| #include "hw.h" |
| #include "mips.h" |
| #include "net.h" |
| #include "isa.h" |
| |
| //#define DEBUG_MIPSNET_SEND |
| //#define DEBUG_MIPSNET_RECEIVE |
| //#define DEBUG_MIPSNET_DATA |
| //#define DEBUG_MIPSNET_IRQ |
| |
| /* MIPSnet register offsets */ |
| |
| #define MIPSNET_DEV_ID 0x00 |
| #define MIPSNET_BUSY 0x08 |
| #define MIPSNET_RX_DATA_COUNT 0x0c |
| #define MIPSNET_TX_DATA_COUNT 0x10 |
| #define MIPSNET_INT_CTL 0x14 |
| # define MIPSNET_INTCTL_TXDONE 0x00000001 |
| # define MIPSNET_INTCTL_RXDONE 0x00000002 |
| # define MIPSNET_INTCTL_TESTBIT 0x80000000 |
| #define MIPSNET_INTERRUPT_INFO 0x18 |
| #define MIPSNET_RX_DATA_BUFFER 0x1c |
| #define MIPSNET_TX_DATA_BUFFER 0x20 |
| |
| #define MAX_ETH_FRAME_SIZE 1514 |
| |
| typedef struct MIPSnetState { |
| uint32_t busy; |
| uint32_t rx_count; |
| uint32_t rx_read; |
| uint32_t tx_count; |
| uint32_t tx_written; |
| uint32_t intctl; |
| uint8_t rx_buffer[MAX_ETH_FRAME_SIZE]; |
| uint8_t tx_buffer[MAX_ETH_FRAME_SIZE]; |
| int io_base; |
| qemu_irq irq; |
| NICState *nic; |
| NICConf conf; |
| } MIPSnetState; |
| |
| static void mipsnet_reset(MIPSnetState *s) |
| { |
| s->busy = 1; |
| s->rx_count = 0; |
| s->rx_read = 0; |
| s->tx_count = 0; |
| s->tx_written = 0; |
| s->intctl = 0; |
| memset(s->rx_buffer, 0, MAX_ETH_FRAME_SIZE); |
| memset(s->tx_buffer, 0, MAX_ETH_FRAME_SIZE); |
| } |
| |
| static void mipsnet_update_irq(MIPSnetState *s) |
| { |
| int isr = !!s->intctl; |
| #ifdef DEBUG_MIPSNET_IRQ |
| printf("mipsnet: Set IRQ to %d (%02x)\n", isr, s->intctl); |
| #endif |
| qemu_set_irq(s->irq, isr); |
| } |
| |
| static int mipsnet_buffer_full(MIPSnetState *s) |
| { |
| if (s->rx_count >= MAX_ETH_FRAME_SIZE) |
| return 1; |
| return 0; |
| } |
| |
| static int mipsnet_can_receive(VLANClientState *nc) |
| { |
| MIPSnetState *s = DO_UPCAST(NICState, nc, nc)->opaque; |
| |
| if (s->busy) |
| return 0; |
| return !mipsnet_buffer_full(s); |
| } |
| |
| static ssize_t mipsnet_receive(VLANClientState *nc, const uint8_t *buf, size_t size) |
| { |
| MIPSnetState *s = DO_UPCAST(NICState, nc, nc)->opaque; |
| |
| #ifdef DEBUG_MIPSNET_RECEIVE |
| printf("mipsnet: receiving len=%zu\n", size); |
| #endif |
| if (!mipsnet_can_receive(nc)) |
| return -1; |
| |
| s->busy = 1; |
| |
| /* Just accept everything. */ |
| |
| /* Write packet data. */ |
| memcpy(s->rx_buffer, buf, size); |
| |
| s->rx_count = size; |
| s->rx_read = 0; |
| |
| /* Now we can signal we have received something. */ |
| s->intctl |= MIPSNET_INTCTL_RXDONE; |
| mipsnet_update_irq(s); |
| |
| return size; |
| } |
| |
| static uint32_t mipsnet_ioport_read(void *opaque, uint32_t addr) |
| { |
| MIPSnetState *s = opaque; |
| int ret = 0; |
| |
| addr &= 0x3f; |
| switch (addr) { |
| case MIPSNET_DEV_ID: |
| ret = be32_to_cpu(0x4d495053); /* MIPS */ |
| break; |
| case MIPSNET_DEV_ID + 4: |
| ret = be32_to_cpu(0x4e455430); /* NET0 */ |
| break; |
| case MIPSNET_BUSY: |
| ret = s->busy; |
| break; |
| case MIPSNET_RX_DATA_COUNT: |
| ret = s->rx_count; |
| break; |
| case MIPSNET_TX_DATA_COUNT: |
| ret = s->tx_count; |
| break; |
| case MIPSNET_INT_CTL: |
| ret = s->intctl; |
| s->intctl &= ~MIPSNET_INTCTL_TESTBIT; |
| break; |
| case MIPSNET_INTERRUPT_INFO: |
| /* XXX: This seems to be a per-VPE interrupt number. */ |
| ret = 0; |
| break; |
| case MIPSNET_RX_DATA_BUFFER: |
| if (s->rx_count) { |
| s->rx_count--; |
| ret = s->rx_buffer[s->rx_read++]; |
| } |
| break; |
| /* Reads as zero. */ |
| case MIPSNET_TX_DATA_BUFFER: |
| default: |
| break; |
| } |
| #ifdef DEBUG_MIPSNET_DATA |
| printf("mipsnet: read addr=0x%02x val=0x%02x\n", addr, ret); |
