| #!/bin/sh |
| # |
| # qemu configure script (c) 2003 Fabrice Bellard |
| # |
| |
| # Unset some variables known to interfere with behavior of common tools, |
| # just as autoconf does. |
| CLICOLOR_FORCE= GREP_OPTIONS= |
| unset CLICOLOR_FORCE GREP_OPTIONS |
| |
| # Temporary directory used for files created while |
| # configure runs. Since it is in the build directory |
| # we can safely blow away any previous version of it |
| # (and we need not jump through hoops to try to delete |
| # it when configure exits.) |
| TMPDIR1="config-temp" |
| rm -rf "${TMPDIR1}" |
| mkdir -p "${TMPDIR1}" |
| if [ $? -ne 0 ]; then |
| echo "ERROR: failed to create temporary directory" |
| exit 1 |
| fi |
| |
| TMPB="qemu-conf" |
| TMPC="${TMPDIR1}/${TMPB}.c" |
| TMPO="${TMPDIR1}/${TMPB}.o" |
| TMPCXX="${TMPDIR1}/${TMPB}.cxx" |
| TMPL="${TMPDIR1}/${TMPB}.lo" |
| TMPA="${TMPDIR1}/lib${TMPB}.la" |
| TMPE="${TMPDIR1}/${TMPB}.exe" |
| |
| rm -f config.log |
| |
| # Print a helpful header at the top of config.log |
| echo "# QEMU configure log $(date)" >> config.log |
| printf "# Configured with:" >> config.log |
| printf " '%s'" "$0" "$@" >> config.log |
| echo >> config.log |
| echo "#" >> config.log |
| |
| error_exit() { |
| echo |
| echo "ERROR: $1" |
| while test -n "$2"; do |
| echo " $2" |
| shift |
| done |
| echo |
| exit 1 |
| } |
| |
| do_compiler() { |
| # Run the compiler, capturing its output to the log. First argument |
| # is compiler binary to execute. |
| local compiler="$1" |
| shift |
| echo $compiler "$@" >> config.log |
| $compiler "$@" >> config.log 2>&1 || return $? |
| # Test passed. If this is an --enable-werror build, rerun |
| # the test with -Werror and bail out if it fails. This |
| # makes warning-generating-errors in configure test code |
| # obvious to developers. |
| if test "$werror" != "yes"; then |
| return 0 |
| fi |
| # Don't bother rerunning the compile if we were already using -Werror |
| case "$*" in |
| *-Werror*) |
| return 0 |
| ;; |
| esac |
| echo $compiler -Werror "$@" >> config.log |
| $compiler -Werror "$@" >> config.log 2>&1 && return $? |
| error_exit "configure test passed without -Werror but failed with -Werror." \ |
| "This is probably a bug in the configure script. The failing command" \ |
| "will be at the bottom of config.log." \ |
| "You can run configure with --disable-werror to bypass this check." |
| } |
| |
| do_cc() { |
| do_compiler "$cc" "$@" |
| } |
| |
| do_cxx() { |
| do_compiler "$cxx" "$@" |
| } |
| |
| update_cxxflags() { |
| # Set QEMU_CXXFLAGS from QEMU_CFLAGS by filtering out those |
| # options which some versions of GCC's C++ compiler complain about |
| # because they only make sense for C programs. |
| QEMU_CXXFLAGS= |
| for arg in $QEMU_CFLAGS; do |
| case $arg in |
| -Wstrict-prototypes|-Wmissing-prototypes|-Wnested-externs|\ |
| -Wold-style-declaration|-Wold-style-definition|-Wredundant-decls) |
| ;; |
| *) |
| QEMU_CXXFLAGS=${QEMU_CXXFLAGS:+$QEMU_CXXFLAGS }$arg |
| ;; |
| esac |
| done |
| } |
| |
| compile_object() { |
| do_cc $QEMU_CFLAGS -c -o $TMPO $TMPC |
| } |
| |
| compile_prog() { |
| local_cflags="$1" |
| local_ldflags="$2" |
| do_cc $QEMU_CFLAGS $local_cflags -o $TMPE $TMPC $LDFLAGS $local_ldflags |
| } |
| |
| do_libtool() { |
| local mode=$1 |
| shift |
| # Run the compiler, capturing its output to the log. |
| echo $libtool $mode --tag=CC $cc "$@" >> config.log |
| $libtool $mode --tag=CC $cc "$@" >> config.log 2>&1 || return $? |
| # Test passed. If this is an --enable-werror build, rerun |
| # the test with -Werror and bail out if it fails. This |
| # makes warning-generating-errors in configure test code |
| # obvious to developers. |
| if test "$werror" != "yes"; then |
| return 0 |
| fi |
| # Don't bother rerunning the compile if we were already using -Werror |
| case "$*" in |
| *-Werror*) |
| return 0 |
| ;; |
| esac |
| echo $libtool $mode --tag=CC $cc -Werror "$@" >> config.log |
| $libtool $mode --tag=CC $cc -Werror "$@" >> config.log 2>&1 && return $? |
| error_exit "configure test passed without -Werror but failed with -Werror." \ |
| "This is probably a bug in the configure script. The failing command" \ |
| "will be at the bottom of config.log." \ |
| "You can run configure with --disable-werror to bypass this check." |
| } |
| |
| libtool_prog() { |
| do_libtool --mode=compile $QEMU_CFLAGS -c -fPIE -DPIE -o $TMPO $TMPC || return $? |
| do_libtool --mode=link $LDFLAGS -o $TMPA $TMPL -rpath /usr/local/lib |
| } |
| |
| # symbolically link $1 to $2. Portable version of "ln -sf". |
| symlink() { |
| rm -rf "$2" |
| mkdir -p "$(dirname "$2")" |
| ln -s "$1" "$2" |
| } |
| |
| # check whether a command is available to this shell (may be either an |
| # executable or a builtin) |
| has() { |
| type "$1" >/dev/null 2>&1 |
| } |
| |
| # search for an executable in PATH |
| path_of() { |
| local_command="$1" |
| local_ifs="$IFS" |
| local_dir="" |
| |
| # pathname has a dir component? |
| if [ "${local_command#*/}" != "$local_command" ]; then |
| if [ -x "$local_command" ] && [ ! -d "$local_command" ]; then |
| echo "$local_command" |
| return 0 |
| fi |
| fi |
| if [ -z "$local_command" ]; then |
| return 1 |
| fi |
| |
| IFS=: |
| for local_dir in $PATH; do |
| if [ -x "$local_dir/$local_command" ] && [ ! -d "$local_dir/$local_command" ]; then |
| echo "$local_dir/$local_command" |
| IFS="${local_ifs:-$(printf ' \t\n')}" |
| return 0 |
| fi |
| done |
| # not found |
| IFS="${local_ifs:-$(printf ' \t\n')}" |
| return 1 |
| } |
| |
| have_backend () { |
| echo "$trace_backends" | grep "$1" >/dev/null |
| } |
| |
| # default parameters |
| source_path=`dirname "$0"` |
| cpu="" |
| iasl="iasl" |
| interp_prefix="/usr/gnemul/qemu-%M" |
| static="no" |
| cross_prefix="" |
| audio_drv_list="" |
| block_drv_rw_whitelist="" |
| block_drv_ro_whitelist="" |
| host_cc="cc" |
| libs_softmmu="" |
| libs_tools="" |
| audio_pt_int="" |
| audio_win_int="" |
| cc_i386=i386-pc-linux-gnu-gcc |
| libs_qga="" |
| debug_info="yes" |
| stack_protector="" |
| |
| # Don't accept a target_list environment variable. |
| unset target_list |
| |
| # Default value for a variable defining feature "foo". |
| # * foo="no" feature will only be used if --enable-foo arg is given |
| # * foo="" feature will be searched for, and if found, will be used |
| # unless --disable-foo is given |
| # * foo="yes" this value will only be set by --enable-foo flag. |
| # feature will searched for, |
| # if not found, configure exits with error |
| # |
| # Always add --enable-foo and --disable-foo command line args. |
| # Distributions want to ensure that several features are compiled in, and it |
| # is impossible without a --enable-foo that exits if a feature is not found. |
| |
| bluez="" |
| brlapi="" |
| curl="" |
| curses="" |
| docs="" |
| fdt="" |
| netmap="no" |
| pixman="" |
| sdl="" |
| sdlabi="1.2" |
| virtfs="" |
| vnc="yes" |
| sparse="no" |
| uuid="" |
| vde="" |
| vnc_tls="" |
| vnc_sasl="" |
| vnc_jpeg="" |
| vnc_png="" |
| vnc_ws="" |
| xen="" |
| xen_ctrl_version="" |
| xen_pci_passthrough="" |
| linux_aio="" |
| cap_ng="" |
| attr="" |
| libattr="" |
| xfs="" |
| |
| vhost_net="no" |
| vhost_scsi="no" |
| kvm="no" |
| rdma="" |
| gprof="no" |
| debug_tcg="no" |
| debug="no" |
| strip_opt="yes" |
| tcg_interpreter="no" |
| bigendian="no" |
| mingw32="no" |
| gcov="no" |
| gcov_tool="gcov" |
| EXESUF="" |
| DSOSUF=".so" |
| LDFLAGS_SHARED="-shared" |
| modules="no" |
| prefix="/usr/local" |
| mandir="\${prefix}/share/man" |
| datadir="\${prefix}/share" |
| qemu_docdir="\${prefix}/share/doc/qemu" |
| bindir="\${prefix}/bin" |
| libdir="\${prefix}/lib" |
| libexecdir="\${prefix}/libexec" |
| includedir="\${prefix}/include" |
| sysconfdir="\${prefix}/etc" |
| local_statedir="\${prefix}/var" |
| confsuffix="/qemu" |
| slirp="yes" |
| fmod_lib="" |
| fmod_inc="" |
| oss_lib="" |
| bsd="no" |
| linux="no" |
| solaris="no" |
| profiler="no" |
| cocoa="no" |
| softmmu="yes" |
| linux_user="no" |
| bsd_user="no" |
| guest_base="yes" |
| aix="no" |
| blobs="yes" |
| pkgversion="" |
| pie="" |
| zero_malloc="" |
| qom_cast_debug="yes" |
| trace_backends="nop" |
| trace_file="trace" |
| spice="" |
| rbd="" |
| smartcard_nss="" |
| libusb="" |
| usb_redir="" |
| opengl="" |
| zlib="yes" |
| lzo="" |
| snappy="" |
| bzip2="" |
| guest_agent="" |
| guest_agent_with_vss="no" |
| vss_win32_sdk="" |
| win_sdk="no" |
| want_tools="yes" |
| libiscsi="" |
| libnfs="" |
| coroutine="" |
| coroutine_pool="" |
| seccomp="" |
| glusterfs="" |
| glusterfs_discard="no" |
| glusterfs_zerofill="no" |
| archipelago="no" |
| gtk="" |
| gtkabi="" |
| vte="" |
| tpm="yes" |
| libssh2="" |
| vhdx="" |
| quorum="" |
| numa="" |
| tcmalloc="no" |
| |
| # parse CC options first |
| for opt do |
| optarg=`expr "x$opt" : 'x[^=]*=\(.*\)'` |
| case "$opt" in |
| --cross-prefix=*) cross_prefix="$optarg" |
| ;; |
| --cc=*) CC="$optarg" |
| ;; |
| --cxx=*) CXX="$optarg" |
| ;; |
| --source-path=*) source_path="$optarg" |
| ;; |
| --cpu=*) cpu="$optarg" |
| ;; |
| --extra-cflags=*) QEMU_CFLAGS="$optarg $QEMU_CFLAGS" |
| EXTRA_CFLAGS="$optarg" |
| ;; |
| --extra-ldflags=*) LDFLAGS="$optarg $LDFLAGS" |
| EXTRA_LDFLAGS="$optarg" |
| ;; |
| --enable-debug-info) debug_info="yes" |
| ;; |
| --disable-debug-info) debug_info="no" |
| ;; |
| esac |
| done |
| # OS specific |
| # Using uname is really, really broken. Once we have the right set of checks |
| # we can eliminate its usage altogether. |
| |
| # Preferred compiler: |
| # ${CC} (if set) |
| # ${cross_prefix}gcc (if cross-prefix specified) |
| # system compiler |
| if test -z "${CC}${cross_prefix}"; then |
| cc="$host_cc" |
| else |
| cc="${CC-${cross_prefix}gcc}" |
| fi |
| |
| if test -z "${CXX}${cross_prefix}"; then |
| cxx="c++" |
| else |
| cxx="${CXX-${cross_prefix}g++}" |
| fi |
| |
| ar="${AR-${cross_prefix}ar}" |
| as="${AS-${cross_prefix}as}" |
| cpp="${CPP-$cc -E}" |
| objcopy="${OBJCOPY-${cross_prefix}objcopy}" |
| ld="${LD-${cross_prefix}ld}" |
| libtool="${LIBTOOL-${cross_prefix}libtool}" |
| nm="${NM-${cross_prefix}nm}" |
| strip="${STRIP-${cross_prefix}strip}" |
| windres="${WINDRES-${cross_prefix}windres}" |
| pkg_config_exe="${PKG_CONFIG-${cross_prefix}pkg-config}" |
| query_pkg_config() { |
| "${pkg_config_exe}" ${QEMU_PKG_CONFIG_FLAGS} "$@" |
| } |
| pkg_config=query_pkg_config |
| sdl_config="${SDL_CONFIG-${cross_prefix}sdl-config}" |
| sdl2_config="${SDL2_CONFIG-${cross_prefix}sdl2-config}" |
| |
| # If the user hasn't specified ARFLAGS, default to 'rv', just as make does. |
| ARFLAGS="${ARFLAGS-rv}" |
| |
| # default flags for all hosts |
| QEMU_CFLAGS="-fno-strict-aliasing -fno-common $QEMU_CFLAGS" |
| QEMU_CFLAGS="-Wall -Wundef -Wwrite-strings -Wmissing-prototypes $QEMU_CFLAGS" |
| QEMU_CFLAGS="-Wstrict-prototypes -Wredundant-decls $QEMU_CFLAGS" |
| QEMU_CFLAGS="-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE $QEMU_CFLAGS" |
| QEMU_INCLUDES="-I. -I\$(SRC_PATH) -I\$(SRC_PATH)/include" |
| if test "$debug_info" = "yes"; then |
| CFLAGS="-g $CFLAGS" |
| LDFLAGS="-g $LDFLAGS" |
| fi |
| |
| # make source path absolute |
| source_path=`cd "$source_path"; pwd` |
| |
| # running configure in the source tree? |
| # we know that's the case if configure is there. |
| if test -f "./configure"; then |
| pwd_is_source_path="y" |
| else |
| pwd_is_source_path="n" |
| fi |
| |
| check_define() { |
| cat > $TMPC <<EOF |
| #if !defined($1) |
| #error $1 not defined |
| #endif |
| int main(void) { return 0; } |
| EOF |
| compile_object |
| } |
| |
| if check_define __linux__ ; then |
| targetos="Linux" |
| elif check_define _WIN32 ; then |
| targetos='MINGW32' |
| elif check_define __OpenBSD__ ; then |
| targetos='OpenBSD' |
| elif check_define __sun__ ; then |
| targetos='SunOS' |
| elif check_define __HAIKU__ ; then |
| targetos='Haiku' |
| else |
| targetos=`uname -s` |
| fi |
| |
| # Some host OSes need non-standard checks for which CPU to use. |
| # Note that these checks are broken for cross-compilation: if you're |
| # cross-compiling to one of these OSes then you'll need to specify |
| # the correct CPU with the --cpu option. |
| case $targetos in |
| Darwin) |
| # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can |
| # run 64-bit userspace code. |
| # If the user didn't specify a CPU explicitly and the kernel says this is |
| # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code. |
| if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then |
| cpu="x86_64" |
| fi |
| ;; |
| SunOS) |
| # `uname -m` returns i86pc even on an x86_64 box, so default based on isainfo |
| if test -z "$cpu" && test "$(isainfo -k)" = "amd64"; then |
| cpu="x86_64" |
| fi |
| esac |
| |
| if test ! -z "$cpu" ; then |
| # command line argument |
| : |
| elif check_define __i386__ ; then |
| cpu="i386" |
| elif check_define __x86_64__ ; then |
| if check_define __ILP32__ ; then |
| cpu="x32" |
| else |
| cpu="x86_64" |
| fi |
| elif check_define __sparc__ ; then |
| if check_define __arch64__ ; then |
| cpu="sparc64" |
| else |
| cpu="sparc" |
| fi |
| elif check_define _ARCH_PPC ; then |
| if check_define _ARCH_PPC64 ; then |
| cpu="ppc64" |
| else |
| cpu="ppc" |
| fi |
| elif check_define __mips__ ; then |
| cpu="mips" |
| elif check_define __ia64__ ; then |
| cpu="ia64" |
| elif check_define __s390__ ; then |
| if check_define __s390x__ ; then |
| cpu="s390x" |
| else |
| cpu="s390" |
| fi |
| elif check_define __arm__ ; then |
| cpu="arm" |
| elif check_define __aarch64__ ; then |
| cpu="aarch64" |
| elif check_define __hppa__ ; then |
| cpu="hppa" |
| else |
| cpu=`uname -m` |
| fi |
| |
| ARCH= |
| # Normalise host CPU name and set ARCH. |
| # Note that this case should only have supported host CPUs, not guests. |
| case "$cpu" in |
| ia64|ppc|ppc64|s390|s390x|sparc64|x32) |
| cpu="$cpu" |
| ;; |
| i386|i486|i586|i686|i86pc|BePC) |
| cpu="i386" |
| ;; |
| x86_64|amd64) |
| cpu="x86_64" |
| ;; |
| armv*b|armv*l|arm) |
| cpu="arm" |
| ;; |
| aarch64) |
| cpu="aarch64" |
| ;; |
| mips*) |
| cpu="mips" |
| ;; |
| sparc|sun4[cdmuv]) |
| cpu="sparc" |
| ;; |
| *) |
| # This will result in either an error or falling back to TCI later |
| ARCH=unknown |
| ;; |
| esac |
| if test -z "$ARCH"; then |
| ARCH="$cpu" |
| fi |
| |
| # OS specific |
| |
| # host *BSD for user mode |
| HOST_VARIANT_DIR="" |
| |
| case $targetos in |
| CYGWIN*) |
| mingw32="yes" |
| QEMU_CFLAGS="-mno-cygwin $QEMU_CFLAGS" |
| audio_possible_drivers="winwave sdl" |
| audio_drv_list="winwave" |
| ;; |
| MINGW32*) |
| mingw32="yes" |
| audio_possible_drivers="winwave dsound sdl fmod" |
| audio_drv_list="winwave" |
| ;; |
| GNU/kFreeBSD) |
| bsd="yes" |
| audio_drv_list="oss" |
| audio_possible_drivers="oss sdl esd pa" |
| ;; |
| FreeBSD) |
| bsd="yes" |
| make="${MAKE-gmake}" |
| audio_drv_list="oss" |
| audio_possible_drivers="oss sdl esd pa" |
| # needed for kinfo_getvmmap(3) in libutil.h |
| LIBS="-lutil $LIBS" |
| netmap="" # enable netmap autodetect |
| HOST_VARIANT_DIR="freebsd" |
| ;; |
| DragonFly) |
| bsd="yes" |
| make="${MAKE-gmake}" |
| audio_drv_list="oss" |
| audio_possible_drivers="oss sdl esd pa" |
| HOST_VARIANT_DIR="dragonfly" |
| ;; |
| NetBSD) |
| bsd="yes" |
| make="${MAKE-gmake}" |
| audio_drv_list="oss" |
| audio_possible_drivers="oss sdl esd" |
| oss_lib="-lossaudio" |
| HOST_VARIANT_DIR="netbsd" |
| ;; |
| OpenBSD) |
| bsd="yes" |
| make="${MAKE-gmake}" |
| audio_drv_list="sdl" |
| audio_possible_drivers="sdl esd" |
| HOST_VARIANT_DIR="openbsd" |
| ;; |
| Darwin) |
| bsd="yes" |
| darwin="yes" |
| LDFLAGS_SHARED="-bundle -undefined dynamic_lookup" |
| if [ "$cpu" = "x86_64" ] ; then |
| QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" |
| LDFLAGS="-arch x86_64 $LDFLAGS" |
| fi |
| cocoa="yes" |
| audio_drv_list="coreaudio" |
| audio_possible_drivers="coreaudio sdl fmod" |
| LDFLAGS="-framework CoreFoundation -framework IOKit $LDFLAGS" |
| libs_softmmu="-F/System/Library/Frameworks -framework Cocoa -framework IOKit $libs_softmmu" |
| # Disable attempts to use ObjectiveC features in os/object.h since they |
| # won't work when we're compiling with gcc as a C compiler. |
| QEMU_CFLAGS="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS" |
| HOST_VARIANT_DIR="darwin" |
| ;; |
| SunOS) |
| solaris="yes" |
| make="${MAKE-gmake}" |
| install="${INSTALL-ginstall}" |
| ld="gld" |
| smbd="${SMBD-/usr/sfw/sbin/smbd}" |
| needs_libsunmath="no" |
| solarisrev=`uname -r | cut -f2 -d.` |
| if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then |
| if test "$solarisrev" -le 9 ; then |
| if test -f /opt/SUNWspro/prod/lib/libsunmath.so.1; then |
| needs_libsunmath="yes" |
| QEMU_CFLAGS="-I/opt/SUNWspro/prod/include/cc $QEMU_CFLAGS" |
| LDFLAGS="-L/opt/SUNWspro/prod/lib -R/opt/SUNWspro/prod/lib $LDFLAGS" |
| LIBS="-lsunmath $LIBS" |
| else |
| error_exit "QEMU will not link correctly on Solaris 8/X86 or 9/x86 without" \ |
| "libsunmath from the Sun Studio compilers tools, due to a lack of" \ |
| "C99 math features in libm.so in Solaris 8/x86 and Solaris 9/x86" \ |
| "Studio 11 can be downloaded from www.sun.com." |
| fi |
| fi |
| fi |
| if test -f /usr/include/sys/soundcard.h ; then |
| audio_drv_list="oss" |
| fi |
| audio_possible_drivers="oss sdl" |
| # needed for CMSG_ macros in sys/socket.h |
| QEMU_CFLAGS="-D_XOPEN_SOURCE=600 $QEMU_CFLAGS" |
| # needed for TIOCWIN* defines in termios.h |
| QEMU_CFLAGS="-D__EXTENSIONS__ $QEMU_CFLAGS" |
| QEMU_CFLAGS="-std=gnu99 $QEMU_CFLAGS" |
| solarisnetlibs="-lsocket -lnsl -lresolv" |
| LIBS="$solarisnetlibs $LIBS" |
| libs_qga="$solarisnetlibs $libs_qga" |
| ;; |
| AIX) |
| aix="yes" |
| make="${MAKE-gmake}" |
| ;; |
| Haiku) |
| haiku="yes" |
| QEMU_CFLAGS="-DB_USE_POSITIVE_POSIX_ERRORS $QEMU_CFLAGS" |
| LIBS="-lposix_error_mapper -lnetwork $LIBS" |
| ;; |
| *) |
| audio_drv_list="oss" |
| audio_possible_drivers="oss alsa sdl esd pa" |
| linux="yes" |
| linux_user="yes" |
| kvm="yes" |
| vhost_net="yes" |
| vhost_scsi="yes" |
| if [ "$cpu" = "i386" -o "$cpu" = "x86_64" -o "$cpu" = "x32" ] ; then |
| audio_possible_drivers="$audio_possible_drivers fmod" |
| fi |
| QEMU_INCLUDES="-I\$(SRC_PATH)/linux-headers -I$(pwd)/linux-headers $QEMU_INCLUDES" |
| ;; |
| esac |
| |
| if [ "$bsd" = "yes" ] ; then |
| if [ "$darwin" != "yes" ] ; then |
| bsd_user="yes" |
| fi |
| fi |
| |
| : ${make=${MAKE-make}} |
| : ${install=${INSTALL-install}} |
| : ${python=${PYTHON-python}} |
| : ${smbd=${SMBD-/usr/sbin/smbd}} |
| |
| # Default objcc to clang if available, otherwise use CC |
| if has clang; then |
| objcc=clang |
| else |
| objcc="$cc" |
| fi |
| |
| if test "$mingw32" = "yes" ; then |
| EXESUF=".exe" |
| DSOSUF=".dll" |
| QEMU_CFLAGS="-DWIN32_LEAN_AND_MEAN -DWINVER=0x501 $QEMU_CFLAGS" |
| # enable C99/POSIX format strings (needs mingw32-runtime 3.15 or later) |
| QEMU_CFLAGS="-D__USE_MINGW_ANSI_STDIO=1 $QEMU_CFLAGS" |
| LIBS="-lwinmm -lws2_32 -liphlpapi $LIBS" |
| cat > $TMPC << EOF |
| int main(void) { return 0; } |
| EOF |
| if compile_prog "" "-liberty" ; then |
| LIBS="-liberty $LIBS" |
| fi |
| prefix="c:/Program Files/QEMU" |
| mandir="\${prefix}" |
| datadir="\${prefix}" |
| qemu_docdir="\${prefix}" |
| bindir="\${prefix}" |
| sysconfdir="\${prefix}" |
| local_statedir= |
| confsuffix="" |
| libs_qga="-lws2_32 -lwinmm -lpowrprof $libs_qga" |
| fi |
| |
| werror="" |
| |
| for opt do |
| optarg=`expr "x$opt" : 'x[^=]*=\(.*\)'` |
| case "$opt" in |
| --help|-h) show_help=yes |
| ;; |
| --version|-V) exec cat $source_path/VERSION |
| ;; |
| --prefix=*) prefix="$optarg" |
| ;; |
| --interp-prefix=*) interp_prefix="$optarg" |
| ;; |
| --source-path=*) |
| ;; |
| --cross-prefix=*) |
| ;; |
| --cc=*) |
| ;; |
| --host-cc=*) host_cc="$optarg" |
