| /* |
| * QEMU IDE Emulation: PCI cmd646 support. |
| * |
| * Copyright (c) 2003 Fabrice Bellard |
| * Copyright (c) 2006 Openedhand Ltd. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a copy |
| * of this software and associated documentation files (the "Software"), to deal |
| * in the Software without restriction, including without limitation the rights |
| * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| * copies of the Software, and to permit persons to whom the Software is |
| * furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| * THE SOFTWARE. |
| */ |
| #include <hw/hw.h> |
| #include <hw/pc.h> |
| #include <hw/pci.h> |
| #include <hw/isa.h> |
| #include "block.h" |
| #include "block_int.h" |
| #include "sysemu.h" |
| #include "dma.h" |
| |
| #include <hw/ide/pci.h> |
| |
| /* CMD646 specific */ |
| #define MRDMODE 0x71 |
| #define MRDMODE_INTR_CH0 0x04 |
| #define MRDMODE_INTR_CH1 0x08 |
| #define MRDMODE_BLK_CH0 0x10 |
| #define MRDMODE_BLK_CH1 0x20 |
| #define UDIDETCR0 0x73 |
| #define UDIDETCR1 0x7B |
| |
| static void cmd646_update_irq(PCIIDEState *d); |
| |
| static void ide_map(PCIDevice *pci_dev, int region_num, |
| pcibus_t addr, pcibus_t size, int type) |
| { |
| PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, pci_dev); |
| IDEBus *bus; |
| |
| if (region_num <= 3) { |
| bus = &d->bus[(region_num >> 1)]; |
| if (region_num & 1) { |
| register_ioport_read(addr + 2, 1, 1, ide_status_read, bus); |
| register_ioport_write(addr + 2, 1, 1, ide_cmd_write, bus); |
| } else { |
| register_ioport_write(addr, 8, 1, ide_ioport_write, bus); |
| register_ioport_read(addr, 8, 1, ide_ioport_read, bus); |
| |
| /* data ports */ |
| register_ioport_write(addr, 2, 2, ide_data_writew, bus); |
| register_ioport_read(addr, 2, 2, ide_data_readw, bus); |
| register_ioport_write(addr, 4, 4, ide_data_writel, bus); |
| register_ioport_read(addr, 4, 4, ide_data_readl, bus); |
| } |
| } |
| } |
| |
| static uint32_t bmdma_readb_common(PCIIDEState *pci_dev, BMDMAState *bm, |
| uint32_t addr) |
| { |
| uint32_t val; |
| |
| switch(addr & 3) { |
| case 0: |
| val = bm->cmd; |
| break; |
| case 1: |
| val = pci_dev->dev.config[MRDMODE]; |
| break; |
| case 2: |
| val = bm->status; |
| break; |
| case 3: |
| if (bm == &pci_dev->bmdma[0]) { |
| val = pci_dev->dev.config[UDIDETCR0]; |
| } else { |
| val = pci_dev->dev.config[UDIDETCR1]; |
| } |
| break; |
| default: |
| val = 0xff; |
| break; |
| } |
| #ifdef DEBUG_IDE |
| printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val); |
| #endif |
| return val; |
| } |
| |
| static uint32_t bmdma_readb_0(void *opaque, uint32_t addr) |
| { |
| PCIIDEState *pci_dev = opaque; |
| BMDMAState *bm = &pci_dev->bmdma[0]; |
| |
| return bmdma_readb_common(pci_dev, bm, addr); |
| } |
| |
| static uint32_t bmdma_readb_1(void *opaque, uint32_t addr) |
| { |
| PCIIDEState *pci_dev = opaque; |
