis_prep_abort(TPMState *s, uint8_t locty, uint8_t newlocty) |
| { |
| uint8_t busy_locty; |
| |
| assert(TPM_TIS_IS_VALID_LOCTY(newlocty)); |
| |
| s->aborting_locty = locty; /* may also be TPM_TIS_NO_LOCALITY */ |
| s->next_locty = newlocty; /* locality after successful abort */ |
| |
| /* |
| * only abort a command using an interrupt if currently executing |
| * a command AND if there's a valid connection to the vTPM. |
| */ |
| for (busy_locty = 0; busy_locty < TPM_TIS_NUM_LOCALITIES; busy_locty++) { |
| if (s->loc[busy_locty].state == TPM_TIS_STATE_EXECUTION) { |
| /* |
| * request the backend to cancel. Some backends may not |
| * support it |
| */ |
| tpm_backend_cancel_cmd(s->be_driver); |
| return; |
| } |
| } |
| |
| tpm_tis_abort(s); |
| } |
| |
| /* |
| * Callback from the TPM to indicate that the response was received. |
| */ |
| void tpm_tis_request_completed(TPMState *s, int ret) |
| { |
| uint8_t locty = s->cmd.locty; |
| uint8_t l; |
| |
| assert(TPM_TIS_IS_VALID_LOCTY(locty)); |
| |
| if (s->cmd.selftest_done) { |
| for (l = 0; l < TPM_TIS_NUM_LOCALITIES; l++) { |
| s->loc[l].sts |= TPM_TIS_STS_SELFTEST_DONE; |
| } |
| } |
| |
| /* FIXME: report error if ret != 0 */ |
| tpm_tis_sts_set(&s->loc[locty], |
| TPM_TIS_STS_VALID | TPM_TIS_STS_DATA_AVAILABLE); |
| s->loc[locty].state = TPM_TIS_STATE_COMPLETION; |
| s->rw_offset = 0; |
| |
| tpm_util_show_buffer(s->buffer, s->be_buffer_size, "From TPM"); |
| |
| if (TPM_TIS_IS_VALID_LOCTY(s->next_locty)) { |
| tpm_tis_abort(s); |
| } |
| |
| tpm_tis_raise_irq(s, locty, |
| TPM_TIS_INT_DATA_AVAILABLE | TPM_TIS_INT_STS_VALID); |
| } |
| |
| /* |
| * Read a byte of response data |
| */ |
| static uint32_t tpm_tis_data_read(TPMState *s, uint8_t locty) |
| { |
| uint32_t ret = TPM_TIS_NO_DATA_BYTE; |
| uint16_t len; |
| |
| if ((s->loc[locty].sts & TPM_TIS_STS_DATA_AVAILABLE)) { |
| len = MIN(tpm_cmd_get_size(&s->buffer), |
| s->be_buffer_size); |
| |
| ret = s->buffer[s->rw_offset++]; |
| if (s->rw_offset >= len) { |
| /* got last byte */ |
| tpm_tis_sts_set(&s->loc[locty], TPM_TIS_STS_VALID); |
| tpm_tis_raise_irq(s, locty, TPM_TIS_INT_STS_VALID); |
| } |
| trace_tpm_tis_data_read(ret, s->rw_offset - 1); |
| } |
| |
| return ret; |
| } |
| |
| #ifdef DEBUG_TIS |
| static void tpm_tis_dump_state(TPMState *s, hwaddr addr) |
| { |
| static const unsigned regs[] = { |
| TPM_TIS_REG_ACCESS, |
| TPM_TIS_REG_INT_ENABLE, |
| TPM_TIS_REG_INT_VECTOR, |
| TPM_TIS_REG_INT_STATUS, |
| TPM_TIS_REG_INTF_CAPABILITY, |
| TPM_TIS_REG_STS, |
| TPM_TIS_REG_DID_VID, |
| TPM_TIS_REG_RID, |
| 0xfff}; |
| int idx; |
| uint8_t locty = tpm_tis_locality_from_addr(addr); |
| hwaddr base = addr & ~0xfff; |
| |
| printf("tpm_tis: active locality : %d\n" |
| "tpm_tis: state of locality %d : %d\n" |
| "tpm_tis: register dump:\n", |
| s->active_locty, |
| locty, s->loc[locty].state); |
| |
| for (idx = 0; regs[idx] != 0xfff; idx++) { |
| printf("tpm_tis: 0x%04x : 0x%08x\n", regs[idx], |
| (int)tpm_tis_mmio_read(s, base + regs[idx], 4)); |
| } |
| |
