| /* |
| * ACPI implementation |
| * |
| * Copyright (c) 2006 Fabrice Bellard |
| * |
| * This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU Lesser General Public |
| * License version 2 as published by the Free Software Foundation. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * Lesser General Public License for more details. |
| * |
| * You should have received a copy of the GNU Lesser General Public |
| * License along with this library; if not, see <http://www.gnu.org/licenses/> |
| */ |
| #include "hw.h" |
| #include "pc.h" |
| #include "pci.h" |
| #include "qemu-timer.h" |
| #include "sysemu.h" |
| #include "i2c.h" |
| #include "smbus.h" |
| #include "kvm.h" |
| |
| //#define DEBUG |
| |
| /* i82731AB (PIIX4) compatible power management function */ |
| #define PM_FREQ 3579545 |
| |
| #define ACPI_DBG_IO_ADDR 0xb044 |
| |
| typedef struct PIIX4PMState { |
| PCIDevice dev; |
| uint16_t pmsts; |
| uint16_t pmen; |
| uint16_t pmcntrl; |
| uint8_t apmc; |
| uint8_t apms; |
| QEMUTimer *tmr_timer; |
| int64_t tmr_overflow_time; |
| i2c_bus *smbus; |
| uint8_t smb_stat; |
| uint8_t smb_ctl; |
| uint8_t smb_cmd; |
| uint8_t smb_addr; |
| uint8_t smb_data0; |
| uint8_t smb_data1; |
| uint8_t smb_data[32]; |
| uint8_t smb_index; |
| qemu_irq irq; |
| } PIIX4PMState; |
| |
| #define RSM_STS (1 << 15) |
| #define PWRBTN_STS (1 << 8) |
| #define RTC_EN (1 << 10) |
| #define PWRBTN_EN (1 << 8) |
| #define GBL_EN (1 << 5) |
| #define TMROF_EN (1 << 0) |
| |
| #define SCI_EN (1 << 0) |
| |
| #define SUS_EN (1 << 13) |
| |
| #define ACPI_ENABLE 0xf1 |
| #define ACPI_DISABLE 0xf0 |
| |
| #define SMBHSTSTS 0x00 |
| #define SMBHSTCNT 0x02 |
| #define SMBHSTCMD 0x03 |
| #define SMBHSTADD 0x04 |
| #define SMBHSTDAT0 0x05 |
| #define SMBHSTDAT1 0x06 |
| #define SMBBLKDAT 0x07 |
| |
| static PIIX4PMState *pm_state; |
| |
| static uint32_t get_pmtmr(PIIX4PMState *s) |
| { |
| uint32_t d; |
| d = muldiv64(qemu_get_clock(vm_clock), PM_FREQ, get_ticks_per_sec()); |
| return d & 0xffffff; |
| } |
| |
| static int get_pmsts(PIIX4PMState *s) |
| { |
| int64_t d; |
| int pmsts; |
| pmsts = s->pmsts; |
| d = muldiv64(qemu_get_clock(vm_clock), PM_FREQ, get_ticks_per_sec()); |
| if (d >= s->tmr_overflow_time) |
| s->pmsts |= TMROF_EN; |
| return s->pmsts; |
| } |
| |
| static void pm_update_sci(PIIX4PMState *s) |
| { |
| int sci_level, pmsts; |
| int64_t expire_time; |
| |
| pmsts = get_pmsts(s); |
| sci_level = (((pmsts & s->pmen) & |
| (RTC_EN | PWRBTN_EN | GBL_EN | TMROF_EN)) != 0); |
| qemu_set_irq(s->irq, sci_level); |
| /* schedule a timer interruption if needed */ |
| if ((s->pmen & TMROF_EN) && !(pmsts & TMROF_EN)) { |
| expire_time = muldiv64(s->tmr_overflow_time, get_ticks_per_sec(), PM_FREQ); |
| qemu_mod_timer(s->tmr_timer, expire_time); |