| BMDMAState *bm = &pci_dev->bmdma[1]; |
| |
| return bmdma_readb_common(pci_dev, bm, addr); |
| } |
| |
| static void bmdma_writeb_common(PCIIDEState *pci_dev, BMDMAState *bm, |
| uint32_t addr, uint32_t val) |
| { |
| #ifdef DEBUG_IDE |
| printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val); |
| #endif |
| switch(addr & 3) { |
| case 0: |
| bmdma_cmd_writeb(bm, addr, val); |
| break; |
| case 1: |
| pci_dev->dev.config[MRDMODE] = |
| (pci_dev->dev.config[MRDMODE] & ~0x30) | (val & 0x30); |
| cmd646_update_irq(pci_dev); |
| break; |
| case 2: |
| bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06); |
| break; |
| case 3: |
| if (bm == &pci_dev->bmdma[0]) |
| pci_dev->dev.config[UDIDETCR0] = val; |
| else |
| pci_dev->dev.config[UDIDETCR1] = val; |
| break; |
| } |
| } |
| |
| static void bmdma_writeb_0(void *opaque, uint32_t addr, uint32_t val) |
| { |
| PCIIDEState *pci_dev = opaque; |
| BMDMAState *bm = &pci_dev->bmdma[0]; |
| |
| bmdma_writeb_common(pci_dev, bm, addr, val); |
| } |
| |
| static void bmdma_writeb_1(void *opaque, uint32_t addr, uint32_t val) |
| { |
| PCIIDEState *pci_dev = opaque; |
| BMDMAState *bm = &pci_dev->bmdma[1]; |
| |
| bmdma_writeb_common(pci_dev, bm, addr, val); |
| } |
| |
| static void bmdma_map(PCIDevice *pci_dev, int region_num, |
| pcibus_t addr, pcibus_t size, int type) |
| { |
| PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, pci_dev); |
| int i; |
| |
| for(i = 0;i < 2; i++) { |
| BMDMAState *bm = &d->bmdma[i]; |
| d->bus[i].bmdma = bm; |
| bm->bus = d->bus+i; |
| qemu_add_vm_change_state_handler(ide_dma_restart_cb, bm); |
| |
| if (i == 0) { |
| register_ioport_write(addr, 4, 1, bmdma_writeb_0, d); |
| register_ioport_read(addr, 4, 1, bmdma_readb_0, d); |
| } else { |
| register_ioport_write(addr, 4, 1, bmdma_writeb_1, d); |
| register_ioport_read(addr, 4, 1, bmdma_readb_1, d); |
| } |
| |
| register_ioport_write(addr + 4, 4, 1, bmdma_addr_writeb, bm); |
| register_ioport_read(addr + 4, 4, 1, bmdma_addr_readb, bm); |
| register_ioport_write(addr + 4, 4, 2, bmdma_addr_writew, bm); |
| register_ioport_read(addr + 4, 4, 2, bmdma_addr_readw, bm); |
| register_ioport_write(addr + 4, 4, 4, bmdma_addr_writel, bm); |
| register_ioport_read(addr + 4, 4, 4, bmdma_addr_readl, bm); |
| addr += 8; |
| } |
| } |
| |
| /* XXX: call it also when the MRDMODE is changed from the PCI config |
| registers */ |
| static void cmd646_update_irq(PCIIDEState *d) |
| { |
| int pci_level; |
| pci_level = ((d->dev.config[MRDMODE] & MRDMODE_INTR_CH0) && |
| !(d->dev.config[MRDMODE] & MRDMODE_BLK_CH0)) || |
| ((d->dev.config[MRDMODE] & MRDMODE_INTR_CH1) && |
| !(d->dev.config[MRDMODE] & MRDMODE_BLK_CH1)); |
| qemu_set_irq(d->dev.irq[0], pci_level); |
| } |
| |
| /* the PCI irq level is the logical OR of the two channels */ |
| static void cmd646_set_irq(void *opaque, int channel, int level) |
