| #include "hw.h" |
| #include "net.h" |
| #include "trace.h" |
| #include "sysbus.h" |
| |
| /* MIPSnet register offsets */ |
| |
| #define MIPSNET_DEV_ID 0x00 |
| #define MIPSNET_BUSY 0x08 |
| #define MIPSNET_RX_DATA_COUNT 0x0c |
| #define MIPSNET_TX_DATA_COUNT 0x10 |
| #define MIPSNET_INT_CTL 0x14 |
| # define MIPSNET_INTCTL_TXDONE 0x00000001 |
| # define MIPSNET_INTCTL_RXDONE 0x00000002 |
| # define MIPSNET_INTCTL_TESTBIT 0x80000000 |
| #define MIPSNET_INTERRUPT_INFO 0x18 |
| #define MIPSNET_RX_DATA_BUFFER 0x1c |
| #define MIPSNET_TX_DATA_BUFFER 0x20 |
| |
| #define MAX_ETH_FRAME_SIZE 1514 |
| |
| typedef struct MIPSnetState { |
| SysBusDevice busdev; |
| |
| uint32_t busy; |
| uint32_t rx_count; |
| uint32_t rx_read; |
| uint32_t tx_count; |
| uint32_t tx_written; |
| uint32_t intctl; |
| uint8_t rx_buffer[MAX_ETH_FRAME_SIZE]; |
| uint8_t tx_buffer[MAX_ETH_FRAME_SIZE]; |
| MemoryRegion io; |
| qemu_irq irq; |
| NICState *nic; |
| NICConf conf; |
| } MIPSnetState; |
| |
| static void mipsnet_reset(MIPSnetState *s) |
| { |
| s->busy = 1; |
| s->rx_count = 0; |
| s->rx_read = 0; |
| s->tx_count = 0; |
| s->tx_written = 0; |
| s->intctl = 0; |
| memset(s->rx_buffer, 0, MAX_ETH_FRAME_SIZE); |
| memset(s->tx_buffer, 0, MAX_ETH_FRAME_SIZE); |
| } |
| |
| static void mipsnet_update_irq(MIPSnetState *s) |
| { |
| int isr = !!s->intctl; |
| trace_mipsnet_irq(isr, s->intctl); |
| qemu_set_irq(s->irq, isr); |
| } |
| |
| static int mipsnet_buffer_full(MIPSnetState *s) |
| { |
| if (s->rx_count >= MAX_ETH_FRAME_SIZE) |
| return 1; |
| return 0; |
| } |
| |
| static int mipsnet_can_receive(VLANClientState *nc) |
| { |
| MIPSnetState *s = DO_UPCAST(NICState, nc, nc)->opaque; |
| |
| if (s->busy) |
| return 0; |
| return !mipsnet_buffer_full(s); |
| } |
| |
| static ssize_t mipsnet_receive(VLANClientState *nc, const uint8_t *buf, size_t size) |
| { |
| MIPSnetState *s = DO_UPCAST(NICState, nc, nc)->opaque; |
| |
| trace_mipsnet_receive(size); |
| if (!mipsnet_can_receive(nc)) |
| return -1; |
| |
| s->busy = 1; |
| |
| /* Just accept everything. */ |
| |
| /* Write packet data. */ |
| memcpy(s->rx_buffer, buf, size); |
| |
| s->rx_count = size; |
| s->rx_read = 0; |
| |
| /* Now we can signal we have received something. */ |
| s->intctl |= MIPSNET_INTCTL_RXDONE; |
| mipsnet_update_irq(s); |
| |
| return size; |
| } |
| |
| static uint64_t mipsnet_ioport_read(void *opaque, target_phys_addr_t addr, |
| unsigned int size) |
| { |
| MIPSnetState *s = opaque; |
| int ret = 0; |
| |
| addr &= 0x3f; |
| switch (addr) { |
| case MIPSNET_DEV_ID: |
| ret = be32_to_cpu(0x4d495053); /* MIPS */ |
| break; |
| case MIPSNET_DEV_ID + 4: |
| ret = be32_to_cpu(0x4e455430); /* NET0 */ |
| break; |
| case MIPSNET_BUSY: |
| ret = s->busy; |
| break; |
| case MIPSNET_RX_DATA_COUNT: |
| ret = s->rx_count; |
| break; |
| case MIPSNET_TX_DATA_COUNT: |
| ret = s->tx_count; |
| break; |
| case MIPSNET_INT_CTL: |
| ret = s->intctl; |
| s->intctl &= ~MIPSNET_INTCTL_TESTBIT; |
| break; |
| case MIPSNET_INTERRUPT_INFO: |
| /* XXX: This seems to be a per-VPE interrupt number. */ |
| ret = 0; |
| break; |
| case MIPSNET_RX_DATA_BUFFER: |
| if (s->rx_count) { |
| s->rx_count--; |
| ret = s->rx_buffer[s->rx_read++]; |
| } |
| break; |
| /* Reads as zero. */ |
| case MIPSNET_TX_DATA_BUFFER: |
| default: |
| break; |
| } |
| trace_mipsnet_read(addr, ret); |
| return ret; |
| } |
| |
| static void mipsnet_ioport_write(void *opaque, target_phys_addr_t addr, |
| uint64_t val, unsigned int size) |
| { |
| MIPSnetState *s = opaque; |
| |
| addr &= 0x3f; |