| ;; |
| --cxx=*) |
| ;; |
| --iasl=*) iasl="$optarg" |
| ;; |
| --objcc=*) objcc="$optarg" |
| ;; |
| --make=*) make="$optarg" |
| ;; |
| --install=*) install="$optarg" |
| ;; |
| --python=*) python="$optarg" |
| ;; |
| --gcov=*) gcov_tool="$optarg" |
| ;; |
| --smbd=*) smbd="$optarg" |
| ;; |
| --extra-cflags=*) |
| ;; |
| --extra-ldflags=*) |
| ;; |
| --enable-debug-info) |
| ;; |
| --disable-debug-info) |
| ;; |
| --enable-modules) |
| modules="yes" |
| ;; |
| --cpu=*) |
| ;; |
| --target-list=*) target_list="$optarg" |
| ;; |
| --enable-trace-backends=*) trace_backends="$optarg" |
| ;; |
| # XXX: backwards compatibility |
| --enable-trace-backend=*) trace_backends="$optarg" |
| ;; |
| --with-trace-file=*) trace_file="$optarg" |
| ;; |
| --enable-gprof) gprof="yes" |
| ;; |
| --enable-gcov) gcov="yes" |
| ;; |
| --static) |
| static="yes" |
| LDFLAGS="-static $LDFLAGS" |
| QEMU_PKG_CONFIG_FLAGS="--static $QEMU_PKG_CONFIG_FLAGS" |
| ;; |
| --mandir=*) mandir="$optarg" |
| ;; |
| --bindir=*) bindir="$optarg" |
| ;; |
| --libdir=*) libdir="$optarg" |
| ;; |
| --libexecdir=*) libexecdir="$optarg" |
| ;; |
| --includedir=*) includedir="$optarg" |
| ;; |
| --datadir=*) datadir="$optarg" |
| ;; |
| --with-confsuffix=*) confsuffix="$optarg" |
| ;; |
| --docdir=*) qemu_docdir="$optarg" |
| ;; |
| --sysconfdir=*) sysconfdir="$optarg" |
| ;; |
| --localstatedir=*) local_statedir="$optarg" |
| ;; |
| --sbindir=*|--sharedstatedir=*|\ |
| --oldincludedir=*|--datarootdir=*|--infodir=*|--localedir=*|\ |
| --htmldir=*|--dvidir=*|--pdfdir=*|--psdir=*) |
| # These switches are silently ignored, for compatibility with |
| # autoconf-generated configure scripts. This allows QEMU's |
| # configure to be used by RPM and similar macros that set |
| # lots of directory switches by default. |
| ;; |
| --with-system-pixman) pixman="system" |
| ;; |
| --without-system-pixman) pixman="internal" |
| ;; |
| --without-pixman) pixman="none" |
| ;; |
| --disable-sdl) sdl="no" |
| ;; |
| --enable-sdl) sdl="yes" |
| ;; |
| --with-sdlabi=*) sdlabi="$optarg" |
| ;; |
| --disable-qom-cast-debug) qom_cast_debug="no" |
| ;; |
| --enable-qom-cast-debug) qom_cast_debug="yes" |
| ;; |
| --disable-virtfs) virtfs="no" |
| ;; |
| --enable-virtfs) virtfs="yes" |
| ;; |
| --disable-vnc) vnc="no" |
| ;; |
| --enable-vnc) vnc="yes" |
| ;; |
| --fmod-lib=*) fmod_lib="$optarg" |
| ;; |
| --fmod-inc=*) fmod_inc="$optarg" |
| ;; |
| --oss-lib=*) oss_lib="$optarg" |
| ;; |
| --audio-drv-list=*) audio_drv_list="$optarg" |
| ;; |
| --block-drv-rw-whitelist=*|--block-drv-whitelist=*) block_drv_rw_whitelist=`echo "$optarg" | sed -e 's/,/ /g'` |
| ;; |
| --block-drv-ro-whitelist=*) block_drv_ro_whitelist=`echo "$optarg" | sed -e 's/,/ /g'` |
| ;; |
| --enable-debug-tcg) debug_tcg="yes" |
| ;; |
| --disable-debug-tcg) debug_tcg="no" |
| ;; |
| --enable-debug) |
| # Enable debugging options that aren't excessively noisy |
| debug_tcg="yes" |
| debug="yes" |
| strip_opt="no" |
| ;; |
| --enable-sparse) sparse="yes" |
| ;; |
| --disable-sparse) sparse="no" |
| ;; |
| --disable-strip) strip_opt="no" |
| ;; |
| --disable-vnc-tls) vnc_tls="no" |
| ;; |
| --enable-vnc-tls) vnc_tls="yes" |
| ;; |
| --disable-vnc-sasl) vnc_sasl="no" |
| ;; |
| --enable-vnc-sasl) vnc_sasl="yes" |
| ;; |
| --disable-vnc-jpeg) vnc_jpeg="no" |
| ;; |
| --enable-vnc-jpeg) vnc_jpeg="yes" |
| ;; |
| --disable-vnc-png) vnc_png="no" |
| ;; |
| --enable-vnc-png) vnc_png="yes" |
| ;; |
| --disable-vnc-ws) vnc_ws="no" |
| ;; |
| --enable-vnc-ws) vnc_ws="yes" |
| ;; |
| --disable-slirp) slirp="no" |
| ;; |
| --disable-uuid) uuid="no" |
| ;; |
| --enable-uuid) uuid="yes" |
| ;; |
| --disable-vde) vde="no" |
| ;; |
| --enable-vde) vde="yes" |
| ;; |
| --disable-netmap) netmap="no" |
| ;; |
| --enable-netmap) netmap="yes" |
| ;; |
| --disable-xen) xen="no" |
| ;; |
| --enable-xen) xen="yes" |
| ;; |
| --disable-xen-pci-passthrough) xen_pci_passthrough="no" |
| ;; |
| --enable-xen-pci-passthrough) xen_pci_passthrough="yes" |
| ;; |
| --disable-brlapi) brlapi="no" |
| ;; |
| --enable-brlapi) brlapi="yes" |
| ;; |
| --disable-bluez) bluez="no" |
| ;; |
| --enable-bluez) bluez="yes" |
| ;; |
| --disable-kvm) kvm="no" |
| ;; |
| --enable-kvm) kvm="yes" |
| ;; |
| --disable-tcg-interpreter) tcg_interpreter="no" |
| ;; |
| --enable-tcg-interpreter) tcg_interpreter="yes" |
| ;; |
| --disable-cap-ng) cap_ng="no" |
| ;; |
| --enable-cap-ng) cap_ng="yes" |
| ;; |
| --disable-spice) spice="no" |
| ;; |
| --enable-spice) spice="yes" |
| ;; |
| --disable-libiscsi) libiscsi="no" |
| ;; |
| --enable-libiscsi) libiscsi="yes" |
| ;; |
| --disable-libnfs) libnfs="no" |
| ;; |
| --enable-libnfs) libnfs="yes" |
| ;; |
| --enable-profiler) profiler="yes" |
| ;; |
| --disable-cocoa) cocoa="no" |
| ;; |
| --enable-cocoa) |
| cocoa="yes" ; |
| sdl="no" ; |
| audio_drv_list="coreaudio `echo $audio_drv_list | sed s,coreaudio,,g`" |
| ;; |
| --disable-system) softmmu="no" |
| ;; |
| --enable-system) softmmu="yes" |
| ;; |
| --disable-user) |
| linux_user="no" ; |
| bsd_user="no" ; |
| ;; |
| --enable-user) ;; |
| --disable-linux-user) linux_user="no" |
| ;; |
| --enable-linux-user) linux_user="yes" |
| ;; |
| --disable-bsd-user) bsd_user="no" |
| ;; |
| --enable-bsd-user) bsd_user="yes" |
| ;; |
| --enable-guest-base) guest_base="yes" |
| ;; |
| --disable-guest-base) guest_base="no" |
| ;; |
| --enable-pie) pie="yes" |
| ;; |
| --disable-pie) pie="no" |
| ;; |
| --enable-werror) werror="yes" |
| ;; |
| --disable-werror) werror="no" |
| ;; |
| --enable-stack-protector) stack_protector="yes" |
| ;; |
| --disable-stack-protector) stack_protector="no" |
| ;; |
| --disable-curses) curses="no" |
| ;; |
| --enable-curses) curses="yes" |
| ;; |
| --disable-curl) curl="no" |
| ;; |
| --enable-curl) curl="yes" |
| ;; |
| --disable-fdt) fdt="no" |
| ;; |
| --enable-fdt) fdt="yes" |
| ;; |
| --disable-linux-aio) linux_aio="no" |
| ;; |
| --enable-linux-aio) linux_aio="yes" |
| ;; |
| --disable-attr) attr="no" |
| ;; |
| --enable-attr) attr="yes" |
| ;; |
| --disable-blobs) blobs="no" |
| ;; |
| --with-pkgversion=*) pkgversion=" ($optarg)" |
| ;; |
| --with-coroutine=*) coroutine="$optarg" |
| ;; |
| --disable-coroutine-pool) coroutine_pool="no" |
| ;; |
| --enable-coroutine-pool) coroutine_pool="yes" |
| ;; |
| --disable-docs) docs="no" |
| ;; |
| --enable-docs) docs="yes" |
| ;; |
| --disable-vhost-net) vhost_net="no" |
| ;; |
| --enable-vhost-net) vhost_net="yes" |
| ;; |
| --disable-vhost-scsi) vhost_scsi="no" |
| ;; |
| --enable-vhost-scsi) vhost_scsi="yes" |
| ;; |
| --disable-opengl) opengl="no" |
| ;; |
| --enable-opengl) opengl="yes" |
| ;; |
| --disable-rbd) rbd="no" |
| ;; |
| --enable-rbd) rbd="yes" |
| ;; |
| --disable-xfsctl) xfs="no" |
| ;; |
| --enable-xfsctl) xfs="yes" |
| ;; |
| --disable-smartcard-nss) smartcard_nss="no" |
| ;; |
| --enable-smartcard-nss) smartcard_nss="yes" |
| ;; |
| --disable-libusb) libusb="no" |
| ;; |
| --enable-libusb) libusb="yes" |
| ;; |
| --disable-usb-redir) usb_redir="no" |
| ;; |
| --enable-usb-redir) usb_redir="yes" |
| ;; |
| --disable-zlib-test) zlib="no" |
| ;; |
| --disable-lzo) lzo="no" |
| ;; |
| --enable-lzo) lzo="yes" |
| ;; |
| --disable-snappy) snappy="no" |
| ;; |
| --enable-snappy) snappy="yes" |
| ;; |
| --disable-bzip2) bzip2="no" |
| ;; |
| --enable-bzip2) bzip2="yes" |
| ;; |
| --enable-guest-agent) guest_agent="yes" |
| ;; |
| --disable-guest-agent) guest_agent="no" |
| ;; |
| --with-vss-sdk) vss_win32_sdk="" |
| ;; |
| --with-vss-sdk=*) vss_win32_sdk="$optarg" |
| ;; |
| --without-vss-sdk) vss_win32_sdk="no" |
| ;; |
| --with-win-sdk) win_sdk="" |
| ;; |
| --with-win-sdk=*) win_sdk="$optarg" |
| ;; |
| --without-win-sdk) win_sdk="no" |
| ;; |
| --enable-tools) want_tools="yes" |
| ;; |
| --disable-tools) want_tools="no" |
| ;; |
| --enable-seccomp) seccomp="yes" |
| ;; |
| --disable-seccomp) seccomp="no" |
| ;; |
| --disable-glusterfs) glusterfs="no" |
| ;; |
| --enable-glusterfs) glusterfs="yes" |
| ;; |
| --disable-archipelago) archipelago="no" |
| ;; |
| --enable-archipelago) archipelago="yes" |
| ;; |
| --disable-virtio-blk-data-plane|--enable-virtio-blk-data-plane) |
| echo "$0: $opt is obsolete, virtio-blk data-plane is always on" >&2 |
| ;; |
| --disable-gtk) gtk="no" |
| ;; |
| --enable-gtk) gtk="yes" |
| ;; |
| --enable-rdma) rdma="yes" |
| ;; |
| --disable-rdma) rdma="no" |
| ;; |
| --with-gtkabi=*) gtkabi="$optarg" |
| ;; |
| --disable-vte) vte="no" |
| ;; |
| --enable-vte) vte="yes" |
| ;; |
| --disable-tpm) tpm="no" |
| ;; |
| --enable-tpm) tpm="yes" |
| ;; |
| --disable-libssh2) libssh2="no" |
| ;; |
| --enable-libssh2) libssh2="yes" |
| ;; |
| --enable-vhdx) vhdx="yes" |
| ;; |
| --disable-vhdx) vhdx="no" |
| ;; |
| --disable-quorum) quorum="no" |
| ;; |
| --enable-quorum) quorum="yes" |
| ;; |
| --disable-numa) numa="no" |
| ;; |
| --enable-numa) numa="yes" |
| ;; |
| --disable-tcmalloc) tcmalloc="no" |
| ;; |
| --enable-tcmalloc) tcmalloc="yes" |
| ;; |
| *) |
| echo "ERROR: unknown option $opt" |
| echo "Try '$0 --help' for more information" |
| exit 1 |
| ;; |
| esac |
| done |
| |
| if ! has $python; then |
| error_exit "Python not found. Use --python=/path/to/python" |
| fi |
| |
| # Note that if the Python conditional here evaluates True we will exit |
| # with status 1 which is a shell 'false' value. |
| if ! $python -c 'import sys; sys.exit(sys.version_info < (2,4) or sys.version_info >= (3,))'; then |
| error_exit "Cannot use '$python', Python 2.4 or later is required." \ |
| "Note that Python 3 or later is not yet supported." \ |
| "Use --python=/path/to/python to specify a supported Python." |
| fi |
| |
| # The -B switch was added in Python 2.6. |
| # If it is supplied, compiled files are not written. |
| # Use it for Python versions which support it. |
| if $python -B -c 'import sys; sys.exit(0)' 2>/dev/null; then |
| python="$python -B" |
| fi |
| |
| case "$cpu" in |
| ppc) |
| CPU_CFLAGS="-m32" |
| LDFLAGS="-m32 $LDFLAGS" |
| ;; |
| ppc64) |
| CPU_CFLAGS="-m64" |
| LDFLAGS="-m64 $LDFLAGS" |
| ;; |
| sparc) |
| LDFLAGS="-m32 $LDFLAGS" |
| CPU_CFLAGS="-m32 -mcpu=ultrasparc" |
| ;; |
| sparc64) |
| LDFLAGS="-m64 $LDFLAGS" |
| CPU_CFLAGS="-m64 -mcpu=ultrasparc" |
| ;; |
| s390) |
| CPU_CFLAGS="-m31" |
| LDFLAGS="-m31 $LDFLAGS" |
| ;; |
| s390x) |
| CPU_CFLAGS="-m64" |
| LDFLAGS="-m64 $LDFLAGS" |
| ;; |
| i386) |
| CPU_CFLAGS="-m32" |
| LDFLAGS="-m32 $LDFLAGS" |
| cc_i386='$(CC) -m32' |
| ;; |
| x86_64) |
| CPU_CFLAGS="-m64" |
| LDFLAGS="-m64 $LDFLAGS" |
| cc_i386='$(CC) -m32' |
| ;; |
| x32) |
| CPU_CFLAGS="-mx32" |
| LDFLAGS="-mx32 $LDFLAGS" |
| cc_i386='$(CC) -m32' |
| ;; |
| # No special flags required for other host CPUs |
| esac |
| |
| QEMU_CFLAGS="$CPU_CFLAGS $QEMU_CFLAGS" |
| EXTRA_CFLAGS="$CPU_CFLAGS $EXTRA_CFLAGS" |
| |
| default_target_list="" |
| |
| mak_wilds="" |
| |
| if [ "$softmmu" = "yes" ]; then |
| mak_wilds="${mak_wilds} $source_path/default-configs/*-softmmu.mak" |
| fi |
| if [ "$linux_user" = "yes" ]; then |
| mak_wilds="${mak_wilds} $source_path/default-configs/*-linux-user.mak" |
| fi |
| if [ "$bsd_user" = "yes" ]; then |
| mak_wilds="${mak_wilds} $source_path/default-configs/*-bsd-user.mak" |
| fi |
| |
| for config in $mak_wilds; do |
| default_target_list="${default_target_list} $(basename "$config" .mak)" |
| done |
| |
| if test x"$show_help" = x"yes" ; then |
| cat << EOF |
| |
| Usage: configure [options] |
| Options: [defaults in brackets after descriptions] |
| |
| Standard options: |
| --help print this message |
| --prefix=PREFIX install in PREFIX [$prefix] |
| --interp-prefix=PREFIX where to find shared libraries, etc. |
| use %M for cpu name [$interp_prefix] |
| --target-list=LIST set target list (default: build everything) |
| $(echo Available targets: $default_target_list | \ |
| fold -s -w 53 | sed -e 's/^/ /') |
| |
| Advanced options (experts only): |
| --source-path=PATH path of source code [$source_path] |
| --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix] |
| --cc=CC use C compiler CC [$cc] |
| --iasl=IASL use ACPI compiler IASL [$iasl] |
| --host-cc=CC use C compiler CC [$host_cc] for code run at |
| build time |
| --cxx=CXX use C++ compiler CXX [$cxx] |
| --objcc=OBJCC use Objective-C compiler OBJCC [$objcc] |
| --extra-cflags=CFLAGS append extra C compiler flags QEMU_CFLAGS |
| --extra-ldflags=LDFLAGS append extra linker flags LDFLAGS |
| --make=MAKE use specified make [$make] |
| --install=INSTALL use specified install [$install] |
| --python=PYTHON use specified python [$python] |
| --smbd=SMBD use specified smbd [$smbd] |
| --static enable static build [$static] |
| --mandir=PATH install man pages in PATH |
| --datadir=PATH install firmware in PATH$confsuffix |
| --docdir=PATH install documentation in PATH$confsuffix |
| --bindir=PATH install binaries in PATH |
| --libdir=PATH install libraries in PATH |
| --sysconfdir=PATH install config in PATH$confsuffix |
| --localstatedir=PATH install local state in PATH (set at runtime on win32) |
| --with-confsuffix=SUFFIX suffix for QEMU data inside datadir/libdir/sysconfdir [$confsuffix] |
| --enable-modules enable modules support |
| --enable-debug-tcg enable TCG debugging |
| --disable-debug-tcg disable TCG debugging (default) |
| --enable-debug-info enable debugging information (default) |
| --disable-debug-info disable debugging information |
| --enable-debug enable common debug build options |
| --enable-sparse enable sparse checker |
| --disable-sparse disable sparse checker (default) |
| --disable-strip disable stripping binaries |
| --disable-werror disable compilation abort on warning |
| --disable-stack-protector disable compiler-provided stack protection |
| --disable-sdl disable SDL |
| --enable-sdl enable SDL |
| --with-sdlabi select preferred SDL ABI 1.2 or 2.0 |
| --disable-gtk disable gtk UI |
| --enable-gtk enable gtk UI |
| --with-gtkabi select preferred GTK ABI 2.0 or 3.0 |
| --disable-virtfs disable VirtFS |
| --enable-virtfs enable VirtFS |
| --disable-vnc disable VNC |
| --enable-vnc enable VNC |
| --disable-cocoa disable Cocoa (Mac OS X only) |
| --enable-cocoa enable Cocoa (default on Mac OS X) |
| --audio-drv-list=LIST set audio drivers list: |
| Available drivers: $audio_possible_drivers |
| --block-drv-whitelist=L Same as --block-drv-rw-whitelist=L |
| --block-drv-rw-whitelist=L |
| set block driver read-write whitelist |
| (affects only QEMU, not qemu-img) |
| --block-drv-ro-whitelist=L |
| set block driver read-only whitelist |
| (affects only QEMU, not qemu-img) |
| --disable-xen disable xen backend driver support |
| --enable-xen enable xen backend driver support |
| --disable-xen-pci-passthrough |
| --enable-xen-pci-passthrough |
| --disable-brlapi disable BrlAPI |
| --enable-brlapi enable BrlAPI |
| --disable-vnc-tls disable TLS encryption for VNC server |
| --enable-vnc-tls enable TLS encryption for VNC server |
| --disable-vnc-sasl disable SASL encryption for VNC server |
| --enable-vnc-sasl enable SASL encryption for VNC server |
| --disable-vnc-jpeg disable JPEG lossy compression for VNC server |
| --enable-vnc-jpeg enable JPEG lossy compression for VNC server |
| --disable-vnc-png disable PNG compression for VNC server (default) |
| --enable-vnc-png enable PNG compression for VNC server |
| --disable-vnc-ws disable Websockets support for VNC server |
| --enable-vnc-ws enable Websockets support for VNC server |
| --disable-curses disable curses output |
| --enable-curses enable curses output |
| --disable-curl disable curl connectivity |
| --enable-curl enable curl connectivity |
| --disable-fdt disable fdt device tree |
| --enable-fdt enable fdt device tree |
| --disable-bluez disable bluez stack connectivity |
| --enable-bluez enable bluez stack connectivity |
| --disable-slirp disable SLIRP userspace network connectivity |
| --disable-kvm disable KVM acceleration support |
| --enable-kvm enable KVM acceleration support |
| --disable-rdma disable RDMA-based migration support |
| --enable-rdma enable RDMA-based migration support |
| --enable-tcg-interpreter enable TCG with bytecode interpreter (TCI) |
| --enable-system enable all system emulation targets |
| --disable-system disable all system emulation targets |
| --enable-user enable supported user emulation targets |
| --disable-user disable all user emulation targets |
| --enable-linux-user enable all linux usermode emulation targets |
| --disable-linux-user disable all linux usermode emulation targets |
| --enable-bsd-user enable all BSD usermode emulation targets |
| --disable-bsd-user disable all BSD usermode emulation targets |
| --enable-guest-base enable GUEST_BASE support for usermode |
| emulation targets |
| --disable-guest-base disable GUEST_BASE support |
| --enable-pie build Position Independent Executables |
| --disable-pie do not build Position Independent Executables |
| --fmod-lib path to FMOD library |
| --fmod-inc path to FMOD includes |
| --oss-lib path to OSS library |
| --cpu=CPU Build for host CPU [$cpu] |
| --disable-uuid disable uuid support |
| --enable-uuid enable uuid support |
| --disable-vde disable support for vde network |
| --enable-vde enable support for vde network |
| --disable-netmap disable support for netmap network |
| --enable-netmap enable support for netmap network |
| --disable-linux-aio disable Linux AIO support |
| --enable-linux-aio enable Linux AIO support |
| --disable-cap-ng disable libcap-ng support |
| --enable-cap-ng enable libcap-ng support |
| --disable-attr disable attr and xattr support |
| --enable-attr enable attr and xattr support |
| --disable-blobs disable installing provided firmware blobs |
| --enable-docs enable documentation build |
| --disable-docs disable documentation build |
| --disable-vhost-net disable vhost-net acceleration support |
| --enable-vhost-net enable vhost-net acceleration support |
| --enable-trace-backends=B Set trace backend |
| Available backends: $($python $source_path/scripts/tracetool.py --list-backends) |
| --with-trace-file=NAME Full PATH,NAME of file to store traces |
| Default:trace-<pid> |
| --disable-spice disable spice |
| --enable-spice enable spice |
| --enable-rbd enable building the rados block device (rbd) |
| --disable-libiscsi disable iscsi support |
| --enable-libiscsi enable iscsi support |
| --disable-libnfs disable nfs support |
| --enable-libnfs enable nfs support |
| --disable-smartcard-nss disable smartcard nss support |
| --enable-smartcard-nss enable smartcard nss support |
| --disable-libusb disable libusb (for usb passthrough) |
| --enable-libusb enable libusb (for usb passthrough) |
| --disable-usb-redir disable usb network redirection support |
| --enable-usb-redir enable usb network redirection support |
| --enable-lzo enable the support of lzo compression library |
| --enable-snappy enable the support of snappy compression library |
| --enable-bzip2 enable the support of bzip2 compression library (for |
| reading bzip2-compressed dmg images) |
| --disable-guest-agent disable building of the QEMU Guest Agent |
| --enable-guest-agent enable building of the QEMU Guest Agent |
| --with-vss-sdk=SDK-path enable Windows VSS support in QEMU Guest Agent |
| --with-win-sdk=SDK-path path to Windows Platform SDK (to build VSS .tlb) |
| --disable-seccomp disable seccomp support |
| --enable-seccomp enable seccomp support |
| --with-coroutine=BACKEND coroutine backend. Supported options: |
| gthread, ucontext, sigaltstack, windows |
| --disable-coroutine-pool disable coroutine freelist (worse performance) |
| --enable-coroutine-pool enable coroutine freelist (better performance) |
| --enable-glusterfs enable GlusterFS backend |
| --disable-glusterfs disable GlusterFS backend |
