| /* |
| * Virtio MMIO bindings |
| * |
| * Copyright (c) 2011 Linaro Limited |
| * |
| * Author: |
| * Peter Maydell <peter.maydell@linaro.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "hw/sysbus.h" |
| #include "hw/virtio/virtio.h" |
| #include "qemu/host-utils.h" |
| #include "sysemu/kvm.h" |
| #include "hw/virtio/virtio-bus.h" |
| #include "qemu/error-report.h" |
| |
| /* #define DEBUG_VIRTIO_MMIO */ |
| |
| #ifdef DEBUG_VIRTIO_MMIO |
| |
| #define DPRINTF(fmt, ...) \ |
| do { printf("virtio_mmio: " fmt , ## __VA_ARGS__); } while (0) |
| #else |
| #define DPRINTF(fmt, ...) do {} while (0) |
| #endif |
| |
| /* QOM macros */ |
| /* virtio-mmio-bus */ |
| #define TYPE_VIRTIO_MMIO_BUS "virtio-mmio-bus" |
| #define VIRTIO_MMIO_BUS(obj) \ |
| OBJECT_CHECK(VirtioBusState, (obj), TYPE_VIRTIO_MMIO_BUS) |
| #define VIRTIO_MMIO_BUS_GET_CLASS(obj) \ |
| OBJECT_GET_CLASS(VirtioBusClass, (obj), TYPE_VIRTIO_MMIO_BUS) |
| #define VIRTIO_MMIO_BUS_CLASS(klass) \ |
| OBJECT_CLASS_CHECK(VirtioBusClass, (klass), TYPE_VIRTIO_MMIO_BUS) |
| |
| /* virtio-mmio */ |
| #define TYPE_VIRTIO_MMIO "virtio-mmio" |
| #define VIRTIO_MMIO(obj) \ |
| OBJECT_CHECK(VirtIOMMIOProxy, (obj), TYPE_VIRTIO_MMIO) |
| |
| /* Memory mapped register offsets */ |
| #define VIRTIO_MMIO_MAGIC 0x0 |
| #define VIRTIO_MMIO_VERSION 0x4 |
| #define VIRTIO_MMIO_DEVICEID 0x8 |
| #define VIRTIO_MMIO_VENDORID 0xc |
| #define VIRTIO_MMIO_HOSTFEATURES 0x10 |
| #define VIRTIO_MMIO_HOSTFEATURESSEL 0x14 |
| #define VIRTIO_MMIO_GUESTFEATURES 0x20 |
| #define VIRTIO_MMIO_GUESTFEATURESSEL 0x24 |
| #define VIRTIO_MMIO_GUESTPAGESIZE 0x28 |
| #define VIRTIO_MMIO_QUEUESEL 0x30 |
| #define VIRTIO_MMIO_QUEUENUMMAX 0x34 |
| #define VIRTIO_MMIO_QUEUENUM 0x38 |
| #define VIRTIO_MMIO_QUEUEALIGN 0x3c |
| #define VIRTIO_MMIO_QUEUEPFN 0x40 |
| #define VIRTIO_MMIO_QUEUENOTIFY 0x50 |
| #define VIRTIO_MMIO_INTERRUPTSTATUS 0x60 |
| #define VIRTIO_MMIO_INTERRUPTACK 0x64 |
| #define VIRTIO_MMIO_STATUS 0x70 |
| /* Device specific config space starts here */ |
| #define VIRTIO_MMIO_CONFIG 0x100 |
| |
| #define VIRT_MAGIC 0x74726976 /* 'virt' */ |
| #define VIRT_VERSION 1 |
| #define VIRT_VENDOR 0x554D4551 /* 'QEMU' */ |
| |
| typedef struct { |
| /* Generic */ |
| SysBusDevice parent_obj; |
| MemoryRegion iomem; |
| qemu_irq irq; |
| /* Guest accessible state needing migration and reset */ |
| uint32_t host_features_sel; |
| uint32_t guest_features_sel; |
| uint32_t guest_page_shift; |
| /* virtio-bus */ |
| VirtioBusState bus; |
| bool ioeventfd_disabled; |
| bool ioeventfd_started; |
| bool format_transport_address; |
| } VirtIOMMIOProxy; |
| |
| static bool virtio_mmio_ioeventfd_started(DeviceState *d) |
| { |
| VirtIOMMIOProxy *proxy = VIRTIO_MMIO(d); |
| |
| return proxy->ioeventfd_started; |
| } |
| |
