| /* |
| * Migration support for VFIO devices |
| * |
| * Copyright NVIDIA, Inc. 2020 |
| * |
| * This work is licensed under the terms of the GNU GPL, version 2. See |
| * the COPYING file in the top-level directory. |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/main-loop.h" |
| #include "qemu/cutils.h" |
| #include "qemu/units.h" |
| #include "qemu/error-report.h" |
| #include <linux/vfio.h> |
| #include <sys/ioctl.h> |
| |
| #include "sysemu/runstate.h" |
| #include "hw/vfio/vfio-common.h" |
| #include "migration/migration.h" |
| #include "migration/options.h" |
| #include "migration/savevm.h" |
| #include "migration/vmstate.h" |
| #include "migration/qemu-file.h" |
| #include "migration/register.h" |
| #include "migration/blocker.h" |
| #include "migration/misc.h" |
| #include "qapi/error.h" |
| #include "exec/ramlist.h" |
| #include "exec/ram_addr.h" |
| #include "pci.h" |
| #include "trace.h" |
| #include "hw/hw.h" |
| |
| /* |
| * Flags to be used as unique delimiters for VFIO devices in the migration |
| * stream. These flags are composed as: |
| * 0xffffffff => MSB 32-bit all 1s |
| * 0xef10 => Magic ID, represents emulated (virtual) function IO |
| * 0x0000 => 16-bits reserved for flags |
| * |
| * The beginning of state information is marked by _DEV_CONFIG_STATE, |
| * _DEV_SETUP_STATE, or _DEV_DATA_STATE, respectively. The end of a |
| * certain state information is marked by _END_OF_STATE. |
| */ |
| #define VFIO_MIG_FLAG_END_OF_STATE (0xffffffffef100001ULL) |
| #define VFIO_MIG_FLAG_DEV_CONFIG_STATE (0xffffffffef100002ULL) |
| #define VFIO_MIG_FLAG_DEV_SETUP_STATE (0xffffffffef100003ULL) |
| #define VFIO_MIG_FLAG_DEV_DATA_STATE (0xffffffffef100004ULL) |
| #define VFIO_MIG_FLAG_DEV_INIT_DATA_SENT (0xffffffffef100005ULL) |
| |
| /* |
| * This is an arbitrary size based on migration of mlx5 devices, where typically |
| * total device migration size is on the order of 100s of MB. Testing with |
| * larger values, e.g. 128MB and 1GB, did not show a performance improvement. |
| */ |
| #define VFIO_MIG_DEFAULT_DATA_BUFFER_SIZE (1 * MiB) |
| |
| static int64_t bytes_transferred; |
| |
| static const char *mig_state_to_str(enum vfio_device_mig_state state) |
| { |
| switch (state) { |
| case VFIO_DEVICE_STATE_ERROR: |
| return "ERROR"; |
| case VFIO_DEVICE_STATE_STOP: |
| return "STOP"; |
| case VFIO_DEVICE_STATE_RUNNING: |
| return "RUNNING"; |
| case VFIO_DEVICE_STATE_STOP_COPY: |
| return "STOP_COPY"; |
| case VFIO_DEVICE_STATE_RESUMING: |
| return "RESUMING"; |
| case VFIO_DEVICE_STATE_RUNNING_P2P: |
| return "RUNNING_P2P"; |
| case VFIO_DEVICE_STATE_PRE_COPY: |
| return "PRE_COPY"; |
| case VFIO_DEVICE_STATE_PRE_COPY_P2P: |
| return "PRE_COPY_P2P"; |
| default: |
| return "UNKNOWN STATE"; |
| } |
| } |
| |
| static int vfio_migration_set_state(VFIODevice *vbasedev, |
| enum vfio_device_mig_state new_state, |
| enum vfio_device_mig_state recover_state) |
| { |
| VFIOMigration *migration = vbasedev->migration; |
| uint64_t buf[DIV_ROUND_UP(sizeof(struct vfio_device_feature) + |
| sizeof(struct vfio_device_feature_mig_state), |
| sizeof(uint64_t))] = {}; |
| struct vfio_device_feature *feature = (struct vfio_device_feature *)buf; |
| struct vfio_device_feature_mig_state *mig_state = |
| (struct vfio_device_feature_mig_state *)feature->data; |
| int ret; |
| |
| feature->argsz = sizeof(buf); |
| feature->flags = |
| VFIO_DEVICE_FEATURE_SET | VFIO_DEVICE_FEATURE_MIG_DEVICE_STATE; |
| mig_state->device_state = new_state; |