| --enable-archipelago enable Archipelago backend |
| --disable-archipelago disable Archipelago backend |
| --enable-gcov enable test coverage analysis with gcov |
| --gcov=GCOV use specified gcov [$gcov_tool] |
| --disable-tpm disable TPM support |
| --enable-tpm enable TPM support |
| --disable-libssh2 disable ssh block device support |
| --enable-libssh2 enable ssh block device support |
| --disable-vhdx disable support for the Microsoft VHDX image format |
| --enable-vhdx enable support for the Microsoft VHDX image format |
| --disable-quorum disable quorum block filter support |
| --enable-quorum enable quorum block filter support |
| --disable-numa disable libnuma support |
| --enable-numa enable libnuma support |
| --disable-tcmalloc disable tcmalloc support |
| --enable-tcmalloc enable tcmalloc support |
| |
| NOTE: The object files are built at the place where configure is launched |
| EOF |
| exit 0 |
| fi |
| |
| # Now we have handled --enable-tcg-interpreter and know we're not just |
| # printing the help message, bail out if the host CPU isn't supported. |
| if test "$ARCH" = "unknown"; then |
| if test "$tcg_interpreter" = "yes" ; then |
| echo "Unsupported CPU = $cpu, will use TCG with TCI (experimental)" |
| ARCH=tci |
| else |
| error_exit "Unsupported CPU = $cpu, try --enable-tcg-interpreter" |
| fi |
| fi |
| |
| # Consult white-list to determine whether to enable werror |
| # by default. Only enable by default for git builds |
| z_version=`cut -f3 -d. $source_path/VERSION` |
| |
| if test -z "$werror" ; then |
| if test -d "$source_path/.git" -a \ |
| "$linux" = "yes" ; then |
| werror="yes" |
| else |
| werror="no" |
| fi |
| fi |
| |
| # check that the C compiler works. |
| cat > $TMPC <<EOF |
| int main(void) { return 0; } |
| EOF |
| |
| if compile_object ; then |
| : C compiler works ok |
| else |
| error_exit "\"$cc\" either does not exist or does not work" |
| fi |
| |
| # Check that the C++ compiler exists and works with the C compiler |
| if has $cxx; then |
| cat > $TMPC <<EOF |
| int c_function(void); |
| int main(void) { return c_function(); } |
| EOF |
| |
| compile_object |
| |
| cat > $TMPCXX <<EOF |
| extern "C" { |
| int c_function(void); |
| } |
| int c_function(void) { return 42; } |
| EOF |
| |
| update_cxxflags |
| |
| if do_cxx $QEMU_CXXFLAGS -o $TMPE $TMPCXX $TMPO $LDFLAGS; then |
| # C++ compiler $cxx works ok with C compiler $cc |
| : |
| else |
| echo "C++ compiler $cxx does not work with C compiler $cc" |
| echo "Disabling C++ specific optional code" |
| cxx= |
| fi |
| else |
| echo "No C++ compiler available; disabling C++ specific optional code" |
| cxx= |
| fi |
| |
| gcc_flags="-Wold-style-declaration -Wold-style-definition -Wtype-limits" |
| gcc_flags="-Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers $gcc_flags" |
| gcc_flags="-Wmissing-include-dirs -Wempty-body -Wnested-externs $gcc_flags" |
| gcc_flags="-Wendif-labels $gcc_flags" |
| gcc_flags="-Wno-initializer-overrides $gcc_flags" |
| gcc_flags="-Wno-string-plus-int $gcc_flags" |
| # Note that we do not add -Werror to gcc_flags here, because that would |
| # enable it for all configure tests. If a configure test failed due |
| # to -Werror this would just silently disable some features, |
| # so it's too error prone. |
| cat > $TMPC << EOF |
| int main(void) { return 0; } |
| EOF |
| for flag in $gcc_flags; do |
| # Use the positive sense of the flag when testing for -Wno-wombat |
| # support (gcc will happily accept the -Wno- form of unknown |
| # warning options). |
| optflag="$(echo $flag | sed -e 's/^-Wno-/-W/')" |
| if compile_prog "-Werror $optflag" "" ; then |
| QEMU_CFLAGS="$QEMU_CFLAGS $flag" |
| fi |
| done |
| |
| if test "$stack_protector" != "no"; then |
| gcc_flags="-fstack-protector-strong -fstack-protector-all" |
| sp_on=0 |
| for flag in $gcc_flags; do |
| # We need to check both a compile and a link, since some compiler |
| # setups fail only on a .c->.o compile and some only at link time |
| if do_cc $QEMU_CFLAGS -Werror $flag -c -o $TMPO $TMPC && |
| compile_prog "-Werror $flag" ""; then |
| QEMU_CFLAGS="$QEMU_CFLAGS $flag" |
| LIBTOOLFLAGS="$LIBTOOLFLAGS -Wc,$flag" |
| sp_on=1 |
| break |
| fi |
| done |
| if test "$stack_protector" = yes; then |
| if test $sp_on = 0; then |
| error_exit "Stack protector not supported" |
| fi |
| fi |
| fi |
| |
| # Workaround for http://gcc.gnu.org/PR55489. Happens with -fPIE/-fPIC and |
| # large functions that use global variables. The bug is in all releases of |
| # GCC, but it became particularly acute in 4.6.x and 4.7.x. It is fixed in |
| # 4.7.3 and 4.8.0. We should be able to delete this at the end of 2013. |
| cat > $TMPC << EOF |
| #if __GNUC__ == 4 && (__GNUC_MINOR__ == 6 || (__GNUC_MINOR__ == 7 && __GNUC_PATCHLEVEL__ <= 2)) |
| int main(void) { return 0; } |
| #else |
| #error No bug in this compiler. |
| #endif |
| EOF |
| if compile_prog "-Werror -fno-gcse" "" ; then |
| TRANSLATE_OPT_CFLAGS=-fno-gcse |
| fi |
| |
| if test "$static" = "yes" ; then |
| if test "$modules" = "yes" ; then |
| error_exit "static and modules are mutually incompatible" |
| fi |
| if test "$pie" = "yes" ; then |
| error_exit "static and pie are mutually incompatible" |
| else |
| pie="no" |
| fi |
| fi |
| |
| if test "$pie" = ""; then |
| case "$cpu-$targetos" in |
| i386-Linux|x86_64-Linux|x32-Linux|i386-OpenBSD|x86_64-OpenBSD) |
| ;; |
| *) |
| pie="no" |
| ;; |
| esac |
| fi |
| |
| if test "$pie" != "no" ; then |
| cat > $TMPC << EOF |
| |
| #ifdef __linux__ |
| # define THREAD __thread |
| #else |
| # define THREAD |
| #endif |
| |
| static THREAD int tls_var; |
| |
| int main(void) { return tls_var; } |
| |
| EOF |
| if compile_prog "-fPIE -DPIE" "-pie"; then |
| QEMU_CFLAGS="-fPIE -DPIE $QEMU_CFLAGS" |
| LDFLAGS="-pie $LDFLAGS" |
| pie="yes" |
| if compile_prog "" "-Wl,-z,relro -Wl,-z,now" ; then |
| LDFLAGS="-Wl,-z,relro -Wl,-z,now $LDFLAGS" |
| fi |
| else |
| if test "$pie" = "yes"; then |
| error_exit "PIE not available due to missing toolchain support" |
| else |
| echo "Disabling PIE due to missing toolchain support" |
| pie="no" |
| fi |
| fi |
| |
| if compile_prog "-fno-pie" "-nopie"; then |
| CFLAGS_NOPIE="-fno-pie" |
| LDFLAGS_NOPIE="-nopie" |
| fi |
| fi |
| |
| # check for broken gcc and libtool in RHEL5 |
| if test -n "$libtool" -a "$pie" != "no" ; then |
| cat > $TMPC <<EOF |
| |
| void *f(unsigned char *buf, int len); |
| void *g(unsigned char *buf, int len); |
| |
| void * |
| f(unsigned char *buf, int len) |
| { |
| return (void*)0L; |
| } |
| |
| void * |
| g(unsigned char *buf, int len) |
| { |
| return f(buf, len); |
| } |
| |
| EOF |
| if ! libtool_prog; then |
| echo "Disabling libtool due to broken toolchain support" |
| libtool= |
| fi |
| fi |
| |
| ########################################## |
| # __sync_fetch_and_and requires at least -march=i486. Many toolchains |
| # use i686 as default anyway, but for those that don't, an explicit |
| # specification is necessary |
| |
| if test "$cpu" = "i386"; then |
| cat > $TMPC << EOF |
| static int sfaa(int *ptr) |
| { |
| return __sync_fetch_and_and(ptr, 0); |
| } |
| |
| int main(void) |
| { |
| int val = 42; |
| val = __sync_val_compare_and_swap(&val, 0, 1); |
| sfaa(&val); |
| return val; |
| } |
| EOF |
| if ! compile_prog "" "" ; then |
| QEMU_CFLAGS="-march=i486 $QEMU_CFLAGS" |
| fi |
| fi |
| |
| ######################################### |
| # Solaris specific configure tool chain decisions |
| |
| if test "$solaris" = "yes" ; then |
| if has $install; then |
| : |
| else |
| error_exit "Solaris install program not found. Use --install=/usr/ucb/install or" \ |
| "install fileutils from www.blastwave.org using pkg-get -i fileutils" \ |
| "to get ginstall which is used by default (which lives in /opt/csw/bin)" |
| fi |
| if test "`path_of $install`" = "/usr/sbin/install" ; then |
| error_exit "Solaris /usr/sbin/install is not an appropriate install program." \ |
| "try ginstall from the GNU fileutils available from www.blastwave.org" \ |
| "using pkg-get -i fileutils, or use --install=/usr/ucb/install" |
| fi |
| if has ar; then |
| : |
| else |
| if test -f /usr/ccs/bin/ar ; then |
| error_exit "No path includes ar" \ |
| "Add /usr/ccs/bin to your path and rerun configure" |
| fi |
| error_exit "No path includes ar" |
| fi |
| fi |
| |
| if test -z "${target_list+xxx}" ; then |
| target_list="$default_target_list" |
| else |
| target_list=`echo "$target_list" | sed -e 's/,/ /g'` |
| fi |
| |
| # Check that we recognised the target name; this allows a more |
| # friendly error message than if we let it fall through. |
| for target in $target_list; do |
| case " $default_target_list " in |
| *" $target "*) |
| ;; |
| *) |
| error_exit "Unknown target name '$target'" |
| ;; |
| esac |
| done |
| |
| # see if system emulation was really requested |
| case " $target_list " in |
| *"-softmmu "*) softmmu=yes |
| ;; |
| *) softmmu=no |
| ;; |
| esac |
| |
| feature_not_found() { |
| feature=$1 |
| remedy=$2 |
| |
| error_exit "User requested feature $feature" \ |
| "configure was not able to find it." \ |
| "$remedy" |
| } |
| |
| # --- |
| # big/little endian test |
| cat > $TMPC << EOF |
| short big_endian[] = { 0x4269, 0x4765, 0x4e64, 0x4961, 0x4e00, 0, }; |
| short little_endian[] = { 0x694c, 0x7454, 0x654c, 0x6e45, 0x6944, 0x6e41, 0, }; |
| extern int foo(short *, short *); |
| int main(int argc, char *argv[]) { |
| return foo(big_endian, little_endian); |
| } |
| EOF |
| |
| if compile_object ; then |
| if grep -q BiGeNdIaN $TMPO ; then |
| bigendian="yes" |
| elif grep -q LiTtLeEnDiAn $TMPO ; then |
| bigendian="no" |
| else |
| echo big/little test failed |
| fi |
| else |
| echo big/little test failed |
| fi |
| |
| ########################################## |
| # L2TPV3 probe |
| |
| cat > $TMPC <<EOF |
| #include <sys/socket.h> |
| #include <linux/ip.h> |
| int main(void) { return sizeof(struct mmsghdr); } |
| EOF |
| if compile_prog "" "" ; then |
| l2tpv3=yes |
| else |
| l2tpv3=no |
| fi |
| |
| ########################################## |
| # pkg-config probe |
| |
| if ! has "$pkg_config_exe"; then |
| error_exit "pkg-config binary '$pkg_config_exe' not found" |
| fi |
| |
| ########################################## |
| # NPTL probe |
| |
| if test "$linux_user" = "yes"; then |
| cat > $TMPC <<EOF |
| #include <sched.h> |
| #include <linux/futex.h> |
| int main(void) { |
| #if !defined(CLONE_SETTLS) || !defined(FUTEX_WAIT) |
| #error bork |
| #endif |
| return 0; |
| } |
| EOF |
| if ! compile_object ; then |
| feature_not_found "nptl" "Install glibc and linux kernel headers." |
| fi |
| fi |
| |
| ########################################## |
| # zlib check |
| |
| if test "$zlib" != "no" ; then |
| cat > $TMPC << EOF |
| #include <zlib.h> |
| int main(void) { zlibVersion(); return 0; } |
| EOF |
| if compile_prog "" "-lz" ; then |
| : |
| else |
| error_exit "zlib check failed" \ |
| "Make sure to have the zlib libs and headers installed." |
| fi |
| fi |
| LIBS="$LIBS -lz" |
| |
| ########################################## |
| # lzo check |
| |
| if test "$lzo" != "no" ; then |
| cat > $TMPC << EOF |
| #include <lzo/lzo1x.h> |
| int main(void) { lzo_version(); return 0; } |
| EOF |
| if compile_prog "" "-llzo2" ; then |
| libs_softmmu="$libs_softmmu -llzo2" |
| lzo="yes" |
| else |
| if test "$lzo" = "yes"; then |
| feature_not_found "liblzo2" "Install liblzo2 devel" |
| fi |
| lzo="no" |
| fi |
| fi |
| |
| ########################################## |
| # snappy check |
| |
| if test "$snappy" != "no" ; then |
| cat > $TMPC << EOF |
| #include <snappy-c.h> |
| int main(void) { snappy_max_compressed_length(4096); return 0; } |
| EOF |
| if compile_prog "" "-lsnappy" ; then |
| libs_softmmu="$libs_softmmu -lsnappy" |
| snappy="yes" |
| else |
| if test "$snappy" = "yes"; then |
| feature_not_found "libsnappy" "Install libsnappy devel" |
| fi |
| snappy="no" |
| fi |
| fi |
| |
| ########################################## |
| # bzip2 check |
| |
| if test "$bzip2" != "no" ; then |
| cat > $TMPC << EOF |
| #include <bzlib.h> |
| int main(void) { BZ2_bzlibVersion(); return 0; } |
| EOF |
| if compile_prog "" "-lbz2" ; then |
| bzip2="yes" |
| else |
| if test "$bzip2" = "yes"; then |
| feature_not_found "libbzip2" "Install libbzip2 devel" |
| fi |
| bzip2="no" |
| fi |
| fi |
| |
| ########################################## |
| # libseccomp check |
| |
| if test "$seccomp" != "no" ; then |
| if test "$cpu" = "i386" || test "$cpu" = "x86_64" && |
| $pkg_config --atleast-version=2.1.1 libseccomp; then |
| libs_softmmu="$libs_softmmu `$pkg_config --libs libseccomp`" |
| QEMU_CFLAGS="$QEMU_CFLAGS `$pkg_config --cflags libseccomp`" |
| seccomp="yes" |
| else |
| if test "$seccomp" = "yes"; then |
| feature_not_found "libseccomp" "Install libseccomp devel >= 2.1.1" |
| fi |
| seccomp="no" |
| fi |
| fi |
| ########################################## |
| # xen probe |
| |
| if test "$xen" != "no" ; then |
| xen_libs="-lxenstore -lxenctrl -lxenguest" |
| |
| # First we test whether Xen headers and libraries are available. |
| # If no, we are done and there is no Xen support. |
| # If yes, more tests are run to detect the Xen version. |
| |
| # Xen (any) |
| cat > $TMPC <<EOF |
| #include <xenctrl.h> |
| int main(void) { |
| return 0; |
| } |
| EOF |
| if ! compile_prog "" "$xen_libs" ; then |
| # Xen not found |
| if test "$xen" = "yes" ; then |
| feature_not_found "xen" "Install xen devel" |
| fi |
| xen=no |
| |
| # Xen unstable |
| elif |
| cat > $TMPC <<EOF && |
| #include <xenctrl.h> |
| #include <xenstore.h> |
| #include <stdint.h> |
| #include <xen/hvm/hvm_info_table.h> |
| #if !defined(HVM_MAX_VCPUS) |
| # error HVM_MAX_VCPUS not defined |
| #endif |
| int main(void) { |
| xc_interface *xc; |
| xs_daemon_open(); |
| xc = xc_interface_open(0, 0, 0); |
| xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0); |
| xc_gnttab_open(NULL, 0); |
| xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0); |
| xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000); |
| xc_hvm_create_ioreq_server(xc, 0, 0, NULL); |
| return 0; |
| } |
| EOF |
| compile_prog "" "$xen_libs" |
| then |
| xen_ctrl_version=450 |
| xen=yes |
| |
| elif |
| cat > $TMPC <<EOF && |
| #include <xenctrl.h> |
| #include <xenstore.h> |
| #include <stdint.h> |
| #include <xen/hvm/hvm_info_table.h> |
| #if !defined(HVM_MAX_VCPUS) |
| # error HVM_MAX_VCPUS not defined |
| #endif |
| int main(void) { |
| xc_interface *xc; |
| xs_daemon_open(); |
| xc = xc_interface_open(0, 0, 0); |
| xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0); |
| xc_gnttab_open(NULL, 0); |
| xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0); |
| xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000); |
| return 0; |
| } |
| EOF |
| compile_prog "" "$xen_libs" |
| then |
| xen_ctrl_version=420 |
| xen=yes |
| |
| elif |
| cat > $TMPC <<EOF && |
| #include <xenctrl.h> |
| #include <xs.h> |
| #include <stdint.h> |
| #include <xen/hvm/hvm_info_table.h> |
| #if !defined(HVM_MAX_VCPUS) |
| # error HVM_MAX_VCPUS not defined |
| #endif |
| int main(void) { |
| xs_daemon_open(); |
| xc_interface_open(0, 0, 0); |
| xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0); |
| xc_gnttab_open(NULL, 0); |
| xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0); |
| return 0; |
| } |
| EOF |
| compile_prog "" "$xen_libs" |
| then |
| xen_ctrl_version=410 |
| xen=yes |
| |
| # Xen 4.0.0 |
| elif |
| cat > $TMPC <<EOF && |
| #include <xenctrl.h> |
| #include <xs.h> |
| #include <stdint.h> |
| #include <xen/hvm/hvm_info_table.h> |
| #if !defined(HVM_MAX_VCPUS) |
| # error HVM_MAX_VCPUS not defined |
| #endif |
| int main(void) { |
| struct xen_add_to_physmap xatp = { |
| .domid = 0, .space = XENMAPSPACE_gmfn, .idx = 0, .gpfn = 0, |
| }; |
| xs_daemon_open(); |
| xc_interface_open(); |
| xc_gnttab_open(); |
| xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0); |
| xc_memory_op(0, XENMEM_add_to_physmap, &xatp); |
| return 0; |
| } |
| EOF |
| compile_prog "" "$xen_libs" |
| then |
| xen_ctrl_version=400 |
| xen=yes |
| |
| # Xen 3.4.0 |
| elif |
| cat > $TMPC <<EOF && |
| #include <xenctrl.h> |
| #include <xs.h> |
| int main(void) { |
| struct xen_add_to_physmap xatp = { |
| .domid = 0, .space = XENMAPSPACE_gmfn, .idx = 0, .gpfn = 0, |
| }; |
| xs_daemon_open(); |
| xc_interface_open(); |
| xc_gnttab_open(); |
| xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0); |
| xc_memory_op(0, XENMEM_add_to_physmap, &xatp); |
| return 0; |
| } |
| EOF |
| compile_prog "" "$xen_libs" |
| then |
| xen_ctrl_version=340 |
| xen=yes |
| |
| # Xen 3.3.0 |
| elif |
| cat > $TMPC <<EOF && |
| #include <xenctrl.h> |
| #include <xs.h> |
| int main(void) { |
| xs_daemon_open(); |
| xc_interface_open(); |
| xc_gnttab_open(); |
| xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0); |
| return 0; |
| } |
| EOF |
| compile_prog "" "$xen_libs" |
| then |
| xen_ctrl_version=330 |
| xen=yes |
| |
| # Xen version unsupported |
| else |
| if test "$xen" = "yes" ; then |
| feature_not_found "xen (unsupported version)" "Install supported xen (e.g. 4.0, 3.4, 3.3)" |
| fi |
| xen=no |
| fi |
| |
| if test "$xen" = yes; then |
| libs_softmmu="$xen_libs $libs_softmmu" |
| fi |
| fi |
| |
| if test "$xen_pci_passthrough" != "no"; then |
| if test "$xen" = "yes" && test "$linux" = "yes" && |
| test "$xen_ctrl_version" -ge 340; then |
| xen_pci_passthrough=yes |
| else |
| if test "$xen_pci_passthrough" = "yes"; then |
| if test "$xen_ctrl_version" -lt 340; then |
| error_exit "User requested feature Xen PCI Passthrough" \ |
| "This feature does not work with Xen 3.3" |
| fi |
| error_exit "User requested feature Xen PCI Passthrough" \ |
| " but this feature requires /sys from Linux" |
| fi |
| xen_pci_passthrough=no |
| fi |
| fi |
| |
| ########################################## |
| # libtool probe |
| |
| if ! has $libtool; then |
| libtool= |
| fi |
| |
| # MacOSX ships with a libtool which isn't the GNU one; weed this |
| # out by checking whether libtool supports the --version switch |
| if test -n "$libtool"; then |
| if ! "$libtool" --version >/dev/null 2>&1; then |
| libtool= |
| fi |
| fi |
| |
| ########################################## |
| # Sparse probe |
| if test "$sparse" != "no" ; then |
| if has cgcc; then |
| sparse=yes |
| else |
| if test "$sparse" = "yes" ; then |
| feature_not_found "sparse" "Install sparse binary" |
| fi |
| sparse=no |
| fi |
| fi |
| |
| ########################################## |
| # X11 probe |
| x11_cflags= |
| x11_libs=-lX11 |
| if $pkg_config --exists "x11"; then |
| x11_cflags=`$pkg_config --cflags x11` |
| x11_libs=`$pkg_config --libs x11` |
| fi |
| |
| ########################################## |
| # GTK probe |
| |
| if test "$gtkabi" = ""; then |
| # The GTK ABI was not specified explicitly, so try whether 2.0 is available. |
| # Use 3.0 as a fallback if that is available. |
| if $pkg_config --exists "gtk+-2.0 >= 2.18.0"; then |
| gtkabi=2.0 |
| elif $pkg_config --exists "gtk+-3.0 >= 3.0.0"; then |
| gtkabi=3.0 |
| else |
| gtkabi=2.0 |
| fi |
| fi |
| |
| if test "$gtk" != "no"; then |
| gtkpackage="gtk+-$gtkabi" |
| gtkx11package="gtk+-x11-$gtkabi" |
| if test "$gtkabi" = "3.0" ; then |
| gtkversion="3.0.0" |
| else |
| gtkversion="2.18.0" |
| fi |
| if $pkg_config --exists "$gtkpackage >= $gtkversion"; then |
| gtk_cflags=`$pkg_config --cflags $gtkpackage` |
| gtk_libs=`$pkg_config --libs $gtkpackage` |
| if $pkg_config --exists "$gtkx11package >= $gtkversion"; then |
| gtk_cflags="$gtk_cflags $x11_cflags" |
| gtk_libs="$gtk_libs $x11_libs" |
| fi |
| libs_softmmu="$gtk_libs $libs_softmmu" |