| } else { |
| qemu_del_timer(s->tmr_timer); |
| } |
| } |
| |
| static void pm_tmr_timer(void *opaque) |
| { |
| PIIX4PMState *s = opaque; |
| pm_update_sci(s); |
| } |
| |
| static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val) |
| { |
| PIIX4PMState *s = opaque; |
| addr &= 0x3f; |
| switch(addr) { |
| case 0x00: |
| { |
| int64_t d; |
| int pmsts; |
| pmsts = get_pmsts(s); |
| if (pmsts & val & TMROF_EN) { |
| /* if TMRSTS is reset, then compute the new overflow time */ |
| d = muldiv64(qemu_get_clock(vm_clock), PM_FREQ, |
| get_ticks_per_sec()); |
| s->tmr_overflow_time = (d + 0x800000LL) & ~0x7fffffLL; |
| } |
| s->pmsts &= ~val; |
| pm_update_sci(s); |
| } |
| break; |
| case 0x02: |
| s->pmen = val; |
| pm_update_sci(s); |
| break; |
| case 0x04: |
| { |
| int sus_typ; |
| s->pmcntrl = val & ~(SUS_EN); |
| if (val & SUS_EN) { |
| /* change suspend type */ |
| sus_typ = (val >> 10) & 7; |
| switch(sus_typ) { |
| case 0: /* soft power off */ |
| qemu_system_shutdown_request(); |
| break; |
| case 1: |
| /* RSM_STS should be set on resume. Pretend that resume |
| was caused by power button */ |
| s->pmsts |= (RSM_STS | PWRBTN_STS); |
| qemu_system_reset_request(); |
| #if defined(TARGET_I386) |
| cmos_set_s3_resume(); |
| #endif |
| default: |
| break; |
| } |
| } |
| } |
| break; |
| default: |
| break; |
| } |
| #ifdef DEBUG |
| printf("PM writew port=0x%04x val=0x%04x\n", addr, val); |
| #endif |
| } |
| |
| static uint32_t pm_ioport_readw(void *opaque, uint32_t addr) |
| { |
| PIIX4PMState *s = opaque; |
| uint32_t val; |
| |
| addr &= 0x3f; |
| switch(addr) { |
| case 0x00: |
| val = get_pmsts(s); |
| break; |
| case 0x02: |
| val = s->pmen; |
| break; |
| case 0x04: |
| val = s->pmcntrl; |
| break; |
| default: |
| val = 0; |
| break; |
| } |
| #ifdef DEBUG |
| printf("PM readw port=0x%04x val=0x%04x\n", addr, val); |
| #endif |
| return val; |
| } |
| |
| static void pm_ioport_writel(void *opaque, uint32_t addr, uint32_t val) |
| { |
| // PIIX4PMState *s = opaque; |
| addr &= 0x3f; |
| #ifdef DEBUG |
| printf("PM writel port=0x%04x val=0x%08x\n", addr, val); |
| #endif |
| } |
| |
| static uint32_t pm_ioport_readl(void *opaque, uint32_t addr) |
| { |
| PIIX4PMState *s = opaque; |
| uint32_t val; |
| |
| addr &= 0x3f; |
| switch(addr) { |
| case 0x08: |
| val = get_pmtmr(s); |
| break; |
| default: |
| val = 0; |
| break; |
| } |
| #ifdef DEBUG |
| printf("PM readl port=0x%04x val=0x%08x\n", addr, val); |
| #endif |
| return val; |
| } |
| |
| static void pm_smi_writeb(void *opaque, uint32_t addr, uint32_t val) |
| { |
| PIIX4PMState *s = opaque; |
| addr &= 1; |
| #ifdef DEBUG |
| printf("pm_smi_writeb addr=0x%x val=0x%02x\n", addr, val); |
| #endif |
| if (addr == 0) { |
| s->apmc = val; |
| |
| /* ACPI specs 3.0, 4.7.2.5 */ |