| if (ioctl(vbasedev->fd, VFIO_DEVICE_FEATURE, feature)) { |
| /* Try to set the device in some good state */ |
| ret = -errno; |
| |
| if (recover_state == VFIO_DEVICE_STATE_ERROR) { |
| error_report("%s: Failed setting device state to %s, err: %s. " |
| "Recover state is ERROR. Resetting device", |
| vbasedev->name, mig_state_to_str(new_state), |
| strerror(errno)); |
| |
| goto reset_device; |
| } |
| |
| error_report( |
| "%s: Failed setting device state to %s, err: %s. Setting device in recover state %s", |
| vbasedev->name, mig_state_to_str(new_state), |
| strerror(errno), mig_state_to_str(recover_state)); |
| |
| mig_state->device_state = recover_state; |
| if (ioctl(vbasedev->fd, VFIO_DEVICE_FEATURE, feature)) { |
| ret = -errno; |
| error_report( |
| "%s: Failed setting device in recover state, err: %s. Resetting device", |
| vbasedev->name, strerror(errno)); |
| |
| goto reset_device; |
| } |
| |
| migration->device_state = recover_state; |
| |
| return ret; |
| } |
| |
| migration->device_state = new_state; |
| if (mig_state->data_fd != -1) { |
| if (migration->data_fd != -1) { |
| /* |
| * This can happen if the device is asynchronously reset and |
| * terminates a data transfer. |
| */ |
| error_report("%s: data_fd out of sync", vbasedev->name); |
| close(mig_state->data_fd); |
| |
| return -EBADF; |
| } |
| |
| migration->data_fd = mig_state->data_fd; |
| } |
| |
| trace_vfio_migration_set_state(vbasedev->name, mig_state_to_str(new_state)); |
| |
| return 0; |
| |
| reset_device: |
| if (ioctl(vbasedev->fd, VFIO_DEVICE_RESET)) { |
| hw_error("%s: Failed resetting device, err: %s", vbasedev->name, |
| strerror(errno)); |
| } |
| |
| migration->device_state = VFIO_DEVICE_STATE_RUNNING; |
| |
| return ret; |
| } |
| |
| /* |
| * Some device state transitions require resetting the device if they fail. |
| * This function sets the device in new_state and resets the device if that |
| * fails. Reset is done by using ERROR as the recover state. |
| */ |
| static int |
| vfio_migration_set_state_or_reset(VFIODevice *vbasedev, |
| enum vfio_device_mig_state new_state) |
| { |
| return vfio_migration_set_state(vbasedev, new_state, |
| VFIO_DEVICE_STATE_ERROR); |
| } |
| |
| static int vfio_load_buffer(QEMUFile *f, VFIODevice *vbasedev, |
| uint64_t data_size) |
| { |
| VFIOMigration *migration = vbasedev->migration; |
| int ret; |
| |
| ret = qemu_file_get_to_fd(f, migration->data_fd, data_size); |
| trace_vfio_load_state_device_data(vbasedev->name, data_size, ret); |
| |
| return ret; |
| } |
| |
| static int vfio_save_device_config_state(QEMUFile *f, void *opaque) |
| { |
| VFIODevice *vbasedev = opaque; |
| |
| qemu_put_be64(f, VFIO_MIG_FLAG_DEV_CONFIG_STATE); |
| |
| if (vbasedev->ops && vbasedev->ops->vfio_save_config) { |
| vbasedev->ops->vfio_save_config(vbasedev, f); |
| } |
| |
| qemu_put_be64(f, VFIO_MIG_FLAG_END_OF_STATE); |
| |
| trace_vfio_save_device_config_state(vbasedev->name); |
| |
| return qemu_file_get_error(f); |
| } |
| |
| static int vfio_load_device_config_state(QEMUFile *f, void *opaque) |
| { |
| VFIODevice *vbasedev = opaque; |
| uint64_t data; |
| |
| if (vbasedev->ops && vbasedev->ops->vfio_load_config) { |
| int ret; |
| |
| ret = vbasedev->ops->vfio_load_config(vbasedev, f); |
| if (ret) { |
| error_report("%s: Failed to load device config space", |
| vbasedev->name); |
| return ret; |
| } |
| } |
| |
| data = qemu_get_be64(f); |
| if (data != VFIO_MIG_FLAG_END_OF_STATE) { |
| error_report("%s: Failed loading device config space, " |