| { |
| PCIIDEState *d = opaque; |
| int irq_mask; |
| |
| irq_mask = MRDMODE_INTR_CH0 << channel; |
| if (level) |
| d->dev.config[MRDMODE] |= irq_mask; |
| else |
| d->dev.config[MRDMODE] &= ~irq_mask; |
| cmd646_update_irq(d); |
| } |
| |
| static void cmd646_reset(void *opaque) |
| { |
| PCIIDEState *d = opaque; |
| unsigned int i; |
| |
| for (i = 0; i < 2; i++) { |
| ide_bus_reset(&d->bus[i]); |
| ide_dma_reset(&d->bmdma[i]); |
| } |
| } |
| |
| /* CMD646 PCI IDE controller */ |
| static int pci_cmd646_ide_initfn(PCIDevice *dev) |
| { |
| PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev); |
| uint8_t *pci_conf = d->dev.config; |
| qemu_irq *irq; |
| |
| pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_CMD); |
| pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_CMD_646); |
| |
| pci_conf[PCI_REVISION_ID] = 0x07; // IDE controller revision |
| pci_conf[PCI_CLASS_PROG] = 0x8f; |
| |
| pci_config_set_class(pci_conf, PCI_CLASS_STORAGE_IDE); |
| pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type |
| |
| pci_conf[0x51] = 0x04; // enable IDE0 |
| if (d->secondary) { |
| /* XXX: if not enabled, really disable the seconday IDE controller */ |
| pci_conf[0x51] |= 0x08; /* enable IDE1 */ |
| } |
| |
| pci_register_bar(dev, 0, 0x8, PCI_BASE_ADDRESS_SPACE_IO, ide_map); |
| pci_register_bar(dev, 1, 0x4, PCI_BASE_ADDRESS_SPACE_IO, ide_map); |
| pci_register_bar(dev, 2, 0x8, PCI_BASE_ADDRESS_SPACE_IO, ide_map); |
| pci_register_bar(dev, 3, 0x4, PCI_BASE_ADDRESS_SPACE_IO, ide_map); |
| pci_register_bar(dev, 4, 0x10, PCI_BASE_ADDRESS_SPACE_IO, bmdma_map); |
| |
| /* TODO: RST# value should be 0 */ |
| pci_conf[PCI_INTERRUPT_PIN] = 0x01; // interrupt on pin 1 |
| |
| irq = qemu_allocate_irqs(cmd646_set_irq, d, 2); |
| ide_bus_new(&d->bus[0], &d->dev.qdev); |
| ide_bus_new(&d->bus[1], &d->dev.qdev); |
| ide_init2(&d->bus[0], NULL, NULL, irq[0]); |
| ide_init2(&d->bus[1], NULL, NULL, irq[1]); |
| |
| vmstate_register(0, &vmstate_ide_pci, d); |
| qemu_register_reset(cmd646_reset, d); |
| return 0; |
| } |
| |
| void pci_cmd646_ide_init(PCIBus *bus, DriveInfo **hd_table, |
| int secondary_ide_enabled) |
| { |
| PCIDevice *dev; |
| |
| dev = pci_create(bus, -1, "cmd646-ide"); |
| qdev_prop_set_uint32(&dev->qdev, "secondary", secondary_ide_enabled); |
| qdev_init_nofail(&dev->qdev); |
| |
| pci_ide_create_devs(dev, hd_table); |
| } |
| |
| static PCIDeviceInfo cmd646_ide_info[] = { |
| { |
| .qdev.name = "cmd646-ide", |
| .qdev.size = sizeof(PCIIDEState), |
| .init = pci_cmd646_ide_initfn, |
| .qdev.props = (Property[]) { |
| DEFINE_PROP_UINT32("secondary", PCIIDEState, secondary, 0), |
| DEFINE_PROP_END_OF_LIST(), |
| }, |
| },{ |
| /* end of list */ |
| } |
| }; |
| |
| static void cmd646_ide_register(void) |
| { |
| pci_qdev_register_many(cmd646_ide_info); |
| } |
| device_init(cmd646_ide_register); |