| static void virtio_mmio_ioeventfd_set_started(DeviceState *d, bool started, |
| bool err) |
| { |
| VirtIOMMIOProxy *proxy = VIRTIO_MMIO(d); |
| |
| proxy->ioeventfd_started = started; |
| } |
| |
| static bool virtio_mmio_ioeventfd_disabled(DeviceState *d) |
| { |
| VirtIOMMIOProxy *proxy = VIRTIO_MMIO(d); |
| |
| return !kvm_eventfds_enabled() || proxy->ioeventfd_disabled; |
| } |
| |
| static void virtio_mmio_ioeventfd_set_disabled(DeviceState *d, bool disabled) |
| { |
| VirtIOMMIOProxy *proxy = VIRTIO_MMIO(d); |
| |
| proxy->ioeventfd_disabled = disabled; |
| } |
| |
| static int virtio_mmio_ioeventfd_assign(DeviceState *d, |
| EventNotifier *notifier, |
| int n, bool assign) |
| { |
| VirtIOMMIOProxy *proxy = VIRTIO_MMIO(d); |
| |
| if (assign) { |
| memory_region_add_eventfd(&proxy->iomem, VIRTIO_MMIO_QUEUENOTIFY, 4, |
| true, n, notifier); |
| } else { |
| memory_region_del_eventfd(&proxy->iomem, VIRTIO_MMIO_QUEUENOTIFY, 4, |
| true, n, notifier); |
| } |
| return 0; |
| } |
| |
| static void virtio_mmio_start_ioeventfd(VirtIOMMIOProxy *proxy) |
| { |
| virtio_bus_start_ioeventfd(&proxy->bus); |
| } |
| |
| static void virtio_mmio_stop_ioeventfd(VirtIOMMIOProxy *proxy) |
| { |
| virtio_bus_stop_ioeventfd(&proxy->bus); |
| } |
| |
| static uint64_t virtio_mmio_read(void *opaque, hwaddr offset, unsigned size) |
| { |
| VirtIOMMIOProxy *proxy = (VirtIOMMIOProxy *)opaque; |
| VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); |
| |
| DPRINTF("virtio_mmio_read offset 0x%x\n", (int)offset); |
| |
| if (!vdev) { |
| /* If no backend is present, we treat most registers as |
| * read-as-zero, except for the magic number, version and |
| * vendor ID. This is not strictly sanctioned by the virtio |
| * spec, but it allows us to provide transports with no backend |
| * plugged in which don't confuse Linux's virtio code: the |
| * probe won't complain about the bad magic number, but the |
| * device ID of zero means no backend will claim it. |
| */ |
| switch (offset) { |
| case VIRTIO_MMIO_MAGIC: |
| return VIRT_MAGIC; |
| case VIRTIO_MMIO_VERSION: |
| return VIRT_VERSION; |
| case VIRTIO_MMIO_VENDORID: |
| return VIRT_VENDOR; |
| default: |
| return 0; |
| } |
| } |
| |
| if (offset >= VIRTIO_MMIO_CONFIG) { |
| offset -= VIRTIO_MMIO_CONFIG; |
| switch (size) { |
| case 1: |
| return virtio_config_readb(vdev, offset); |
| case 2: |
| return virtio_config_readw(vdev, offset); |
| case 4: |
| return virtio_config_readl(vdev, offset); |
| default: |
| abort(); |
| } |
| } |
| if (size != 4) { |
| DPRINTF("wrong size access to register!\n"); |
| return 0; |
| } |
| switch (offset) { |
| case VIRTIO_MMIO_MAGIC: |
| return VIRT_MAGIC; |
| case VIRTIO_MMIO_VERSION: |
| return VIRT_VERSION; |
| case VIRTIO_MMIO_DEVICEID: |
| return vdev->device_id; |
