| = How to convert to -device & friends = |
| |
| === Specifying Bus and Address on Bus === |
| |
| In qdev, each device has a parent bus. Some devices provide one or |
| more buses for children. You can specify a device's parent bus with |
| -device parameter bus. |
| |
| A device typically has a device address on its parent bus. For buses |
| where this address can be configured, devices provide a bus-specific |
| property. Examples: |
| |
| bus property name value format |
| PCI addr %x.%x (dev.fn, .fn optional) |
| I2C address %u |
| SCSI scsi-id %u |
| IDE unit %u |
| HDA cad %u |
| virtio-serial-bus nr %u |
| ccid-bus slot %u |
| USB port %d(.%d)* (port.port...) |
| |
| Example: device i440FX-pcihost is on the root bus, and provides a PCI |
| bus named pci.0. To put a FOO device into its slot 4, use -device |
| FOO,bus=/i440FX-pcihost/pci.0,addr=4. The abbreviated form bus=pci.0 |
| also works as long as the bus name is unique. |
| |
| === Block Devices === |
| |
| A QEMU block device (drive) has a host and a guest part. |
| |
| In the general case, the guest device is connected to a controller |
| device. For instance, the IDE controller provides two IDE buses, each |
| of which can have up to two devices, and each device is a guest part, |
| and is connected to a host part. |
| |
| Except we sometimes lump controller, bus(es) and drive device(s) all |
| together into a single device. For instance, the ISA floppy |
| controller is connected to up to two host drives. |
| |
| The old ways to define block devices define host and guest part |
| together. Sometimes, they can even define a controller device in |
| addition to the block device. |
| |
| The new way keeps the parts separate: you create the host part with |
| -drive, and guest device(s) with -device. |
| |
| The various old ways to define drives all boil down to the common form |
| |
| -drive if=TYPE,bus=BUS,unit=UNIT,OPTS... |
| |
| TYPE, BUS and UNIT identify the controller device, which of its buses |
| to use, and the drive's address on that bus. Details depend on TYPE. |
| |
| Instead of bus=BUS,unit=UNIT, you can also say index=IDX. |
| |
| In the new way, this becomes something like |
| |
| -drive if=none,id=DRIVE-ID,HOST-OPTS... |
| -device DEVNAME,drive=DRIVE-ID,DEV-OPTS... |
| |
| The old OPTS get split into HOST-OPTS and DEV-OPTS as follows: |
| |
| * file, format, snapshot, cache, aio, readonly, rerror, werror go into |
| HOST-OPTS. |
| |
| * cyls, head, secs and trans go into HOST-OPTS. Future work: they |
| should go into DEV-OPTS instead. |
| |
| * serial goes into DEV-OPTS, for devices supporting serial numbers. |
| For other devices, it goes nowhere. |
| |
| * media is special. In the old way, it selects disk vs. CD-ROM with |
| if=ide, if=scsi and if=xen. The new way uses DEVNAME for that. |
| Additionally, readonly=on goes into HOST-OPTS. |
| |
| * addr is special, see if=virtio below. |
| |
| The -device argument differs in detail for each type of drive: |
| |
| * if=ide |
| |
| -device DEVNAME,drive=DRIVE-ID,bus=IDE-BUS,unit=UNIT |
| |
| where DEVNAME is either ide-hd or ide-cd, IDE-BUS identifies an IDE |
| bus, normally either ide.0 or ide.1, and UNIT is either 0 or 1. |
| |
| * if=scsi |
| |
| The old way implicitly creates SCSI controllers as needed. The new |
| way makes that explicit: |
| |
| -device lsi53c895a,id=ID |
| |
| As for all PCI devices, you can add bus=PCI-BUS,addr=DEVFN to |
| control the PCI device address. |