| if (val == ACPI_ENABLE) { |
| s->pmcntrl |= SCI_EN; |
| } else if (val == ACPI_DISABLE) { |
| s->pmcntrl &= ~SCI_EN; |
| } |
| |
| if (s->dev.config[0x5b] & (1 << 1)) { |
| cpu_interrupt(first_cpu, CPU_INTERRUPT_SMI); |
| } |
| } else { |
| s->apms = val; |
| } |
| } |
| |
| static uint32_t pm_smi_readb(void *opaque, uint32_t addr) |
| { |
| PIIX4PMState *s = opaque; |
| uint32_t val; |
| |
| addr &= 1; |
| if (addr == 0) { |
| val = s->apmc; |
| } else { |
| val = s->apms; |
| } |
| #ifdef DEBUG |
| printf("pm_smi_readb addr=0x%x val=0x%02x\n", addr, val); |
| #endif |
| return val; |
| } |
| |
| static void acpi_dbg_writel(void *opaque, uint32_t addr, uint32_t val) |
| { |
| #if defined(DEBUG) |
| printf("ACPI: DBG: 0x%08x\n", val); |
| #endif |
| } |
| |
| static void smb_transaction(PIIX4PMState *s) |
| { |
| uint8_t prot = (s->smb_ctl >> 2) & 0x07; |
| uint8_t read = s->smb_addr & 0x01; |
| uint8_t cmd = s->smb_cmd; |
| uint8_t addr = s->smb_addr >> 1; |
| i2c_bus *bus = s->smbus; |
| |
| #ifdef DEBUG |
| printf("SMBus trans addr=0x%02x prot=0x%02x\n", addr, prot); |
| #endif |
| switch(prot) { |
| case 0x0: |
| smbus_quick_command(bus, addr, read); |
| break; |
| case 0x1: |
| if (read) { |
| s->smb_data0 = smbus_receive_byte(bus, addr); |
| } else { |
| smbus_send_byte(bus, addr, cmd); |
| } |
| break; |
| case 0x2: |
| if (read) { |
| s->smb_data0 = smbus_read_byte(bus, addr, cmd); |
| } else { |
| smbus_write_byte(bus, addr, cmd, s->smb_data0); |
| } |
| break; |
| case 0x3: |
| if (read) { |
| uint16_t val; |
| val = smbus_read_word(bus, addr, cmd); |
| s->smb_data0 = val; |
| s->smb_data1 = val >> 8; |
| } else { |
| smbus_write_word(bus, addr, cmd, (s->smb_data1 << 8) | s->smb_data0); |
| } |
| break; |
| case 0x5: |
| if (read) { |
| s->smb_data0 = smbus_read_block(bus, addr, cmd, s->smb_data); |
| } else { |
| smbus_write_block(bus, addr, cmd, s->smb_data, s->smb_data0); |
| } |
| break; |
| default: |
| goto error; |
| } |
| return; |
| |
| error: |
| s->smb_stat |= 0x04; |
| } |
| |
| static void smb_ioport_writeb(void *opaque, uint32_t addr, uint32_t val) |
| { |
| PIIX4PMState *s = opaque; |
| addr &= 0x3f; |
| #ifdef DEBUG |
| printf("SMB writeb port=0x%04x val=0x%02x\n", addr, val); |
| #endif |
| switch(addr) { |
| case SMBHSTSTS: |
| s->smb_stat = 0; |
| s->smb_index = 0; |
| break; |
| case SMBHSTCNT: |
| s->smb_ctl = val; |
| if (val & 0x40) |
| smb_transaction(s); |
| break; |
| case SMBHSTCMD: |
| s->smb_cmd = val; |
| break; |
| case SMBHSTADD: |
| s->smb_addr = val; |
| break; |
| case SMBHSTDAT0: |
| s->smb_data0 = val; |
| break; |
| case SMBHSTDAT1: |
| s->smb_data1 = val; |
| break; |
| case SMBBLKDAT: |
| s->smb_data[s->smb_index++] = val; |
| if (s->smb_index > 31) |
