| /* |
| * ARM generic helpers. |
| * |
| * This code is licensed under the GNU GPL v2 or later. |
| * |
| * SPDX-License-Identifier: GPL-2.0-or-later |
| */ |
| |
| #include "qemu/osdep.h" |
| #include "qemu/units.h" |
| #include "qemu/log.h" |
| #include "target/arm/idau.h" |
| #include "trace.h" |
| #include "cpu.h" |
| #include "internals.h" |
| #include "exec/helper-proto.h" |
| #include "qemu/host-utils.h" |
| #include "qemu/main-loop.h" |
| #include "qemu/timer.h" |
| #include "qemu/bitops.h" |
| #include "qemu/crc32c.h" |
| #include "qemu/qemu-print.h" |
| #include "exec/exec-all.h" |
| #include <zlib.h> /* For crc32 */ |
| #include "hw/irq.h" |
| #include "semihosting/semihost.h" |
| #include "sysemu/cpus.h" |
| #include "sysemu/cpu-timers.h" |
| #include "sysemu/kvm.h" |
| #include "sysemu/tcg.h" |
| #include "qemu/range.h" |
| #include "qapi/qapi-commands-machine-target.h" |
| #include "qapi/error.h" |
| #include "qemu/guest-random.h" |
| #ifdef CONFIG_TCG |
| #include "arm_ldst.h" |
| #include "exec/cpu_ldst.h" |
| #include "semihosting/common-semi.h" |
| #endif |
| |
| #define ARM_CPU_FREQ 1000000000 /* FIXME: 1 GHz, should be configurable */ |
| #define PMCR_NUM_COUNTERS 4 /* QEMU IMPDEF choice */ |
| |
| #ifndef CONFIG_USER_ONLY |
| |
| static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address, |
| MMUAccessType access_type, ARMMMUIdx mmu_idx, |
| bool s1_is_el0, |
| hwaddr *phys_ptr, MemTxAttrs *txattrs, int *prot, |
| target_ulong *page_size_ptr, |
| ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs) |
| __attribute__((nonnull)); |
| #endif |
| |
| static void switch_mode(CPUARMState *env, int mode); |
| static int aa64_va_parameter_tbi(uint64_t tcr, ARMMMUIdx mmu_idx); |
| |
| static uint64_t raw_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| assert(ri->fieldoffset); |
| if (cpreg_field_is_64bit(ri)) { |
| return CPREG_FIELD64(env, ri); |
| } else { |
| return CPREG_FIELD32(env, ri); |
| } |
| } |
| |
| static void raw_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| assert(ri->fieldoffset); |
| if (cpreg_field_is_64bit(ri)) { |
| CPREG_FIELD64(env, ri) = value; |
| } else { |
| CPREG_FIELD32(env, ri) = value; |
| } |
| } |
| |
| static void *raw_ptr(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return (char *)env + ri->fieldoffset; |
| } |
| |
| uint64_t read_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| /* Raw read of a coprocessor register (as needed for migration, etc). */ |
| if (ri->type & ARM_CP_CONST) { |
| return ri->resetvalue; |
| } else if (ri->raw_readfn) { |
| return ri->raw_readfn(env, ri); |
| } else if (ri->readfn) { |
| return ri->readfn(env, ri); |
| } else { |
| return raw_read(env, ri); |
| } |
| } |
| |
| static void write_raw_cp_reg(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t v) |
| { |
| /* Raw write of a coprocessor register (as needed for migration, etc). |
| * Note that constant registers are treated as write-ignored; the |
| * caller should check for success by whether a readback gives the |
| * value written. |
| */ |
| if (ri->type & ARM_CP_CONST) { |
| return; |
| } else if (ri->raw_writefn) { |
| ri->raw_writefn(env, ri, v); |
| } else if (ri->writefn) { |
| ri->writefn(env, ri, v); |
| } else { |
| raw_write(env, ri, v); |
| } |
| } |
| |
| static bool raw_accessors_invalid(const ARMCPRegInfo *ri) |
| { |
| /* Return true if the regdef would cause an assertion if you called |
| * read_raw_cp_reg() or write_raw_cp_reg() on it (ie if it is a |
| * program bug for it not to have the NO_RAW flag). |
| * NB that returning false here doesn't necessarily mean that calling |
| * read/write_raw_cp_reg() is safe, because we can't distinguish "has |
| * read/write access functions which are safe for raw use" from "has |
| * read/write access functions which have side effects but has forgotten |
| * to provide raw access functions". |
| * The tests here line up with the conditions in read/write_raw_cp_reg() |
| * and assertions in raw_read()/raw_write(). |
| */ |
| if ((ri->type & ARM_CP_CONST) || |
| ri->fieldoffset || |
| ((ri->raw_writefn || ri->writefn) && (ri->raw_readfn || ri->readfn))) { |
| return false; |
| } |
| return true; |
| } |
| |
| bool write_cpustate_to_list(ARMCPU *cpu, bool kvm_sync) |
| { |
| /* Write the coprocessor state from cpu->env to the (index,value) list. */ |
| int i; |
| bool ok = true; |
| |
| for (i = 0; i < cpu->cpreg_array_len; i++) { |
| uint32_t regidx = kvm_to_cpreg_id(cpu->cpreg_indexes[i]); |
| const ARMCPRegInfo *ri; |
| uint64_t newval; |
| |
| ri = get_arm_cp_reginfo(cpu->cp_regs, regidx); |
| if (!ri) { |
| ok = false; |
| continue; |
| } |
| if (ri->type & ARM_CP_NO_RAW) { |
| continue; |
| } |
| |
| newval = read_raw_cp_reg(&cpu->env, ri); |
| if (kvm_sync) { |
| /* |
| * Only sync if the previous list->cpustate sync succeeded. |
| * Rather than tracking the success/failure state for every |
| * item in the list, we just recheck "does the raw write we must |
| * have made in write_list_to_cpustate() read back OK" here. |
| */ |
| uint64_t oldval = cpu->cpreg_values[i]; |
| |
| if (oldval == newval) { |
| continue; |
| } |
| |
| write_raw_cp_reg(&cpu->env, ri, oldval); |
| if (read_raw_cp_reg(&cpu->env, ri) != oldval) { |
| continue; |
| } |
| |
| write_raw_cp_reg(&cpu->env, ri, newval); |
| } |
| cpu->cpreg_values[i] = newval; |
| } |
| return ok; |
| } |
| |
| bool write_list_to_cpustate(ARMCPU *cpu) |
| { |
| int i; |
| bool ok = true; |
| |
| for (i = 0; i < cpu->cpreg_array_len; i++) { |
| uint32_t regidx = kvm_to_cpreg_id(cpu->cpreg_indexes[i]); |
| uint64_t v = cpu->cpreg_values[i]; |
| const ARMCPRegInfo *ri; |
| |
| ri = get_arm_cp_reginfo(cpu->cp_regs, regidx); |
| if (!ri) { |
| ok = false; |
| continue; |
| } |
| if (ri->type & ARM_CP_NO_RAW) { |
| continue; |
| } |
| /* Write value and confirm it reads back as written |
| * (to catch read-only registers and partially read-only |
| * registers where the incoming migration value doesn't match) |
| */ |
| write_raw_cp_reg(&cpu->env, ri, v); |
| if (read_raw_cp_reg(&cpu->env, ri) != v) { |
| ok = false; |
| } |
| } |
| return ok; |
| } |
| |
| static void add_cpreg_to_list(gpointer key, gpointer opaque) |
| { |
| ARMCPU *cpu = opaque; |
| uint64_t regidx; |
| const ARMCPRegInfo *ri; |
| |
| regidx = *(uint32_t *)key; |
| ri = get_arm_cp_reginfo(cpu->cp_regs, regidx); |
| |
| if (!(ri->type & (ARM_CP_NO_RAW|ARM_CP_ALIAS))) { |
| cpu->cpreg_indexes[cpu->cpreg_array_len] = cpreg_to_kvm_id(regidx); |
| /* The value array need not be initialized at this point */ |
| cpu->cpreg_array_len++; |
| } |
| } |
| |
| static void count_cpreg(gpointer key, gpointer opaque) |
| { |
| ARMCPU *cpu = opaque; |
| uint64_t regidx; |
| const ARMCPRegInfo *ri; |
| |
| regidx = *(uint32_t *)key; |
| ri = get_arm_cp_reginfo(cpu->cp_regs, regidx); |
| |
| if (!(ri->type & (ARM_CP_NO_RAW|ARM_CP_ALIAS))) { |
| cpu->cpreg_array_len++; |
| } |
| } |
| |
| static gint cpreg_key_compare(gconstpointer a, gconstpointer b) |
| { |
| uint64_t aidx = cpreg_to_kvm_id(*(uint32_t *)a); |
| uint64_t bidx = cpreg_to_kvm_id(*(uint32_t *)b); |
| |
| if (aidx > bidx) { |
| return 1; |
| } |
| if (aidx < bidx) { |
| return -1; |
| } |
| return 0; |
| } |
| |
| void init_cpreg_list(ARMCPU *cpu) |
| { |
| /* Initialise the cpreg_tuples[] array based on the cp_regs hash. |
| * Note that we require cpreg_tuples[] to be sorted by key ID. |
| */ |
| GList *keys; |
| int arraylen; |
| |
| keys = g_hash_table_get_keys(cpu->cp_regs); |
| keys = g_list_sort(keys, cpreg_key_compare); |
| |
| cpu->cpreg_array_len = 0; |
| |
| g_list_foreach(keys, count_cpreg, cpu); |
| |
| arraylen = cpu->cpreg_array_len; |
| cpu->cpreg_indexes = g_new(uint64_t, arraylen); |
| cpu->cpreg_values = g_new(uint64_t, arraylen); |
| cpu->cpreg_vmstate_indexes = g_new(uint64_t, arraylen); |
| cpu->cpreg_vmstate_values = g_new(uint64_t, arraylen); |
| cpu->cpreg_vmstate_array_len = cpu->cpreg_array_len; |
| cpu->cpreg_array_len = 0; |
| |
| g_list_foreach(keys, add_cpreg_to_list, cpu); |
| |
| assert(cpu->cpreg_array_len == arraylen); |
| |
| g_list_free(keys); |
| } |
| |
| /* |
| * Some registers are not accessible from AArch32 EL3 if SCR.NS == 0. |
| */ |
| static CPAccessResult access_el3_aa32ns(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (!is_a64(env) && arm_current_el(env) == 3 && |
| arm_is_secure_below_el3(env)) { |
| return CP_ACCESS_TRAP_UNCATEGORIZED; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| /* Some secure-only AArch32 registers trap to EL3 if used from |
| * Secure EL1 (but are just ordinary UNDEF in other non-EL3 contexts). |
| * Note that an access from Secure EL1 can only happen if EL3 is AArch64. |
| * We assume that the .access field is set to PL1_RW. |
| */ |
| static CPAccessResult access_trap_aa32s_el1(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 3) { |
| return CP_ACCESS_OK; |
| } |
| if (arm_is_secure_below_el3(env)) { |
| if (env->cp15.scr_el3 & SCR_EEL2) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| return CP_ACCESS_TRAP_EL3; |
| } |
| /* This will be EL1 NS and EL2 NS, which just UNDEF */ |
| return CP_ACCESS_TRAP_UNCATEGORIZED; |
| } |
| |
| static uint64_t arm_mdcr_el2_eff(CPUARMState *env) |
| { |
| return arm_is_el2_enabled(env) ? env->cp15.mdcr_el2 : 0; |
| } |
| |
| /* Check for traps to "powerdown debug" registers, which are controlled |
| * by MDCR.TDOSA |
| */ |
| static CPAccessResult access_tdosa(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| int el = arm_current_el(env); |
| uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); |
| bool mdcr_el2_tdosa = (mdcr_el2 & MDCR_TDOSA) || (mdcr_el2 & MDCR_TDE) || |
| (arm_hcr_el2_eff(env) & HCR_TGE); |
| |
| if (el < 2 && mdcr_el2_tdosa) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TDOSA)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| /* Check for traps to "debug ROM" registers, which are controlled |
| * by MDCR_EL2.TDRA for EL2 but by the more general MDCR_EL3.TDA for EL3. |
| */ |
| static CPAccessResult access_tdra(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| int el = arm_current_el(env); |
| uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); |
| bool mdcr_el2_tdra = (mdcr_el2 & MDCR_TDRA) || (mdcr_el2 & MDCR_TDE) || |
| (arm_hcr_el2_eff(env) & HCR_TGE); |
| |
| if (el < 2 && mdcr_el2_tdra) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TDA)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| /* Check for traps to general debug registers, which are controlled |
| * by MDCR_EL2.TDA for EL2 and MDCR_EL3.TDA for EL3. |
| */ |
| static CPAccessResult access_tda(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| int el = arm_current_el(env); |
| uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); |
| bool mdcr_el2_tda = (mdcr_el2 & MDCR_TDA) || (mdcr_el2 & MDCR_TDE) || |
| (arm_hcr_el2_eff(env) & HCR_TGE); |
| |
| if (el < 2 && mdcr_el2_tda) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TDA)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| /* Check for traps to performance monitor registers, which are controlled |
| * by MDCR_EL2.TPM for EL2 and MDCR_EL3.TPM for EL3. |
| */ |
| static CPAccessResult access_tpm(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| int el = arm_current_el(env); |
| uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); |
| |
| if (el < 2 && (mdcr_el2 & MDCR_TPM)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TPM)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| /* Check for traps from EL1 due to HCR_EL2.TVM and HCR_EL2.TRVM. */ |
| static CPAccessResult access_tvm_trvm(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 1) { |
| uint64_t trap = isread ? HCR_TRVM : HCR_TVM; |
| if (arm_hcr_el2_eff(env) & trap) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| /* Check for traps from EL1 due to HCR_EL2.TSW. */ |
| static CPAccessResult access_tsw(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TSW)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| /* Check for traps from EL1 due to HCR_EL2.TACR. */ |
| static CPAccessResult access_tacr(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TACR)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| /* Check for traps from EL1 due to HCR_EL2.TTLB. */ |
| static CPAccessResult access_ttlb(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TTLB)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static void dacr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| raw_write(env, ri, value); |
| tlb_flush(CPU(cpu)); /* Flush TLB as domain not tracked in TLB */ |
| } |
| |
| static void fcse_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| if (raw_read(env, ri) != value) { |
| /* Unlike real hardware the qemu TLB uses virtual addresses, |
| * not modified virtual addresses, so this causes a TLB flush. |
| */ |
| tlb_flush(CPU(cpu)); |
| raw_write(env, ri, value); |
| } |
| } |
| |
| static void contextidr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| if (raw_read(env, ri) != value && !arm_feature(env, ARM_FEATURE_PMSA) |
| && !extended_addresses_enabled(env)) { |
| /* For VMSA (when not using the LPAE long descriptor page table |
| * format) this register includes the ASID, so do a TLB flush. |
| * For PMSA it is purely a process ID and no action is needed. |
| */ |
| tlb_flush(CPU(cpu)); |
| } |
| raw_write(env, ri, value); |
| } |
| |
| /* IS variants of TLB operations must affect all cores */ |
| static void tlbiall_is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| |
| tlb_flush_all_cpus_synced(cs); |
| } |
| |
| static void tlbiasid_is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| |
| tlb_flush_all_cpus_synced(cs); |
| } |
| |
| static void tlbimva_is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| |
| tlb_flush_page_all_cpus_synced(cs, value & TARGET_PAGE_MASK); |
| } |
| |
| static void tlbimvaa_is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| |
| tlb_flush_page_all_cpus_synced(cs, value & TARGET_PAGE_MASK); |
| } |
| |
| /* |
| * Non-IS variants of TLB operations are upgraded to |
| * IS versions if we are at EL1 and HCR_EL2.FB is effectively set to |
| * force broadcast of these operations. |
| */ |
| static bool tlb_force_broadcast(CPUARMState *env) |
| { |
| return arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_FB); |
| } |
| |
| static void tlbiall_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Invalidate all (TLBIALL) */ |
| CPUState *cs = env_cpu(env); |
| |
| if (tlb_force_broadcast(env)) { |
| tlb_flush_all_cpus_synced(cs); |
| } else { |
| tlb_flush(cs); |
| } |
| } |
| |
| static void tlbimva_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Invalidate single TLB entry by MVA and ASID (TLBIMVA) */ |
| CPUState *cs = env_cpu(env); |
| |
| value &= TARGET_PAGE_MASK; |
| if (tlb_force_broadcast(env)) { |
| tlb_flush_page_all_cpus_synced(cs, value); |
| } else { |
| tlb_flush_page(cs, value); |
| } |
| } |
| |
| static void tlbiasid_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Invalidate by ASID (TLBIASID) */ |
| CPUState *cs = env_cpu(env); |
| |
| if (tlb_force_broadcast(env)) { |
| tlb_flush_all_cpus_synced(cs); |
| } else { |
| tlb_flush(cs); |
| } |
| } |
| |
| static void tlbimvaa_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Invalidate single entry by MVA, all ASIDs (TLBIMVAA) */ |
| CPUState *cs = env_cpu(env); |
| |
| value &= TARGET_PAGE_MASK; |
| if (tlb_force_broadcast(env)) { |
| tlb_flush_page_all_cpus_synced(cs, value); |
| } else { |
| tlb_flush_page(cs, value); |
| } |
| } |
| |
| static void tlbiall_nsnh_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| |
| tlb_flush_by_mmuidx(cs, |
| ARMMMUIdxBit_E10_1 | |
| ARMMMUIdxBit_E10_1_PAN | |
| ARMMMUIdxBit_E10_0); |
| } |
| |
| static void tlbiall_nsnh_is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| |
| tlb_flush_by_mmuidx_all_cpus_synced(cs, |
| ARMMMUIdxBit_E10_1 | |
| ARMMMUIdxBit_E10_1_PAN | |
| ARMMMUIdxBit_E10_0); |
| } |
| |
| |
| static void tlbiall_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| |
| tlb_flush_by_mmuidx(cs, ARMMMUIdxBit_E2); |
| } |
| |
| static void tlbiall_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| |
| tlb_flush_by_mmuidx_all_cpus_synced(cs, ARMMMUIdxBit_E2); |
| } |
| |
| static void tlbimva_hyp_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| uint64_t pageaddr = value & ~MAKE_64BIT_MASK(0, 12); |
| |
| tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_E2); |
| } |
| |
| static void tlbimva_hyp_is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| uint64_t pageaddr = value & ~MAKE_64BIT_MASK(0, 12); |
| |
| tlb_flush_page_by_mmuidx_all_cpus_synced(cs, pageaddr, |
| ARMMMUIdxBit_E2); |
| } |
| |
| static const ARMCPRegInfo cp_reginfo[] = { |
| /* Define the secure and non-secure FCSE identifier CP registers |
| * separately because there is no secure bank in V8 (no _EL3). This allows |
| * the secure register to be properly reset and migrated. There is also no |
| * v8 EL1 version of the register so the non-secure instance stands alone. |
| */ |
| { .name = "FCSEIDR", |
| .cp = 15, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 0, |
| .access = PL1_RW, .secure = ARM_CP_SECSTATE_NS, |
| .fieldoffset = offsetof(CPUARMState, cp15.fcseidr_ns), |
| .resetvalue = 0, .writefn = fcse_write, .raw_writefn = raw_write, }, |
| { .name = "FCSEIDR_S", |
| .cp = 15, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 0, |
| .access = PL1_RW, .secure = ARM_CP_SECSTATE_S, |
| .fieldoffset = offsetof(CPUARMState, cp15.fcseidr_s), |
| .resetvalue = 0, .writefn = fcse_write, .raw_writefn = raw_write, }, |
| /* Define the secure and non-secure context identifier CP registers |
| * separately because there is no secure bank in V8 (no _EL3). This allows |
| * the secure register to be properly reset and migrated. In the |
| * non-secure case, the 32-bit register will have reset and migration |
| * disabled during registration as it is handled by the 64-bit instance. |
| */ |
| { .name = "CONTEXTIDR_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .secure = ARM_CP_SECSTATE_NS, |
| .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[1]), |
| .resetvalue = 0, .writefn = contextidr_write, .raw_writefn = raw_write, }, |
| { .name = "CONTEXTIDR_S", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 13, .crm = 0, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .secure = ARM_CP_SECSTATE_S, |
| .fieldoffset = offsetof(CPUARMState, cp15.contextidr_s), |
| .resetvalue = 0, .writefn = contextidr_write, .raw_writefn = raw_write, }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo not_v8_cp_reginfo[] = { |
| /* NB: Some of these registers exist in v8 but with more precise |
| * definitions that don't use CP_ANY wildcards (mostly in v8_cp_reginfo[]). |
| */ |
| /* MMU Domain access control / MPU write buffer control */ |
| { .name = "DACR", |
| .cp = 15, .opc1 = CP_ANY, .crn = 3, .crm = CP_ANY, .opc2 = CP_ANY, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, |
| .writefn = dacr_write, .raw_writefn = raw_write, |
| .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s), |
| offsetoflow32(CPUARMState, cp15.dacr_ns) } }, |
| /* ARMv7 allocates a range of implementation defined TLB LOCKDOWN regs. |
| * For v6 and v5, these mappings are overly broad. |
| */ |
| { .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 0, |
| .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_NOP }, |
| { .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 1, |
| .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_NOP }, |
| { .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 4, |
| .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_NOP }, |
| { .name = "TLB_LOCKDOWN", .cp = 15, .crn = 10, .crm = 8, |
| .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_NOP }, |
| /* Cache maintenance ops; some of this space may be overridden later. */ |
| { .name = "CACHEMAINT", .cp = 15, .crn = 7, .crm = CP_ANY, |
| .opc1 = 0, .opc2 = CP_ANY, .access = PL1_W, |
| .type = ARM_CP_NOP | ARM_CP_OVERRIDE }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo not_v6_cp_reginfo[] = { |
| /* Not all pre-v6 cores implemented this WFI, so this is slightly |
| * over-broad. |
| */ |
| { .name = "WFI_v5", .cp = 15, .crn = 7, .crm = 8, .opc1 = 0, .opc2 = 2, |
| .access = PL1_W, .type = ARM_CP_WFI }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo not_v7_cp_reginfo[] = { |
| /* Standard v6 WFI (also used in some pre-v6 cores); not in v7 (which |
| * is UNPREDICTABLE; we choose to NOP as most implementations do). |
| */ |
| { .name = "WFI_v6", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4, |
| .access = PL1_W, .type = ARM_CP_WFI }, |
| /* L1 cache lockdown. Not architectural in v6 and earlier but in practice |
| * implemented in 926, 946, 1026, 1136, 1176 and 11MPCore. StrongARM and |
| * OMAPCP will override this space. |
| */ |
| { .name = "DLOCKDOWN", .cp = 15, .crn = 9, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_data), |
| .resetvalue = 0 }, |
| { .name = "ILOCKDOWN", .cp = 15, .crn = 9, .crm = 0, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c9_insn), |
| .resetvalue = 0 }, |
| /* v6 doesn't have the cache ID registers but Linux reads them anyway */ |
| { .name = "DUMMY", .cp = 15, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = CP_ANY, |
| .access = PL1_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW, |
| .resetvalue = 0 }, |
| /* We don't implement pre-v7 debug but most CPUs had at least a DBGDIDR; |
| * implementing it as RAZ means the "debug architecture version" bits |
| * will read as a reserved value, which should cause Linux to not try |
| * to use the debug hardware. |
| */ |
| { .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL0_R, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| /* MMU TLB control. Note that the wildcarding means we cover not just |
| * the unified TLB ops but also the dside/iside/inner-shareable variants. |
| */ |
| { .name = "TLBIALL", .cp = 15, .crn = 8, .crm = CP_ANY, |
| .opc1 = CP_ANY, .opc2 = 0, .access = PL1_W, .writefn = tlbiall_write, |
| .type = ARM_CP_NO_RAW }, |
| { .name = "TLBIMVA", .cp = 15, .crn = 8, .crm = CP_ANY, |
| .opc1 = CP_ANY, .opc2 = 1, .access = PL1_W, .writefn = tlbimva_write, |
| .type = ARM_CP_NO_RAW }, |
| { .name = "TLBIASID", .cp = 15, .crn = 8, .crm = CP_ANY, |
| .opc1 = CP_ANY, .opc2 = 2, .access = PL1_W, .writefn = tlbiasid_write, |
| .type = ARM_CP_NO_RAW }, |
| { .name = "TLBIMVAA", .cp = 15, .crn = 8, .crm = CP_ANY, |
| .opc1 = CP_ANY, .opc2 = 3, .access = PL1_W, .writefn = tlbimvaa_write, |
| .type = ARM_CP_NO_RAW }, |
| { .name = "PRRR", .cp = 15, .crn = 10, .crm = 2, |
| .opc1 = 0, .opc2 = 0, .access = PL1_RW, .type = ARM_CP_NOP }, |
| { .name = "NMRR", .cp = 15, .crn = 10, .crm = 2, |
| .opc1 = 0, .opc2 = 1, .access = PL1_RW, .type = ARM_CP_NOP }, |
| REGINFO_SENTINEL |
| }; |
| |
| static void cpacr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| uint32_t mask = 0; |
| |
| /* In ARMv8 most bits of CPACR_EL1 are RES0. */ |
| if (!arm_feature(env, ARM_FEATURE_V8)) { |
| /* ARMv7 defines bits for unimplemented coprocessors as RAZ/WI. |
| * ASEDIS [31] and D32DIS [30] are both UNK/SBZP without VFP. |
| * TRCDIS [28] is RAZ/WI since we do not implement a trace macrocell. |
| */ |
| if (cpu_isar_feature(aa32_vfp_simd, env_archcpu(env))) { |
| /* VFP coprocessor: cp10 & cp11 [23:20] */ |
| mask |= (1 << 31) | (1 << 30) | (0xf << 20); |
| |
| if (!arm_feature(env, ARM_FEATURE_NEON)) { |
| /* ASEDIS [31] bit is RAO/WI */ |
| value |= (1 << 31); |
| } |
| |
| /* VFPv3 and upwards with NEON implement 32 double precision |
| * registers (D0-D31). |
| */ |
| if (!cpu_isar_feature(aa32_simd_r32, env_archcpu(env))) { |
| /* D32DIS [30] is RAO/WI if D16-31 are not implemented. */ |
| value |= (1 << 30); |
| } |
| } |
| value &= mask; |
| } |
| |
| /* |
| * For A-profile AArch32 EL3 (but not M-profile secure mode), if NSACR.CP10 |
| * is 0 then CPACR.{CP11,CP10} ignore writes and read as 0b00. |
| */ |
| if (arm_feature(env, ARM_FEATURE_EL3) && !arm_el_is_aa64(env, 3) && |
| !arm_is_secure(env) && !extract32(env->cp15.nsacr, 10, 1)) { |
| value &= ~(0xf << 20); |
| value |= env->cp15.cpacr_el1 & (0xf << 20); |
| } |
| |
| env->cp15.cpacr_el1 = value; |
| } |
| |
| static uint64_t cpacr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| /* |
| * For A-profile AArch32 EL3 (but not M-profile secure mode), if NSACR.CP10 |
| * is 0 then CPACR.{CP11,CP10} ignore writes and read as 0b00. |
| */ |
| uint64_t value = env->cp15.cpacr_el1; |
| |
| if (arm_feature(env, ARM_FEATURE_EL3) && !arm_el_is_aa64(env, 3) && |
| !arm_is_secure(env) && !extract32(env->cp15.nsacr, 10, 1)) { |
| value &= ~(0xf << 20); |
| } |
| return value; |
| } |
| |
| |
| static void cpacr_reset(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| /* Call cpacr_write() so that we reset with the correct RAO bits set |
| * for our CPU features. |
| */ |
| cpacr_write(env, ri, 0); |
| } |
| |
| static CPAccessResult cpacr_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| /* Check if CPACR accesses are to be trapped to EL2 */ |
| if (arm_current_el(env) == 1 && arm_is_el2_enabled(env) && |
| (env->cp15.cptr_el[2] & CPTR_TCPAC)) { |
| return CP_ACCESS_TRAP_EL2; |
| /* Check if CPACR accesses are to be trapped to EL3 */ |
| } else if (arm_current_el(env) < 3 && |
| (env->cp15.cptr_el[3] & CPTR_TCPAC)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult cptr_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* Check if CPTR accesses are set to trap to EL3 */ |
| if (arm_current_el(env) == 2 && (env->cp15.cptr_el[3] & CPTR_TCPAC)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static const ARMCPRegInfo v6_cp_reginfo[] = { |
| /* prefetch by MVA in v6, NOP in v7 */ |
| { .name = "MVA_prefetch", |
| .cp = 15, .crn = 7, .crm = 13, .opc1 = 0, .opc2 = 1, |
| .access = PL1_W, .type = ARM_CP_NOP }, |
| /* We need to break the TB after ISB to execute self-modifying code |
| * correctly and also to take any pending interrupts immediately. |
| * So use arm_cp_write_ignore() function instead of ARM_CP_NOP flag. |
| */ |
| { .name = "ISB", .cp = 15, .crn = 7, .crm = 5, .opc1 = 0, .opc2 = 4, |
| .access = PL0_W, .type = ARM_CP_NO_RAW, .writefn = arm_cp_write_ignore }, |
| { .name = "DSB", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 4, |
| .access = PL0_W, .type = ARM_CP_NOP }, |
| { .name = "DMB", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 5, |
| .access = PL0_W, .type = ARM_CP_NOP }, |
| { .name = "IFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 2, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ifar_s), |
| offsetof(CPUARMState, cp15.ifar_ns) }, |
| .resetvalue = 0, }, |
| /* Watchpoint Fault Address Register : should actually only be present |
| * for 1136, 1176, 11MPCore. |
| */ |
| { .name = "WFAR", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0, }, |
| { .name = "CPACR", .state = ARM_CP_STATE_BOTH, .opc0 = 3, |
| .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 2, .accessfn = cpacr_access, |
| .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.cpacr_el1), |
| .resetfn = cpacr_reset, .writefn = cpacr_write, .readfn = cpacr_read }, |
| REGINFO_SENTINEL |
| }; |
| |
| typedef struct pm_event { |
| uint16_t number; /* PMEVTYPER.evtCount is 16 bits wide */ |
| /* If the event is supported on this CPU (used to generate PMCEID[01]) */ |
| bool (*supported)(CPUARMState *); |
| /* |
| * Retrieve the current count of the underlying event. The programmed |
| * counters hold a difference from the return value from this function |
| */ |
| uint64_t (*get_count)(CPUARMState *); |
| /* |
| * Return how many nanoseconds it will take (at a minimum) for count events |
| * to occur. A negative value indicates the counter will never overflow, or |
| * that the counter has otherwise arranged for the overflow bit to be set |
| * and the PMU interrupt to be raised on overflow. |
| */ |
| int64_t (*ns_per_count)(uint64_t); |
| } pm_event; |
| |
| static bool event_always_supported(CPUARMState *env) |
| { |
| return true; |
| } |
| |
| static uint64_t swinc_get_count(CPUARMState *env) |
| { |
| /* |
| * SW_INCR events are written directly to the pmevcntr's by writes to |
| * PMSWINC, so there is no underlying count maintained by the PMU itself |
| */ |
| return 0; |
| } |
| |
| static int64_t swinc_ns_per(uint64_t ignored) |
| { |
| return -1; |
| } |
| |
| /* |
| * Return the underlying cycle count for the PMU cycle counters. If we're in |
| * usermode, simply return 0. |
| */ |
| static uint64_t cycles_get_count(CPUARMState *env) |
| { |
| #ifndef CONFIG_USER_ONLY |
| return muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL), |
| ARM_CPU_FREQ, NANOSECONDS_PER_SECOND); |
| #else |
| return cpu_get_host_ticks(); |
| #endif |
| } |
| |
| #ifndef CONFIG_USER_ONLY |
| static int64_t cycles_ns_per(uint64_t cycles) |
| { |
| return (ARM_CPU_FREQ / NANOSECONDS_PER_SECOND) * cycles; |
| } |
| |
| static bool instructions_supported(CPUARMState *env) |
| { |
| return icount_enabled() == 1; /* Precise instruction counting */ |
| } |
| |
| static uint64_t instructions_get_count(CPUARMState *env) |
| { |
| return (uint64_t)icount_get_raw(); |
| } |
| |
| static int64_t instructions_ns_per(uint64_t icount) |
| { |
| return icount_to_ns((int64_t)icount); |
| } |
| #endif |
| |
| static bool pmu_8_1_events_supported(CPUARMState *env) |
| { |
| /* For events which are supported in any v8.1 PMU */ |
| return cpu_isar_feature(any_pmu_8_1, env_archcpu(env)); |
| } |
| |
| static bool pmu_8_4_events_supported(CPUARMState *env) |
| { |
| /* For events which are supported in any v8.1 PMU */ |
| return cpu_isar_feature(any_pmu_8_4, env_archcpu(env)); |
| } |
| |
| static uint64_t zero_event_get_count(CPUARMState *env) |
| { |
| /* For events which on QEMU never fire, so their count is always zero */ |
| return 0; |
| } |
| |
| static int64_t zero_event_ns_per(uint64_t cycles) |
| { |
| /* An event which never fires can never overflow */ |
| return -1; |
| } |
| |
| static const pm_event pm_events[] = { |
| { .number = 0x000, /* SW_INCR */ |
| .supported = event_always_supported, |
| .get_count = swinc_get_count, |
| .ns_per_count = swinc_ns_per, |
| }, |
| #ifndef CONFIG_USER_ONLY |
| { .number = 0x008, /* INST_RETIRED, Instruction architecturally executed */ |
| .supported = instructions_supported, |
| .get_count = instructions_get_count, |
| .ns_per_count = instructions_ns_per, |
| }, |
| { .number = 0x011, /* CPU_CYCLES, Cycle */ |
| .supported = event_always_supported, |
| .get_count = cycles_get_count, |
| .ns_per_count = cycles_ns_per, |
| }, |
| #endif |
| { .number = 0x023, /* STALL_FRONTEND */ |
| .supported = pmu_8_1_events_supported, |
| .get_count = zero_event_get_count, |
| .ns_per_count = zero_event_ns_per, |
| }, |
| { .number = 0x024, /* STALL_BACKEND */ |
| .supported = pmu_8_1_events_supported, |
| .get_count = zero_event_get_count, |
| .ns_per_count = zero_event_ns_per, |
| }, |
| { .number = 0x03c, /* STALL */ |
| .supported = pmu_8_4_events_supported, |
| .get_count = zero_event_get_count, |
| .ns_per_count = zero_event_ns_per, |
| }, |
| }; |
| |
| /* |
| * Note: Before increasing MAX_EVENT_ID beyond 0x3f into the 0x40xx range of |
| * events (i.e. the statistical profiling extension), this implementation |
| * should first be updated to something sparse instead of the current |
| * supported_event_map[] array. |
| */ |
| #define MAX_EVENT_ID 0x3c |
| #define UNSUPPORTED_EVENT UINT16_MAX |
| static uint16_t supported_event_map[MAX_EVENT_ID + 1]; |
| |
| /* |
| * Called upon CPU initialization to initialize PMCEID[01]_EL0 and build a map |
| * of ARM event numbers to indices in our pm_events array. |
| * |
| * Note: Events in the 0x40XX range are not currently supported. |
| */ |
| void pmu_init(ARMCPU *cpu) |
| { |
| unsigned int i; |
| |
| /* |
| * Empty supported_event_map and cpu->pmceid[01] before adding supported |
| * events to them |
| */ |
| for (i = 0; i < ARRAY_SIZE(supported_event_map); i++) { |
| supported_event_map[i] = UNSUPPORTED_EVENT; |
| } |
| cpu->pmceid0 = 0; |
| cpu->pmceid1 = 0; |
| |
| for (i = 0; i < ARRAY_SIZE(pm_events); i++) { |
| const pm_event *cnt = &pm_events[i]; |
| assert(cnt->number <= MAX_EVENT_ID); |
| /* We do not currently support events in the 0x40xx range */ |
| assert(cnt->number <= 0x3f); |
| |
| if (cnt->supported(&cpu->env)) { |
| supported_event_map[cnt->number] = i; |
| uint64_t event_mask = 1ULL << (cnt->number & 0x1f); |
| if (cnt->number & 0x20) { |
| cpu->pmceid1 |= event_mask; |
| } else { |
| cpu->pmceid0 |= event_mask; |
| } |
| } |
| } |
| } |
| |
| /* |
| * Check at runtime whether a PMU event is supported for the current machine |
| */ |
| static bool event_supported(uint16_t number) |
| { |
| if (number > MAX_EVENT_ID) { |
| return false; |
| } |
| return supported_event_map[number] != UNSUPPORTED_EVENT; |
| } |
| |
| static CPAccessResult pmreg_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* Performance monitor registers user accessibility is controlled |
| * by PMUSERENR. MDCR_EL2.TPM and MDCR_EL3.TPM allow configurable |
| * trapping to EL2 or EL3 for other accesses. |
| */ |
| int el = arm_current_el(env); |
| uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); |
| |
| if (el == 0 && !(env->cp15.c9_pmuserenr & 1)) { |
| return CP_ACCESS_TRAP; |
| } |
| if (el < 2 && (mdcr_el2 & MDCR_TPM)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| if (el < 3 && (env->cp15.mdcr_el3 & MDCR_TPM)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult pmreg_access_xevcntr(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* ER: event counter read trap control */ |
| if (arm_feature(env, ARM_FEATURE_V8) |
| && arm_current_el(env) == 0 |
| && (env->cp15.c9_pmuserenr & (1 << 3)) != 0 |
| && isread) { |
| return CP_ACCESS_OK; |
| } |
| |
| return pmreg_access(env, ri, isread); |
| } |
| |
| static CPAccessResult pmreg_access_swinc(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* SW: software increment write trap control */ |
| if (arm_feature(env, ARM_FEATURE_V8) |
| && arm_current_el(env) == 0 |
| && (env->cp15.c9_pmuserenr & (1 << 1)) != 0 |
| && !isread) { |
| return CP_ACCESS_OK; |
| } |
| |
| return pmreg_access(env, ri, isread); |
| } |
| |
| static CPAccessResult pmreg_access_selr(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* ER: event counter read trap control */ |
| if (arm_feature(env, ARM_FEATURE_V8) |
| && arm_current_el(env) == 0 |
| && (env->cp15.c9_pmuserenr & (1 << 3)) != 0) { |
| return CP_ACCESS_OK; |
| } |
| |
| return pmreg_access(env, ri, isread); |
| } |
| |
| static CPAccessResult pmreg_access_ccntr(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* CR: cycle counter read trap control */ |
| if (arm_feature(env, ARM_FEATURE_V8) |
| && arm_current_el(env) == 0 |
| && (env->cp15.c9_pmuserenr & (1 << 2)) != 0 |
| && isread) { |
| return CP_ACCESS_OK; |
| } |
| |
| return pmreg_access(env, ri, isread); |
| } |
| |
| /* Returns true if the counter (pass 31 for PMCCNTR) should count events using |
| * the current EL, security state, and register configuration. |
| */ |
| static bool pmu_counter_enabled(CPUARMState *env, uint8_t counter) |
| { |
| uint64_t filter; |
| bool e, p, u, nsk, nsu, nsh, m; |
| bool enabled, prohibited, filtered; |
| bool secure = arm_is_secure(env); |
| int el = arm_current_el(env); |
| uint64_t mdcr_el2 = arm_mdcr_el2_eff(env); |
| uint8_t hpmn = mdcr_el2 & MDCR_HPMN; |
| |
| if (!arm_feature(env, ARM_FEATURE_PMU)) { |
| return false; |
| } |
| |
| if (!arm_feature(env, ARM_FEATURE_EL2) || |
| (counter < hpmn || counter == 31)) { |
| e = env->cp15.c9_pmcr & PMCRE; |
| } else { |
| e = mdcr_el2 & MDCR_HPME; |
| } |
| enabled = e && (env->cp15.c9_pmcnten & (1 << counter)); |
| |
| if (!secure) { |
| if (el == 2 && (counter < hpmn || counter == 31)) { |
| prohibited = mdcr_el2 & MDCR_HPMD; |
| } else { |
| prohibited = false; |
| } |
| } else { |
| prohibited = arm_feature(env, ARM_FEATURE_EL3) && |
| !(env->cp15.mdcr_el3 & MDCR_SPME); |
| } |
| |
| if (prohibited && counter == 31) { |
| prohibited = env->cp15.c9_pmcr & PMCRDP; |
| } |
| |
| if (counter == 31) { |
| filter = env->cp15.pmccfiltr_el0; |
| } else { |
