| #ifndef CPU_COMMON_H |
| #define CPU_COMMON_H 1 |
| |
| /* CPU interfaces that are target indpendent. */ |
| |
| #ifdef TARGET_PHYS_ADDR_BITS |
| #include "targphys.h" |
| #endif |
| |
| #ifndef NEED_CPU_H |
| #include "poison.h" |
| #endif |
| |
| #include "bswap.h" |
| #include "qemu-queue.h" |
| |
| #if !defined(CONFIG_USER_ONLY) |
| |
| enum device_endian { |
| DEVICE_NATIVE_ENDIAN, |
| DEVICE_BIG_ENDIAN, |
| DEVICE_LITTLE_ENDIAN, |
| }; |
| |
| /* address in the RAM (different from a physical address) */ |
| #if defined(CONFIG_XEN_BACKEND) && TARGET_PHYS_ADDR_BITS == 64 |
| typedef uint64_t ram_addr_t; |
| # define RAM_ADDR_MAX UINT64_MAX |
| # define RAM_ADDR_FMT "%" PRIx64 |
| #else |
| typedef unsigned long ram_addr_t; |
| # define RAM_ADDR_MAX ULONG_MAX |
| # define RAM_ADDR_FMT "%lx" |
| #endif |
| |
| /* memory API */ |
| |
| typedef void CPUWriteMemoryFunc(void *opaque, target_phys_addr_t addr, uint32_t value); |
| typedef uint32_t CPUReadMemoryFunc(void *opaque, target_phys_addr_t addr); |
| |
| void cpu_register_physical_memory_log(target_phys_addr_t start_addr, |
| ram_addr_t size, |
| ram_addr_t phys_offset, |
| ram_addr_t region_offset, |
| bool log_dirty); |
| |
| static inline void cpu_register_physical_memory_offset(target_phys_addr_t start_addr, |
| ram_addr_t size, |
| ram_addr_t phys_offset, |
| ram_addr_t region_offset) |
| { |
| cpu_register_physical_memory_log(start_addr, size, phys_offset, |
| region_offset, false); |
| } |
| |
| static inline void cpu_register_physical_memory(target_phys_addr_t start_addr, |
| ram_addr_t size, |
| ram_addr_t phys_offset) |
| { |
| cpu_register_physical_memory_offset(start_addr, size, phys_offset, 0); |
| } |
| |
| ram_addr_t cpu_get_physical_page_desc(target_phys_addr_t addr); |
| ram_addr_t qemu_ram_alloc_from_ptr(DeviceState *dev, const char *name, |
| ram_addr_t size, void *host); |
| ram_addr_t qemu_ram_alloc(DeviceState *dev, const char *name, ram_addr_t size); |
| void qemu_ram_free(ram_addr_t addr); |
| void qemu_ram_free_from_ptr(ram_addr_t addr); |
| void qemu_ram_remap(ram_addr_t addr, ram_addr_t length); |
| /* This should only be used for ram local to a device. */ |
| void *qemu_get_ram_ptr(ram_addr_t addr); |
| void *qemu_ram_ptr_length(ram_addr_t addr, ram_addr_t *size); |
| /* Same but slower, to use for migration, where the order of |
| * RAMBlocks must not change. */ |
| void *qemu_safe_ram_ptr(ram_addr_t addr); |
| void qemu_put_ram_ptr(void *addr); |
| /* This should not be used by devices. */ |
| int qemu_ram_addr_from_host(void *ptr, ram_addr_t *ram_addr); |
| ram_addr_t qemu_ram_addr_from_host_nofail(void *ptr); |
| |
| int cpu_register_io_memory(CPUReadMemoryFunc * const *mem_read, |
| CPUWriteMemoryFunc * const *mem_write, |
| void *opaque, enum device_endian endian); |
| void cpu_unregister_io_memory(int table_address); |
| |
| void cpu_physical_memory_rw(target_phys_addr_t addr, uint8_t *buf, |
| int len, int is_write); |
| static inline void cpu_physical_memory_read(target_phys_addr_t addr, |
| void *buf, int len) |
| { |
| cpu_physical_memory_rw(addr, buf, len, 0); |
| } |
| static inline void cpu_physical_memory_write(target_phys_addr_t addr, |
| const void *buf, int len) |
| { |
| cpu_physical_memory_rw(addr, (void *)buf, len, 1); |
| } |
| void *cpu_physical_memory_map(target_phys_addr_t addr, |
| target_phys_addr_t *plen, |
| int is_write); |
| void cpu_physical_memory_unmap(void *buffer, target_phys_addr_t len, |