| s->smb_index = 0; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static uint32_t smb_ioport_readb(void *opaque, uint32_t addr) |
| { |
| PIIX4PMState *s = opaque; |
| uint32_t val; |
| |
| addr &= 0x3f; |
| switch(addr) { |
| case SMBHSTSTS: |
| val = s->smb_stat; |
| break; |
| case SMBHSTCNT: |
| s->smb_index = 0; |
| val = s->smb_ctl & 0x1f; |
| break; |
| case SMBHSTCMD: |
| val = s->smb_cmd; |
| break; |
| case SMBHSTADD: |
| val = s->smb_addr; |
| break; |
| case SMBHSTDAT0: |
| val = s->smb_data0; |
| break; |
| case SMBHSTDAT1: |
| val = s->smb_data1; |
| break; |
| case SMBBLKDAT: |
| val = s->smb_data[s->smb_index++]; |
| if (s->smb_index > 31) |
| s->smb_index = 0; |
| break; |
| default: |
| val = 0; |
| break; |
| } |
| #ifdef DEBUG |
| printf("SMB readb port=0x%04x val=0x%02x\n", addr, val); |
| #endif |
| return val; |
| } |
| |
| static void pm_io_space_update(PIIX4PMState *s) |
| { |
| uint32_t pm_io_base; |
| |
| if (s->dev.config[0x80] & 1) { |
| pm_io_base = le32_to_cpu(*(uint32_t *)(s->dev.config + 0x40)); |
| pm_io_base &= 0xffc0; |
| |
| /* XXX: need to improve memory and ioport allocation */ |
| #if defined(DEBUG) |
| printf("PM: mapping to 0x%x\n", pm_io_base); |
| #endif |
| register_ioport_write(pm_io_base, 64, 2, pm_ioport_writew, s); |
| register_ioport_read(pm_io_base, 64, 2, pm_ioport_readw, s); |
| register_ioport_write(pm_io_base, 64, 4, pm_ioport_writel, s); |
| register_ioport_read(pm_io_base, 64, 4, pm_ioport_readl, s); |
| } |
| } |
| |
| static void pm_write_config(PCIDevice *d, |
| uint32_t address, uint32_t val, int len) |
| { |
| pci_default_write_config(d, address, val, len); |
| if (address == 0x80) |
| pm_io_space_update((PIIX4PMState *)d); |
| } |
| |
| static int vmstate_acpi_post_load(void *opaque, int version_id) |
| { |
| PIIX4PMState *s = opaque; |
| |
| pm_io_space_update(s); |
| return 0; |
| } |
| |
| static const VMStateDescription vmstate_acpi = { |
| .name = "piix4_pm", |
| .version_id = 1, |
| .minimum_version_id = 1, |
| .minimum_version_id_old = 1, |
| .post_load = vmstate_acpi_post_load, |
| .fields = (VMStateField []) { |
| VMSTATE_PCI_DEVICE(dev, PIIX4PMState), |
| VMSTATE_UINT16(pmsts, PIIX4PMState), |
| VMSTATE_UINT16(pmen, PIIX4PMState), |
| VMSTATE_UINT16(pmcntrl, PIIX4PMState), |
| VMSTATE_UINT8(apmc, PIIX4PMState), |
| VMSTATE_UINT8(apms, PIIX4PMState), |
| VMSTATE_TIMER(tmr_timer, PIIX4PMState), |
| VMSTATE_INT64(tmr_overflow_time, PIIX4PMState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void piix4_reset(void *opaque) |
| { |
| PIIX4PMState *s = opaque; |
| uint8_t *pci_conf = s->dev.config; |
| |
| pci_conf[0x58] = 0; |
| pci_conf[0x59] = 0; |
| pci_conf[0x5a] = 0; |
| pci_conf[0x5b] = 0; |
| |
| if (kvm_enabled()) { |
| /* Mark SMM as already inited (until KVM supports SMM). */ |