| filter = env->cp15.c14_pmevtyper[counter]; |
| } |
| |
| p = filter & PMXEVTYPER_P; |
| u = filter & PMXEVTYPER_U; |
| nsk = arm_feature(env, ARM_FEATURE_EL3) && (filter & PMXEVTYPER_NSK); |
| nsu = arm_feature(env, ARM_FEATURE_EL3) && (filter & PMXEVTYPER_NSU); |
| nsh = arm_feature(env, ARM_FEATURE_EL2) && (filter & PMXEVTYPER_NSH); |
| m = arm_el_is_aa64(env, 1) && |
| arm_feature(env, ARM_FEATURE_EL3) && (filter & PMXEVTYPER_M); |
| |
| if (el == 0) { |
| filtered = secure ? u : u != nsu; |
| } else if (el == 1) { |
| filtered = secure ? p : p != nsk; |
| } else if (el == 2) { |
| filtered = !nsh; |
| } else { /* EL3 */ |
| filtered = m != p; |
| } |
| |
| if (counter != 31) { |
| /* |
| * If not checking PMCCNTR, ensure the counter is setup to an event we |
| * support |
| */ |
| uint16_t event = filter & PMXEVTYPER_EVTCOUNT; |
| if (!event_supported(event)) { |
| return false; |
| } |
| } |
| |
| return enabled && !prohibited && !filtered; |
| } |
| |
| static void pmu_update_irq(CPUARMState *env) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| qemu_set_irq(cpu->pmu_interrupt, (env->cp15.c9_pmcr & PMCRE) && |
| (env->cp15.c9_pminten & env->cp15.c9_pmovsr)); |
| } |
| |
| /* |
| * Ensure c15_ccnt is the guest-visible count so that operations such as |
| * enabling/disabling the counter or filtering, modifying the count itself, |
| * etc. can be done logically. This is essentially a no-op if the counter is |
| * not enabled at the time of the call. |
| */ |
| static void pmccntr_op_start(CPUARMState *env) |
| { |
| uint64_t cycles = cycles_get_count(env); |
| |
| if (pmu_counter_enabled(env, 31)) { |
| uint64_t eff_cycles = cycles; |
| if (env->cp15.c9_pmcr & PMCRD) { |
| /* Increment once every 64 processor clock cycles */ |
| eff_cycles /= 64; |
| } |
| |
| uint64_t new_pmccntr = eff_cycles - env->cp15.c15_ccnt_delta; |
| |
| uint64_t overflow_mask = env->cp15.c9_pmcr & PMCRLC ? \ |
| 1ull << 63 : 1ull << 31; |
| if (env->cp15.c15_ccnt & ~new_pmccntr & overflow_mask) { |
| env->cp15.c9_pmovsr |= (1 << 31); |
| pmu_update_irq(env); |
| } |
| |
| env->cp15.c15_ccnt = new_pmccntr; |
| } |
| env->cp15.c15_ccnt_delta = cycles; |
| } |
| |
| /* |
| * If PMCCNTR is enabled, recalculate the delta between the clock and the |
| * guest-visible count. A call to pmccntr_op_finish should follow every call to |
| * pmccntr_op_start. |
| */ |
| static void pmccntr_op_finish(CPUARMState *env) |
| { |
| if (pmu_counter_enabled(env, 31)) { |
| #ifndef CONFIG_USER_ONLY |
| /* Calculate when the counter will next overflow */ |
| uint64_t remaining_cycles = -env->cp15.c15_ccnt; |
| if (!(env->cp15.c9_pmcr & PMCRLC)) { |
| remaining_cycles = (uint32_t)remaining_cycles; |
| } |
| int64_t overflow_in = cycles_ns_per(remaining_cycles); |
| |
| if (overflow_in > 0) { |
| int64_t overflow_at = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + |
| overflow_in; |
| ARMCPU *cpu = env_archcpu(env); |
| timer_mod_anticipate_ns(cpu->pmu_timer, overflow_at); |
| } |
| #endif |
| |
| uint64_t prev_cycles = env->cp15.c15_ccnt_delta; |
| if (env->cp15.c9_pmcr & PMCRD) { |
| /* Increment once every 64 processor clock cycles */ |
| prev_cycles /= 64; |
| } |
| env->cp15.c15_ccnt_delta = prev_cycles - env->cp15.c15_ccnt; |
| } |
| } |
| |
| static void pmevcntr_op_start(CPUARMState *env, uint8_t counter) |
| { |
| |
| uint16_t event = env->cp15.c14_pmevtyper[counter] & PMXEVTYPER_EVTCOUNT; |
| uint64_t count = 0; |
| if (event_supported(event)) { |
| uint16_t event_idx = supported_event_map[event]; |
| count = pm_events[event_idx].get_count(env); |
| } |
| |
| if (pmu_counter_enabled(env, counter)) { |
| uint32_t new_pmevcntr = count - env->cp15.c14_pmevcntr_delta[counter]; |
| |
| if (env->cp15.c14_pmevcntr[counter] & ~new_pmevcntr & INT32_MIN) { |
| env->cp15.c9_pmovsr |= (1 << counter); |
| pmu_update_irq(env); |
| } |
| env->cp15.c14_pmevcntr[counter] = new_pmevcntr; |
| } |
| env->cp15.c14_pmevcntr_delta[counter] = count; |
| } |
| |
| static void pmevcntr_op_finish(CPUARMState *env, uint8_t counter) |
| { |
| if (pmu_counter_enabled(env, counter)) { |
| #ifndef CONFIG_USER_ONLY |
| uint16_t event = env->cp15.c14_pmevtyper[counter] & PMXEVTYPER_EVTCOUNT; |
| uint16_t event_idx = supported_event_map[event]; |
| uint64_t delta = UINT32_MAX - |
| (uint32_t)env->cp15.c14_pmevcntr[counter] + 1; |
| int64_t overflow_in = pm_events[event_idx].ns_per_count(delta); |
| |
| if (overflow_in > 0) { |
| int64_t overflow_at = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + |
| overflow_in; |
| ARMCPU *cpu = env_archcpu(env); |
| timer_mod_anticipate_ns(cpu->pmu_timer, overflow_at); |
| } |
| #endif |
| |
| env->cp15.c14_pmevcntr_delta[counter] -= |
| env->cp15.c14_pmevcntr[counter]; |
| } |
| } |
| |
| void pmu_op_start(CPUARMState *env) |
| { |
| unsigned int i; |
| pmccntr_op_start(env); |
| for (i = 0; i < pmu_num_counters(env); i++) { |
| pmevcntr_op_start(env, i); |
| } |
| } |
| |
| void pmu_op_finish(CPUARMState *env) |
| { |
| unsigned int i; |
| pmccntr_op_finish(env); |
| for (i = 0; i < pmu_num_counters(env); i++) { |
| pmevcntr_op_finish(env, i); |
| } |
| } |
| |
| void pmu_pre_el_change(ARMCPU *cpu, void *ignored) |
| { |
| pmu_op_start(&cpu->env); |
| } |
| |
| void pmu_post_el_change(ARMCPU *cpu, void *ignored) |
| { |
| pmu_op_finish(&cpu->env); |
| } |
| |
| void arm_pmu_timer_cb(void *opaque) |
| { |
| ARMCPU *cpu = opaque; |
| |
| /* |
| * Update all the counter values based on the current underlying counts, |
| * triggering interrupts to be raised, if necessary. pmu_op_finish() also |
| * has the effect of setting the cpu->pmu_timer to the next earliest time a |
| * counter may expire. |
| */ |
| pmu_op_start(&cpu->env); |
| pmu_op_finish(&cpu->env); |
| } |
| |
| static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| pmu_op_start(env); |
| |
| if (value & PMCRC) { |
| /* The counter has been reset */ |
| env->cp15.c15_ccnt = 0; |
| } |
| |
| if (value & PMCRP) { |
| unsigned int i; |
| for (i = 0; i < pmu_num_counters(env); i++) { |
| env->cp15.c14_pmevcntr[i] = 0; |
| } |
| } |
| |
| env->cp15.c9_pmcr &= ~PMCR_WRITEABLE_MASK; |
| env->cp15.c9_pmcr |= (value & PMCR_WRITEABLE_MASK); |
| |
| pmu_op_finish(env); |
| } |
| |
| static void pmswinc_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| unsigned int i; |
| for (i = 0; i < pmu_num_counters(env); i++) { |
| /* Increment a counter's count iff: */ |
| if ((value & (1 << i)) && /* counter's bit is set */ |
| /* counter is enabled and not filtered */ |
| pmu_counter_enabled(env, i) && |
| /* counter is SW_INCR */ |
| (env->cp15.c14_pmevtyper[i] & PMXEVTYPER_EVTCOUNT) == 0x0) { |
| pmevcntr_op_start(env, i); |
| |
| /* |
| * Detect if this write causes an overflow since we can't predict |
| * PMSWINC overflows like we can for other events |
| */ |
| uint32_t new_pmswinc = env->cp15.c14_pmevcntr[i] + 1; |
| |
| if (env->cp15.c14_pmevcntr[i] & ~new_pmswinc & INT32_MIN) { |
| env->cp15.c9_pmovsr |= (1 << i); |
| pmu_update_irq(env); |
| } |
| |
| env->cp15.c14_pmevcntr[i] = new_pmswinc; |
| |
| pmevcntr_op_finish(env, i); |
| } |
| } |
| } |
| |
| static uint64_t pmccntr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| uint64_t ret; |
| pmccntr_op_start(env); |
| ret = env->cp15.c15_ccnt; |
| pmccntr_op_finish(env); |
| return ret; |
| } |
| |
| static void pmselr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* The value of PMSELR.SEL affects the behavior of PMXEVTYPER and |
| * PMXEVCNTR. We allow [0..31] to be written to PMSELR here; in the |
| * meanwhile, we check PMSELR.SEL when PMXEVTYPER and PMXEVCNTR are |
| * accessed. |
| */ |
| env->cp15.c9_pmselr = value & 0x1f; |
| } |
| |
| static void pmccntr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| pmccntr_op_start(env); |
| env->cp15.c15_ccnt = value; |
| pmccntr_op_finish(env); |
| } |
| |
| static void pmccntr_write32(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| uint64_t cur_val = pmccntr_read(env, NULL); |
| |
| pmccntr_write(env, ri, deposit64(cur_val, 0, 32, value)); |
| } |
| |
| static void pmccfiltr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| pmccntr_op_start(env); |
| env->cp15.pmccfiltr_el0 = value & PMCCFILTR_EL0; |
| pmccntr_op_finish(env); |
| } |
| |
| static void pmccfiltr_write_a32(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| pmccntr_op_start(env); |
| /* M is not accessible from AArch32 */ |
| env->cp15.pmccfiltr_el0 = (env->cp15.pmccfiltr_el0 & PMCCFILTR_M) | |
| (value & PMCCFILTR); |
| pmccntr_op_finish(env); |
| } |
| |
| static uint64_t pmccfiltr_read_a32(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| /* M is not visible in AArch32 */ |
| return env->cp15.pmccfiltr_el0 & PMCCFILTR; |
| } |
| |
| static void pmcntenset_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| value &= pmu_counter_mask(env); |
| env->cp15.c9_pmcnten |= value; |
| } |
| |
| static void pmcntenclr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| value &= pmu_counter_mask(env); |
| env->cp15.c9_pmcnten &= ~value; |
| } |
| |
| static void pmovsr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| value &= pmu_counter_mask(env); |
| env->cp15.c9_pmovsr &= ~value; |
| pmu_update_irq(env); |
| } |
| |
| static void pmovsset_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| value &= pmu_counter_mask(env); |
| env->cp15.c9_pmovsr |= value; |
| pmu_update_irq(env); |
| } |
| |
| static void pmevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value, const uint8_t counter) |
| { |
| if (counter == 31) { |
| pmccfiltr_write(env, ri, value); |
| } else if (counter < pmu_num_counters(env)) { |
| pmevcntr_op_start(env, counter); |
| |
| /* |
| * If this counter's event type is changing, store the current |
| * underlying count for the new type in c14_pmevcntr_delta[counter] so |
| * pmevcntr_op_finish has the correct baseline when it converts back to |
| * a delta. |
| */ |
| uint16_t old_event = env->cp15.c14_pmevtyper[counter] & |
| PMXEVTYPER_EVTCOUNT; |
| uint16_t new_event = value & PMXEVTYPER_EVTCOUNT; |
| if (old_event != new_event) { |
| uint64_t count = 0; |
| if (event_supported(new_event)) { |
| uint16_t event_idx = supported_event_map[new_event]; |
| count = pm_events[event_idx].get_count(env); |
| } |
| env->cp15.c14_pmevcntr_delta[counter] = count; |
| } |
| |
| env->cp15.c14_pmevtyper[counter] = value & PMXEVTYPER_MASK; |
| pmevcntr_op_finish(env, counter); |
| } |
| /* Attempts to access PMXEVTYPER are CONSTRAINED UNPREDICTABLE when |
| * PMSELR value is equal to or greater than the number of implemented |
| * counters, but not equal to 0x1f. We opt to behave as a RAZ/WI. |
| */ |
| } |
| |
| static uint64_t pmevtyper_read(CPUARMState *env, const ARMCPRegInfo *ri, |
| const uint8_t counter) |
| { |
| if (counter == 31) { |
| return env->cp15.pmccfiltr_el0; |
| } else if (counter < pmu_num_counters(env)) { |
| return env->cp15.c14_pmevtyper[counter]; |
| } else { |
| /* |
| * We opt to behave as a RAZ/WI when attempts to access PMXEVTYPER |
| * are CONSTRAINED UNPREDICTABLE. See comments in pmevtyper_write(). |
| */ |
| return 0; |
| } |
| } |
| |
| static void pmevtyper_writefn(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); |
| pmevtyper_write(env, ri, value, counter); |
| } |
| |
| static void pmevtyper_rawwrite(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); |
| env->cp15.c14_pmevtyper[counter] = value; |
| |
| /* |
| * pmevtyper_rawwrite is called between a pair of pmu_op_start and |
| * pmu_op_finish calls when loading saved state for a migration. Because |
| * we're potentially updating the type of event here, the value written to |
| * c14_pmevcntr_delta by the preceeding pmu_op_start call may be for a |
| * different counter type. Therefore, we need to set this value to the |
| * current count for the counter type we're writing so that pmu_op_finish |
| * has the correct count for its calculation. |
| */ |
| uint16_t event = value & PMXEVTYPER_EVTCOUNT; |
| if (event_supported(event)) { |
| uint16_t event_idx = supported_event_map[event]; |
| env->cp15.c14_pmevcntr_delta[counter] = |
| pm_events[event_idx].get_count(env); |
| } |
| } |
| |
| static uint64_t pmevtyper_readfn(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); |
| return pmevtyper_read(env, ri, counter); |
| } |
| |
| static void pmxevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| pmevtyper_write(env, ri, value, env->cp15.c9_pmselr & 31); |
| } |
| |
| static uint64_t pmxevtyper_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return pmevtyper_read(env, ri, env->cp15.c9_pmselr & 31); |
| } |
| |
| static void pmevcntr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value, uint8_t counter) |
| { |
| if (counter < pmu_num_counters(env)) { |
| pmevcntr_op_start(env, counter); |
| env->cp15.c14_pmevcntr[counter] = value; |
| pmevcntr_op_finish(env, counter); |
| } |
| /* |
| * We opt to behave as a RAZ/WI when attempts to access PM[X]EVCNTR |
| * are CONSTRAINED UNPREDICTABLE. |
| */ |
| } |
| |
| static uint64_t pmevcntr_read(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint8_t counter) |
| { |
| if (counter < pmu_num_counters(env)) { |
| uint64_t ret; |
| pmevcntr_op_start(env, counter); |
| ret = env->cp15.c14_pmevcntr[counter]; |
| pmevcntr_op_finish(env, counter); |
| return ret; |
| } else { |
| /* We opt to behave as a RAZ/WI when attempts to access PM[X]EVCNTR |
| * are CONSTRAINED UNPREDICTABLE. */ |
| return 0; |
| } |
| } |
| |
| static void pmevcntr_writefn(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); |
| pmevcntr_write(env, ri, value, counter); |
| } |
| |
| static uint64_t pmevcntr_readfn(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); |
| return pmevcntr_read(env, ri, counter); |
| } |
| |
| static void pmevcntr_rawwrite(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); |
| assert(counter < pmu_num_counters(env)); |
| env->cp15.c14_pmevcntr[counter] = value; |
| pmevcntr_write(env, ri, value, counter); |
| } |
| |
| static uint64_t pmevcntr_rawread(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| uint8_t counter = ((ri->crm & 3) << 3) | (ri->opc2 & 7); |
| assert(counter < pmu_num_counters(env)); |
| return env->cp15.c14_pmevcntr[counter]; |
| } |
| |
| static void pmxevcntr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| pmevcntr_write(env, ri, value, env->cp15.c9_pmselr & 31); |
| } |
| |
| static uint64_t pmxevcntr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return pmevcntr_read(env, ri, env->cp15.c9_pmselr & 31); |
| } |
| |
| static void pmuserenr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| env->cp15.c9_pmuserenr = value & 0xf; |
| } else { |
| env->cp15.c9_pmuserenr = value & 1; |
| } |
| } |
| |
| static void pmintenset_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* We have no event counters so only the C bit can be changed */ |
| value &= pmu_counter_mask(env); |
| env->cp15.c9_pminten |= value; |
| pmu_update_irq(env); |
| } |
| |
| static void pmintenclr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| value &= pmu_counter_mask(env); |
| env->cp15.c9_pminten &= ~value; |
| pmu_update_irq(env); |
| } |
| |
| static void vbar_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Note that even though the AArch64 view of this register has bits |
| * [10:0] all RES0 we can only mask the bottom 5, to comply with the |
| * architectural requirements for bits which are RES0 only in some |
| * contexts. (ARMv8 would permit us to do no masking at all, but ARMv7 |
| * requires the bottom five bits to be RAZ/WI because they're UNK/SBZP.) |
| */ |
| raw_write(env, ri, value & ~0x1FULL); |
| } |
| |
| static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) |
| { |
| /* Begin with base v8.0 state. */ |
| uint32_t valid_mask = 0x3fff; |
| ARMCPU *cpu = env_archcpu(env); |
| |
| if (ri->state == ARM_CP_STATE_AA64) { |
| if (arm_feature(env, ARM_FEATURE_AARCH64) && |
| !cpu_isar_feature(aa64_aa32_el1, cpu)) { |
| value |= SCR_FW | SCR_AW; /* these two bits are RES1. */ |
| } |
| valid_mask &= ~SCR_NET; |
| |
| if (cpu_isar_feature(aa64_lor, cpu)) { |
| valid_mask |= SCR_TLOR; |
| } |
| if (cpu_isar_feature(aa64_pauth, cpu)) { |
| valid_mask |= SCR_API | SCR_APK; |
| } |
| if (cpu_isar_feature(aa64_sel2, cpu)) { |
| valid_mask |= SCR_EEL2; |
| } |
| if (cpu_isar_feature(aa64_mte, cpu)) { |
| valid_mask |= SCR_ATA; |
| } |
| } else { |
| valid_mask &= ~(SCR_RW | SCR_ST); |
| } |
| |
| if (!arm_feature(env, ARM_FEATURE_EL2)) { |
| valid_mask &= ~SCR_HCE; |
| |
| /* On ARMv7, SMD (or SCD as it is called in v7) is only |
| * supported if EL2 exists. The bit is UNK/SBZP when |
| * EL2 is unavailable. In QEMU ARMv7, we force it to always zero |
| * when EL2 is unavailable. |
| * On ARMv8, this bit is always available. |
| */ |
| if (arm_feature(env, ARM_FEATURE_V7) && |
| !arm_feature(env, ARM_FEATURE_V8)) { |
| valid_mask &= ~SCR_SMD; |
| } |
| } |
| |
| /* Clear all-context RES0 bits. */ |
| value &= valid_mask; |
| raw_write(env, ri, value); |
| } |
| |
| static void scr_reset(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| /* |
| * scr_write will set the RES1 bits on an AArch64-only CPU. |
| * The reset value will be 0x30 on an AArch64-only CPU and 0 otherwise. |
| */ |
| scr_write(env, ri, 0); |
| } |
| |
| static CPAccessResult access_aa64_tid2(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TID2)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static uint64_t ccsidr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| /* Acquire the CSSELR index from the bank corresponding to the CCSIDR |
| * bank |
| */ |
| uint32_t index = A32_BANKED_REG_GET(env, csselr, |
| ri->secure & ARM_CP_SECSTATE_S); |
| |
| return cpu->ccsidr[index]; |
| } |
| |
| static void csselr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| raw_write(env, ri, value & 0xf); |
| } |
| |
| static uint64_t isr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| CPUState *cs = env_cpu(env); |
| bool el1 = arm_current_el(env) == 1; |
| uint64_t hcr_el2 = el1 ? arm_hcr_el2_eff(env) : 0; |
| uint64_t ret = 0; |
| |
| if (hcr_el2 & HCR_IMO) { |
| if (cs->interrupt_request & CPU_INTERRUPT_VIRQ) { |
| ret |= CPSR_I; |
| } |
| } else { |
| if (cs->interrupt_request & CPU_INTERRUPT_HARD) { |
| ret |= CPSR_I; |
| } |
| } |
| |
| if (hcr_el2 & HCR_FMO) { |
| if (cs->interrupt_request & CPU_INTERRUPT_VFIQ) { |
| ret |= CPSR_F; |
| } |
| } else { |
| if (cs->interrupt_request & CPU_INTERRUPT_FIQ) { |
| ret |= CPSR_F; |
| } |
| } |
| |
| /* External aborts are not possible in QEMU so A bit is always clear */ |
| return ret; |
| } |
| |
| static CPAccessResult access_aa64_tid1(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TID1)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult access_aa32_tid1(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| return access_aa64_tid1(env, ri, isread); |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static const ARMCPRegInfo v7_cp_reginfo[] = { |
| /* the old v6 WFI, UNPREDICTABLE in v7 but we choose to NOP */ |
| { .name = "NOP", .cp = 15, .crn = 7, .crm = 0, .opc1 = 0, .opc2 = 4, |
| .access = PL1_W, .type = ARM_CP_NOP }, |
| /* Performance monitors are implementation defined in v7, |
| * but with an ARM recommended set of registers, which we |
| * follow. |
| * |
| * Performance registers fall into three categories: |
| * (a) always UNDEF in PL0, RW in PL1 (PMINTENSET, PMINTENCLR) |
| * (b) RO in PL0 (ie UNDEF on write), RW in PL1 (PMUSERENR) |
| * (c) UNDEF in PL0 if PMUSERENR.EN==0, otherwise accessible (all others) |
| * For the cases controlled by PMUSERENR we must set .access to PL0_RW |
| * or PL0_RO as appropriate and then check PMUSERENR in the helper fn. |
| */ |
| { .name = "PMCNTENSET", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 1, |
| .access = PL0_RW, .type = ARM_CP_ALIAS, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmcnten), |
| .writefn = pmcntenset_write, |
| .accessfn = pmreg_access, |
| .raw_writefn = raw_write }, |
| { .name = "PMCNTENSET_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 1, |
| .access = PL0_RW, .accessfn = pmreg_access, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcnten), .resetvalue = 0, |
| .writefn = pmcntenset_write, .raw_writefn = raw_write }, |
| { .name = "PMCNTENCLR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 2, |
| .access = PL0_RW, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmcnten), |
| .accessfn = pmreg_access, |
| .writefn = pmcntenclr_write, |
| .type = ARM_CP_ALIAS }, |
| { .name = "PMCNTENCLR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 2, |
| .access = PL0_RW, .accessfn = pmreg_access, |
| .type = ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcnten), |
| .writefn = pmcntenclr_write }, |
| { .name = "PMOVSR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 3, |
| .access = PL0_RW, .type = ARM_CP_IO, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmovsr), |
| .accessfn = pmreg_access, |
| .writefn = pmovsr_write, |
| .raw_writefn = raw_write }, |
| { .name = "PMOVSCLR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 3, |
| .access = PL0_RW, .accessfn = pmreg_access, |
| .type = ARM_CP_ALIAS | ARM_CP_IO, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr), |
| .writefn = pmovsr_write, |
| .raw_writefn = raw_write }, |
| { .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4, |
| .access = PL0_W, .accessfn = pmreg_access_swinc, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, |
| .writefn = pmswinc_write }, |
| { .name = "PMSWINC_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 4, |
| .access = PL0_W, .accessfn = pmreg_access_swinc, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, |
| .writefn = pmswinc_write }, |
| { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5, |
| .access = PL0_RW, .type = ARM_CP_ALIAS, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmselr), |
| .accessfn = pmreg_access_selr, .writefn = pmselr_write, |
| .raw_writefn = raw_write}, |
| { .name = "PMSELR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 5, |
| .access = PL0_RW, .accessfn = pmreg_access_selr, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pmselr), |
| .writefn = pmselr_write, .raw_writefn = raw_write, }, |
| { .name = "PMCCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 0, |
| .access = PL0_RW, .resetvalue = 0, .type = ARM_CP_ALIAS | ARM_CP_IO, |
| .readfn = pmccntr_read, .writefn = pmccntr_write32, |
| .accessfn = pmreg_access_ccntr }, |
| { .name = "PMCCNTR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 0, |
| .access = PL0_RW, .accessfn = pmreg_access_ccntr, |
| .type = ARM_CP_IO, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_ccnt), |
| .readfn = pmccntr_read, .writefn = pmccntr_write, |
| .raw_readfn = raw_read, .raw_writefn = raw_write, }, |
| { .name = "PMCCFILTR", .cp = 15, .opc1 = 0, .crn = 14, .crm = 15, .opc2 = 7, |
| .writefn = pmccfiltr_write_a32, .readfn = pmccfiltr_read_a32, |
| .access = PL0_RW, .accessfn = pmreg_access, |
| .type = ARM_CP_ALIAS | ARM_CP_IO, |
| .resetvalue = 0, }, |
| { .name = "PMCCFILTR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 15, .opc2 = 7, |
| .writefn = pmccfiltr_write, .raw_writefn = raw_write, |
| .access = PL0_RW, .accessfn = pmreg_access, |
| .type = ARM_CP_IO, |
| .fieldoffset = offsetof(CPUARMState, cp15.pmccfiltr_el0), |
| .resetvalue = 0, }, |
| { .name = "PMXEVTYPER", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 1, |
| .access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO, |
| .accessfn = pmreg_access, |
| .writefn = pmxevtyper_write, .readfn = pmxevtyper_read }, |
| { .name = "PMXEVTYPER_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 1, |
| .access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO, |
| .accessfn = pmreg_access, |
| .writefn = pmxevtyper_write, .readfn = pmxevtyper_read }, |
| { .name = "PMXEVCNTR", .cp = 15, .crn = 9, .crm = 13, .opc1 = 0, .opc2 = 2, |
| .access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO, |
| .accessfn = pmreg_access_xevcntr, |
| .writefn = pmxevcntr_write, .readfn = pmxevcntr_read }, |
| { .name = "PMXEVCNTR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 13, .opc2 = 2, |
| .access = PL0_RW, .type = ARM_CP_NO_RAW | ARM_CP_IO, |
| .accessfn = pmreg_access_xevcntr, |
| .writefn = pmxevcntr_write, .readfn = pmxevcntr_read }, |
| { .name = "PMUSERENR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 0, |
| .access = PL0_R | PL1_RW, .accessfn = access_tpm, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmuserenr), |
| .resetvalue = 0, |
| .writefn = pmuserenr_write, .raw_writefn = raw_write }, |
| { .name = "PMUSERENR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 14, .opc2 = 0, |
| .access = PL0_R | PL1_RW, .accessfn = access_tpm, .type = ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pmuserenr), |
| .resetvalue = 0, |
| .writefn = pmuserenr_write, .raw_writefn = raw_write }, |
| { .name = "PMINTENSET", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tpm, |
| .type = ARM_CP_ALIAS | ARM_CP_IO, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pminten), |
| .resetvalue = 0, |
| .writefn = pmintenset_write, .raw_writefn = raw_write }, |
| { .name = "PMINTENSET_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tpm, |
| .type = ARM_CP_IO, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten), |
| .writefn = pmintenset_write, .raw_writefn = raw_write, |
| .resetvalue = 0x0 }, |
| { .name = "PMINTENCLR", .cp = 15, .crn = 9, .crm = 14, .opc1 = 0, .opc2 = 2, |
| .access = PL1_RW, .accessfn = access_tpm, |
| .type = ARM_CP_ALIAS | ARM_CP_IO | ARM_CP_NO_RAW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten), |
| .writefn = pmintenclr_write, }, |
| { .name = "PMINTENCLR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 2, |
| .access = PL1_RW, .accessfn = access_tpm, |
| .type = ARM_CP_ALIAS | ARM_CP_IO | ARM_CP_NO_RAW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pminten), |
| .writefn = pmintenclr_write }, |
| { .name = "CCSIDR", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 0, |
| .access = PL1_R, |
| .accessfn = access_aa64_tid2, |
| .readfn = ccsidr_read, .type = ARM_CP_NO_RAW }, |
| { .name = "CSSELR", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 2, .opc2 = 0, |
| .access = PL1_RW, |
| .accessfn = access_aa64_tid2, |
| .writefn = csselr_write, .resetvalue = 0, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.csselr_s), |
| offsetof(CPUARMState, cp15.csselr_ns) } }, |
| /* Auxiliary ID register: this actually has an IMPDEF value but for now |
| * just RAZ for all cores: |
| */ |
| { .name = "AIDR", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 7, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid1, |
| .resetvalue = 0 }, |
| /* Auxiliary fault status registers: these also are IMPDEF, and we |
| * choose to RAZ/WI for all cores. |
| */ |
| { .name = "AFSR0_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "AFSR1_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 1, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| /* MAIR can just read-as-written because we don't implement caches |
| * and so don't need to care about memory attributes. |
| */ |
| { .name = "MAIR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .fieldoffset = offsetof(CPUARMState, cp15.mair_el[1]), |
| .resetvalue = 0 }, |
| { .name = "MAIR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 10, .crm = 2, .opc2 = 0, |
| .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.mair_el[3]), |
| .resetvalue = 0 }, |
| /* For non-long-descriptor page tables these are PRRR and NMRR; |
| * regardless they still act as reads-as-written for QEMU. |
| */ |
| /* MAIR0/1 are defined separately from their 64-bit counterpart which |
| * allows them to assign the correct fieldoffset based on the endianness |
| * handled in the field definitions. |
| */ |
| { .name = "MAIR0", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.mair0_s), |
| offsetof(CPUARMState, cp15.mair0_ns) }, |
| .resetfn = arm_cp_reset_ignore }, |
| { .name = "MAIR1", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.mair1_s), |
| offsetof(CPUARMState, cp15.mair1_ns) }, |
| .resetfn = arm_cp_reset_ignore }, |
| { .name = "ISR_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 1, .opc2 = 0, |
| .type = ARM_CP_NO_RAW, .access = PL1_R, .readfn = isr_read }, |
| /* 32 bit ITLB invalidates */ |
| { .name = "ITLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 0, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbiall_write }, |
| { .name = "ITLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 1, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbimva_write }, |
| { .name = "ITLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 2, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbiasid_write }, |
| /* 32 bit DTLB invalidates */ |
| { .name = "DTLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 0, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbiall_write }, |
| { .name = "DTLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 1, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbimva_write }, |
| { .name = "DTLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 2, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbiasid_write }, |
| /* 32 bit TLB invalidates */ |
| { .name = "TLBIALL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 0, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbiall_write }, |
| { .name = "TLBIMVA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 1, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbimva_write }, |
| { .name = "TLBIASID", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 2, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbiasid_write }, |
| { .name = "TLBIMVAA", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 3, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbimvaa_write }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo v7mp_cp_reginfo[] = { |
| /* 32 bit TLB invalidates, Inner Shareable */ |
| { .name = "TLBIALLIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbiall_is_write }, |
| { .name = "TLBIMVAIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 1, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbimva_is_write }, |
| { .name = "TLBIASIDIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 2, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbiasid_is_write }, |
| { .name = "TLBIMVAAIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbimvaa_is_write }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo pmovsset_cp_reginfo[] = { |
| /* PMOVSSET is not implemented in v7 before v7ve */ |
| { .name = "PMOVSSET", .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 3, |
| .access = PL0_RW, .accessfn = pmreg_access, |
| .type = ARM_CP_ALIAS | ARM_CP_IO, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmovsr), |
| .writefn = pmovsset_write, |
| .raw_writefn = raw_write }, |
| { .name = "PMOVSSET_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 14, .opc2 = 3, |
| .access = PL0_RW, .accessfn = pmreg_access, |
| .type = ARM_CP_ALIAS | ARM_CP_IO, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pmovsr), |
| .writefn = pmovsset_write, |
| .raw_writefn = raw_write }, |
| REGINFO_SENTINEL |
| }; |
| |
| static void teecr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| value &= 1; |
| env->teecr = value; |
| } |
| |
| static CPAccessResult teecr_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* |
| * HSTR.TTEE only exists in v7A, not v8A, but v8A doesn't have T2EE |
| * at all, so we don't need to check whether we're v8A. |
| */ |
| if (arm_current_el(env) < 2 && !arm_is_secure_below_el3(env) && |
| (env->cp15.hstr_el2 & HSTR_TTEE)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult teehbr_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 0 && (env->teecr & 1)) { |
| return CP_ACCESS_TRAP; |
| } |
| return teecr_access(env, ri, isread); |
| } |
| |
| static const ARMCPRegInfo t2ee_cp_reginfo[] = { |
| { .name = "TEECR", .cp = 14, .crn = 0, .crm = 0, .opc1 = 6, .opc2 = 0, |
| .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, teecr), |
| .resetvalue = 0, |
| .writefn = teecr_write, .accessfn = teecr_access }, |
| { .name = "TEEHBR", .cp = 14, .crn = 1, .crm = 0, .opc1 = 6, .opc2 = 0, |
| .access = PL0_RW, .fieldoffset = offsetof(CPUARMState, teehbr), |
| .accessfn = teehbr_access, .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo v6k_cp_reginfo[] = { |
| { .name = "TPIDR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .opc2 = 2, .crn = 13, .crm = 0, |
| .access = PL0_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.tpidr_el[0]), .resetvalue = 0 }, |
| { .name = "TPIDRURW", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 2, |
| .access = PL0_RW, |
| .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tpidrurw_s), |
| offsetoflow32(CPUARMState, cp15.tpidrurw_ns) }, |
| .resetfn = arm_cp_reset_ignore }, |
| { .name = "TPIDRRO_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .opc2 = 3, .crn = 13, .crm = 0, |
| .access = PL0_R|PL1_W, |
| .fieldoffset = offsetof(CPUARMState, cp15.tpidrro_el[0]), |
| .resetvalue = 0}, |
| { .name = "TPIDRURO", .cp = 15, .crn = 13, .crm = 0, .opc1 = 0, .opc2 = 3, |
| .access = PL0_R|PL1_W, |
| .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tpidruro_s), |
| offsetoflow32(CPUARMState, cp15.tpidruro_ns) }, |
| .resetfn = arm_cp_reset_ignore }, |
| { .name = "TPIDR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .opc2 = 4, .crn = 13, .crm = 0, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.tpidr_el[1]), .resetvalue = 0 }, |
| { .name = "TPIDRPRW", .opc1 = 0, .cp = 15, .crn = 13, .crm = 0, .opc2 = 4, |
| .access = PL1_RW, |
| .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.tpidrprw_s), |
| offsetoflow32(CPUARMState, cp15.tpidrprw_ns) }, |
| .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| |
| #ifndef CONFIG_USER_ONLY |
| |
| static CPAccessResult gt_cntfrq_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* CNTFRQ: not visible from PL0 if both PL0PCTEN and PL0VCTEN are zero. |
| * Writable only at the highest implemented exception level. |
| */ |
| int el = arm_current_el(env); |
| uint64_t hcr; |
| uint32_t cntkctl; |
| |
| switch (el) { |
| case 0: |
| hcr = arm_hcr_el2_eff(env); |
| if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { |
| cntkctl = env->cp15.cnthctl_el2; |
| } else { |
| cntkctl = env->cp15.c14_cntkctl; |
| } |
| if (!extract32(cntkctl, 0, 2)) { |
| return CP_ACCESS_TRAP; |
| } |
| break; |
| case 1: |
| if (!isread && ri->state == ARM_CP_STATE_AA32 && |
| arm_is_secure_below_el3(env)) { |
| /* Accesses from 32-bit Secure EL1 UNDEF (*not* trap to EL3!) */ |
| return CP_ACCESS_TRAP_UNCATEGORIZED; |
| } |
| break; |
| case 2: |
| case 3: |
| break; |
| } |
| |
| if (!isread && el < arm_highest_el(env)) { |
| return CP_ACCESS_TRAP_UNCATEGORIZED; |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult gt_counter_access(CPUARMState *env, int timeridx, |
| bool isread) |
| { |
| unsigned int cur_el = arm_current_el(env); |
| bool has_el2 = arm_is_el2_enabled(env); |
| uint64_t hcr = arm_hcr_el2_eff(env); |
| |
| switch (cur_el) { |
| case 0: |
| /* If HCR_EL2.<E2H,TGE> == '11': check CNTHCTL_EL2.EL0[PV]CTEN. */ |
| if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { |
| return (extract32(env->cp15.cnthctl_el2, timeridx, 1) |
| ? CP_ACCESS_OK : CP_ACCESS_TRAP_EL2); |
| } |
| |
| /* CNT[PV]CT: not visible from PL0 if EL0[PV]CTEN is zero */ |
| if (!extract32(env->cp15.c14_cntkctl, timeridx, 1)) { |
| return CP_ACCESS_TRAP; |
| } |
| |
| /* If HCR_EL2.<E2H,TGE> == '10': check CNTHCTL_EL2.EL1PCTEN. */ |
| if (hcr & HCR_E2H) { |
| if (timeridx == GTIMER_PHYS && |
| !extract32(env->cp15.cnthctl_el2, 10, 1)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } else { |
| /* If HCR_EL2.<E2H> == 0: check CNTHCTL_EL2.EL1PCEN. */ |
| if (has_el2 && timeridx == GTIMER_PHYS && |
| !extract32(env->cp15.cnthctl_el2, 1, 1)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } |
| break; |
| |
| case 1: |
| /* Check CNTHCTL_EL2.EL1PCTEN, which changes location based on E2H. */ |
| if (has_el2 && timeridx == GTIMER_PHYS && |
| (hcr & HCR_E2H |
| ? !extract32(env->cp15.cnthctl_el2, 10, 1) |