| printf("tpm_tis: r/w offset : %d\n" |
| "tpm_tis: result buffer : ", |
| s->rw_offset); |
| for (idx = 0; |
| idx < MIN(tpm_cmd_get_size(&s->buffer), s->be_buffer_size); |
| idx++) { |
| printf("%c%02x%s", |
| s->rw_offset == idx ? '>' : ' ', |
| s->buffer[idx], |
| ((idx & 0xf) == 0xf) ? "\ntpm_tis: " : ""); |
| } |
| printf("\n"); |
| } |
| #endif |
| |
| /* |
| * Read a register of the TIS interface |
| * See specs pages 33-63 for description of the registers |
| */ |
| static uint64_t tpm_tis_mmio_read(void *opaque, hwaddr addr, |
| unsigned size) |
| { |
| TPMState *s = opaque; |
| uint16_t offset = addr & 0xffc; |
| uint8_t shift = (addr & 0x3) * 8; |
| uint32_t val = 0xffffffff; |
| uint8_t locty = tpm_tis_locality_from_addr(addr); |
| uint32_t avail; |
| uint8_t v; |
| |
| if (tpm_backend_had_startup_error(s->be_driver)) { |
| return 0; |
| } |
| |
| switch (offset) { |
| case TPM_TIS_REG_ACCESS: |
| /* never show the SEIZE flag even though we use it internally */ |
| val = s->loc[locty].access & ~TPM_TIS_ACCESS_SEIZE; |
| /* the pending flag is always calculated */ |
| if (tpm_tis_check_request_use_except(s, locty)) { |
| val |= TPM_TIS_ACCESS_PENDING_REQUEST; |
| } |
| val |= !tpm_backend_get_tpm_established_flag(s->be_driver); |
| break; |
| case TPM_TIS_REG_INT_ENABLE: |
| val = s->loc[locty].inte; |
| break; |
| case TPM_TIS_REG_INT_VECTOR: |
| val = s->irq_num; |
| break; |
| case TPM_TIS_REG_INT_STATUS: |
| val = s->loc[locty].ints; |
| break; |
| case TPM_TIS_REG_INTF_CAPABILITY: |
| switch (s->be_tpm_version) { |
| case TPM_VERSION_UNSPEC: |
| val = 0; |
| break; |
| case TPM_VERSION_1_2: |
| val = TPM_TIS_CAPABILITIES_SUPPORTED1_3; |
| break; |
| case TPM_VERSION_2_0: |
| val = TPM_TIS_CAPABILITIES_SUPPORTED2_0; |
| break; |
| } |
| break; |
| case TPM_TIS_REG_STS: |
| if (s->active_locty == locty) { |
| if ((s->loc[locty].sts & TPM_TIS_STS_DATA_AVAILABLE)) { |
| val = TPM_TIS_BURST_COUNT( |
| MIN(tpm_cmd_get_size(&s->buffer), |
| s->be_buffer_size) |
| - s->rw_offset) | s->loc[locty].sts; |
| } else { |
| avail = s->be_buffer_size - s->rw_offset; |
| /* |
| * byte-sized reads should not return 0x00 for 0x100 |
| * available bytes. |
| */ |
| if (size == 1 && avail > 0xff) { |
| avail = 0xff; |
| } |
| val = TPM_TIS_BURST_COUNT(avail) | s->loc[locty].sts; |
| } |
| } |
| break; |
| case TPM_TIS_REG_DATA_FIFO: |
| case TPM_TIS_REG_DATA_XFIFO ... TPM_TIS_REG_DATA_XFIFO_END: |
| if (s->active_locty == locty) { |
| if (size > 4 - (addr & 0x3)) { |
| /* prevent access beyond FIFO */ |
| size = 4 - (addr & 0x3); |
| } |
| val = 0; |
| shift = 0; |
| while (size > 0) { |
| switch (s->loc[locty].state) { |
| case TPM_TIS_STATE_COMPLETION: |
| v = tpm_tis_data_read(s, locty); |
| break; |
| default: |
| v = TPM_TIS_NO_DATA_BYTE; |
| break; |
| } |
| val |= (v << shift); |
| shift += 8; |
| size--; |
| } |
| shift = 0; /* no more adjustments */ |
| } |
| break; |
| case TPM_TIS_REG_INTERFACE_ID: |
| val = s->loc[locty].iface_id; |
| break; |
| case TPM_TIS_REG_DID_VID: |