| gtk="yes" |
| elif test "$gtk" = "yes"; then |
| feature_not_found "gtk" "Install gtk2 or gtk3 devel" |
| else |
| gtk="no" |
| fi |
| fi |
| |
| ########################################## |
| # VTE probe |
| |
| if test "$vte" != "no"; then |
| if test "$gtkabi" = "3.0"; then |
| vtepackage="vte-2.90" |
| vteversion="0.32.0" |
| else |
| vtepackage="vte" |
| vteversion="0.24.0" |
| fi |
| if $pkg_config --exists "$vtepackage >= $vteversion"; then |
| vte_cflags=`$pkg_config --cflags $vtepackage` |
| vte_libs=`$pkg_config --libs $vtepackage` |
| libs_softmmu="$vte_libs $libs_softmmu" |
| vte="yes" |
| elif test "$vte" = "yes"; then |
| if test "$gtkabi" = "3.0"; then |
| feature_not_found "vte" "Install libvte-2.90 devel" |
| else |
| feature_not_found "vte" "Install libvte devel" |
| fi |
| else |
| vte="no" |
| fi |
| fi |
| |
| ########################################## |
| # SDL probe |
| |
| # Look for sdl configuration program (pkg-config or sdl-config). Try |
| # sdl-config even without cross prefix, and favour pkg-config over sdl-config. |
| |
| if test $sdlabi = "2.0"; then |
| sdl_config=$sdl2_config |
| sdlname=sdl2 |
| sdlconfigname=sdl2_config |
| else |
| sdlname=sdl |
| sdlconfigname=sdl_config |
| fi |
| |
| if test "`basename $sdl_config`" != $sdlconfigname && ! has ${sdl_config}; then |
| sdl_config=$sdlconfigname |
| fi |
| |
| if $pkg_config $sdlname --exists; then |
| sdlconfig="$pkg_config $sdlname" |
| _sdlversion=`$sdlconfig --modversion 2>/dev/null | sed 's/[^0-9]//g'` |
| elif has ${sdl_config}; then |
| sdlconfig="$sdl_config" |
| _sdlversion=`$sdlconfig --version | sed 's/[^0-9]//g'` |
| else |
| if test "$sdl" = "yes" ; then |
| feature_not_found "sdl" "Install SDL devel" |
| fi |
| sdl=no |
| fi |
| if test -n "$cross_prefix" && test "$(basename "$sdlconfig")" = sdl-config; then |
| echo warning: using "\"$sdlconfig\"" to detect cross-compiled sdl >&2 |
| fi |
| |
| sdl_too_old=no |
| if test "$sdl" != "no" ; then |
| cat > $TMPC << EOF |
| #include <SDL.h> |
| #undef main /* We don't want SDL to override our main() */ |
| int main( void ) { return SDL_Init (SDL_INIT_VIDEO); } |
| EOF |
| sdl_cflags=`$sdlconfig --cflags 2> /dev/null` |
| if test "$static" = "yes" ; then |
| sdl_libs=`$sdlconfig --static-libs 2>/dev/null` |
| else |
| sdl_libs=`$sdlconfig --libs 2> /dev/null` |
| fi |
| if compile_prog "$sdl_cflags" "$sdl_libs" ; then |
| if test "$_sdlversion" -lt 121 ; then |
| sdl_too_old=yes |
| else |
| if test "$cocoa" = "no" ; then |
| sdl=yes |
| fi |
| fi |
| |
| # static link with sdl ? (note: sdl.pc's --static --libs is broken) |
| if test "$sdl" = "yes" -a "$static" = "yes" ; then |
| if test $? = 0 && echo $sdl_libs | grep -- -laa > /dev/null; then |
| sdl_libs="$sdl_libs `aalib-config --static-libs 2>/dev/null`" |
| sdl_cflags="$sdl_cflags `aalib-config --cflags 2>/dev/null`" |
| fi |
| if compile_prog "$sdl_cflags" "$sdl_libs" ; then |
| : |
| else |
| sdl=no |
| fi |
| fi # static link |
| else # sdl not found |
| if test "$sdl" = "yes" ; then |
| feature_not_found "sdl" "Install SDL devel" |
| fi |
| sdl=no |
| fi # sdl compile test |
| fi |
| |
| if test "$sdl" = "yes" ; then |
| cat > $TMPC <<EOF |
| #include <SDL.h> |
| #if defined(SDL_VIDEO_DRIVER_X11) |
| #include <X11/XKBlib.h> |
| #else |
| #error No x11 support |
| #endif |
| int main(void) { return 0; } |
| EOF |
| if compile_prog "$sdl_cflags $x11_cflags" "$sdl_libs $x11_libs" ; then |
| sdl_cflags="$sdl_cflags $x11_cflags" |
| sdl_libs="$sdl_libs $x11_libs" |
| fi |
| libs_softmmu="$sdl_libs $libs_softmmu" |
| fi |
| |
| ########################################## |
| # RDMA needs OpenFabrics libraries |
| if test "$rdma" != "no" ; then |
| cat > $TMPC <<EOF |
| #include <rdma/rdma_cma.h> |
| int main(void) { return 0; } |
| EOF |
| rdma_libs="-lrdmacm -libverbs" |
| if compile_prog "" "$rdma_libs" ; then |
| rdma="yes" |
| libs_softmmu="$libs_softmmu $rdma_libs" |
| else |
| if test "$rdma" = "yes" ; then |
| error_exit \ |
| " OpenFabrics librdmacm/libibverbs not present." \ |
| " Your options:" \ |
| " (1) Fast: Install infiniband packages from your distro." \ |
| " (2) Cleanest: Install libraries from www.openfabrics.org" \ |
| " (3) Also: Install softiwarp if you don't have RDMA hardware" |
| fi |
| rdma="no" |
| fi |
| fi |
| |
| ########################################## |
| # VNC TLS/WS detection |
| if test "$vnc" = "yes" -a \( "$vnc_tls" != "no" -o "$vnc_ws" != "no" \) ; then |
| cat > $TMPC <<EOF |
| #include <gnutls/gnutls.h> |
| int main(void) { gnutls_session_t s; gnutls_init(&s, GNUTLS_SERVER); return 0; } |
| EOF |
| vnc_tls_cflags=`$pkg_config --cflags gnutls 2> /dev/null` |
| vnc_tls_libs=`$pkg_config --libs gnutls 2> /dev/null` |
| if compile_prog "$vnc_tls_cflags" "$vnc_tls_libs" ; then |
| if test "$vnc_tls" != "no" ; then |
| vnc_tls=yes |
| fi |
| if test "$vnc_ws" != "no" ; then |
| vnc_ws=yes |
| fi |
| libs_softmmu="$vnc_tls_libs $libs_softmmu" |
| QEMU_CFLAGS="$QEMU_CFLAGS $vnc_tls_cflags" |
| else |
| if test "$vnc_tls" = "yes" ; then |
| feature_not_found "vnc-tls" "Install gnutls devel" |
| fi |
| if test "$vnc_ws" = "yes" ; then |
| feature_not_found "vnc-ws" "Install gnutls devel" |
| fi |
| vnc_tls=no |
| vnc_ws=no |
| fi |
| fi |
| |
| ########################################## |
| # Quorum probe (check for gnutls) |
| if test "$quorum" != "no" ; then |
| cat > $TMPC <<EOF |
| #include <gnutls/gnutls.h> |
| #include <gnutls/crypto.h> |
| int main(void) {char data[4096], digest[32]; |
| gnutls_hash_fast(GNUTLS_DIG_SHA256, data, 4096, digest); |
| return 0; |
| } |
| EOF |
| quorum_tls_cflags=`$pkg_config --cflags gnutls 2> /dev/null` |
| quorum_tls_libs=`$pkg_config --libs gnutls 2> /dev/null` |
| if compile_prog "$quorum_tls_cflags" "$quorum_tls_libs" ; then |
| qcow_tls=yes |
| libs_softmmu="$quorum_tls_libs $libs_softmmu" |
| libs_tools="$quorum_tls_libs $libs_softmmu" |
| QEMU_CFLAGS="$QEMU_CFLAGS $quorum_tls_cflags" |
| quorum="yes" |
| else |
| if test "$quorum" = "yes"; then |
| feature_not_found "gnutls" "gnutls > 2.10.0 required to compile Quorum" |
| fi |
| quorum="no" |
| fi |
| fi |
| |
| ########################################## |
| # VNC SASL detection |
| if test "$vnc" = "yes" -a "$vnc_sasl" != "no" ; then |
| cat > $TMPC <<EOF |
| #include <sasl/sasl.h> |
| #include <stdio.h> |
| int main(void) { sasl_server_init(NULL, "qemu"); return 0; } |
| EOF |
| # Assuming Cyrus-SASL installed in /usr prefix |
| vnc_sasl_cflags="" |
| vnc_sasl_libs="-lsasl2" |
| if compile_prog "$vnc_sasl_cflags" "$vnc_sasl_libs" ; then |
| vnc_sasl=yes |
| libs_softmmu="$vnc_sasl_libs $libs_softmmu" |
| QEMU_CFLAGS="$QEMU_CFLAGS $vnc_sasl_cflags" |
| else |
| if test "$vnc_sasl" = "yes" ; then |
| feature_not_found "vnc-sasl" "Install Cyrus SASL devel" |
| fi |
| vnc_sasl=no |
| fi |
| fi |
| |
| ########################################## |
| # VNC JPEG detection |
| if test "$vnc" = "yes" -a "$vnc_jpeg" != "no" ; then |
| cat > $TMPC <<EOF |
| #include <stdio.h> |
| #include <jpeglib.h> |
| int main(void) { struct jpeg_compress_struct s; jpeg_create_compress(&s); return 0; } |
| EOF |
| vnc_jpeg_cflags="" |
| vnc_jpeg_libs="-ljpeg" |
| if compile_prog "$vnc_jpeg_cflags" "$vnc_jpeg_libs" ; then |
| vnc_jpeg=yes |
| libs_softmmu="$vnc_jpeg_libs $libs_softmmu" |
| QEMU_CFLAGS="$QEMU_CFLAGS $vnc_jpeg_cflags" |
| else |
| if test "$vnc_jpeg" = "yes" ; then |
| feature_not_found "vnc-jpeg" "Install libjpeg-turbo devel" |
| fi |
| vnc_jpeg=no |
| fi |
| fi |
| |
| ########################################## |
| # VNC PNG detection |
| if test "$vnc" = "yes" -a "$vnc_png" != "no" ; then |
| cat > $TMPC <<EOF |
| //#include <stdio.h> |
| #include <png.h> |
| #include <stddef.h> |
| int main(void) { |
| png_structp png_ptr; |
| png_ptr = png_create_write_struct(PNG_LIBPNG_VER_STRING, NULL, NULL, NULL); |
| return png_ptr != 0; |
| } |
| EOF |
| if $pkg_config libpng --exists; then |
| vnc_png_cflags=`$pkg_config libpng --cflags` |
| vnc_png_libs=`$pkg_config libpng --libs` |
| else |
| vnc_png_cflags="" |
| vnc_png_libs="-lpng" |
| fi |
| if compile_prog "$vnc_png_cflags" "$vnc_png_libs" ; then |
| vnc_png=yes |
| libs_softmmu="$vnc_png_libs $libs_softmmu" |
| QEMU_CFLAGS="$QEMU_CFLAGS $vnc_png_cflags" |
| else |
| if test "$vnc_png" = "yes" ; then |
| feature_not_found "vnc-png" "Install libpng devel" |
| fi |
| vnc_png=no |
| fi |
| fi |
| |
| ########################################## |
| # fnmatch() probe, used for ACL routines |
| fnmatch="no" |
| cat > $TMPC << EOF |
| #include <fnmatch.h> |
| int main(void) |
| { |
| fnmatch("foo", "foo", 0); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| fnmatch="yes" |
| fi |
| |
| ########################################## |
| # uuid_generate() probe, used for vdi block driver |
| # Note that on some systems (notably MacOSX) no extra library |
| # need be linked to get the uuid functions. |
| if test "$uuid" != "no" ; then |
| uuid_libs="-luuid" |
| cat > $TMPC << EOF |
| #include <uuid/uuid.h> |
| int main(void) |
| { |
| uuid_t my_uuid; |
| uuid_generate(my_uuid); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| uuid="yes" |
| elif compile_prog "" "$uuid_libs" ; then |
| uuid="yes" |
| libs_softmmu="$uuid_libs $libs_softmmu" |
| libs_tools="$uuid_libs $libs_tools" |
| else |
| if test "$uuid" = "yes" ; then |
| feature_not_found "uuid" "Install libuuid devel" |
| fi |
| uuid=no |
| fi |
| fi |
| |
| if test "$vhdx" = "yes" ; then |
| if test "$uuid" = "no" ; then |
| error_exit "uuid required for VHDX support" |
| fi |
| elif test "$vhdx" != "no" ; then |
| if test "$uuid" = "yes" ; then |
| vhdx=yes |
| else |
| vhdx=no |
| fi |
| fi |
| |
| ########################################## |
| # xfsctl() probe, used for raw-posix |
| if test "$xfs" != "no" ; then |
| cat > $TMPC << EOF |
| #include <stddef.h> /* NULL */ |
| #include <xfs/xfs.h> |
| int main(void) |
| { |
| xfsctl(NULL, 0, 0, NULL); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| xfs="yes" |
| else |
| if test "$xfs" = "yes" ; then |
| feature_not_found "xfs" "Instal xfsprogs/xfslibs devel" |
| fi |
| xfs=no |
| fi |
| fi |
| |
| ########################################## |
| # vde libraries probe |
| if test "$vde" != "no" ; then |
| vde_libs="-lvdeplug" |
| cat > $TMPC << EOF |
| #include <libvdeplug.h> |
| int main(void) |
| { |
| struct vde_open_args a = {0, 0, 0}; |
| char s[] = ""; |
| vde_open(s, s, &a); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "$vde_libs" ; then |
| vde=yes |
| libs_softmmu="$vde_libs $libs_softmmu" |
| libs_tools="$vde_libs $libs_tools" |
| else |
| if test "$vde" = "yes" ; then |
| feature_not_found "vde" "Install vde (Virtual Distributed Ethernet) devel" |
| fi |
| vde=no |
| fi |
| fi |
| |
| ########################################## |
| # netmap support probe |
| # Apart from looking for netmap headers, we make sure that the host API version |
| # supports the netmap backend (>=11). The upper bound (15) is meant to simulate |
| # a minor/major version number. Minor new features will be marked with values up |
| # to 15, and if something happens that requires a change to the backend we will |
| # move above 15, submit the backend fixes and modify this two bounds. |
| if test "$netmap" != "no" ; then |
| cat > $TMPC << EOF |
| #include <inttypes.h> |
| #include <net/if.h> |
| #include <net/netmap.h> |
| #include <net/netmap_user.h> |
| #if (NETMAP_API < 11) || (NETMAP_API > 15) |
| #error |
| #endif |
| int main(void) { return 0; } |
| EOF |
| if compile_prog "" "" ; then |
| netmap=yes |
| else |
| if test "$netmap" = "yes" ; then |
| feature_not_found "netmap" |
| fi |
| netmap=no |
| fi |
| fi |
| |
| ########################################## |
| # libcap-ng library probe |
| if test "$cap_ng" != "no" ; then |
| cap_libs="-lcap-ng" |
| cat > $TMPC << EOF |
| #include <cap-ng.h> |
| int main(void) |
| { |
| capng_capability_to_name(CAPNG_EFFECTIVE); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "$cap_libs" ; then |
| cap_ng=yes |
| libs_tools="$cap_libs $libs_tools" |
| else |
| if test "$cap_ng" = "yes" ; then |
| feature_not_found "cap_ng" "Install libcap-ng devel" |
| fi |
| cap_ng=no |
| fi |
| fi |
| |
| ########################################## |
| # Sound support libraries probe |
| |
| audio_drv_probe() |
| { |
| drv=$1 |
| hdr=$2 |
| lib=$3 |
| exp=$4 |
| cfl=$5 |
| cat > $TMPC << EOF |
| #include <$hdr> |
| int main(void) { $exp } |
| EOF |
| if compile_prog "$cfl" "$lib" ; then |
| : |
| else |
| error_exit "$drv check failed" \ |
| "Make sure to have the $drv libs and headers installed." |
| fi |
| } |
| |
| audio_drv_list=`echo "$audio_drv_list" | sed -e 's/,/ /g'` |
| for drv in $audio_drv_list; do |
| case $drv in |
| alsa) |
| audio_drv_probe $drv alsa/asoundlib.h -lasound \ |
| "return snd_pcm_close((snd_pcm_t *)0);" |
| libs_softmmu="-lasound $libs_softmmu" |
| ;; |
| |
| fmod) |
| if test -z $fmod_lib || test -z $fmod_inc; then |
| error_exit "You must specify path to FMOD library and headers" \ |
| "Example: --fmod-inc=/path/include/fmod --fmod-lib=/path/lib/libfmod-3.74.so" |
| fi |
| audio_drv_probe $drv fmod.h $fmod_lib "return FSOUND_GetVersion();" "-I $fmod_inc" |
| libs_softmmu="$fmod_lib $libs_softmmu" |
| ;; |
| |
| esd) |
| audio_drv_probe $drv esd.h -lesd 'return esd_play_stream(0, 0, "", 0);' |
| libs_softmmu="-lesd $libs_softmmu" |
| audio_pt_int="yes" |
| ;; |
| |
| pa) |
| audio_drv_probe $drv pulse/mainloop.h "-lpulse" \ |
| "pa_mainloop *m = 0; pa_mainloop_free (m); return 0;" |
| libs_softmmu="-lpulse $libs_softmmu" |
| audio_pt_int="yes" |
| ;; |
| |
| coreaudio) |
| libs_softmmu="-framework CoreAudio $libs_softmmu" |
| ;; |
| |
| dsound) |
| libs_softmmu="-lole32 -ldxguid $libs_softmmu" |
| audio_win_int="yes" |
| ;; |
| |
| oss) |
| libs_softmmu="$oss_lib $libs_softmmu" |
| ;; |
| |
| sdl|wav) |
| # XXX: Probes for CoreAudio, DirectSound, SDL(?) |
| ;; |
| |
| winwave) |
| libs_softmmu="-lwinmm $libs_softmmu" |
| audio_win_int="yes" |
| ;; |
| |
| *) |
| echo "$audio_possible_drivers" | grep -q "\<$drv\>" || { |
| error_exit "Unknown driver '$drv' selected" \ |
| "Possible drivers are: $audio_possible_drivers" |
| } |
| ;; |
| esac |
| done |
| |
| ########################################## |
| # BrlAPI probe |
| |
| if test "$brlapi" != "no" ; then |
| brlapi_libs="-lbrlapi" |
| cat > $TMPC << EOF |
| #include <brlapi.h> |
| #include <stddef.h> |
| int main( void ) { return brlapi__openConnection (NULL, NULL, NULL); } |
| EOF |
| if compile_prog "" "$brlapi_libs" ; then |
| brlapi=yes |
| libs_softmmu="$brlapi_libs $libs_softmmu" |
| else |
| if test "$brlapi" = "yes" ; then |
| feature_not_found "brlapi" "Install brlapi devel" |
| fi |
| brlapi=no |
| fi |
| fi |
| |
| ########################################## |
| # curses probe |
| if test "$curses" != "no" ; then |
| if test "$mingw32" = "yes" ; then |
| curses_list="-lpdcurses" |
| else |
| curses_list="$($pkg_config --libs ncurses 2>/dev/null):-lncurses:-lcurses" |
| fi |
| curses_found=no |
| cat > $TMPC << EOF |
| #include <curses.h> |
| int main(void) { |
| const char *s = curses_version(); |
| resize_term(0, 0); |
| return s != 0; |
| } |
| EOF |
| IFS=: |
| for curses_lib in $curses_list; do |
| unset IFS |
| if compile_prog "" "$curses_lib" ; then |
| curses_found=yes |
| libs_softmmu="$curses_lib $libs_softmmu" |
| break |
| fi |
| done |
| unset IFS |
| if test "$curses_found" = "yes" ; then |
| curses=yes |
| else |
| if test "$curses" = "yes" ; then |
| feature_not_found "curses" "Install ncurses devel" |
| fi |
| curses=no |
| fi |
| fi |
| |
| ########################################## |
| # curl probe |
| if test "$curl" != "no" ; then |
| if $pkg_config libcurl --exists; then |
| curlconfig="$pkg_config libcurl" |
| else |
| curlconfig=curl-config |
| fi |
| cat > $TMPC << EOF |
| #include <curl/curl.h> |
| int main(void) { curl_easy_init(); curl_multi_setopt(0, 0, 0); return 0; } |
| EOF |
| curl_cflags=`$curlconfig --cflags 2>/dev/null` |
| curl_libs=`$curlconfig --libs 2>/dev/null` |
| if compile_prog "$curl_cflags" "$curl_libs" ; then |
| curl=yes |
| else |
| if test "$curl" = "yes" ; then |
| feature_not_found "curl" "Install libcurl devel" |
| fi |
| curl=no |
| fi |
| fi # test "$curl" |
| |
| ########################################## |
| # bluez support probe |
| if test "$bluez" != "no" ; then |
| cat > $TMPC << EOF |
| #include <bluetooth/bluetooth.h> |
| int main(void) { return bt_error(0); } |
| EOF |
| bluez_cflags=`$pkg_config --cflags bluez 2> /dev/null` |
| bluez_libs=`$pkg_config --libs bluez 2> /dev/null` |
| if compile_prog "$bluez_cflags" "$bluez_libs" ; then |
| bluez=yes |
| libs_softmmu="$bluez_libs $libs_softmmu" |
| else |
| if test "$bluez" = "yes" ; then |
| feature_not_found "bluez" "Install bluez-libs/libbluetooth devel" |
| fi |
| bluez="no" |
| fi |
| fi |
| |
| ########################################## |
| # glib support probe |
| |
| if test "$mingw32" = yes; then |
| # g_poll is required in order to integrate with the glib main loop. |
| glib_req_ver=2.20 |
| else |
| glib_req_ver=2.12 |
| fi |
| glib_modules=gthread-2.0 |
| if test "$modules" = yes; then |
| glib_modules="$glib_modules gmodule-2.0" |
| fi |
| |
| for i in $glib_modules; do |
| if $pkg_config --atleast-version=$glib_req_ver $i; then |
| glib_cflags=`$pkg_config --cflags $i` |
| glib_libs=`$pkg_config --libs $i` |
| CFLAGS="$glib_cflags $CFLAGS" |
| LIBS="$glib_libs $LIBS" |
| libs_qga="$glib_libs $libs_qga" |
| else |
| error_exit "glib-$glib_req_ver $i is required to compile QEMU" |
| fi |
| done |
| |
| # g_test_trap_subprocess added in 2.38. Used by some tests. |
| glib_subprocess=yes |
| if ! $pkg_config --atleast-version=2.38 glib-2.0; then |
| glib_subprocess=no |
| fi |
| |
| ########################################## |
| # SHA command probe for modules |
| if test "$modules" = yes; then |
| shacmd_probe="sha1sum sha1 shasum" |
| for c in $shacmd_probe; do |
| if has $c; then |
| shacmd="$c" |
| break |
| fi |
| done |
| if test "$shacmd" = ""; then |
| error_exit "one of the checksum commands is required to enable modules: $shacmd_probe" |
| fi |
| fi |
| |
| ########################################## |
| # pixman support probe |
| |
| if test "$pixman" = ""; then |
| if test "$want_tools" = "no" -a "$softmmu" = "no"; then |
| pixman="none" |
| elif $pkg_config --atleast-version=0.21.8 pixman-1 > /dev/null 2>&1; then |
| pixman="system" |
| else |
| pixman="internal" |
| fi |
| fi |
| if test "$pixman" = "none"; then |
| if test "$want_tools" != "no" -o "$softmmu" != "no"; then |
| error_exit "pixman disabled but system emulation or tools build" \ |
| "enabled. You can turn off pixman only if you also" \ |
| "disable all system emulation targets and the tools" \ |
| "build with '--disable-tools --disable-system'." |
| fi |
| pixman_cflags= |
| pixman_libs= |
| elif test "$pixman" = "system"; then |
| # pixman version has been checked above |
| pixman_cflags=`$pkg_config --cflags pixman-1` |
| pixman_libs=`$pkg_config --libs pixman-1` |
| else |
| if test ! -d ${source_path}/pixman/pixman; then |
| error_exit "pixman >= 0.21.8 not present. Your options:" \ |
| " (1) Preferred: Install the pixman devel package (any recent" \ |
| " distro should have packages as Xorg needs pixman too)." \ |
| " (2) Fetch the pixman submodule, using:" \ |
| " git submodule update --init pixman" |
| fi |
| mkdir -p pixman/pixman |
| pixman_cflags="-I\$(SRC_PATH)/pixman/pixman -I\$(BUILD_DIR)/pixman/pixman" |
| pixman_libs="-L\$(BUILD_DIR)/pixman/pixman/.libs -lpixman-1" |
| fi |
| |
| ########################################## |