| : !extract32(env->cp15.cnthctl_el2, 0, 1))) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| break; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult gt_timer_access(CPUARMState *env, int timeridx, |
| bool isread) |
| { |
| unsigned int cur_el = arm_current_el(env); |
| bool has_el2 = arm_is_el2_enabled(env); |
| uint64_t hcr = arm_hcr_el2_eff(env); |
| |
| switch (cur_el) { |
| case 0: |
| if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { |
| /* If HCR_EL2.<E2H,TGE> == '11': check CNTHCTL_EL2.EL0[PV]TEN. */ |
| return (extract32(env->cp15.cnthctl_el2, 9 - timeridx, 1) |
| ? CP_ACCESS_OK : CP_ACCESS_TRAP_EL2); |
| } |
| |
| /* |
| * CNT[PV]_CVAL, CNT[PV]_CTL, CNT[PV]_TVAL: not visible from |
| * EL0 if EL0[PV]TEN is zero. |
| */ |
| if (!extract32(env->cp15.c14_cntkctl, 9 - timeridx, 1)) { |
| return CP_ACCESS_TRAP; |
| } |
| /* fall through */ |
| |
| case 1: |
| if (has_el2 && timeridx == GTIMER_PHYS) { |
| if (hcr & HCR_E2H) { |
| /* If HCR_EL2.<E2H,TGE> == '10': check CNTHCTL_EL2.EL1PTEN. */ |
| if (!extract32(env->cp15.cnthctl_el2, 11, 1)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } else { |
| /* If HCR_EL2.<E2H> == 0: check CNTHCTL_EL2.EL1PCEN. */ |
| if (!extract32(env->cp15.cnthctl_el2, 1, 1)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } |
| } |
| break; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult gt_pct_access(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| return gt_counter_access(env, GTIMER_PHYS, isread); |
| } |
| |
| static CPAccessResult gt_vct_access(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| return gt_counter_access(env, GTIMER_VIRT, isread); |
| } |
| |
| static CPAccessResult gt_ptimer_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| return gt_timer_access(env, GTIMER_PHYS, isread); |
| } |
| |
| static CPAccessResult gt_vtimer_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| return gt_timer_access(env, GTIMER_VIRT, isread); |
| } |
| |
| static CPAccessResult gt_stimer_access(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* The AArch64 register view of the secure physical timer is |
| * always accessible from EL3, and configurably accessible from |
| * Secure EL1. |
| */ |
| switch (arm_current_el(env)) { |
| case 1: |
| if (!arm_is_secure(env)) { |
| return CP_ACCESS_TRAP; |
| } |
| if (!(env->cp15.scr_el3 & SCR_ST)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_OK; |
| case 0: |
| case 2: |
| return CP_ACCESS_TRAP; |
| case 3: |
| return CP_ACCESS_OK; |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| static uint64_t gt_get_countervalue(CPUARMState *env) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| return qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) / gt_cntfrq_period_ns(cpu); |
| } |
| |
| static void gt_recalc_timer(ARMCPU *cpu, int timeridx) |
| { |
| ARMGenericTimer *gt = &cpu->env.cp15.c14_timer[timeridx]; |
| |
| if (gt->ctl & 1) { |
| /* Timer enabled: calculate and set current ISTATUS, irq, and |
| * reset timer to when ISTATUS next has to change |
| */ |
| uint64_t offset = timeridx == GTIMER_VIRT ? |
| cpu->env.cp15.cntvoff_el2 : 0; |
| uint64_t count = gt_get_countervalue(&cpu->env); |
| /* Note that this must be unsigned 64 bit arithmetic: */ |
| int istatus = count - offset >= gt->cval; |
| uint64_t nexttick; |
| int irqstate; |
| |
| gt->ctl = deposit32(gt->ctl, 2, 1, istatus); |
| |
| irqstate = (istatus && !(gt->ctl & 2)); |
| qemu_set_irq(cpu->gt_timer_outputs[timeridx], irqstate); |
| |
| if (istatus) { |
| /* Next transition is when count rolls back over to zero */ |
| nexttick = UINT64_MAX; |
| } else { |
| /* Next transition is when we hit cval */ |
| nexttick = gt->cval + offset; |
| } |
| /* Note that the desired next expiry time might be beyond the |
| * signed-64-bit range of a QEMUTimer -- in this case we just |
| * set the timer for as far in the future as possible. When the |
| * timer expires we will reset the timer for any remaining period. |
| */ |
| if (nexttick > INT64_MAX / gt_cntfrq_period_ns(cpu)) { |
| timer_mod_ns(cpu->gt_timer[timeridx], INT64_MAX); |
| } else { |
| timer_mod(cpu->gt_timer[timeridx], nexttick); |
| } |
| trace_arm_gt_recalc(timeridx, irqstate, nexttick); |
| } else { |
| /* Timer disabled: ISTATUS and timer output always clear */ |
| gt->ctl &= ~4; |
| qemu_set_irq(cpu->gt_timer_outputs[timeridx], 0); |
| timer_del(cpu->gt_timer[timeridx]); |
| trace_arm_gt_recalc_disabled(timeridx); |
| } |
| } |
| |
| static void gt_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri, |
| int timeridx) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| timer_del(cpu->gt_timer[timeridx]); |
| } |
| |
| static uint64_t gt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return gt_get_countervalue(env); |
| } |
| |
| static uint64_t gt_virt_cnt_offset(CPUARMState *env) |
| { |
| uint64_t hcr; |
| |
| switch (arm_current_el(env)) { |
| case 2: |
| hcr = arm_hcr_el2_eff(env); |
| if (hcr & HCR_E2H) { |
| return 0; |
| } |
| break; |
| case 0: |
| hcr = arm_hcr_el2_eff(env); |
| if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { |
| return 0; |
| } |
| break; |
| } |
| |
| return env->cp15.cntvoff_el2; |
| } |
| |
| static uint64_t gt_virt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return gt_get_countervalue(env) - gt_virt_cnt_offset(env); |
| } |
| |
| static void gt_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| int timeridx, |
| uint64_t value) |
| { |
| trace_arm_gt_cval_write(timeridx, value); |
| env->cp15.c14_timer[timeridx].cval = value; |
| gt_recalc_timer(env_archcpu(env), timeridx); |
| } |
| |
| static uint64_t gt_tval_read(CPUARMState *env, const ARMCPRegInfo *ri, |
| int timeridx) |
| { |
| uint64_t offset = 0; |
| |
| switch (timeridx) { |
| case GTIMER_VIRT: |
| case GTIMER_HYPVIRT: |
| offset = gt_virt_cnt_offset(env); |
| break; |
| } |
| |
| return (uint32_t)(env->cp15.c14_timer[timeridx].cval - |
| (gt_get_countervalue(env) - offset)); |
| } |
| |
| static void gt_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| int timeridx, |
| uint64_t value) |
| { |
| uint64_t offset = 0; |
| |
| switch (timeridx) { |
| case GTIMER_VIRT: |
| case GTIMER_HYPVIRT: |
| offset = gt_virt_cnt_offset(env); |
| break; |
| } |
| |
| trace_arm_gt_tval_write(timeridx, value); |
| env->cp15.c14_timer[timeridx].cval = gt_get_countervalue(env) - offset + |
| sextract64(value, 0, 32); |
| gt_recalc_timer(env_archcpu(env), timeridx); |
| } |
| |
| static void gt_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| int timeridx, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| uint32_t oldval = env->cp15.c14_timer[timeridx].ctl; |
| |
| trace_arm_gt_ctl_write(timeridx, value); |
| env->cp15.c14_timer[timeridx].ctl = deposit64(oldval, 0, 2, value); |
| if ((oldval ^ value) & 1) { |
| /* Enable toggled */ |
| gt_recalc_timer(cpu, timeridx); |
| } else if ((oldval ^ value) & 2) { |
| /* IMASK toggled: don't need to recalculate, |
| * just set the interrupt line based on ISTATUS |
| */ |
| int irqstate = (oldval & 4) && !(value & 2); |
| |
| trace_arm_gt_imask_toggle(timeridx, irqstate); |
| qemu_set_irq(cpu->gt_timer_outputs[timeridx], irqstate); |
| } |
| } |
| |
| static void gt_phys_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| gt_timer_reset(env, ri, GTIMER_PHYS); |
| } |
| |
| static void gt_phys_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_cval_write(env, ri, GTIMER_PHYS, value); |
| } |
| |
| static uint64_t gt_phys_tval_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return gt_tval_read(env, ri, GTIMER_PHYS); |
| } |
| |
| static void gt_phys_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_tval_write(env, ri, GTIMER_PHYS, value); |
| } |
| |
| static void gt_phys_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_ctl_write(env, ri, GTIMER_PHYS, value); |
| } |
| |
| static int gt_phys_redir_timeridx(CPUARMState *env) |
| { |
| switch (arm_mmu_idx(env)) { |
| case ARMMMUIdx_E20_0: |
| case ARMMMUIdx_E20_2: |
| case ARMMMUIdx_E20_2_PAN: |
| case ARMMMUIdx_SE20_0: |
| case ARMMMUIdx_SE20_2: |
| case ARMMMUIdx_SE20_2_PAN: |
| return GTIMER_HYP; |
| default: |
| return GTIMER_PHYS; |
| } |
| } |
| |
| static int gt_virt_redir_timeridx(CPUARMState *env) |
| { |
| switch (arm_mmu_idx(env)) { |
| case ARMMMUIdx_E20_0: |
| case ARMMMUIdx_E20_2: |
| case ARMMMUIdx_E20_2_PAN: |
| case ARMMMUIdx_SE20_0: |
| case ARMMMUIdx_SE20_2: |
| case ARMMMUIdx_SE20_2_PAN: |
| return GTIMER_HYPVIRT; |
| default: |
| return GTIMER_VIRT; |
| } |
| } |
| |
| static uint64_t gt_phys_redir_cval_read(CPUARMState *env, |
| const ARMCPRegInfo *ri) |
| { |
| int timeridx = gt_phys_redir_timeridx(env); |
| return env->cp15.c14_timer[timeridx].cval; |
| } |
| |
| static void gt_phys_redir_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| int timeridx = gt_phys_redir_timeridx(env); |
| gt_cval_write(env, ri, timeridx, value); |
| } |
| |
| static uint64_t gt_phys_redir_tval_read(CPUARMState *env, |
| const ARMCPRegInfo *ri) |
| { |
| int timeridx = gt_phys_redir_timeridx(env); |
| return gt_tval_read(env, ri, timeridx); |
| } |
| |
| static void gt_phys_redir_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| int timeridx = gt_phys_redir_timeridx(env); |
| gt_tval_write(env, ri, timeridx, value); |
| } |
| |
| static uint64_t gt_phys_redir_ctl_read(CPUARMState *env, |
| const ARMCPRegInfo *ri) |
| { |
| int timeridx = gt_phys_redir_timeridx(env); |
| return env->cp15.c14_timer[timeridx].ctl; |
| } |
| |
| static void gt_phys_redir_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| int timeridx = gt_phys_redir_timeridx(env); |
| gt_ctl_write(env, ri, timeridx, value); |
| } |
| |
| static void gt_virt_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| gt_timer_reset(env, ri, GTIMER_VIRT); |
| } |
| |
| static void gt_virt_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_cval_write(env, ri, GTIMER_VIRT, value); |
| } |
| |
| static uint64_t gt_virt_tval_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return gt_tval_read(env, ri, GTIMER_VIRT); |
| } |
| |
| static void gt_virt_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_tval_write(env, ri, GTIMER_VIRT, value); |
| } |
| |
| static void gt_virt_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_ctl_write(env, ri, GTIMER_VIRT, value); |
| } |
| |
| static void gt_cntvoff_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| trace_arm_gt_cntvoff_write(value); |
| raw_write(env, ri, value); |
| gt_recalc_timer(cpu, GTIMER_VIRT); |
| } |
| |
| static uint64_t gt_virt_redir_cval_read(CPUARMState *env, |
| const ARMCPRegInfo *ri) |
| { |
| int timeridx = gt_virt_redir_timeridx(env); |
| return env->cp15.c14_timer[timeridx].cval; |
| } |
| |
| static void gt_virt_redir_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| int timeridx = gt_virt_redir_timeridx(env); |
| gt_cval_write(env, ri, timeridx, value); |
| } |
| |
| static uint64_t gt_virt_redir_tval_read(CPUARMState *env, |
| const ARMCPRegInfo *ri) |
| { |
| int timeridx = gt_virt_redir_timeridx(env); |
| return gt_tval_read(env, ri, timeridx); |
| } |
| |
| static void gt_virt_redir_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| int timeridx = gt_virt_redir_timeridx(env); |
| gt_tval_write(env, ri, timeridx, value); |
| } |
| |
| static uint64_t gt_virt_redir_ctl_read(CPUARMState *env, |
| const ARMCPRegInfo *ri) |
| { |
| int timeridx = gt_virt_redir_timeridx(env); |
| return env->cp15.c14_timer[timeridx].ctl; |
| } |
| |
| static void gt_virt_redir_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| int timeridx = gt_virt_redir_timeridx(env); |
| gt_ctl_write(env, ri, timeridx, value); |
| } |
| |
| static void gt_hyp_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| gt_timer_reset(env, ri, GTIMER_HYP); |
| } |
| |
| static void gt_hyp_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_cval_write(env, ri, GTIMER_HYP, value); |
| } |
| |
| static uint64_t gt_hyp_tval_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return gt_tval_read(env, ri, GTIMER_HYP); |
| } |
| |
| static void gt_hyp_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_tval_write(env, ri, GTIMER_HYP, value); |
| } |
| |
| static void gt_hyp_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_ctl_write(env, ri, GTIMER_HYP, value); |
| } |
| |
| static void gt_sec_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| gt_timer_reset(env, ri, GTIMER_SEC); |
| } |
| |
| static void gt_sec_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_cval_write(env, ri, GTIMER_SEC, value); |
| } |
| |
| static uint64_t gt_sec_tval_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return gt_tval_read(env, ri, GTIMER_SEC); |
| } |
| |
| static void gt_sec_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_tval_write(env, ri, GTIMER_SEC, value); |
| } |
| |
| static void gt_sec_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_ctl_write(env, ri, GTIMER_SEC, value); |
| } |
| |
| static void gt_hv_timer_reset(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| gt_timer_reset(env, ri, GTIMER_HYPVIRT); |
| } |
| |
| static void gt_hv_cval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_cval_write(env, ri, GTIMER_HYPVIRT, value); |
| } |
| |
| static uint64_t gt_hv_tval_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return gt_tval_read(env, ri, GTIMER_HYPVIRT); |
| } |
| |
| static void gt_hv_tval_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_tval_write(env, ri, GTIMER_HYPVIRT, value); |
| } |
| |
| static void gt_hv_ctl_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| gt_ctl_write(env, ri, GTIMER_HYPVIRT, value); |
| } |
| |
| void arm_gt_ptimer_cb(void *opaque) |
| { |
| ARMCPU *cpu = opaque; |
| |
| gt_recalc_timer(cpu, GTIMER_PHYS); |
| } |
| |
| void arm_gt_vtimer_cb(void *opaque) |
| { |
| ARMCPU *cpu = opaque; |
| |
| gt_recalc_timer(cpu, GTIMER_VIRT); |
| } |
| |
| void arm_gt_htimer_cb(void *opaque) |
| { |
| ARMCPU *cpu = opaque; |
| |
| gt_recalc_timer(cpu, GTIMER_HYP); |
| } |
| |
| void arm_gt_stimer_cb(void *opaque) |
| { |
| ARMCPU *cpu = opaque; |
| |
| gt_recalc_timer(cpu, GTIMER_SEC); |
| } |
| |
| void arm_gt_hvtimer_cb(void *opaque) |
| { |
| ARMCPU *cpu = opaque; |
| |
| gt_recalc_timer(cpu, GTIMER_HYPVIRT); |
| } |
| |
| static void arm_gt_cntfrq_reset(CPUARMState *env, const ARMCPRegInfo *opaque) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| cpu->env.cp15.c14_cntfrq = cpu->gt_cntfrq_hz; |
| } |
| |
| static const ARMCPRegInfo generic_timer_cp_reginfo[] = { |
| /* Note that CNTFRQ is purely reads-as-written for the benefit |
| * of software; writing it doesn't actually change the timer frequency. |
| * Our reset value matches the fixed frequency we implement the timer at. |
| */ |
| { .name = "CNTFRQ", .cp = 15, .crn = 14, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .type = ARM_CP_ALIAS, |
| .access = PL1_RW | PL0_R, .accessfn = gt_cntfrq_access, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.c14_cntfrq), |
| }, |
| { .name = "CNTFRQ_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 0, |
| .access = PL1_RW | PL0_R, .accessfn = gt_cntfrq_access, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_cntfrq), |
| .resetfn = arm_gt_cntfrq_reset, |
| }, |
| /* overall control: mostly access permissions */ |
| { .name = "CNTKCTL", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 14, .crm = 1, .opc2 = 0, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_cntkctl), |
| .resetvalue = 0, |
| }, |
| /* per-timer control */ |
| { .name = "CNTP_CTL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 1, |
| .secure = ARM_CP_SECSTATE_NS, |
| .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL0_RW, |
| .accessfn = gt_ptimer_access, |
| .fieldoffset = offsetoflow32(CPUARMState, |
| cp15.c14_timer[GTIMER_PHYS].ctl), |
| .readfn = gt_phys_redir_ctl_read, .raw_readfn = raw_read, |
| .writefn = gt_phys_redir_ctl_write, .raw_writefn = raw_write, |
| }, |
| { .name = "CNTP_CTL_S", |
| .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 1, |
| .secure = ARM_CP_SECSTATE_S, |
| .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL0_RW, |
| .accessfn = gt_ptimer_access, |
| .fieldoffset = offsetoflow32(CPUARMState, |
| cp15.c14_timer[GTIMER_SEC].ctl), |
| .writefn = gt_sec_ctl_write, .raw_writefn = raw_write, |
| }, |
| { .name = "CNTP_CTL_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 2, .opc2 = 1, |
| .type = ARM_CP_IO, .access = PL0_RW, |
| .accessfn = gt_ptimer_access, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].ctl), |
| .resetvalue = 0, |
| .readfn = gt_phys_redir_ctl_read, .raw_readfn = raw_read, |
| .writefn = gt_phys_redir_ctl_write, .raw_writefn = raw_write, |
| }, |
| { .name = "CNTV_CTL", .cp = 15, .crn = 14, .crm = 3, .opc1 = 0, .opc2 = 1, |
| .type = ARM_CP_IO | ARM_CP_ALIAS, .access = PL0_RW, |
| .accessfn = gt_vtimer_access, |
| .fieldoffset = offsetoflow32(CPUARMState, |
| cp15.c14_timer[GTIMER_VIRT].ctl), |
| .readfn = gt_virt_redir_ctl_read, .raw_readfn = raw_read, |
| .writefn = gt_virt_redir_ctl_write, .raw_writefn = raw_write, |
| }, |
| { .name = "CNTV_CTL_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 3, .opc2 = 1, |
| .type = ARM_CP_IO, .access = PL0_RW, |
| .accessfn = gt_vtimer_access, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].ctl), |
| .resetvalue = 0, |
| .readfn = gt_virt_redir_ctl_read, .raw_readfn = raw_read, |
| .writefn = gt_virt_redir_ctl_write, .raw_writefn = raw_write, |
| }, |
| /* TimerValue views: a 32 bit downcounting view of the underlying state */ |
| { .name = "CNTP_TVAL", .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 0, |
| .secure = ARM_CP_SECSTATE_NS, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW, |
| .accessfn = gt_ptimer_access, |
| .readfn = gt_phys_redir_tval_read, .writefn = gt_phys_redir_tval_write, |
| }, |
| { .name = "CNTP_TVAL_S", |
| .cp = 15, .crn = 14, .crm = 2, .opc1 = 0, .opc2 = 0, |
| .secure = ARM_CP_SECSTATE_S, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW, |
| .accessfn = gt_ptimer_access, |
| .readfn = gt_sec_tval_read, .writefn = gt_sec_tval_write, |
| }, |
| { .name = "CNTP_TVAL_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 2, .opc2 = 0, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW, |
| .accessfn = gt_ptimer_access, .resetfn = gt_phys_timer_reset, |
| .readfn = gt_phys_redir_tval_read, .writefn = gt_phys_redir_tval_write, |
| }, |
| { .name = "CNTV_TVAL", .cp = 15, .crn = 14, .crm = 3, .opc1 = 0, .opc2 = 0, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW, |
| .accessfn = gt_vtimer_access, |
| .readfn = gt_virt_redir_tval_read, .writefn = gt_virt_redir_tval_write, |
| }, |
| { .name = "CNTV_TVAL_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 3, .opc2 = 0, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL0_RW, |
| .accessfn = gt_vtimer_access, .resetfn = gt_virt_timer_reset, |
| .readfn = gt_virt_redir_tval_read, .writefn = gt_virt_redir_tval_write, |
| }, |
| /* The counter itself */ |
| { .name = "CNTPCT", .cp = 15, .crm = 14, .opc1 = 0, |
| .access = PL0_R, .type = ARM_CP_64BIT | ARM_CP_NO_RAW | ARM_CP_IO, |
| .accessfn = gt_pct_access, |
| .readfn = gt_cnt_read, .resetfn = arm_cp_reset_ignore, |
| }, |
| { .name = "CNTPCT_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 1, |
| .access = PL0_R, .type = ARM_CP_NO_RAW | ARM_CP_IO, |
| .accessfn = gt_pct_access, .readfn = gt_cnt_read, |
| }, |
| { .name = "CNTVCT", .cp = 15, .crm = 14, .opc1 = 1, |
| .access = PL0_R, .type = ARM_CP_64BIT | ARM_CP_NO_RAW | ARM_CP_IO, |
| .accessfn = gt_vct_access, |
| .readfn = gt_virt_cnt_read, .resetfn = arm_cp_reset_ignore, |
| }, |
| { .name = "CNTVCT_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 2, |
| .access = PL0_R, .type = ARM_CP_NO_RAW | ARM_CP_IO, |
| .accessfn = gt_vct_access, .readfn = gt_virt_cnt_read, |
| }, |
| /* Comparison value, indicating when the timer goes off */ |
| { .name = "CNTP_CVAL", .cp = 15, .crm = 14, .opc1 = 2, |
| .secure = ARM_CP_SECSTATE_NS, |
| .access = PL0_RW, |
| .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval), |
| .accessfn = gt_ptimer_access, |
| .readfn = gt_phys_redir_cval_read, .raw_readfn = raw_read, |
| .writefn = gt_phys_redir_cval_write, .raw_writefn = raw_write, |
| }, |
| { .name = "CNTP_CVAL_S", .cp = 15, .crm = 14, .opc1 = 2, |
| .secure = ARM_CP_SECSTATE_S, |
| .access = PL0_RW, |
| .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_SEC].cval), |
| .accessfn = gt_ptimer_access, |
| .writefn = gt_sec_cval_write, .raw_writefn = raw_write, |
| }, |
| { .name = "CNTP_CVAL_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 2, .opc2 = 2, |
| .access = PL0_RW, |
| .type = ARM_CP_IO, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval), |
| .resetvalue = 0, .accessfn = gt_ptimer_access, |
| .readfn = gt_phys_redir_cval_read, .raw_readfn = raw_read, |
| .writefn = gt_phys_redir_cval_write, .raw_writefn = raw_write, |
| }, |
| { .name = "CNTV_CVAL", .cp = 15, .crm = 14, .opc1 = 3, |
| .access = PL0_RW, |
| .type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval), |
| .accessfn = gt_vtimer_access, |
| .readfn = gt_virt_redir_cval_read, .raw_readfn = raw_read, |
| .writefn = gt_virt_redir_cval_write, .raw_writefn = raw_write, |
| }, |
| { .name = "CNTV_CVAL_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 3, .opc2 = 2, |
| .access = PL0_RW, |
| .type = ARM_CP_IO, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval), |
| .resetvalue = 0, .accessfn = gt_vtimer_access, |
| .readfn = gt_virt_redir_cval_read, .raw_readfn = raw_read, |
| .writefn = gt_virt_redir_cval_write, .raw_writefn = raw_write, |
| }, |
| /* Secure timer -- this is actually restricted to only EL3 |
| * and configurably Secure-EL1 via the accessfn. |
| */ |
| { .name = "CNTPS_TVAL_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 7, .crn = 14, .crm = 2, .opc2 = 0, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL1_RW, |
| .accessfn = gt_stimer_access, |
| .readfn = gt_sec_tval_read, |
| .writefn = gt_sec_tval_write, |
| .resetfn = gt_sec_timer_reset, |
| }, |
| { .name = "CNTPS_CTL_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 7, .crn = 14, .crm = 2, .opc2 = 1, |
| .type = ARM_CP_IO, .access = PL1_RW, |
| .accessfn = gt_stimer_access, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_SEC].ctl), |
| .resetvalue = 0, |
| .writefn = gt_sec_ctl_write, .raw_writefn = raw_write, |
| }, |
| { .name = "CNTPS_CVAL_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 7, .crn = 14, .crm = 2, .opc2 = 2, |
| .type = ARM_CP_IO, .access = PL1_RW, |
| .accessfn = gt_stimer_access, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_SEC].cval), |
| .writefn = gt_sec_cval_write, .raw_writefn = raw_write, |
| }, |
| REGINFO_SENTINEL |
| }; |
| |
| static CPAccessResult e2h_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (!(arm_hcr_el2_eff(env) & HCR_E2H)) { |
| return CP_ACCESS_TRAP; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| #else |
| |
| /* In user-mode most of the generic timer registers are inaccessible |
| * however modern kernels (4.12+) allow access to cntvct_el0 |
| */ |
| |
| static uint64_t gt_virt_cnt_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| /* Currently we have no support for QEMUTimer in linux-user so we |
| * can't call gt_get_countervalue(env), instead we directly |
| * call the lower level functions. |
| */ |
| return cpu_get_clock() / gt_cntfrq_period_ns(cpu); |
| } |
| |
| static const ARMCPRegInfo generic_timer_cp_reginfo[] = { |
| { .name = "CNTFRQ_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 0, |
| .type = ARM_CP_CONST, .access = PL0_R /* no PL1_RW in linux-user */, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_cntfrq), |
| .resetvalue = NANOSECONDS_PER_SECOND / GTIMER_SCALE, |
| }, |
| { .name = "CNTVCT_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 0, .opc2 = 2, |
| .access = PL0_R, .type = ARM_CP_NO_RAW | ARM_CP_IO, |
| .readfn = gt_virt_cnt_read, |
| }, |
| REGINFO_SENTINEL |
| }; |
| |
| #endif |
| |
| static void par_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) |
| { |
| if (arm_feature(env, ARM_FEATURE_LPAE)) { |
| raw_write(env, ri, value); |
| } else if (arm_feature(env, ARM_FEATURE_V7)) { |
| raw_write(env, ri, value & 0xfffff6ff); |
| } else { |
| raw_write(env, ri, value & 0xfffff1ff); |
| } |
| } |
| |
| #ifndef CONFIG_USER_ONLY |
| /* get_phys_addr() isn't present for user-mode-only targets */ |
| |
| static CPAccessResult ats_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (ri->opc2 & 4) { |
| /* The ATS12NSO* operations must trap to EL3 or EL2 if executed in |
| * Secure EL1 (which can only happen if EL3 is AArch64). |
| * They are simply UNDEF if executed from NS EL1. |
| * They function normally from EL2 or EL3. |
| */ |
| if (arm_current_el(env) == 1) { |
| if (arm_is_secure_below_el3(env)) { |
| if (env->cp15.scr_el3 & SCR_EEL2) { |
| return CP_ACCESS_TRAP_UNCATEGORIZED_EL2; |
| } |
| return CP_ACCESS_TRAP_UNCATEGORIZED_EL3; |
| } |
| return CP_ACCESS_TRAP_UNCATEGORIZED; |
| } |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| #ifdef CONFIG_TCG |
| static uint64_t do_ats_write(CPUARMState *env, uint64_t value, |
| MMUAccessType access_type, ARMMMUIdx mmu_idx) |
| { |
| hwaddr phys_addr; |
| target_ulong page_size; |
| int prot; |
| bool ret; |
| uint64_t par64; |
| bool format64 = false; |
| MemTxAttrs attrs = {}; |
| ARMMMUFaultInfo fi = {}; |
| ARMCacheAttrs cacheattrs = {}; |
| |
| ret = get_phys_addr(env, value, access_type, mmu_idx, &phys_addr, &attrs, |
| &prot, &page_size, &fi, &cacheattrs); |
| |
| if (ret) { |
| /* |
| * Some kinds of translation fault must cause exceptions rather |
| * than being reported in the PAR. |
| */ |
| int current_el = arm_current_el(env); |
| int target_el; |
| uint32_t syn, fsr, fsc; |
| bool take_exc = false; |
| |
| if (fi.s1ptw && current_el == 1 |
| && arm_mmu_idx_is_stage1_of_2(mmu_idx)) { |
| /* |
| * Synchronous stage 2 fault on an access made as part of the |
| * translation table walk for AT S1E0* or AT S1E1* insn |
| * executed from NS EL1. If this is a synchronous external abort |
| * and SCR_EL3.EA == 1, then we take a synchronous external abort |
| * to EL3. Otherwise the fault is taken as an exception to EL2, |
| * and HPFAR_EL2 holds the faulting IPA. |
| */ |
| if (fi.type == ARMFault_SyncExternalOnWalk && |
| (env->cp15.scr_el3 & SCR_EA)) { |
| target_el = 3; |
| } else { |
| env->cp15.hpfar_el2 = extract64(fi.s2addr, 12, 47) << 4; |
| if (arm_is_secure_below_el3(env) && fi.s1ns) { |
| env->cp15.hpfar_el2 |= HPFAR_NS; |
| } |
| target_el = 2; |
| } |
| take_exc = true; |
| } else if (fi.type == ARMFault_SyncExternalOnWalk) { |
| /* |
| * Synchronous external aborts during a translation table walk |
| * are taken as Data Abort exceptions. |
| */ |
| if (fi.stage2) { |
| if (current_el == 3) { |
| target_el = 3; |
| } else { |
| target_el = 2; |
| } |
| } else { |
| target_el = exception_target_el(env); |
| } |
| take_exc = true; |
| } |
| |
| if (take_exc) { |
| /* Construct FSR and FSC using same logic as arm_deliver_fault() */ |
| if (target_el == 2 || arm_el_is_aa64(env, target_el) || |
| arm_s1_regime_using_lpae_format(env, mmu_idx)) { |
| fsr = arm_fi_to_lfsc(&fi); |
| fsc = extract32(fsr, 0, 6); |
| } else { |
| fsr = arm_fi_to_sfsc(&fi); |
| fsc = 0x3f; |
| } |
| /* |
| * Report exception with ESR indicating a fault due to a |
| * translation table walk for a cache maintenance instruction. |
| */ |
| syn = syn_data_abort_no_iss(current_el == target_el, 0, |
| fi.ea, 1, fi.s1ptw, 1, fsc); |
| env->exception.vaddress = value; |
| env->exception.fsr = fsr; |
| raise_exception(env, EXCP_DATA_ABORT, syn, target_el); |
| } |
| } |
| |
| if (is_a64(env)) { |
| format64 = true; |
| } else if (arm_feature(env, ARM_FEATURE_LPAE)) { |
| /* |
| * ATS1Cxx: |
| * * TTBCR.EAE determines whether the result is returned using the |
| * 32-bit or the 64-bit PAR format |
| * * Instructions executed in Hyp mode always use the 64bit format |
| * |
| * ATS1S2NSOxx uses the 64bit format if any of the following is true: |
| * * The Non-secure TTBCR.EAE bit is set to 1 |
| * * The implementation includes EL2, and the value of HCR.VM is 1 |
| * |
| * (Note that HCR.DC makes HCR.VM behave as if it is 1.) |
| * |
| * ATS1Hx always uses the 64bit format. |
| */ |
| format64 = arm_s1_regime_using_lpae_format(env, mmu_idx); |
| |
| if (arm_feature(env, ARM_FEATURE_EL2)) { |
| if (mmu_idx == ARMMMUIdx_E10_0 || |
| mmu_idx == ARMMMUIdx_E10_1 || |
| mmu_idx == ARMMMUIdx_E10_1_PAN) { |
| format64 |= env->cp15.hcr_el2 & (HCR_VM | HCR_DC); |
| } else { |
| format64 |= arm_current_el(env) == 2; |
| } |
| } |
| } |
| |
| if (format64) { |
| /* Create a 64-bit PAR */ |
| par64 = (1 << 11); /* LPAE bit always set */ |
| if (!ret) { |
| par64 |= phys_addr & ~0xfffULL; |
| if (!attrs.secure) { |
| par64 |= (1 << 9); /* NS */ |
| } |
| par64 |= (uint64_t)cacheattrs.attrs << 56; /* ATTR */ |
| par64 |= cacheattrs.shareability << 7; /* SH */ |
| } else { |
| uint32_t fsr = arm_fi_to_lfsc(&fi); |
| |
| par64 |= 1; /* F */ |
| par64 |= (fsr & 0x3f) << 1; /* FS */ |
| if (fi.stage2) { |
| par64 |= (1 << 9); /* S */ |
| } |
| if (fi.s1ptw) { |
| par64 |= (1 << 8); /* PTW */ |
| } |
| } |
| } else { |
| /* fsr is a DFSR/IFSR value for the short descriptor |
| * translation table format (with WnR always clear). |
| * Convert it to a 32-bit PAR. |
| */ |
| if (!ret) { |
| /* We do not set any attribute bits in the PAR */ |
| if (page_size == (1 << 24) |
| && arm_feature(env, ARM_FEATURE_V7)) { |
| par64 = (phys_addr & 0xff000000) | (1 << 1); |
| } else { |
| par64 = phys_addr & 0xfffff000; |
| } |
| if (!attrs.secure) { |
| par64 |= (1 << 9); /* NS */ |
| } |
| } else { |
| uint32_t fsr = arm_fi_to_sfsc(&fi); |
| |
| par64 = ((fsr & (1 << 10)) >> 5) | ((fsr & (1 << 12)) >> 6) | |
| ((fsr & 0xf) << 1) | 1; |
| } |
| } |
| return par64; |
| } |
| #endif /* CONFIG_TCG */ |
| |
| static void ats_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) |
| { |
| #ifdef CONFIG_TCG |
| MMUAccessType access_type = ri->opc2 & 1 ? MMU_DATA_STORE : MMU_DATA_LOAD; |
| uint64_t par64; |
| ARMMMUIdx mmu_idx; |
| int el = arm_current_el(env); |
| bool secure = arm_is_secure_below_el3(env); |
| |
| switch (ri->opc2 & 6) { |
| case 0: |
| /* stage 1 current state PL1: ATS1CPR, ATS1CPW, ATS1CPRP, ATS1CPWP */ |
| switch (el) { |
| case 3: |
| mmu_idx = ARMMMUIdx_SE3; |
| break; |
| case 2: |
| g_assert(!secure); /* ARMv8.4-SecEL2 is 64-bit only */ |
| /* fall through */ |
| case 1: |
| if (ri->crm == 9 && (env->uncached_cpsr & CPSR_PAN)) { |
| mmu_idx = (secure ? ARMMMUIdx_Stage1_SE1_PAN |
| : ARMMMUIdx_Stage1_E1_PAN); |
| } else { |
| mmu_idx = secure ? ARMMMUIdx_Stage1_SE1 : ARMMMUIdx_Stage1_E1; |
| } |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| break; |
| case 2: |
| /* stage 1 current state PL0: ATS1CUR, ATS1CUW */ |
| switch (el) { |
| case 3: |
| mmu_idx = ARMMMUIdx_SE10_0; |
| break; |
| case 2: |
| g_assert(!secure); /* ARMv8.4-SecEL2 is 64-bit only */ |
| mmu_idx = ARMMMUIdx_Stage1_E0; |
| break; |
| case 1: |
| mmu_idx = secure ? ARMMMUIdx_Stage1_SE0 : ARMMMUIdx_Stage1_E0; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| break; |
| case 4: |
| /* stage 1+2 NonSecure PL1: ATS12NSOPR, ATS12NSOPW */ |
| mmu_idx = ARMMMUIdx_E10_1; |
| break; |
| case 6: |
| /* stage 1+2 NonSecure PL0: ATS12NSOUR, ATS12NSOUW */ |
| mmu_idx = ARMMMUIdx_E10_0; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| |
| par64 = do_ats_write(env, value, access_type, mmu_idx); |
| |
| A32_BANKED_CURRENT_REG_SET(env, par, par64); |
| #else |
| /* Handled by hardware accelerator. */ |
| g_assert_not_reached(); |
| #endif /* CONFIG_TCG */ |
| } |
| |
| static void ats1h_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| #ifdef CONFIG_TCG |
| MMUAccessType access_type = ri->opc2 & 1 ? MMU_DATA_STORE : MMU_DATA_LOAD; |
| uint64_t par64; |
| |
| par64 = do_ats_write(env, value, access_type, ARMMMUIdx_E2); |
| |
| A32_BANKED_CURRENT_REG_SET(env, par, par64); |
| #else |
| /* Handled by hardware accelerator. */ |
| g_assert_not_reached(); |
| #endif /* CONFIG_TCG */ |
| } |
| |
| static CPAccessResult at_s1e2_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 3 && |
| !(env->cp15.scr_el3 & (SCR_NS | SCR_EEL2))) { |
| return CP_ACCESS_TRAP; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static void ats_write64(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| #ifdef CONFIG_TCG |
| MMUAccessType access_type = ri->opc2 & 1 ? MMU_DATA_STORE : MMU_DATA_LOAD; |
| ARMMMUIdx mmu_idx; |
| int secure = arm_is_secure_below_el3(env); |
| |
| switch (ri->opc2 & 6) { |
| case 0: |
| switch (ri->opc1) { |
| case 0: /* AT S1E1R, AT S1E1W, AT S1E1RP, AT S1E1WP */ |
| if (ri->crm == 9 && (env->pstate & PSTATE_PAN)) { |
| mmu_idx = (secure ? ARMMMUIdx_Stage1_SE1_PAN |
| : ARMMMUIdx_Stage1_E1_PAN); |
| } else { |
| mmu_idx = secure ? ARMMMUIdx_Stage1_SE1 : ARMMMUIdx_Stage1_E1; |
| } |
| break; |
| case 4: /* AT S1E2R, AT S1E2W */ |
| mmu_idx = secure ? ARMMMUIdx_SE2 : ARMMMUIdx_E2; |
| break; |
| case 6: /* AT S1E3R, AT S1E3W */ |
| mmu_idx = ARMMMUIdx_SE3; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| break; |
| case 2: /* AT S1E0R, AT S1E0W */ |
| mmu_idx = secure ? ARMMMUIdx_Stage1_SE0 : ARMMMUIdx_Stage1_E0; |
| break; |
| case 4: /* AT S12E1R, AT S12E1W */ |
| mmu_idx = secure ? ARMMMUIdx_SE10_1 : ARMMMUIdx_E10_1; |
| break; |
| case 6: /* AT S12E0R, AT S12E0W */ |
| mmu_idx = secure ? ARMMMUIdx_SE10_0 : ARMMMUIdx_E10_0; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| |
| env->cp15.par_el[1] = do_ats_write(env, value, access_type, mmu_idx); |
| #else |
| /* Handled by hardware accelerator. */ |
| g_assert_not_reached(); |
| #endif /* CONFIG_TCG */ |
| } |
| #endif |
| |
| static const ARMCPRegInfo vapa_cp_reginfo[] = { |
| { .name = "PAR", .cp = 15, .crn = 7, .crm = 4, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .resetvalue = 0, |
| .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.par_s), |
| offsetoflow32(CPUARMState, cp15.par_ns) }, |
| .writefn = par_write }, |
| #ifndef CONFIG_USER_ONLY |
| /* This underdecoding is safe because the reginfo is NO_RAW. */ |
| { .name = "ATS", .cp = 15, .crn = 7, .crm = 8, .opc1 = 0, .opc2 = CP_ANY, |
| .access = PL1_W, .accessfn = ats_access, |
| .writefn = ats_write, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC }, |
| #endif |
| REGINFO_SENTINEL |
| }; |
| |
| /* Return basic MPU access permission bits. */ |
| static uint32_t simple_mpu_ap_bits(uint32_t val) |
| { |
| uint32_t ret; |
| uint32_t mask; |
| int i; |
| ret = 0; |
| mask = 3; |
| for (i = 0; i < 16; i += 2) { |
| ret |= (val >> i) & mask; |
| mask <<= 2; |
| } |
| return ret; |
| } |
| |
| /* Pad basic MPU access permission bits to extended format. */ |
| static uint32_t extended_mpu_ap_bits(uint32_t val) |
| { |
| uint32_t ret; |
| uint32_t mask; |
| int i; |
| ret = 0; |
| mask = 3; |
| for (i = 0; i < 16; i += 2) { |
| ret |= (val & mask) << i; |
| mask <<= 2; |
| } |
| return ret; |
| } |
| |
| static void pmsav5_data_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->cp15.pmsav5_data_ap = extended_mpu_ap_bits(value); |
| } |
| |
| static uint64_t pmsav5_data_ap_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return simple_mpu_ap_bits(env->cp15.pmsav5_data_ap); |
| } |
| |
| static void pmsav5_insn_ap_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->cp15.pmsav5_insn_ap = extended_mpu_ap_bits(value); |
| } |
| |
| static uint64_t pmsav5_insn_ap_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return simple_mpu_ap_bits(env->cp15.pmsav5_insn_ap); |
| } |
| |
| static uint64_t pmsav7_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| uint32_t *u32p = *(uint32_t **)raw_ptr(env, ri); |
| |
| if (!u32p) { |
| return 0; |
| } |
| |
| u32p += env->pmsav7.rnr[M_REG_NS]; |
| return *u32p; |
| } |
| |
| static void pmsav7_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| uint32_t *u32p = *(uint32_t **)raw_ptr(env, ri); |
| |
| if (!u32p) { |
| return; |
| } |
| |
| u32p += env->pmsav7.rnr[M_REG_NS]; |
| tlb_flush(CPU(cpu)); /* Mappings may have changed - purge! */ |
| *u32p = value; |
| } |
| |
| static void pmsav7_rgnr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| uint32_t nrgs = cpu->pmsav7_dregion; |
| |