| val = (TPM_TIS_TPM_DID << 16) | TPM_TIS_TPM_VID; |
| break; |
| case TPM_TIS_REG_RID: |
| val = TPM_TIS_TPM_RID; |
| break; |
| #ifdef DEBUG_TIS |
| case TPM_TIS_REG_DEBUG: |
| tpm_tis_dump_state(s, addr); |
| break; |
| #endif |
| } |
| |
| if (shift) { |
| val >>= shift; |
| } |
| |
| trace_tpm_tis_mmio_read(size, addr, val); |
| |
| return val; |
| } |
| |
| /* |
| * A wrapper read function so that it can be directly called without |
| * mmio. |
| */ |
| uint32_t tpm_tis_read_data(TPMState *s, hwaddr addr, unsigned size) |
| { |
| return tpm_tis_mmio_read(s, addr, size); |
| } |
| |
| /* |
| * Calculate current data buffer checksum |
| */ |
| uint16_t tpm_tis_get_checksum(TPMState *s) |
| { |
| return bswap16(crc_ccitt(0, s->buffer, s->rw_offset)); |
| } |
| |
| /* |
| * Write a value to a register of the TIS interface |
| * See specs pages 33-63 for description of the registers |
| */ |
| static void tpm_tis_mmio_write(void *opaque, hwaddr addr, |
| uint64_t val, unsigned size) |
| { |
| TPMState *s = opaque; |
| uint16_t off = addr & 0xffc; |
| uint8_t shift = (addr & 0x3) * 8; |
| uint8_t locty = tpm_tis_locality_from_addr(addr); |
| uint8_t active_locty, l; |
| int c, set_new_locty = 1; |
| uint16_t len; |
| uint32_t mask = (size == 1) ? 0xff : ((size == 2) ? 0xffff : ~0); |
| |
| trace_tpm_tis_mmio_write(size, addr, val); |
| |
| if (locty == 4) { |
| trace_tpm_tis_mmio_write_locty4(); |
| return; |
| } |
| |
| if (tpm_backend_had_startup_error(s->be_driver)) { |
| return; |
| } |
| |
| val &= mask; |
| |
| if (shift) { |
| val <<= shift; |
| mask <<= shift; |
| } |
| |
| mask ^= 0xffffffff; |
| |
| switch (off) { |
| case TPM_TIS_REG_ACCESS: |
| |
| if ((val & TPM_TIS_ACCESS_SEIZE)) { |
| val &= ~(TPM_TIS_ACCESS_REQUEST_USE | |
| TPM_TIS_ACCESS_ACTIVE_LOCALITY); |
| } |
| |
| active_locty = s->active_locty; |
| |
| if ((val & TPM_TIS_ACCESS_ACTIVE_LOCALITY)) { |
| /* give up locality if currently owned */ |
| if (s->active_locty == locty) { |
| trace_tpm_tis_mmio_write_release_locty(locty); |
| |
| uint8_t newlocty = TPM_TIS_NO_LOCALITY; |
| /* anybody wants the locality ? */ |
| for (c = TPM_TIS_NUM_LOCALITIES - 1; c >= 0; c--) { |
| if ((s->loc[c].access & TPM_TIS_ACCESS_REQUEST_USE)) { |
| trace_tpm_tis_mmio_write_locty_req_use(c); |
| newlocty = c; |
| break; |
| } |
| } |
| trace_tpm_tis_mmio_write_next_locty(newlocty); |
| |
| if (TPM_TIS_IS_VALID_LOCTY(newlocty)) { |
| set_new_locty = 0; |
| tpm_tis_prep_abort(s, locty, newlocty); |
| } else { |
| active_locty = TPM_TIS_NO_LOCALITY; |
| } |
| } else { |
| /* not currently the owner; clear a pending request */ |
| s->loc[locty].access &= ~TPM_TIS_ACCESS_REQUEST_USE; |
| } |
| } |
| |
| if ((val & TPM_TIS_ACCESS_BEEN_SEIZED)) { |
| s->loc[locty].access &= ~TPM_TIS_ACCESS_BEEN_SEIZED; |
| } |
| |
| if ((val & TPM_TIS_ACCESS_SEIZE)) { |
| /* |
| * allow seize if a locality is active and the requesting |
| * locality is higher than the one that's active |
| * OR |
| * allow seize for requesting locality if no locality is |