| pci_conf[0x5B] = 0x02; |
| } |
| } |
| |
| static void piix4_powerdown(void *opaque, int irq, int power_failing) |
| { |
| #if defined(TARGET_I386) |
| PIIX4PMState *s = opaque; |
| |
| if (!s) { |
| qemu_system_shutdown_request(); |
| } else if (s->pmen & PWRBTN_EN) { |
| s->pmsts |= PWRBTN_EN; |
| pm_update_sci(s); |
| } |
| #endif |
| } |
| |
| i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base, |
| qemu_irq sci_irq) |
| { |
| PIIX4PMState *s; |
| uint8_t *pci_conf; |
| |
| s = (PIIX4PMState *)pci_register_device(bus, |
| "PM", sizeof(PIIX4PMState), |
| devfn, NULL, pm_write_config); |
| pm_state = s; |
| pci_conf = s->dev.config; |
| pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL); |
| pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82371AB_3); |
| pci_conf[0x06] = 0x80; |
| pci_conf[0x07] = 0x02; |
| pci_conf[0x08] = 0x03; // revision number |
| pci_conf[0x09] = 0x00; |
| pci_config_set_class(pci_conf, PCI_CLASS_BRIDGE_OTHER); |
| pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type |
| pci_conf[0x3d] = 0x01; // interrupt pin 1 |
| |
| pci_conf[0x40] = 0x01; /* PM io base read only bit */ |
| |
| register_ioport_write(0xb2, 2, 1, pm_smi_writeb, s); |
| register_ioport_read(0xb2, 2, 1, pm_smi_readb, s); |
| |
| register_ioport_write(ACPI_DBG_IO_ADDR, 4, 4, acpi_dbg_writel, s); |
| |
| if (kvm_enabled()) { |
| /* Mark SMM as already inited to prevent SMM from running. KVM does not |
| * support SMM mode. */ |
| pci_conf[0x5B] = 0x02; |
| } |
| |
| /* XXX: which specification is used ? The i82731AB has different |
| mappings */ |
| pci_conf[0x5f] = (parallel_hds[0] != NULL ? 0x80 : 0) | 0x10; |
| pci_conf[0x63] = 0x60; |
| pci_conf[0x67] = (serial_hds[0] != NULL ? 0x08 : 0) | |
| (serial_hds[1] != NULL ? 0x90 : 0); |
| |
| pci_conf[0x90] = smb_io_base | 1; |
| pci_conf[0x91] = smb_io_base >> 8; |
| pci_conf[0xd2] = 0x09; |
| register_ioport_write(smb_io_base, 64, 1, smb_ioport_writeb, s); |
| register_ioport_read(smb_io_base, 64, 1, smb_ioport_readb, s); |
| |
| s->tmr_timer = qemu_new_timer(vm_clock, pm_tmr_timer, s); |
| |
| qemu_system_powerdown = *qemu_allocate_irqs(piix4_powerdown, s, 1); |
| |
| vmstate_register(0, &vmstate_acpi, s); |
| |
| s->smbus = i2c_init_bus(NULL, "i2c"); |
| s->irq = sci_irq; |
| qemu_register_reset(piix4_reset, s); |
| |
| return s->smbus; |
| } |
| |
| #define GPE_BASE 0xafe0 |
| #define PCI_BASE 0xae00 |
| #define PCI_EJ_BASE 0xae08 |
| |
| struct gpe_regs { |
| uint16_t sts; /* status */ |
| uint16_t en; /* enabled */ |
| }; |
| |
| struct pci_status { |
| uint32_t up; |
| uint32_t down; |
| }; |
| |
| static struct gpe_regs gpe; |
| static struct pci_status pci0_status; |
| |
| static uint32_t gpe_read_val(uint16_t val, uint32_t addr) |
| { |
| if (addr & 1) |