| |
| This SCSI controller provides a single SCSI bus, named ID.0. Put a |
| disk on it: |
| |
| -device DEVNAME,drive=DRIVE-ID,bus=ID.0,scsi-id=UNIT |
| |
| where DEVNAME is either scsi-hd, scsi-cd or scsi-generic. |
| |
| * if=floppy |
| |
| -device floppy,unit=UNIT,drive=DRIVE-ID |
| |
| Without any -device floppy,... you get an empty unit 0 and no unit |
| 1. You can use -nodefaults to suppress the default unit 0, see |
| "Default Devices". |
| |
| * if=virtio |
| |
| -device virtio-blk-pci,drive=DRIVE-ID,class=C,vectors=V,ioeventfd=IOEVENTFD |
| |
| This lets you control PCI device class and MSI-X vectors. |
| |
| IOEVENTFD controls whether or not ioeventfd is used for virtqueue |
| notify. It can be set to on (default) or off. |
| |
| As for all PCI devices, you can add bus=PCI-BUS,addr=DEVFN to |
| control the PCI device address. This replaces option addr available |
| with -drive if=virtio. |
| |
| * if=pflash, if=mtd, if=sd, if=xen are not yet available with -device |
| |
| For USB devices, the old way is actually different: |
| |
| -usbdevice disk:format=FMT:FILENAME |
| |
| Provides much less control than -drive's OPTS... The new way fixes |
| that: |
| |
| -device usb-storage,drive=DRIVE-ID,removable=RMB |
| |
| The removable parameter gives control over the SCSI INQUIRY removable |
| (RMB) bit. USB thumbdrives usually set removable=on, while USB hard |
| disks set removable=off. |
| |
| Bug: usb-storage pretends to be a block device, but it's really a SCSI |
| controller that can serve only a single device, which it creates |
| automatically. The automatic creation guesses what kind of guest part |
| to create from the host part, like -drive if=scsi. Host and guest |
| part are not cleanly separated. |
| |
| === Character Devices === |
| |
| A QEMU character device has a host and a guest part. |
| |
| The old ways to define character devices define host and guest part |
| together. |
| |
| The new way keeps the parts separate: you create the host part with |
| -chardev, and the guest device with -device. |
| |
| The various old ways to define a character device are all of the |
| general form |
| |
| -FOO FOO-OPTS...,LEGACY-CHARDEV |
| |
| where FOO-OPTS... is specific to -FOO, and the host part |
| LEGACY-CHARDEV is the same everywhere. |
| |
| In the new way, this becomes |
| |
| -chardev HOST-OPTS...,id=CHR-ID |
| -device DEVNAME,chardev=CHR-ID,DEV-OPTS... |
| |
| The appropriate DEVNAME depends on the machine type. For type "pc": |
| |
| * -serial becomes -device isa-serial,iobase=IOADDR,irq=IRQ,index=IDX |
| |
| This lets you control I/O ports and IRQs. |
| |
| * -parallel becomes -device isa-parallel,iobase=IOADDR,irq=IRQ,index=IDX |
| |
| This lets you control I/O ports and IRQs. |
| |
| * -usbdevice serial::chardev becomes -device usb-serial,chardev=dev. |
| |
| * -usbdevice braille doesn't support LEGACY-CHARDEV syntax. It always |
| uses "braille". With -device, this useful default is gone, so you |
| have to use something like |
| |
| -device usb-braille,chardev=braille -chardev braille,id=braille |
| |
| LEGACY-CHARDEV translates to -chardev HOST-OPTS... as follows: |
| |
| * null becomes -chardev null |
| |
| * pty, msmouse, wctablet, braille, stdio likewise |
| |
| * vc:WIDTHxHEIGHT becomes -chardev vc,width=WIDTH,height=HEIGHT |
| |
| * vc:<COLS>Cx<ROWS>C becomes -chardev vc,cols=<COLS>,rows=<ROWS> |
| |
| * con: becomes -chardev console |
| |
