| /* |
| * ARMV7M System emulation. |
| * |
| * Copyright (c) 2006-2007 CodeSourcery. |
| * Written by Paul Brook |
| * |
| * This code is licensed under the GPL. |
| */ |
| |
| #include "hw/sysbus.h" |
| #include "hw/arm/arm.h" |
| #include "hw/loader.h" |
| #include "elf.h" |
| #include "sysemu/qtest.h" |
| #include "qemu/error-report.h" |
| |
| /* Bitbanded IO. Each word corresponds to a single bit. */ |
| |
| /* Get the byte address of the real memory for a bitband access. */ |
| static inline uint32_t bitband_addr(void * opaque, uint32_t addr) |
| { |
| uint32_t res; |
| |
| res = *(uint32_t *)opaque; |
| res |= (addr & 0x1ffffff) >> 5; |
| return res; |
| |
| } |
| |
| static uint32_t bitband_readb(void *opaque, hwaddr offset) |
| { |
| uint8_t v; |
| cpu_physical_memory_read(bitband_addr(opaque, offset), &v, 1); |
| return (v & (1 << ((offset >> 2) & 7))) != 0; |
| } |
| |
| static void bitband_writeb(void *opaque, hwaddr offset, |
| uint32_t value) |
| { |
| uint32_t addr; |
| uint8_t mask; |
| uint8_t v; |
| addr = bitband_addr(opaque, offset); |
| mask = (1 << ((offset >> 2) & 7)); |
| cpu_physical_memory_read(addr, &v, 1); |
| if (value & 1) |
| v |= mask; |
| else |
| v &= ~mask; |
| cpu_physical_memory_write(addr, &v, 1); |
| } |
| |
| static uint32_t bitband_readw(void *opaque, hwaddr offset) |
| { |
| uint32_t addr; |
| uint16_t mask; |
| uint16_t v; |
| addr = bitband_addr(opaque, offset) & ~1; |
| mask = (1 << ((offset >> 2) & 15)); |
| mask = tswap16(mask); |
| cpu_physical_memory_read(addr, &v, 2); |
| return (v & mask) != 0; |
| } |
| |
| static void bitband_writew(void *opaque, hwaddr offset, |
| uint32_t value) |
| { |
| uint32_t addr; |
| uint16_t mask; |
| uint16_t v; |
| addr = bitband_addr(opaque, offset) & ~1; |
| mask = (1 << ((offset >> 2) & 15)); |
| mask = tswap16(mask); |
| cpu_physical_memory_read(addr, &v, 2); |
| if (value & 1) |
| v |= mask; |
| else |
| v &= ~mask; |
| cpu_physical_memory_write(addr, &v, 2); |
| } |
| |
| static uint32_t bitband_readl(void *opaque, hwaddr offset) |
| { |
| uint32_t addr; |
| uint32_t mask; |
| uint32_t v; |
| addr = bitband_addr(opaque, offset) & ~3; |
| mask = (1 << ((offset >> 2) & 31)); |
| mask = tswap32(mask); |
| cpu_physical_memory_read(addr, &v, 4); |
| return (v & mask) != 0; |
| } |
| |
| static void bitband_writel(void *opaque, hwaddr offset, |
| uint32_t value) |
| { |
| uint32_t addr; |
| uint32_t mask; |
| uint32_t v; |
| addr = bitband_addr(opaque, offset) & ~3; |
| mask = (1 << ((offset >> 2) & 31)); |
| mask = tswap32(mask); |
| cpu_physical_memory_read(addr, &v, 4); |
| if (value & 1) |
| v |= mask; |
| else |
| v &= ~mask; |
| cpu_physical_memory_write(addr, &v, 4); |
| } |
| |
| static const MemoryRegionOps bitband_ops = { |
| .old_mmio = { |
| .read = { bitband_readb, bitband_readw, bitband_readl, }, |
| .write = { bitband_writeb, bitband_writew, bitband_writel, }, |
| }, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| #define TYPE_BITBAND "ARM,bitband-memory" |
| #define BITBAND(obj) OBJECT_CHECK(BitBandState, (obj), TYPE_BITBAND) |
| |
| typedef struct { |
| /*< private >*/ |
| SysBusDevice parent_obj; |
| /*< public >*/ |
| |
| MemoryRegion iomem; |
| uint32_t base; |
| } BitBandState; |
| |
| static int bitband_init(SysBusDevice *dev) |
| { |
| BitBandState *s = BITBAND(dev); |
| |
| memory_region_init_io(&s->iomem, OBJECT(s), &bitband_ops, &s->base, |
| "bitband", 0x02000000); |