| int is_write, target_phys_addr_t access_len); |
| void *cpu_register_map_client(void *opaque, void (*callback)(void *opaque)); |
| void cpu_unregister_map_client(void *cookie); |
| |
| struct CPUPhysMemoryClient; |
| typedef struct CPUPhysMemoryClient CPUPhysMemoryClient; |
| struct CPUPhysMemoryClient { |
| void (*set_memory)(struct CPUPhysMemoryClient *client, |
| target_phys_addr_t start_addr, |
| ram_addr_t size, |
| ram_addr_t phys_offset, |
| bool log_dirty); |
| int (*sync_dirty_bitmap)(struct CPUPhysMemoryClient *client, |
| target_phys_addr_t start_addr, |
| target_phys_addr_t end_addr); |
| int (*migration_log)(struct CPUPhysMemoryClient *client, |
| int enable); |
| int (*log_start)(struct CPUPhysMemoryClient *client, |
| target_phys_addr_t phys_addr, ram_addr_t size); |
| int (*log_stop)(struct CPUPhysMemoryClient *client, |
| target_phys_addr_t phys_addr, ram_addr_t size); |
| QLIST_ENTRY(CPUPhysMemoryClient) list; |
| }; |
| |
| void cpu_register_phys_memory_client(CPUPhysMemoryClient *); |
| void cpu_unregister_phys_memory_client(CPUPhysMemoryClient *); |
| |
| /* Coalesced MMIO regions are areas where write operations can be reordered. |
| * This usually implies that write operations are side-effect free. This allows |
| * batching which can make a major impact on performance when using |
| * virtualization. |
| */ |
| void qemu_register_coalesced_mmio(target_phys_addr_t addr, ram_addr_t size); |
| |
| void qemu_unregister_coalesced_mmio(target_phys_addr_t addr, ram_addr_t size); |
| |
| void qemu_flush_coalesced_mmio_buffer(void); |
| |
| uint32_t ldub_phys(target_phys_addr_t addr); |
| uint32_t lduw_le_phys(target_phys_addr_t addr); |
| uint32_t lduw_be_phys(target_phys_addr_t addr); |
| uint32_t ldl_le_phys(target_phys_addr_t addr); |
| uint32_t ldl_be_phys(target_phys_addr_t addr); |
| uint64_t ldq_le_phys(target_phys_addr_t addr); |
| uint64_t ldq_be_phys(target_phys_addr_t addr); |
| void stb_phys(target_phys_addr_t addr, uint32_t val); |
| void stw_le_phys(target_phys_addr_t addr, uint32_t val); |
| void stw_be_phys(target_phys_addr_t addr, uint32_t val); |
| void stl_le_phys(target_phys_addr_t addr, uint32_t val); |
| void stl_be_phys(target_phys_addr_t addr, uint32_t val); |
| void stq_le_phys(target_phys_addr_t addr, uint64_t val); |
| void stq_be_phys(target_phys_addr_t addr, uint64_t val); |
| |
| #ifdef NEED_CPU_H |
| uint32_t lduw_phys(target_phys_addr_t addr); |
| uint32_t ldl_phys(target_phys_addr_t addr); |
| uint64_t ldq_phys(target_phys_addr_t addr); |
| void stl_phys_notdirty(target_phys_addr_t addr, uint32_t val); |
| void stq_phys_notdirty(target_phys_addr_t addr, uint64_t val); |
| void stw_phys(target_phys_addr_t addr, uint32_t val); |
| void stl_phys(target_phys_addr_t addr, uint32_t val); |
| void stq_phys(target_phys_addr_t addr, uint64_t val); |
| #endif |
| |
| void cpu_physical_memory_write_rom(target_phys_addr_t addr, |
| const uint8_t *buf, int len); |
| |
| #define IO_MEM_SHIFT 3 |
| |
| #define IO_MEM_RAM (0 << IO_MEM_SHIFT) /* hardcoded offset */ |
| #define IO_MEM_ROM (1 << IO_MEM_SHIFT) /* hardcoded offset */ |
| #define IO_MEM_UNASSIGNED (2 << IO_MEM_SHIFT) |
| #define IO_MEM_NOTDIRTY (3 << IO_MEM_SHIFT) |
| |
| /* Acts like a ROM when read and like a device when written. */ |
| #define IO_MEM_ROMD (1) |
| #define IO_MEM_SUBPAGE (2) |
| |
| #endif |
| |
| #endif /* !CPU_COMMON_H */ |