| * COM<NUM> becomes -chardev serial,path=COM<NUM> |
| |
| * file:FNAME becomes -chardev file,path=FNAME |
| |
| * pipe:FNAME becomes -chardev pipe,path=FNAME |
| |
| * tcp:HOST:PORT,OPTS... becomes -chardev socket,host=HOST,port=PORT,OPTS... |
| |
| * telnet:HOST:PORT,OPTS... becomes |
| -chardev socket,host=HOST,port=PORT,OPTS...,telnet=on |
| |
| * udp:HOST:PORT@LOCALADDR:LOCALPORT becomes |
| -chardev udp,host=HOST,port=PORT,localaddr=LOCALADDR,localport=LOCALPORT |
| |
| * unix:FNAME becomes -chardev socket,path=FNAME |
| |
| * /dev/parportN becomes -chardev parport,file=/dev/parportN |
| |
| * /dev/ppiN likewise |
| |
| * Any other /dev/FNAME becomes -chardev tty,path=/dev/FNAME |
| |
| * mon:LEGACY-CHARDEV is special: it multiplexes the monitor onto the |
| character device defined by LEGACY-CHARDEV. -chardev provides more |
| general multiplexing instead: you can connect up to four users to a |
| single host part. You need to pass mux=on to -chardev to enable |
| switching the input focus. |
| |
| QEMU uses LEGACY-CHARDEV syntax not just to set up guest devices, but |
| also in various other places such as -monitor or -net |
| user,guestfwd=... You can use chardev:CHR-ID in place of |
| LEGACY-CHARDEV to refer to a host part defined with -chardev. |
| |
| === Network Devices === |
| |
| Host and guest part of network devices have always been separate. |
| |
| The old way to define the guest part looks like this: |
| |
| -net nic,netdev=NET-ID,macaddr=MACADDR,model=MODEL,name=ID,addr=STR,vectors=V |
| |
| Except for USB it looks like this: |
| |
| -usbdevice net:netdev=NET-ID,macaddr=MACADDR,name=ID |
| |
| The new way is -device: |
| |
| -device DEVNAME,netdev=NET-ID,mac=MACADDR,DEV-OPTS... |
| |
| DEVNAME equals MODEL, except for virtio you have to name the virtio |
| device appropriate for the bus (virtio-net-pci for PCI), and for USB |
| you have to use usb-net. |
| |
| The old name=ID parameter becomes the usual id=ID with -device. |
| |
| For PCI devices, you can add bus=PCI-BUS,addr=DEVFN to control the PCI |
| device address, as usual. The old -net nic provides parameter addr |
| for that, which is silently ignored when the NIC is not a PCI device. |
| |
| For virtio-net-pci, you can control whether or not ioeventfd is used for |
| virtqueue notify by setting ioeventfd= to on or off (default). |
| |
| -net nic accepts vectors=V for all models, but it's silently ignored |
| except for virtio-net-pci (model=virtio). With -device, only devices |
| that support it accept it. |
| |
| Not all devices are available with -device at this time. All PCI |
| devices and ne2k_isa are. |
| |
| Some PCI devices aren't available with -net nic, e.g. i82558a. |
| |
| === Graphics Devices === |
| |
| Host and guest part of graphics devices have always been separate. |
| |
| The old way to define the guest graphics device is -vga VGA. Not all |
| machines support all -vga options. |
| |
| The new way is -device. The mapping from -vga argument to -device |
| depends on the machine type. For machine "pc", it's: |
| |
| std -device VGA |
| cirrus -device cirrus-vga |
| vmware -device vmware-svga |
| qxl -device qxl-vga |
| none -nodefaults |
| disables more than just VGA, see "Default Devices" |
| |
| As for all PCI devices, you can add bus=PCI-BUS,addr=DEVFN to control |
| the PCI device address. |
| |
| -device VGA supports properties bios-offset and bios-size, but they |
| aren't used with machine type "pc". |
| |