| return (val >> 8) & 0xff; |
| return val & 0xff; |
| } |
| |
| static uint32_t gpe_readb(void *opaque, uint32_t addr) |
| { |
| uint32_t val = 0; |
| struct gpe_regs *g = opaque; |
| switch (addr) { |
| case GPE_BASE: |
| case GPE_BASE + 1: |
| val = gpe_read_val(g->sts, addr); |
| break; |
| case GPE_BASE + 2: |
| case GPE_BASE + 3: |
| val = gpe_read_val(g->en, addr); |
| break; |
| default: |
| break; |
| } |
| |
| #if defined(DEBUG) |
| printf("gpe read %x == %x\n", addr, val); |
| #endif |
| return val; |
| } |
| |
| static void gpe_write_val(uint16_t *cur, int addr, uint32_t val) |
| { |
| if (addr & 1) |
| *cur = (*cur & 0xff) | (val << 8); |
| else |
| *cur = (*cur & 0xff00) | (val & 0xff); |
| } |
| |
| static void gpe_reset_val(uint16_t *cur, int addr, uint32_t val) |
| { |
| uint16_t x1, x0 = val & 0xff; |
| int shift = (addr & 1) ? 8 : 0; |
| |
| x1 = (*cur >> shift) & 0xff; |
| |
| x1 = x1 & ~x0; |
| |
| *cur = (*cur & (0xff << (8 - shift))) | (x1 << shift); |
| } |
| |
| static void gpe_writeb(void *opaque, uint32_t addr, uint32_t val) |
| { |
| struct gpe_regs *g = opaque; |
| switch (addr) { |
| case GPE_BASE: |
| case GPE_BASE + 1: |
| gpe_reset_val(&g->sts, addr, val); |
| break; |
| case GPE_BASE + 2: |
| case GPE_BASE + 3: |
| gpe_write_val(&g->en, addr, val); |
| break; |
| default: |
| break; |
| } |
| |
| #if defined(DEBUG) |
| printf("gpe write %x <== %d\n", addr, val); |
| #endif |
| } |
| |
| static uint32_t pcihotplug_read(void *opaque, uint32_t addr) |
| { |
| uint32_t val = 0; |
| struct pci_status *g = opaque; |
| switch (addr) { |
| case PCI_BASE: |
| val = g->up; |
| break; |
| case PCI_BASE + 4: |
| val = g->down; |
| break; |
| default: |
| break; |
| } |
| |
| #if defined(DEBUG) |
| printf("pcihotplug read %x == %x\n", addr, val); |
| #endif |
| return val; |
| } |
| |
| static void pcihotplug_write(void *opaque, uint32_t addr, uint32_t val) |
| { |
| struct pci_status *g = opaque; |
| switch (addr) { |
| case PCI_BASE: |
| g->up = val; |
| break; |
| case PCI_BASE + 4: |
| g->down = val; |
| break; |
| } |
| |
| #if defined(DEBUG) |
| printf("pcihotplug write %x <== %d\n", addr, val); |
| #endif |
| } |
| |
| static uint32_t pciej_read(void *opaque, uint32_t addr) |
| { |
| #if defined(DEBUG) |
| printf("pciej read %x\n", addr); |
| #endif |
| return 0; |
| } |
| |
| static void pciej_write(void *opaque, uint32_t addr, uint32_t val) |
| { |
| BusState *bus = opaque; |
| DeviceState *qdev; |
| PCIDevice *dev; |
| int slot = ffs(val) - 1; |
| |
| QLIST_FOREACH(qdev, &bus->children, sibling) { |
| dev = DO_UPCAST(PCIDevice, qdev, qdev); |
| if (PCI_SLOT(dev->devfn) == slot) { |
| #if defined (TARGET_I386) |
| pci_device_hot_remove_success(dev); |
| #endif |
| qdev_free(qdev); |
| } |
| } |
| |
| |
| #if defined(DEBUG) |