| "end flag incorrect 0x%"PRIx64, vbasedev->name, data); |
| return -EINVAL; |
| } |
| |
| trace_vfio_load_device_config_state(vbasedev->name); |
| return qemu_file_get_error(f); |
| } |
| |
| static void vfio_migration_cleanup(VFIODevice *vbasedev) |
| { |
| VFIOMigration *migration = vbasedev->migration; |
| |
| close(migration->data_fd); |
| migration->data_fd = -1; |
| } |
| |
| static int vfio_query_stop_copy_size(VFIODevice *vbasedev, |
| uint64_t *stop_copy_size) |
| { |
| uint64_t buf[DIV_ROUND_UP(sizeof(struct vfio_device_feature) + |
| sizeof(struct vfio_device_feature_mig_data_size), |
| sizeof(uint64_t))] = {}; |
| struct vfio_device_feature *feature = (struct vfio_device_feature *)buf; |
| struct vfio_device_feature_mig_data_size *mig_data_size = |
| (struct vfio_device_feature_mig_data_size *)feature->data; |
| |
| feature->argsz = sizeof(buf); |
| feature->flags = |
| VFIO_DEVICE_FEATURE_GET | VFIO_DEVICE_FEATURE_MIG_DATA_SIZE; |
| |
| if (ioctl(vbasedev->fd, VFIO_DEVICE_FEATURE, feature)) { |
| return -errno; |
| } |
| |
| *stop_copy_size = mig_data_size->stop_copy_length; |
| |
| return 0; |
| } |
| |
| static int vfio_query_precopy_size(VFIOMigration *migration) |
| { |
| struct vfio_precopy_info precopy = { |
| .argsz = sizeof(precopy), |
| }; |
| |
| migration->precopy_init_size = 0; |
| migration->precopy_dirty_size = 0; |
| |
| if (ioctl(migration->data_fd, VFIO_MIG_GET_PRECOPY_INFO, &precopy)) { |
| return -errno; |
| } |
| |
| migration->precopy_init_size = precopy.initial_bytes; |
| migration->precopy_dirty_size = precopy.dirty_bytes; |
| |
| return 0; |
| } |
| |
| /* Returns the size of saved data on success and -errno on error */ |
| static ssize_t vfio_save_block(QEMUFile *f, VFIOMigration *migration) |
| { |
| ssize_t data_size; |
| |
| data_size = read(migration->data_fd, migration->data_buffer, |
| migration->data_buffer_size); |
| if (data_size < 0) { |
| /* |
| * Pre-copy emptied all the device state for now. For more information, |
| * please refer to the Linux kernel VFIO uAPI. |
| */ |
| if (errno == ENOMSG) { |
| return 0; |
| } |
| |
| return -errno; |
| } |
| if (data_size == 0) { |
| return 0; |
| } |
| |
| qemu_put_be64(f, VFIO_MIG_FLAG_DEV_DATA_STATE); |
| qemu_put_be64(f, data_size); |
| qemu_put_buffer(f, migration->data_buffer, data_size); |
| bytes_transferred += data_size; |
| |
| trace_vfio_save_block(migration->vbasedev->name, data_size); |
| |
| return qemu_file_get_error(f) ?: data_size; |
| } |
| |
| static void vfio_update_estimated_pending_data(VFIOMigration *migration, |
| uint64_t data_size) |
| { |
| if (!data_size) { |
| /* |
| * Pre-copy emptied all the device state for now, update estimated sizes |
| * accordingly. |
| */ |
| migration->precopy_init_size = 0; |
| migration->precopy_dirty_size = 0; |
| |
| return; |
| } |
| |
| if (migration->precopy_init_size) { |
| uint64_t init_size = MIN(migration->precopy_init_size, data_size); |
| |
| migration->precopy_init_size -= init_size; |
| data_size -= init_size; |
| } |
| |
| migration->precopy_dirty_size -= MIN(migration->precopy_dirty_size, |
| data_size); |
| } |
| |
| static bool vfio_precopy_supported(VFIODevice *vbasedev) |
| { |
| VFIOMigration *migration = vbasedev->migration; |
| |
| return migration->mig_flags & VFIO_MIGRATION_PRE_COPY; |
| } |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static int vfio_save_prepare(void *opaque, Error **errp) |
| { |
| VFIODevice *vbasedev = opaque; |
| |
