| /* |
| * Arm PrimeCell PL110 Color LCD Controller |
| * |
| * Copyright (c) 2005-2006 CodeSourcery. |
| * Written by Paul Brook |
| * |
| * This code is licenced under the GNU LGPL |
| */ |
| |
| #include "vl.h" |
| |
| #define PL110_CR_EN 0x001 |
| #define PL110_CR_BGR 0x100 |
| #define PL110_CR_BEBO 0x200 |
| #define PL110_CR_BEPO 0x400 |
| #define PL110_CR_PWR 0x800 |
| |
| enum pl110_bppmode |
| { |
| BPP_1, |
| BPP_2, |
| BPP_4, |
| BPP_8, |
| BPP_16, |
| BPP_32 |
| }; |
| |
| typedef struct { |
| uint32_t base; |
| DisplayState *ds; |
| /* The Versatile/PB uses a slightly modified PL110 controller. */ |
| int versatile; |
| uint32_t timing[4]; |
| uint32_t cr; |
| uint32_t upbase; |
| uint32_t lpbase; |
| uint32_t int_status; |
| uint32_t int_mask; |
| int cols; |
| int rows; |
| enum pl110_bppmode bpp; |
| int invalidate; |
| uint32_t pallette[256]; |
| uint32_t raw_pallette[128]; |
| qemu_irq irq; |
| } pl110_state; |
| |
| static const unsigned char pl110_id[] = |
| { 0x10, 0x11, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 }; |
| |
| /* The Arm documentation (DDI0224C) says the CLDC on the Versatile board |
| has a different ID. However Linux only looks for the normal ID. */ |
| #if 0 |
| static const unsigned char pl110_versatile_id[] = |
| { 0x93, 0x10, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 }; |
| #else |
| #define pl110_versatile_id pl110_id |
| #endif |
| |
| static inline uint32_t rgb_to_pixel8(unsigned int r, unsigned int g, unsigned b) |
| { |
| return ((r >> 5) << 5) | ((g >> 5) << 2) | (b >> 6); |
| } |
| |
| static inline uint32_t rgb_to_pixel15(unsigned int r, unsigned int g, unsigned b) |
| { |
| return ((r >> 3) << 10) | ((g >> 3) << 5) | (b >> 3); |
| } |
| |
| static inline uint32_t rgb_to_pixel16(unsigned int r, unsigned int g, unsigned b) |
| { |
| return ((r >> 3) << 11) | ((g >> 2) << 5) | (b >> 3); |
| } |
| |
| static inline uint32_t rgb_to_pixel24(unsigned int r, unsigned int g, unsigned b) |
| { |
| return (r << 16) | (g << 8) | b; |
| } |
| |
| static inline uint32_t rgb_to_pixel32(unsigned int r, unsigned int g, unsigned b) |
| { |
| return (r << 16) | (g << 8) | b; |
| } |
| |
| typedef void (*drawfn)(uint32_t *, uint8_t *, const uint8_t *, int); |
| |
| #define BITS 8 |
| #include "pl110_template.h" |
| #define BITS 15 |
| #include "pl110_template.h" |
| #define BITS 16 |
| #include "pl110_template.h" |
| #define BITS 24 |
| #include "pl110_template.h" |
| #define BITS 32 |
| #include "pl110_template.h" |
| |
| static int pl110_enabled(pl110_state *s) |
| { |
| return (s->cr & PL110_CR_EN) && (s->cr & PL110_CR_PWR); |
| } |
| |
| static void pl110_update_display(void *opaque) |
| { |
| pl110_state *s = (pl110_state *)opaque; |
| drawfn* fntable; |
| drawfn fn; |
| uint32_t *pallette; |
| uint32_t addr; |
| uint32_t base; |
| int dest_width; |
| int src_width; |
| uint8_t *dest; |
| uint8_t *src; |
| int first, last = 0; |
| int dirty, new_dirty; |
| int i; |
| int bpp_offset; |
| |
| if (!pl110_enabled(s)) |
| return; |
| |
| switch (s->ds->depth) { |
| case 0: |
| return; |
| case 8: |
| fntable = pl110_draw_fn_8; |
| dest_width = 1; |
| break; |
| case 15: |
| fntable = pl110_draw_fn_15; |
| dest_width = 2; |
| break; |
| case 16: |
| fntable = pl110_draw_fn_16; |
| dest_width = 2; |
| break; |
| case 24: |
| fntable = pl110_draw_fn_24; |
| dest_width = 3; |
| break; |
| case 32: |