| * active |
| */ |
| while ((TPM_TIS_IS_VALID_LOCTY(s->active_locty) && |
| locty > s->active_locty) || |
| !TPM_TIS_IS_VALID_LOCTY(s->active_locty)) { |
| bool higher_seize = false; |
| |
| /* already a pending SEIZE ? */ |
| if ((s->loc[locty].access & TPM_TIS_ACCESS_SEIZE)) { |
| break; |
| } |
| |
| /* check for ongoing seize by a higher locality */ |
| for (l = locty + 1; l < TPM_TIS_NUM_LOCALITIES; l++) { |
| if ((s->loc[l].access & TPM_TIS_ACCESS_SEIZE)) { |
| higher_seize = true; |
| break; |
| } |
| } |
| |
| if (higher_seize) { |
| break; |
| } |
| |
| /* cancel any seize by a lower locality */ |
| for (l = 0; l < locty; l++) { |
| s->loc[l].access &= ~TPM_TIS_ACCESS_SEIZE; |
| } |
| |
| s->loc[locty].access |= TPM_TIS_ACCESS_SEIZE; |
| |
| trace_tpm_tis_mmio_write_locty_seized(locty, s->active_locty); |
| trace_tpm_tis_mmio_write_init_abort(); |
| |
| set_new_locty = 0; |
| tpm_tis_prep_abort(s, s->active_locty, locty); |
| break; |
| } |
| } |
| |
| if ((val & TPM_TIS_ACCESS_REQUEST_USE)) { |
| if (s->active_locty != locty) { |
| if (TPM_TIS_IS_VALID_LOCTY(s->active_locty)) { |
| s->loc[locty].access |= TPM_TIS_ACCESS_REQUEST_USE; |
| } else { |
| /* no locality active -> make this one active now */ |
| active_locty = locty; |
| } |
| } |
| } |
| |
| if (set_new_locty) { |
| tpm_tis_new_active_locality(s, active_locty); |
| } |
| |
| break; |
| case TPM_TIS_REG_INT_ENABLE: |
| s->loc[locty].inte &= mask; |
| s->loc[locty].inte |= (val & (TPM_TIS_INT_ENABLED | |
| TPM_TIS_INT_POLARITY_MASK | |
| TPM_TIS_INTERRUPTS_SUPPORTED)); |
| break; |
| case TPM_TIS_REG_INT_VECTOR: |
| /* hard wired -- ignore */ |
| break; |
| case TPM_TIS_REG_INT_STATUS: |
| /* clearing of interrupt flags */ |
| if (((val & TPM_TIS_INTERRUPTS_SUPPORTED)) && |
| (s->loc[locty].ints & TPM_TIS_INTERRUPTS_SUPPORTED)) { |
| s->loc[locty].ints &= ~val; |
| if (s->loc[locty].ints == 0) { |
| qemu_irq_lower(s->irq); |
| trace_tpm_tis_mmio_write_lowering_irq(); |
| } |
| } |
| s->loc[locty].ints &= ~(val & TPM_TIS_INTERRUPTS_SUPPORTED); |
| break; |
| case TPM_TIS_REG_STS: |
| if (s->active_locty != locty) { |
| break; |
| } |
| |
| if (s->be_tpm_version == TPM_VERSION_2_0) { |
| /* some flags that are only supported for TPM 2 */ |
| if (val & TPM_TIS_STS_COMMAND_CANCEL) { |
| if (s->loc[locty].state == TPM_TIS_STATE_EXECUTION) { |
| /* |
| * request the backend to cancel. Some backends may not |
| * support it |
| */ |
| tpm_backend_cancel_cmd(s->be_driver); |
| } |
| } |
| |
| if (val & TPM_TIS_STS_RESET_ESTABLISHMENT_BIT) { |
| if (locty == 3 || locty == 4) { |
| tpm_backend_reset_tpm_established_flag(s->be_driver, locty); |
| } |
| } |
| } |
| |
| val &= (TPM_TIS_STS_COMMAND_READY | TPM_TIS_STS_TPM_GO | |
| TPM_TIS_STS_RESPONSE_RETRY); |
| |
| if (val == TPM_TIS_STS_COMMAND_READY) { |
| switch (s->loc[locty].state) { |
| |
| case TPM_TIS_STATE_READY: |
| s->rw_offset = 0; |
| break; |
| |
| case TPM_TIS_STATE_IDLE: |
| tpm_tis_sts_set(&s->loc[locty], TPM_TIS_STS_COMMAND_READY); |