| /* |
| * Snapshot doesn't use postcopy nor background snapshot, so allow snapshot |
| * even if they are on. |
| */ |
| if (runstate_check(RUN_STATE_SAVE_VM)) { |
| return 0; |
| } |
| |
| if (migrate_postcopy_ram()) { |
| error_setg( |
| errp, "%s: VFIO migration is not supported with postcopy migration", |
| vbasedev->name); |
| return -EOPNOTSUPP; |
| } |
| |
| if (migrate_background_snapshot()) { |
| error_setg( |
| errp, |
| "%s: VFIO migration is not supported with background snapshot", |
| vbasedev->name); |
| return -EOPNOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static int vfio_save_setup(QEMUFile *f, void *opaque) |
| { |
| VFIODevice *vbasedev = opaque; |
| VFIOMigration *migration = vbasedev->migration; |
| uint64_t stop_copy_size = VFIO_MIG_DEFAULT_DATA_BUFFER_SIZE; |
| |
| qemu_put_be64(f, VFIO_MIG_FLAG_DEV_SETUP_STATE); |
| |
| vfio_query_stop_copy_size(vbasedev, &stop_copy_size); |
| migration->data_buffer_size = MIN(VFIO_MIG_DEFAULT_DATA_BUFFER_SIZE, |
| stop_copy_size); |
| migration->data_buffer = g_try_malloc0(migration->data_buffer_size); |
| if (!migration->data_buffer) { |
| error_report("%s: Failed to allocate migration data buffer", |
| vbasedev->name); |
| return -ENOMEM; |
| } |
| |
| if (vfio_precopy_supported(vbasedev)) { |
| int ret; |
| |
| switch (migration->device_state) { |
| case VFIO_DEVICE_STATE_RUNNING: |
| ret = vfio_migration_set_state(vbasedev, VFIO_DEVICE_STATE_PRE_COPY, |
| VFIO_DEVICE_STATE_RUNNING); |
| if (ret) { |
| return ret; |
| } |
| |
| vfio_query_precopy_size(migration); |
| |
| break; |
| case VFIO_DEVICE_STATE_STOP: |
| /* vfio_save_complete_precopy() will go to STOP_COPY */ |
| break; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| trace_vfio_save_setup(vbasedev->name, migration->data_buffer_size); |
| |
| qemu_put_be64(f, VFIO_MIG_FLAG_END_OF_STATE); |
| |
| return qemu_file_get_error(f); |
| } |
| |
| static void vfio_save_cleanup(void *opaque) |
| { |
| VFIODevice *vbasedev = opaque; |
| VFIOMigration *migration = vbasedev->migration; |
| |
| /* |
| * Changing device state from STOP_COPY to STOP can take time. Do it here, |
| * after migration has completed, so it won't increase downtime. |
| */ |
| if (migration->device_state == VFIO_DEVICE_STATE_STOP_COPY) { |
| vfio_migration_set_state_or_reset(vbasedev, VFIO_DEVICE_STATE_STOP); |
| } |
| |
| g_free(migration->data_buffer); |
| migration->data_buffer = NULL; |
| migration->precopy_init_size = 0; |
| migration->precopy_dirty_size = 0; |
| migration->initial_data_sent = false; |
| vfio_migration_cleanup(vbasedev); |
| trace_vfio_save_cleanup(vbasedev->name); |
| } |
| |
| static void vfio_state_pending_estimate(void *opaque, uint64_t *must_precopy, |
| uint64_t *can_postcopy) |
| { |
| VFIODevice *vbasedev = opaque; |
| VFIOMigration *migration = vbasedev->migration; |
| |
| if (!vfio_device_state_is_precopy(vbasedev)) { |
| return; |
| } |
| |
| *must_precopy += |
| migration->precopy_init_size + migration->precopy_dirty_size; |
| |
| trace_vfio_state_pending_estimate(vbasedev->name, *must_precopy, |
| *can_postcopy, |
| migration->precopy_init_size, |
| migration->precopy_dirty_size); |
| } |
| |
| /* |
| * Migration size of VFIO devices can be as little as a few KBs or as big as |
| * many GBs. This value should be big enough to cover the worst case. |
| */ |
| #define VFIO_MIG_STOP_COPY_SIZE (100 * GiB) |
| |
| static void vfio_state_pending_exact(void *opaque, uint64_t *must_precopy, |
| uint64_t *can_postcopy) |