| #endif |
| return ret; |
| } |
| |
| static void mipsnet_ioport_write(void *opaque, uint32_t addr, uint32_t val) |
| { |
| MIPSnetState *s = opaque; |
| |
| addr &= 0x3f; |
| #ifdef DEBUG_MIPSNET_DATA |
| printf("mipsnet: write addr=0x%02x val=0x%02x\n", addr, val); |
| #endif |
| switch (addr) { |
| case MIPSNET_TX_DATA_COUNT: |
| s->tx_count = (val <= MAX_ETH_FRAME_SIZE) ? val : 0; |
| s->tx_written = 0; |
| break; |
| case MIPSNET_INT_CTL: |
| if (val & MIPSNET_INTCTL_TXDONE) { |
| s->intctl &= ~MIPSNET_INTCTL_TXDONE; |
| } else if (val & MIPSNET_INTCTL_RXDONE) { |
| s->intctl &= ~MIPSNET_INTCTL_RXDONE; |
| } else if (val & MIPSNET_INTCTL_TESTBIT) { |
| mipsnet_reset(s); |
| s->intctl |= MIPSNET_INTCTL_TESTBIT; |
| } else if (!val) { |
| /* ACK testbit interrupt, flag was cleared on read. */ |
| } |
| s->busy = !!s->intctl; |
| mipsnet_update_irq(s); |
| break; |
| case MIPSNET_TX_DATA_BUFFER: |
| s->tx_buffer[s->tx_written++] = val; |
| if (s->tx_written == s->tx_count) { |
| /* Send buffer. */ |
| #ifdef DEBUG_MIPSNET_SEND |
| printf("mipsnet: sending len=%d\n", s->tx_count); |
| #endif |
| qemu_send_packet(&s->nic->nc, s->tx_buffer, s->tx_count); |
| s->tx_count = s->tx_written = 0; |
| s->intctl |= MIPSNET_INTCTL_TXDONE; |
| s->busy = 1; |
| mipsnet_update_irq(s); |
| } |
| break; |
| /* Read-only registers */ |
| case MIPSNET_DEV_ID: |
| case MIPSNET_BUSY: |
| case MIPSNET_RX_DATA_COUNT: |
| case MIPSNET_INTERRUPT_INFO: |
| case MIPSNET_RX_DATA_BUFFER: |
| default: |
| break; |
| } |
| } |
| |
| static const VMStateDescription vmstate_mipsnet = { |
| .name = "mipsnet", |
| .version_id = 0, |
| .minimum_version_id = 0, |
| .minimum_version_id_old = 0, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32(busy, MIPSnetState), |
| VMSTATE_UINT32(rx_count, MIPSnetState), |
| VMSTATE_UINT32(rx_read, MIPSnetState), |
| VMSTATE_UINT32(tx_count, MIPSnetState), |
| VMSTATE_UINT32(tx_written, MIPSnetState), |
| VMSTATE_UINT32(intctl, MIPSnetState), |
| VMSTATE_BUFFER(rx_buffer, MIPSnetState), |
| VMSTATE_BUFFER(tx_buffer, MIPSnetState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void mipsnet_cleanup(VLANClientState *nc) |
| { |
| MIPSnetState *s = DO_UPCAST(NICState, nc, nc)->opaque; |
| |
| vmstate_unregister(NULL, &vmstate_mipsnet, s); |
| |
| isa_unassign_ioport(s->io_base, 36); |
| |
| qemu_free(s); |
| } |
| |
| static NetClientInfo net_mipsnet_info = { |
| .type = NET_CLIENT_TYPE_NIC, |
| .size = sizeof(NICState), |
| .can_receive = mipsnet_can_receive, |
| .receive = mipsnet_receive, |
| .cleanup = mipsnet_cleanup, |
| }; |
| |
| void mipsnet_init (int base, qemu_irq irq, NICInfo *nd) |
| { |
| MIPSnetState *s; |
| |
| qemu_check_nic_model(nd, "mipsnet"); |
| |
| s = qemu_mallocz(sizeof(MIPSnetState)); |
| |
| register_ioport_write(base, 36, 1, mipsnet_ioport_write, s); |
| register_ioport_read(base, 36, 1, mipsnet_ioport_read, s); |
| register_ioport_write(base, 36, 2, mipsnet_ioport_write, s); |
| register_ioport_read(base, 36, 2, mipsnet_ioport_read, s); |
| register_ioport_write(base, 36, 4, mipsnet_ioport_write, s); |
| register_ioport_read(base, 36, 4, mipsnet_ioport_read, s); |
| |
| s->io_base = base; |
| s->irq = irq; |
| |
| if (nd) { |
| memcpy(s->conf.macaddr.a, nd->macaddr, sizeof(nd->macaddr)); |
| s->conf.vlan = nd->vlan; |
| s->conf.peer = nd->netdev; |
| |
| s->nic = qemu_new_nic(&net_mipsnet_info, &s->conf, |
| nd->model, nd->name, s); |
| |
| qemu_format_nic_info_str(&s->nic->nc, s->conf.macaddr.a); |
| } |
| |
| mipsnet_reset(s); |
| vmstate_register(NULL, 0, &vmstate_mipsnet, s); |
| } |