| # Check for crash when using memory beyond the available guest processor |
| # address space. |
| # |
| # Copyright (c) 2023 Red Hat, Inc. |
| # |
| # Author: |
| # Ani Sinha <anisinha@redhat.com> |
| # |
| # SPDX-License-Identifier: GPL-2.0-or-later |
| |
| from avocado_qemu import QemuSystemTest |
| import signal |
| import time |
| |
| class MemAddrCheck(QemuSystemTest): |
| # after launch, in order to generate the logs from QEMU we need to |
| # wait for some time. Launching and then immediately shutting down |
| # the VM generates empty logs. A delay of 1 second is added for |
| # this reason. |
| DELAY_Q35_BOOT_SEQUENCE = 1 |
| |
| # first, lets test some 32-bit processors. |
| # for all 32-bit cases, pci64_hole_size is 0. |
| def test_phybits_low_pse36(self): |
| """ |
| :avocado: tags=machine:q35 |
| :avocado: tags=arch:x86_64 |
| |
| With pse36 feature ON, a processor has 36 bits of addressing. So it can |
| access up to a maximum of 64GiB of memory. Memory hotplug region begins |
| at 4 GiB boundary when "above_4g_mem_size" is 0 (this would be true when |
| we have 0.5 GiB of VM memory, see pc_q35_init()). This means total |
| hotpluggable memory size is 60 GiB. Per slot, we reserve 1 GiB of memory |
| for dimm alignment for all machines. That leaves total hotpluggable |
| actual memory size of 59 GiB. If the VM is started with 0.5 GiB of |
| memory, maxmem should be set to a maximum value of 59.5 GiB to ensure |
| that the processor can address all memory directly. |
| Note that 64-bit pci hole size is 0 in this case. If maxmem is set to |
| 59.6G, QEMU should fail to start with a message "phy-bits are too low". |
| If maxmem is set to 59.5G with all other QEMU parameters identical, QEMU |
| should start fine. |
| """ |
| self.vm.add_args('-S', '-machine', 'q35', '-m', |
| '512,slots=1,maxmem=59.6G', |
| '-cpu', 'pentium,pse36=on', '-display', 'none', |
| '-object', 'memory-backend-ram,id=mem1,size=1G', |
| '-device', 'pc-dimm,id=vm0,memdev=mem1') |
| self.vm.set_qmp_monitor(enabled=False) |
| self.vm.launch() |
| self.vm.wait() |
| self.assertEqual(self.vm.exitcode(), 1, "QEMU exit code should be 1") |
| self.assertRegex(self.vm.get_log(), r'phys-bits too low') |
| |
| def test_phybits_low_pae(self): |
| """ |
| :avocado: tags=machine:q35 |
| :avocado: tags=arch:x86_64 |
| |
| With pae feature ON, a processor has 36 bits of addressing. So it can |
| access up to a maximum of 64GiB of memory. Rest is the same as the case |
| with pse36 above. |
| """ |
| self.vm.add_args('-S', '-machine', 'q35', '-m', |
| '512,slots=1,maxmem=59.6G', |
| '-cpu', 'pentium,pae=on', '-display', 'none', |
| '-object', 'memory-backend-ram,id=mem1,size=1G', |
| '-device', 'pc-dimm,id=vm0,memdev=mem1') |
| self.vm.set_qmp_monitor(enabled=False) |
| self.vm.launch() |
| self.vm.wait() |
| self.assertEqual(self.vm.exitcode(), 1, "QEMU exit code should be 1") |
| self.assertRegex(self.vm.get_log(), r'phys-bits too low') |
| |
| def test_phybits_ok_pentium_pse36(self): |
| """ |
| :avocado: tags=machine:q35 |
| :avocado: tags=arch:x86_64 |
| |
| Setting maxmem to 59.5G and making sure that QEMU can start with the |
| same options as the failing case above with pse36 cpu feature. |
| """ |
| self.vm.add_args('-machine', 'q35', '-m', |
| '512,slots=1,maxmem=59.5G', |
| '-cpu', 'pentium,pse36=on', '-display', 'none', |
| '-object', 'memory-backend-ram,id=mem1,size=1G', |
| '-device', 'pc-dimm,id=vm0,memdev=mem1') |