| # libcap probe |
| |
| if test "$cap" != "no" ; then |
| cat > $TMPC <<EOF |
| #include <stdio.h> |
| #include <sys/capability.h> |
| int main(void) { cap_t caps; caps = cap_init(); return caps != NULL; } |
| EOF |
| if compile_prog "" "-lcap" ; then |
| cap=yes |
| else |
| cap=no |
| fi |
| fi |
| |
| ########################################## |
| # pthread probe |
| PTHREADLIBS_LIST="-pthread -lpthread -lpthreadGC2" |
| |
| pthread=no |
| cat > $TMPC << EOF |
| #include <pthread.h> |
| static void *f(void *p) { return NULL; } |
| int main(void) { |
| pthread_t thread; |
| pthread_create(&thread, 0, f, 0); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| pthread=yes |
| else |
| for pthread_lib in $PTHREADLIBS_LIST; do |
| if compile_prog "" "$pthread_lib" ; then |
| pthread=yes |
| found=no |
| for lib_entry in $LIBS; do |
| if test "$lib_entry" = "$pthread_lib"; then |
| found=yes |
| break |
| fi |
| done |
| if test "$found" = "no"; then |
| LIBS="$pthread_lib $LIBS" |
| fi |
| break |
| fi |
| done |
| fi |
| |
| if test "$mingw32" != yes -a "$pthread" = no; then |
| error_exit "pthread check failed" \ |
| "Make sure to have the pthread libs and headers installed." |
| fi |
| |
| # check for pthread_setname_np |
| pthread_setname_np=no |
| cat > $TMPC << EOF |
| #include <pthread.h> |
| |
| static void *f(void *p) { return NULL; } |
| int main(void) |
| { |
| pthread_t thread; |
| pthread_create(&thread, 0, f, 0); |
| pthread_setname_np(thread, "QEMU"); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "$pthread_lib" ; then |
| pthread_setname_np=yes |
| fi |
| |
| ########################################## |
| # rbd probe |
| if test "$rbd" != "no" ; then |
| cat > $TMPC <<EOF |
| #include <stdio.h> |
| #include <rbd/librbd.h> |
| int main(void) { |
| rados_t cluster; |
| rados_create(&cluster, NULL); |
| return 0; |
| } |
| EOF |
| rbd_libs="-lrbd -lrados" |
| if compile_prog "" "$rbd_libs" ; then |
| rbd=yes |
| else |
| if test "$rbd" = "yes" ; then |
| feature_not_found "rados block device" "Install librbd/ceph devel" |
| fi |
| rbd=no |
| fi |
| fi |
| |
| ########################################## |
| # libssh2 probe |
| min_libssh2_version=1.2.8 |
| if test "$libssh2" != "no" ; then |
| if $pkg_config --atleast-version=$min_libssh2_version libssh2; then |
| libssh2_cflags=`$pkg_config libssh2 --cflags` |
| libssh2_libs=`$pkg_config libssh2 --libs` |
| libssh2=yes |
| else |
| if test "$libssh2" = "yes" ; then |
| error_exit "libssh2 >= $min_libssh2_version required for --enable-libssh2" |
| fi |
| libssh2=no |
| fi |
| fi |
| |
| ########################################## |
| # libssh2_sftp_fsync probe |
| |
| if test "$libssh2" = "yes"; then |
| cat > $TMPC <<EOF |
| #include <stdio.h> |
| #include <libssh2.h> |
| #include <libssh2_sftp.h> |
| int main(void) { |
| LIBSSH2_SESSION *session; |
| LIBSSH2_SFTP *sftp; |
| LIBSSH2_SFTP_HANDLE *sftp_handle; |
| session = libssh2_session_init (); |
| sftp = libssh2_sftp_init (session); |
| sftp_handle = libssh2_sftp_open (sftp, "/", 0, 0); |
| libssh2_sftp_fsync (sftp_handle); |
| return 0; |
| } |
| EOF |
| # libssh2_cflags/libssh2_libs defined in previous test. |
| if compile_prog "$libssh2_cflags" "$libssh2_libs" ; then |
| QEMU_CFLAGS="-DHAS_LIBSSH2_SFTP_FSYNC $QEMU_CFLAGS" |
| fi |
| fi |
| |
| ########################################## |
| # linux-aio probe |
| |
| if test "$linux_aio" != "no" ; then |
| cat > $TMPC <<EOF |
| #include <libaio.h> |
| #include <sys/eventfd.h> |
| #include <stddef.h> |
| int main(void) { io_setup(0, NULL); io_set_eventfd(NULL, 0); eventfd(0, 0); return 0; } |
| EOF |
| if compile_prog "" "-laio" ; then |
| linux_aio=yes |
| else |
| if test "$linux_aio" = "yes" ; then |
| feature_not_found "linux AIO" "Install libaio devel" |
| fi |
| linux_aio=no |
| fi |
| fi |
| |
| ########################################## |
| # TPM passthrough is only on x86 Linux |
| |
| if test "$targetos" = Linux && test "$cpu" = i386 -o "$cpu" = x86_64; then |
| tpm_passthrough=$tpm |
| else |
| tpm_passthrough=no |
| fi |
| |
| ########################################## |
| # attr probe |
| |
| if test "$attr" != "no" ; then |
| cat > $TMPC <<EOF |
| #include <stdio.h> |
| #include <sys/types.h> |
| #ifdef CONFIG_LIBATTR |
| #include <attr/xattr.h> |
| #else |
| #include <sys/xattr.h> |
| #endif |
| int main(void) { getxattr(NULL, NULL, NULL, 0); setxattr(NULL, NULL, NULL, 0, 0); return 0; } |
| EOF |
| if compile_prog "" "" ; then |
| attr=yes |
| # Older distros have <attr/xattr.h>, and need -lattr: |
| elif compile_prog "-DCONFIG_LIBATTR" "-lattr" ; then |
| attr=yes |
| LIBS="-lattr $LIBS" |
| libattr=yes |
| else |
| if test "$attr" = "yes" ; then |
| feature_not_found "ATTR" "Install libc6 or libattr devel" |
| fi |
| attr=no |
| fi |
| fi |
| |
| ########################################## |
| # iovec probe |
| cat > $TMPC <<EOF |
| #include <sys/types.h> |
| #include <sys/uio.h> |
| #include <unistd.h> |
| int main(void) { return sizeof(struct iovec); } |
| EOF |
| iovec=no |
| if compile_prog "" "" ; then |
| iovec=yes |
| fi |
| |
| ########################################## |
| # preadv probe |
| cat > $TMPC <<EOF |
| #include <sys/types.h> |
| #include <sys/uio.h> |
| #include <unistd.h> |
| int main(void) { return preadv(0, 0, 0, 0); } |
| EOF |
| preadv=no |
| if compile_prog "" "" ; then |
| preadv=yes |
| fi |
| |
| ########################################## |
| # fdt probe |
| # fdt support is mandatory for at least some target architectures, |
| # so insist on it if we're building those system emulators. |
| fdt_required=no |
| for target in $target_list; do |
| case $target in |
| aarch64*-softmmu|arm*-softmmu|ppc*-softmmu|microblaze*-softmmu) |
| fdt_required=yes |
| ;; |
| esac |
| done |
| |
| if test "$fdt_required" = "yes"; then |
| if test "$fdt" = "no"; then |
| error_exit "fdt disabled but some requested targets require it." \ |
| "You can turn off fdt only if you also disable all the system emulation" \ |
| "targets which need it (by specifying a cut down --target-list)." |
| fi |
| fdt=yes |
| fi |
| |
| if test "$fdt" != "no" ; then |
| fdt_libs="-lfdt" |
| # explicitly check for libfdt_env.h as it is missing in some stable installs |
| cat > $TMPC << EOF |
| #include <libfdt_env.h> |
| int main(void) { return 0; } |
| EOF |
| if compile_prog "" "$fdt_libs" ; then |
| # system DTC is good - use it |
| fdt=yes |
| elif test -d ${source_path}/dtc/libfdt ; then |
| # have submodule DTC - use it |
| fdt=yes |
| dtc_internal="yes" |
| mkdir -p dtc |
| if [ "$pwd_is_source_path" != "y" ] ; then |
| symlink "$source_path/dtc/Makefile" "dtc/Makefile" |
| symlink "$source_path/dtc/scripts" "dtc/scripts" |
| fi |
| fdt_cflags="-I\$(SRC_PATH)/dtc/libfdt" |
| fdt_libs="-L\$(BUILD_DIR)/dtc/libfdt $fdt_libs" |
| elif test "$fdt" = "yes" ; then |
| # have neither and want - prompt for system/submodule install |
| error_exit "DTC (libfdt) not present. Your options:" \ |
| " (1) Preferred: Install the DTC (libfdt) devel package" \ |
| " (2) Fetch the DTC submodule, using:" \ |
| " git submodule update --init dtc" |
| else |
| # don't have and don't want |
| fdt_libs= |
| fdt=no |
| fi |
| fi |
| |
| libs_softmmu="$libs_softmmu $fdt_libs" |
| |
| ########################################## |
| # opengl probe (for sdl2, milkymist-tmu2) |
| |
| # GLX probe, used by milkymist-tmu2 |
| # this is temporary, code will be switched to egl mid-term. |
| cat > $TMPC << EOF |
| #include <X11/Xlib.h> |
| #include <GL/gl.h> |
| #include <GL/glx.h> |
| int main(void) { glBegin(0); glXQueryVersion(0,0,0); return 0; } |
| EOF |
| if compile_prog "" "-lGL -lX11" ; then |
| have_glx=yes |
| else |
| have_glx=no |
| fi |
| |
| if test "$opengl" != "no" ; then |
| opengl_pkgs="gl glesv2" |
| if $pkg_config $opengl_pkgs x11 && test "$have_glx" = "yes"; then |
| opengl_cflags="$($pkg_config --cflags $opengl_pkgs) $x11_cflags" |
| opengl_libs="$($pkg_config --libs $opengl_pkgs) $x11_libs" |
| opengl=yes |
| else |
| if test "$opengl" = "yes" ; then |
| feature_not_found "opengl" "Install GL devel (e.g. MESA)" |
| fi |
| opengl_cflags="" |
| opengl_libs="" |
| opengl=no |
| fi |
| fi |
| |
| |
| ########################################## |
| # archipelago probe |
| if test "$archipelago" != "no" ; then |
| cat > $TMPC <<EOF |
| #include <stdio.h> |
| #include <xseg/xseg.h> |
| #include <xseg/protocol.h> |
| int main(void) { |
| xseg_initialize(); |
| return 0; |
| } |
| EOF |
| archipelago_libs=-lxseg |
| if compile_prog "" "$archipelago_libs"; then |
| archipelago="yes" |
| libs_tools="$archipelago_libs $libs_tools" |
| libs_softmmu="$archipelago_libs $libs_softmmu" |
| |
| echo "WARNING: Please check the licenses of QEMU and libxseg carefully." |
| echo "GPLv3 versions of libxseg may not be compatible with QEMU's" |
| echo "license and therefore prevent redistribution." |
| echo |
| echo "To disable Archipelago, use --disable-archipelago" |
| else |
| if test "$archipelago" = "yes" ; then |
| feature_not_found "Archipelago backend support" "Install libxseg devel" |
| fi |
| archipelago="no" |
| fi |
| fi |
| |
| |
| ########################################## |
| # glusterfs probe |
| if test "$glusterfs" != "no" ; then |
| if $pkg_config --atleast-version=3 glusterfs-api; then |
| glusterfs="yes" |
| glusterfs_cflags=`$pkg_config --cflags glusterfs-api` |
| glusterfs_libs=`$pkg_config --libs glusterfs-api` |
| if $pkg_config --atleast-version=5 glusterfs-api; then |
| glusterfs_discard="yes" |
| fi |
| if $pkg_config --atleast-version=6 glusterfs-api; then |
| glusterfs_zerofill="yes" |
| fi |
| else |
| if test "$glusterfs" = "yes" ; then |
| feature_not_found "GlusterFS backend support" \ |
| "Install glusterfs-api devel >= 3" |
| fi |
| glusterfs="no" |
| fi |
| fi |
| |
| # Check for inotify functions when we are building linux-user |
| # emulator. This is done because older glibc versions don't |
| # have syscall stubs for these implemented. In that case we |
| # don't provide them even if kernel supports them. |
| # |
| inotify=no |
| cat > $TMPC << EOF |
| #include <sys/inotify.h> |
| |
| int |
| main(void) |
| { |
| /* try to start inotify */ |
| return inotify_init(); |
| } |
| EOF |
| if compile_prog "" "" ; then |
| inotify=yes |
| fi |
| |
| inotify1=no |
| cat > $TMPC << EOF |
| #include <sys/inotify.h> |
| |
| int |
| main(void) |
| { |
| /* try to start inotify */ |
| return inotify_init1(0); |
| } |
| EOF |
| if compile_prog "" "" ; then |
| inotify1=yes |
| fi |
| |
| # check if utimensat and futimens are supported |
| utimens=no |
| cat > $TMPC << EOF |
| #define _ATFILE_SOURCE |
| #include <stddef.h> |
| #include <fcntl.h> |
| #include <sys/stat.h> |
| |
| int main(void) |
| { |
| utimensat(AT_FDCWD, "foo", NULL, 0); |
| futimens(0, NULL); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| utimens=yes |
| fi |
| |
| # check if pipe2 is there |
| pipe2=no |
| cat > $TMPC << EOF |
| #include <unistd.h> |
| #include <fcntl.h> |
| |
| int main(void) |
| { |
| int pipefd[2]; |
| return pipe2(pipefd, O_CLOEXEC); |
| } |
| EOF |
| if compile_prog "" "" ; then |
| pipe2=yes |
| fi |
| |
| # check if accept4 is there |
| accept4=no |
| cat > $TMPC << EOF |
| #include <sys/socket.h> |
| #include <stddef.h> |
| |
| int main(void) |
| { |
| accept4(0, NULL, NULL, SOCK_CLOEXEC); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| accept4=yes |
| fi |
| |
| # check if tee/splice is there. vmsplice was added same time. |
| splice=no |
| cat > $TMPC << EOF |
| #include <unistd.h> |
| #include <fcntl.h> |
| #include <limits.h> |
| |
| int main(void) |
| { |
| int len, fd = 0; |
| len = tee(STDIN_FILENO, STDOUT_FILENO, INT_MAX, SPLICE_F_NONBLOCK); |
| splice(STDIN_FILENO, NULL, fd, NULL, len, SPLICE_F_MOVE); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| splice=yes |
| fi |
| |
| ########################################## |
| # libnuma probe |
| |
| if test "$numa" != "no" ; then |
| cat > $TMPC << EOF |
| #include <numa.h> |
| int main(void) { return numa_available(); } |
| EOF |
| |
| if compile_prog "" "-lnuma" ; then |
| numa=yes |
| libs_softmmu="-lnuma $libs_softmmu" |
| else |
| if test "$numa" = "yes" ; then |
| feature_not_found "numa" "install numactl devel" |
| fi |
| numa=no |
| fi |
| fi |
| |
| ########################################## |
| # tcmalloc probe |
| |
| if test "$tcmalloc" = "yes" ; then |
| cat > $TMPC << EOF |
| #include <stdlib.h> |
| int main(void) { malloc(1); return 0; } |
| EOF |
| |
| if compile_prog "" "-ltcmalloc" ; then |
| LIBS="-ltcmalloc $LIBS" |
| else |
| feature_not_found "tcmalloc" "install gperftools devel" |
| fi |
| fi |
| |
| ########################################## |
| # signalfd probe |
| signalfd="no" |
| cat > $TMPC << EOF |
| #include <unistd.h> |
| #include <sys/syscall.h> |
| #include <signal.h> |
| int main(void) { return syscall(SYS_signalfd, -1, NULL, _NSIG / 8); } |
| EOF |
| |
| if compile_prog "" "" ; then |
| signalfd=yes |
| fi |
| |
| # check if eventfd is supported |
| eventfd=no |
| cat > $TMPC << EOF |
| #include <sys/eventfd.h> |
| |
| int main(void) |
| { |
| return eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC); |
| } |
| EOF |
| if compile_prog "" "" ; then |
| eventfd=yes |
| fi |
| |
| # check for fallocate |
| fallocate=no |
| cat > $TMPC << EOF |
| #include <fcntl.h> |
| |
| int main(void) |
| { |
| fallocate(0, 0, 0, 0); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| fallocate=yes |
| fi |
| |
| # check for fallocate hole punching |
| fallocate_punch_hole=no |
| cat > $TMPC << EOF |
| #include <fcntl.h> |
| #include <linux/falloc.h> |
| |
| int main(void) |
| { |
| fallocate(0, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE, 0, 0); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| fallocate_punch_hole=yes |
| fi |
| |
| # check that fallocate supports range zeroing inside the file |
| fallocate_zero_range=no |
| cat > $TMPC << EOF |
| #include <fcntl.h> |
| #include <linux/falloc.h> |
| |
| int main(void) |
| { |
| fallocate(0, FALLOC_FL_ZERO_RANGE, 0, 0); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| fallocate_zero_range=yes |
| fi |
| |
| # check for posix_fallocate |
| posix_fallocate=no |
| cat > $TMPC << EOF |
| #include <fcntl.h> |
| |
| int main(void) |
| { |
| posix_fallocate(0, 0, 0); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| posix_fallocate=yes |
| fi |
| |
| # check for sync_file_range |
| sync_file_range=no |
| cat > $TMPC << EOF |
| #include <fcntl.h> |
| |
| int main(void) |
| { |
| sync_file_range(0, 0, 0, 0); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| sync_file_range=yes |
| fi |
| |
| # check for linux/fiemap.h and FS_IOC_FIEMAP |
| fiemap=no |
| cat > $TMPC << EOF |
| #include <sys/ioctl.h> |
| #include <linux/fs.h> |
| #include <linux/fiemap.h> |
| |
| int main(void) |
| { |
| ioctl(0, FS_IOC_FIEMAP, 0); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| fiemap=yes |
| fi |
| |
| # check for dup3 |
| dup3=no |
| cat > $TMPC << EOF |
| #include <unistd.h> |
| |
| int main(void) |
| { |
| dup3(0, 0, 0); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| dup3=yes |
| fi |
| |
| # check for ppoll support |
| ppoll=no |
| cat > $TMPC << EOF |
| #include <poll.h> |
| |
| int main(void) |
| { |
| struct pollfd pfd = { .fd = 0, .events = 0, .revents = 0 }; |
| ppoll(&pfd, 1, 0, 0); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| ppoll=yes |
| fi |
| |
| # check for prctl(PR_SET_TIMERSLACK , ... ) support |
| prctl_pr_set_timerslack=no |
| cat > $TMPC << EOF |
| #include <sys/prctl.h> |
| |
| int main(void) |
| { |
| prctl(PR_SET_TIMERSLACK, 1, 0, 0, 0); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| prctl_pr_set_timerslack=yes |
| fi |
| |
| # check for epoll support |
| epoll=no |
| cat > $TMPC << EOF |
| #include <sys/epoll.h> |
| |
| int main(void) |
| { |
| epoll_create(0); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| epoll=yes |
| fi |
| |
| # epoll_create1 and epoll_pwait are later additions |
| # so we must check separately for their presence |
| epoll_create1=no |
| cat > $TMPC << EOF |
| #include <sys/epoll.h> |
| |
| int main(void) |
| { |
| /* Note that we use epoll_create1 as a value, not as |
| * a function being called. This is necessary so that on |
| * old SPARC glibc versions where the function was present in |
| * the library but not declared in the header file we will |
| * fail the configure check. (Otherwise we will get a compiler |
| * warning but not an error, and will proceed to fail the |
| * qemu compile where we compile with -Werror.) |
| */ |
| return (int)(uintptr_t)&epoll_create1; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| epoll_create1=yes |
| fi |
| |
| epoll_pwait=no |
| cat > $TMPC << EOF |
| #include <sys/epoll.h> |
| |
| int main(void) |
| { |
| epoll_pwait(0, 0, 0, 0, 0); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| epoll_pwait=yes |
| fi |
| |
| # check for sendfile support |
| sendfile=no |
| cat > $TMPC << EOF |
| #include <sys/sendfile.h> |
| |
| int main(void) |
| { |
| return sendfile(0, 0, 0, 0); |
| } |
| EOF |
| if compile_prog "" "" ; then |
| sendfile=yes |
| fi |
| |
| # check for timerfd support (glibc 2.8 and newer) |
| timerfd=no |
| cat > $TMPC << EOF |
| #include <sys/timerfd.h> |
| |
| int main(void) |
| { |
| return(timerfd_create(CLOCK_REALTIME, 0)); |
| } |
| EOF |
| if compile_prog "" "" ; then |
| timerfd=yes |
| fi |
| |
| # check for setns and unshare support |
| setns=no |
| cat > $TMPC << EOF |
| #include <sched.h> |
| |
| int main(void) |
| { |
| int ret; |
| ret = setns(0, 0); |
| ret = unshare(0); |
| return ret; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| setns=yes |
| fi |
| |
| # Check if tools are available to build documentation. |
| if test "$docs" != "no" ; then |
| if has makeinfo && has pod2man; then |
| docs=yes |
| else |
| if test "$docs" = "yes" ; then |
| feature_not_found "docs" "Install texinfo and Perl/perl-podlators" |
| fi |
| docs=no |
| fi |
| fi |
| |
| # Search for bswap_32 function |
| byteswap_h=no |
| cat > $TMPC << EOF |
| #include <byteswap.h> |
| int main(void) { return bswap_32(0); } |
| EOF |
| if compile_prog "" "" ; then |
| byteswap_h=yes |
| fi |
| |
| # Search for bswap32 function |
| bswap_h=no |
| cat > $TMPC << EOF |
| #include <sys/endian.h> |
| #include <sys/types.h> |
| #include <machine/bswap.h> |
| int main(void) { return bswap32(0); } |
| EOF |
| if compile_prog "" "" ; then |
| bswap_h=yes |
| fi |
| |
| ########################################## |
| # Do we have libiscsi >= 1.9.0 |
| if test "$libiscsi" != "no" ; then |
| if $pkg_config --atleast-version=1.9.0 libiscsi; then |
| libiscsi="yes" |
| libiscsi_cflags=$($pkg_config --cflags libiscsi) |
| libiscsi_libs=$($pkg_config --libs libiscsi) |
| else |
| if test "$libiscsi" = "yes" ; then |
| feature_not_found "libiscsi" "Install libiscsi >= 1.9.0" |
| fi |
| libiscsi="no" |
| fi |
| fi |
| |
| ########################################## |
| # Do we need libm |
| cat > $TMPC << EOF |
| #include <math.h> |
| int main(int argc, char **argv) { return isnan(sin((double)argc)); } |
| EOF |
| if compile_prog "" "" ; then |
| : |
| elif compile_prog "" "-lm" ; then |
| LIBS="-lm $LIBS" |
| libs_qga="-lm $libs_qga" |
| else |
| error_exit "libm check failed" |
| fi |
| |
| ########################################## |
| # Do we need librt |
| # uClibc provides 2 versions of clock_gettime(), one with realtime |
| # support and one without. This means that the clock_gettime() don't |
| # need -lrt. We still need it for timer_create() so we check for this |
| # function in addition. |