| if (value >= nrgs) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "PMSAv7 RGNR write >= # supported regions, %" PRIu32 |
| " > %" PRIu32 "\n", (uint32_t)value, nrgs); |
| return; |
| } |
| |
| raw_write(env, ri, value); |
| } |
| |
| static const ARMCPRegInfo pmsav7_cp_reginfo[] = { |
| /* Reset for all these registers is handled in arm_cpu_reset(), |
| * because the PMSAv7 is also used by M-profile CPUs, which do |
| * not register cpregs but still need the state to be reset. |
| */ |
| { .name = "DRBAR", .cp = 15, .crn = 6, .opc1 = 0, .crm = 1, .opc2 = 0, |
| .access = PL1_RW, .type = ARM_CP_NO_RAW, |
| .fieldoffset = offsetof(CPUARMState, pmsav7.drbar), |
| .readfn = pmsav7_read, .writefn = pmsav7_write, |
| .resetfn = arm_cp_reset_ignore }, |
| { .name = "DRSR", .cp = 15, .crn = 6, .opc1 = 0, .crm = 1, .opc2 = 2, |
| .access = PL1_RW, .type = ARM_CP_NO_RAW, |
| .fieldoffset = offsetof(CPUARMState, pmsav7.drsr), |
| .readfn = pmsav7_read, .writefn = pmsav7_write, |
| .resetfn = arm_cp_reset_ignore }, |
| { .name = "DRACR", .cp = 15, .crn = 6, .opc1 = 0, .crm = 1, .opc2 = 4, |
| .access = PL1_RW, .type = ARM_CP_NO_RAW, |
| .fieldoffset = offsetof(CPUARMState, pmsav7.dracr), |
| .readfn = pmsav7_read, .writefn = pmsav7_write, |
| .resetfn = arm_cp_reset_ignore }, |
| { .name = "RGNR", .cp = 15, .crn = 6, .opc1 = 0, .crm = 2, .opc2 = 0, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, pmsav7.rnr[M_REG_NS]), |
| .writefn = pmsav7_rgnr_write, |
| .resetfn = arm_cp_reset_ignore }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo pmsav5_cp_reginfo[] = { |
| { .name = "DATA_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .type = ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, cp15.pmsav5_data_ap), |
| .readfn = pmsav5_data_ap_read, .writefn = pmsav5_data_ap_write, }, |
| { .name = "INSN_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, .type = ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, cp15.pmsav5_insn_ap), |
| .readfn = pmsav5_insn_ap_read, .writefn = pmsav5_insn_ap_write, }, |
| { .name = "DATA_EXT_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 2, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.pmsav5_data_ap), |
| .resetvalue = 0, }, |
| { .name = "INSN_EXT_AP", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 3, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.pmsav5_insn_ap), |
| .resetvalue = 0, }, |
| { .name = "DCACHE_CFG", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c2_data), .resetvalue = 0, }, |
| { .name = "ICACHE_CFG", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c2_insn), .resetvalue = 0, }, |
| /* Protection region base and size registers */ |
| { .name = "946_PRBS0", .cp = 15, .crn = 6, .crm = 0, .opc1 = 0, |
| .opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c6_region[0]) }, |
| { .name = "946_PRBS1", .cp = 15, .crn = 6, .crm = 1, .opc1 = 0, |
| .opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c6_region[1]) }, |
| { .name = "946_PRBS2", .cp = 15, .crn = 6, .crm = 2, .opc1 = 0, |
| .opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c6_region[2]) }, |
| { .name = "946_PRBS3", .cp = 15, .crn = 6, .crm = 3, .opc1 = 0, |
| .opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c6_region[3]) }, |
| { .name = "946_PRBS4", .cp = 15, .crn = 6, .crm = 4, .opc1 = 0, |
| .opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c6_region[4]) }, |
| { .name = "946_PRBS5", .cp = 15, .crn = 6, .crm = 5, .opc1 = 0, |
| .opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c6_region[5]) }, |
| { .name = "946_PRBS6", .cp = 15, .crn = 6, .crm = 6, .opc1 = 0, |
| .opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c6_region[6]) }, |
| { .name = "946_PRBS7", .cp = 15, .crn = 6, .crm = 7, .opc1 = 0, |
| .opc2 = CP_ANY, .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c6_region[7]) }, |
| REGINFO_SENTINEL |
| }; |
| |
| static void vmsa_ttbcr_raw_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| TCR *tcr = raw_ptr(env, ri); |
| int maskshift = extract32(value, 0, 3); |
| |
| if (!arm_feature(env, ARM_FEATURE_V8)) { |
| if (arm_feature(env, ARM_FEATURE_LPAE) && (value & TTBCR_EAE)) { |
| /* Pre ARMv8 bits [21:19], [15:14] and [6:3] are UNK/SBZP when |
| * using Long-desciptor translation table format */ |
| value &= ~((7 << 19) | (3 << 14) | (0xf << 3)); |
| } else if (arm_feature(env, ARM_FEATURE_EL3)) { |
| /* In an implementation that includes the Security Extensions |
| * TTBCR has additional fields PD0 [4] and PD1 [5] for |
| * Short-descriptor translation table format. |
| */ |
| value &= TTBCR_PD1 | TTBCR_PD0 | TTBCR_N; |
| } else { |
| value &= TTBCR_N; |
| } |
| } |
| |
| /* Update the masks corresponding to the TCR bank being written |
| * Note that we always calculate mask and base_mask, but |
| * they are only used for short-descriptor tables (ie if EAE is 0); |
| * for long-descriptor tables the TCR fields are used differently |
| * and the mask and base_mask values are meaningless. |
| */ |
| tcr->raw_tcr = value; |
| tcr->mask = ~(((uint32_t)0xffffffffu) >> maskshift); |
| tcr->base_mask = ~((uint32_t)0x3fffu >> maskshift); |
| } |
| |
| static void vmsa_ttbcr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| TCR *tcr = raw_ptr(env, ri); |
| |
| if (arm_feature(env, ARM_FEATURE_LPAE)) { |
| /* With LPAE the TTBCR could result in a change of ASID |
| * via the TTBCR.A1 bit, so do a TLB flush. |
| */ |
| tlb_flush(CPU(cpu)); |
| } |
| /* Preserve the high half of TCR_EL1, set via TTBCR2. */ |
| value = deposit64(tcr->raw_tcr, 0, 32, value); |
| vmsa_ttbcr_raw_write(env, ri, value); |
| } |
| |
| static void vmsa_ttbcr_reset(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| TCR *tcr = raw_ptr(env, ri); |
| |
| /* Reset both the TCR as well as the masks corresponding to the bank of |
| * the TCR being reset. |
| */ |
| tcr->raw_tcr = 0; |
| tcr->mask = 0; |
| tcr->base_mask = 0xffffc000u; |
| } |
| |
| static void vmsa_tcr_el12_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| TCR *tcr = raw_ptr(env, ri); |
| |
| /* For AArch64 the A1 bit could result in a change of ASID, so TLB flush. */ |
| tlb_flush(CPU(cpu)); |
| tcr->raw_tcr = value; |
| } |
| |
| static void vmsa_ttbr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* If the ASID changes (with a 64-bit write), we must flush the TLB. */ |
| if (cpreg_field_is_64bit(ri) && |
| extract64(raw_read(env, ri) ^ value, 48, 16) != 0) { |
| ARMCPU *cpu = env_archcpu(env); |
| tlb_flush(CPU(cpu)); |
| } |
| raw_write(env, ri, value); |
| } |
| |
| static void vmsa_tcr_ttbr_el2_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * If we are running with E2&0 regime, then an ASID is active. |
| * Flush if that might be changing. Note we're not checking |
| * TCR_EL2.A1 to know if this is really the TTBRx_EL2 that |
| * holds the active ASID, only checking the field that might. |
| */ |
| if (extract64(raw_read(env, ri) ^ value, 48, 16) && |
| (arm_hcr_el2_eff(env) & HCR_E2H)) { |
| uint16_t mask = ARMMMUIdxBit_E20_2 | |
| ARMMMUIdxBit_E20_2_PAN | |
| ARMMMUIdxBit_E20_0; |
| |
| if (arm_is_secure_below_el3(env)) { |
| mask >>= ARM_MMU_IDX_A_NS; |
| } |
| |
| tlb_flush_by_mmuidx(env_cpu(env), mask); |
| } |
| raw_write(env, ri, value); |
| } |
| |
| static void vttbr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| CPUState *cs = CPU(cpu); |
| |
| /* |
| * A change in VMID to the stage2 page table (Stage2) invalidates |
| * the combined stage 1&2 tlbs (EL10_1 and EL10_0). |
| */ |
| if (raw_read(env, ri) != value) { |
| uint16_t mask = ARMMMUIdxBit_E10_1 | |
| ARMMMUIdxBit_E10_1_PAN | |
| ARMMMUIdxBit_E10_0; |
| |
| if (arm_is_secure_below_el3(env)) { |
| mask >>= ARM_MMU_IDX_A_NS; |
| } |
| |
| tlb_flush_by_mmuidx(cs, mask); |
| raw_write(env, ri, value); |
| } |
| } |
| |
| static const ARMCPRegInfo vmsa_pmsa_cp_reginfo[] = { |
| { .name = "DFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, .type = ARM_CP_ALIAS, |
| .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dfsr_s), |
| offsetoflow32(CPUARMState, cp15.dfsr_ns) }, }, |
| { .name = "IFSR", .cp = 15, .crn = 5, .crm = 0, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, |
| .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.ifsr_s), |
| offsetoflow32(CPUARMState, cp15.ifsr_ns) } }, |
| { .name = "DFAR", .cp = 15, .opc1 = 0, .crn = 6, .crm = 0, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.dfar_s), |
| offsetof(CPUARMState, cp15.dfar_ns) } }, |
| { .name = "FAR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .crn = 6, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .fieldoffset = offsetof(CPUARMState, cp15.far_el[1]), |
| .resetvalue = 0, }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo vmsa_cp_reginfo[] = { |
| { .name = "ESR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .crn = 5, .crm = 2, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .fieldoffset = offsetof(CPUARMState, cp15.esr_el[1]), .resetvalue = 0, }, |
| { .name = "TTBR0_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .writefn = vmsa_ttbr_write, .resetvalue = 0, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s), |
| offsetof(CPUARMState, cp15.ttbr0_ns) } }, |
| { .name = "TTBR1_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .writefn = vmsa_ttbr_write, .resetvalue = 0, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s), |
| offsetof(CPUARMState, cp15.ttbr1_ns) } }, |
| { .name = "TCR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .writefn = vmsa_tcr_el12_write, |
| .resetfn = vmsa_ttbcr_reset, .raw_writefn = raw_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.tcr_el[1]) }, |
| { .name = "TTBCR", .cp = 15, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .type = ARM_CP_ALIAS, .writefn = vmsa_ttbcr_write, |
| .raw_writefn = vmsa_ttbcr_raw_write, |
| /* No offsetoflow32 -- pass the entire TCR to writefn/raw_writefn. */ |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.tcr_el[3]), |
| offsetof(CPUARMState, cp15.tcr_el[1])} }, |
| REGINFO_SENTINEL |
| }; |
| |
| /* Note that unlike TTBCR, writing to TTBCR2 does not require flushing |
| * qemu tlbs nor adjusting cached masks. |
| */ |
| static const ARMCPRegInfo ttbcr2_reginfo = { |
| .name = "TTBCR2", .cp = 15, .opc1 = 0, .crn = 2, .crm = 0, .opc2 = 3, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .type = ARM_CP_ALIAS, |
| .bank_fieldoffsets = { |
| offsetofhigh32(CPUARMState, cp15.tcr_el[3].raw_tcr), |
| offsetofhigh32(CPUARMState, cp15.tcr_el[1].raw_tcr), |
| }, |
| }; |
| |
| static void omap_ticonfig_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->cp15.c15_ticonfig = value & 0xe7; |
| /* The OS_TYPE bit in this register changes the reported CPUID! */ |
| env->cp15.c0_cpuid = (value & (1 << 5)) ? |
| ARM_CPUID_TI915T : ARM_CPUID_TI925T; |
| } |
| |
| static void omap_threadid_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->cp15.c15_threadid = value & 0xffff; |
| } |
| |
| static void omap_wfi_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Wait-for-interrupt (deprecated) */ |
| cpu_interrupt(env_cpu(env), CPU_INTERRUPT_HALT); |
| } |
| |
| static void omap_cachemaint_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* On OMAP there are registers indicating the max/min index of dcache lines |
| * containing a dirty line; cache flush operations have to reset these. |
| */ |
| env->cp15.c15_i_max = 0x000; |
| env->cp15.c15_i_min = 0xff0; |
| } |
| |
| static const ARMCPRegInfo omap_cp_reginfo[] = { |
| { .name = "DFSR", .cp = 15, .crn = 5, .crm = CP_ANY, |
| .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, .type = ARM_CP_OVERRIDE, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.esr_el[1]), |
| .resetvalue = 0, }, |
| { .name = "", .cp = 15, .crn = 15, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .type = ARM_CP_NOP }, |
| { .name = "TICONFIG", .cp = 15, .crn = 15, .crm = 1, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_ticonfig), .resetvalue = 0, |
| .writefn = omap_ticonfig_write }, |
| { .name = "IMAX", .cp = 15, .crn = 15, .crm = 2, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_i_max), .resetvalue = 0, }, |
| { .name = "IMIN", .cp = 15, .crn = 15, .crm = 3, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .resetvalue = 0xff0, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_i_min) }, |
| { .name = "THREADID", .cp = 15, .crn = 15, .crm = 4, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_threadid), .resetvalue = 0, |
| .writefn = omap_threadid_write }, |
| { .name = "TI925T_STATUS", .cp = 15, .crn = 15, |
| .crm = 8, .opc1 = 0, .opc2 = 0, .access = PL1_RW, |
| .type = ARM_CP_NO_RAW, |
| .readfn = arm_cp_read_zero, .writefn = omap_wfi_write, }, |
| /* TODO: Peripheral port remap register: |
| * On OMAP2 mcr p15, 0, rn, c15, c2, 4 sets up the interrupt controller |
| * base address at $rn & ~0xfff and map size of 0x200 << ($rn & 0xfff), |
| * when MMU is off. |
| */ |
| { .name = "OMAP_CACHEMAINT", .cp = 15, .crn = 7, .crm = CP_ANY, |
| .opc1 = 0, .opc2 = CP_ANY, .access = PL1_W, |
| .type = ARM_CP_OVERRIDE | ARM_CP_NO_RAW, |
| .writefn = omap_cachemaint_write }, |
| { .name = "C9", .cp = 15, .crn = 9, |
| .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_RW, |
| .type = ARM_CP_CONST | ARM_CP_OVERRIDE, .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| |
| static void xscale_cpar_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->cp15.c15_cpar = value & 0x3fff; |
| } |
| |
| static const ARMCPRegInfo xscale_cp_reginfo[] = { |
| { .name = "XSCALE_CPAR", |
| .cp = 15, .crn = 15, .crm = 1, .opc1 = 0, .opc2 = 0, .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c15_cpar), .resetvalue = 0, |
| .writefn = xscale_cpar_write, }, |
| { .name = "XSCALE_AUXCR", |
| .cp = 15, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 1, .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c1_xscaleauxcr), |
| .resetvalue = 0, }, |
| /* XScale specific cache-lockdown: since we have no cache we NOP these |
| * and hope the guest does not really rely on cache behaviour. |
| */ |
| { .name = "XSCALE_LOCK_ICACHE_LINE", |
| .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 0, |
| .access = PL1_W, .type = ARM_CP_NOP }, |
| { .name = "XSCALE_UNLOCK_ICACHE", |
| .cp = 15, .opc1 = 0, .crn = 9, .crm = 1, .opc2 = 1, |
| .access = PL1_W, .type = ARM_CP_NOP }, |
| { .name = "XSCALE_DCACHE_LOCK", |
| .cp = 15, .opc1 = 0, .crn = 9, .crm = 2, .opc2 = 0, |
| .access = PL1_RW, .type = ARM_CP_NOP }, |
| { .name = "XSCALE_UNLOCK_DCACHE", |
| .cp = 15, .opc1 = 0, .crn = 9, .crm = 2, .opc2 = 1, |
| .access = PL1_W, .type = ARM_CP_NOP }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo dummy_c15_cp_reginfo[] = { |
| /* RAZ/WI the whole crn=15 space, when we don't have a more specific |
| * implementation of this implementation-defined space. |
| * Ideally this should eventually disappear in favour of actually |
| * implementing the correct behaviour for all cores. |
| */ |
| { .name = "C15_IMPDEF", .cp = 15, .crn = 15, |
| .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY, |
| .access = PL1_RW, |
| .type = ARM_CP_CONST | ARM_CP_NO_RAW | ARM_CP_OVERRIDE, |
| .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo cache_dirty_status_cp_reginfo[] = { |
| /* Cache status: RAZ because we have no cache so it's always clean */ |
| { .name = "CDSR", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 6, |
| .access = PL1_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW, |
| .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo cache_block_ops_cp_reginfo[] = { |
| /* We never have a a block transfer operation in progress */ |
| { .name = "BXSR", .cp = 15, .crn = 7, .crm = 12, .opc1 = 0, .opc2 = 4, |
| .access = PL0_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW, |
| .resetvalue = 0 }, |
| /* The cache ops themselves: these all NOP for QEMU */ |
| { .name = "IICR", .cp = 15, .crm = 5, .opc1 = 0, |
| .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, |
| { .name = "IDCR", .cp = 15, .crm = 6, .opc1 = 0, |
| .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, |
| { .name = "CDCR", .cp = 15, .crm = 12, .opc1 = 0, |
| .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, |
| { .name = "PIR", .cp = 15, .crm = 12, .opc1 = 1, |
| .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, |
| { .name = "PDR", .cp = 15, .crm = 12, .opc1 = 2, |
| .access = PL0_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, |
| { .name = "CIDCR", .cp = 15, .crm = 14, .opc1 = 0, |
| .access = PL1_W, .type = ARM_CP_NOP|ARM_CP_64BIT }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo cache_test_clean_cp_reginfo[] = { |
| /* The cache test-and-clean instructions always return (1 << 30) |
| * to indicate that there are no dirty cache lines. |
| */ |
| { .name = "TC_DCACHE", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 3, |
| .access = PL0_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW, |
| .resetvalue = (1 << 30) }, |
| { .name = "TCI_DCACHE", .cp = 15, .crn = 7, .crm = 14, .opc1 = 0, .opc2 = 3, |
| .access = PL0_R, .type = ARM_CP_CONST | ARM_CP_NO_RAW, |
| .resetvalue = (1 << 30) }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo strongarm_cp_reginfo[] = { |
| /* Ignore ReadBuffer accesses */ |
| { .name = "C9_READBUFFER", .cp = 15, .crn = 9, |
| .crm = CP_ANY, .opc1 = CP_ANY, .opc2 = CP_ANY, |
| .access = PL1_RW, .resetvalue = 0, |
| .type = ARM_CP_CONST | ARM_CP_OVERRIDE | ARM_CP_NO_RAW }, |
| REGINFO_SENTINEL |
| }; |
| |
| static uint64_t midr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| unsigned int cur_el = arm_current_el(env); |
| |
| if (arm_is_el2_enabled(env) && cur_el == 1) { |
| return env->cp15.vpidr_el2; |
| } |
| return raw_read(env, ri); |
| } |
| |
| static uint64_t mpidr_read_val(CPUARMState *env) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| uint64_t mpidr = cpu->mp_affinity; |
| |
| if (arm_feature(env, ARM_FEATURE_V7MP)) { |
| mpidr |= (1U << 31); |
| /* Cores which are uniprocessor (non-coherent) |
| * but still implement the MP extensions set |
| * bit 30. (For instance, Cortex-R5). |
| */ |
| if (cpu->mp_is_up) { |
| mpidr |= (1u << 30); |
| } |
| } |
| return mpidr; |
| } |
| |
| static uint64_t mpidr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| unsigned int cur_el = arm_current_el(env); |
| |
| if (arm_is_el2_enabled(env) && cur_el == 1) { |
| return env->cp15.vmpidr_el2; |
| } |
| return mpidr_read_val(env); |
| } |
| |
| static const ARMCPRegInfo lpae_cp_reginfo[] = { |
| /* NOP AMAIR0/1 */ |
| { .name = "AMAIR0", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| /* AMAIR1 is mapped to AMAIR_EL1[63:32] */ |
| { .name = "AMAIR1", .cp = 15, .crn = 10, .crm = 3, .opc1 = 0, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "PAR", .cp = 15, .crm = 7, .opc1 = 0, |
| .access = PL1_RW, .type = ARM_CP_64BIT, .resetvalue = 0, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.par_s), |
| offsetof(CPUARMState, cp15.par_ns)} }, |
| { .name = "TTBR0", .cp = 15, .crm = 2, .opc1 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .type = ARM_CP_64BIT | ARM_CP_ALIAS, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s), |
| offsetof(CPUARMState, cp15.ttbr0_ns) }, |
| .writefn = vmsa_ttbr_write, }, |
| { .name = "TTBR1", .cp = 15, .crm = 2, .opc1 = 1, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .type = ARM_CP_64BIT | ARM_CP_ALIAS, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s), |
| offsetof(CPUARMState, cp15.ttbr1_ns) }, |
| .writefn = vmsa_ttbr_write, }, |
| REGINFO_SENTINEL |
| }; |
| |
| static uint64_t aa64_fpcr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return vfp_get_fpcr(env); |
| } |
| |
| static void aa64_fpcr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| vfp_set_fpcr(env, value); |
| } |
| |
| static uint64_t aa64_fpsr_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return vfp_get_fpsr(env); |
| } |
| |
| static void aa64_fpsr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| vfp_set_fpsr(env, value); |
| } |
| |
| static CPAccessResult aa64_daif_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 0 && !(arm_sctlr(env, 0) & SCTLR_UMA)) { |
| return CP_ACCESS_TRAP; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static void aa64_daif_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->daif = value & PSTATE_DAIF; |
| } |
| |
| static uint64_t aa64_pan_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return env->pstate & PSTATE_PAN; |
| } |
| |
| static void aa64_pan_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->pstate = (env->pstate & ~PSTATE_PAN) | (value & PSTATE_PAN); |
| } |
| |
| static const ARMCPRegInfo pan_reginfo = { |
| .name = "PAN", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 4, .crm = 2, .opc2 = 3, |
| .type = ARM_CP_NO_RAW, .access = PL1_RW, |
| .readfn = aa64_pan_read, .writefn = aa64_pan_write |
| }; |
| |
| static uint64_t aa64_uao_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return env->pstate & PSTATE_UAO; |
| } |
| |
| static void aa64_uao_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->pstate = (env->pstate & ~PSTATE_UAO) | (value & PSTATE_UAO); |
| } |
| |
| static const ARMCPRegInfo uao_reginfo = { |
| .name = "UAO", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 4, .crm = 2, .opc2 = 4, |
| .type = ARM_CP_NO_RAW, .access = PL1_RW, |
| .readfn = aa64_uao_read, .writefn = aa64_uao_write |
| }; |
| |
| static uint64_t aa64_dit_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return env->pstate & PSTATE_DIT; |
| } |
| |
| static void aa64_dit_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->pstate = (env->pstate & ~PSTATE_DIT) | (value & PSTATE_DIT); |
| } |
| |
| static const ARMCPRegInfo dit_reginfo = { |
| .name = "DIT", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 5, |
| .type = ARM_CP_NO_RAW, .access = PL0_RW, |
| .readfn = aa64_dit_read, .writefn = aa64_dit_write |
| }; |
| |
| static uint64_t aa64_ssbs_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return env->pstate & PSTATE_SSBS; |
| } |
| |
| static void aa64_ssbs_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->pstate = (env->pstate & ~PSTATE_SSBS) | (value & PSTATE_SSBS); |
| } |
| |
| static const ARMCPRegInfo ssbs_reginfo = { |
| .name = "SSBS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 6, |
| .type = ARM_CP_NO_RAW, .access = PL0_RW, |
| .readfn = aa64_ssbs_read, .writefn = aa64_ssbs_write |
| }; |
| |
| static CPAccessResult aa64_cacheop_poc_access(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* Cache invalidate/clean to Point of Coherency or Persistence... */ |
| switch (arm_current_el(env)) { |
| case 0: |
| /* ... EL0 must UNDEF unless SCTLR_EL1.UCI is set. */ |
| if (!(arm_sctlr(env, 0) & SCTLR_UCI)) { |
| return CP_ACCESS_TRAP; |
| } |
| /* fall through */ |
| case 1: |
| /* ... EL1 must trap to EL2 if HCR_EL2.TPCP is set. */ |
| if (arm_hcr_el2_eff(env) & HCR_TPCP) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| break; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult aa64_cacheop_pou_access(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* Cache invalidate/clean to Point of Unification... */ |
| switch (arm_current_el(env)) { |
| case 0: |
| /* ... EL0 must UNDEF unless SCTLR_EL1.UCI is set. */ |
| if (!(arm_sctlr(env, 0) & SCTLR_UCI)) { |
| return CP_ACCESS_TRAP; |
| } |
| /* fall through */ |
| case 1: |
| /* ... EL1 must trap to EL2 if HCR_EL2.TPU is set. */ |
| if (arm_hcr_el2_eff(env) & HCR_TPU) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| break; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| /* See: D4.7.2 TLB maintenance requirements and the TLB maintenance instructions |
| * Page D4-1736 (DDI0487A.b) |
| */ |
| |
| static int vae1_tlbmask(CPUARMState *env) |
| { |
| uint64_t hcr = arm_hcr_el2_eff(env); |
| uint16_t mask; |
| |
| if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { |
| mask = ARMMMUIdxBit_E20_2 | |
| ARMMMUIdxBit_E20_2_PAN | |
| ARMMMUIdxBit_E20_0; |
| } else { |
| mask = ARMMMUIdxBit_E10_1 | |
| ARMMMUIdxBit_E10_1_PAN | |
| ARMMMUIdxBit_E10_0; |
| } |
| |
| if (arm_is_secure_below_el3(env)) { |
| mask >>= ARM_MMU_IDX_A_NS; |
| } |
| |
| return mask; |
| } |
| |
| /* Return 56 if TBI is enabled, 64 otherwise. */ |
| static int tlbbits_for_regime(CPUARMState *env, ARMMMUIdx mmu_idx, |
| uint64_t addr) |
| { |
| uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr; |
| int tbi = aa64_va_parameter_tbi(tcr, mmu_idx); |
| int select = extract64(addr, 55, 1); |
| |
| return (tbi >> select) & 1 ? 56 : 64; |
| } |
| |
| static int vae1_tlbbits(CPUARMState *env, uint64_t addr) |
| { |
| uint64_t hcr = arm_hcr_el2_eff(env); |
| ARMMMUIdx mmu_idx; |
| |
| /* Only the regime of the mmu_idx below is significant. */ |
| if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { |
| mmu_idx = ARMMMUIdx_E20_0; |
| } else { |
| mmu_idx = ARMMMUIdx_E10_0; |
| } |
| |
| if (arm_is_secure_below_el3(env)) { |
| mmu_idx &= ~ARM_MMU_IDX_A_NS; |
| } |
| |
| return tlbbits_for_regime(env, mmu_idx, addr); |
| } |
| |
| static void tlbi_aa64_vmalle1is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| int mask = vae1_tlbmask(env); |
| |
| tlb_flush_by_mmuidx_all_cpus_synced(cs, mask); |
| } |
| |
| static void tlbi_aa64_vmalle1_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| int mask = vae1_tlbmask(env); |
| |
| if (tlb_force_broadcast(env)) { |
| tlb_flush_by_mmuidx_all_cpus_synced(cs, mask); |
| } else { |
| tlb_flush_by_mmuidx(cs, mask); |
| } |
| } |
| |
| static int alle1_tlbmask(CPUARMState *env) |
| { |
| /* |
| * Note that the 'ALL' scope must invalidate both stage 1 and |
| * stage 2 translations, whereas most other scopes only invalidate |
| * stage 1 translations. |
| */ |
| if (arm_is_secure_below_el3(env)) { |
| return ARMMMUIdxBit_SE10_1 | |
| ARMMMUIdxBit_SE10_1_PAN | |
| ARMMMUIdxBit_SE10_0; |
| } else { |
| return ARMMMUIdxBit_E10_1 | |
| ARMMMUIdxBit_E10_1_PAN | |
| ARMMMUIdxBit_E10_0; |
| } |
| } |
| |
| static int e2_tlbmask(CPUARMState *env) |
| { |
| if (arm_is_secure_below_el3(env)) { |
| return ARMMMUIdxBit_SE20_0 | |
| ARMMMUIdxBit_SE20_2 | |
| ARMMMUIdxBit_SE20_2_PAN | |
| ARMMMUIdxBit_SE2; |
| } else { |
| return ARMMMUIdxBit_E20_0 | |
| ARMMMUIdxBit_E20_2 | |
| ARMMMUIdxBit_E20_2_PAN | |
| ARMMMUIdxBit_E2; |
| } |
| } |
| |
| static void tlbi_aa64_alle1_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| int mask = alle1_tlbmask(env); |
| |
| tlb_flush_by_mmuidx(cs, mask); |
| } |
| |
| static void tlbi_aa64_alle2_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| int mask = e2_tlbmask(env); |
| |
| tlb_flush_by_mmuidx(cs, mask); |
| } |
| |
| static void tlbi_aa64_alle3_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| CPUState *cs = CPU(cpu); |
| |
| tlb_flush_by_mmuidx(cs, ARMMMUIdxBit_SE3); |
| } |
| |
| static void tlbi_aa64_alle1is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| int mask = alle1_tlbmask(env); |
| |
| tlb_flush_by_mmuidx_all_cpus_synced(cs, mask); |
| } |
| |
| static void tlbi_aa64_alle2is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| int mask = e2_tlbmask(env); |
| |
| tlb_flush_by_mmuidx_all_cpus_synced(cs, mask); |
| } |
| |
| static void tlbi_aa64_alle3is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| |
| tlb_flush_by_mmuidx_all_cpus_synced(cs, ARMMMUIdxBit_SE3); |
| } |
| |
| static void tlbi_aa64_vae2_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Invalidate by VA, EL2 |
| * Currently handles both VAE2 and VALE2, since we don't support |
| * flush-last-level-only. |
| */ |
| CPUState *cs = env_cpu(env); |
| int mask = e2_tlbmask(env); |
| uint64_t pageaddr = sextract64(value << 12, 0, 56); |
| |
| tlb_flush_page_by_mmuidx(cs, pageaddr, mask); |
| } |
| |
| static void tlbi_aa64_vae3_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Invalidate by VA, EL3 |
| * Currently handles both VAE3 and VALE3, since we don't support |
| * flush-last-level-only. |
| */ |
| ARMCPU *cpu = env_archcpu(env); |
| CPUState *cs = CPU(cpu); |
| uint64_t pageaddr = sextract64(value << 12, 0, 56); |
| |
| tlb_flush_page_by_mmuidx(cs, pageaddr, ARMMMUIdxBit_SE3); |
| } |
| |
| static void tlbi_aa64_vae1is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| int mask = vae1_tlbmask(env); |
| uint64_t pageaddr = sextract64(value << 12, 0, 56); |
| int bits = vae1_tlbbits(env, pageaddr); |
| |
| tlb_flush_page_bits_by_mmuidx_all_cpus_synced(cs, pageaddr, mask, bits); |
| } |
| |
| static void tlbi_aa64_vae1_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Invalidate by VA, EL1&0 (AArch64 version). |
| * Currently handles all of VAE1, VAAE1, VAALE1 and VALE1, |
| * since we don't support flush-for-specific-ASID-only or |
| * flush-last-level-only. |
| */ |
| CPUState *cs = env_cpu(env); |
| int mask = vae1_tlbmask(env); |
| uint64_t pageaddr = sextract64(value << 12, 0, 56); |
| int bits = vae1_tlbbits(env, pageaddr); |
| |
| if (tlb_force_broadcast(env)) { |
| tlb_flush_page_bits_by_mmuidx_all_cpus_synced(cs, pageaddr, mask, bits); |
| } else { |
| tlb_flush_page_bits_by_mmuidx(cs, pageaddr, mask, bits); |
| } |
| } |
| |
| static void tlbi_aa64_vae2is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| uint64_t pageaddr = sextract64(value << 12, 0, 56); |
| bool secure = arm_is_secure_below_el3(env); |
| int mask = secure ? ARMMMUIdxBit_SE2 : ARMMMUIdxBit_E2; |
| int bits = tlbbits_for_regime(env, secure ? ARMMMUIdx_SE2 : ARMMMUIdx_E2, |
| pageaddr); |
| |
| tlb_flush_page_bits_by_mmuidx_all_cpus_synced(cs, pageaddr, mask, bits); |
| } |
| |
| static void tlbi_aa64_vae3is_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPUState *cs = env_cpu(env); |
| uint64_t pageaddr = sextract64(value << 12, 0, 56); |
| int bits = tlbbits_for_regime(env, ARMMMUIdx_SE3, pageaddr); |
| |
| tlb_flush_page_bits_by_mmuidx_all_cpus_synced(cs, pageaddr, |
| ARMMMUIdxBit_SE3, bits); |
| } |
| |
| #ifdef TARGET_AARCH64 |
| typedef struct { |
| uint64_t base; |
| uint64_t length; |
| } TLBIRange; |
| |
| static TLBIRange tlbi_aa64_get_range(CPUARMState *env, ARMMMUIdx mmuidx, |
| uint64_t value) |
| { |
| unsigned int page_size_granule, page_shift, num, scale, exponent; |
| /* Extract one bit to represent the va selector in use. */ |
| uint64_t select = sextract64(value, 36, 1); |
| ARMVAParameters param = aa64_va_parameters(env, select, mmuidx, true); |
| TLBIRange ret = { }; |
| |
| page_size_granule = extract64(value, 46, 2); |
| |
| /* The granule encoded in value must match the granule in use. */ |
| if (page_size_granule != (param.using64k ? 3 : param.using16k ? 2 : 1)) { |
| qemu_log_mask(LOG_GUEST_ERROR, "Invalid tlbi page size granule %d\n", |
| page_size_granule); |
| return ret; |
| } |
| |
| page_shift = (page_size_granule - 1) * 2 + 12; |
| num = extract64(value, 39, 5); |
| scale = extract64(value, 44, 2); |
| exponent = (5 * scale) + 1; |
| |
| ret.length = (num + 1) << (exponent + page_shift); |
| |
| if (param.select) { |
| ret.base = sextract64(value, 0, 37); |
| } else { |
| ret.base = extract64(value, 0, 37); |
| } |
| if (param.ds) { |
| /* |
| * With DS=1, BaseADDR is always shifted 16 so that it is able |
| * to address all 52 va bits. The input address is perforce |
| * aligned on a 64k boundary regardless of translation granule. |
| */ |
| page_shift = 16; |
| } |
| ret.base <<= page_shift; |
| |
| return ret; |
| } |
| |
| static void do_rvae_write(CPUARMState *env, uint64_t value, |
| int idxmap, bool synced) |
| { |
| ARMMMUIdx one_idx = ARM_MMU_IDX_A | ctz32(idxmap); |
| TLBIRange range; |
| int bits; |
| |
| range = tlbi_aa64_get_range(env, one_idx, value); |
| bits = tlbbits_for_regime(env, one_idx, range.base); |
| |
| if (synced) { |
| tlb_flush_range_by_mmuidx_all_cpus_synced(env_cpu(env), |
| range.base, |
| range.length, |
| idxmap, |
| bits); |
| } else { |
| tlb_flush_range_by_mmuidx(env_cpu(env), range.base, |
| range.length, idxmap, bits); |
| } |
| } |
| |
| static void tlbi_aa64_rvae1_write(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * Invalidate by VA range, EL1&0. |
| * Currently handles all of RVAE1, RVAAE1, RVAALE1 and RVALE1, |
| * since we don't support flush-for-specific-ASID-only or |
| * flush-last-level-only. |
| */ |
| |
| do_rvae_write(env, value, vae1_tlbmask(env), |
| tlb_force_broadcast(env)); |
| } |
| |
| static void tlbi_aa64_rvae1is_write(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * Invalidate by VA range, Inner/Outer Shareable EL1&0. |
| * Currently handles all of RVAE1IS, RVAE1OS, RVAAE1IS, RVAAE1OS, |
| * RVAALE1IS, RVAALE1OS, RVALE1IS and RVALE1OS, since we don't support |
| * flush-for-specific-ASID-only, flush-last-level-only or inner/outer |
| * shareable specific flushes. |
| */ |
| |
| do_rvae_write(env, value, vae1_tlbmask(env), true); |
| } |
| |
| static int vae2_tlbmask(CPUARMState *env) |
| { |
| return (arm_is_secure_below_el3(env) |
| ? ARMMMUIdxBit_SE2 : ARMMMUIdxBit_E2); |
| } |
| |
| static void tlbi_aa64_rvae2_write(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * Invalidate by VA range, EL2. |
| * Currently handles all of RVAE2 and RVALE2, |
| * since we don't support flush-for-specific-ASID-only or |
| * flush-last-level-only. |
| */ |
| |
| do_rvae_write(env, value, vae2_tlbmask(env), |
| tlb_force_broadcast(env)); |
| |
| |
| } |
| |
| static void tlbi_aa64_rvae2is_write(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * Invalidate by VA range, Inner/Outer Shareable, EL2. |
| * Currently handles all of RVAE2IS, RVAE2OS, RVALE2IS and RVALE2OS, |
| * since we don't support flush-for-specific-ASID-only, |
| * flush-last-level-only or inner/outer shareable specific flushes. |
| */ |
| |
| do_rvae_write(env, value, vae2_tlbmask(env), true); |
| |
| } |
| |
| static void tlbi_aa64_rvae3_write(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * Invalidate by VA range, EL3. |
| * Currently handles all of RVAE3 and RVALE3, |
| * since we don't support flush-for-specific-ASID-only or |
| * flush-last-level-only. |
| */ |
| |
| do_rvae_write(env, value, ARMMMUIdxBit_SE3, |
| tlb_force_broadcast(env)); |
| } |
| |
| static void tlbi_aa64_rvae3is_write(CPUARMState *env, |
| const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * Invalidate by VA range, EL3, Inner/Outer Shareable. |
| * Currently handles all of RVAE3IS, RVAE3OS, RVALE3IS and RVALE3OS, |
| * since we don't support flush-for-specific-ASID-only, |
| * flush-last-level-only or inner/outer specific flushes. |
| */ |
| |
| do_rvae_write(env, value, ARMMMUIdxBit_SE3, true); |
| } |
| #endif |
| |
| static CPAccessResult aa64_zva_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| int cur_el = arm_current_el(env); |
| |
| if (cur_el < 2) { |
| uint64_t hcr = arm_hcr_el2_eff(env); |
| |
| if (cur_el == 0) { |
| if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { |
| if (!(env->cp15.sctlr_el[2] & SCTLR_DZE)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } else { |
| if (!(env->cp15.sctlr_el[1] & SCTLR_DZE)) { |
| return CP_ACCESS_TRAP; |
| } |
| if (hcr & HCR_TDZ) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } |
| } else if (hcr & HCR_TDZ) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static uint64_t aa64_dczid_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| int dzp_bit = 1 << 4; |
| |
| /* DZP indicates whether DC ZVA access is allowed */ |
| if (aa64_zva_access(env, NULL, false) == CP_ACCESS_OK) { |
| dzp_bit = 0; |
| } |
| return cpu->dcz_blocksize | dzp_bit; |
| } |
| |
| static CPAccessResult sp_el0_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (!(env->pstate & PSTATE_SP)) { |
| /* Access to SP_EL0 is undefined if it's being used as |
| * the stack pointer. |
| */ |
| return CP_ACCESS_TRAP_UNCATEGORIZED; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static uint64_t spsel_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return env->pstate & PSTATE_SP; |
| } |
| |
| static void spsel_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t val) |
| { |
| update_spsel(env, val); |
| } |
| |
| static void sctlr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| if (arm_feature(env, ARM_FEATURE_PMSA) && !cpu->has_mpu) { |
| /* M bit is RAZ/WI for PMSA with no MPU implemented */ |
| value &= ~SCTLR_M; |
| } |
| |
| /* ??? Lots of these bits are not implemented. */ |
| |
| if (ri->state == ARM_CP_STATE_AA64 && !cpu_isar_feature(aa64_mte, cpu)) { |