| self.vm.set_qmp_monitor(enabled=False) |
| self.vm.launch() |
| time.sleep(self.DELAY_Q35_BOOT_SEQUENCE) |
| self.vm.shutdown() |
| self.assertNotRegex(self.vm.get_log(), r'phys-bits too low') |
| |
| def test_phybits_ok_pentium_pae(self): |
| """ |
| :avocado: tags=machine:q35 |
| :avocado: tags=arch:x86_64 |
| |
| Test is same as above but now with pae cpu feature turned on. |
| Setting maxmem to 59.5G and making sure that QEMU can start fine |
| with the same options as the case above. |
| """ |
| self.vm.add_args('-machine', 'q35', '-m', |
| '512,slots=1,maxmem=59.5G', |
| '-cpu', 'pentium,pae=on', '-display', 'none', |
| '-object', 'memory-backend-ram,id=mem1,size=1G', |
| '-device', 'pc-dimm,id=vm0,memdev=mem1') |
| self.vm.set_qmp_monitor(enabled=False) |
| self.vm.launch() |
| time.sleep(self.DELAY_Q35_BOOT_SEQUENCE) |
| self.vm.shutdown() |
| self.assertNotRegex(self.vm.get_log(), r'phys-bits too low') |
| |
| def test_phybits_ok_pentium2(self): |
| """ |
| :avocado: tags=machine:q35 |
| :avocado: tags=arch:x86_64 |
| |
| Pentium2 has 36 bits of addressing, so its same as pentium |
| with pse36 ON. |
| """ |
| self.vm.add_args('-machine', 'q35', '-m', |
| '512,slots=1,maxmem=59.5G', |
| '-cpu', 'pentium2', '-display', 'none', |
| '-object', 'memory-backend-ram,id=mem1,size=1G', |
| '-device', 'pc-dimm,id=vm0,memdev=mem1') |
| self.vm.set_qmp_monitor(enabled=False) |
| self.vm.launch() |
| time.sleep(self.DELAY_Q35_BOOT_SEQUENCE) |
| self.vm.shutdown() |
| self.assertNotRegex(self.vm.get_log(), r'phys-bits too low') |
| |
| def test_phybits_low_nonpse36(self): |
| """ |
| :avocado: tags=machine:q35 |
| :avocado: tags=arch:x86_64 |
| |
| Pentium processor has 32 bits of addressing without pse36 or pae |
| so it can access physical address up to 4 GiB. Setting maxmem to |
| 4 GiB should make QEMU fail to start with "phys-bits too low" |
| message because the region for memory hotplug is always placed |
| above 4 GiB due to the PCI hole and simplicity. |
| """ |
| self.vm.add_args('-S', '-machine', 'q35', '-m', |
| '512,slots=1,maxmem=4G', |
| '-cpu', 'pentium', '-display', 'none', |
| '-object', 'memory-backend-ram,id=mem1,size=1G', |
| '-device', 'pc-dimm,id=vm0,memdev=mem1') |
| self.vm.set_qmp_monitor(enabled=False) |
| self.vm.launch() |
| self.vm.wait() |
| self.assertEqual(self.vm.exitcode(), 1, "QEMU exit code should be 1") |
| self.assertRegex(self.vm.get_log(), r'phys-bits too low') |
| |
| # now lets test some 64-bit CPU cases. |
| def test_phybits_low_tcg_q35_70_amd(self): |
| """ |
| :avocado: tags=machine:q35 |
| :avocado: tags=arch:x86_64 |
| |
| For q35 7.1 machines and above, there is a HT window that starts at |
| 1024 GiB and ends at 1 TiB - 1. If the max GPA falls in this range, |
| "above_4G" memory is adjusted to start at 1 TiB boundary for AMD cpus |
| in the default case. Lets test without that case for machines 7.0. |
| For q35-7.0 machines, "above 4G" memory starts are 4G. |
| pci64_hole size is 32 GiB. Since TCG_PHYS_ADDR_BITS is defined to |
| be 40, TCG emulated CPUs have maximum of 1 TiB (1024 GiB) of |
| directly addressable memory. |
| Hence, maxmem value at most can be |
| 1024 GiB - 4 GiB - 1 GiB per slot for alignment - 32 GiB + 0.5 GiB |
| which is equal to 987.5 GiB. Setting the value to 988 GiB should |
| make QEMU fail with the error message. |
| """ |
| self.vm.add_args('-S', '-machine', 'pc-q35-7.0', '-m', |