| case VIRTIO_MMIO_VENDORID: |
| return VIRT_VENDOR; |
| case VIRTIO_MMIO_HOSTFEATURES: |
| if (proxy->host_features_sel) { |
| return 0; |
| } |
| return vdev->host_features; |
| case VIRTIO_MMIO_QUEUENUMMAX: |
| if (!virtio_queue_get_num(vdev, vdev->queue_sel)) { |
| return 0; |
| } |
| return VIRTQUEUE_MAX_SIZE; |
| case VIRTIO_MMIO_QUEUEPFN: |
| return virtio_queue_get_addr(vdev, vdev->queue_sel) |
| >> proxy->guest_page_shift; |
| case VIRTIO_MMIO_INTERRUPTSTATUS: |
| return vdev->isr; |
| case VIRTIO_MMIO_STATUS: |
| return vdev->status; |
| case VIRTIO_MMIO_HOSTFEATURESSEL: |
| case VIRTIO_MMIO_GUESTFEATURES: |
| case VIRTIO_MMIO_GUESTFEATURESSEL: |
| case VIRTIO_MMIO_GUESTPAGESIZE: |
| case VIRTIO_MMIO_QUEUESEL: |
| case VIRTIO_MMIO_QUEUENUM: |
| case VIRTIO_MMIO_QUEUEALIGN: |
| case VIRTIO_MMIO_QUEUENOTIFY: |
| case VIRTIO_MMIO_INTERRUPTACK: |
| DPRINTF("read of write-only register\n"); |
| return 0; |
| default: |
| DPRINTF("bad register offset\n"); |
| return 0; |
| } |
| return 0; |
| } |
| |
| static void virtio_mmio_write(void *opaque, hwaddr offset, uint64_t value, |
| unsigned size) |
| { |
| VirtIOMMIOProxy *proxy = (VirtIOMMIOProxy *)opaque; |
| VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); |
| |
| DPRINTF("virtio_mmio_write offset 0x%x value 0x%" PRIx64 "\n", |
| (int)offset, value); |
| |
| if (!vdev) { |
| /* If no backend is present, we just make all registers |
| * write-ignored. This allows us to provide transports with |
| * no backend plugged in. |
| */ |
| return; |
| } |
| |
| if (offset >= VIRTIO_MMIO_CONFIG) { |
| offset -= VIRTIO_MMIO_CONFIG; |
| switch (size) { |
| case 1: |
| virtio_config_writeb(vdev, offset, value); |
| break; |
| case 2: |
| virtio_config_writew(vdev, offset, value); |
| break; |
| case 4: |
| virtio_config_writel(vdev, offset, value); |
| break; |
| default: |
| abort(); |
| } |
| return; |
| } |
| if (size != 4) { |
| DPRINTF("wrong size access to register!\n"); |
| return; |
| } |
| switch (offset) { |
| case VIRTIO_MMIO_HOSTFEATURESSEL: |
| proxy->host_features_sel = value; |
| break; |
| case VIRTIO_MMIO_GUESTFEATURES: |
| if (!proxy->guest_features_sel) { |
| virtio_set_features(vdev, value); |
| } |
| break; |
| case VIRTIO_MMIO_GUESTFEATURESSEL: |
| proxy->guest_features_sel = value; |
| break; |
| case VIRTIO_MMIO_GUESTPAGESIZE: |
| proxy->guest_page_shift = ctz32(value); |
| if (proxy->guest_page_shift > 31) { |
| proxy->guest_page_shift = 0; |
| } |
| DPRINTF("guest page size %" PRIx64 " shift %d\n", value, |
| proxy->guest_page_shift); |
| break; |
| case VIRTIO_MMIO_QUEUESEL: |
| if (value < VIRTIO_QUEUE_MAX) { |
| vdev->queue_sel = value; |
| } |
| break; |
| case VIRTIO_MMIO_QUEUENUM: |
| DPRINTF("mmio_queue write %d max %d\n", (int)value, VIRTQUEUE_MAX_SIZE); |