| if (ri->opc1 == 6) { /* SCTLR_EL3 */ |
| value &= ~(SCTLR_ITFSB | SCTLR_TCF | SCTLR_ATA); |
| } else { |
| value &= ~(SCTLR_ITFSB | SCTLR_TCF0 | SCTLR_TCF | |
| SCTLR_ATA0 | SCTLR_ATA); |
| } |
| } |
| |
| if (raw_read(env, ri) == value) { |
| /* Skip the TLB flush if nothing actually changed; Linux likes |
| * to do a lot of pointless SCTLR writes. |
| */ |
| return; |
| } |
| |
| raw_write(env, ri, value); |
| |
| /* This may enable/disable the MMU, so do a TLB flush. */ |
| tlb_flush(CPU(cpu)); |
| |
| if (ri->type & ARM_CP_SUPPRESS_TB_END) { |
| /* |
| * Normally we would always end the TB on an SCTLR write; see the |
| * comment in ARMCPRegInfo sctlr initialization below for why Xscale |
| * is special. Setting ARM_CP_SUPPRESS_TB_END also stops the rebuild |
| * of hflags from the translator, so do it here. |
| */ |
| arm_rebuild_hflags(env); |
| } |
| } |
| |
| static CPAccessResult fpexc32_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if ((env->cp15.cptr_el[2] & CPTR_TFP) && arm_current_el(env) == 2) { |
| return CP_ACCESS_TRAP_FP_EL2; |
| } |
| if (env->cp15.cptr_el[3] & CPTR_TFP) { |
| return CP_ACCESS_TRAP_FP_EL3; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static void sdcr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| env->cp15.mdcr_el3 = value & SDCR_VALID_MASK; |
| } |
| |
| static const ARMCPRegInfo v8_cp_reginfo[] = { |
| /* Minimal set of EL0-visible registers. This will need to be expanded |
| * significantly for system emulation of AArch64 CPUs. |
| */ |
| { .name = "NZCV", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .opc2 = 0, .crn = 4, .crm = 2, |
| .access = PL0_RW, .type = ARM_CP_NZCV }, |
| { .name = "DAIF", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .opc2 = 1, .crn = 4, .crm = 2, |
| .type = ARM_CP_NO_RAW, |
| .access = PL0_RW, .accessfn = aa64_daif_access, |
| .fieldoffset = offsetof(CPUARMState, daif), |
| .writefn = aa64_daif_write, .resetfn = arm_cp_reset_ignore }, |
| { .name = "FPCR", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .opc2 = 0, .crn = 4, .crm = 4, |
| .access = PL0_RW, .type = ARM_CP_FPU | ARM_CP_SUPPRESS_TB_END, |
| .readfn = aa64_fpcr_read, .writefn = aa64_fpcr_write }, |
| { .name = "FPSR", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .opc2 = 1, .crn = 4, .crm = 4, |
| .access = PL0_RW, .type = ARM_CP_FPU | ARM_CP_SUPPRESS_TB_END, |
| .readfn = aa64_fpsr_read, .writefn = aa64_fpsr_write }, |
| { .name = "DCZID_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .opc2 = 7, .crn = 0, .crm = 0, |
| .access = PL0_R, .type = ARM_CP_NO_RAW, |
| .readfn = aa64_dczid_read }, |
| { .name = "DC_ZVA", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 4, .opc2 = 1, |
| .access = PL0_W, .type = ARM_CP_DC_ZVA, |
| #ifndef CONFIG_USER_ONLY |
| /* Avoid overhead of an access check that always passes in user-mode */ |
| .accessfn = aa64_zva_access, |
| #endif |
| }, |
| { .name = "CURRENTEL", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .opc2 = 2, .crn = 4, .crm = 2, |
| .access = PL1_R, .type = ARM_CP_CURRENTEL }, |
| /* Cache ops: all NOPs since we don't emulate caches */ |
| { .name = "IC_IALLUIS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 0, |
| .access = PL1_W, .type = ARM_CP_NOP, |
| .accessfn = aa64_cacheop_pou_access }, |
| { .name = "IC_IALLU", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 0, |
| .access = PL1_W, .type = ARM_CP_NOP, |
| .accessfn = aa64_cacheop_pou_access }, |
| { .name = "IC_IVAU", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 5, .opc2 = 1, |
| .access = PL0_W, .type = ARM_CP_NOP, |
| .accessfn = aa64_cacheop_pou_access }, |
| { .name = "DC_IVAC", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, |
| .access = PL1_W, .accessfn = aa64_cacheop_poc_access, |
| .type = ARM_CP_NOP }, |
| { .name = "DC_ISW", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, |
| .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, |
| { .name = "DC_CVAC", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 1, |
| .access = PL0_W, .type = ARM_CP_NOP, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_CSW", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, |
| .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, |
| { .name = "DC_CVAU", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 11, .opc2 = 1, |
| .access = PL0_W, .type = ARM_CP_NOP, |
| .accessfn = aa64_cacheop_pou_access }, |
| { .name = "DC_CIVAC", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 1, |
| .access = PL0_W, .type = ARM_CP_NOP, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_CISW", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, |
| .access = PL1_W, .accessfn = access_tsw, .type = ARM_CP_NOP }, |
| /* TLBI operations */ |
| { .name = "TLBI_VMALLE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 0, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vmalle1is_write }, |
| { .name = "TLBI_VAE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 1, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae1is_write }, |
| { .name = "TLBI_ASIDE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 2, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vmalle1is_write }, |
| { .name = "TLBI_VAAE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 3, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae1is_write }, |
| { .name = "TLBI_VALE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae1is_write }, |
| { .name = "TLBI_VAALE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 7, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae1is_write }, |
| { .name = "TLBI_VMALLE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 0, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vmalle1_write }, |
| { .name = "TLBI_VAE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 1, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae1_write }, |
| { .name = "TLBI_ASIDE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 2, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vmalle1_write }, |
| { .name = "TLBI_VAAE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 3, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae1_write }, |
| { .name = "TLBI_VALE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 5, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae1_write }, |
| { .name = "TLBI_VAALE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 7, |
| .access = PL1_W, .accessfn = access_ttlb, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae1_write }, |
| { .name = "TLBI_IPAS2E1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 1, |
| .access = PL2_W, .type = ARM_CP_NOP }, |
| { .name = "TLBI_IPAS2LE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 5, |
| .access = PL2_W, .type = ARM_CP_NOP }, |
| { .name = "TLBI_ALLE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 4, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle1is_write }, |
| { .name = "TLBI_VMALLS12E1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 6, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle1is_write }, |
| { .name = "TLBI_IPAS2E1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 1, |
| .access = PL2_W, .type = ARM_CP_NOP }, |
| { .name = "TLBI_IPAS2LE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 5, |
| .access = PL2_W, .type = ARM_CP_NOP }, |
| { .name = "TLBI_ALLE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 4, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle1_write }, |
| { .name = "TLBI_VMALLS12E1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 6, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle1is_write }, |
| #ifndef CONFIG_USER_ONLY |
| /* 64 bit address translation operations */ |
| { .name = "AT_S1E1R", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 0, |
| .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write64 }, |
| { .name = "AT_S1E1W", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 1, |
| .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write64 }, |
| { .name = "AT_S1E0R", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 2, |
| .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write64 }, |
| { .name = "AT_S1E0W", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 8, .opc2 = 3, |
| .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write64 }, |
| { .name = "AT_S12E1R", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 4, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write64 }, |
| { .name = "AT_S12E1W", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 5, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write64 }, |
| { .name = "AT_S12E0R", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 6, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write64 }, |
| { .name = "AT_S12E0W", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 7, |
| .access = PL2_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write64 }, |
| /* AT S1E2* are elsewhere as they UNDEF from EL3 if EL2 is not present */ |
| { .name = "AT_S1E3R", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 7, .crm = 8, .opc2 = 0, |
| .access = PL3_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write64 }, |
| { .name = "AT_S1E3W", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 7, .crm = 8, .opc2 = 1, |
| .access = PL3_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write64 }, |
| { .name = "PAR_EL1", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 0, .crn = 7, .crm = 4, .opc2 = 0, |
| .access = PL1_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.par_el[1]), |
| .writefn = par_write }, |
| #endif |
| /* TLB invalidate last level of translation table walk */ |
| { .name = "TLBIMVALIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 5, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbimva_is_write }, |
| { .name = "TLBIMVAALIS", .cp = 15, .opc1 = 0, .crn = 8, .crm = 3, .opc2 = 7, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbimvaa_is_write }, |
| { .name = "TLBIMVAL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 5, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbimva_write }, |
| { .name = "TLBIMVAAL", .cp = 15, .opc1 = 0, .crn = 8, .crm = 7, .opc2 = 7, |
| .type = ARM_CP_NO_RAW, .access = PL1_W, .accessfn = access_ttlb, |
| .writefn = tlbimvaa_write }, |
| { .name = "TLBIMVALH", .cp = 15, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 5, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbimva_hyp_write }, |
| { .name = "TLBIMVALHIS", |
| .cp = 15, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 5, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbimva_hyp_is_write }, |
| { .name = "TLBIIPAS2", |
| .cp = 15, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 1, |
| .type = ARM_CP_NOP, .access = PL2_W }, |
| { .name = "TLBIIPAS2IS", |
| .cp = 15, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 1, |
| .type = ARM_CP_NOP, .access = PL2_W }, |
| { .name = "TLBIIPAS2L", |
| .cp = 15, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 5, |
| .type = ARM_CP_NOP, .access = PL2_W }, |
| { .name = "TLBIIPAS2LIS", |
| .cp = 15, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 5, |
| .type = ARM_CP_NOP, .access = PL2_W }, |
| /* 32 bit cache operations */ |
| { .name = "ICIALLUIS", .cp = 15, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 0, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, |
| { .name = "BPIALLUIS", .cp = 15, .opc1 = 0, .crn = 7, .crm = 1, .opc2 = 6, |
| .type = ARM_CP_NOP, .access = PL1_W }, |
| { .name = "ICIALLU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 0, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, |
| { .name = "ICIMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 1, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, |
| { .name = "BPIALL", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 6, |
| .type = ARM_CP_NOP, .access = PL1_W }, |
| { .name = "BPIMVA", .cp = 15, .opc1 = 0, .crn = 7, .crm = 5, .opc2 = 7, |
| .type = ARM_CP_NOP, .access = PL1_W }, |
| { .name = "DCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 1, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 2, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, |
| { .name = "DCCMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 1, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DCCSW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 2, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, |
| { .name = "DCCMVAU", .cp = 15, .opc1 = 0, .crn = 7, .crm = 11, .opc2 = 1, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_pou_access }, |
| { .name = "DCCIMVAC", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 1, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DCCISW", .cp = 15, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 2, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, |
| /* MMU Domain access control / MPU write buffer control */ |
| { .name = "DACR", .cp = 15, .opc1 = 0, .crn = 3, .crm = 0, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, .resetvalue = 0, |
| .writefn = dacr_write, .raw_writefn = raw_write, |
| .bank_fieldoffsets = { offsetoflow32(CPUARMState, cp15.dacr_s), |
| offsetoflow32(CPUARMState, cp15.dacr_ns) } }, |
| { .name = "ELR_EL1", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 0, .crn = 4, .crm = 0, .opc2 = 1, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, elr_el[1]) }, |
| { .name = "SPSR_EL1", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 0, .crn = 4, .crm = 0, .opc2 = 0, |
| .access = PL1_RW, |
| .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_SVC]) }, |
| /* We rely on the access checks not allowing the guest to write to the |
| * state field when SPSel indicates that it's being used as the stack |
| * pointer. |
| */ |
| { .name = "SP_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 4, .crm = 1, .opc2 = 0, |
| .access = PL1_RW, .accessfn = sp_el0_access, |
| .type = ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, sp_el[0]) }, |
| { .name = "SP_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 1, .opc2 = 0, |
| .access = PL2_RW, .type = ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, sp_el[1]) }, |
| { .name = "SPSel", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 4, .crm = 2, .opc2 = 0, |
| .type = ARM_CP_NO_RAW, |
| .access = PL1_RW, .readfn = spsel_read, .writefn = spsel_write }, |
| { .name = "FPEXC32_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 3, .opc2 = 0, |
| .type = ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, vfp.xregs[ARM_VFP_FPEXC]), |
| .access = PL2_RW, .accessfn = fpexc32_access }, |
| { .name = "DACR32_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 3, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, .resetvalue = 0, |
| .writefn = dacr_write, .raw_writefn = raw_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.dacr32_el2) }, |
| { .name = "IFSR32_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 0, .opc2 = 1, |
| .access = PL2_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.ifsr32_el2) }, |
| { .name = "SPSR_IRQ", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 0, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_IRQ]) }, |
| { .name = "SPSR_ABT", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 1, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_ABT]) }, |
| { .name = "SPSR_UND", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 2, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_UND]) }, |
| { .name = "SPSR_FIQ", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 3, .opc2 = 3, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_FIQ]) }, |
| { .name = "MDCR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 3, .opc2 = 1, |
| .resetvalue = 0, |
| .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.mdcr_el3) }, |
| { .name = "SDCR", .type = ARM_CP_ALIAS, |
| .cp = 15, .opc1 = 0, .crn = 1, .crm = 3, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_trap_aa32s_el1, |
| .writefn = sdcr_write, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.mdcr_el3) }, |
| REGINFO_SENTINEL |
| }; |
| |
| /* Used to describe the behaviour of EL2 regs when EL2 does not exist. */ |
| static const ARMCPRegInfo el3_no_el2_cp_reginfo[] = { |
| { .name = "VBAR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, |
| .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore }, |
| { .name = "HCR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0, |
| .access = PL2_RW, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "HACR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 7, |
| .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "ESR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 2, .opc2 = 0, |
| .access = PL2_RW, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "CPTR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 2, |
| .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "MAIR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 0, |
| .access = PL2_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "HMAIR1", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 1, |
| .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "AMAIR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 0, |
| .access = PL2_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "HAMAIR1", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 1, |
| .access = PL2_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "AFSR0_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 0, |
| .access = PL2_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "AFSR1_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 1, |
| .access = PL2_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "TCR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 2, |
| .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "VTCR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 2, |
| .access = PL2_RW, .accessfn = access_el3_aa32ns, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "VTTBR", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 6, .crm = 2, |
| .access = PL2_RW, .accessfn = access_el3_aa32ns, |
| .type = ARM_CP_CONST | ARM_CP_64BIT, .resetvalue = 0 }, |
| { .name = "VTTBR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 0, |
| .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "SCTLR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "TPIDR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 2, |
| .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "TTBR0_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "HTTBR", .cp = 15, .opc1 = 4, .crm = 2, |
| .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "CNTHCTL_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 1, .opc2 = 0, |
| .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "CNTVOFF_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 0, .opc2 = 3, |
| .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "CNTVOFF", .cp = 15, .opc1 = 4, .crm = 14, |
| .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "CNTHP_CVAL_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 2, |
| .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "CNTHP_CVAL", .cp = 15, .opc1 = 6, .crm = 14, |
| .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "CNTHP_TVAL_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 0, |
| .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "CNTHP_CTL_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 1, |
| .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "MDCR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 1, |
| .access = PL2_RW, .accessfn = access_tda, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "HPFAR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 4, |
| .access = PL2_RW, .accessfn = access_el3_aa32ns, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "HSTR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 3, |
| .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "FAR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "HIFAR", .state = ARM_CP_STATE_AA32, |
| .type = ARM_CP_CONST, |
| .cp = 15, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 2, |
| .access = PL2_RW, .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| |
| /* Ditto, but for registers which exist in ARMv8 but not v7 */ |
| static const ARMCPRegInfo el3_no_el2_v8_cp_reginfo[] = { |
| { .name = "HCR2", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 4, |
| .access = PL2_RW, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| |
| static void do_hcr_write(CPUARMState *env, uint64_t value, uint64_t valid_mask) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| valid_mask |= MAKE_64BIT_MASK(0, 34); /* ARMv8.0 */ |
| } else { |
| valid_mask |= MAKE_64BIT_MASK(0, 28); /* ARMv7VE */ |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_EL3)) { |
| valid_mask &= ~HCR_HCD; |
| } else if (cpu->psci_conduit != QEMU_PSCI_CONDUIT_SMC) { |
| /* Architecturally HCR.TSC is RES0 if EL3 is not implemented. |
| * However, if we're using the SMC PSCI conduit then QEMU is |
| * effectively acting like EL3 firmware and so the guest at |
| * EL2 should retain the ability to prevent EL1 from being |
| * able to make SMC calls into the ersatz firmware, so in |
| * that case HCR.TSC should be read/write. |
| */ |
| valid_mask &= ~HCR_TSC; |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_AARCH64)) { |
| if (cpu_isar_feature(aa64_vh, cpu)) { |
| valid_mask |= HCR_E2H; |
| } |
| if (cpu_isar_feature(aa64_lor, cpu)) { |
| valid_mask |= HCR_TLOR; |
| } |
| if (cpu_isar_feature(aa64_pauth, cpu)) { |
| valid_mask |= HCR_API | HCR_APK; |
| } |
| if (cpu_isar_feature(aa64_mte, cpu)) { |
| valid_mask |= HCR_ATA | HCR_DCT | HCR_TID5; |
| } |
| } |
| |
| /* Clear RES0 bits. */ |
| value &= valid_mask; |
| |
| /* |
| * These bits change the MMU setup: |
| * HCR_VM enables stage 2 translation |
| * HCR_PTW forbids certain page-table setups |
| * HCR_DC disables stage1 and enables stage2 translation |
| * HCR_DCT enables tagging on (disabled) stage1 translation |
| */ |
| if ((env->cp15.hcr_el2 ^ value) & (HCR_VM | HCR_PTW | HCR_DC | HCR_DCT)) { |
| tlb_flush(CPU(cpu)); |
| } |
| env->cp15.hcr_el2 = value; |
| |
| /* |
| * Updates to VI and VF require us to update the status of |
| * virtual interrupts, which are the logical OR of these bits |
| * and the state of the input lines from the GIC. (This requires |
| * that we have the iothread lock, which is done by marking the |
| * reginfo structs as ARM_CP_IO.) |
| * Note that if a write to HCR pends a VIRQ or VFIQ it is never |
| * possible for it to be taken immediately, because VIRQ and |
| * VFIQ are masked unless running at EL0 or EL1, and HCR |
| * can only be written at EL2. |
| */ |
| g_assert(qemu_mutex_iothread_locked()); |
| arm_cpu_update_virq(cpu); |
| arm_cpu_update_vfiq(cpu); |
| } |
| |
| static void hcr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t value) |
| { |
| do_hcr_write(env, value, 0); |
| } |
| |
| static void hcr_writehigh(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Handle HCR2 write, i.e. write to high half of HCR_EL2 */ |
| value = deposit64(env->cp15.hcr_el2, 32, 32, value); |
| do_hcr_write(env, value, MAKE_64BIT_MASK(0, 32)); |
| } |
| |
| static void hcr_writelow(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Handle HCR write, i.e. write to low half of HCR_EL2 */ |
| value = deposit64(env->cp15.hcr_el2, 0, 32, value); |
| do_hcr_write(env, value, MAKE_64BIT_MASK(32, 32)); |
| } |
| |
| /* |
| * Return the effective value of HCR_EL2. |
| * Bits that are not included here: |
| * RW (read from SCR_EL3.RW as needed) |
| */ |
| uint64_t arm_hcr_el2_eff(CPUARMState *env) |
| { |
| uint64_t ret = env->cp15.hcr_el2; |
| |
| if (!arm_is_el2_enabled(env)) { |
| /* |
| * "This register has no effect if EL2 is not enabled in the |
| * current Security state". This is ARMv8.4-SecEL2 speak for |
| * !(SCR_EL3.NS==1 || SCR_EL3.EEL2==1). |
| * |
| * Prior to that, the language was "In an implementation that |
| * includes EL3, when the value of SCR_EL3.NS is 0 the PE behaves |
| * as if this field is 0 for all purposes other than a direct |
| * read or write access of HCR_EL2". With lots of enumeration |
| * on a per-field basis. In current QEMU, this is condition |
| * is arm_is_secure_below_el3. |
| * |
| * Since the v8.4 language applies to the entire register, and |
| * appears to be backward compatible, use that. |
| */ |
| return 0; |
| } |
| |
| /* |
| * For a cpu that supports both aarch64 and aarch32, we can set bits |
| * in HCR_EL2 (e.g. via EL3) that are RES0 when we enter EL2 as aa32. |
| * Ignore all of the bits in HCR+HCR2 that are not valid for aarch32. |
| */ |
| if (!arm_el_is_aa64(env, 2)) { |
| uint64_t aa32_valid; |
| |
| /* |
| * These bits are up-to-date as of ARMv8.6. |
| * For HCR, it's easiest to list just the 2 bits that are invalid. |
| * For HCR2, list those that are valid. |
| */ |
| aa32_valid = MAKE_64BIT_MASK(0, 32) & ~(HCR_RW | HCR_TDZ); |
| aa32_valid |= (HCR_CD | HCR_ID | HCR_TERR | HCR_TEA | HCR_MIOCNCE | |
| HCR_TID4 | HCR_TICAB | HCR_TOCU | HCR_TTLBIS); |
| ret &= aa32_valid; |
| } |
| |
| if (ret & HCR_TGE) { |
| /* These bits are up-to-date as of ARMv8.6. */ |
| if (ret & HCR_E2H) { |
| ret &= ~(HCR_VM | HCR_FMO | HCR_IMO | HCR_AMO | |
| HCR_BSU_MASK | HCR_DC | HCR_TWI | HCR_TWE | |
| HCR_TID0 | HCR_TID2 | HCR_TPCP | HCR_TPU | |
| HCR_TDZ | HCR_CD | HCR_ID | HCR_MIOCNCE | |
| HCR_TID4 | HCR_TICAB | HCR_TOCU | HCR_ENSCXT | |
| HCR_TTLBIS | HCR_TTLBOS | HCR_TID5); |
| } else { |
| ret |= HCR_FMO | HCR_IMO | HCR_AMO; |
| } |
| ret &= ~(HCR_SWIO | HCR_PTW | HCR_VF | HCR_VI | HCR_VSE | |
| HCR_FB | HCR_TID1 | HCR_TID3 | HCR_TSC | HCR_TACR | |
| HCR_TSW | HCR_TTLB | HCR_TVM | HCR_HCD | HCR_TRVM | |
| HCR_TLOR); |
| } |
| |
| return ret; |
| } |
| |
| static void cptr_el2_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* |
| * For A-profile AArch32 EL3, if NSACR.CP10 |
| * is 0 then HCPTR.{TCP11,TCP10} ignore writes and read as 1. |
| */ |
| if (arm_feature(env, ARM_FEATURE_EL3) && !arm_el_is_aa64(env, 3) && |
| !arm_is_secure(env) && !extract32(env->cp15.nsacr, 10, 1)) { |
| value &= ~(0x3 << 10); |
| value |= env->cp15.cptr_el[2] & (0x3 << 10); |
| } |
| env->cp15.cptr_el[2] = value; |
| } |
| |
| static uint64_t cptr_el2_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| /* |
| * For A-profile AArch32 EL3, if NSACR.CP10 |
| * is 0 then HCPTR.{TCP11,TCP10} ignore writes and read as 1. |
| */ |
| uint64_t value = env->cp15.cptr_el[2]; |
| |
| if (arm_feature(env, ARM_FEATURE_EL3) && !arm_el_is_aa64(env, 3) && |
| !arm_is_secure(env) && !extract32(env->cp15.nsacr, 10, 1)) { |
| value |= 0x3 << 10; |
| } |
| return value; |
| } |
| |
| static const ARMCPRegInfo el2_cp_reginfo[] = { |
| { .name = "HCR_EL2", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_IO, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0, |
| .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.hcr_el2), |
| .writefn = hcr_write }, |
| { .name = "HCR", .state = ARM_CP_STATE_AA32, |
| .type = ARM_CP_ALIAS | ARM_CP_IO, |
| .cp = 15, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 0, |
| .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.hcr_el2), |
| .writefn = hcr_writelow }, |
| { .name = "HACR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 7, |
| .access = PL2_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "ELR_EL2", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 0, .opc2 = 1, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, elr_el[2]) }, |
| { .name = "ESR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 2, .opc2 = 0, |
| .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.esr_el[2]) }, |
| { .name = "FAR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.far_el[2]) }, |
| { .name = "HIFAR", .state = ARM_CP_STATE_AA32, |
| .type = ARM_CP_ALIAS, |
| .cp = 15, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 2, |
| .access = PL2_RW, |
| .fieldoffset = offsetofhigh32(CPUARMState, cp15.far_el[2]) }, |
| { .name = "SPSR_EL2", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 4, .crn = 4, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_HYP]) }, |
| { .name = "VBAR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, .writefn = vbar_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.vbar_el[2]), |
| .resetvalue = 0 }, |
| { .name = "SP_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 4, .crm = 1, .opc2 = 0, |
| .access = PL3_RW, .type = ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, sp_el[2]) }, |
| { .name = "CPTR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 2, |
| .access = PL2_RW, .accessfn = cptr_access, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.cptr_el[2]), |
| .readfn = cptr_el2_read, .writefn = cptr_el2_write }, |
| { .name = "MAIR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 0, |
| .access = PL2_RW, .fieldoffset = offsetof(CPUARMState, cp15.mair_el[2]), |
| .resetvalue = 0 }, |
| { .name = "HMAIR1", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 4, .crn = 10, .crm = 2, .opc2 = 1, |
| .access = PL2_RW, .type = ARM_CP_ALIAS, |
| .fieldoffset = offsetofhigh32(CPUARMState, cp15.mair_el[2]) }, |
| { .name = "AMAIR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 0, |
| .access = PL2_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| /* HAMAIR1 is mapped to AMAIR_EL2[63:32] */ |
| { .name = "HAMAIR1", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 4, .crn = 10, .crm = 3, .opc2 = 1, |
| .access = PL2_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "AFSR0_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 0, |
| .access = PL2_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "AFSR1_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 1, .opc2 = 1, |
| .access = PL2_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "TCR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 2, |
| .access = PL2_RW, .writefn = vmsa_tcr_el12_write, |
| /* no .raw_writefn or .resetfn needed as we never use mask/base_mask */ |
| .fieldoffset = offsetof(CPUARMState, cp15.tcr_el[2]) }, |
| { .name = "VTCR", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 2, |
| .type = ARM_CP_ALIAS, |
| .access = PL2_RW, .accessfn = access_el3_aa32ns, |
| .fieldoffset = offsetof(CPUARMState, cp15.vtcr_el2) }, |
| { .name = "VTCR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 2, |
| .access = PL2_RW, |
| /* no .writefn needed as this can't cause an ASID change; |
| * no .raw_writefn or .resetfn needed as we never use mask/base_mask |
| */ |
| .fieldoffset = offsetof(CPUARMState, cp15.vtcr_el2) }, |
| { .name = "VTTBR", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 6, .crm = 2, |
| .type = ARM_CP_64BIT | ARM_CP_ALIAS, |
| .access = PL2_RW, .accessfn = access_el3_aa32ns, |
| .fieldoffset = offsetof(CPUARMState, cp15.vttbr_el2), |
| .writefn = vttbr_write }, |
| { .name = "VTTBR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 1, .opc2 = 0, |
| .access = PL2_RW, .writefn = vttbr_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.vttbr_el2) }, |
| { .name = "SCTLR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, .raw_writefn = raw_write, .writefn = sctlr_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.sctlr_el[2]) }, |
| { .name = "TPIDR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 2, |
| .access = PL2_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.tpidr_el[2]) }, |
| { .name = "TTBR0_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, .resetvalue = 0, .writefn = vmsa_tcr_ttbr_el2_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el[2]) }, |
| { .name = "HTTBR", .cp = 15, .opc1 = 4, .crm = 2, |
| .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el[2]) }, |
| { .name = "TLBIALLNSNH", |
| .cp = 15, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 4, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbiall_nsnh_write }, |
| { .name = "TLBIALLNSNHIS", |
| .cp = 15, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 4, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbiall_nsnh_is_write }, |
| { .name = "TLBIALLH", .cp = 15, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 0, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbiall_hyp_write }, |
| { .name = "TLBIALLHIS", .cp = 15, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 0, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbiall_hyp_is_write }, |
| { .name = "TLBIMVAH", .cp = 15, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 1, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbimva_hyp_write }, |
| { .name = "TLBIMVAHIS", .cp = 15, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 1, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbimva_hyp_is_write }, |
| { .name = "TLBI_ALLE2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 0, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbi_aa64_alle2_write }, |
| { .name = "TLBI_VAE2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 1, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbi_aa64_vae2_write }, |
| { .name = "TLBI_VALE2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 7, .opc2 = 5, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae2_write }, |
| { .name = "TLBI_ALLE2IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 0, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle2is_write }, |
| { .name = "TLBI_VAE2IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 1, |
| .type = ARM_CP_NO_RAW, .access = PL2_W, |
| .writefn = tlbi_aa64_vae2is_write }, |
| { .name = "TLBI_VALE2IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 3, .opc2 = 5, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae2is_write }, |
| #ifndef CONFIG_USER_ONLY |
| /* Unlike the other EL2-related AT operations, these must |
| * UNDEF from EL3 if EL2 is not implemented, which is why we |
| * define them here rather than with the rest of the AT ops. |
| */ |
| { .name = "AT_S1E2R", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 0, |
| .access = PL2_W, .accessfn = at_s1e2_access, |
| .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, .writefn = ats_write64 }, |
| { .name = "AT_S1E2W", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 1, |
| .access = PL2_W, .accessfn = at_s1e2_access, |
| .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, .writefn = ats_write64 }, |
| /* The AArch32 ATS1H* operations are CONSTRAINED UNPREDICTABLE |
| * if EL2 is not implemented; we choose to UNDEF. Behaviour at EL3 |
| * with SCR.NS == 0 outside Monitor mode is UNPREDICTABLE; we choose |
| * to behave as if SCR.NS was 1. |
| */ |
| { .name = "ATS1HR", .cp = 15, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 0, |
| .access = PL2_W, |
| .writefn = ats1h_write, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC }, |
| { .name = "ATS1HW", .cp = 15, .opc1 = 4, .crn = 7, .crm = 8, .opc2 = 1, |
| .access = PL2_W, |
| .writefn = ats1h_write, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC }, |
| { .name = "CNTHCTL_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 1, .opc2 = 0, |
| /* ARMv7 requires bit 0 and 1 to reset to 1. ARMv8 defines the |
| * reset values as IMPDEF. We choose to reset to 3 to comply with |
| * both ARMv7 and ARMv8. |
| */ |
| .access = PL2_RW, .resetvalue = 3, |
| .fieldoffset = offsetof(CPUARMState, cp15.cnthctl_el2) }, |
| { .name = "CNTVOFF_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 0, .opc2 = 3, |
| .access = PL2_RW, .type = ARM_CP_IO, .resetvalue = 0, |
| .writefn = gt_cntvoff_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.cntvoff_el2) }, |
| { .name = "CNTVOFF", .cp = 15, .opc1 = 4, .crm = 14, |
| .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_ALIAS | ARM_CP_IO, |
| .writefn = gt_cntvoff_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.cntvoff_el2) }, |
| { .name = "CNTHP_CVAL_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 2, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_HYP].cval), |
| .type = ARM_CP_IO, .access = PL2_RW, |
| .writefn = gt_hyp_cval_write, .raw_writefn = raw_write }, |
| { .name = "CNTHP_CVAL", .cp = 15, .opc1 = 6, .crm = 14, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_HYP].cval), |
| .access = PL2_RW, .type = ARM_CP_64BIT | ARM_CP_IO, |
| .writefn = gt_hyp_cval_write, .raw_writefn = raw_write }, |