| cat > $TMPC <<EOF |
| #include <signal.h> |
| #include <time.h> |
| int main(void) { |
| timer_create(CLOCK_REALTIME, NULL, NULL); |
| return clock_gettime(CLOCK_REALTIME, NULL); |
| } |
| EOF |
| |
| if compile_prog "" "" ; then |
| : |
| # we need pthread for static linking. use previous pthread test result |
| elif compile_prog "" "$pthread_lib -lrt" ; then |
| LIBS="$LIBS -lrt" |
| libs_qga="$libs_qga -lrt" |
| fi |
| |
| if test "$darwin" != "yes" -a "$mingw32" != "yes" -a "$solaris" != yes -a \ |
| "$aix" != "yes" -a "$haiku" != "yes" ; then |
| libs_softmmu="-lutil $libs_softmmu" |
| fi |
| |
| ########################################## |
| # spice probe |
| if test "$spice" != "no" ; then |
| cat > $TMPC << EOF |
| #include <spice.h> |
| int main(void) { spice_server_new(); return 0; } |
| EOF |
| spice_cflags=$($pkg_config --cflags spice-protocol spice-server 2>/dev/null) |
| spice_libs=$($pkg_config --libs spice-protocol spice-server 2>/dev/null) |
| if $pkg_config --atleast-version=0.12.0 spice-server && \ |
| $pkg_config --atleast-version=0.12.3 spice-protocol && \ |
| compile_prog "$spice_cflags" "$spice_libs" ; then |
| spice="yes" |
| libs_softmmu="$libs_softmmu $spice_libs" |
| QEMU_CFLAGS="$QEMU_CFLAGS $spice_cflags" |
| spice_protocol_version=$($pkg_config --modversion spice-protocol) |
| spice_server_version=$($pkg_config --modversion spice-server) |
| else |
| if test "$spice" = "yes" ; then |
| feature_not_found "spice" \ |
| "Install spice-server(>=0.12.0) and spice-protocol(>=0.12.3) devel" |
| fi |
| spice="no" |
| fi |
| fi |
| |
| # check for libcacard for smartcard support |
| smartcard_cflags="" |
| # TODO - what's the minimal nss version we support? |
| if test "$smartcard_nss" != "no"; then |
| cat > $TMPC << EOF |
| #include <pk11pub.h> |
| int main(void) { PK11_FreeSlot(0); return 0; } |
| EOF |
| # FIXME: do not include $glib_* in here |
| nss_libs="$($pkg_config --libs nss 2>/dev/null) $glib_libs" |
| nss_cflags="$($pkg_config --cflags nss 2>/dev/null) $glib_cflags" |
| test_cflags="$nss_cflags" |
| # The header files in nss < 3.13.3 have a bug which causes them to |
| # emit a warning. If we're going to compile QEMU with -Werror, then |
| # test that the headers don't have this bug. Otherwise we would pass |
| # the configure test but fail to compile QEMU later. |
| if test "$werror" = "yes"; then |
| test_cflags="-Werror $test_cflags" |
| fi |
| if test -n "$libtool" && |
| $pkg_config --atleast-version=3.12.8 nss && \ |
| compile_prog "$test_cflags" "$nss_libs"; then |
| smartcard_nss="yes" |
| else |
| if test "$smartcard_nss" = "yes"; then |
| feature_not_found "nss" "Install nss devel >= 3.12.8" |
| fi |
| smartcard_nss="no" |
| fi |
| fi |
| |
| # check for libusb |
| if test "$libusb" != "no" ; then |
| if $pkg_config --atleast-version=1.0.13 libusb-1.0; then |
| libusb="yes" |
| libusb_cflags=$($pkg_config --cflags libusb-1.0) |
| libusb_libs=$($pkg_config --libs libusb-1.0) |
| QEMU_CFLAGS="$QEMU_CFLAGS $libusb_cflags" |
| libs_softmmu="$libs_softmmu $libusb_libs" |
| else |
| if test "$libusb" = "yes"; then |
| feature_not_found "libusb" "Install libusb devel >= 1.0.13" |
| fi |
| libusb="no" |
| fi |
| fi |
| |
| # check for usbredirparser for usb network redirection support |
| if test "$usb_redir" != "no" ; then |
| if $pkg_config --atleast-version=0.6 libusbredirparser-0.5; then |
| usb_redir="yes" |
| usb_redir_cflags=$($pkg_config --cflags libusbredirparser-0.5) |
| usb_redir_libs=$($pkg_config --libs libusbredirparser-0.5) |
| QEMU_CFLAGS="$QEMU_CFLAGS $usb_redir_cflags" |
| libs_softmmu="$libs_softmmu $usb_redir_libs" |
| else |
| if test "$usb_redir" = "yes"; then |
| feature_not_found "usb-redir" "Install usbredir devel" |
| fi |
| usb_redir="no" |
| fi |
| fi |
| |
| ########################################## |
| # check if we have VSS SDK headers for win |
| |
| if test "$mingw32" = "yes" -a "$guest_agent" != "no" -a "$vss_win32_sdk" != "no" ; then |
| case "$vss_win32_sdk" in |
| "") vss_win32_include="-I$source_path" ;; |
| *\ *) # The SDK is installed in "Program Files" by default, but we cannot |
| # handle path with spaces. So we symlink the headers into ".sdk/vss". |
| vss_win32_include="-I$source_path/.sdk/vss" |
| symlink "$vss_win32_sdk/inc" "$source_path/.sdk/vss/inc" |
| ;; |
| *) vss_win32_include="-I$vss_win32_sdk" |
| esac |
| cat > $TMPC << EOF |
| #define __MIDL_user_allocate_free_DEFINED__ |
| #include <inc/win2003/vss.h> |
| int main(void) { return VSS_CTX_BACKUP; } |
| EOF |
| if compile_prog "$vss_win32_include" "" ; then |
| guest_agent_with_vss="yes" |
| QEMU_CFLAGS="$QEMU_CFLAGS $vss_win32_include" |
| libs_qga="-lole32 -loleaut32 -lshlwapi -luuid -lstdc++ -Wl,--enable-stdcall-fixup $libs_qga" |
| else |
| if test "$vss_win32_sdk" != "" ; then |
| echo "ERROR: Please download and install Microsoft VSS SDK:" |
| echo "ERROR: http://www.microsoft.com/en-us/download/details.aspx?id=23490" |
| echo "ERROR: On POSIX-systems, you can extract the SDK headers by:" |
| echo "ERROR: scripts/extract-vsssdk-headers setup.exe" |
| echo "ERROR: The headers are extracted in the directory \`inc'." |
| feature_not_found "VSS support" |
| fi |
| guest_agent_with_vss="no" |
| fi |
| fi |
| |
| ########################################## |
| # lookup Windows platform SDK (if not specified) |
| # The SDK is needed only to build .tlb (type library) file of guest agent |
| # VSS provider from the source. It is usually unnecessary because the |
| # pre-compiled .tlb file is included. |
| |
| if test "$mingw32" = "yes" -a "$guest_agent" != "no" -a "$guest_agent_with_vss" = "yes" ; then |
| if test -z "$win_sdk"; then |
| programfiles="$PROGRAMFILES" |
| test -n "$PROGRAMW6432" && programfiles="$PROGRAMW6432" |
| if test -n "$programfiles"; then |
| win_sdk=$(ls -d "$programfiles/Microsoft SDKs/Windows/v"* | tail -1) 2>/dev/null |
| else |
| feature_not_found "Windows SDK" |
| fi |
| elif test "$win_sdk" = "no"; then |
| win_sdk="" |
| fi |
| fi |
| |
| ########################################## |
| |
| ########################################## |
| # check if we have fdatasync |
| |
| fdatasync=no |
| cat > $TMPC << EOF |
| #include <unistd.h> |
| int main(void) { |
| #if defined(_POSIX_SYNCHRONIZED_IO) && _POSIX_SYNCHRONIZED_IO > 0 |
| return fdatasync(0); |
| #else |
| #error Not supported |
| #endif |
| } |
| EOF |
| if compile_prog "" "" ; then |
| fdatasync=yes |
| fi |
| |
| ########################################## |
| # check if we have madvise |
| |
| madvise=no |
| cat > $TMPC << EOF |
| #include <sys/types.h> |
| #include <sys/mman.h> |
| #include <stddef.h> |
| int main(void) { return madvise(NULL, 0, MADV_DONTNEED); } |
| EOF |
| if compile_prog "" "" ; then |
| madvise=yes |
| fi |
| |
| ########################################## |
| # check if we have posix_madvise |
| |
| posix_madvise=no |
| cat > $TMPC << EOF |
| #include <sys/mman.h> |
| #include <stddef.h> |
| int main(void) { return posix_madvise(NULL, 0, POSIX_MADV_DONTNEED); } |
| EOF |
| if compile_prog "" "" ; then |
| posix_madvise=yes |
| fi |
| |
| ########################################## |
| # check if we have usable SIGEV_THREAD_ID |
| |
| sigev_thread_id=no |
| cat > $TMPC << EOF |
| #include <signal.h> |
| int main(void) { |
| struct sigevent ev; |
| ev.sigev_notify = SIGEV_THREAD_ID; |
| ev._sigev_un._tid = 0; |
| asm volatile("" : : "g"(&ev)); |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| sigev_thread_id=yes |
| fi |
| |
| ########################################## |
| # check if trace backend exists |
| |
| $python "$source_path/scripts/tracetool.py" "--backends=$trace_backends" --check-backends > /dev/null 2> /dev/null |
| if test "$?" -ne 0 ; then |
| error_exit "invalid trace backends" \ |
| "Please choose supported trace backends." |
| fi |
| |
| ########################################## |
| # For 'ust' backend, test if ust headers are present |
| if have_backend "ust"; then |
| cat > $TMPC << EOF |
| #include <lttng/tracepoint.h> |
| int main(void) { return 0; } |
| EOF |
| if compile_prog "" "" ; then |
| if $pkg_config lttng-ust --exists; then |
| lttng_ust_libs=`$pkg_config --libs lttng-ust` |
| else |
| lttng_ust_libs="-llttng-ust" |
| fi |
| if $pkg_config liburcu-bp --exists; then |
| urcu_bp_libs=`$pkg_config --libs liburcu-bp` |
| else |
| urcu_bp_libs="-lurcu-bp" |
| fi |
| |
| LIBS="$lttng_ust_libs $urcu_bp_libs $LIBS" |
| libs_qga="$lttng_ust_libs $urcu_bp_libs $libs_qga" |
| else |
| error_exit "Trace backend 'ust' missing lttng-ust header files" |
| fi |
| fi |
| |
| ########################################## |
| # For 'dtrace' backend, test if 'dtrace' command is present |
| if have_backend "dtrace"; then |
| if ! has 'dtrace' ; then |
| error_exit "dtrace command is not found in PATH $PATH" |
| fi |
| trace_backend_stap="no" |
| if has 'stap' ; then |
| trace_backend_stap="yes" |
| fi |
| fi |
| |
| ########################################## |
| # check and set a backend for coroutine |
| |
| # We prefer ucontext, but it's not always possible. The fallback |
| # is sigcontext. gthread is not selectable except explicitly, because |
| # it is not functional enough to run QEMU proper. (It is occasionally |
| # useful for debugging purposes.) On Windows the only valid backend |
| # is the Windows-specific one. |
| |
| ucontext_works=no |
| if test "$darwin" != "yes"; then |
| cat > $TMPC << EOF |
| #include <ucontext.h> |
| #ifdef __stub_makecontext |
| #error Ignoring glibc stub makecontext which will always fail |
| #endif |
| int main(void) { makecontext(0, 0, 0); return 0; } |
| EOF |
| if compile_prog "" "" ; then |
| ucontext_works=yes |
| fi |
| fi |
| |
| if test "$coroutine" = ""; then |
| if test "$mingw32" = "yes"; then |
| coroutine=win32 |
| elif test "$ucontext_works" = "yes"; then |
| coroutine=ucontext |
| else |
| coroutine=sigaltstack |
| fi |
| else |
| case $coroutine in |
| windows) |
| if test "$mingw32" != "yes"; then |
| error_exit "'windows' coroutine backend only valid for Windows" |
| fi |
| # Unfortunately the user visible backend name doesn't match the |
| # coroutine-*.c filename for this case, so we have to adjust it here. |
| coroutine=win32 |
| ;; |
| ucontext) |
| if test "$ucontext_works" != "yes"; then |
| feature_not_found "ucontext" |
| fi |
| ;; |
| gthread|sigaltstack) |
| if test "$mingw32" = "yes"; then |
| error_exit "only the 'windows' coroutine backend is valid for Windows" |
| fi |
| ;; |
| *) |
| error_exit "unknown coroutine backend $coroutine" |
| ;; |
| esac |
| fi |
| |
| if test "$coroutine_pool" = ""; then |
| if test "$coroutine" = "gthread"; then |
| coroutine_pool=no |
| else |
| coroutine_pool=yes |
| fi |
| fi |
| if test "$coroutine" = "gthread" -a "$coroutine_pool" = "yes"; then |
| error_exit "'gthread' coroutine backend does not support pool (use --disable-coroutine-pool)" |
| fi |
| |
| ########################################## |
| # check if we have open_by_handle_at |
| |
| open_by_handle_at=no |
| cat > $TMPC << EOF |
| #include <fcntl.h> |
| #if !defined(AT_EMPTY_PATH) |
| # error missing definition |
| #else |
| int main(void) { struct file_handle fh; return open_by_handle_at(0, &fh, 0); } |
| #endif |
| EOF |
| if compile_prog "" "" ; then |
| open_by_handle_at=yes |
| fi |
| |
| ######################################## |
| # check if we have linux/magic.h |
| |
| linux_magic_h=no |
| cat > $TMPC << EOF |
| #include <linux/magic.h> |
| int main(void) { |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| linux_magic_h=yes |
| fi |
| |
| ######################################## |
| # check whether we can disable warning option with a pragma (this is needed |
| # to silence warnings in the headers of some versions of external libraries). |
| # This test has to be compiled with -Werror as otherwise an unknown pragma is |
| # only a warning. |
| # |
| # If we can't selectively disable warning in the code, disable -Werror so that |
| # the build doesn't fail anyway. |
| |
| pragma_disable_unused_but_set=no |
| cat > $TMPC << EOF |
| #pragma GCC diagnostic push |
| #pragma GCC diagnostic ignored "-Wunused-but-set-variable" |
| #pragma GCC diagnostic ignored "-Wstrict-prototypes" |
| #pragma GCC diagnostic pop |
| |
| int main(void) { |
| return 0; |
| } |
| EOF |
| if compile_prog "-Werror" "" ; then |
| pragma_diagnostic_available=yes |
| else |
| werror=no |
| fi |
| |
| ######################################## |
| # check if we have valgrind/valgrind.h |
| |
| valgrind_h=no |
| cat > $TMPC << EOF |
| #include <valgrind/valgrind.h> |
| int main(void) { |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| valgrind_h=yes |
| fi |
| |
| ######################################## |
| # check if environ is declared |
| |
| has_environ=no |
| cat > $TMPC << EOF |
| #include <unistd.h> |
| int main(void) { |
| environ = 0; |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| has_environ=yes |
| fi |
| |
| ######################################## |
| # check if cpuid.h is usable. |
| |
| cpuid_h=no |
| cat > $TMPC << EOF |
| #include <cpuid.h> |
| int main(void) { |
| unsigned a, b, c, d; |
| int max = __get_cpuid_max(0, 0); |
| |
| if (max >= 1) { |
| __cpuid(1, a, b, c, d); |
| } |
| |
| if (max >= 7) { |
| __cpuid_count(7, 0, a, b, c, d); |
| } |
| |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| cpuid_h=yes |
| fi |
| |
| ######################################## |
| # check if __[u]int128_t is usable. |
| |
| int128=no |
| cat > $TMPC << EOF |
| #if defined(__clang_major__) && defined(__clang_minor__) |
| # if ((__clang_major__ < 3) || (__clang_major__ == 3) && (__clang_minor__ < 2)) |
| # error __int128_t does not work in CLANG before 3.2 |
| # endif |
| #endif |
| __int128_t a; |
| __uint128_t b; |
| int main (void) { |
| a = a + b; |
| b = a * b; |
| a = a * a; |
| return 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| int128=yes |
| fi |
| |
| ######################################## |
| # check if getauxval is available. |
| |
| getauxval=no |
| cat > $TMPC << EOF |
| #include <sys/auxv.h> |
| int main(void) { |
| return getauxval(AT_HWCAP) == 0; |
| } |
| EOF |
| if compile_prog "" "" ; then |
| getauxval=yes |
| fi |
| |
| ########################################## |
| # End of CC checks |
| # After here, no more $cc or $ld runs |
| |
| if test "$gcov" = "yes" ; then |
| CFLAGS="-fprofile-arcs -ftest-coverage -g $CFLAGS" |
| LDFLAGS="-fprofile-arcs -ftest-coverage $LDFLAGS" |
| elif test "$debug" = "no" ; then |
| CFLAGS="-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 $CFLAGS" |
| fi |
| |
| ########################################## |
| # Do we have libnfs |
| if test "$libnfs" != "no" ; then |
| if $pkg_config --atleast-version=1.9.3 libnfs; then |
| libnfs="yes" |
| libnfs_libs=$($pkg_config --libs libnfs) |
| LIBS="$LIBS $libnfs_libs" |
| else |
| if test "$libnfs" = "yes" ; then |
| feature_not_found "libnfs" "Install libnfs devel >= 1.9.3" |
| fi |
| libnfs="no" |
| fi |
| fi |
| |
| # Disable zero malloc errors for official releases unless explicitly told to |
| # enable/disable |
| if test -z "$zero_malloc" ; then |
| if test "$z_version" = "50" ; then |
| zero_malloc="no" |
| else |
| zero_malloc="yes" |
| fi |
| fi |
| |
| # Now we've finished running tests it's OK to add -Werror to the compiler flags |
| if test "$werror" = "yes"; then |
| QEMU_CFLAGS="-Werror $QEMU_CFLAGS" |
| fi |
| |
| if test "$solaris" = "no" ; then |
| if $ld --version 2>/dev/null | grep "GNU ld" >/dev/null 2>/dev/null ; then |
| LDFLAGS="-Wl,--warn-common $LDFLAGS" |
| fi |
| fi |
| |
| # test if pod2man has --utf8 option |
| if pod2man --help | grep -q utf8; then |
| POD2MAN="pod2man --utf8" |
| else |
| POD2MAN="pod2man" |
| fi |
| |
| # Use ASLR, no-SEH and DEP if available |
| if test "$mingw32" = "yes" ; then |
| for flag in --dynamicbase --no-seh --nxcompat; do |
| if $ld --help 2>/dev/null | grep ".$flag" >/dev/null 2>/dev/null ; then |
| LDFLAGS="-Wl,$flag $LDFLAGS" |
| fi |
| done |
| fi |
| |
| qemu_confdir=$sysconfdir$confsuffix |
| qemu_moddir=$libdir$confsuffix |
| qemu_datadir=$datadir$confsuffix |
| qemu_localedir="$datadir/locale" |
| |
| tools="" |
| if test "$want_tools" = "yes" ; then |
| tools="qemu-img\$(EXESUF) qemu-io\$(EXESUF) $tools" |
| if [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" ] ; then |
| tools="qemu-nbd\$(EXESUF) $tools" |
| fi |
| fi |
| if test "$softmmu" = yes ; then |
| if test "$virtfs" != no ; then |
| if test "$cap" = yes && test "$linux" = yes && test "$attr" = yes ; then |
| virtfs=yes |
| tools="$tools fsdev/virtfs-proxy-helper\$(EXESUF)" |
| else |
| if test "$virtfs" = yes; then |
| error_exit "VirtFS is supported only on Linux and requires libcap-devel and libattr-devel" |
| fi |
| virtfs=no |
| fi |
| fi |
| fi |
| if [ "$guest_agent" != "no" ]; then |
| if [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" -o "$mingw32" = "yes" ] ; then |
| tools="qemu-ga\$(EXESUF) $tools" |
| if [ "$mingw32" = "yes" -a "$guest_agent_with_vss" = "yes" ]; then |
| tools="qga/vss-win32/qga-vss.dll qga/vss-win32/qga-vss.tlb $tools" |
| fi |
| guest_agent=yes |
| elif [ "$guest_agent" != yes ]; then |
| guest_agent=no |
| else |
| error_exit "Guest agent is not supported on this platform" |
| fi |
| fi |
| |
| # Mac OS X ships with a broken assembler |
| roms= |
| if test \( "$cpu" = "i386" -o "$cpu" = "x86_64" \) -a \ |
| "$targetos" != "Darwin" -a "$targetos" != "SunOS" -a \ |
| "$softmmu" = yes ; then |
| roms="optionrom" |
| fi |
| if test "$cpu" = "ppc64" -a "$targetos" != "Darwin" ; then |
| roms="$roms spapr-rtas" |
| fi |
| |
| if test "$cpu" = "s390x" ; then |
| roms="$roms s390-ccw" |
| fi |
| |
| # Probe for the need for relocating the user-only binary. |
| if test "$pie" = "no" ; then |
| textseg_addr= |
| case "$cpu" in |
| arm | i386 | ppc* | s390* | sparc* | x86_64 | x32) |
| # ??? Rationale for choosing this address |
| textseg_addr=0x60000000 |
| ;; |
| mips) |
| # A 256M aligned address, high in the address space, with enough |
| # room for the code_gen_buffer above it before the stack. |
| textseg_addr=0x60000000 |
| ;; |
| esac |
| if [ -n "$textseg_addr" ]; then |
| cat > $TMPC <<EOF |
| int main(void) { return 0; } |
| EOF |
| textseg_ldflags="-Wl,-Ttext-segment=$textseg_addr" |
| if ! compile_prog "" "$textseg_ldflags"; then |
| # In case ld does not support -Ttext-segment, edit the default linker |
| # script via sed to set the .text start addr. This is needed on FreeBSD |
| # at least. |
| $ld --verbose | sed \ |
| -e '1,/==================================================/d' \ |
| -e '/==================================================/,$d' \ |
| -e "s/[.] = [0-9a-fx]* [+] SIZEOF_HEADERS/. = $textseg_addr + SIZEOF_HEADERS/" \ |
| -e "s/__executable_start = [0-9a-fx]*/__executable_start = $textseg_addr/" > config-host.ld |
| textseg_ldflags="-Wl,-T../config-host.ld" |
| fi |
| fi |
| fi |
| |
| # prepend pixman and ftd flags after all config tests are done |
| QEMU_CFLAGS="$pixman_cflags $fdt_cflags $QEMU_CFLAGS" |
| libs_softmmu="$pixman_libs $libs_softmmu" |
| |
| echo "Install prefix $prefix" |
| echo "BIOS directory `eval echo $qemu_datadir`" |
| echo "binary directory `eval echo $bindir`" |
| echo "library directory `eval echo $libdir`" |
| echo "module directory `eval echo $qemu_moddir`" |
| echo "libexec directory `eval echo $libexecdir`" |
| echo "include directory `eval echo $includedir`" |
| echo "config directory `eval echo $sysconfdir`" |
| if test "$mingw32" = "no" ; then |
| echo "local state directory `eval echo $local_statedir`" |
| echo "Manual directory `eval echo $mandir`" |