| { |
| VFIODevice *vbasedev = opaque; |
| VFIOMigration *migration = vbasedev->migration; |
| uint64_t stop_copy_size = VFIO_MIG_STOP_COPY_SIZE; |
| |
| /* |
| * If getting pending migration size fails, VFIO_MIG_STOP_COPY_SIZE is |
| * reported so downtime limit won't be violated. |
| */ |
| vfio_query_stop_copy_size(vbasedev, &stop_copy_size); |
| *must_precopy += stop_copy_size; |
| |
| if (vfio_device_state_is_precopy(vbasedev)) { |
| vfio_query_precopy_size(migration); |
| |
| *must_precopy += |
| migration->precopy_init_size + migration->precopy_dirty_size; |
| } |
| |
| trace_vfio_state_pending_exact(vbasedev->name, *must_precopy, *can_postcopy, |
| stop_copy_size, migration->precopy_init_size, |
| migration->precopy_dirty_size); |
| } |
| |
| static bool vfio_is_active_iterate(void *opaque) |
| { |
| VFIODevice *vbasedev = opaque; |
| |
| return vfio_device_state_is_precopy(vbasedev); |
| } |
| |
| static int vfio_save_iterate(QEMUFile *f, void *opaque) |
| { |
| VFIODevice *vbasedev = opaque; |
| VFIOMigration *migration = vbasedev->migration; |
| ssize_t data_size; |
| |
| data_size = vfio_save_block(f, migration); |
| if (data_size < 0) { |
| return data_size; |
| } |
| |
| vfio_update_estimated_pending_data(migration, data_size); |
| |
| if (migrate_switchover_ack() && !migration->precopy_init_size && |
| !migration->initial_data_sent) { |
| qemu_put_be64(f, VFIO_MIG_FLAG_DEV_INIT_DATA_SENT); |
| migration->initial_data_sent = true; |
| } else { |
| qemu_put_be64(f, VFIO_MIG_FLAG_END_OF_STATE); |
| } |
| |
| trace_vfio_save_iterate(vbasedev->name, migration->precopy_init_size, |
| migration->precopy_dirty_size); |
| |
| /* |
| * A VFIO device's pre-copy dirty_bytes is not guaranteed to reach zero. |
| * Return 1 so following handlers will not be potentially blocked. |
| */ |
| return 1; |
| } |
| |
| static int vfio_save_complete_precopy(QEMUFile *f, void *opaque) |
| { |
| VFIODevice *vbasedev = opaque; |
| ssize_t data_size; |
| int ret; |
| |
| /* We reach here with device state STOP or STOP_COPY only */ |
| ret = vfio_migration_set_state(vbasedev, VFIO_DEVICE_STATE_STOP_COPY, |
| VFIO_DEVICE_STATE_STOP); |
| if (ret) { |
| return ret; |
| } |
| |
| do { |
| data_size = vfio_save_block(f, vbasedev->migration); |
| if (data_size < 0) { |
| return data_size; |
| } |
| } while (data_size); |
| |
| qemu_put_be64(f, VFIO_MIG_FLAG_END_OF_STATE); |
| ret = qemu_file_get_error(f); |
| if (ret) { |
| return ret; |
| } |
| |
| trace_vfio_save_complete_precopy(vbasedev->name, ret); |
| |
| return ret; |
| } |
| |
| static void vfio_save_state(QEMUFile *f, void *opaque) |
| { |
| VFIODevice *vbasedev = opaque; |
| int ret; |
| |
| ret = vfio_save_device_config_state(f, opaque); |
| if (ret) { |
| error_report("%s: Failed to save device config space", |
| vbasedev->name); |
| qemu_file_set_error(f, ret); |
| } |
| } |
| |
| static int vfio_load_setup(QEMUFile *f, void *opaque) |
| { |
| VFIODevice *vbasedev = opaque; |
| |
| return vfio_migration_set_state(vbasedev, VFIO_DEVICE_STATE_RESUMING, |
| vbasedev->migration->device_state); |
| } |
| |
| static int vfio_load_cleanup(void *opaque) |
| { |
| VFIODevice *vbasedev = opaque; |
| |
| vfio_migration_cleanup(vbasedev); |
| trace_vfio_load_cleanup(vbasedev->name); |
| |
| return 0; |
| } |
| |
| static int vfio_load_state(QEMUFile *f, void *opaque, int version_id) |
| { |
| VFIODevice *vbasedev = opaque; |
| int ret = 0; |
| uint64_t data; |
| |
| data = qemu_get_be64(f); |