| fntable = pl110_draw_fn_32; |
| dest_width = 4; |
| break; |
| default: |
| fprintf(stderr, "pl110: Bad color depth\n"); |
| exit(1); |
| } |
| if (s->cr & PL110_CR_BGR) |
| bpp_offset = 0; |
| else |
| bpp_offset = 18; |
| |
| if (s->cr & PL110_CR_BEBO) |
| fn = fntable[s->bpp + 6 + bpp_offset]; |
| else if (s->cr & PL110_CR_BEPO) |
| fn = fntable[s->bpp + 12 + bpp_offset]; |
| else |
| fn = fntable[s->bpp + bpp_offset]; |
| |
| src_width = s->cols; |
| switch (s->bpp) { |
| case BPP_1: |
| src_width >>= 3; |
| break; |
| case BPP_2: |
| src_width >>= 2; |
| break; |
| case BPP_4: |
| src_width >>= 1; |
| break; |
| case BPP_8: |
| break; |
| case BPP_16: |
| src_width <<= 1; |
| break; |
| case BPP_32: |
| src_width <<= 2; |
| break; |
| } |
| dest_width *= s->cols; |
| pallette = s->pallette; |
| base = s->upbase; |
| /* HACK: Arm aliases physical memory at 0x80000000. */ |
| if (base > 0x80000000) |
| base -= 0x80000000; |
| src = phys_ram_base + base; |
| dest = s->ds->data; |
| first = -1; |
| addr = base; |
| |
| dirty = cpu_physical_memory_get_dirty(addr, VGA_DIRTY_FLAG); |
| new_dirty = dirty; |
| for (i = 0; i < s->rows; i++) { |
| if ((addr & ~TARGET_PAGE_MASK) + src_width >= TARGET_PAGE_SIZE) { |
| uint32_t tmp; |
| new_dirty = 0; |
| for (tmp = 0; tmp < src_width; tmp += TARGET_PAGE_SIZE) { |
| new_dirty |= cpu_physical_memory_get_dirty(addr + tmp, |
| VGA_DIRTY_FLAG); |
| } |
| } |
| |
| if (dirty || new_dirty || s->invalidate) { |
| fn(pallette, dest, src, s->cols); |
| if (first == -1) |
| first = i; |
| last = i; |
| } |
| dirty = new_dirty; |
| addr += src_width; |
| dest += dest_width; |
| src += src_width; |
| } |
| if (first < 0) |
| return; |
| |
| s->invalidate = 0; |
| cpu_physical_memory_reset_dirty(base + first * src_width, |
| base + (last + 1) * src_width, |
| VGA_DIRTY_FLAG); |
| dpy_update(s->ds, 0, first, s->cols, last - first + 1); |
| } |
| |
| static void pl110_invalidate_display(void * opaque) |
| { |
| pl110_state *s = (pl110_state *)opaque; |
| s->invalidate = 1; |
| } |
| |
| static void pl110_update_pallette(pl110_state *s, int n) |
| { |
| int i; |
| uint32_t raw; |
| unsigned int r, g, b; |
| |
| raw = s->raw_pallette[n]; |
| n <<= 1; |
| for (i = 0; i < 2; i++) { |
| r = (raw & 0x1f) << 3; |
| raw >>= 5; |
| g = (raw & 0x1f) << 3; |
| raw >>= 5; |
| b = (raw & 0x1f) << 3; |
| /* The I bit is ignored. */ |
| raw >>= 6; |
| switch (s->ds->depth) { |
| case 8: |
| s->pallette[n] = rgb_to_pixel8(r, g, b); |
| break; |
| case 15: |
| s->pallette[n] = rgb_to_pixel15(r, g, b); |
| break; |
| case 16: |
| s->pallette[n] = rgb_to_pixel16(r, g, b); |
| break; |
| case 24: |
| case 32: |
| s->pallette[n] = rgb_to_pixel32(r, g, b); |
| break; |
| } |
| n++; |
| } |
| } |
| |
| static void pl110_resize(pl110_state *s, int width, int height) |
| { |
| if (width != s->cols || height != s->rows) { |
| if (pl110_enabled(s)) { |
| dpy_resize(s->ds, width, height); |
| } |
| } |
| s->cols = width; |
| s->rows = height; |
| } |
| |
| /* Update interrupts. */ |
| static void pl110_update(pl110_state *s) |
| { |
| /* TODO: Implement interrupts. */ |
| } |
| |
| static uint32_t pl110_read(void *opaque, target_phys_addr_t offset) |
| { |
| pl110_state *s = (pl110_state *)opaque; |
| |
| offset -= s->base; |
| if (offset >= 0xfe0 && offset < 0x1000) { |
| if (s->versatile) |
| return pl110_versatile_id[(offset - 0xfe0) >> 2]; |