| s->loc[locty].state = TPM_TIS_STATE_READY; |
| tpm_tis_raise_irq(s, locty, TPM_TIS_INT_COMMAND_READY); |
| break; |
| |
| case TPM_TIS_STATE_EXECUTION: |
| case TPM_TIS_STATE_RECEPTION: |
| /* abort currently running command */ |
| trace_tpm_tis_mmio_write_init_abort(); |
| tpm_tis_prep_abort(s, locty, locty); |
| break; |
| |
| case TPM_TIS_STATE_COMPLETION: |
| s->rw_offset = 0; |
| /* shortcut to ready state with C/R set */ |
| s->loc[locty].state = TPM_TIS_STATE_READY; |
| if (!(s->loc[locty].sts & TPM_TIS_STS_COMMAND_READY)) { |
| tpm_tis_sts_set(&s->loc[locty], |
| TPM_TIS_STS_COMMAND_READY); |
| tpm_tis_raise_irq(s, locty, TPM_TIS_INT_COMMAND_READY); |
| } |
| s->loc[locty].sts &= ~(TPM_TIS_STS_DATA_AVAILABLE); |
| break; |
| |
| } |
| } else if (val == TPM_TIS_STS_TPM_GO) { |
| switch (s->loc[locty].state) { |
| case TPM_TIS_STATE_RECEPTION: |
| if ((s->loc[locty].sts & TPM_TIS_STS_EXPECT) == 0) { |
| tpm_tis_tpm_send(s, locty); |
| } |
| break; |
| default: |
| /* ignore */ |
| break; |
| } |
| } else if (val == TPM_TIS_STS_RESPONSE_RETRY) { |
| switch (s->loc[locty].state) { |
| case TPM_TIS_STATE_COMPLETION: |
| s->rw_offset = 0; |
| tpm_tis_sts_set(&s->loc[locty], |
| TPM_TIS_STS_VALID| |
| TPM_TIS_STS_DATA_AVAILABLE); |
| break; |
| default: |
| /* ignore */ |
| break; |
| } |
| } |
| break; |
| case TPM_TIS_REG_DATA_FIFO: |
| case TPM_TIS_REG_DATA_XFIFO ... TPM_TIS_REG_DATA_XFIFO_END: |
| /* data fifo */ |
| if (s->active_locty != locty) { |
| break; |
| } |
| |
| if (s->loc[locty].state == TPM_TIS_STATE_IDLE || |
| s->loc[locty].state == TPM_TIS_STATE_EXECUTION || |
| s->loc[locty].state == TPM_TIS_STATE_COMPLETION) { |
| /* drop the byte */ |
| } else { |
| trace_tpm_tis_mmio_write_data2send(val, size); |
| if (s->loc[locty].state == TPM_TIS_STATE_READY) { |
| s->loc[locty].state = TPM_TIS_STATE_RECEPTION; |
| tpm_tis_sts_set(&s->loc[locty], |
| TPM_TIS_STS_EXPECT | TPM_TIS_STS_VALID); |
| } |
| |
| val >>= shift; |
| if (size > 4 - (addr & 0x3)) { |
| /* prevent access beyond FIFO */ |
| size = 4 - (addr & 0x3); |
| } |
| |
| while ((s->loc[locty].sts & TPM_TIS_STS_EXPECT) && size > 0) { |
| if (s->rw_offset < s->be_buffer_size) { |
| s->buffer[s->rw_offset++] = |
| (uint8_t)val; |
| val >>= 8; |
| size--; |
| } else { |
| tpm_tis_sts_set(&s->loc[locty], TPM_TIS_STS_VALID); |
| } |
| } |
| |
| /* check for complete packet */ |
| if (s->rw_offset > 5 && |
| (s->loc[locty].sts & TPM_TIS_STS_EXPECT)) { |
| /* we have a packet length - see if we have all of it */ |
| bool need_irq = !(s->loc[locty].sts & TPM_TIS_STS_VALID); |
| |
| len = tpm_cmd_get_size(&s->buffer); |
| if (len > s->rw_offset) { |
| tpm_tis_sts_set(&s->loc[locty], |
| TPM_TIS_STS_EXPECT | TPM_TIS_STS_VALID); |
| } else { |
| /* packet complete */ |
| tpm_tis_sts_set(&s->loc[locty], TPM_TIS_STS_VALID); |
| } |
| if (need_irq) { |
| tpm_tis_raise_irq(s, locty, TPM_TIS_INT_STS_VALID); |
| } |
| } |
| } |
| break; |
| case TPM_TIS_REG_INTERFACE_ID: |
| if (val & TPM_TIS_IFACE_ID_INT_SEL_LOCK) { |