| '512,slots=1,maxmem=988G', |
| '-display', 'none', |
| '-object', 'memory-backend-ram,id=mem1,size=1G', |
| '-device', 'pc-dimm,id=vm0,memdev=mem1') |
| self.vm.set_qmp_monitor(enabled=False) |
| self.vm.launch() |
| self.vm.wait() |
| self.assertEqual(self.vm.exitcode(), 1, "QEMU exit code should be 1") |
| self.assertRegex(self.vm.get_log(), r'phys-bits too low') |
| |
| def test_phybits_low_tcg_q35_71_amd(self): |
| """ |
| :avocado: tags=machine:q35 |
| :avocado: tags=arch:x86_64 |
| |
| AMD_HT_START is defined to be at 1012 GiB. So for q35 machines |
| version > 7.0 and AMD cpus, instead of 1024 GiB limit for 40 bit |
| processor address space, it has to be 1012 GiB , that is 12 GiB |
| less than the case above in order to accommodate HT hole. |
| Make sure QEMU fails when maxmem size is 976 GiB (12 GiB less |
| than 988 GiB). |
| """ |
| self.vm.add_args('-S', '-machine', 'pc-q35-7.1', '-m', |
| '512,slots=1,maxmem=976G', |
| '-display', 'none', |
| '-object', 'memory-backend-ram,id=mem1,size=1G', |
| '-device', 'pc-dimm,id=vm0,memdev=mem1') |
| self.vm.set_qmp_monitor(enabled=False) |
| self.vm.launch() |
| self.vm.wait() |
| self.assertEqual(self.vm.exitcode(), 1, "QEMU exit code should be 1") |
| self.assertRegex(self.vm.get_log(), r'phys-bits too low') |
| |
| def test_phybits_ok_tcg_q35_70_amd(self): |
| """ |
| :avocado: tags=machine:q35 |
| :avocado: tags=arch:x86_64 |
| |
| Same as q35-7.0 AMD case except that here we check that QEMU can |
| successfully start when maxmem is < 988G. |
| """ |
| self.vm.add_args('-S', '-machine', 'pc-q35-7.0', '-m', |
| '512,slots=1,maxmem=987.5G', |
| '-display', 'none', |
| '-object', 'memory-backend-ram,id=mem1,size=1G', |
| '-device', 'pc-dimm,id=vm0,memdev=mem1') |
| self.vm.set_qmp_monitor(enabled=False) |
| self.vm.launch() |
| time.sleep(self.DELAY_Q35_BOOT_SEQUENCE) |
| self.vm.shutdown() |
| self.assertNotRegex(self.vm.get_log(), r'phys-bits too low') |
| |
| def test_phybits_ok_tcg_q35_71_amd(self): |
| """ |
| :avocado: tags=machine:q35 |
| :avocado: tags=arch:x86_64 |
| |
| Same as q35-7.1 AMD case except that here we check that QEMU can |
| successfully start when maxmem is < 976G. |
| """ |
| self.vm.add_args('-S', '-machine', 'pc-q35-7.1', '-m', |
| '512,slots=1,maxmem=975.5G', |
| '-display', 'none', |
| '-object', 'memory-backend-ram,id=mem1,size=1G', |
| '-device', 'pc-dimm,id=vm0,memdev=mem1') |
| self.vm.set_qmp_monitor(enabled=False) |
| self.vm.launch() |
| time.sleep(self.DELAY_Q35_BOOT_SEQUENCE) |
| self.vm.shutdown() |
| self.assertNotRegex(self.vm.get_log(), r'phys-bits too low') |
| |
| def test_phybits_ok_tcg_q35_71_intel(self): |
| """ |
| :avocado: tags=machine:q35 |
| :avocado: tags=arch:x86_64 |
| |
| Same parameters as test_phybits_low_tcg_q35_71_amd() but use |
| Intel cpu instead. QEMU should start fine in this case as |
| "above_4G" memory starts at 4G. |
| """ |
| self.vm.add_args('-S', '-cpu', 'Skylake-Server', |
| '-machine', 'pc-q35-7.1', '-m', |
| '512,slots=1,maxmem=976G', |
| '-display', 'none', |
| '-object', 'memory-backend-ram,id=mem1,size=1G', |
| '-device', 'pc-dimm,id=vm0,memdev=mem1') |
| self.vm.set_qmp_monitor(enabled=False) |
| self.vm.launch() |
| time.sleep(self.DELAY_Q35_BOOT_SEQUENCE) |
| self.vm.shutdown() |
| self.assertNotRegex(self.vm.get_log(), r'phys-bits too low') |
| |
| def test_phybits_low_tcg_q35_71_amd_41bits(self): |
| """ |
| :avocado: tags=machine:q35 |
| :avocado: tags=arch:x86_64 |