| { .name = "CNTHP_TVAL_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 0, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL2_RW, |
| .resetfn = gt_hyp_timer_reset, |
| .readfn = gt_hyp_tval_read, .writefn = gt_hyp_tval_write }, |
| { .name = "CNTHP_CTL_EL2", .state = ARM_CP_STATE_BOTH, |
| .type = ARM_CP_IO, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 2, .opc2 = 1, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_HYP].ctl), |
| .resetvalue = 0, |
| .writefn = gt_hyp_ctl_write, .raw_writefn = raw_write }, |
| #endif |
| /* The only field of MDCR_EL2 that has a defined architectural reset value |
| * is MDCR_EL2.HPMN which should reset to the value of PMCR_EL0.N. |
| */ |
| { .name = "MDCR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 1, |
| .access = PL2_RW, .resetvalue = PMCR_NUM_COUNTERS, |
| .fieldoffset = offsetof(CPUARMState, cp15.mdcr_el2), }, |
| { .name = "HPFAR", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 4, |
| .access = PL2_RW, .accessfn = access_el3_aa32ns, |
| .fieldoffset = offsetof(CPUARMState, cp15.hpfar_el2) }, |
| { .name = "HPFAR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 6, .crm = 0, .opc2 = 4, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.hpfar_el2) }, |
| { .name = "HSTR_EL2", .state = ARM_CP_STATE_BOTH, |
| .cp = 15, .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 3, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.hstr_el2) }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo el2_v8_cp_reginfo[] = { |
| { .name = "HCR2", .state = ARM_CP_STATE_AA32, |
| .type = ARM_CP_ALIAS | ARM_CP_IO, |
| .cp = 15, .opc1 = 4, .crn = 1, .crm = 1, .opc2 = 4, |
| .access = PL2_RW, |
| .fieldoffset = offsetofhigh32(CPUARMState, cp15.hcr_el2), |
| .writefn = hcr_writehigh }, |
| REGINFO_SENTINEL |
| }; |
| |
| static CPAccessResult sel2_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 3 || arm_is_secure_below_el3(env)) { |
| return CP_ACCESS_OK; |
| } |
| return CP_ACCESS_TRAP_UNCATEGORIZED; |
| } |
| |
| static const ARMCPRegInfo el2_sec_cp_reginfo[] = { |
| { .name = "VSTTBR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 6, .opc2 = 0, |
| .access = PL2_RW, .accessfn = sel2_access, |
| .fieldoffset = offsetof(CPUARMState, cp15.vsttbr_el2) }, |
| { .name = "VSTCR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 6, .opc2 = 2, |
| .access = PL2_RW, .accessfn = sel2_access, |
| .fieldoffset = offsetof(CPUARMState, cp15.vstcr_el2) }, |
| REGINFO_SENTINEL |
| }; |
| |
| static CPAccessResult nsacr_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| /* The NSACR is RW at EL3, and RO for NS EL1 and NS EL2. |
| * At Secure EL1 it traps to EL3 or EL2. |
| */ |
| if (arm_current_el(env) == 3) { |
| return CP_ACCESS_OK; |
| } |
| if (arm_is_secure_below_el3(env)) { |
| if (env->cp15.scr_el3 & SCR_EEL2) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| return CP_ACCESS_TRAP_EL3; |
| } |
| /* Accesses from EL1 NS and EL2 NS are UNDEF for write but allow reads. */ |
| if (isread) { |
| return CP_ACCESS_OK; |
| } |
| return CP_ACCESS_TRAP_UNCATEGORIZED; |
| } |
| |
| static const ARMCPRegInfo el3_cp_reginfo[] = { |
| { .name = "SCR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 0, |
| .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.scr_el3), |
| .resetfn = scr_reset, .writefn = scr_write }, |
| { .name = "SCR", .type = ARM_CP_ALIAS | ARM_CP_NEWEL, |
| .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_trap_aa32s_el1, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.scr_el3), |
| .writefn = scr_write }, |
| { .name = "SDER32_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 1, |
| .access = PL3_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.sder) }, |
| { .name = "SDER", |
| .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 1, |
| .access = PL3_RW, .resetvalue = 0, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.sder) }, |
| { .name = "MVBAR", .cp = 15, .opc1 = 0, .crn = 12, .crm = 0, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_trap_aa32s_el1, |
| .writefn = vbar_write, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.mvbar) }, |
| { .name = "TTBR0_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 2, .crm = 0, .opc2 = 0, |
| .access = PL3_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el[3]) }, |
| { .name = "TCR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 2, .crm = 0, .opc2 = 2, |
| .access = PL3_RW, |
| /* no .writefn needed as this can't cause an ASID change; |
| * we must provide a .raw_writefn and .resetfn because we handle |
| * reset and migration for the AArch32 TTBCR(S), which might be |
| * using mask and base_mask. |
| */ |
| .resetfn = vmsa_ttbcr_reset, .raw_writefn = vmsa_ttbcr_raw_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.tcr_el[3]) }, |
| { .name = "ELR_EL3", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 6, .crn = 4, .crm = 0, .opc2 = 1, |
| .access = PL3_RW, |
| .fieldoffset = offsetof(CPUARMState, elr_el[3]) }, |
| { .name = "ESR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 5, .crm = 2, .opc2 = 0, |
| .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.esr_el[3]) }, |
| { .name = "FAR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 6, .crm = 0, .opc2 = 0, |
| .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.far_el[3]) }, |
| { .name = "SPSR_EL3", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_ALIAS, |
| .opc0 = 3, .opc1 = 6, .crn = 4, .crm = 0, .opc2 = 0, |
| .access = PL3_RW, |
| .fieldoffset = offsetof(CPUARMState, banked_spsr[BANK_MON]) }, |
| { .name = "VBAR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 12, .crm = 0, .opc2 = 0, |
| .access = PL3_RW, .writefn = vbar_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.vbar_el[3]), |
| .resetvalue = 0 }, |
| { .name = "CPTR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 2, |
| .access = PL3_RW, .accessfn = cptr_access, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.cptr_el[3]) }, |
| { .name = "TPIDR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 13, .crm = 0, .opc2 = 2, |
| .access = PL3_RW, .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.tpidr_el[3]) }, |
| { .name = "AMAIR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 10, .crm = 3, .opc2 = 0, |
| .access = PL3_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "AFSR0_EL3", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 6, .crn = 5, .crm = 1, .opc2 = 0, |
| .access = PL3_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "AFSR1_EL3", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 6, .crn = 5, .crm = 1, .opc2 = 1, |
| .access = PL3_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "TLBI_ALLE3IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 3, .opc2 = 0, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle3is_write }, |
| { .name = "TLBI_VAE3IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 3, .opc2 = 1, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae3is_write }, |
| { .name = "TLBI_VALE3IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 3, .opc2 = 5, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae3is_write }, |
| { .name = "TLBI_ALLE3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 7, .opc2 = 0, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle3_write }, |
| { .name = "TLBI_VAE3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 7, .opc2 = 1, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae3_write }, |
| { .name = "TLBI_VALE3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 7, .opc2 = 5, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae3_write }, |
| REGINFO_SENTINEL |
| }; |
| |
| #ifndef CONFIG_USER_ONLY |
| /* Test if system register redirection is to occur in the current state. */ |
| static bool redirect_for_e2h(CPUARMState *env) |
| { |
| return arm_current_el(env) == 2 && (arm_hcr_el2_eff(env) & HCR_E2H); |
| } |
| |
| static uint64_t el2_e2h_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| CPReadFn *readfn; |
| |
| if (redirect_for_e2h(env)) { |
| /* Switch to the saved EL2 version of the register. */ |
| ri = ri->opaque; |
| readfn = ri->readfn; |
| } else { |
| readfn = ri->orig_readfn; |
| } |
| if (readfn == NULL) { |
| readfn = raw_read; |
| } |
| return readfn(env, ri); |
| } |
| |
| static void el2_e2h_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| CPWriteFn *writefn; |
| |
| if (redirect_for_e2h(env)) { |
| /* Switch to the saved EL2 version of the register. */ |
| ri = ri->opaque; |
| writefn = ri->writefn; |
| } else { |
| writefn = ri->orig_writefn; |
| } |
| if (writefn == NULL) { |
| writefn = raw_write; |
| } |
| writefn(env, ri, value); |
| } |
| |
| static void define_arm_vh_e2h_redirects_aliases(ARMCPU *cpu) |
| { |
| struct E2HAlias { |
| uint32_t src_key, dst_key, new_key; |
| const char *src_name, *dst_name, *new_name; |
| bool (*feature)(const ARMISARegisters *id); |
| }; |
| |
| #define K(op0, op1, crn, crm, op2) \ |
| ENCODE_AA64_CP_REG(CP_REG_ARM64_SYSREG_CP, crn, crm, op0, op1, op2) |
| |
| static const struct E2HAlias aliases[] = { |
| { K(3, 0, 1, 0, 0), K(3, 4, 1, 0, 0), K(3, 5, 1, 0, 0), |
| "SCTLR", "SCTLR_EL2", "SCTLR_EL12" }, |
| { K(3, 0, 1, 0, 2), K(3, 4, 1, 1, 2), K(3, 5, 1, 0, 2), |
| "CPACR", "CPTR_EL2", "CPACR_EL12" }, |
| { K(3, 0, 2, 0, 0), K(3, 4, 2, 0, 0), K(3, 5, 2, 0, 0), |
| "TTBR0_EL1", "TTBR0_EL2", "TTBR0_EL12" }, |
| { K(3, 0, 2, 0, 1), K(3, 4, 2, 0, 1), K(3, 5, 2, 0, 1), |
| "TTBR1_EL1", "TTBR1_EL2", "TTBR1_EL12" }, |
| { K(3, 0, 2, 0, 2), K(3, 4, 2, 0, 2), K(3, 5, 2, 0, 2), |
| "TCR_EL1", "TCR_EL2", "TCR_EL12" }, |
| { K(3, 0, 4, 0, 0), K(3, 4, 4, 0, 0), K(3, 5, 4, 0, 0), |
| "SPSR_EL1", "SPSR_EL2", "SPSR_EL12" }, |
| { K(3, 0, 4, 0, 1), K(3, 4, 4, 0, 1), K(3, 5, 4, 0, 1), |
| "ELR_EL1", "ELR_EL2", "ELR_EL12" }, |
| { K(3, 0, 5, 1, 0), K(3, 4, 5, 1, 0), K(3, 5, 5, 1, 0), |
| "AFSR0_EL1", "AFSR0_EL2", "AFSR0_EL12" }, |
| { K(3, 0, 5, 1, 1), K(3, 4, 5, 1, 1), K(3, 5, 5, 1, 1), |
| "AFSR1_EL1", "AFSR1_EL2", "AFSR1_EL12" }, |
| { K(3, 0, 5, 2, 0), K(3, 4, 5, 2, 0), K(3, 5, 5, 2, 0), |
| "ESR_EL1", "ESR_EL2", "ESR_EL12" }, |
| { K(3, 0, 6, 0, 0), K(3, 4, 6, 0, 0), K(3, 5, 6, 0, 0), |
| "FAR_EL1", "FAR_EL2", "FAR_EL12" }, |
| { K(3, 0, 10, 2, 0), K(3, 4, 10, 2, 0), K(3, 5, 10, 2, 0), |
| "MAIR_EL1", "MAIR_EL2", "MAIR_EL12" }, |
| { K(3, 0, 10, 3, 0), K(3, 4, 10, 3, 0), K(3, 5, 10, 3, 0), |
| "AMAIR0", "AMAIR_EL2", "AMAIR_EL12" }, |
| { K(3, 0, 12, 0, 0), K(3, 4, 12, 0, 0), K(3, 5, 12, 0, 0), |
| "VBAR", "VBAR_EL2", "VBAR_EL12" }, |
| { K(3, 0, 13, 0, 1), K(3, 4, 13, 0, 1), K(3, 5, 13, 0, 1), |
| "CONTEXTIDR_EL1", "CONTEXTIDR_EL2", "CONTEXTIDR_EL12" }, |
| { K(3, 0, 14, 1, 0), K(3, 4, 14, 1, 0), K(3, 5, 14, 1, 0), |
| "CNTKCTL", "CNTHCTL_EL2", "CNTKCTL_EL12" }, |
| |
| /* |
| * Note that redirection of ZCR is mentioned in the description |
| * of ZCR_EL2, and aliasing in the description of ZCR_EL1, but |
| * not in the summary table. |
| */ |
| { K(3, 0, 1, 2, 0), K(3, 4, 1, 2, 0), K(3, 5, 1, 2, 0), |
| "ZCR_EL1", "ZCR_EL2", "ZCR_EL12", isar_feature_aa64_sve }, |
| |
| { K(3, 0, 5, 6, 0), K(3, 4, 5, 6, 0), K(3, 5, 5, 6, 0), |
| "TFSR_EL1", "TFSR_EL2", "TFSR_EL12", isar_feature_aa64_mte }, |
| |
| /* TODO: ARMv8.2-SPE -- PMSCR_EL2 */ |
| /* TODO: ARMv8.4-Trace -- TRFCR_EL2 */ |
| }; |
| #undef K |
| |
| size_t i; |
| |
| for (i = 0; i < ARRAY_SIZE(aliases); i++) { |
| const struct E2HAlias *a = &aliases[i]; |
| ARMCPRegInfo *src_reg, *dst_reg; |
| |
| if (a->feature && !a->feature(&cpu->isar)) { |
| continue; |
| } |
| |
| src_reg = g_hash_table_lookup(cpu->cp_regs, &a->src_key); |
| dst_reg = g_hash_table_lookup(cpu->cp_regs, &a->dst_key); |
| g_assert(src_reg != NULL); |
| g_assert(dst_reg != NULL); |
| |
| /* Cross-compare names to detect typos in the keys. */ |
| g_assert(strcmp(src_reg->name, a->src_name) == 0); |
| g_assert(strcmp(dst_reg->name, a->dst_name) == 0); |
| |
| /* None of the core system registers use opaque; we will. */ |
| g_assert(src_reg->opaque == NULL); |
| |
| /* Create alias before redirection so we dup the right data. */ |
| if (a->new_key) { |
| ARMCPRegInfo *new_reg = g_memdup(src_reg, sizeof(ARMCPRegInfo)); |
| uint32_t *new_key = g_memdup(&a->new_key, sizeof(uint32_t)); |
| bool ok; |
| |
| new_reg->name = a->new_name; |
| new_reg->type |= ARM_CP_ALIAS; |
| /* Remove PL1/PL0 access, leaving PL2/PL3 R/W in place. */ |
| new_reg->access &= PL2_RW | PL3_RW; |
| |
| ok = g_hash_table_insert(cpu->cp_regs, new_key, new_reg); |
| g_assert(ok); |
| } |
| |
| src_reg->opaque = dst_reg; |
| src_reg->orig_readfn = src_reg->readfn ?: raw_read; |
| src_reg->orig_writefn = src_reg->writefn ?: raw_write; |
| if (!src_reg->raw_readfn) { |
| src_reg->raw_readfn = raw_read; |
| } |
| if (!src_reg->raw_writefn) { |
| src_reg->raw_writefn = raw_write; |
| } |
| src_reg->readfn = el2_e2h_read; |
| src_reg->writefn = el2_e2h_write; |
| } |
| } |
| #endif |
| |
| static CPAccessResult ctr_el0_access(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| int cur_el = arm_current_el(env); |
| |
| if (cur_el < 2) { |
| uint64_t hcr = arm_hcr_el2_eff(env); |
| |
| if (cur_el == 0) { |
| if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { |
| if (!(env->cp15.sctlr_el[2] & SCTLR_UCT)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } else { |
| if (!(env->cp15.sctlr_el[1] & SCTLR_UCT)) { |
| return CP_ACCESS_TRAP; |
| } |
| if (hcr & HCR_TID2) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } |
| } else if (hcr & HCR_TID2) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } |
| |
| if (arm_current_el(env) < 2 && arm_hcr_el2_eff(env) & HCR_TID2) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static void oslar_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Writes to OSLAR_EL1 may update the OS lock status, which can be |
| * read via a bit in OSLSR_EL1. |
| */ |
| int oslock; |
| |
| if (ri->state == ARM_CP_STATE_AA32) { |
| oslock = (value == 0xC5ACCE55); |
| } else { |
| oslock = value & 1; |
| } |
| |
| env->cp15.oslsr_el1 = deposit32(env->cp15.oslsr_el1, 1, 1, oslock); |
| } |
| |
| static const ARMCPRegInfo debug_cp_reginfo[] = { |
| /* DBGDRAR, DBGDSAR: always RAZ since we don't implement memory mapped |
| * debug components. The AArch64 version of DBGDRAR is named MDRAR_EL1; |
| * unlike DBGDRAR it is never accessible from EL0. |
| * DBGDSAR is deprecated and must RAZ from v8 anyway, so it has no AArch64 |
| * accessor. |
| */ |
| { .name = "DBGDRAR", .cp = 14, .crn = 1, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL0_R, .accessfn = access_tdra, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "MDRAR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 2, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 0, |
| .access = PL1_R, .accessfn = access_tdra, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "DBGDSAR", .cp = 14, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL0_R, .accessfn = access_tdra, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| /* Monitor debug system control register; the 32-bit alias is DBGDSCRext. */ |
| { .name = "MDSCR_EL1", .state = ARM_CP_STATE_BOTH, |
| .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 2, |
| .access = PL1_RW, .accessfn = access_tda, |
| .fieldoffset = offsetof(CPUARMState, cp15.mdscr_el1), |
| .resetvalue = 0 }, |
| /* |
| * MDCCSR_EL0[30:29] map to EDSCR[30:29]. Simply RAZ as the external |
| * Debug Communication Channel is not implemented. |
| */ |
| { .name = "MDCCSR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 2, .opc1 = 3, .crn = 0, .crm = 1, .opc2 = 0, |
| .access = PL0_R, .accessfn = access_tda, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| /* |
| * DBGDSCRint[15,12,5:2] map to MDSCR_EL1[15,12,5:2]. Map all bits as |
| * it is unlikely a guest will care. |
| * We don't implement the configurable EL0 access. |
| */ |
| { .name = "DBGDSCRint", .state = ARM_CP_STATE_AA32, |
| .cp = 14, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 0, |
| .type = ARM_CP_ALIAS, |
| .access = PL1_R, .accessfn = access_tda, |
| .fieldoffset = offsetof(CPUARMState, cp15.mdscr_el1), }, |
| { .name = "OSLAR_EL1", .state = ARM_CP_STATE_BOTH, |
| .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 4, |
| .access = PL1_W, .type = ARM_CP_NO_RAW, |
| .accessfn = access_tdosa, |
| .writefn = oslar_write }, |
| { .name = "OSLSR_EL1", .state = ARM_CP_STATE_BOTH, |
| .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 4, |
| .access = PL1_R, .resetvalue = 10, |
| .accessfn = access_tdosa, |
| .fieldoffset = offsetof(CPUARMState, cp15.oslsr_el1) }, |
| /* Dummy OSDLR_EL1: 32-bit Linux will read this */ |
| { .name = "OSDLR_EL1", .state = ARM_CP_STATE_BOTH, |
| .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 1, .crm = 3, .opc2 = 4, |
| .access = PL1_RW, .accessfn = access_tdosa, |
| .type = ARM_CP_NOP }, |
| /* Dummy DBGVCR: Linux wants to clear this on startup, but we don't |
| * implement vector catch debug events yet. |
| */ |
| { .name = "DBGVCR", |
| .cp = 14, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tda, |
| .type = ARM_CP_NOP }, |
| /* Dummy DBGVCR32_EL2 (which is only for a 64-bit hypervisor |
| * to save and restore a 32-bit guest's DBGVCR) |
| */ |
| { .name = "DBGVCR32_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 2, .opc1 = 4, .crn = 0, .crm = 7, .opc2 = 0, |
| .access = PL2_RW, .accessfn = access_tda, |
| .type = ARM_CP_NOP }, |
| /* Dummy MDCCINT_EL1, since we don't implement the Debug Communications |
| * Channel but Linux may try to access this register. The 32-bit |
| * alias is DBGDCCINT. |
| */ |
| { .name = "MDCCINT_EL1", .state = ARM_CP_STATE_BOTH, |
| .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tda, |
| .type = ARM_CP_NOP }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo debug_lpae_cp_reginfo[] = { |
| /* 64 bit access versions of the (dummy) debug registers */ |
| { .name = "DBGDRAR", .cp = 14, .crm = 1, .opc1 = 0, |
| .access = PL0_R, .type = ARM_CP_CONST|ARM_CP_64BIT, .resetvalue = 0 }, |
| { .name = "DBGDSAR", .cp = 14, .crm = 2, .opc1 = 0, |
| .access = PL0_R, .type = ARM_CP_CONST|ARM_CP_64BIT, .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| |
| /* Return the exception level to which exceptions should be taken |
| * via SVEAccessTrap. If an exception should be routed through |
| * AArch64.AdvSIMDFPAccessTrap, return 0; fp_exception_el should |
| * take care of raising that exception. |
| * C.f. the ARM pseudocode function CheckSVEEnabled. |
| */ |
| int sve_exception_el(CPUARMState *env, int el) |
| { |
| #ifndef CONFIG_USER_ONLY |
| uint64_t hcr_el2 = arm_hcr_el2_eff(env); |
| |
| if (el <= 1 && (hcr_el2 & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) { |
| /* Check CPACR.ZEN. */ |
| switch (extract32(env->cp15.cpacr_el1, 16, 2)) { |
| case 1: |
| if (el != 0) { |
| break; |
| } |
| /* fall through */ |
| case 0: |
| case 2: |
| /* route_to_el2 */ |
| return hcr_el2 & HCR_TGE ? 2 : 1; |
| } |
| |
| /* Check CPACR.FPEN. */ |
| switch (extract32(env->cp15.cpacr_el1, 20, 2)) { |
| case 1: |
| if (el != 0) { |
| break; |
| } |
| /* fall through */ |
| case 0: |
| case 2: |
| return 0; |
| } |
| } |
| |
| /* |
| * CPTR_EL2 changes format with HCR_EL2.E2H (regardless of TGE). |
| */ |
| if (el <= 2) { |
| if (hcr_el2 & HCR_E2H) { |
| /* Check CPTR_EL2.ZEN. */ |
| switch (extract32(env->cp15.cptr_el[2], 16, 2)) { |
| case 1: |
| if (el != 0 || !(hcr_el2 & HCR_TGE)) { |
| break; |
| } |
| /* fall through */ |
| case 0: |
| case 2: |
| return 2; |
| } |
| |
| /* Check CPTR_EL2.FPEN. */ |
| switch (extract32(env->cp15.cptr_el[2], 20, 2)) { |
| case 1: |
| if (el == 2 || !(hcr_el2 & HCR_TGE)) { |
| break; |
| } |
| /* fall through */ |
| case 0: |
| case 2: |
| return 0; |
| } |
| } else if (arm_is_el2_enabled(env)) { |
| if (env->cp15.cptr_el[2] & CPTR_TZ) { |
| return 2; |
| } |
| if (env->cp15.cptr_el[2] & CPTR_TFP) { |
| return 0; |
| } |
| } |
| } |
| |
| /* CPTR_EL3. Since EZ is negative we must check for EL3. */ |
| if (arm_feature(env, ARM_FEATURE_EL3) |
| && !(env->cp15.cptr_el[3] & CPTR_EZ)) { |
| return 3; |
| } |
| #endif |
| return 0; |
| } |
| |
| uint32_t aarch64_sve_zcr_get_valid_len(ARMCPU *cpu, uint32_t start_len) |
| { |
| uint32_t end_len; |
| |
| start_len = MIN(start_len, ARM_MAX_VQ - 1); |
| end_len = start_len; |
| |
| if (!test_bit(start_len, cpu->sve_vq_map)) { |
| end_len = find_last_bit(cpu->sve_vq_map, start_len); |
| assert(end_len < start_len); |
| } |
| return end_len; |
| } |
| |
| /* |
| * Given that SVE is enabled, return the vector length for EL. |
| */ |
| uint32_t sve_zcr_len_for_el(CPUARMState *env, int el) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| uint32_t zcr_len = cpu->sve_max_vq - 1; |
| |
| if (el <= 1 && |
| (arm_hcr_el2_eff(env) & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) { |
| zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[1]); |
| } |
| if (el <= 2 && arm_feature(env, ARM_FEATURE_EL2)) { |
| zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[2]); |
| } |
| if (arm_feature(env, ARM_FEATURE_EL3)) { |
| zcr_len = MIN(zcr_len, 0xf & (uint32_t)env->vfp.zcr_el[3]); |
| } |
| |
| return aarch64_sve_zcr_get_valid_len(cpu, zcr_len); |
| } |
| |
| static void zcr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| int cur_el = arm_current_el(env); |
| int old_len = sve_zcr_len_for_el(env, cur_el); |
| int new_len; |
| |
| /* Bits other than [3:0] are RAZ/WI. */ |
| QEMU_BUILD_BUG_ON(ARM_MAX_VQ > 16); |
| raw_write(env, ri, value & 0xf); |
| |
| /* |
| * Because we arrived here, we know both FP and SVE are enabled; |
| * otherwise we would have trapped access to the ZCR_ELn register. |
| */ |
| new_len = sve_zcr_len_for_el(env, cur_el); |
| if (new_len < old_len) { |
| aarch64_sve_narrow_vq(env, new_len + 1); |
| } |
| } |
| |
| static const ARMCPRegInfo zcr_el1_reginfo = { |
| .name = "ZCR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 2, .opc2 = 0, |
| .access = PL1_RW, .type = ARM_CP_SVE, |
| .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[1]), |
| .writefn = zcr_write, .raw_writefn = raw_write |
| }; |
| |
| static const ARMCPRegInfo zcr_el2_reginfo = { |
| .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, |
| .access = PL2_RW, .type = ARM_CP_SVE, |
| .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[2]), |
| .writefn = zcr_write, .raw_writefn = raw_write |
| }; |
| |
| static const ARMCPRegInfo zcr_no_el2_reginfo = { |
| .name = "ZCR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 2, .opc2 = 0, |
| .access = PL2_RW, .type = ARM_CP_SVE, |
| .readfn = arm_cp_read_zero, .writefn = arm_cp_write_ignore |
| }; |
| |
| static const ARMCPRegInfo zcr_el3_reginfo = { |
| .name = "ZCR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 2, .opc2 = 0, |
| .access = PL3_RW, .type = ARM_CP_SVE, |
| .fieldoffset = offsetof(CPUARMState, vfp.zcr_el[3]), |
| .writefn = zcr_write, .raw_writefn = raw_write |
| }; |
| |
| void hw_watchpoint_update(ARMCPU *cpu, int n) |
| { |
| CPUARMState *env = &cpu->env; |
| vaddr len = 0; |
| vaddr wvr = env->cp15.dbgwvr[n]; |
| uint64_t wcr = env->cp15.dbgwcr[n]; |
| int mask; |
| int flags = BP_CPU | BP_STOP_BEFORE_ACCESS; |
| |
| if (env->cpu_watchpoint[n]) { |
| cpu_watchpoint_remove_by_ref(CPU(cpu), env->cpu_watchpoint[n]); |
| env->cpu_watchpoint[n] = NULL; |
| } |
| |
| if (!extract64(wcr, 0, 1)) { |
| /* E bit clear : watchpoint disabled */ |
| return; |
| } |
| |
| switch (extract64(wcr, 3, 2)) { |
| case 0: |
| /* LSC 00 is reserved and must behave as if the wp is disabled */ |
| return; |
| case 1: |
| flags |= BP_MEM_READ; |
| break; |
| case 2: |
| flags |= BP_MEM_WRITE; |
| break; |
| case 3: |
| flags |= BP_MEM_ACCESS; |
| break; |
| } |
| |
| /* Attempts to use both MASK and BAS fields simultaneously are |
| * CONSTRAINED UNPREDICTABLE; we opt to ignore BAS in this case, |
| * thus generating a watchpoint for every byte in the masked region. |
| */ |
| mask = extract64(wcr, 24, 4); |
| if (mask == 1 || mask == 2) { |
| /* Reserved values of MASK; we must act as if the mask value was |
| * some non-reserved value, or as if the watchpoint were disabled. |
| * We choose the latter. |
| */ |
| return; |
| } else if (mask) { |
| /* Watchpoint covers an aligned area up to 2GB in size */ |
| len = 1ULL << mask; |
| /* If masked bits in WVR are not zero it's CONSTRAINED UNPREDICTABLE |
| * whether the watchpoint fires when the unmasked bits match; we opt |
| * to generate the exceptions. |
| */ |
| wvr &= ~(len - 1); |
| } else { |
| /* Watchpoint covers bytes defined by the byte address select bits */ |
| int bas = extract64(wcr, 5, 8); |
| int basstart; |
| |
| if (extract64(wvr, 2, 1)) { |
| /* Deprecated case of an only 4-aligned address. BAS[7:4] are |
| * ignored, and BAS[3:0] define which bytes to watch. |
| */ |
| bas &= 0xf; |
| } |
| |
| if (bas == 0) { |
| /* This must act as if the watchpoint is disabled */ |
| return; |
| } |
| |
| /* The BAS bits are supposed to be programmed to indicate a contiguous |
| * range of bytes. Otherwise it is CONSTRAINED UNPREDICTABLE whether |
| * we fire for each byte in the word/doubleword addressed by the WVR. |
| * We choose to ignore any non-zero bits after the first range of 1s. |
| */ |
| basstart = ctz32(bas); |
| len = cto32(bas >> basstart); |
| wvr += basstart; |
| } |
| |
| cpu_watchpoint_insert(CPU(cpu), wvr, len, flags, |
| &env->cpu_watchpoint[n]); |
| } |
| |
| void hw_watchpoint_update_all(ARMCPU *cpu) |
| { |
| int i; |
| CPUARMState *env = &cpu->env; |
| |
| /* Completely clear out existing QEMU watchpoints and our array, to |
| * avoid possible stale entries following migration load. |
| */ |
| cpu_watchpoint_remove_all(CPU(cpu), BP_CPU); |
| memset(env->cpu_watchpoint, 0, sizeof(env->cpu_watchpoint)); |
| |
| for (i = 0; i < ARRAY_SIZE(cpu->env.cpu_watchpoint); i++) { |
| hw_watchpoint_update(cpu, i); |
| } |
| } |
| |
| static void dbgwvr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| int i = ri->crm; |
| |
| /* |
| * Bits [1:0] are RES0. |
| * |
| * It is IMPLEMENTATION DEFINED whether [63:49] ([63:53] with FEAT_LVA) |
| * are hardwired to the value of bit [48] ([52] with FEAT_LVA), or if |
| * they contain the value written. It is CONSTRAINED UNPREDICTABLE |
| * whether the RESS bits are ignored when comparing an address. |
| * |
| * Therefore we are allowed to compare the entire register, which lets |
| * us avoid considering whether or not FEAT_LVA is actually enabled. |
| */ |
| value &= ~3ULL; |
| |
| raw_write(env, ri, value); |
| hw_watchpoint_update(cpu, i); |
| } |
| |
| static void dbgwcr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| int i = ri->crm; |
| |
| raw_write(env, ri, value); |
| hw_watchpoint_update(cpu, i); |
| } |
| |
| void hw_breakpoint_update(ARMCPU *cpu, int n) |
| { |
| CPUARMState *env = &cpu->env; |
| uint64_t bvr = env->cp15.dbgbvr[n]; |
| uint64_t bcr = env->cp15.dbgbcr[n]; |
| vaddr addr; |
| int bt; |
| int flags = BP_CPU; |
| |
| if (env->cpu_breakpoint[n]) { |
| cpu_breakpoint_remove_by_ref(CPU(cpu), env->cpu_breakpoint[n]); |
| env->cpu_breakpoint[n] = NULL; |
| } |
| |
| if (!extract64(bcr, 0, 1)) { |
| /* E bit clear : watchpoint disabled */ |
| return; |
| } |
| |
| bt = extract64(bcr, 20, 4); |
| |
| switch (bt) { |
| case 4: /* unlinked address mismatch (reserved if AArch64) */ |
| case 5: /* linked address mismatch (reserved if AArch64) */ |
| qemu_log_mask(LOG_UNIMP, |
| "arm: address mismatch breakpoint types not implemented\n"); |
| return; |
| case 0: /* unlinked address match */ |
| case 1: /* linked address match */ |
| { |
| /* |
| * Bits [1:0] are RES0. |
| * |
| * It is IMPLEMENTATION DEFINED whether bits [63:49] |
| * ([63:53] for FEAT_LVA) are hardwired to a copy of the sign bit |
| * of the VA field ([48] or [52] for FEAT_LVA), or whether the |
| * value is read as written. It is CONSTRAINED UNPREDICTABLE |
| * whether the RESS bits are ignored when comparing an address. |
| * Therefore we are allowed to compare the entire register, which |
| * lets us avoid considering whether FEAT_LVA is actually enabled. |
| * |
| * The BAS field is used to allow setting breakpoints on 16-bit |
| * wide instructions; it is CONSTRAINED UNPREDICTABLE whether |
| * a bp will fire if the addresses covered by the bp and the addresses |
| * covered by the insn overlap but the insn doesn't start at the |
| * start of the bp address range. We choose to require the insn and |
| * the bp to have the same address. The constraints on writing to |
| * BAS enforced in dbgbcr_write mean we have only four cases: |
| * 0b0000 => no breakpoint |
| * 0b0011 => breakpoint on addr |
| * 0b1100 => breakpoint on addr + 2 |
| * 0b1111 => breakpoint on addr |
| * See also figure D2-3 in the v8 ARM ARM (DDI0487A.c). |
| */ |
| int bas = extract64(bcr, 5, 4); |
| addr = bvr & ~3ULL; |
| if (bas == 0) { |
| return; |
| } |
| if (bas == 0xc) { |
| addr += 2; |
| } |
| break; |
| } |
| case 2: /* unlinked context ID match */ |
| case 8: /* unlinked VMID match (reserved if no EL2) */ |
| case 10: /* unlinked context ID and VMID match (reserved if no EL2) */ |
| qemu_log_mask(LOG_UNIMP, |
| "arm: unlinked context breakpoint types not implemented\n"); |
| return; |
| case 9: /* linked VMID match (reserved if no EL2) */ |
| case 11: /* linked context ID and VMID match (reserved if no EL2) */ |
| case 3: /* linked context ID match */ |
| default: |
| /* We must generate no events for Linked context matches (unless |
| * they are linked to by some other bp/wp, which is handled in |
| * updates for the linking bp/wp). We choose to also generate no events |
| * for reserved values. |
| */ |
| return; |
| } |
| |
| cpu_breakpoint_insert(CPU(cpu), addr, flags, &env->cpu_breakpoint[n]); |
| } |
| |
| void hw_breakpoint_update_all(ARMCPU *cpu) |
| { |
| int i; |
| CPUARMState *env = &cpu->env; |
| |
| /* Completely clear out existing QEMU breakpoints and our array, to |
| * avoid possible stale entries following migration load. |
| */ |
| cpu_breakpoint_remove_all(CPU(cpu), BP_CPU); |
| memset(env->cpu_breakpoint, 0, sizeof(env->cpu_breakpoint)); |
| |
| for (i = 0; i < ARRAY_SIZE(cpu->env.cpu_breakpoint); i++) { |
| hw_breakpoint_update(cpu, i); |
| } |
| } |
| |
| static void dbgbvr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| int i = ri->crm; |
| |
| raw_write(env, ri, value); |
| hw_breakpoint_update(cpu, i); |
| } |
| |
| static void dbgbcr_write(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| int i = ri->crm; |
| |
| /* BAS[3] is a read-only copy of BAS[2], and BAS[1] a read-only |
| * copy of BAS[0]. |
| */ |
| value = deposit64(value, 6, 1, extract64(value, 5, 1)); |
| value = deposit64(value, 8, 1, extract64(value, 7, 1)); |
| |
| raw_write(env, ri, value); |
| hw_breakpoint_update(cpu, i); |
| } |
| |
| static void define_debug_regs(ARMCPU *cpu) |
| { |
| /* Define v7 and v8 architectural debug registers. |
| * These are just dummy implementations for now. |
| */ |
| int i; |
| int wrps, brps, ctx_cmps; |
| |
| /* |
| * The Arm ARM says DBGDIDR is optional and deprecated if EL1 cannot |
| * use AArch32. Given that bit 15 is RES1, if the value is 0 then |
| * the register must not exist for this cpu. |
| */ |
| if (cpu->isar.dbgdidr != 0) { |
| ARMCPRegInfo dbgdidr = { |
| .name = "DBGDIDR", .cp = 14, .crn = 0, .crm = 0, |
| .opc1 = 0, .opc2 = 0, |
| .access = PL0_R, .accessfn = access_tda, |
| .type = ARM_CP_CONST, .resetvalue = cpu->isar.dbgdidr, |
| }; |
| define_one_arm_cp_reg(cpu, &dbgdidr); |
| } |
| |
| /* Note that all these register fields hold "number of Xs minus 1". */ |
| brps = arm_num_brps(cpu); |
| wrps = arm_num_wrps(cpu); |
| ctx_cmps = arm_num_ctx_cmps(cpu); |
| |
| assert(ctx_cmps <= brps); |
| |
| define_arm_cp_regs(cpu, debug_cp_reginfo); |
| |
| if (arm_feature(&cpu->env, ARM_FEATURE_LPAE)) { |
| define_arm_cp_regs(cpu, debug_lpae_cp_reginfo); |
| } |
| |
| for (i = 0; i < brps; i++) { |
| ARMCPRegInfo dbgregs[] = { |
| { .name = "DBGBVR", .state = ARM_CP_STATE_BOTH, |
| .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = i, .opc2 = 4, |
| .access = PL1_RW, .accessfn = access_tda, |
| .fieldoffset = offsetof(CPUARMState, cp15.dbgbvr[i]), |
| .writefn = dbgbvr_write, .raw_writefn = raw_write |
| }, |
| { .name = "DBGBCR", .state = ARM_CP_STATE_BOTH, |
| .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = i, .opc2 = 5, |
| .access = PL1_RW, .accessfn = access_tda, |
| .fieldoffset = offsetof(CPUARMState, cp15.dbgbcr[i]), |
| .writefn = dbgbcr_write, .raw_writefn = raw_write |
| }, |
| REGINFO_SENTINEL |
| }; |
| define_arm_cp_regs(cpu, dbgregs); |
| } |
| |
| for (i = 0; i < wrps; i++) { |
| ARMCPRegInfo dbgregs[] = { |
| { .name = "DBGWVR", .state = ARM_CP_STATE_BOTH, |
| .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = i, .opc2 = 6, |
| .access = PL1_RW, .accessfn = access_tda, |
| .fieldoffset = offsetof(CPUARMState, cp15.dbgwvr[i]), |
| .writefn = dbgwvr_write, .raw_writefn = raw_write |
| }, |
| { .name = "DBGWCR", .state = ARM_CP_STATE_BOTH, |
| .cp = 14, .opc0 = 2, .opc1 = 0, .crn = 0, .crm = i, .opc2 = 7, |
| .access = PL1_RW, .accessfn = access_tda, |
| .fieldoffset = offsetof(CPUARMState, cp15.dbgwcr[i]), |
| .writefn = dbgwcr_write, .raw_writefn = raw_write |
| }, |
| REGINFO_SENTINEL |
| }; |
| define_arm_cp_regs(cpu, dbgregs); |
| } |
| } |
| |
| static void define_pmu_regs(ARMCPU *cpu) |
| { |
| /* |
| * v7 performance monitor control register: same implementor |
| * field as main ID register, and we implement four counters in |
| * addition to the cycle count register. |
| */ |
| unsigned int i, pmcrn = PMCR_NUM_COUNTERS; |
| ARMCPRegInfo pmcr = { |
| .name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 0, |
| .access = PL0_RW, |
| .type = ARM_CP_IO | ARM_CP_ALIAS, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmcr), |
| .accessfn = pmreg_access, .writefn = pmcr_write, |
| .raw_writefn = raw_write, |
| }; |
| ARMCPRegInfo pmcr64 = { |
| .name = "PMCR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 0, |
| .access = PL0_RW, .accessfn = pmreg_access, |
| .type = ARM_CP_IO, |
| .fieldoffset = offsetof(CPUARMState, cp15.c9_pmcr), |
| .resetvalue = (cpu->midr & 0xff000000) | (pmcrn << PMCRN_SHIFT) | |
| PMCRLC, |
| .writefn = pmcr_write, .raw_writefn = raw_write, |
| }; |
| define_one_arm_cp_reg(cpu, &pmcr); |
| define_one_arm_cp_reg(cpu, &pmcr64); |
| for (i = 0; i < pmcrn; i++) { |
| char *pmevcntr_name = g_strdup_printf("PMEVCNTR%d", i); |
| char *pmevcntr_el0_name = g_strdup_printf("PMEVCNTR%d_EL0", i); |
| char *pmevtyper_name = g_strdup_printf("PMEVTYPER%d", i); |
| char *pmevtyper_el0_name = g_strdup_printf("PMEVTYPER%d_EL0", i); |
| ARMCPRegInfo pmev_regs[] = { |
| { .name = pmevcntr_name, .cp = 15, .crn = 14, |
| .crm = 8 | (3 & (i >> 3)), .opc1 = 0, .opc2 = i & 7, |
| .access = PL0_RW, .type = ARM_CP_IO | ARM_CP_ALIAS, |
| .readfn = pmevcntr_readfn, .writefn = pmevcntr_writefn, |
| .accessfn = pmreg_access }, |
| { .name = pmevcntr_el0_name, .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 8 | (3 & (i >> 3)), |
| .opc2 = i & 7, .access = PL0_RW, .accessfn = pmreg_access, |
| .type = ARM_CP_IO, |
| .readfn = pmevcntr_readfn, .writefn = pmevcntr_writefn, |
| .raw_readfn = pmevcntr_rawread, |
| .raw_writefn = pmevcntr_rawwrite }, |
| { .name = pmevtyper_name, .cp = 15, .crn = 14, |
| .crm = 12 | (3 & (i >> 3)), .opc1 = 0, .opc2 = i & 7, |
| .access = PL0_RW, .type = ARM_CP_IO | ARM_CP_ALIAS, |
| .readfn = pmevtyper_readfn, .writefn = pmevtyper_writefn, |
| .accessfn = pmreg_access }, |
| { .name = pmevtyper_el0_name, .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 14, .crm = 12 | (3 & (i >> 3)), |
| .opc2 = i & 7, .access = PL0_RW, .accessfn = pmreg_access, |
| .type = ARM_CP_IO, |
| .readfn = pmevtyper_readfn, .writefn = pmevtyper_writefn, |
| .raw_writefn = pmevtyper_rawwrite }, |
| REGINFO_SENTINEL |
| }; |
| define_arm_cp_regs(cpu, pmev_regs); |
| g_free(pmevcntr_name); |
| g_free(pmevcntr_el0_name); |
| g_free(pmevtyper_name); |
| g_free(pmevtyper_el0_name); |
| } |
| if (cpu_isar_feature(aa32_pmu_8_1, cpu)) { |
| ARMCPRegInfo v81_pmu_regs[] = { |
| { .name = "PMCEID2", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 4, |
| .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, |
| .resetvalue = extract64(cpu->pmceid0, 32, 32) }, |