| printf("pciej write %x <== %d\n", addr, val); |
| #endif |
| } |
| |
| static int piix4_device_hotplug(PCIDevice *dev, int state); |
| |
| void piix4_acpi_system_hot_add_init(PCIBus *bus) |
| { |
| register_ioport_write(GPE_BASE, 4, 1, gpe_writeb, &gpe); |
| register_ioport_read(GPE_BASE, 4, 1, gpe_readb, &gpe); |
| |
| register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, &pci0_status); |
| register_ioport_read(PCI_BASE, 8, 4, pcihotplug_read, &pci0_status); |
| |
| register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, bus); |
| register_ioport_read(PCI_EJ_BASE, 4, 4, pciej_read, bus); |
| |
| pci_bus_hotplug(bus, piix4_device_hotplug); |
| } |
| |
| static void enable_device(struct pci_status *p, struct gpe_regs *g, int slot) |
| { |
| g->sts |= 2; |
| p->up |= (1 << slot); |
| } |
| |
| static void disable_device(struct pci_status *p, struct gpe_regs *g, int slot) |
| { |
| g->sts |= 2; |
| p->down |= (1 << slot); |
| } |
| |
| static int piix4_device_hotplug(PCIDevice *dev, int state) |
| { |
| int slot = PCI_SLOT(dev->devfn); |
| |
| pci0_status.up = 0; |
| pci0_status.down = 0; |
| if (state) |
| enable_device(&pci0_status, &gpe, slot); |
| else |
| disable_device(&pci0_status, &gpe, slot); |
| if (gpe.en & 2) { |
| qemu_set_irq(pm_state->irq, 1); |
| qemu_set_irq(pm_state->irq, 0); |
| } |
| return 0; |
| } |
| |
| struct acpi_table_header |
| { |
| char signature [4]; /* ACPI signature (4 ASCII characters) */ |
| uint32_t length; /* Length of table, in bytes, including header */ |
| uint8_t revision; /* ACPI Specification minor version # */ |
| uint8_t checksum; /* To make sum of entire table == 0 */ |
| char oem_id [6]; /* OEM identification */ |
| char oem_table_id [8]; /* OEM table identification */ |
| uint32_t oem_revision; /* OEM revision number */ |
| char asl_compiler_id [4]; /* ASL compiler vendor ID */ |
| uint32_t asl_compiler_revision; /* ASL compiler revision number */ |
| } __attribute__((packed)); |
| |
| char *acpi_tables; |
| size_t acpi_tables_len; |
| |
| static int acpi_checksum(const uint8_t *data, int len) |
| { |
| int sum, i; |
| sum = 0; |
| for(i = 0; i < len; i++) |
| sum += data[i]; |
| return (-sum) & 0xff; |
| } |
| |
| int acpi_table_add(const char *t) |
| { |
| static const char *dfl_id = "QEMUQEMU"; |
| char buf[1024], *p, *f; |
| struct acpi_table_header acpi_hdr; |
| unsigned long val; |
| size_t off; |
| |
| memset(&acpi_hdr, 0, sizeof(acpi_hdr)); |
| |
| if (get_param_value(buf, sizeof(buf), "sig", t)) { |
| strncpy(acpi_hdr.signature, buf, 4); |
| } else { |
| strncpy(acpi_hdr.signature, dfl_id, 4); |
| } |
| if (get_param_value(buf, sizeof(buf), "rev", t)) { |
| val = strtoul(buf, &p, 10); |
| if (val > 255 || *p != '\0') |
| goto out; |
| } else { |
| val = 1; |