| echo "ELF interp prefix $interp_prefix" |
| else |
| echo "local state directory queried at runtime" |
| echo "Windows SDK $win_sdk" |
| fi |
| echo "Source path $source_path" |
| echo "C compiler $cc" |
| echo "Host C compiler $host_cc" |
| echo "C++ compiler $cxx" |
| echo "Objective-C compiler $objcc" |
| echo "ARFLAGS $ARFLAGS" |
| echo "CFLAGS $CFLAGS" |
| echo "QEMU_CFLAGS $QEMU_CFLAGS" |
| echo "LDFLAGS $LDFLAGS" |
| echo "make $make" |
| echo "install $install" |
| echo "python $python" |
| if test "$slirp" = "yes" ; then |
| echo "smbd $smbd" |
| fi |
| echo "module support $modules" |
| echo "host CPU $cpu" |
| echo "host big endian $bigendian" |
| echo "target list $target_list" |
| echo "tcg debug enabled $debug_tcg" |
| echo "gprof enabled $gprof" |
| echo "sparse enabled $sparse" |
| echo "strip binaries $strip_opt" |
| echo "profiler $profiler" |
| echo "static build $static" |
| if test "$darwin" = "yes" ; then |
| echo "Cocoa support $cocoa" |
| fi |
| echo "pixman $pixman" |
| echo "SDL support $sdl" |
| echo "GTK support $gtk" |
| echo "VTE support $vte" |
| echo "curses support $curses" |
| echo "curl support $curl" |
| echo "mingw32 support $mingw32" |
| echo "Audio drivers $audio_drv_list" |
| echo "Block whitelist (rw) $block_drv_rw_whitelist" |
| echo "Block whitelist (ro) $block_drv_ro_whitelist" |
| echo "VirtFS support $virtfs" |
| echo "VNC support $vnc" |
| if test "$vnc" = "yes" ; then |
| echo "VNC TLS support $vnc_tls" |
| echo "VNC SASL support $vnc_sasl" |
| echo "VNC JPEG support $vnc_jpeg" |
| echo "VNC PNG support $vnc_png" |
| echo "VNC WS support $vnc_ws" |
| fi |
| if test -n "$sparc_cpu"; then |
| echo "Target Sparc Arch $sparc_cpu" |
| fi |
| echo "xen support $xen" |
| if test "$xen" = "yes" ; then |
| echo "xen ctrl version $xen_ctrl_version" |
| fi |
| echo "brlapi support $brlapi" |
| echo "bluez support $bluez" |
| echo "Documentation $docs" |
| echo "GUEST_BASE $guest_base" |
| echo "PIE $pie" |
| echo "vde support $vde" |
| echo "netmap support $netmap" |
| echo "Linux AIO support $linux_aio" |
| echo "ATTR/XATTR support $attr" |
| echo "Install blobs $blobs" |
| echo "KVM support $kvm" |
| echo "RDMA support $rdma" |
| echo "TCG interpreter $tcg_interpreter" |
| echo "fdt support $fdt" |
| echo "preadv support $preadv" |
| echo "fdatasync $fdatasync" |
| echo "madvise $madvise" |
| echo "posix_madvise $posix_madvise" |
| echo "sigev_thread_id $sigev_thread_id" |
| echo "uuid support $uuid" |
| echo "libcap-ng support $cap_ng" |
| echo "vhost-net support $vhost_net" |
| echo "vhost-scsi support $vhost_scsi" |
| echo "Trace backends $trace_backends" |
| if test "$trace_backend" = "simple"; then |
| echo "Trace output file $trace_file-<pid>" |
| fi |
| if test "$spice" = "yes"; then |
| echo "spice support $spice ($spice_protocol_version/$spice_server_version)" |
| else |
| echo "spice support $spice" |
| fi |
| echo "rbd support $rbd" |
| echo "xfsctl support $xfs" |
| echo "nss used $smartcard_nss" |
| echo "libusb $libusb" |
| echo "usb net redir $usb_redir" |
| echo "OpenGL support $opengl" |
| echo "libiscsi support $libiscsi" |
| echo "libnfs support $libnfs" |
| echo "build guest agent $guest_agent" |
| echo "QGA VSS support $guest_agent_with_vss" |
| echo "seccomp support $seccomp" |
| echo "coroutine backend $coroutine" |
| echo "coroutine pool $coroutine_pool" |
| echo "GlusterFS support $glusterfs" |
| echo "Archipelago support $archipelago" |
| echo "gcov $gcov_tool" |
| echo "gcov enabled $gcov" |
| echo "TPM support $tpm" |
| echo "libssh2 support $libssh2" |
| echo "TPM passthrough $tpm_passthrough" |
| echo "QOM debugging $qom_cast_debug" |
| echo "vhdx $vhdx" |
| echo "Quorum $quorum" |
| echo "lzo support $lzo" |
| echo "snappy support $snappy" |
| echo "bzip2 support $bzip2" |
| echo "NUMA host support $numa" |
| echo "tcmalloc support $tcmalloc" |
| |
| if test "$sdl_too_old" = "yes"; then |
| echo "-> Your SDL version is too old - please upgrade to have SDL support" |
| fi |
| |
| config_host_mak="config-host.mak" |
| |
| echo "# Automatically generated by configure - do not modify" >config-all-disas.mak |
| |
| echo "# Automatically generated by configure - do not modify" > $config_host_mak |
| echo >> $config_host_mak |
| |
| echo all: >> $config_host_mak |
| echo "prefix=$prefix" >> $config_host_mak |
| echo "bindir=$bindir" >> $config_host_mak |
| echo "libdir=$libdir" >> $config_host_mak |
| echo "libexecdir=$libexecdir" >> $config_host_mak |
| echo "includedir=$includedir" >> $config_host_mak |
| echo "mandir=$mandir" >> $config_host_mak |
| echo "sysconfdir=$sysconfdir" >> $config_host_mak |
| echo "qemu_confdir=$qemu_confdir" >> $config_host_mak |
| echo "qemu_datadir=$qemu_datadir" >> $config_host_mak |
| echo "qemu_docdir=$qemu_docdir" >> $config_host_mak |
| echo "qemu_moddir=$qemu_moddir" >> $config_host_mak |
| if test "$mingw32" = "no" ; then |
| echo "qemu_localstatedir=$local_statedir" >> $config_host_mak |
| fi |
| echo "qemu_helperdir=$libexecdir" >> $config_host_mak |
| echo "extra_cflags=$EXTRA_CFLAGS" >> $config_host_mak |
| echo "extra_ldflags=$EXTRA_LDFLAGS" >> $config_host_mak |
| echo "qemu_localedir=$qemu_localedir" >> $config_host_mak |
| echo "libs_softmmu=$libs_softmmu" >> $config_host_mak |
| |
| echo "ARCH=$ARCH" >> $config_host_mak |
| |
| if test "$debug_tcg" = "yes" ; then |
| echo "CONFIG_DEBUG_TCG=y" >> $config_host_mak |
| fi |
| if test "$strip_opt" = "yes" ; then |
| echo "STRIP=${strip}" >> $config_host_mak |
| fi |
| if test "$bigendian" = "yes" ; then |
| echo "HOST_WORDS_BIGENDIAN=y" >> $config_host_mak |
| fi |
| if test "$mingw32" = "yes" ; then |
| echo "CONFIG_WIN32=y" >> $config_host_mak |
| rc_version=`cat $source_path/VERSION` |
| version_major=${rc_version%%.*} |
| rc_version=${rc_version#*.} |
| version_minor=${rc_version%%.*} |
| rc_version=${rc_version#*.} |
| version_subminor=${rc_version%%.*} |
| version_micro=0 |
| echo "CONFIG_FILEVERSION=$version_major,$version_minor,$version_subminor,$version_micro" >> $config_host_mak |
| echo "CONFIG_PRODUCTVERSION=$version_major,$version_minor,$version_subminor,$version_micro" >> $config_host_mak |
| if test "$guest_agent_with_vss" = "yes" ; then |
| echo "CONFIG_QGA_VSS=y" >> $config_host_mak |
| echo "WIN_SDK=\"$win_sdk\"" >> $config_host_mak |
| fi |
| else |
| echo "CONFIG_POSIX=y" >> $config_host_mak |
| fi |
| |
| if test "$linux" = "yes" ; then |
| echo "CONFIG_LINUX=y" >> $config_host_mak |
| fi |
| |
| if test "$darwin" = "yes" ; then |
| echo "CONFIG_DARWIN=y" >> $config_host_mak |
| fi |
| |
| if test "$aix" = "yes" ; then |
| echo "CONFIG_AIX=y" >> $config_host_mak |
| fi |
| |
| if test "$solaris" = "yes" ; then |
| echo "CONFIG_SOLARIS=y" >> $config_host_mak |
| echo "CONFIG_SOLARIS_VERSION=$solarisrev" >> $config_host_mak |
| if test "$needs_libsunmath" = "yes" ; then |
| echo "CONFIG_NEEDS_LIBSUNMATH=y" >> $config_host_mak |
| fi |
| fi |
| if test "$haiku" = "yes" ; then |
| echo "CONFIG_HAIKU=y" >> $config_host_mak |
| fi |
| if test "$static" = "yes" ; then |
| echo "CONFIG_STATIC=y" >> $config_host_mak |
| fi |
| if test "$profiler" = "yes" ; then |
| echo "CONFIG_PROFILER=y" >> $config_host_mak |
| fi |
| if test "$slirp" = "yes" ; then |
| echo "CONFIG_SLIRP=y" >> $config_host_mak |
| echo "CONFIG_SMBD_COMMAND=\"$smbd\"" >> $config_host_mak |
| fi |
| if test "$vde" = "yes" ; then |
| echo "CONFIG_VDE=y" >> $config_host_mak |
| fi |
| if test "$netmap" = "yes" ; then |
| echo "CONFIG_NETMAP=y" >> $config_host_mak |
| fi |
| if test "$l2tpv3" = "yes" ; then |
| echo "CONFIG_L2TPV3=y" >> $config_host_mak |
| fi |
| if test "$cap_ng" = "yes" ; then |
| echo "CONFIG_LIBCAP=y" >> $config_host_mak |
| fi |
| echo "CONFIG_AUDIO_DRIVERS=$audio_drv_list" >> $config_host_mak |
| for drv in $audio_drv_list; do |
| def=CONFIG_`echo $drv | LC_ALL=C tr '[a-z]' '[A-Z]'` |
| echo "$def=y" >> $config_host_mak |
| if test "$drv" = "fmod"; then |
| echo "FMOD_CFLAGS=-I$fmod_inc" >> $config_host_mak |
| fi |
| done |
| if test "$audio_pt_int" = "yes" ; then |
| echo "CONFIG_AUDIO_PT_INT=y" >> $config_host_mak |
| fi |
| if test "$audio_win_int" = "yes" ; then |
| echo "CONFIG_AUDIO_WIN_INT=y" >> $config_host_mak |
| fi |
| echo "CONFIG_BDRV_RW_WHITELIST=$block_drv_rw_whitelist" >> $config_host_mak |
| echo "CONFIG_BDRV_RO_WHITELIST=$block_drv_ro_whitelist" >> $config_host_mak |
| if test "$vnc" = "yes" ; then |
| echo "CONFIG_VNC=y" >> $config_host_mak |
| fi |
| if test "$vnc_tls" = "yes" ; then |
| echo "CONFIG_VNC_TLS=y" >> $config_host_mak |
| fi |
| if test "$vnc_sasl" = "yes" ; then |
| echo "CONFIG_VNC_SASL=y" >> $config_host_mak |
| fi |
| if test "$vnc_jpeg" = "yes" ; then |
| echo "CONFIG_VNC_JPEG=y" >> $config_host_mak |
| fi |
| if test "$vnc_png" = "yes" ; then |
| echo "CONFIG_VNC_PNG=y" >> $config_host_mak |
| fi |
| if test "$vnc_ws" = "yes" ; then |
| echo "CONFIG_VNC_WS=y" >> $config_host_mak |
| echo "VNC_WS_CFLAGS=$vnc_ws_cflags" >> $config_host_mak |
| fi |
| if test "$fnmatch" = "yes" ; then |
| echo "CONFIG_FNMATCH=y" >> $config_host_mak |
| fi |
| if test "$uuid" = "yes" ; then |
| echo "CONFIG_UUID=y" >> $config_host_mak |
| fi |
| if test "$xfs" = "yes" ; then |
| echo "CONFIG_XFS=y" >> $config_host_mak |
| fi |
| qemu_version=`head $source_path/VERSION` |
| echo "VERSION=$qemu_version" >>$config_host_mak |
| echo "PKGVERSION=$pkgversion" >>$config_host_mak |
| echo "SRC_PATH=$source_path" >> $config_host_mak |
| echo "TARGET_DIRS=$target_list" >> $config_host_mak |
| if [ "$docs" = "yes" ] ; then |
| echo "BUILD_DOCS=yes" >> $config_host_mak |
| fi |
| if test "$modules" = "yes"; then |
| # $shacmd can generate a hash started with digit, which the compiler doesn't |
| # like as an symbol. So prefix it with an underscore |
| echo "CONFIG_STAMP=_`(echo $qemu_version; echo $pkgversion; cat $0) | $shacmd - | cut -f1 -d\ `" >> $config_host_mak |
| echo "CONFIG_MODULES=y" >> $config_host_mak |
| fi |
| if test "$sdl" = "yes" ; then |
| echo "CONFIG_SDL=y" >> $config_host_mak |
| echo "CONFIG_SDLABI=$sdlabi" >> $config_host_mak |
| echo "SDL_CFLAGS=$sdl_cflags" >> $config_host_mak |
| fi |
| if test "$cocoa" = "yes" ; then |
| echo "CONFIG_COCOA=y" >> $config_host_mak |
| fi |
| if test "$curses" = "yes" ; then |
| echo "CONFIG_CURSES=y" >> $config_host_mak |
| fi |
| if test "$utimens" = "yes" ; then |
| echo "CONFIG_UTIMENSAT=y" >> $config_host_mak |
| fi |
| if test "$pipe2" = "yes" ; then |
| echo "CONFIG_PIPE2=y" >> $config_host_mak |
| fi |
| if test "$accept4" = "yes" ; then |
| echo "CONFIG_ACCEPT4=y" >> $config_host_mak |
| fi |
| if test "$splice" = "yes" ; then |
| echo "CONFIG_SPLICE=y" >> $config_host_mak |
| fi |
| if test "$eventfd" = "yes" ; then |
| echo "CONFIG_EVENTFD=y" >> $config_host_mak |
| fi |
| if test "$fallocate" = "yes" ; then |
| echo "CONFIG_FALLOCATE=y" >> $config_host_mak |
| fi |
| if test "$fallocate_punch_hole" = "yes" ; then |
| echo "CONFIG_FALLOCATE_PUNCH_HOLE=y" >> $config_host_mak |
| fi |
| if test "$fallocate_zero_range" = "yes" ; then |
| echo "CONFIG_FALLOCATE_ZERO_RANGE=y" >> $config_host_mak |
| fi |
| if test "$posix_fallocate" = "yes" ; then |
| echo "CONFIG_POSIX_FALLOCATE=y" >> $config_host_mak |
| fi |
| if test "$sync_file_range" = "yes" ; then |
| echo "CONFIG_SYNC_FILE_RANGE=y" >> $config_host_mak |
| fi |
| if test "$fiemap" = "yes" ; then |
| echo "CONFIG_FIEMAP=y" >> $config_host_mak |
| fi |
| if test "$dup3" = "yes" ; then |
| echo "CONFIG_DUP3=y" >> $config_host_mak |
| fi |
| if test "$ppoll" = "yes" ; then |
| echo "CONFIG_PPOLL=y" >> $config_host_mak |
| fi |
| if test "$prctl_pr_set_timerslack" = "yes" ; then |
| echo "CONFIG_PRCTL_PR_SET_TIMERSLACK=y" >> $config_host_mak |
| fi |
| if test "$epoll" = "yes" ; then |
| echo "CONFIG_EPOLL=y" >> $config_host_mak |
| fi |
| if test "$epoll_create1" = "yes" ; then |
| echo "CONFIG_EPOLL_CREATE1=y" >> $config_host_mak |
| fi |
| if test "$epoll_pwait" = "yes" ; then |
| echo "CONFIG_EPOLL_PWAIT=y" >> $config_host_mak |
| fi |
| if test "$sendfile" = "yes" ; then |
| echo "CONFIG_SENDFILE=y" >> $config_host_mak |
| fi |
| if test "$timerfd" = "yes" ; then |
| echo "CONFIG_TIMERFD=y" >> $config_host_mak |
| fi |
| if test "$setns" = "yes" ; then |
| echo "CONFIG_SETNS=y" >> $config_host_mak |
| fi |
| if test "$inotify" = "yes" ; then |
| echo "CONFIG_INOTIFY=y" >> $config_host_mak |
| fi |
| if test "$inotify1" = "yes" ; then |
| echo "CONFIG_INOTIFY1=y" >> $config_host_mak |
| fi |
| if test "$byteswap_h" = "yes" ; then |
| echo "CONFIG_BYTESWAP_H=y" >> $config_host_mak |
| fi |
| if test "$bswap_h" = "yes" ; then |
| echo "CONFIG_MACHINE_BSWAP_H=y" >> $config_host_mak |
| fi |
| if test "$curl" = "yes" ; then |
| echo "CONFIG_CURL=m" >> $config_host_mak |
| echo "CURL_CFLAGS=$curl_cflags" >> $config_host_mak |
| echo "CURL_LIBS=$curl_libs" >> $config_host_mak |
| fi |
| if test "$brlapi" = "yes" ; then |
| echo "CONFIG_BRLAPI=y" >> $config_host_mak |
| fi |
| if test "$bluez" = "yes" ; then |
| echo "CONFIG_BLUEZ=y" >> $config_host_mak |
| echo "BLUEZ_CFLAGS=$bluez_cflags" >> $config_host_mak |
| fi |
| if test "glib_subprocess" = "yes" ; then |
| echo "CONFIG_HAS_GLIB_SUBPROCESS_TESTS=y" >> $config_host_mak |
| fi |
| echo "GLIB_CFLAGS=$glib_cflags" >> $config_host_mak |
| if test "$gtk" = "yes" ; then |
| echo "CONFIG_GTK=y" >> $config_host_mak |
| echo "CONFIG_GTKABI=$gtkabi" >> $config_host_mak |
| echo "GTK_CFLAGS=$gtk_cflags" >> $config_host_mak |
| fi |
| if test "$vte" = "yes" ; then |
| echo "CONFIG_VTE=y" >> $config_host_mak |
| echo "VTE_CFLAGS=$vte_cflags" >> $config_host_mak |
| fi |
| if test "$xen" = "yes" ; then |
| echo "CONFIG_XEN_BACKEND=y" >> $config_host_mak |
| echo "CONFIG_XEN_CTRL_INTERFACE_VERSION=$xen_ctrl_version" >> $config_host_mak |
| fi |
| if test "$linux_aio" = "yes" ; then |
| echo "CONFIG_LINUX_AIO=y" >> $config_host_mak |
| fi |
| if test "$attr" = "yes" ; then |
| echo "CONFIG_ATTR=y" >> $config_host_mak |
| fi |
| if test "$libattr" = "yes" ; then |
| echo "CONFIG_LIBATTR=y" >> $config_host_mak |
| fi |
| if test "$virtfs" = "yes" ; then |
| echo "CONFIG_VIRTFS=y" >> $config_host_mak |
| fi |
| if test "$vhost_scsi" = "yes" ; then |
| echo "CONFIG_VHOST_SCSI=y" >> $config_host_mak |
| fi |
| if test "$vhost_net" = "yes" ; then |
| echo "CONFIG_VHOST_NET_USED=y" >> $config_host_mak |
| fi |
| if test "$blobs" = "yes" ; then |
| echo "INSTALL_BLOBS=yes" >> $config_host_mak |
| fi |
| if test "$iovec" = "yes" ; then |
| echo "CONFIG_IOVEC=y" >> $config_host_mak |
| fi |
| if test "$preadv" = "yes" ; then |
| echo "CONFIG_PREADV=y" >> $config_host_mak |
| fi |
| if test "$fdt" = "yes" ; then |
| echo "CONFIG_FDT=y" >> $config_host_mak |
| fi |
| if test "$signalfd" = "yes" ; then |
| echo "CONFIG_SIGNALFD=y" >> $config_host_mak |
| fi |
| if test "$tcg_interpreter" = "yes" ; then |
| echo "CONFIG_TCG_INTERPRETER=y" >> $config_host_mak |
| fi |
| if test "$fdatasync" = "yes" ; then |
| echo "CONFIG_FDATASYNC=y" >> $config_host_mak |
| fi |
| if test "$madvise" = "yes" ; then |
| echo "CONFIG_MADVISE=y" >> $config_host_mak |
| fi |
| if test "$posix_madvise" = "yes" ; then |
| echo "CONFIG_POSIX_MADVISE=y" >> $config_host_mak |
| fi |
| if test "$sigev_thread_id" = "yes" ; then |
| echo "CONFIG_SIGEV_THREAD_ID=y" >> $config_host_mak |
| fi |
| |
| if test "$spice" = "yes" ; then |
| echo "CONFIG_SPICE=y" >> $config_host_mak |
| fi |
| |
| if test "$smartcard_nss" = "yes" ; then |
| echo "CONFIG_SMARTCARD_NSS=y" >> $config_host_mak |
| echo "NSS_LIBS=$nss_libs" >> $config_host_mak |
| echo "NSS_CFLAGS=$nss_cflags" >> $config_host_mak |
| fi |
| |
| if test "$libusb" = "yes" ; then |
| echo "CONFIG_USB_LIBUSB=y" >> $config_host_mak |
| fi |
| |
| if test "$usb_redir" = "yes" ; then |
| echo "CONFIG_USB_REDIR=y" >> $config_host_mak |
| fi |
| |
| if test "$opengl" = "yes" ; then |
| echo "CONFIG_OPENGL=y" >> $config_host_mak |
| echo "OPENGL_CFLAGS=$opengl_cflags" >> $config_host_mak |
| echo "OPENGL_LIBS=$opengl_libs" >> $config_host_mak |
| fi |
| |
| if test "$lzo" = "yes" ; then |
| echo "CONFIG_LZO=y" >> $config_host_mak |
| fi |
| |
| if test "$snappy" = "yes" ; then |
| echo "CONFIG_SNAPPY=y" >> $config_host_mak |
| fi |
| |
| if test "$bzip2" = "yes" ; then |
| echo "CONFIG_BZIP2=y" >> $config_host_mak |
| echo "BZIP2_LIBS=-lbz2" >> $config_host_mak |
| fi |
| |
| if test "$libiscsi" = "yes" ; then |
| echo "CONFIG_LIBISCSI=m" >> $config_host_mak |
| echo "LIBISCSI_CFLAGS=$libiscsi_cflags" >> $config_host_mak |
| echo "LIBISCSI_LIBS=$libiscsi_libs" >> $config_host_mak |
| fi |
| |
| if test "$libnfs" = "yes" ; then |
| echo "CONFIG_LIBNFS=y" >> $config_host_mak |
| fi |
| |
| if test "$seccomp" = "yes"; then |
| echo "CONFIG_SECCOMP=y" >> $config_host_mak |
| fi |
| |
| # XXX: suppress that |
| if [ "$bsd" = "yes" ] ; then |
| echo "CONFIG_BSD=y" >> $config_host_mak |
| fi |
| |
| if test "$zero_malloc" = "yes" ; then |
| echo "CONFIG_ZERO_MALLOC=y" >> $config_host_mak |
| fi |
| if test "$qom_cast_debug" = "yes" ; then |
| echo "CONFIG_QOM_CAST_DEBUG=y" >> $config_host_mak |
| fi |
| if test "$rbd" = "yes" ; then |
| echo "CONFIG_RBD=m" >> $config_host_mak |
| echo "RBD_CFLAGS=$rbd_cflags" >> $config_host_mak |
| echo "RBD_LIBS=$rbd_libs" >> $config_host_mak |
| fi |
| |
| echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak |
| if test "$coroutine_pool" = "yes" ; then |
| echo "CONFIG_COROUTINE_POOL=1" >> $config_host_mak |
| else |
| echo "CONFIG_COROUTINE_POOL=0" >> $config_host_mak |
| fi |
| |
| if test "$open_by_handle_at" = "yes" ; then |
| echo "CONFIG_OPEN_BY_HANDLE=y" >> $config_host_mak |
| fi |
| |
| if test "$linux_magic_h" = "yes" ; then |
| echo "CONFIG_LINUX_MAGIC_H=y" >> $config_host_mak |
| fi |
| |
| if test "$pragma_diagnostic_available" = "yes" ; then |
| echo "CONFIG_PRAGMA_DIAGNOSTIC_AVAILABLE=y" >> $config_host_mak |
| fi |
| |
| if test "$valgrind_h" = "yes" ; then |
| echo "CONFIG_VALGRIND_H=y" >> $config_host_mak |
| fi |
| |
| if test "$has_environ" = "yes" ; then |
| echo "CONFIG_HAS_ENVIRON=y" >> $config_host_mak |
| fi |
| |
| if test "$cpuid_h" = "yes" ; then |
| echo "CONFIG_CPUID_H=y" >> $config_host_mak |
| fi |
| |
| if test "$int128" = "yes" ; then |
| echo "CONFIG_INT128=y" >> $config_host_mak |
| fi |
| |
| if test "$getauxval" = "yes" ; then |
| echo "CONFIG_GETAUXVAL=y" >> $config_host_mak |
| fi |
| |
| if test "$glusterfs" = "yes" ; then |
| echo "CONFIG_GLUSTERFS=m" >> $config_host_mak |
| echo "GLUSTERFS_CFLAGS=$glusterfs_cflags" >> $config_host_mak |
| echo "GLUSTERFS_LIBS=$glusterfs_libs" >> $config_host_mak |
| fi |
| |
| if test "$glusterfs_discard" = "yes" ; then |
| echo "CONFIG_GLUSTERFS_DISCARD=y" >> $config_host_mak |
| fi |
| |
| if test "$glusterfs_zerofill" = "yes" ; then |
| echo "CONFIG_GLUSTERFS_ZEROFILL=y" >> $config_host_mak |
| fi |
| |
| if test "$archipelago" = "yes" ; then |
| echo "CONFIG_ARCHIPELAGO=m" >> $config_host_mak |
| echo "ARCHIPELAGO_LIBS=$archipelago_libs" >> $config_host_mak |
| fi |
| |
| if test "$libssh2" = "yes" ; then |
| echo "CONFIG_LIBSSH2=m" >> $config_host_mak |
| echo "LIBSSH2_CFLAGS=$libssh2_cflags" >> $config_host_mak |
| echo "LIBSSH2_LIBS=$libssh2_libs" >> $config_host_mak |
| fi |
| |
| if test "$quorum" = "yes" ; then |
| echo "CONFIG_QUORUM=y" >> $config_host_mak |
| fi |
| |
| if test "$vhdx" = "yes" ; then |
| echo "CONFIG_VHDX=y" >> $config_host_mak |
| fi |
| |
| # USB host support |
| if test "$libusb" = "yes"; then |
| echo "HOST_USB=libusb legacy" >> $config_host_mak |
| else |
| echo "HOST_USB=stub" >> $config_host_mak |
| fi |
| |
| # TPM passthrough support? |
| if test "$tpm" = "yes"; then |