| virtio_queue_set_num(vdev, vdev->queue_sel, value); |
| /* Note: only call this function for legacy devices */ |
| virtio_queue_update_rings(vdev, vdev->queue_sel); |
| break; |
| case VIRTIO_MMIO_QUEUEALIGN: |
| /* Note: this is only valid for legacy devices */ |
| virtio_queue_set_align(vdev, vdev->queue_sel, value); |
| break; |
| case VIRTIO_MMIO_QUEUEPFN: |
| if (value == 0) { |
| virtio_reset(vdev); |
| } else { |
| virtio_queue_set_addr(vdev, vdev->queue_sel, |
| value << proxy->guest_page_shift); |
| } |
| break; |
| case VIRTIO_MMIO_QUEUENOTIFY: |
| if (value < VIRTIO_QUEUE_MAX) { |
| virtio_queue_notify(vdev, value); |
| } |
| break; |
| case VIRTIO_MMIO_INTERRUPTACK: |
| vdev->isr &= ~value; |
| virtio_update_irq(vdev); |
| break; |
| case VIRTIO_MMIO_STATUS: |
| if (!(value & VIRTIO_CONFIG_S_DRIVER_OK)) { |
| virtio_mmio_stop_ioeventfd(proxy); |
| } |
| |
| virtio_set_status(vdev, value & 0xff); |
| |
| if (value & VIRTIO_CONFIG_S_DRIVER_OK) { |
| virtio_mmio_start_ioeventfd(proxy); |
| } |
| |
| if (vdev->status == 0) { |
| virtio_reset(vdev); |
| } |
| break; |
| case VIRTIO_MMIO_MAGIC: |
| case VIRTIO_MMIO_VERSION: |
| case VIRTIO_MMIO_DEVICEID: |
| case VIRTIO_MMIO_VENDORID: |
| case VIRTIO_MMIO_HOSTFEATURES: |
| case VIRTIO_MMIO_QUEUENUMMAX: |
| case VIRTIO_MMIO_INTERRUPTSTATUS: |
| DPRINTF("write to readonly register\n"); |
| break; |
| |
| default: |
| DPRINTF("bad register offset\n"); |
| } |
| } |
| |
| static const MemoryRegionOps virtio_mem_ops = { |
| .read = virtio_mmio_read, |
| .write = virtio_mmio_write, |
| .endianness = DEVICE_NATIVE_ENDIAN, |
| }; |
| |
| static void virtio_mmio_update_irq(DeviceState *opaque, uint16_t vector) |
| { |
| VirtIOMMIOProxy *proxy = VIRTIO_MMIO(opaque); |
| VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); |
| int level; |
| |
| if (!vdev) { |
| return; |
| } |
| level = (vdev->isr != 0); |
| DPRINTF("virtio_mmio setting IRQ %d\n", level); |
| qemu_set_irq(proxy->irq, level); |
| } |
| |
| static int virtio_mmio_load_config(DeviceState *opaque, QEMUFile *f) |
| { |
| VirtIOMMIOProxy *proxy = VIRTIO_MMIO(opaque); |
| |
| proxy->host_features_sel = qemu_get_be32(f); |
| proxy->guest_features_sel = qemu_get_be32(f); |
| proxy->guest_page_shift = qemu_get_be32(f); |
| return 0; |
| } |
| |
| static void virtio_mmio_save_config(DeviceState *opaque, QEMUFile *f) |
| { |
| VirtIOMMIOProxy *proxy = VIRTIO_MMIO(opaque); |
| |
| qemu_put_be32(f, proxy->host_features_sel); |
| qemu_put_be32(f, proxy->guest_features_sel); |
| qemu_put_be32(f, proxy->guest_page_shift); |
| } |
| |
| static void virtio_mmio_reset(DeviceState *d) |
| { |
| VirtIOMMIOProxy *proxy = VIRTIO_MMIO(d); |
| |
| virtio_mmio_stop_ioeventfd(proxy); |
| virtio_bus_reset(&proxy->bus); |
| proxy->host_features_sel = 0; |