| } |
| acpi_hdr.revision = (int8_t)val; |
| |
| if (get_param_value(buf, sizeof(buf), "oem_id", t)) { |
| strncpy(acpi_hdr.oem_id, buf, 6); |
| } else { |
| strncpy(acpi_hdr.oem_id, dfl_id, 6); |
| } |
| |
| if (get_param_value(buf, sizeof(buf), "oem_table_id", t)) { |
| strncpy(acpi_hdr.oem_table_id, buf, 8); |
| } else { |
| strncpy(acpi_hdr.oem_table_id, dfl_id, 8); |
| } |
| |
| if (get_param_value(buf, sizeof(buf), "oem_rev", t)) { |
| val = strtol(buf, &p, 10); |
| if(*p != '\0') |
| goto out; |
| } else { |
| val = 1; |
| } |
| acpi_hdr.oem_revision = cpu_to_le32(val); |
| |
| if (get_param_value(buf, sizeof(buf), "asl_compiler_id", t)) { |
| strncpy(acpi_hdr.asl_compiler_id, buf, 4); |
| } else { |
| strncpy(acpi_hdr.asl_compiler_id, dfl_id, 4); |
| } |
| |
| if (get_param_value(buf, sizeof(buf), "asl_compiler_rev", t)) { |
| val = strtol(buf, &p, 10); |
| if(*p != '\0') |
| goto out; |
| } else { |
| val = 1; |
| } |
| acpi_hdr.asl_compiler_revision = cpu_to_le32(val); |
| |
| if (!get_param_value(buf, sizeof(buf), "data", t)) { |
| buf[0] = '\0'; |
| } |
| |
| acpi_hdr.length = sizeof(acpi_hdr); |
| |
| f = buf; |
| while (buf[0]) { |
| struct stat s; |
| char *n = strchr(f, ':'); |
| if (n) |
| *n = '\0'; |
| if(stat(f, &s) < 0) { |
| fprintf(stderr, "Can't stat file '%s': %s\n", f, strerror(errno)); |
| goto out; |
| } |
| acpi_hdr.length += s.st_size; |
| if (!n) |
| break; |
| *n = ':'; |
| f = n + 1; |
| } |
| |
| if (!acpi_tables) { |
| acpi_tables_len = sizeof(uint16_t); |
| acpi_tables = qemu_mallocz(acpi_tables_len); |
| } |
| p = acpi_tables + acpi_tables_len; |
| acpi_tables_len += sizeof(uint16_t) + acpi_hdr.length; |
| acpi_tables = qemu_realloc(acpi_tables, acpi_tables_len); |
| |
| acpi_hdr.length = cpu_to_le32(acpi_hdr.length); |
| *(uint16_t*)p = acpi_hdr.length; |
| p += sizeof(uint16_t); |
| memcpy(p, &acpi_hdr, sizeof(acpi_hdr)); |
| off = sizeof(acpi_hdr); |
| |
| f = buf; |
| while (buf[0]) { |
| struct stat s; |
| int fd; |
| char *n = strchr(f, ':'); |
| if (n) |
| *n = '\0'; |
| fd = open(f, O_RDONLY); |
| |
| if(fd < 0) |
| goto out; |
| if(fstat(fd, &s) < 0) { |
| close(fd); |
| goto out; |
| } |
| |
| do { |
| int r; |
| r = read(fd, p + off, s.st_size); |
| if (r > 0) { |
| off += r; |
| s.st_size -= r; |
| } else if ((r < 0 && errno != EINTR) || r == 0) { |
| close(fd); |
| goto out; |
| } |
| } while(s.st_size); |
| |
| close(fd); |
| if (!n) |
| break; |
| f = n + 1; |
| } |
| |
| ((struct acpi_table_header*)p)->checksum = acpi_checksum((uint8_t*)p, off); |
| /* increase number of tables */ |
| (*(uint16_t*)acpi_tables) = |
| cpu_to_le32(le32_to_cpu(*(uint16_t*)acpi_tables) + 1); |
| return 0; |
| out: |
| if (acpi_tables) { |
| free(acpi_tables); |
| acpi_tables = NULL; |
| } |
| return -1; |
| } |