| echo 'CONFIG_TPM=$(CONFIG_SOFTMMU)' >> $config_host_mak |
| if test "$tpm_passthrough" = "yes"; then |
| echo "CONFIG_TPM_PASSTHROUGH=y" >> $config_host_mak |
| fi |
| fi |
| |
| echo "TRACE_BACKENDS=$trace_backends" >> $config_host_mak |
| if have_backend "nop"; then |
| echo "CONFIG_TRACE_NOP=y" >> $config_host_mak |
| fi |
| if have_backend "simple"; then |
| echo "CONFIG_TRACE_SIMPLE=y" >> $config_host_mak |
| # Set the appropriate trace file. |
| trace_file="\"$trace_file-\" FMT_pid" |
| fi |
| if have_backend "stderr"; then |
| echo "CONFIG_TRACE_STDERR=y" >> $config_host_mak |
| fi |
| if have_backend "ust"; then |
| echo "CONFIG_TRACE_UST=y" >> $config_host_mak |
| fi |
| if have_backend "dtrace"; then |
| echo "CONFIG_TRACE_DTRACE=y" >> $config_host_mak |
| if test "$trace_backend_stap" = "yes" ; then |
| echo "CONFIG_TRACE_SYSTEMTAP=y" >> $config_host_mak |
| fi |
| fi |
| if have_backend "ftrace"; then |
| if test "$linux" = "yes" ; then |
| echo "CONFIG_TRACE_FTRACE=y" >> $config_host_mak |
| else |
| feature_not_found "ftrace(trace backend)" "ftrace requires Linux" |
| fi |
| fi |
| echo "CONFIG_TRACE_FILE=$trace_file" >> $config_host_mak |
| |
| if test "$rdma" = "yes" ; then |
| echo "CONFIG_RDMA=y" >> $config_host_mak |
| fi |
| |
| # Hold two types of flag: |
| # CONFIG_THREAD_SETNAME_BYTHREAD - we've got a way of setting the name on |
| # a thread we have a handle to |
| # CONFIG_PTHREAD_SETNAME_NP - A way of doing it on a particular |
| # platform |
| if test "$pthread_setname_np" = "yes" ; then |
| echo "CONFIG_THREAD_SETNAME_BYTHREAD=y" >> $config_host_mak |
| echo "CONFIG_PTHREAD_SETNAME_NP=y" >> $config_host_mak |
| fi |
| |
| if test "$tcg_interpreter" = "yes"; then |
| QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/tci $QEMU_INCLUDES" |
| elif test "$ARCH" = "sparc64" ; then |
| QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/sparc $QEMU_INCLUDES" |
| elif test "$ARCH" = "s390x" ; then |
| QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/s390 $QEMU_INCLUDES" |
| elif test "$ARCH" = "x86_64" -o "$ARCH" = "x32" ; then |
| QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/i386 $QEMU_INCLUDES" |
| elif test "$ARCH" = "ppc64" ; then |
| QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/ppc $QEMU_INCLUDES" |
| else |
| QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/\$(ARCH) $QEMU_INCLUDES" |
| fi |
| QEMU_INCLUDES="-I\$(SRC_PATH)/tcg $QEMU_INCLUDES" |
| |
| echo "TOOLS=$tools" >> $config_host_mak |
| echo "ROMS=$roms" >> $config_host_mak |
| echo "MAKE=$make" >> $config_host_mak |
| echo "INSTALL=$install" >> $config_host_mak |
| echo "INSTALL_DIR=$install -d -m 0755" >> $config_host_mak |
| echo "INSTALL_DATA=$install -c -m 0644" >> $config_host_mak |
| if test -n "$libtool"; then |
| echo "INSTALL_PROG=\$(LIBTOOL) --mode=install $install -c -m 0755" >> $config_host_mak |
| echo "INSTALL_LIB=\$(LIBTOOL) --mode=install $install -c -m 0644" >> $config_host_mak |
| else |
| echo "INSTALL_PROG=$install -c -m 0755" >> $config_host_mak |
| echo "INSTALL_LIB=$install -c -m 0644" >> $config_host_mak |
| fi |
| echo "PYTHON=$python" >> $config_host_mak |
| echo "CC=$cc" >> $config_host_mak |
| if $iasl -h > /dev/null 2>&1; then |
| echo "IASL=$iasl" >> $config_host_mak |
| fi |
| echo "CC_I386=$cc_i386" >> $config_host_mak |
| echo "HOST_CC=$host_cc" >> $config_host_mak |
| echo "CXX=$cxx" >> $config_host_mak |
| echo "OBJCC=$objcc" >> $config_host_mak |
| echo "AR=$ar" >> $config_host_mak |
| echo "ARFLAGS=$ARFLAGS" >> $config_host_mak |
| echo "AS=$as" >> $config_host_mak |
| echo "CPP=$cpp" >> $config_host_mak |
| echo "OBJCOPY=$objcopy" >> $config_host_mak |
| echo "LD=$ld" >> $config_host_mak |
| echo "NM=$nm" >> $config_host_mak |
| echo "WINDRES=$windres" >> $config_host_mak |
| echo "LIBTOOL=$libtool" >> $config_host_mak |
| echo "CFLAGS=$CFLAGS" >> $config_host_mak |
| echo "CFLAGS_NOPIE=$CFLAGS_NOPIE" >> $config_host_mak |
| echo "QEMU_CFLAGS=$QEMU_CFLAGS" >> $config_host_mak |
| echo "QEMU_INCLUDES=$QEMU_INCLUDES" >> $config_host_mak |
| if test "$sparse" = "yes" ; then |
| echo "CC := REAL_CC=\"\$(CC)\" cgcc" >> $config_host_mak |
| echo "CPP := REAL_CC=\"\$(CPP)\" cgcc" >> $config_host_mak |
| echo "CXX := REAL_CC=\"\$(CXX)\" cgcc" >> $config_host_mak |
| echo "HOST_CC := REAL_CC=\"\$(HOST_CC)\" cgcc" >> $config_host_mak |
| echo "QEMU_CFLAGS += -Wbitwise -Wno-transparent-union -Wno-old-initializer -Wno-non-pointer-null" >> $config_host_mak |
| fi |
| if test "$cross_prefix" != ""; then |
| echo "AUTOCONF_HOST := --host=${cross_prefix%-}" >> $config_host_mak |
| else |
| echo "AUTOCONF_HOST := " >> $config_host_mak |
| fi |
| echo "LDFLAGS=$LDFLAGS" >> $config_host_mak |
| echo "LDFLAGS_NOPIE=$LDFLAGS_NOPIE" >> $config_host_mak |
| echo "LIBTOOLFLAGS=$LIBTOOLFLAGS" >> $config_host_mak |
| echo "LIBS+=$LIBS" >> $config_host_mak |
| echo "LIBS_TOOLS+=$libs_tools" >> $config_host_mak |
| echo "EXESUF=$EXESUF" >> $config_host_mak |
| echo "DSOSUF=$DSOSUF" >> $config_host_mak |
| echo "LDFLAGS_SHARED=$LDFLAGS_SHARED" >> $config_host_mak |
| echo "LIBS_QGA+=$libs_qga" >> $config_host_mak |
| echo "POD2MAN=$POD2MAN" >> $config_host_mak |
| echo "TRANSLATE_OPT_CFLAGS=$TRANSLATE_OPT_CFLAGS" >> $config_host_mak |
| if test "$gcov" = "yes" ; then |
| echo "CONFIG_GCOV=y" >> $config_host_mak |
| echo "GCOV=$gcov_tool" >> $config_host_mak |
| fi |
| |
| # use included Linux headers |
| if test "$linux" = "yes" ; then |
| mkdir -p linux-headers |
| case "$cpu" in |
| i386|x86_64|x32) |
| linux_arch=x86 |
| ;; |
| ppcemb|ppc|ppc64) |
| linux_arch=powerpc |
| ;; |
| s390x) |
| linux_arch=s390 |
| ;; |
| aarch64) |
| linux_arch=arm64 |
| ;; |
| mips64) |
| linux_arch=mips |
| ;; |
| *) |
| # For most CPUs the kernel architecture name and QEMU CPU name match. |
| linux_arch="$cpu" |
| ;; |
| esac |
| # For non-KVM architectures we will not have asm headers |
| if [ -e "$source_path/linux-headers/asm-$linux_arch" ]; then |
| symlink "$source_path/linux-headers/asm-$linux_arch" linux-headers/asm |
| fi |
| fi |
| |
| for target in $target_list; do |
| target_dir="$target" |
| config_target_mak=$target_dir/config-target.mak |
| target_name=`echo $target | cut -d '-' -f 1` |
| target_bigendian="no" |
| |
| case "$target_name" in |
| armeb|lm32|m68k|microblaze|mips|mipsn32|mips64|moxie|or32|ppc|ppcemb|ppc64|ppc64abi32|s390x|sh4eb|sparc|sparc64|sparc32plus|xtensaeb) |
| target_bigendian=yes |
| ;; |
| esac |
| target_softmmu="no" |
| target_user_only="no" |
| target_linux_user="no" |
| target_bsd_user="no" |
| case "$target" in |
| ${target_name}-softmmu) |
| target_softmmu="yes" |
| ;; |
| ${target_name}-linux-user) |
| if test "$linux" != "yes" ; then |
| error_exit "Target '$target' is only available on a Linux host" |
| fi |
| target_user_only="yes" |
| target_linux_user="yes" |
| ;; |
| ${target_name}-bsd-user) |
| if test "$bsd" != "yes" ; then |
| error_exit "Target '$target' is only available on a BSD host" |
| fi |
| target_user_only="yes" |
| target_bsd_user="yes" |
| ;; |
| *) |
| error_exit "Target '$target' not recognised" |
| exit 1 |
| ;; |
| esac |
| |
| mkdir -p $target_dir |
| echo "# Automatically generated by configure - do not modify" > $config_target_mak |
| |
| bflt="no" |
| interp_prefix1=`echo "$interp_prefix" | sed "s/%M/$target_name/g"` |
| gdb_xml_files="" |
| |
| TARGET_ARCH="$target_name" |
| TARGET_BASE_ARCH="" |
| TARGET_ABI_DIR="" |
| |
| case "$target_name" in |
| i386) |
| ;; |
| x86_64) |
| TARGET_BASE_ARCH=i386 |
| ;; |
| alpha) |
| ;; |
| arm|armeb) |
| TARGET_ARCH=arm |
| bflt="yes" |
| gdb_xml_files="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml" |
| ;; |
| aarch64) |
| TARGET_BASE_ARCH=arm |
| bflt="yes" |
| gdb_xml_files="aarch64-core.xml aarch64-fpu.xml arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml" |
| ;; |
| cris) |
| ;; |
| lm32) |
| ;; |
| m68k) |
| bflt="yes" |
| gdb_xml_files="cf-core.xml cf-fp.xml" |
| ;; |
| microblaze|microblazeel) |
| TARGET_ARCH=microblaze |
| bflt="yes" |
| ;; |
| mips|mipsel) |
| TARGET_ARCH=mips |
| echo "TARGET_ABI_MIPSO32=y" >> $config_target_mak |
| ;; |
| mipsn32|mipsn32el) |
| TARGET_ARCH=mips64 |
| TARGET_BASE_ARCH=mips |
| echo "TARGET_ABI_MIPSN32=y" >> $config_target_mak |
| echo "TARGET_ABI32=y" >> $config_target_mak |
| ;; |
| mips64|mips64el) |
| TARGET_ARCH=mips64 |
| TARGET_BASE_ARCH=mips |
| echo "TARGET_ABI_MIPSN64=y" >> $config_target_mak |
| ;; |
| moxie) |
| ;; |
| or32) |
| TARGET_ARCH=openrisc |
| TARGET_BASE_ARCH=openrisc |
| ;; |
| ppc) |
| gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml" |
| ;; |
| ppcemb) |
| TARGET_BASE_ARCH=ppc |
| TARGET_ABI_DIR=ppc |
| gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml" |
| ;; |
| ppc64) |
| TARGET_BASE_ARCH=ppc |
| TARGET_ABI_DIR=ppc |
| gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml" |
| ;; |
| ppc64le) |
| TARGET_ARCH=ppc64 |
| TARGET_BASE_ARCH=ppc |
| TARGET_ABI_DIR=ppc |
| gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml" |
| ;; |
| ppc64abi32) |
| TARGET_ARCH=ppc64 |
| TARGET_BASE_ARCH=ppc |
| TARGET_ABI_DIR=ppc |
| echo "TARGET_ABI32=y" >> $config_target_mak |
| gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml" |
| ;; |
| sh4|sh4eb) |
| TARGET_ARCH=sh4 |
| bflt="yes" |
| ;; |
| sparc) |
| ;; |
| sparc64) |
| TARGET_BASE_ARCH=sparc |
| ;; |
| sparc32plus) |
| TARGET_ARCH=sparc64 |
| TARGET_BASE_ARCH=sparc |
| TARGET_ABI_DIR=sparc |
| echo "TARGET_ABI32=y" >> $config_target_mak |
| ;; |
| s390x) |
| gdb_xml_files="s390x-core64.xml s390-acr.xml s390-fpr.xml" |
| ;; |
| tricore) |
| ;; |
| unicore32) |
| ;; |
| xtensa|xtensaeb) |
| TARGET_ARCH=xtensa |
| ;; |
| *) |
| error_exit "Unsupported target CPU" |
| ;; |
| esac |
| # TARGET_BASE_ARCH needs to be defined after TARGET_ARCH |
| if [ "$TARGET_BASE_ARCH" = "" ]; then |
| TARGET_BASE_ARCH=$TARGET_ARCH |
| fi |
| |
| symlink "$source_path/Makefile.target" "$target_dir/Makefile" |
| |
| upper() { |
| echo "$@"| LC_ALL=C tr '[a-z]' '[A-Z]' |
| } |
| |
| target_arch_name="`upper $TARGET_ARCH`" |
| echo "TARGET_$target_arch_name=y" >> $config_target_mak |
| echo "TARGET_NAME=$target_name" >> $config_target_mak |
| echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_target_mak |
| if [ "$TARGET_ABI_DIR" = "" ]; then |
| TARGET_ABI_DIR=$TARGET_ARCH |
| fi |
| echo "TARGET_ABI_DIR=$TARGET_ABI_DIR" >> $config_target_mak |
| if [ "$HOST_VARIANT_DIR" != "" ]; then |
| echo "HOST_VARIANT_DIR=$HOST_VARIANT_DIR" >> $config_target_mak |
| fi |
| case "$target_name" in |
| i386|x86_64) |
| if test "$xen" = "yes" -a "$target_softmmu" = "yes" ; then |
| echo "CONFIG_XEN=y" >> $config_target_mak |
| if test "$xen_pci_passthrough" = yes; then |
| echo "CONFIG_XEN_PCI_PASSTHROUGH=y" >> "$config_target_mak" |
| fi |
| fi |
| ;; |
| *) |
| esac |
| case "$target_name" in |
| aarch64|arm|i386|x86_64|ppcemb|ppc|ppc64|s390x|mipsel|mips) |
| # Make sure the target and host cpus are compatible |
| if test "$kvm" = "yes" -a "$target_softmmu" = "yes" -a \ |
| \( "$target_name" = "$cpu" -o \ |
| \( "$target_name" = "ppcemb" -a "$cpu" = "ppc" \) -o \ |
| \( "$target_name" = "ppc64" -a "$cpu" = "ppc" \) -o \ |
| \( "$target_name" = "ppc" -a "$cpu" = "ppc64" \) -o \ |
| \( "$target_name" = "ppcemb" -a "$cpu" = "ppc64" \) -o \ |
| \( "$target_name" = "mipsel" -a "$cpu" = "mips" \) -o \ |
| \( "$target_name" = "x86_64" -a "$cpu" = "i386" \) -o \ |
| \( "$target_name" = "i386" -a "$cpu" = "x86_64" \) -o \ |
| \( "$target_name" = "x86_64" -a "$cpu" = "x32" \) -o \ |
| \( "$target_name" = "i386" -a "$cpu" = "x32" \) \) ; then |
| echo "CONFIG_KVM=y" >> $config_target_mak |
| if test "$vhost_net" = "yes" ; then |
| echo "CONFIG_VHOST_NET=y" >> $config_target_mak |
| fi |
| fi |
| esac |
| if test "$target_bigendian" = "yes" ; then |
| echo "TARGET_WORDS_BIGENDIAN=y" >> $config_target_mak |
| fi |
| if test "$target_softmmu" = "yes" ; then |
| echo "CONFIG_SOFTMMU=y" >> $config_target_mak |
| fi |
| if test "$target_user_only" = "yes" ; then |
| echo "CONFIG_USER_ONLY=y" >> $config_target_mak |
| echo "CONFIG_QEMU_INTERP_PREFIX=\"$interp_prefix1\"" >> $config_target_mak |
| fi |
| if test "$target_linux_user" = "yes" ; then |
| echo "CONFIG_LINUX_USER=y" >> $config_target_mak |
| fi |
| list="" |
| if test ! -z "$gdb_xml_files" ; then |
| for x in $gdb_xml_files; do |
| list="$list $source_path/gdb-xml/$x" |
| done |
| echo "TARGET_XML_FILES=$list" >> $config_target_mak |
| fi |
| |
| if test "$target_user_only" = "yes" -a "$bflt" = "yes"; then |
| echo "TARGET_HAS_BFLT=y" >> $config_target_mak |
| fi |
| if test "$target_user_only" = "yes" -a "$guest_base" = "yes"; then |
| echo "CONFIG_USE_GUEST_BASE=y" >> $config_target_mak |
| fi |
| if test "$target_bsd_user" = "yes" ; then |
| echo "CONFIG_BSD_USER=y" >> $config_target_mak |
| fi |
| |
| # generate QEMU_CFLAGS/LDFLAGS for targets |
| |
| cflags="" |
| ldflags="" |
| |
| for i in $ARCH $TARGET_BASE_ARCH ; do |
| case "$i" in |
| alpha) |
| echo "CONFIG_ALPHA_DIS=y" >> $config_target_mak |
| echo "CONFIG_ALPHA_DIS=y" >> config-all-disas.mak |
| ;; |
| aarch64) |
| if test -n "${cxx}"; then |
| echo "CONFIG_ARM_A64_DIS=y" >> $config_target_mak |
| echo "CONFIG_ARM_A64_DIS=y" >> config-all-disas.mak |
| fi |
| ;; |
| arm) |
| echo "CONFIG_ARM_DIS=y" >> $config_target_mak |
| echo "CONFIG_ARM_DIS=y" >> config-all-disas.mak |
| if test -n "${cxx}"; then |
| echo "CONFIG_ARM_A64_DIS=y" >> $config_target_mak |
| echo "CONFIG_ARM_A64_DIS=y" >> config-all-disas.mak |
| fi |
| ;; |
| cris) |
| echo "CONFIG_CRIS_DIS=y" >> $config_target_mak |
| echo "CONFIG_CRIS_DIS=y" >> config-all-disas.mak |
| ;; |
| hppa) |
| echo "CONFIG_HPPA_DIS=y" >> $config_target_mak |
| echo "CONFIG_HPPA_DIS=y" >> config-all-disas.mak |
| ;; |
| i386|x86_64|x32) |
| echo "CONFIG_I386_DIS=y" >> $config_target_mak |
| echo "CONFIG_I386_DIS=y" >> config-all-disas.mak |
| ;; |
| ia64*) |
| echo "CONFIG_IA64_DIS=y" >> $config_target_mak |
| echo "CONFIG_IA64_DIS=y" >> config-all-disas.mak |
| ;; |
| lm32) |
| echo "CONFIG_LM32_DIS=y" >> $config_target_mak |
| echo "CONFIG_LM32_DIS=y" >> config-all-disas.mak |
| ;; |
| m68k) |
| echo "CONFIG_M68K_DIS=y" >> $config_target_mak |
| echo "CONFIG_M68K_DIS=y" >> config-all-disas.mak |
| ;; |
| microblaze*) |
| echo "CONFIG_MICROBLAZE_DIS=y" >> $config_target_mak |
| echo "CONFIG_MICROBLAZE_DIS=y" >> config-all-disas.mak |
| ;; |
| mips*) |
| echo "CONFIG_MIPS_DIS=y" >> $config_target_mak |
| echo "CONFIG_MIPS_DIS=y" >> config-all-disas.mak |
| ;; |
| moxie*) |
| echo "CONFIG_MOXIE_DIS=y" >> $config_target_mak |
| echo "CONFIG_MOXIE_DIS=y" >> config-all-disas.mak |
| ;; |
| or32) |
| echo "CONFIG_OPENRISC_DIS=y" >> $config_target_mak |
| echo "CONFIG_OPENRISC_DIS=y" >> config-all-disas.mak |
| ;; |
| ppc*) |
| echo "CONFIG_PPC_DIS=y" >> $config_target_mak |
| echo "CONFIG_PPC_DIS=y" >> config-all-disas.mak |
| ;; |
| s390*) |
| echo "CONFIG_S390_DIS=y" >> $config_target_mak |
| echo "CONFIG_S390_DIS=y" >> config-all-disas.mak |
| ;; |
| sh4) |
| echo "CONFIG_SH4_DIS=y" >> $config_target_mak |
| echo "CONFIG_SH4_DIS=y" >> config-all-disas.mak |
| ;; |
| sparc*) |
| echo "CONFIG_SPARC_DIS=y" >> $config_target_mak |
| echo "CONFIG_SPARC_DIS=y" >> config-all-disas.mak |
| ;; |
| xtensa*) |
| echo "CONFIG_XTENSA_DIS=y" >> $config_target_mak |
| echo "CONFIG_XTENSA_DIS=y" >> config-all-disas.mak |
| ;; |
| esac |
| done |
| if test "$tcg_interpreter" = "yes" ; then |
| echo "CONFIG_TCI_DIS=y" >> $config_target_mak |
| echo "CONFIG_TCI_DIS=y" >> config-all-disas.mak |
| fi |
| |
| case "$ARCH" in |
| alpha) |
| # Ensure there's only a single GP |
| cflags="-msmall-data $cflags" |
| ;; |
| esac |
| |
| if test "$gprof" = "yes" ; then |
| echo "TARGET_GPROF=yes" >> $config_target_mak |
| if test "$target_linux_user" = "yes" ; then |
| cflags="-p $cflags" |
| ldflags="-p $ldflags" |
| fi |
| if test "$target_softmmu" = "yes" ; then |
| ldflags="-p $ldflags" |
| echo "GPROF_CFLAGS=-p" >> $config_target_mak |
| fi |
| fi |
| |
| if test "$target_linux_user" = "yes" -o "$target_bsd_user" = "yes" ; then |
| ldflags="$ldflags $textseg_ldflags" |
| fi |
| |
| echo "LDFLAGS+=$ldflags" >> $config_target_mak |
| echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak |
| |
| done # for target in $targets |
| |
| if [ "$pixman" = "internal" ]; then |
| echo "config-host.h: subdir-pixman" >> $config_host_mak |
| fi |
| |
| if test "$rdma" = "yes" ; then |
| echo "CONFIG_RDMA=y" >> $config_host_mak |
| fi |
| |
| if [ "$dtc_internal" = "yes" ]; then |
| echo "config-host.h: subdir-dtc" >> $config_host_mak |
| fi |
| |
| if test "$numa" = "yes"; then |
| echo "CONFIG_NUMA=y" >> $config_host_mak |
| fi |
| |
| # build tree in object directory in case the source is not in the current directory |
| DIRS="tests tests/tcg tests/tcg/cris tests/tcg/lm32 tests/libqos tests/qapi-schema tests/tcg/xtensa tests/qemu-iotests" |
| DIRS="$DIRS fsdev" |
| DIRS="$DIRS pc-bios/optionrom pc-bios/spapr-rtas pc-bios/s390-ccw" |
| DIRS="$DIRS roms/seabios roms/vgabios" |
| DIRS="$DIRS qapi-generated" |
| FILES="Makefile tests/tcg/Makefile qdict-test-data.txt" |
| FILES="$FILES tests/tcg/cris/Makefile tests/tcg/cris/.gdbinit" |
| FILES="$FILES tests/tcg/lm32/Makefile tests/tcg/xtensa/Makefile po/Makefile" |
| FILES="$FILES pc-bios/optionrom/Makefile pc-bios/keymaps" |
| FILES="$FILES pc-bios/spapr-rtas/Makefile" |
| FILES="$FILES pc-bios/s390-ccw/Makefile" |
| FILES="$FILES roms/seabios/Makefile roms/vgabios/Makefile" |
| FILES="$FILES pc-bios/qemu-icon.bmp" |
| for bios_file in \ |
| $source_path/pc-bios/*.bin \ |
| $source_path/pc-bios/*.aml \ |
| $source_path/pc-bios/*.rom \ |
| $source_path/pc-bios/*.dtb \ |
| $source_path/pc-bios/*.img \ |
| $source_path/pc-bios/openbios-* \ |
| $source_path/pc-bios/u-boot.* \ |
| $source_path/pc-bios/palcode-* |
| do |
| FILES="$FILES pc-bios/`basename $bios_file`" |
| done |
| for test_file in `find $source_path/tests/acpi-test-data -type f` |
| do |
| FILES="$FILES tests/acpi-test-data`echo $test_file | sed -e 's/.*acpi-test-data//'`" |
| done |
| mkdir -p $DIRS |
| for f in $FILES ; do |
| if [ -e "$source_path/$f" ] && [ "$pwd_is_source_path" != "y" ]; then |
| symlink "$source_path/$f" "$f" |
| fi |
| done |
| |
| # temporary config to build submodules |
| for rom in seabios vgabios ; do |
| config_mak=roms/$rom/config.mak |
| echo "# Automatically generated by configure - do not modify" > $config_mak |
| echo "SRC_PATH=$source_path/roms/$rom" >> $config_mak |
| echo "AS=$as" >> $config_mak |
| echo "CC=$cc" >> $config_mak |
| echo "BCC=bcc" >> $config_mak |
| echo "CPP=$cpp" >> $config_mak |
| echo "OBJCOPY=objcopy" >> $config_mak |
| echo "IASL=$iasl" >> $config_mak |
| echo "LD=$ld" >> $config_mak |
| done |
| |
| # set up qemu-iotests in this build directory |
| iotests_common_env="tests/qemu-iotests/common.env" |
| iotests_check="tests/qemu-iotests/check" |
| |
| echo "# Automatically generated by configure - do not modify" > "$iotests_common_env" |
| echo >> "$iotests_common_env" |
| echo "export PYTHON='$python'" >> "$iotests_common_env" |
| |
| if [ ! -e "$iotests_check" ]; then |
| symlink "$source_path/$iotests_check" "$iotests_check" |
| fi |
| |
| # Save the configure command line for later reuse. |
| cat <<EOD >config.status |
| #!/bin/sh |
| # Generated by configure. |
| # Run this file to recreate the current configuration. |
| # Compiler output produced by configure, useful for debugging |
| # configure, is in config.log if it exists. |
| EOD |
| printf "exec" >>config.status |
| printf " '%s'" "$0" "$@" >>config.status |
| echo >>config.status |
| chmod +x config.status |
| |
| rm -r "$TMPDIR1" |