| proxy->guest_features_sel = 0; |
| proxy->guest_page_shift = 0; |
| } |
| |
| static int virtio_mmio_set_guest_notifier(DeviceState *d, int n, bool assign, |
| bool with_irqfd) |
| { |
| VirtIOMMIOProxy *proxy = VIRTIO_MMIO(d); |
| VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); |
| VirtioDeviceClass *vdc = VIRTIO_DEVICE_GET_CLASS(vdev); |
| VirtQueue *vq = virtio_get_queue(vdev, n); |
| EventNotifier *notifier = virtio_queue_get_guest_notifier(vq); |
| |
| if (assign) { |
| int r = event_notifier_init(notifier, 0); |
| if (r < 0) { |
| return r; |
| } |
| virtio_queue_set_guest_notifier_fd_handler(vq, true, with_irqfd); |
| } else { |
| virtio_queue_set_guest_notifier_fd_handler(vq, false, with_irqfd); |
| event_notifier_cleanup(notifier); |
| } |
| |
| if (vdc->guest_notifier_mask) { |
| vdc->guest_notifier_mask(vdev, n, !assign); |
| } |
| |
| return 0; |
| } |
| |
| static int virtio_mmio_set_guest_notifiers(DeviceState *d, int nvqs, |
| bool assign) |
| { |
| VirtIOMMIOProxy *proxy = VIRTIO_MMIO(d); |
| VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus); |
| /* TODO: need to check if kvm-arm supports irqfd */ |
| bool with_irqfd = false; |
| int r, n; |
| |
| nvqs = MIN(nvqs, VIRTIO_QUEUE_MAX); |
| |
| for (n = 0; n < nvqs; n++) { |
| if (!virtio_queue_get_num(vdev, n)) { |
| break; |
| } |
| |
| r = virtio_mmio_set_guest_notifier(d, n, assign, with_irqfd); |
| if (r < 0) { |
| goto assign_error; |
| } |
| } |
| |
| return 0; |
| |
| assign_error: |
| /* We get here on assignment failure. Recover by undoing for VQs 0 .. n. */ |
| assert(assign); |
| while (--n >= 0) { |
| virtio_mmio_set_guest_notifier(d, n, !assign, false); |
| } |
| return r; |
| } |
| |
| /* virtio-mmio device */ |
| |
| static Property virtio_mmio_properties[] = { |
| DEFINE_PROP_BOOL("format_transport_address", VirtIOMMIOProxy, |
| format_transport_address, true), |
| DEFINE_PROP_END_OF_LIST(), |
| }; |
| |
| static void virtio_mmio_realizefn(DeviceState *d, Error **errp) |
| { |
| VirtIOMMIOProxy *proxy = VIRTIO_MMIO(d); |
| SysBusDevice *sbd = SYS_BUS_DEVICE(d); |
| |
| qbus_create_inplace(&proxy->bus, sizeof(proxy->bus), TYPE_VIRTIO_MMIO_BUS, |
| d, NULL); |
| sysbus_init_irq(sbd, &proxy->irq); |
| memory_region_init_io(&proxy->iomem, OBJECT(d), &virtio_mem_ops, proxy, |
| TYPE_VIRTIO_MMIO, 0x200); |
| sysbus_init_mmio(sbd, &proxy->iomem); |
| } |
| |
| static void virtio_mmio_class_init(ObjectClass *klass, void *data) |
| { |
| DeviceClass *dc = DEVICE_CLASS(klass); |
| |
| dc->realize = virtio_mmio_realizefn; |
| dc->reset = virtio_mmio_reset; |
| set_bit(DEVICE_CATEGORY_MISC, dc->categories); |
| dc->props = virtio_mmio_properties; |
| } |
| |
| static const TypeInfo virtio_mmio_info = { |
| .name = TYPE_VIRTIO_MMIO, |