| for (l = 0; l < TPM_TIS_NUM_LOCALITIES; l++) { |
| s->loc[l].iface_id |= TPM_TIS_IFACE_ID_INT_SEL_LOCK; |
| } |
| } |
| break; |
| } |
| } |
| |
| /* |
| * A wrapper write function so that it can be directly called without |
| * mmio. |
| */ |
| void tpm_tis_write_data(TPMState *s, hwaddr addr, uint64_t val, uint32_t size) |
| { |
| tpm_tis_mmio_write(s, addr, val, size); |
| } |
| |
| const MemoryRegionOps tpm_tis_memory_ops = { |
| .read = tpm_tis_mmio_read, |
| .write = tpm_tis_mmio_write, |
| .endianness = DEVICE_LITTLE_ENDIAN, |
| .valid = { |
| .min_access_size = 1, |
| .max_access_size = 4, |
| }, |
| }; |
| |
| /* |
| * Get the TPMVersion of the backend device being used |
| */ |
| enum TPMVersion tpm_tis_get_tpm_version(TPMState *s) |
| { |
| if (tpm_backend_had_startup_error(s->be_driver)) { |
| return TPM_VERSION_UNSPEC; |
| } |
| |
| return tpm_backend_get_tpm_version(s->be_driver); |
| } |
| |
| /* |
| * This function is called when the machine starts, resets or due to |
| * S3 resume. |
| */ |
| void tpm_tis_reset(TPMState *s) |
| { |
| int c; |
| |
| s->be_tpm_version = tpm_backend_get_tpm_version(s->be_driver); |
| s->be_buffer_size = MIN(tpm_backend_get_buffer_size(s->be_driver), |
| TPM_TIS_BUFFER_MAX); |
| |
| if (s->ppi_enabled) { |
| tpm_ppi_reset(&s->ppi); |
| } |
| tpm_backend_reset(s->be_driver); |
| |
| s->active_locty = TPM_TIS_NO_LOCALITY; |
| s->next_locty = TPM_TIS_NO_LOCALITY; |
| s->aborting_locty = TPM_TIS_NO_LOCALITY; |
| |
| for (c = 0; c < TPM_TIS_NUM_LOCALITIES; c++) { |
| s->loc[c].access = TPM_TIS_ACCESS_TPM_REG_VALID_STS; |
| switch (s->be_tpm_version) { |
| case TPM_VERSION_UNSPEC: |
| break; |
| case TPM_VERSION_1_2: |
| s->loc[c].sts = TPM_TIS_STS_TPM_FAMILY1_2; |
| s->loc[c].iface_id = TPM_TIS_IFACE_ID_SUPPORTED_FLAGS1_3; |
| break; |
| case TPM_VERSION_2_0: |
| s->loc[c].sts = TPM_TIS_STS_TPM_FAMILY2_0; |
| s->loc[c].iface_id = TPM_TIS_IFACE_ID_SUPPORTED_FLAGS2_0; |
| break; |
| } |
| s->loc[c].inte = TPM_TIS_INT_POLARITY_LOW_LEVEL; |
| s->loc[c].ints = 0; |
| s->loc[c].state = TPM_TIS_STATE_IDLE; |
| |
| s->rw_offset = 0; |
| } |
| |
| if (tpm_backend_startup_tpm(s->be_driver, s->be_buffer_size) < 0) { |
| exit(1); |
| } |
| } |
| |
| /* persistent state handling */ |
| |
| int tpm_tis_pre_save(TPMState *s) |
| { |
| uint8_t locty = s->active_locty; |
| |
| trace_tpm_tis_pre_save(locty, s->rw_offset); |
| |
| if (DEBUG_TIS) { |
| tpm_tis_dump_state(s, 0); |
| } |
| |
| /* |
| * Synchronize with backend completion. |
| */ |
| tpm_backend_finish_sync(s->be_driver); |
| |
| return 0; |
| } |
| |
| const VMStateDescription vmstate_locty = { |
| .name = "tpm-tis/locty", |
| .version_id = 0, |
| .fields = (const VMStateField[]) { |
| VMSTATE_UINT32(state, TPMLocality), |
| VMSTATE_UINT32(inte, TPMLocality), |
| VMSTATE_UINT32(ints, TPMLocality), |
| VMSTATE_UINT8(access, TPMLocality), |
| VMSTATE_UINT32(sts, TPMLocality), |
| VMSTATE_UINT32(iface_id, TPMLocality), |
| VMSTATE_END_OF_LIST(), |
| } |
| }; |
| |