| sysbus_init_mmio(dev, &s->iomem); |
| return 0; |
| } |
| |
| static void armv7m_bitband_init(void) |
| { |
| DeviceState *dev; |
| |
| dev = qdev_create(NULL, TYPE_BITBAND); |
| qdev_prop_set_uint32(dev, "base", 0x20000000); |
| qdev_init_nofail(dev); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0x22000000); |
| |
| dev = qdev_create(NULL, TYPE_BITBAND); |
| qdev_prop_set_uint32(dev, "base", 0x40000000); |
| qdev_init_nofail(dev); |
| sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0x42000000); |
| } |
| |
| /* Board init. */ |
| |
| static void armv7m_reset(void *opaque) |
| { |
| ARMCPU *cpu = opaque; |
| |
| cpu_reset(CPU(cpu)); |
| } |
| |
| /* Init CPU and memory for a v7-M based board. |
| mem_size is in bytes. |
| Returns the NVIC array. */ |
| |
| qemu_irq *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq, |
| const char *kernel_filename, const char *cpu_model) |
| { |
| ARMCPU *cpu; |
| CPUARMState *env; |
| DeviceState *nvic; |
| qemu_irq *pic = g_new(qemu_irq, num_irq); |
| int image_size; |
| uint64_t entry; |
| uint64_t lowaddr; |
| int i; |
| int big_endian; |
| MemoryRegion *hack = g_new(MemoryRegion, 1); |
| |
| if (cpu_model == NULL) { |
| cpu_model = "cortex-m3"; |
| } |
| cpu = cpu_arm_init(cpu_model); |
| if (cpu == NULL) { |
| fprintf(stderr, "Unable to find CPU definition\n"); |
| exit(1); |
| } |
| env = &cpu->env; |
| |
| armv7m_bitband_init(); |
| |
| nvic = qdev_create(NULL, "armv7m_nvic"); |
| qdev_prop_set_uint32(nvic, "num-irq", num_irq); |
| env->nvic = nvic; |
| qdev_init_nofail(nvic); |
| sysbus_connect_irq(SYS_BUS_DEVICE(nvic), 0, |
| qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ)); |
| for (i = 0; i < num_irq; i++) { |
| pic[i] = qdev_get_gpio_in(nvic, i); |
| } |
| |
| #ifdef TARGET_WORDS_BIGENDIAN |
| big_endian = 1; |
| #else |
| big_endian = 0; |
| #endif |
| |
| if (!kernel_filename && !qtest_enabled()) { |
| fprintf(stderr, "Guest image must be specified (using -kernel)\n"); |
| exit(1); |
| } |
| |
| if (kernel_filename) { |
| image_size = load_elf(kernel_filename, NULL, NULL, &entry, &lowaddr, |
| NULL, big_endian, ELF_MACHINE, 1); |
| if (image_size < 0) { |
| image_size = load_image_targphys(kernel_filename, 0, mem_size); |
| lowaddr = 0; |
| } |
| if (image_size < 0) { |
| error_report("Could not load kernel '%s'", kernel_filename); |
| exit(1); |
| } |
| } |
| |
| /* Hack to map an additional page of ram at the top of the address |
| space. This stops qemu complaining about executing code outside RAM |
| when returning from an exception. */ |
| memory_region_init_ram(hack, NULL, "armv7m.hack", 0x1000, &error_abort); |
| vmstate_register_ram_global(hack); |
| memory_region_add_subregion(system_memory, 0xfffff000, hack); |
| |
| qemu_register_reset(armv7m_reset, cpu); |
| return pic; |
| } |
| |
| static Property bitband_properties[] = { |
| DEFINE_PROP_UINT32("base", BitBandState, base, 0), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void bitband_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass); |
| |
| k->init = bitband_init; |
| dc->props = bitband_properties; |
| } |
| |
| static const TypeInfo bitband_info = { |
| .name = TYPE_BITBAND, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(BitBandState), |
| .class_init = bitband_class_init, |
| }; |
| |
| static void armv7m_register_types(void) |
| { |
| type_register_static(&bitband_info); |
| } |
| |
| type_init(armv7m_register_types) |