| { .name = "PMCEID3", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 5, |
| .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, |
| .resetvalue = extract64(cpu->pmceid1, 32, 32) }, |
| REGINFO_SENTINEL |
| }; |
| define_arm_cp_regs(cpu, v81_pmu_regs); |
| } |
| if (cpu_isar_feature(any_pmu_8_4, cpu)) { |
| static const ARMCPRegInfo v84_pmmir = { |
| .name = "PMMIR_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 9, .crm = 14, .opc2 = 6, |
| .access = PL1_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, |
| .resetvalue = 0 |
| }; |
| define_one_arm_cp_reg(cpu, &v84_pmmir); |
| } |
| } |
| |
| /* We don't know until after realize whether there's a GICv3 |
| * attached, and that is what registers the gicv3 sysregs. |
| * So we have to fill in the GIC fields in ID_PFR/ID_PFR1_EL1/ID_AA64PFR0_EL1 |
| * at runtime. |
| */ |
| static uint64_t id_pfr1_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| uint64_t pfr1 = cpu->isar.id_pfr1; |
| |
| if (env->gicv3state) { |
| pfr1 |= 1 << 28; |
| } |
| return pfr1; |
| } |
| |
| #ifndef CONFIG_USER_ONLY |
| static uint64_t id_aa64pfr0_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| uint64_t pfr0 = cpu->isar.id_aa64pfr0; |
| |
| if (env->gicv3state) { |
| pfr0 |= 1 << 24; |
| } |
| return pfr0; |
| } |
| #endif |
| |
| /* Shared logic between LORID and the rest of the LOR* registers. |
| * Secure state exclusion has already been dealt with. |
| */ |
| static CPAccessResult access_lor_ns(CPUARMState *env, |
| const ARMCPRegInfo *ri, bool isread) |
| { |
| int el = arm_current_el(env); |
| |
| if (el < 2 && (arm_hcr_el2_eff(env) & HCR_TLOR)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| if (el < 3 && (env->cp15.scr_el3 & SCR_TLOR)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult access_lor_other(CPUARMState *env, |
| const ARMCPRegInfo *ri, bool isread) |
| { |
| if (arm_is_secure_below_el3(env)) { |
| /* Access denied in secure mode. */ |
| return CP_ACCESS_TRAP; |
| } |
| return access_lor_ns(env, ri, isread); |
| } |
| |
| /* |
| * A trivial implementation of ARMv8.1-LOR leaves all of these |
| * registers fixed at 0, which indicates that there are zero |
| * supported Limited Ordering regions. |
| */ |
| static const ARMCPRegInfo lor_reginfo[] = { |
| { .name = "LORSA_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_lor_other, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "LOREA_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_lor_other, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "LORN_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 2, |
| .access = PL1_RW, .accessfn = access_lor_other, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "LORC_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 3, |
| .access = PL1_RW, .accessfn = access_lor_other, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "LORID_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 4, .opc2 = 7, |
| .access = PL1_R, .accessfn = access_lor_ns, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| |
| #ifdef TARGET_AARCH64 |
| static CPAccessResult access_pauth(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| int el = arm_current_el(env); |
| |
| if (el < 2 && |
| arm_feature(env, ARM_FEATURE_EL2) && |
| !(arm_hcr_el2_eff(env) & HCR_APK)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| if (el < 3 && |
| arm_feature(env, ARM_FEATURE_EL3) && |
| !(env->cp15.scr_el3 & SCR_APK)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static const ARMCPRegInfo pauth_reginfo[] = { |
| { .name = "APDAKEYLO_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fieldoffset = offsetof(CPUARMState, keys.apda.lo) }, |
| { .name = "APDAKEYHI_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fieldoffset = offsetof(CPUARMState, keys.apda.hi) }, |
| { .name = "APDBKEYLO_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 2, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fieldoffset = offsetof(CPUARMState, keys.apdb.lo) }, |
| { .name = "APDBKEYHI_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 2, .opc2 = 3, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fieldoffset = offsetof(CPUARMState, keys.apdb.hi) }, |
| { .name = "APGAKEYLO_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 3, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fieldoffset = offsetof(CPUARMState, keys.apga.lo) }, |
| { .name = "APGAKEYHI_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 3, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fieldoffset = offsetof(CPUARMState, keys.apga.hi) }, |
| { .name = "APIAKEYLO_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fieldoffset = offsetof(CPUARMState, keys.apia.lo) }, |
| { .name = "APIAKEYHI_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fieldoffset = offsetof(CPUARMState, keys.apia.hi) }, |
| { .name = "APIBKEYLO_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 2, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fieldoffset = offsetof(CPUARMState, keys.apib.lo) }, |
| { .name = "APIBKEYHI_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 2, .crm = 1, .opc2 = 3, |
| .access = PL1_RW, .accessfn = access_pauth, |
| .fieldoffset = offsetof(CPUARMState, keys.apib.hi) }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo tlbirange_reginfo[] = { |
| { .name = "TLBI_RVAE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 2, .opc2 = 1, |
| .access = PL1_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae1is_write }, |
| { .name = "TLBI_RVAAE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 2, .opc2 = 3, |
| .access = PL1_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae1is_write }, |
| { .name = "TLBI_RVALE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 2, .opc2 = 5, |
| .access = PL1_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae1is_write }, |
| { .name = "TLBI_RVAALE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 2, .opc2 = 7, |
| .access = PL1_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae1is_write }, |
| { .name = "TLBI_RVAE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 1, |
| .access = PL1_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae1is_write }, |
| { .name = "TLBI_RVAAE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 3, |
| .access = PL1_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae1is_write }, |
| { .name = "TLBI_RVALE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 5, |
| .access = PL1_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae1is_write }, |
| { .name = "TLBI_RVAALE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 5, .opc2 = 7, |
| .access = PL1_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae1is_write }, |
| { .name = "TLBI_RVAE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 1, |
| .access = PL1_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae1_write }, |
| { .name = "TLBI_RVAAE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 3, |
| .access = PL1_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae1_write }, |
| { .name = "TLBI_RVALE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 5, |
| .access = PL1_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae1_write }, |
| { .name = "TLBI_RVAALE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 6, .opc2 = 7, |
| .access = PL1_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae1_write }, |
| { .name = "TLBI_RIPAS2E1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 2, |
| .access = PL2_W, .type = ARM_CP_NOP }, |
| { .name = "TLBI_RIPAS2LE1IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 0, .opc2 = 6, |
| .access = PL2_W, .type = ARM_CP_NOP }, |
| { .name = "TLBI_RVAE2IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 2, .opc2 = 1, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae2is_write }, |
| { .name = "TLBI_RVALE2IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 2, .opc2 = 5, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae2is_write }, |
| { .name = "TLBI_RIPAS2E1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 2, |
| .access = PL2_W, .type = ARM_CP_NOP }, |
| { .name = "TLBI_RIPAS2LE1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 6, |
| .access = PL2_W, .type = ARM_CP_NOP }, |
| { .name = "TLBI_RVAE2OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 5, .opc2 = 1, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae2is_write }, |
| { .name = "TLBI_RVALE2OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 5, .opc2 = 5, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae2is_write }, |
| { .name = "TLBI_RVAE2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 6, .opc2 = 1, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae2_write }, |
| { .name = "TLBI_RVALE2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 6, .opc2 = 5, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae2_write }, |
| { .name = "TLBI_RVAE3IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 2, .opc2 = 1, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae3is_write }, |
| { .name = "TLBI_RVALE3IS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 2, .opc2 = 5, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae3is_write }, |
| { .name = "TLBI_RVAE3OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 5, .opc2 = 1, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae3is_write }, |
| { .name = "TLBI_RVALE3OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 5, .opc2 = 5, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae3is_write }, |
| { .name = "TLBI_RVAE3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 6, .opc2 = 1, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae3_write }, |
| { .name = "TLBI_RVALE3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 6, .opc2 = 5, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_rvae3_write }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo tlbios_reginfo[] = { |
| { .name = "TLBI_VMALLE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 1, .opc2 = 0, |
| .access = PL1_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vmalle1is_write }, |
| { .name = "TLBI_VAE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 1, .opc2 = 1, |
| .access = PL1_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae1is_write }, |
| { .name = "TLBI_ASIDE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 1, .opc2 = 2, |
| .access = PL1_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vmalle1is_write }, |
| { .name = "TLBI_VAAE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 1, .opc2 = 3, |
| .access = PL1_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae1is_write }, |
| { .name = "TLBI_VALE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 1, .opc2 = 5, |
| .access = PL1_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae1is_write }, |
| { .name = "TLBI_VAALE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 8, .crm = 1, .opc2 = 7, |
| .access = PL1_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae1is_write }, |
| { .name = "TLBI_ALLE2OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 0, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle2is_write }, |
| { .name = "TLBI_VAE2OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 1, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae2is_write }, |
| { .name = "TLBI_ALLE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 4, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle1is_write }, |
| { .name = "TLBI_VALE2OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 5, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae2is_write }, |
| { .name = "TLBI_VMALLS12E1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 1, .opc2 = 6, |
| .access = PL2_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle1is_write }, |
| { .name = "TLBI_IPAS2E1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 0, |
| .access = PL2_W, .type = ARM_CP_NOP }, |
| { .name = "TLBI_RIPAS2E1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 3, |
| .access = PL2_W, .type = ARM_CP_NOP }, |
| { .name = "TLBI_IPAS2LE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 4, |
| .access = PL2_W, .type = ARM_CP_NOP }, |
| { .name = "TLBI_RIPAS2LE1OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 4, .crn = 8, .crm = 4, .opc2 = 7, |
| .access = PL2_W, .type = ARM_CP_NOP }, |
| { .name = "TLBI_ALLE3OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 1, .opc2 = 0, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_alle3is_write }, |
| { .name = "TLBI_VAE3OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 1, .opc2 = 1, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae3is_write }, |
| { .name = "TLBI_VALE3OS", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 6, .crn = 8, .crm = 1, .opc2 = 5, |
| .access = PL3_W, .type = ARM_CP_NO_RAW, |
| .writefn = tlbi_aa64_vae3is_write }, |
| REGINFO_SENTINEL |
| }; |
| |
| static uint64_t rndr_readfn(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| Error *err = NULL; |
| uint64_t ret; |
| |
| /* Success sets NZCV = 0000. */ |
| env->NF = env->CF = env->VF = 0, env->ZF = 1; |
| |
| if (qemu_guest_getrandom(&ret, sizeof(ret), &err) < 0) { |
| /* |
| * ??? Failed, for unknown reasons in the crypto subsystem. |
| * The best we can do is log the reason and return the |
| * timed-out indication to the guest. There is no reason |
| * we know to expect this failure to be transitory, so the |
| * guest may well hang retrying the operation. |
| */ |
| qemu_log_mask(LOG_UNIMP, "%s: Crypto failure: %s", |
| ri->name, error_get_pretty(err)); |
| error_free(err); |
| |
| env->ZF = 0; /* NZCF = 0100 */ |
| return 0; |
| } |
| return ret; |
| } |
| |
| /* We do not support re-seeding, so the two registers operate the same. */ |
| static const ARMCPRegInfo rndr_reginfo[] = { |
| { .name = "RNDR", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END | ARM_CP_IO, |
| .opc0 = 3, .opc1 = 3, .crn = 2, .crm = 4, .opc2 = 0, |
| .access = PL0_R, .readfn = rndr_readfn }, |
| { .name = "RNDRRS", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END | ARM_CP_IO, |
| .opc0 = 3, .opc1 = 3, .crn = 2, .crm = 4, .opc2 = 1, |
| .access = PL0_R, .readfn = rndr_readfn }, |
| REGINFO_SENTINEL |
| }; |
| |
| #ifndef CONFIG_USER_ONLY |
| static void dccvap_writefn(CPUARMState *env, const ARMCPRegInfo *opaque, |
| uint64_t value) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| /* CTR_EL0 System register -> DminLine, bits [19:16] */ |
| uint64_t dline_size = 4 << ((cpu->ctr >> 16) & 0xF); |
| uint64_t vaddr_in = (uint64_t) value; |
| uint64_t vaddr = vaddr_in & ~(dline_size - 1); |
| void *haddr; |
| int mem_idx = cpu_mmu_index(env, false); |
| |
| /* This won't be crossing page boundaries */ |
| haddr = probe_read(env, vaddr, dline_size, mem_idx, GETPC()); |
| if (haddr) { |
| |
| ram_addr_t offset; |
| MemoryRegion *mr; |
| |
| /* RCU lock is already being held */ |
| mr = memory_region_from_host(haddr, &offset); |
| |
| if (mr) { |
| memory_region_writeback(mr, offset, dline_size); |
| } |
| } |
| } |
| |
| static const ARMCPRegInfo dcpop_reg[] = { |
| { .name = "DC_CVAP", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 12, .opc2 = 1, |
| .access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END, |
| .accessfn = aa64_cacheop_poc_access, .writefn = dccvap_writefn }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo dcpodp_reg[] = { |
| { .name = "DC_CVADP", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 13, .opc2 = 1, |
| .access = PL0_W, .type = ARM_CP_NO_RAW | ARM_CP_SUPPRESS_TB_END, |
| .accessfn = aa64_cacheop_poc_access, .writefn = dccvap_writefn }, |
| REGINFO_SENTINEL |
| }; |
| #endif /*CONFIG_USER_ONLY*/ |
| |
| static CPAccessResult access_aa64_tid5(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if ((arm_current_el(env) < 2) && (arm_hcr_el2_eff(env) & HCR_TID5)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult access_mte(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| int el = arm_current_el(env); |
| |
| if (el < 2 && arm_feature(env, ARM_FEATURE_EL2)) { |
| uint64_t hcr = arm_hcr_el2_eff(env); |
| if (!(hcr & HCR_ATA) && (!(hcr & HCR_E2H) || !(hcr & HCR_TGE))) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } |
| if (el < 3 && |
| arm_feature(env, ARM_FEATURE_EL3) && |
| !(env->cp15.scr_el3 & SCR_ATA)) { |
| return CP_ACCESS_TRAP_EL3; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static uint64_t tco_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| return env->pstate & PSTATE_TCO; |
| } |
| |
| static void tco_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t val) |
| { |
| env->pstate = (env->pstate & ~PSTATE_TCO) | (val & PSTATE_TCO); |
| } |
| |
| static const ARMCPRegInfo mte_reginfo[] = { |
| { .name = "TFSRE0_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 6, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_mte, |
| .fieldoffset = offsetof(CPUARMState, cp15.tfsr_el[0]) }, |
| { .name = "TFSR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 5, .crm = 6, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_mte, |
| .fieldoffset = offsetof(CPUARMState, cp15.tfsr_el[1]) }, |
| { .name = "TFSR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 5, .crm = 6, .opc2 = 0, |
| .access = PL2_RW, .accessfn = access_mte, |
| .fieldoffset = offsetof(CPUARMState, cp15.tfsr_el[2]) }, |
| { .name = "TFSR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 5, .crm = 6, .opc2 = 0, |
| .access = PL3_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.tfsr_el[3]) }, |
| { .name = "RGSR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 5, |
| .access = PL1_RW, .accessfn = access_mte, |
| .fieldoffset = offsetof(CPUARMState, cp15.rgsr_el1) }, |
| { .name = "GCR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 6, |
| .access = PL1_RW, .accessfn = access_mte, |
| .fieldoffset = offsetof(CPUARMState, cp15.gcr_el1) }, |
| { .name = "GMID_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 4, |
| .access = PL1_R, .accessfn = access_aa64_tid5, |
| .type = ARM_CP_CONST, .resetvalue = GMID_EL1_BS }, |
| { .name = "TCO", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 7, |
| .type = ARM_CP_NO_RAW, |
| .access = PL0_RW, .readfn = tco_read, .writefn = tco_write }, |
| { .name = "DC_IGVAC", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 3, |
| .type = ARM_CP_NOP, .access = PL1_W, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_IGSW", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 4, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, |
| { .name = "DC_IGDVAC", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 5, |
| .type = ARM_CP_NOP, .access = PL1_W, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_IGDSW", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 6, .opc2 = 6, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, |
| { .name = "DC_CGSW", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 4, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, |
| { .name = "DC_CGDSW", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 10, .opc2 = 6, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, |
| { .name = "DC_CIGSW", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 4, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, |
| { .name = "DC_CIGDSW", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 14, .opc2 = 6, |
| .type = ARM_CP_NOP, .access = PL1_W, .accessfn = access_tsw }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo mte_tco_ro_reginfo[] = { |
| { .name = "TCO", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 4, .crm = 2, .opc2 = 7, |
| .type = ARM_CP_CONST, .access = PL0_RW, }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo mte_el0_cacheop_reginfo[] = { |
| { .name = "DC_CGVAC", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 3, |
| .type = ARM_CP_NOP, .access = PL0_W, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_CGDVAC", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 10, .opc2 = 5, |
| .type = ARM_CP_NOP, .access = PL0_W, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_CGVAP", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 12, .opc2 = 3, |
| .type = ARM_CP_NOP, .access = PL0_W, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_CGDVAP", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 12, .opc2 = 5, |
| .type = ARM_CP_NOP, .access = PL0_W, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_CGVADP", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 13, .opc2 = 3, |
| .type = ARM_CP_NOP, .access = PL0_W, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_CGDVADP", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 13, .opc2 = 5, |
| .type = ARM_CP_NOP, .access = PL0_W, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_CIGVAC", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 3, |
| .type = ARM_CP_NOP, .access = PL0_W, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_CIGDVAC", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 14, .opc2 = 5, |
| .type = ARM_CP_NOP, .access = PL0_W, |
| .accessfn = aa64_cacheop_poc_access }, |
| { .name = "DC_GVA", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 4, .opc2 = 3, |
| .access = PL0_W, .type = ARM_CP_DC_GVA, |
| #ifndef CONFIG_USER_ONLY |
| /* Avoid overhead of an access check that always passes in user-mode */ |
| .accessfn = aa64_zva_access, |
| #endif |
| }, |
| { .name = "DC_GZVA", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 4, .opc2 = 4, |
| .access = PL0_W, .type = ARM_CP_DC_GZVA, |
| #ifndef CONFIG_USER_ONLY |
| /* Avoid overhead of an access check that always passes in user-mode */ |
| .accessfn = aa64_zva_access, |
| #endif |
| }, |
| REGINFO_SENTINEL |
| }; |
| |
| #endif |
| |
| static CPAccessResult access_predinv(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| int el = arm_current_el(env); |
| |
| if (el == 0) { |
| uint64_t sctlr = arm_sctlr(env, el); |
| if (!(sctlr & SCTLR_EnRCTX)) { |
| return CP_ACCESS_TRAP; |
| } |
| } else if (el == 1) { |
| uint64_t hcr = arm_hcr_el2_eff(env); |
| if (hcr & HCR_NV) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static const ARMCPRegInfo predinv_reginfo[] = { |
| { .name = "CFP_RCTX", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 3, .opc2 = 4, |
| .type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv }, |
| { .name = "DVP_RCTX", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 3, .opc2 = 5, |
| .type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv }, |
| { .name = "CPP_RCTX", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 3, .crn = 7, .crm = 3, .opc2 = 7, |
| .type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv }, |
| /* |
| * Note the AArch32 opcodes have a different OPC1. |
| */ |
| { .name = "CFPRCTX", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 7, .crm = 3, .opc2 = 4, |
| .type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv }, |
| { .name = "DVPRCTX", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 7, .crm = 3, .opc2 = 5, |
| .type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv }, |
| { .name = "CPPRCTX", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 7, .crm = 3, .opc2 = 7, |
| .type = ARM_CP_NOP, .access = PL0_W, .accessfn = access_predinv }, |
| REGINFO_SENTINEL |
| }; |
| |
| static uint64_t ccsidr2_read(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| /* Read the high 32 bits of the current CCSIDR */ |
| return extract64(ccsidr_read(env, ri), 32, 32); |
| } |
| |
| static const ARMCPRegInfo ccsidr2_reginfo[] = { |
| { .name = "CCSIDR2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 1, .crn = 0, .crm = 0, .opc2 = 2, |
| .access = PL1_R, |
| .accessfn = access_aa64_tid2, |
| .readfn = ccsidr2_read, .type = ARM_CP_NO_RAW }, |
| REGINFO_SENTINEL |
| }; |
| |
| static CPAccessResult access_aa64_tid3(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if ((arm_current_el(env) < 2) && (arm_hcr_el2_eff(env) & HCR_TID3)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult access_aa32_tid3(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| return access_aa64_tid3(env, ri, isread); |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult access_jazelle(CPUARMState *env, const ARMCPRegInfo *ri, |
| bool isread) |
| { |
| if (arm_current_el(env) == 1 && (arm_hcr_el2_eff(env) & HCR_TID0)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| |
| return CP_ACCESS_OK; |
| } |
| |
| static CPAccessResult access_joscr_jmcr(CPUARMState *env, |
| const ARMCPRegInfo *ri, bool isread) |
| { |
| /* |
| * HSTR.TJDBX traps JOSCR and JMCR accesses, but it exists only |
| * in v7A, not in v8A. |
| */ |
| if (!arm_feature(env, ARM_FEATURE_V8) && |
| arm_current_el(env) < 2 && !arm_is_secure_below_el3(env) && |
| (env->cp15.hstr_el2 & HSTR_TJDBX)) { |
| return CP_ACCESS_TRAP_EL2; |
| } |
| return CP_ACCESS_OK; |
| } |
| |
| static const ARMCPRegInfo jazelle_regs[] = { |
| { .name = "JIDR", |
| .cp = 14, .crn = 0, .crm = 0, .opc1 = 7, .opc2 = 0, |
| .access = PL1_R, .accessfn = access_jazelle, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "JOSCR", |
| .cp = 14, .crn = 1, .crm = 0, .opc1 = 7, .opc2 = 0, |
| .accessfn = access_joscr_jmcr, |
| .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "JMCR", |
| .cp = 14, .crn = 2, .crm = 0, .opc1 = 7, .opc2 = 0, |
| .accessfn = access_joscr_jmcr, |
| .access = PL1_RW, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo vhe_reginfo[] = { |
| { .name = "CONTEXTIDR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 13, .crm = 0, .opc2 = 1, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.contextidr_el[2]) }, |
| { .name = "TTBR1_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 2, .crm = 0, .opc2 = 1, |
| .access = PL2_RW, .writefn = vmsa_tcr_ttbr_el2_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.ttbr1_el[2]) }, |
| #ifndef CONFIG_USER_ONLY |
| { .name = "CNTHV_CVAL_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 3, .opc2 = 2, |
| .fieldoffset = |
| offsetof(CPUARMState, cp15.c14_timer[GTIMER_HYPVIRT].cval), |
| .type = ARM_CP_IO, .access = PL2_RW, |
| .writefn = gt_hv_cval_write, .raw_writefn = raw_write }, |
| { .name = "CNTHV_TVAL_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 3, .opc2 = 0, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO, .access = PL2_RW, |
| .resetfn = gt_hv_timer_reset, |
| .readfn = gt_hv_tval_read, .writefn = gt_hv_tval_write }, |
| { .name = "CNTHV_CTL_EL2", .state = ARM_CP_STATE_BOTH, |
| .type = ARM_CP_IO, |
| .opc0 = 3, .opc1 = 4, .crn = 14, .crm = 3, .opc2 = 1, |
| .access = PL2_RW, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_HYPVIRT].ctl), |
| .writefn = gt_hv_ctl_write, .raw_writefn = raw_write }, |
| { .name = "CNTP_CTL_EL02", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 5, .crn = 14, .crm = 2, .opc2 = 1, |
| .type = ARM_CP_IO | ARM_CP_ALIAS, |
| .access = PL2_RW, .accessfn = e2h_access, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].ctl), |
| .writefn = gt_phys_ctl_write, .raw_writefn = raw_write }, |
| { .name = "CNTV_CTL_EL02", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 5, .crn = 14, .crm = 3, .opc2 = 1, |
| .type = ARM_CP_IO | ARM_CP_ALIAS, |
| .access = PL2_RW, .accessfn = e2h_access, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].ctl), |
| .writefn = gt_virt_ctl_write, .raw_writefn = raw_write }, |
| { .name = "CNTP_TVAL_EL02", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 5, .crn = 14, .crm = 2, .opc2 = 0, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO | ARM_CP_ALIAS, |
| .access = PL2_RW, .accessfn = e2h_access, |
| .readfn = gt_phys_tval_read, .writefn = gt_phys_tval_write }, |
| { .name = "CNTV_TVAL_EL02", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 5, .crn = 14, .crm = 3, .opc2 = 0, |
| .type = ARM_CP_NO_RAW | ARM_CP_IO | ARM_CP_ALIAS, |
| .access = PL2_RW, .accessfn = e2h_access, |
| .readfn = gt_virt_tval_read, .writefn = gt_virt_tval_write }, |
| { .name = "CNTP_CVAL_EL02", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 5, .crn = 14, .crm = 2, .opc2 = 2, |
| .type = ARM_CP_IO | ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_PHYS].cval), |
| .access = PL2_RW, .accessfn = e2h_access, |
| .writefn = gt_phys_cval_write, .raw_writefn = raw_write }, |
| { .name = "CNTV_CVAL_EL02", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 5, .crn = 14, .crm = 3, .opc2 = 2, |
| .type = ARM_CP_IO | ARM_CP_ALIAS, |
| .fieldoffset = offsetof(CPUARMState, cp15.c14_timer[GTIMER_VIRT].cval), |
| .access = PL2_RW, .accessfn = e2h_access, |
| .writefn = gt_virt_cval_write, .raw_writefn = raw_write }, |
| #endif |
| REGINFO_SENTINEL |
| }; |
| |
| #ifndef CONFIG_USER_ONLY |
| static const ARMCPRegInfo ats1e1_reginfo[] = { |
| { .name = "AT_S1E1R", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 0, |
| .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write64 }, |
| { .name = "AT_S1E1W", .state = ARM_CP_STATE_AA64, |
| .opc0 = 1, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 1, |
| .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write64 }, |
| REGINFO_SENTINEL |
| }; |
| |
| static const ARMCPRegInfo ats1cp_reginfo[] = { |
| { .name = "ATS1CPRP", |
| .cp = 15, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 0, |
| .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write }, |
| { .name = "ATS1CPWP", |
| .cp = 15, .opc1 = 0, .crn = 7, .crm = 9, .opc2 = 1, |
| .access = PL1_W, .type = ARM_CP_NO_RAW | ARM_CP_RAISES_EXC, |
| .writefn = ats_write }, |
| REGINFO_SENTINEL |
| }; |
| #endif |
| |
| /* |
| * ACTLR2 and HACTLR2 map to ACTLR_EL1[63:32] and |
| * ACTLR_EL2[63:32]. They exist only if the ID_MMFR4.AC2 field |
| * is non-zero, which is never for ARMv7, optionally in ARMv8 |
| * and mandatorily for ARMv8.2 and up. |
| * ACTLR2 is banked for S and NS if EL3 is AArch32. Since QEMU's |
| * implementation is RAZ/WI we can ignore this detail, as we |
| * do for ACTLR. |
| */ |
| static const ARMCPRegInfo actlr2_hactlr2_reginfo[] = { |
| { .name = "ACTLR2", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 3, |
| .access = PL1_RW, .accessfn = access_tacr, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "HACTLR2", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 3, |
| .access = PL2_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| |
| void register_cp_regs_for_features(ARMCPU *cpu) |
| { |
| /* Register all the coprocessor registers based on feature bits */ |
| CPUARMState *env = &cpu->env; |
| if (arm_feature(env, ARM_FEATURE_M)) { |
| /* M profile has no coprocessor registers */ |
| return; |
| } |
| |
| define_arm_cp_regs(cpu, cp_reginfo); |
| if (!arm_feature(env, ARM_FEATURE_V8)) { |
| /* Must go early as it is full of wildcards that may be |
| * overridden by later definitions. |
| */ |
| define_arm_cp_regs(cpu, not_v8_cp_reginfo); |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_V6)) { |
| /* The ID registers all have impdef reset values */ |
| ARMCPRegInfo v6_idregs[] = { |
| { .name = "ID_PFR0", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 0, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_pfr0 }, |
| /* ID_PFR1 is not a plain ARM_CP_CONST because we don't know |
| * the value of the GIC field until after we define these regs. |
| */ |
| { .name = "ID_PFR1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 1, |
| .access = PL1_R, .type = ARM_CP_NO_RAW, |
| .accessfn = access_aa32_tid3, |
| .readfn = id_pfr1_read, |
| .writefn = arm_cp_write_ignore }, |
| { .name = "ID_DFR0", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 2, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_dfr0 }, |
| { .name = "ID_AFR0", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 3, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->id_afr0 }, |
| { .name = "ID_MMFR0", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 4, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_mmfr0 }, |
| { .name = "ID_MMFR1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 5, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_mmfr1 }, |
| { .name = "ID_MMFR2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 6, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_mmfr2 }, |
| { .name = "ID_MMFR3", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 1, .opc2 = 7, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_mmfr3 }, |
| { .name = "ID_ISAR0", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 0, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_isar0 }, |
| { .name = "ID_ISAR1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 1, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_isar1 }, |
| { .name = "ID_ISAR2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 2, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_isar2 }, |
| { .name = "ID_ISAR3", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 3, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_isar3 }, |
| { .name = "ID_ISAR4", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 4, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_isar4 }, |
| { .name = "ID_ISAR5", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 5, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_isar5 }, |
| { .name = "ID_MMFR4", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 6, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_mmfr4 }, |
| { .name = "ID_ISAR6", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 7, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa32_tid3, |
| .resetvalue = cpu->isar.id_isar6 }, |
| REGINFO_SENTINEL |
| }; |
| define_arm_cp_regs(cpu, v6_idregs); |
| define_arm_cp_regs(cpu, v6_cp_reginfo); |
| } else { |
| define_arm_cp_regs(cpu, not_v6_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_V6K)) { |
| define_arm_cp_regs(cpu, v6k_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_V7MP) && |
| !arm_feature(env, ARM_FEATURE_PMSA)) { |
| define_arm_cp_regs(cpu, v7mp_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_V7VE)) { |
| define_arm_cp_regs(cpu, pmovsset_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_V7)) { |
| ARMCPRegInfo clidr = { |
| .name = "CLIDR", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 1, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid2, |
| .resetvalue = cpu->clidr |
| }; |
| define_one_arm_cp_reg(cpu, &clidr); |
| define_arm_cp_regs(cpu, v7_cp_reginfo); |
| define_debug_regs(cpu); |
| define_pmu_regs(cpu); |
| } else { |
| define_arm_cp_regs(cpu, not_v7_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| /* AArch64 ID registers, which all have impdef reset values. |
| * Note that within the ID register ranges the unused slots |
| * must all RAZ, not UNDEF; future architecture versions may |
| * define new registers here. |
| */ |
| ARMCPRegInfo v8_idregs[] = { |
| /* |
| * ID_AA64PFR0_EL1 is not a plain ARM_CP_CONST in system |
| * emulation because we don't know the right value for the |
| * GIC field until after we define these regs. |
| */ |
| { .name = "ID_AA64PFR0_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 0, |
| .access = PL1_R, |
| #ifdef CONFIG_USER_ONLY |
| .type = ARM_CP_CONST, |
| .resetvalue = cpu->isar.id_aa64pfr0 |
| #else |
| .type = ARM_CP_NO_RAW, |
| .accessfn = access_aa64_tid3, |
| .readfn = id_aa64pfr0_read, |
| .writefn = arm_cp_write_ignore |
| #endif |
| }, |
| { .name = "ID_AA64PFR1_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 1, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_aa64pfr1}, |
| { .name = "ID_AA64PFR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 2, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64PFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 3, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64ZFR0_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 4, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_aa64zfr0 }, |
| { .name = "ID_AA64PFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 5, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64PFR6_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 6, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64PFR7_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 4, .opc2 = 7, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64DFR0_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 0, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_aa64dfr0 }, |