| trace_mipsnet_write(addr, val); |
| switch (addr) { |
| case MIPSNET_TX_DATA_COUNT: |
| s->tx_count = (val <= MAX_ETH_FRAME_SIZE) ? val : 0; |
| s->tx_written = 0; |
| break; |
| case MIPSNET_INT_CTL: |
| if (val & MIPSNET_INTCTL_TXDONE) { |
| s->intctl &= ~MIPSNET_INTCTL_TXDONE; |
| } else if (val & MIPSNET_INTCTL_RXDONE) { |
| s->intctl &= ~MIPSNET_INTCTL_RXDONE; |
| } else if (val & MIPSNET_INTCTL_TESTBIT) { |
| mipsnet_reset(s); |
| s->intctl |= MIPSNET_INTCTL_TESTBIT; |
| } else if (!val) { |
| /* ACK testbit interrupt, flag was cleared on read. */ |
| } |
| s->busy = !!s->intctl; |
| mipsnet_update_irq(s); |
| break; |
| case MIPSNET_TX_DATA_BUFFER: |
| s->tx_buffer[s->tx_written++] = val; |
| if (s->tx_written == s->tx_count) { |
| /* Send buffer. */ |
| trace_mipsnet_send(s->tx_count); |
| qemu_send_packet(&s->nic->nc, s->tx_buffer, s->tx_count); |
| s->tx_count = s->tx_written = 0; |
| s->intctl |= MIPSNET_INTCTL_TXDONE; |
| s->busy = 1; |
| mipsnet_update_irq(s); |
| } |
| break; |
| /* Read-only registers */ |
| case MIPSNET_DEV_ID: |
| case MIPSNET_BUSY: |
| case MIPSNET_RX_DATA_COUNT: |
| case MIPSNET_INTERRUPT_INFO: |
| case MIPSNET_RX_DATA_BUFFER: |
| default: |
| break; |
| } |
| } |
| |
| static const VMStateDescription vmstate_mipsnet = { |
| .name = "mipsnet", |
| .version_id = 0, |
| .minimum_version_id = 0, |
| .minimum_version_id_old = 0, |
| .fields = (VMStateField[]) { |
| VMSTATE_UINT32(busy, MIPSnetState), |
| VMSTATE_UINT32(rx_count, MIPSnetState), |
| VMSTATE_UINT32(rx_read, MIPSnetState), |
| VMSTATE_UINT32(tx_count, MIPSnetState), |
| VMSTATE_UINT32(tx_written, MIPSnetState), |
| VMSTATE_UINT32(intctl, MIPSnetState), |
| VMSTATE_BUFFER(rx_buffer, MIPSnetState), |
| VMSTATE_BUFFER(tx_buffer, MIPSnetState), |
| VMSTATE_END_OF_LIST() |
| } |
| }; |
| |
| static void mipsnet_cleanup(VLANClientState *nc) |
| { |
| MIPSnetState *s = DO_UPCAST(NICState, nc, nc)->opaque; |
| |
| s->nic = NULL; |
| } |
| |
| static NetClientInfo net_mipsnet_info = { |
| .type = NET_CLIENT_TYPE_NIC, |
| .size = sizeof(NICState), |
| .can_receive = mipsnet_can_receive, |
| .receive = mipsnet_receive, |
| .cleanup = mipsnet_cleanup, |
| }; |
| |
| static MemoryRegionOps mipsnet_ioport_ops = { |
| .read = mipsnet_ioport_read, |
| .write = mipsnet_ioport_write, |
| .impl.min_access_size = 1, |
| .impl.max_access_size = 4, |
| }; |
| |
| static int mipsnet_sysbus_init(SysBusDevice *dev) |
| { |
| MIPSnetState *s = DO_UPCAST(MIPSnetState, busdev, dev); |
| |
| memory_region_init_io(&s->io, &mipsnet_ioport_ops, s, "mipsnet-io", 36); |
| sysbus_init_mmio(dev, &s->io); |
| sysbus_init_irq(dev, &s->irq); |
| |
| s->nic = qemu_new_nic(&net_mipsnet_info, &s->conf, |
| qdev_get_info(&dev->qdev)->name, dev->qdev.id, s); |
| qemu_format_nic_info_str(&s->nic->nc, s->conf.macaddr.a); |
| |
| return 0; |
| } |
| |
| static void mipsnet_sysbus_reset(DeviceState *dev) |
| { |
| MIPSnetState *s = DO_UPCAST(MIPSnetState, busdev.qdev, dev); |
| mipsnet_reset(s); |
| } |
| |
| static SysBusDeviceInfo mipsnet_info = { |
| .init = mipsnet_sysbus_init, |
| .qdev.name = "mipsnet", |
| .qdev.desc = "MIPS Simulator network device", |
| .qdev.size = sizeof(MIPSnetState), |
| .qdev.vmsd = &vmstate_mipsnet, |
| .qdev.reset = mipsnet_sysbus_reset, |
| .qdev.props = (Property[]) { |
| DEFINE_NIC_PROPERTIES(MIPSnetState, conf), |
| DEFINE_PROP_END_OF_LIST(), |
| } |
| }; |
| |
| static void mipsnet_register_devices(void) |
| { |
| sysbus_register_withprop(&mipsnet_info); |
| } |
| |
| device_init(mipsnet_register_devices) |