| .parent = TYPE_SYS_BUS_DEVICE, |
| .instance_size = sizeof(VirtIOMMIOProxy), |
| .class_init = virtio_mmio_class_init, |
| }; |
| |
| /* virtio-mmio-bus. */ |
| |
| static char *virtio_mmio_bus_get_dev_path(DeviceState *dev) |
| { |
| BusState *virtio_mmio_bus; |
| VirtIOMMIOProxy *virtio_mmio_proxy; |
| char *proxy_path; |
| SysBusDevice *proxy_sbd; |
| char *path; |
| |
| virtio_mmio_bus = qdev_get_parent_bus(dev); |
| virtio_mmio_proxy = VIRTIO_MMIO(virtio_mmio_bus->parent); |
| proxy_path = qdev_get_dev_path(DEVICE(virtio_mmio_proxy)); |
| |
| /* |
| * If @format_transport_address is false, then we just perform the same as |
| * virtio_bus_get_dev_path(): we delegate the address formatting for the |
| * device on the virtio-mmio bus to the bus that the virtio-mmio proxy |
| * (i.e., the device that implements the virtio-mmio bus) resides on. In |
| * this case the base address of the virtio-mmio transport will be |
| * invisible. |
| */ |
| if (!virtio_mmio_proxy->format_transport_address) { |
| return proxy_path; |
| } |
| |
| /* Otherwise, we append the base address of the transport. */ |
| proxy_sbd = SYS_BUS_DEVICE(virtio_mmio_proxy); |
| assert(proxy_sbd->num_mmio == 1); |
| assert(proxy_sbd->mmio[0].memory == &virtio_mmio_proxy->iomem); |
| |
| if (proxy_path) { |
| path = g_strdup_printf("%s/virtio-mmio@" TARGET_FMT_plx, proxy_path, |
| proxy_sbd->mmio[0].addr); |
| } else { |
| path = g_strdup_printf("virtio-mmio@" TARGET_FMT_plx, |
| proxy_sbd->mmio[0].addr); |
| } |
| g_free(proxy_path); |
| return path; |
| } |
| |
| static void virtio_mmio_bus_class_init(ObjectClass *klass, void *data) |
| { |
| BusClass *bus_class = BUS_CLASS(klass); |
| VirtioBusClass *k = VIRTIO_BUS_CLASS(klass); |
| |
| k->notify = virtio_mmio_update_irq; |
| k->save_config = virtio_mmio_save_config; |
| k->load_config = virtio_mmio_load_config; |
| k->set_guest_notifiers = virtio_mmio_set_guest_notifiers; |
| k->ioeventfd_started = virtio_mmio_ioeventfd_started; |
| k->ioeventfd_set_started = virtio_mmio_ioeventfd_set_started; |
| k->ioeventfd_disabled = virtio_mmio_ioeventfd_disabled; |
| k->ioeventfd_set_disabled = virtio_mmio_ioeventfd_set_disabled; |
| k->ioeventfd_assign = virtio_mmio_ioeventfd_assign; |
| k->has_variable_vring_alignment = true; |
| bus_class->max_dev = 1; |
| bus_class->get_dev_path = virtio_mmio_bus_get_dev_path; |
| } |
| |
| static const TypeInfo virtio_mmio_bus_info = { |
| .name = TYPE_VIRTIO_MMIO_BUS, |
| .parent = TYPE_VIRTIO_BUS, |
| .instance_size = sizeof(VirtioBusState), |
| .class_init = virtio_mmio_bus_class_init, |
| }; |
| |
| static void virtio_mmio_register_types(void) |
| { |
| type_register_static(&virtio_mmio_bus_info); |
| type_register_static(&virtio_mmio_info); |
| } |
| |
| type_init(virtio_mmio_register_types) |