| while (data != VFIO_MIG_FLAG_END_OF_STATE) { |
| |
| trace_vfio_load_state(vbasedev->name, data); |
| |
| switch (data) { |
| case VFIO_MIG_FLAG_DEV_CONFIG_STATE: |
| { |
| return vfio_load_device_config_state(f, opaque); |
| } |
| case VFIO_MIG_FLAG_DEV_SETUP_STATE: |
| { |
| data = qemu_get_be64(f); |
| if (data == VFIO_MIG_FLAG_END_OF_STATE) { |
| return ret; |
| } else { |
| error_report("%s: SETUP STATE: EOS not found 0x%"PRIx64, |
| vbasedev->name, data); |
| return -EINVAL; |
| } |
| break; |
| } |
| case VFIO_MIG_FLAG_DEV_DATA_STATE: |
| { |
| uint64_t data_size = qemu_get_be64(f); |
| |
| if (data_size) { |
| ret = vfio_load_buffer(f, vbasedev, data_size); |
| if (ret < 0) { |
| return ret; |
| } |
| } |
| break; |
| } |
| case VFIO_MIG_FLAG_DEV_INIT_DATA_SENT: |
| { |
| if (!vfio_precopy_supported(vbasedev) || |
| !migrate_switchover_ack()) { |
| error_report("%s: Received INIT_DATA_SENT but switchover ack " |
| "is not used", vbasedev->name); |
| return -EINVAL; |
| } |
| |
| ret = qemu_loadvm_approve_switchover(); |
| if (ret) { |
| error_report( |
| "%s: qemu_loadvm_approve_switchover failed, err=%d (%s)", |
| vbasedev->name, ret, strerror(-ret)); |
| } |
| |
| return ret; |
| } |
| default: |
| error_report("%s: Unknown tag 0x%"PRIx64, vbasedev->name, data); |
| return -EINVAL; |
| } |
| |
| data = qemu_get_be64(f); |
| ret = qemu_file_get_error(f); |
| if (ret) { |
| return ret; |
| } |
| } |
| return ret; |
| } |
| |
| static bool vfio_switchover_ack_needed(void *opaque) |
| { |
| VFIODevice *vbasedev = opaque; |
| |
| return vfio_precopy_supported(vbasedev); |
| } |
| |
| static const SaveVMHandlers savevm_vfio_handlers = { |
| .save_prepare = vfio_save_prepare, |
| .save_setup = vfio_save_setup, |
| .save_cleanup = vfio_save_cleanup, |
| .state_pending_estimate = vfio_state_pending_estimate, |
| .state_pending_exact = vfio_state_pending_exact, |
| .is_active_iterate = vfio_is_active_iterate, |
| .save_live_iterate = vfio_save_iterate, |
| .save_live_complete_precopy = vfio_save_complete_precopy, |
| .save_state = vfio_save_state, |
| .load_setup = vfio_load_setup, |
| .load_cleanup = vfio_load_cleanup, |
| .load_state = vfio_load_state, |
| .switchover_ack_needed = vfio_switchover_ack_needed, |
| }; |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static void vfio_vmstate_change_prepare(void *opaque, bool running, |
| RunState state) |
| { |
| VFIODevice *vbasedev = opaque; |
| VFIOMigration *migration = vbasedev->migration; |
| enum vfio_device_mig_state new_state; |
| int ret; |
| |
| new_state = migration->device_state == VFIO_DEVICE_STATE_PRE_COPY ? |
| VFIO_DEVICE_STATE_PRE_COPY_P2P : |
| VFIO_DEVICE_STATE_RUNNING_P2P; |
| |
| ret = vfio_migration_set_state_or_reset(vbasedev, new_state); |
| if (ret) { |
| /* |
| * Migration should be aborted in this case, but vm_state_notify() |
| * currently does not support reporting failures. |
| */ |
| if (migrate_get_current()->to_dst_file) { |
| qemu_file_set_error(migrate_get_current()->to_dst_file, ret); |
| } |
| } |
| |
| trace_vfio_vmstate_change_prepare(vbasedev->name, running, |
| RunState_str(state), |
| mig_state_to_str(new_state)); |
| } |
| |
| static void vfio_vmstate_change(void *opaque, bool running, RunState state) |
| { |
| VFIODevice *vbasedev = opaque; |
| enum vfio_device_mig_state new_state; |
| int ret; |
| |
| if (running) { |
| new_state = VFIO_DEVICE_STATE_RUNNING; |
| } else { |
| new_state = |
| (vfio_device_state_is_precopy(vbasedev) && |