| else |
| return pl110_id[(offset - 0xfe0) >> 2]; |
| } |
| if (offset >= 0x200 && offset < 0x400) { |
| return s->raw_pallette[(offset - 0x200) >> 2]; |
| } |
| switch (offset >> 2) { |
| case 0: /* LCDTiming0 */ |
| return s->timing[0]; |
| case 1: /* LCDTiming1 */ |
| return s->timing[1]; |
| case 2: /* LCDTiming2 */ |
| return s->timing[2]; |
| case 3: /* LCDTiming3 */ |
| return s->timing[3]; |
| case 4: /* LCDUPBASE */ |
| return s->upbase; |
| case 5: /* LCDLPBASE */ |
| return s->lpbase; |
| case 6: /* LCDIMSC */ |
| if (s->versatile) |
| return s->cr; |
| return s->int_mask; |
| case 7: /* LCDControl */ |
| if (s->versatile) |
| return s->int_mask; |
| return s->cr; |
| case 8: /* LCDRIS */ |
| return s->int_status; |
| case 9: /* LCDMIS */ |
| return s->int_status & s->int_mask; |
| case 11: /* LCDUPCURR */ |
| /* TODO: Implement vertical refresh. */ |
| return s->upbase; |
| case 12: /* LCDLPCURR */ |
| return s->lpbase; |
| default: |
| cpu_abort (cpu_single_env, "pl110_read: Bad offset %x\n", (int)offset); |
| return 0; |
| } |
| } |
| |
| static void pl110_write(void *opaque, target_phys_addr_t offset, |
| uint32_t val) |
| { |
| pl110_state *s = (pl110_state *)opaque; |
| int n; |
| |
| /* For simplicity invalidate the display whenever a control register |
| is writen to. */ |
| s->invalidate = 1; |
| offset -= s->base; |
| if (offset >= 0x200 && offset < 0x400) { |
| /* Pallette. */ |
| n = (offset - 0x200) >> 2; |
| s->raw_pallette[(offset - 0x200) >> 2] = val; |
| pl110_update_pallette(s, n); |
| return; |
| } |
| switch (offset >> 2) { |
| case 0: /* LCDTiming0 */ |
| s->timing[0] = val; |
| n = ((val & 0xfc) + 4) * 4; |
| pl110_resize(s, n, s->rows); |
| break; |
| case 1: /* LCDTiming1 */ |
| s->timing[1] = val; |
| n = (val & 0x3ff) + 1; |
| pl110_resize(s, s->cols, n); |
| break; |
| case 2: /* LCDTiming2 */ |
| s->timing[2] = val; |
| break; |
| case 3: /* LCDTiming3 */ |
| s->timing[3] = val; |
| break; |
| case 4: /* LCDUPBASE */ |
| s->upbase = val; |
| break; |
| case 5: /* LCDLPBASE */ |
| s->lpbase = val; |
| break; |
| case 6: /* LCDIMSC */ |
| if (s->versatile) |
| goto control; |
| imsc: |
| s->int_mask = val; |
| pl110_update(s); |
| break; |
| case 7: /* LCDControl */ |
| if (s->versatile) |
| goto imsc; |
| control: |
| s->cr = val; |
| s->bpp = (val >> 1) & 7; |
| if (pl110_enabled(s)) { |
| dpy_resize(s->ds, s->cols, s->rows); |
| } |
| break; |
| case 10: /* LCDICR */ |
| s->int_status &= ~val; |
| pl110_update(s); |
| break; |
| default: |
| cpu_abort (cpu_single_env, "pl110_write: Bad offset %x\n", (int)offset); |
| } |
| } |
| |
| static CPUReadMemoryFunc *pl110_readfn[] = { |
| pl110_read, |
| pl110_read, |
| pl110_read |
| }; |
| |
| static CPUWriteMemoryFunc *pl110_writefn[] = { |
| pl110_write, |
| pl110_write, |
| pl110_write |
| }; |
| |
| void *pl110_init(DisplayState *ds, uint32_t base, qemu_irq irq, |
| int versatile) |
| { |
| pl110_state *s; |
| int iomemtype; |
| |
| s = (pl110_state *)qemu_mallocz(sizeof(pl110_state)); |
| iomemtype = cpu_register_io_memory(0, pl110_readfn, |
| pl110_writefn, s); |
| cpu_register_physical_memory(base, 0x00001000, iomemtype); |
| s->base = base; |
| s->ds = ds; |
| s->versatile = versatile; |
| s->irq = irq; |
| graphic_console_init(ds, pl110_update_display, pl110_invalidate_display, |
| NULL, s); |
| /* ??? Save/restore. */ |
| return s; |
| } |