| For machine "isapc", it's |
| |
| std -device isa-vga |
| cirrus not yet available with -device |
| none -nodefaults |
| disables more than just VGA, see "Default Devices" |
| |
| Bug: the new way doesn't work for machine types "pc" and "isapc", |
| because it violates obscure device initialization ordering |
| constraints. |
| |
| === Audio Devices === |
| |
| Host and guest part of audio devices have always been separate. |
| |
| The old way to define guest audio devices is -soundhw C1,... |
| |
| The new way is to define each guest audio device separately with |
| -device. |
| |
| Map from -soundhw sound card name to -device: |
| |
| ac97 -device AC97 |
| cs4231a -device cs4231a,iobase=IOADDR,irq=IRQ,dma=DMA |
| es1370 -device ES1370 |
| gus -device gus,iobase=IOADDR,irq=IRQ,dma=DMA,freq=F |
| hda -device intel-hda,msi=MSI -device hda-duplex |
| sb16 -device sb16,iobase=IOADDR,irq=IRQ,dma=DMA,dma16=DMA16,version=V |
| adlib not yet available with -device |
| pcspk not yet available with -device |
| |
| For PCI devices, you can add bus=PCI-BUS,addr=DEVFN to control the PCI |
| device address, as usual. |
| |
| === USB Devices === |
| |
| The old way to define a virtual USB device is -usbdevice DRIVER:OPTS... |
| |
| The new way is -device DEVNAME,DEV-OPTS... Details depend on DRIVER: |
| |
| * ccid -device usb-ccid |
| * keyboard -device usb-kbd |
| * mouse -device usb-mouse |
| * tablet -device usb-tablet |
| * wacom-tablet -device usb-wacom-tablet |
| * host:... See "Host Device Assignment" |
| * disk:... See "Block Devices" |
| * serial:... See "Character Devices" |
| * braille See "Character Devices" |
| * net:... See "Network Devices" |
| * bt:... not yet available with -device |
| |
| === Watchdog Devices === |
| |
| Host and guest part of watchdog devices have always been separate. |
| |
| The old way to define a guest watchdog device is -watchdog DEVNAME. |
| The new way is -device DEVNAME. For PCI devices, you can add |
| bus=PCI-BUS,addr=DEVFN to control the PCI device address, as usual. |
| |
| === Host Device Assignment === |
| |
| QEMU supports assigning host PCI devices (qemu-kvm only at this time) |
| and host USB devices. PCI devices can only be assigned with -device: |
| |
| -device vfio-pci,host=ADDR,id=ID |
| |
| The old way to assign a host USB device is |
| |
| -usbdevice host:auto:BUS.ADDR:VID:PRID |
| |
| where any of BUS, ADDR, VID, PRID can be the wildcard *. |
| |
| The new way is |
| |
| -device usb-host,hostbus=BUS,hostaddr=ADDR,vendorid=VID,productid=PRID |
| |
| Omitted options match anything, just like the old way's wildcard. |
| |
| === Default Devices === |
| |
| QEMU creates a number of devices by default, depending on the machine |
| type. |
| |
| -device DEVNAME... and global DEVNAME... suppress default devices for |
| some DEVNAMEs: |
| |
| default device suppressing DEVNAMEs |
| CD-ROM ide-cd, ide-drive, ide-hd, scsi-cd, scsi-hd |
| floppy floppy, isa-fdc |
| parallel isa-parallel |
| serial isa-serial |
| VGA VGA, cirrus-vga, isa-vga, isa-cirrus-vga, |
| vmware-svga, qxl-vga, virtio-vga, ati-vga, |
| vhost-user-vga |
| |
| The default NIC is connected to a default part created along with it. |
| It is *not* suppressed by configuring a NIC with -device (you may call |
| that a bug). -net and -netdev suppress the default NIC. |
| |
| -nodefaults suppresses all the default devices mentioned above, plus a |
| few other things such as default SD-Card drive and default monitor. |