| (state == RUN_STATE_FINISH_MIGRATE || state == RUN_STATE_PAUSED)) ? |
| VFIO_DEVICE_STATE_STOP_COPY : |
| VFIO_DEVICE_STATE_STOP; |
| } |
| |
| ret = vfio_migration_set_state_or_reset(vbasedev, new_state); |
| if (ret) { |
| /* |
| * Migration should be aborted in this case, but vm_state_notify() |
| * currently does not support reporting failures. |
| */ |
| if (migrate_get_current()->to_dst_file) { |
| qemu_file_set_error(migrate_get_current()->to_dst_file, ret); |
| } |
| } |
| |
| trace_vfio_vmstate_change(vbasedev->name, running, RunState_str(state), |
| mig_state_to_str(new_state)); |
| } |
| |
| static int vfio_migration_state_notifier(NotifierWithReturn *notifier, |
| MigrationEvent *e, Error **errp) |
| { |
| VFIOMigration *migration = container_of(notifier, VFIOMigration, |
| migration_state); |
| VFIODevice *vbasedev = migration->vbasedev; |
| |
| trace_vfio_migration_state_notifier(vbasedev->name, e->type); |
| |
| if (e->type == MIG_EVENT_PRECOPY_FAILED) { |
| vfio_migration_set_state_or_reset(vbasedev, VFIO_DEVICE_STATE_RUNNING); |
| } |
| return 0; |
| } |
| |
| static void vfio_migration_free(VFIODevice *vbasedev) |
| { |
| g_free(vbasedev->migration); |
| vbasedev->migration = NULL; |
| } |
| |
| static int vfio_migration_query_flags(VFIODevice *vbasedev, uint64_t *mig_flags) |
| { |
| uint64_t buf[DIV_ROUND_UP(sizeof(struct vfio_device_feature) + |
| sizeof(struct vfio_device_feature_migration), |
| sizeof(uint64_t))] = {}; |
| struct vfio_device_feature *feature = (struct vfio_device_feature *)buf; |
| struct vfio_device_feature_migration *mig = |
| (struct vfio_device_feature_migration *)feature->data; |
| |
| feature->argsz = sizeof(buf); |
| feature->flags = VFIO_DEVICE_FEATURE_GET | VFIO_DEVICE_FEATURE_MIGRATION; |
| if (ioctl(vbasedev->fd, VFIO_DEVICE_FEATURE, feature)) { |
| return -errno; |
| } |
| |
| *mig_flags = mig->flags; |
| |
| return 0; |
| } |
| |
| static bool vfio_dma_logging_supported(VFIODevice *vbasedev) |
| { |
| uint64_t buf[DIV_ROUND_UP(sizeof(struct vfio_device_feature), |
| sizeof(uint64_t))] = {}; |
| struct vfio_device_feature *feature = (struct vfio_device_feature *)buf; |
| |
| feature->argsz = sizeof(buf); |
| feature->flags = VFIO_DEVICE_FEATURE_PROBE | |
| VFIO_DEVICE_FEATURE_DMA_LOGGING_START; |
| |
| return !ioctl(vbasedev->fd, VFIO_DEVICE_FEATURE, feature); |
| } |
| |
| static int vfio_migration_init(VFIODevice *vbasedev) |
| { |
| int ret; |
| Object *obj; |
| VFIOMigration *migration; |
| char id[256] = ""; |
| g_autofree char *path = NULL, *oid = NULL; |
| uint64_t mig_flags = 0; |
| VMChangeStateHandler *prepare_cb; |
| |
| if (!vbasedev->ops->vfio_get_object) { |
| return -EINVAL; |
| } |
| |
| obj = vbasedev->ops->vfio_get_object(vbasedev); |
| if (!obj) { |
| return -EINVAL; |
| } |
| |
| ret = vfio_migration_query_flags(vbasedev, &mig_flags); |
| if (ret) { |
| return ret; |
| } |
| |
| /* Basic migration functionality must be supported */ |
| if (!(mig_flags & VFIO_MIGRATION_STOP_COPY)) { |
| return -EOPNOTSUPP; |
| } |
| |
| vbasedev->migration = g_new0(VFIOMigration, 1); |
| migration = vbasedev->migration; |
| migration->vbasedev = vbasedev; |
| migration->device_state = VFIO_DEVICE_STATE_RUNNING; |
| migration->data_fd = -1; |
| migration->mig_flags = mig_flags; |
| |
| vbasedev->dirty_pages_supported = vfio_dma_logging_supported(vbasedev); |
| |
| oid = vmstate_if_get_id(VMSTATE_IF(DEVICE(obj))); |
| if (oid) { |
| path = g_strdup_printf("%s/vfio", oid); |
| } else { |