| |
| AMD processor with 41 bits. Max cpu hw address = 2 TiB. |
| By setting maxram above 1012 GiB - 32 GiB - 4 GiB = 976 GiB, we can |
| force "above_4G" memory to start at 1 TiB for q35-7.1 machines |
| (max GPA will be above AMD_HT_START which is defined as 1012 GiB). |
| |
| With pci_64_hole size at 32 GiB, in this case, maxmem should be 991.5 |
| GiB with 1 GiB per slot for alignment and 0.5 GiB as non-hotplug |
| memory for the VM (1024 - 32 - 1 + 0.5). With 992 GiB, QEMU should |
| fail to start. |
| """ |
| self.vm.add_args('-S', '-cpu', 'EPYC-v4,phys-bits=41', |
| '-machine', 'pc-q35-7.1', '-m', |
| '512,slots=1,maxmem=992G', |
| '-display', 'none', |
| '-object', 'memory-backend-ram,id=mem1,size=1G', |
| '-device', 'pc-dimm,id=vm0,memdev=mem1') |
| self.vm.set_qmp_monitor(enabled=False) |
| self.vm.launch() |
| self.vm.wait() |
| self.assertEqual(self.vm.exitcode(), 1, "QEMU exit code should be 1") |
| self.assertRegex(self.vm.get_log(), r'phys-bits too low') |
| |
| def test_phybits_ok_tcg_q35_71_amd_41bits(self): |
| """ |
| :avocado: tags=machine:q35 |
| :avocado: tags=arch:x86_64 |
| |
| AMD processor with 41 bits. Max cpu hw address = 2 TiB. |
| Same as above but by setting maxram between 976 GiB and 992 Gib, |
| QEMU should start fine. |
| """ |
| self.vm.add_args('-S', '-cpu', 'EPYC-v4,phys-bits=41', |
| '-machine', 'pc-q35-7.1', '-m', |
| '512,slots=1,maxmem=990G', |
| '-display', 'none', |
| '-object', 'memory-backend-ram,id=mem1,size=1G', |
| '-device', 'pc-dimm,id=vm0,memdev=mem1') |
| self.vm.set_qmp_monitor(enabled=False) |
| self.vm.launch() |
| time.sleep(self.DELAY_Q35_BOOT_SEQUENCE) |
| self.vm.shutdown() |
| self.assertNotRegex(self.vm.get_log(), r'phys-bits too low') |
| |
| def test_phybits_low_tcg_q35_intel_cxl(self): |
| """ |
| :avocado: tags=machine:q35 |
| :avocado: tags=arch:x86_64 |
| |
| cxl memory window starts after memory device range. Here, we use 1 GiB |
| of cxl window memory. 4G_mem end aligns at 4G. pci64_hole is 32 GiB and |
| starts after the cxl memory window. |
| So maxmem here should be at most 986 GiB considering all memory boundary |
| alignment constraints with 40 bits (1 TiB) of processor physical bits. |
| """ |
| self.vm.add_args('-S', '-cpu', 'Skylake-Server,phys-bits=40', |
| '-machine', 'q35,cxl=on', '-m', |
| '512,slots=1,maxmem=987G', |
| '-display', 'none', |
| '-device', 'pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1', |
| '-M', 'cxl-fmw.0.targets.0=cxl.1,cxl-fmw.0.size=1G') |
| self.vm.set_qmp_monitor(enabled=False) |
| self.vm.launch() |
| self.vm.wait() |
| self.assertEqual(self.vm.exitcode(), 1, "QEMU exit code should be 1") |
| self.assertRegex(self.vm.get_log(), r'phys-bits too low') |
| |
| def test_phybits_ok_tcg_q35_intel_cxl(self): |
| """ |
| :avocado: tags=machine:q35 |
| :avocado: tags=arch:x86_64 |
| |
| Same as above but here we do not reserve any cxl memory window. Hence, |
| with the exact same parameters as above, QEMU should start fine even |
| with cxl enabled. |
| """ |
| self.vm.add_args('-S', '-cpu', 'Skylake-Server,phys-bits=40', |
| '-machine', 'q35,cxl=on', '-m', |
| '512,slots=1,maxmem=987G', |
| '-display', 'none', |
| '-device', 'pxb-cxl,bus_nr=12,bus=pcie.0,id=cxl.1') |
| self.vm.set_qmp_monitor(enabled=False) |
| self.vm.launch() |
| time.sleep(self.DELAY_Q35_BOOT_SEQUENCE) |
| self.vm.shutdown() |
| self.assertNotRegex(self.vm.get_log(), r'phys-bits too low') |