| path = g_strdup("vfio"); |
| } |
| strpadcpy(id, sizeof(id), path, '\0'); |
| |
| register_savevm_live(id, VMSTATE_INSTANCE_ID_ANY, 1, &savevm_vfio_handlers, |
| vbasedev); |
| |
| prepare_cb = migration->mig_flags & VFIO_MIGRATION_P2P ? |
| vfio_vmstate_change_prepare : |
| NULL; |
| migration->vm_state = qdev_add_vm_change_state_handler_full( |
| vbasedev->dev, vfio_vmstate_change, prepare_cb, vbasedev); |
| migration_add_notifier(&migration->migration_state, |
| vfio_migration_state_notifier); |
| |
| return 0; |
| } |
| |
| static void vfio_migration_deinit(VFIODevice *vbasedev) |
| { |
| VFIOMigration *migration = vbasedev->migration; |
| |
| migration_remove_notifier(&migration->migration_state); |
| qemu_del_vm_change_state_handler(migration->vm_state); |
| unregister_savevm(VMSTATE_IF(vbasedev->dev), "vfio", vbasedev); |
| vfio_migration_free(vbasedev); |
| vfio_unblock_multiple_devices_migration(); |
| } |
| |
| static int vfio_block_migration(VFIODevice *vbasedev, Error *err, Error **errp) |
| { |
| if (vbasedev->enable_migration == ON_OFF_AUTO_ON) { |
| error_propagate(errp, err); |
| return -EINVAL; |
| } |
| |
| vbasedev->migration_blocker = error_copy(err); |
| error_free(err); |
| |
| return migrate_add_blocker(&vbasedev->migration_blocker, errp); |
| } |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| int64_t vfio_mig_bytes_transferred(void) |
| { |
| return bytes_transferred; |
| } |
| |
| void vfio_reset_bytes_transferred(void) |
| { |
| bytes_transferred = 0; |
| } |
| |
| /* |
| * Return true when either migration initialized or blocker registered. |
| * Currently only return false when adding blocker fails which will |
| * de-register vfio device. |
| */ |
| bool vfio_migration_realize(VFIODevice *vbasedev, Error **errp) |
| { |
| Error *err = NULL; |
| int ret; |
| |
| if (vbasedev->enable_migration == ON_OFF_AUTO_OFF) { |
| error_setg(&err, "%s: Migration is disabled for VFIO device", |
| vbasedev->name); |
| return !vfio_block_migration(vbasedev, err, errp); |
| } |
| |
| ret = vfio_migration_init(vbasedev); |
| if (ret) { |
| if (ret == -ENOTTY) { |
| error_setg(&err, "%s: VFIO migration is not supported in kernel", |
| vbasedev->name); |
| } else { |
| error_setg(&err, |
| "%s: Migration couldn't be initialized for VFIO device, " |
| "err: %d (%s)", |
| vbasedev->name, ret, strerror(-ret)); |
| } |
| |
| return !vfio_block_migration(vbasedev, err, errp); |
| } |
| |
| if (!vbasedev->dirty_pages_supported) { |
| if (vbasedev->enable_migration == ON_OFF_AUTO_AUTO) { |
| error_setg(&err, |
| "%s: VFIO device doesn't support device dirty tracking", |
| vbasedev->name); |
| goto add_blocker; |
| } |
| |
| warn_report("%s: VFIO device doesn't support device dirty tracking", |
| vbasedev->name); |
| } |
| |
| ret = vfio_block_multiple_devices_migration(vbasedev, errp); |
| if (ret) { |
| goto out_deinit; |
| } |
| |
| if (vfio_viommu_preset(vbasedev)) { |
| error_setg(&err, "%s: Migration is currently not supported " |
| "with vIOMMU enabled", vbasedev->name); |
| goto add_blocker; |
| } |
| |
| trace_vfio_migration_realize(vbasedev->name); |
| return true; |
| |
| add_blocker: |
| ret = vfio_block_migration(vbasedev, err, errp); |
| out_deinit: |
| if (ret) { |
| vfio_migration_deinit(vbasedev); |
| } |
| return !ret; |
| } |
| |
| void vfio_migration_exit(VFIODevice *vbasedev) |
| { |
| if (vbasedev->migration) { |
| vfio_migration_deinit(vbasedev); |
| } |
| |
| migrate_del_blocker(&vbasedev->migration_blocker); |
| } |