| { .name = "ID_AA64DFR1_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 1, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_aa64dfr1 }, |
| { .name = "ID_AA64DFR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 2, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64DFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 3, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64AFR0_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 4, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->id_aa64afr0 }, |
| { .name = "ID_AA64AFR1_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 5, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->id_aa64afr1 }, |
| { .name = "ID_AA64AFR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 6, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64AFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 5, .opc2 = 7, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64ISAR0_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 0, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_aa64isar0 }, |
| { .name = "ID_AA64ISAR1_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 1, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_aa64isar1 }, |
| { .name = "ID_AA64ISAR2_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 2, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64ISAR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 3, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64ISAR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 4, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64ISAR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 5, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64ISAR6_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 6, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64ISAR7_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 6, .opc2 = 7, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64MMFR0_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 0, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_aa64mmfr0 }, |
| { .name = "ID_AA64MMFR1_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 1, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_aa64mmfr1 }, |
| { .name = "ID_AA64MMFR2_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 2, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_aa64mmfr2 }, |
| { .name = "ID_AA64MMFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 3, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64MMFR4_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 4, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64MMFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 5, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64MMFR6_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 6, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_AA64MMFR7_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 7, .opc2 = 7, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "MVFR0_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 0, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.mvfr0 }, |
| { .name = "MVFR1_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 1, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.mvfr1 }, |
| { .name = "MVFR2_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 2, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.mvfr2 }, |
| { .name = "MVFR3_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 3, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "ID_PFR2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 4, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = cpu->isar.id_pfr2 }, |
| { .name = "MVFR5_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 5, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "MVFR6_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 6, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "MVFR7_EL1_RESERVED", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 3, .opc2 = 7, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .accessfn = access_aa64_tid3, |
| .resetvalue = 0 }, |
| { .name = "PMCEID0", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 9, .crm = 12, .opc2 = 6, |
| .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, |
| .resetvalue = extract64(cpu->pmceid0, 0, 32) }, |
| { .name = "PMCEID0_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 6, |
| .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, |
| .resetvalue = cpu->pmceid0 }, |
| { .name = "PMCEID1", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 0, .crn = 9, .crm = 12, .opc2 = 7, |
| .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, |
| .resetvalue = extract64(cpu->pmceid1, 0, 32) }, |
| { .name = "PMCEID1_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .crn = 9, .crm = 12, .opc2 = 7, |
| .access = PL0_R, .accessfn = pmreg_access, .type = ARM_CP_CONST, |
| .resetvalue = cpu->pmceid1 }, |
| REGINFO_SENTINEL |
| }; |
| #ifdef CONFIG_USER_ONLY |
| ARMCPRegUserSpaceInfo v8_user_idregs[] = { |
| { .name = "ID_AA64PFR0_EL1", |
| .exported_bits = 0x000f000f00ff0000, |
| .fixed_bits = 0x0000000000000011 }, |
| { .name = "ID_AA64PFR1_EL1", |
| .exported_bits = 0x00000000000000f0 }, |
| { .name = "ID_AA64PFR*_EL1_RESERVED", |
| .is_glob = true }, |
| { .name = "ID_AA64ZFR0_EL1" }, |
| { .name = "ID_AA64MMFR0_EL1", |
| .fixed_bits = 0x00000000ff000000 }, |
| { .name = "ID_AA64MMFR1_EL1" }, |
| { .name = "ID_AA64MMFR*_EL1_RESERVED", |
| .is_glob = true }, |
| { .name = "ID_AA64DFR0_EL1", |
| .fixed_bits = 0x0000000000000006 }, |
| { .name = "ID_AA64DFR1_EL1" }, |
| { .name = "ID_AA64DFR*_EL1_RESERVED", |
| .is_glob = true }, |
| { .name = "ID_AA64AFR*", |
| .is_glob = true }, |
| { .name = "ID_AA64ISAR0_EL1", |
| .exported_bits = 0x00fffffff0fffff0 }, |
| { .name = "ID_AA64ISAR1_EL1", |
| .exported_bits = 0x000000f0ffffffff }, |
| { .name = "ID_AA64ISAR*_EL1_RESERVED", |
| .is_glob = true }, |
| REGUSERINFO_SENTINEL |
| }; |
| modify_arm_cp_regs(v8_idregs, v8_user_idregs); |
| #endif |
| /* RVBAR_EL1 is only implemented if EL1 is the highest EL */ |
| if (!arm_feature(env, ARM_FEATURE_EL3) && |
| !arm_feature(env, ARM_FEATURE_EL2)) { |
| ARMCPRegInfo rvbar = { |
| .name = "RVBAR_EL1", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 0, .opc2 = 1, |
| .access = PL1_R, |
| .fieldoffset = offsetof(CPUARMState, cp15.rvbar), |
| }; |
| define_one_arm_cp_reg(cpu, &rvbar); |
| } |
| define_arm_cp_regs(cpu, v8_idregs); |
| define_arm_cp_regs(cpu, v8_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_EL2)) { |
| uint64_t vmpidr_def = mpidr_read_val(env); |
| ARMCPRegInfo vpidr_regs[] = { |
| { .name = "VPIDR", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, .accessfn = access_el3_aa32ns, |
| .resetvalue = cpu->midr, .type = ARM_CP_ALIAS, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.vpidr_el2) }, |
| { .name = "VPIDR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, .resetvalue = cpu->midr, |
| .fieldoffset = offsetof(CPUARMState, cp15.vpidr_el2) }, |
| { .name = "VMPIDR", .state = ARM_CP_STATE_AA32, |
| .cp = 15, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5, |
| .access = PL2_RW, .accessfn = access_el3_aa32ns, |
| .resetvalue = vmpidr_def, .type = ARM_CP_ALIAS, |
| .fieldoffset = offsetoflow32(CPUARMState, cp15.vmpidr_el2) }, |
| { .name = "VMPIDR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5, |
| .access = PL2_RW, |
| .resetvalue = vmpidr_def, |
| .fieldoffset = offsetof(CPUARMState, cp15.vmpidr_el2) }, |
| REGINFO_SENTINEL |
| }; |
| define_arm_cp_regs(cpu, vpidr_regs); |
| define_arm_cp_regs(cpu, el2_cp_reginfo); |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| define_arm_cp_regs(cpu, el2_v8_cp_reginfo); |
| } |
| if (cpu_isar_feature(aa64_sel2, cpu)) { |
| define_arm_cp_regs(cpu, el2_sec_cp_reginfo); |
| } |
| /* RVBAR_EL2 is only implemented if EL2 is the highest EL */ |
| if (!arm_feature(env, ARM_FEATURE_EL3)) { |
| ARMCPRegInfo rvbar = { |
| .name = "RVBAR_EL2", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 4, .crn = 12, .crm = 0, .opc2 = 1, |
| .access = PL2_R, |
| .fieldoffset = offsetof(CPUARMState, cp15.rvbar), |
| }; |
| define_one_arm_cp_reg(cpu, &rvbar); |
| } |
| } else { |
| /* If EL2 is missing but higher ELs are enabled, we need to |
| * register the no_el2 reginfos. |
| */ |
| if (arm_feature(env, ARM_FEATURE_EL3)) { |
| /* When EL3 exists but not EL2, VPIDR and VMPIDR take the value |
| * of MIDR_EL1 and MPIDR_EL1. |
| */ |
| ARMCPRegInfo vpidr_regs[] = { |
| { .name = "VPIDR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 0, |
| .access = PL2_RW, .accessfn = access_el3_aa32ns, |
| .type = ARM_CP_CONST, .resetvalue = cpu->midr, |
| .fieldoffset = offsetof(CPUARMState, cp15.vpidr_el2) }, |
| { .name = "VMPIDR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 0, .crm = 0, .opc2 = 5, |
| .access = PL2_RW, .accessfn = access_el3_aa32ns, |
| .type = ARM_CP_NO_RAW, |
| .writefn = arm_cp_write_ignore, .readfn = mpidr_read }, |
| REGINFO_SENTINEL |
| }; |
| define_arm_cp_regs(cpu, vpidr_regs); |
| define_arm_cp_regs(cpu, el3_no_el2_cp_reginfo); |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| define_arm_cp_regs(cpu, el3_no_el2_v8_cp_reginfo); |
| } |
| } |
| } |
| if (arm_feature(env, ARM_FEATURE_EL3)) { |
| define_arm_cp_regs(cpu, el3_cp_reginfo); |
| ARMCPRegInfo el3_regs[] = { |
| { .name = "RVBAR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 12, .crm = 0, .opc2 = 1, |
| .access = PL3_R, |
| .fieldoffset = offsetof(CPUARMState, cp15.rvbar), |
| }, |
| { .name = "SCTLR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 0, .opc2 = 0, |
| .access = PL3_RW, |
| .raw_writefn = raw_write, .writefn = sctlr_write, |
| .fieldoffset = offsetof(CPUARMState, cp15.sctlr_el[3]), |
| .resetvalue = cpu->reset_sctlr }, |
| REGINFO_SENTINEL |
| }; |
| |
| define_arm_cp_regs(cpu, el3_regs); |
| } |
| /* The behaviour of NSACR is sufficiently various that we don't |
| * try to describe it in a single reginfo: |
| * if EL3 is 64 bit, then trap to EL3 from S EL1, |
| * reads as constant 0xc00 from NS EL1 and NS EL2 |
| * if EL3 is 32 bit, then RW at EL3, RO at NS EL1 and NS EL2 |
| * if v7 without EL3, register doesn't exist |
| * if v8 without EL3, reads as constant 0xc00 from NS EL1 and NS EL2 |
| */ |
| if (arm_feature(env, ARM_FEATURE_EL3)) { |
| if (arm_feature(env, ARM_FEATURE_AARCH64)) { |
| ARMCPRegInfo nsacr = { |
| .name = "NSACR", .type = ARM_CP_CONST, |
| .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 2, |
| .access = PL1_RW, .accessfn = nsacr_access, |
| .resetvalue = 0xc00 |
| }; |
| define_one_arm_cp_reg(cpu, &nsacr); |
| } else { |
| ARMCPRegInfo nsacr = { |
| .name = "NSACR", |
| .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 2, |
| .access = PL3_RW | PL1_R, |
| .resetvalue = 0, |
| .fieldoffset = offsetof(CPUARMState, cp15.nsacr) |
| }; |
| define_one_arm_cp_reg(cpu, &nsacr); |
| } |
| } else { |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| ARMCPRegInfo nsacr = { |
| .name = "NSACR", .type = ARM_CP_CONST, |
| .cp = 15, .opc1 = 0, .crn = 1, .crm = 1, .opc2 = 2, |
| .access = PL1_R, |
| .resetvalue = 0xc00 |
| }; |
| define_one_arm_cp_reg(cpu, &nsacr); |
| } |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_PMSA)) { |
| if (arm_feature(env, ARM_FEATURE_V6)) { |
| /* PMSAv6 not implemented */ |
| assert(arm_feature(env, ARM_FEATURE_V7)); |
| define_arm_cp_regs(cpu, vmsa_pmsa_cp_reginfo); |
| define_arm_cp_regs(cpu, pmsav7_cp_reginfo); |
| } else { |
| define_arm_cp_regs(cpu, pmsav5_cp_reginfo); |
| } |
| } else { |
| define_arm_cp_regs(cpu, vmsa_pmsa_cp_reginfo); |
| define_arm_cp_regs(cpu, vmsa_cp_reginfo); |
| /* TTCBR2 is introduced with ARMv8.2-AA32HPD. */ |
| if (cpu_isar_feature(aa32_hpd, cpu)) { |
| define_one_arm_cp_reg(cpu, &ttbcr2_reginfo); |
| } |
| } |
| if (arm_feature(env, ARM_FEATURE_THUMB2EE)) { |
| define_arm_cp_regs(cpu, t2ee_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_GENERIC_TIMER)) { |
| define_arm_cp_regs(cpu, generic_timer_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_VAPA)) { |
| define_arm_cp_regs(cpu, vapa_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_CACHE_TEST_CLEAN)) { |
| define_arm_cp_regs(cpu, cache_test_clean_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_CACHE_DIRTY_REG)) { |
| define_arm_cp_regs(cpu, cache_dirty_status_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_CACHE_BLOCK_OPS)) { |
| define_arm_cp_regs(cpu, cache_block_ops_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_OMAPCP)) { |
| define_arm_cp_regs(cpu, omap_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_STRONGARM)) { |
| define_arm_cp_regs(cpu, strongarm_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_XSCALE)) { |
| define_arm_cp_regs(cpu, xscale_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_DUMMY_C15_REGS)) { |
| define_arm_cp_regs(cpu, dummy_c15_cp_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_LPAE)) { |
| define_arm_cp_regs(cpu, lpae_cp_reginfo); |
| } |
| if (cpu_isar_feature(aa32_jazelle, cpu)) { |
| define_arm_cp_regs(cpu, jazelle_regs); |
| } |
| /* Slightly awkwardly, the OMAP and StrongARM cores need all of |
| * cp15 crn=0 to be writes-ignored, whereas for other cores they should |
| * be read-only (ie write causes UNDEF exception). |
| */ |
| { |
| ARMCPRegInfo id_pre_v8_midr_cp_reginfo[] = { |
| /* Pre-v8 MIDR space. |
| * Note that the MIDR isn't a simple constant register because |
| * of the TI925 behaviour where writes to another register can |
| * cause the MIDR value to change. |
| * |
| * Unimplemented registers in the c15 0 0 0 space default to |
| * MIDR. Define MIDR first as this entire space, then CTR, TCMTR |
| * and friends override accordingly. |
| */ |
| { .name = "MIDR", |
| .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = CP_ANY, |
| .access = PL1_R, .resetvalue = cpu->midr, |
| .writefn = arm_cp_write_ignore, .raw_writefn = raw_write, |
| .readfn = midr_read, |
| .fieldoffset = offsetof(CPUARMState, cp15.c0_cpuid), |
| .type = ARM_CP_OVERRIDE }, |
| /* crn = 0 op1 = 0 crm = 3..7 : currently unassigned; we RAZ. */ |
| { .name = "DUMMY", |
| .cp = 15, .crn = 0, .crm = 3, .opc1 = 0, .opc2 = CP_ANY, |
| .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "DUMMY", |
| .cp = 15, .crn = 0, .crm = 4, .opc1 = 0, .opc2 = CP_ANY, |
| .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "DUMMY", |
| .cp = 15, .crn = 0, .crm = 5, .opc1 = 0, .opc2 = CP_ANY, |
| .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "DUMMY", |
| .cp = 15, .crn = 0, .crm = 6, .opc1 = 0, .opc2 = CP_ANY, |
| .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| { .name = "DUMMY", |
| .cp = 15, .crn = 0, .crm = 7, .opc1 = 0, .opc2 = CP_ANY, |
| .access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| ARMCPRegInfo id_v8_midr_cp_reginfo[] = { |
| { .name = "MIDR_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 0, .opc2 = 0, |
| .access = PL1_R, .type = ARM_CP_NO_RAW, .resetvalue = cpu->midr, |
| .fieldoffset = offsetof(CPUARMState, cp15.c0_cpuid), |
| .readfn = midr_read }, |
| /* crn = 0 op1 = 0 crm = 0 op2 = 4,7 : AArch32 aliases of MIDR */ |
| { .name = "MIDR", .type = ARM_CP_ALIAS | ARM_CP_CONST, |
| .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 4, |
| .access = PL1_R, .resetvalue = cpu->midr }, |
| { .name = "MIDR", .type = ARM_CP_ALIAS | ARM_CP_CONST, |
| .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 7, |
| .access = PL1_R, .resetvalue = cpu->midr }, |
| { .name = "REVIDR_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 0, .opc2 = 6, |
| .access = PL1_R, |
| .accessfn = access_aa64_tid1, |
| .type = ARM_CP_CONST, .resetvalue = cpu->revidr }, |
| REGINFO_SENTINEL |
| }; |
| ARMCPRegInfo id_cp_reginfo[] = { |
| /* These are common to v8 and pre-v8 */ |
| { .name = "CTR", |
| .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 1, |
| .access = PL1_R, .accessfn = ctr_el0_access, |
| .type = ARM_CP_CONST, .resetvalue = cpu->ctr }, |
| { .name = "CTR_EL0", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 3, .opc2 = 1, .crn = 0, .crm = 0, |
| .access = PL0_R, .accessfn = ctr_el0_access, |
| .type = ARM_CP_CONST, .resetvalue = cpu->ctr }, |
| /* TCMTR and TLBTR exist in v8 but have no 64-bit versions */ |
| { .name = "TCMTR", |
| .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 2, |
| .access = PL1_R, |
| .accessfn = access_aa32_tid1, |
| .type = ARM_CP_CONST, .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| /* TLBTR is specific to VMSA */ |
| ARMCPRegInfo id_tlbtr_reginfo = { |
| .name = "TLBTR", |
| .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 3, |
| .access = PL1_R, |
| .accessfn = access_aa32_tid1, |
| .type = ARM_CP_CONST, .resetvalue = 0, |
| }; |
| /* MPUIR is specific to PMSA V6+ */ |
| ARMCPRegInfo id_mpuir_reginfo = { |
| .name = "MPUIR", |
| .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 4, |
| .access = PL1_R, .type = ARM_CP_CONST, |
| .resetvalue = cpu->pmsav7_dregion << 8 |
| }; |
| ARMCPRegInfo crn0_wi_reginfo = { |
| .name = "CRN0_WI", .cp = 15, .crn = 0, .crm = CP_ANY, |
| .opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_W, |
| .type = ARM_CP_NOP | ARM_CP_OVERRIDE |
| }; |
| #ifdef CONFIG_USER_ONLY |
| ARMCPRegUserSpaceInfo id_v8_user_midr_cp_reginfo[] = { |
| { .name = "MIDR_EL1", |
| .exported_bits = 0x00000000ffffffff }, |
| { .name = "REVIDR_EL1" }, |
| REGUSERINFO_SENTINEL |
| }; |
| modify_arm_cp_regs(id_v8_midr_cp_reginfo, id_v8_user_midr_cp_reginfo); |
| #endif |
| if (arm_feature(env, ARM_FEATURE_OMAPCP) || |
| arm_feature(env, ARM_FEATURE_STRONGARM)) { |
| ARMCPRegInfo *r; |
| /* Register the blanket "writes ignored" value first to cover the |
| * whole space. Then update the specific ID registers to allow write |
| * access, so that they ignore writes rather than causing them to |
| * UNDEF. |
| */ |
| define_one_arm_cp_reg(cpu, &crn0_wi_reginfo); |
| for (r = id_pre_v8_midr_cp_reginfo; |
| r->type != ARM_CP_SENTINEL; r++) { |
| r->access = PL1_RW; |
| } |
| for (r = id_cp_reginfo; r->type != ARM_CP_SENTINEL; r++) { |
| r->access = PL1_RW; |
| } |
| id_mpuir_reginfo.access = PL1_RW; |
| id_tlbtr_reginfo.access = PL1_RW; |
| } |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| define_arm_cp_regs(cpu, id_v8_midr_cp_reginfo); |
| } else { |
| define_arm_cp_regs(cpu, id_pre_v8_midr_cp_reginfo); |
| } |
| define_arm_cp_regs(cpu, id_cp_reginfo); |
| if (!arm_feature(env, ARM_FEATURE_PMSA)) { |
| define_one_arm_cp_reg(cpu, &id_tlbtr_reginfo); |
| } else if (arm_feature(env, ARM_FEATURE_V7)) { |
| define_one_arm_cp_reg(cpu, &id_mpuir_reginfo); |
| } |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_MPIDR)) { |
| ARMCPRegInfo mpidr_cp_reginfo[] = { |
| { .name = "MPIDR_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 5, |
| .access = PL1_R, .readfn = mpidr_read, .type = ARM_CP_NO_RAW }, |
| REGINFO_SENTINEL |
| }; |
| #ifdef CONFIG_USER_ONLY |
| ARMCPRegUserSpaceInfo mpidr_user_cp_reginfo[] = { |
| { .name = "MPIDR_EL1", |
| .fixed_bits = 0x0000000080000000 }, |
| REGUSERINFO_SENTINEL |
| }; |
| modify_arm_cp_regs(mpidr_cp_reginfo, mpidr_user_cp_reginfo); |
| #endif |
| define_arm_cp_regs(cpu, mpidr_cp_reginfo); |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_AUXCR)) { |
| ARMCPRegInfo auxcr_reginfo[] = { |
| { .name = "ACTLR_EL1", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 1, |
| .access = PL1_RW, .accessfn = access_tacr, |
| .type = ARM_CP_CONST, .resetvalue = cpu->reset_auxcr }, |
| { .name = "ACTLR_EL2", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 4, .crn = 1, .crm = 0, .opc2 = 1, |
| .access = PL2_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| { .name = "ACTLR_EL3", .state = ARM_CP_STATE_AA64, |
| .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 0, .opc2 = 1, |
| .access = PL3_RW, .type = ARM_CP_CONST, |
| .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| define_arm_cp_regs(cpu, auxcr_reginfo); |
| if (cpu_isar_feature(aa32_ac2, cpu)) { |
| define_arm_cp_regs(cpu, actlr2_hactlr2_reginfo); |
| } |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_CBAR)) { |
| /* |
| * CBAR is IMPDEF, but common on Arm Cortex-A implementations. |
| * There are two flavours: |
| * (1) older 32-bit only cores have a simple 32-bit CBAR |
| * (2) 64-bit cores have a 64-bit CBAR visible to AArch64, plus a |
| * 32-bit register visible to AArch32 at a different encoding |
| * to the "flavour 1" register and with the bits rearranged to |
| * be able to squash a 64-bit address into the 32-bit view. |
| * We distinguish the two via the ARM_FEATURE_AARCH64 flag, but |
| * in future if we support AArch32-only configs of some of the |
| * AArch64 cores we might need to add a specific feature flag |
| * to indicate cores with "flavour 2" CBAR. |
| */ |
| if (arm_feature(env, ARM_FEATURE_AARCH64)) { |
| /* 32 bit view is [31:18] 0...0 [43:32]. */ |
| uint32_t cbar32 = (extract64(cpu->reset_cbar, 18, 14) << 18) |
| | extract64(cpu->reset_cbar, 32, 12); |
| ARMCPRegInfo cbar_reginfo[] = { |
| { .name = "CBAR", |
| .type = ARM_CP_CONST, |
| .cp = 15, .crn = 15, .crm = 3, .opc1 = 1, .opc2 = 0, |
| .access = PL1_R, .resetvalue = cbar32 }, |
| { .name = "CBAR_EL1", .state = ARM_CP_STATE_AA64, |
| .type = ARM_CP_CONST, |
| .opc0 = 3, .opc1 = 1, .crn = 15, .crm = 3, .opc2 = 0, |
| .access = PL1_R, .resetvalue = cpu->reset_cbar }, |
| REGINFO_SENTINEL |
| }; |
| /* We don't implement a r/w 64 bit CBAR currently */ |
| assert(arm_feature(env, ARM_FEATURE_CBAR_RO)); |
| define_arm_cp_regs(cpu, cbar_reginfo); |
| } else { |
| ARMCPRegInfo cbar = { |
| .name = "CBAR", |
| .cp = 15, .crn = 15, .crm = 0, .opc1 = 4, .opc2 = 0, |
| .access = PL1_R|PL3_W, .resetvalue = cpu->reset_cbar, |
| .fieldoffset = offsetof(CPUARMState, |
| cp15.c15_config_base_address) |
| }; |
| if (arm_feature(env, ARM_FEATURE_CBAR_RO)) { |
| cbar.access = PL1_R; |
| cbar.fieldoffset = 0; |
| cbar.type = ARM_CP_CONST; |
| } |
| define_one_arm_cp_reg(cpu, &cbar); |
| } |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_VBAR)) { |
| ARMCPRegInfo vbar_cp_reginfo[] = { |
| { .name = "VBAR", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .crn = 12, .crm = 0, .opc1 = 0, .opc2 = 0, |
| .access = PL1_RW, .writefn = vbar_write, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.vbar_s), |
| offsetof(CPUARMState, cp15.vbar_ns) }, |
| .resetvalue = 0 }, |
| REGINFO_SENTINEL |
| }; |
| define_arm_cp_regs(cpu, vbar_cp_reginfo); |
| } |
| |
| /* Generic registers whose values depend on the implementation */ |
| { |
| ARMCPRegInfo sctlr = { |
| .name = "SCTLR", .state = ARM_CP_STATE_BOTH, |
| .opc0 = 3, .opc1 = 0, .crn = 1, .crm = 0, .opc2 = 0, |
| .access = PL1_RW, .accessfn = access_tvm_trvm, |
| .bank_fieldoffsets = { offsetof(CPUARMState, cp15.sctlr_s), |
| offsetof(CPUARMState, cp15.sctlr_ns) }, |
| .writefn = sctlr_write, .resetvalue = cpu->reset_sctlr, |
| .raw_writefn = raw_write, |
| }; |
| if (arm_feature(env, ARM_FEATURE_XSCALE)) { |
| /* Normally we would always end the TB on an SCTLR write, but Linux |
| * arch/arm/mach-pxa/sleep.S expects two instructions following |
| * an MMU enable to execute from cache. Imitate this behaviour. |
| */ |
| sctlr.type |= ARM_CP_SUPPRESS_TB_END; |
| } |
| define_one_arm_cp_reg(cpu, &sctlr); |
| } |
| |
| if (cpu_isar_feature(aa64_lor, cpu)) { |
| define_arm_cp_regs(cpu, lor_reginfo); |
| } |
| if (cpu_isar_feature(aa64_pan, cpu)) { |
| define_one_arm_cp_reg(cpu, &pan_reginfo); |
| } |
| #ifndef CONFIG_USER_ONLY |
| if (cpu_isar_feature(aa64_ats1e1, cpu)) { |
| define_arm_cp_regs(cpu, ats1e1_reginfo); |
| } |
| if (cpu_isar_feature(aa32_ats1e1, cpu)) { |
| define_arm_cp_regs(cpu, ats1cp_reginfo); |
| } |
| #endif |
| if (cpu_isar_feature(aa64_uao, cpu)) { |
| define_one_arm_cp_reg(cpu, &uao_reginfo); |
| } |
| |
| if (cpu_isar_feature(aa64_dit, cpu)) { |
| define_one_arm_cp_reg(cpu, &dit_reginfo); |
| } |
| if (cpu_isar_feature(aa64_ssbs, cpu)) { |
| define_one_arm_cp_reg(cpu, &ssbs_reginfo); |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_EL2) && cpu_isar_feature(aa64_vh, cpu)) { |
| define_arm_cp_regs(cpu, vhe_reginfo); |
| } |
| |
| if (cpu_isar_feature(aa64_sve, cpu)) { |
| define_one_arm_cp_reg(cpu, &zcr_el1_reginfo); |
| if (arm_feature(env, ARM_FEATURE_EL2)) { |
| define_one_arm_cp_reg(cpu, &zcr_el2_reginfo); |
| } else { |
| define_one_arm_cp_reg(cpu, &zcr_no_el2_reginfo); |
| } |
| if (arm_feature(env, ARM_FEATURE_EL3)) { |
| define_one_arm_cp_reg(cpu, &zcr_el3_reginfo); |
| } |
| } |
| |
| #ifdef TARGET_AARCH64 |
| if (cpu_isar_feature(aa64_pauth, cpu)) { |
| define_arm_cp_regs(cpu, pauth_reginfo); |
| } |
| if (cpu_isar_feature(aa64_rndr, cpu)) { |
| define_arm_cp_regs(cpu, rndr_reginfo); |
| } |
| if (cpu_isar_feature(aa64_tlbirange, cpu)) { |
| define_arm_cp_regs(cpu, tlbirange_reginfo); |
| } |
| if (cpu_isar_feature(aa64_tlbios, cpu)) { |
| define_arm_cp_regs(cpu, tlbios_reginfo); |
| } |
| #ifndef CONFIG_USER_ONLY |
| /* Data Cache clean instructions up to PoP */ |
| if (cpu_isar_feature(aa64_dcpop, cpu)) { |
| define_one_arm_cp_reg(cpu, dcpop_reg); |
| |
| if (cpu_isar_feature(aa64_dcpodp, cpu)) { |
| define_one_arm_cp_reg(cpu, dcpodp_reg); |
| } |
| } |
| #endif /*CONFIG_USER_ONLY*/ |
| |
| /* |
| * If full MTE is enabled, add all of the system registers. |
| * If only "instructions available at EL0" are enabled, |
| * then define only a RAZ/WI version of PSTATE.TCO. |
| */ |
| if (cpu_isar_feature(aa64_mte, cpu)) { |
| define_arm_cp_regs(cpu, mte_reginfo); |
| define_arm_cp_regs(cpu, mte_el0_cacheop_reginfo); |
| } else if (cpu_isar_feature(aa64_mte_insn_reg, cpu)) { |
| define_arm_cp_regs(cpu, mte_tco_ro_reginfo); |
| define_arm_cp_regs(cpu, mte_el0_cacheop_reginfo); |
| } |
| #endif |
| |
| if (cpu_isar_feature(any_predinv, cpu)) { |
| define_arm_cp_regs(cpu, predinv_reginfo); |
| } |
| |
| if (cpu_isar_feature(any_ccidx, cpu)) { |
| define_arm_cp_regs(cpu, ccsidr2_reginfo); |
| } |
| |
| #ifndef CONFIG_USER_ONLY |
| /* |
| * Register redirections and aliases must be done last, |
| * after the registers from the other extensions have been defined. |
| */ |
| if (arm_feature(env, ARM_FEATURE_EL2) && cpu_isar_feature(aa64_vh, cpu)) { |
| define_arm_vh_e2h_redirects_aliases(cpu); |
| } |
| #endif |
| } |
| |
| /* Sort alphabetically by type name, except for "any". */ |
| static gint arm_cpu_list_compare(gconstpointer a, gconstpointer b) |
| { |
| ObjectClass *class_a = (ObjectClass *)a; |
| ObjectClass *class_b = (ObjectClass *)b; |
| const char *name_a, *name_b; |
| |
| name_a = object_class_get_name(class_a); |
| name_b = object_class_get_name(class_b); |
| if (strcmp(name_a, "any-" TYPE_ARM_CPU) == 0) { |
| return 1; |
| } else if (strcmp(name_b, "any-" TYPE_ARM_CPU) == 0) { |
| return -1; |
| } else { |
| return strcmp(name_a, name_b); |
| } |
| } |
| |
| static void arm_cpu_list_entry(gpointer data, gpointer user_data) |
| { |
| ObjectClass *oc = data; |
| const char *typename; |
| char *name; |
| |
| typename = object_class_get_name(oc); |
| name = g_strndup(typename, strlen(typename) - strlen("-" TYPE_ARM_CPU)); |
| qemu_printf(" %s\n", name); |
| g_free(name); |
| } |
| |
| void arm_cpu_list(void) |
| { |
| GSList *list; |
| |
| list = object_class_get_list(TYPE_ARM_CPU, false); |
| list = g_slist_sort(list, arm_cpu_list_compare); |
| qemu_printf("Available CPUs:\n"); |
| g_slist_foreach(list, arm_cpu_list_entry, NULL); |
| g_slist_free(list); |
| } |
| |
| static void arm_cpu_add_definition(gpointer data, gpointer user_data) |
| { |
| ObjectClass *oc = data; |
| CpuDefinitionInfoList **cpu_list = user_data; |
| CpuDefinitionInfo *info; |
| const char *typename; |
| |
| typename = object_class_get_name(oc); |
| info = g_malloc0(sizeof(*info)); |
| info->name = g_strndup(typename, |
| strlen(typename) - strlen("-" TYPE_ARM_CPU)); |
| info->q_typename = g_strdup(typename); |
| |
| QAPI_LIST_PREPEND(*cpu_list, info); |
| } |
| |
| CpuDefinitionInfoList *qmp_query_cpu_definitions(Error **errp) |
| { |
| CpuDefinitionInfoList *cpu_list = NULL; |
| GSList *list; |
| |
| list = object_class_get_list(TYPE_ARM_CPU, false); |
| g_slist_foreach(list, arm_cpu_add_definition, &cpu_list); |
| g_slist_free(list); |
| |
| return cpu_list; |
| } |
| |
| static void add_cpreg_to_hashtable(ARMCPU *cpu, const ARMCPRegInfo *r, |
| void *opaque, int state, int secstate, |
| int crm, int opc1, int opc2, |
| const char *name) |
| { |
| /* Private utility function for define_one_arm_cp_reg_with_opaque(): |
| * add a single reginfo struct to the hash table. |
| */ |
| uint32_t *key = g_new(uint32_t, 1); |
| ARMCPRegInfo *r2 = g_memdup(r, sizeof(ARMCPRegInfo)); |
| int is64 = (r->type & ARM_CP_64BIT) ? 1 : 0; |
| int ns = (secstate & ARM_CP_SECSTATE_NS) ? 1 : 0; |
| |
| r2->name = g_strdup(name); |
| /* Reset the secure state to the specific incoming state. This is |
| * necessary as the register may have been defined with both states. |
| */ |
| r2->secure = secstate; |
| |
| if (r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]) { |
| /* Register is banked (using both entries in array). |
| * Overwriting fieldoffset as the array is only used to define |
| * banked registers but later only fieldoffset is used. |
| */ |
| r2->fieldoffset = r->bank_fieldoffsets[ns]; |
| } |
| |
| if (state == ARM_CP_STATE_AA32) { |
| if (r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1]) { |
| /* If the register is banked then we don't need to migrate or |
| * reset the 32-bit instance in certain cases: |
| * |
| * 1) If the register has both 32-bit and 64-bit instances then we |
| * can count on the 64-bit instance taking care of the |
| * non-secure bank. |
| * 2) If ARMv8 is enabled then we can count on a 64-bit version |
| * taking care of the secure bank. This requires that separate |
| * 32 and 64-bit definitions are provided. |
| */ |
| if ((r->state == ARM_CP_STATE_BOTH && ns) || |
| (arm_feature(&cpu->env, ARM_FEATURE_V8) && !ns)) { |
| r2->type |= ARM_CP_ALIAS; |
| } |
| } else if ((secstate != r->secure) && !ns) { |
| /* The register is not banked so we only want to allow migration of |
| * the non-secure instance. |
| */ |
| r2->type |= ARM_CP_ALIAS; |
| } |
| |
| if (r->state == ARM_CP_STATE_BOTH) { |
| /* We assume it is a cp15 register if the .cp field is left unset. |
| */ |
| if (r2->cp == 0) { |
| r2->cp = 15; |
| } |
| |
| #ifdef HOST_WORDS_BIGENDIAN |
| if (r2->fieldoffset) { |
| r2->fieldoffset += sizeof(uint32_t); |
| } |
| #endif |
| } |
| } |
| if (state == ARM_CP_STATE_AA64) { |
| /* To allow abbreviation of ARMCPRegInfo |
| * definitions, we treat cp == 0 as equivalent to |
| * the value for "standard guest-visible sysreg". |
| * STATE_BOTH definitions are also always "standard |
| * sysreg" in their AArch64 view (the .cp value may |
| * be non-zero for the benefit of the AArch32 view). |
| */ |
| if (r->cp == 0 || r->state == ARM_CP_STATE_BOTH) { |
| r2->cp = CP_REG_ARM64_SYSREG_CP; |
| } |
| *key = ENCODE_AA64_CP_REG(r2->cp, r2->crn, crm, |
| r2->opc0, opc1, opc2); |
| } else { |
| *key = ENCODE_CP_REG(r2->cp, is64, ns, r2->crn, crm, opc1, opc2); |
| } |
| if (opaque) { |
| r2->opaque = opaque; |
| } |
| /* reginfo passed to helpers is correct for the actual access, |
| * and is never ARM_CP_STATE_BOTH: |
| */ |
| r2->state = state; |
| /* Make sure reginfo passed to helpers for wildcarded regs |
| * has the correct crm/opc1/opc2 for this reg, not CP_ANY: |
| */ |
| r2->crm = crm; |
| r2->opc1 = opc1; |
| r2->opc2 = opc2; |
| /* By convention, for wildcarded registers only the first |
| * entry is used for migration; the others are marked as |
| * ALIAS so we don't try to transfer the register |
| * multiple times. Special registers (ie NOP/WFI) are |
| * never migratable and not even raw-accessible. |
| */ |
| if ((r->type & ARM_CP_SPECIAL)) { |
| r2->type |= ARM_CP_NO_RAW; |
| } |
| if (((r->crm == CP_ANY) && crm != 0) || |
| ((r->opc1 == CP_ANY) && opc1 != 0) || |
| ((r->opc2 == CP_ANY) && opc2 != 0)) { |
| r2->type |= ARM_CP_ALIAS | ARM_CP_NO_GDB; |
| } |
| |
| /* Check that raw accesses are either forbidden or handled. Note that |
| * we can't assert this earlier because the setup of fieldoffset for |
| * banked registers has to be done first. |
| */ |
| if (!(r2->type & ARM_CP_NO_RAW)) { |
| assert(!raw_accessors_invalid(r2)); |
| } |
| |
| /* Overriding of an existing definition must be explicitly |
| * requested. |
| */ |
| if (!(r->type & ARM_CP_OVERRIDE)) { |
| ARMCPRegInfo *oldreg; |
| oldreg = g_hash_table_lookup(cpu->cp_regs, key); |
| if (oldreg && !(oldreg->type & ARM_CP_OVERRIDE)) { |
| fprintf(stderr, "Register redefined: cp=%d %d bit " |
| "crn=%d crm=%d opc1=%d opc2=%d, " |
| "was %s, now %s\n", r2->cp, 32 + 32 * is64, |
| r2->crn, r2->crm, r2->opc1, r2->opc2, |
| oldreg->name, r2->name); |
| g_assert_not_reached(); |
| } |
| } |
| g_hash_table_insert(cpu->cp_regs, key, r2); |
| } |
| |
| |
| void define_one_arm_cp_reg_with_opaque(ARMCPU *cpu, |
| const ARMCPRegInfo *r, void *opaque) |
| { |
| /* Define implementations of coprocessor registers. |
| * We store these in a hashtable because typically |
| * there are less than 150 registers in a space which |
| * is 16*16*16*8*8 = 262144 in size. |
| * Wildcarding is supported for the crm, opc1 and opc2 fields. |
| * If a register is defined twice then the second definition is |
| * used, so this can be used to define some generic registers and |
| * then override them with implementation specific variations. |
| * At least one of the original and the second definition should |
| * include ARM_CP_OVERRIDE in its type bits -- this is just a guard |
| * against accidental use. |
| * |
| * The state field defines whether the register is to be |
| * visible in the AArch32 or AArch64 execution state. If the |
| * state is set to ARM_CP_STATE_BOTH then we synthesise a |
| * reginfo structure for the AArch32 view, which sees the lower |
| * 32 bits of the 64 bit register. |
| * |
| * Only registers visible in AArch64 may set r->opc0; opc0 cannot |
| * be wildcarded. AArch64 registers are always considered to be 64 |
| * bits; the ARM_CP_64BIT* flag applies only to the AArch32 view of |
| * the register, if any. |
| */ |
| int crm, opc1, opc2, state; |
| int crmmin = (r->crm == CP_ANY) ? 0 : r->crm; |
| int crmmax = (r->crm == CP_ANY) ? 15 : r->crm; |
| int opc1min = (r->opc1 == CP_ANY) ? 0 : r->opc1; |
| int opc1max = (r->opc1 == CP_ANY) ? 7 : r->opc1; |
| int opc2min = (r->opc2 == CP_ANY) ? 0 : r->opc2; |
| int opc2max = (r->opc2 == CP_ANY) ? 7 : r->opc2; |
| /* 64 bit registers have only CRm and Opc1 fields */ |
| assert(!((r->type & ARM_CP_64BIT) && (r->opc2 || r->crn))); |
| /* op0 only exists in the AArch64 encodings */ |
| assert((r->state != ARM_CP_STATE_AA32) || (r->opc0 == 0)); |
| /* AArch64 regs are all 64 bit so ARM_CP_64BIT is meaningless */ |
| assert((r->state != ARM_CP_STATE_AA64) || !(r->type & ARM_CP_64BIT)); |
| /* |
| * This API is only for Arm's system coprocessors (14 and 15) or |
| * (M-profile or v7A-and-earlier only) for implementation defined |
| * coprocessors in the range 0..7. Our decode assumes this, since |
| * 8..13 can be used for other insns including VFP and Neon. See |
| * valid_cp() in translate.c. Assert here that we haven't tried |
| * to use an invalid coprocessor number. |
| */ |
| switch (r->state) { |
| case ARM_CP_STATE_BOTH: |
| /* 0 has a special meaning, but otherwise the same rules as AA32. */ |
| if (r->cp == 0) { |
| break; |
| } |
| /* fall through */ |
| case ARM_CP_STATE_AA32: |
| if (arm_feature(&cpu->env, ARM_FEATURE_V8) && |
| !arm_feature(&cpu->env, ARM_FEATURE_M)) { |
| assert(r->cp >= 14 && r->cp <= 15); |
| } else { |
| assert(r->cp < 8 || (r->cp >= 14 && r->cp <= 15)); |
| } |
| break; |
| case ARM_CP_STATE_AA64: |
| assert(r->cp == 0 || r->cp == CP_REG_ARM64_SYSREG_CP); |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| /* The AArch64 pseudocode CheckSystemAccess() specifies that op1 |
| * encodes a minimum access level for the register. We roll this |
| * runtime check into our general permission check code, so check |
| * here that the reginfo's specified permissions are strict enough |
| * to encompass the generic architectural permission check. |
| */ |
| if (r->state != ARM_CP_STATE_AA32) { |
| int mask = 0; |
| switch (r->opc1) { |
| case 0: |
| /* min_EL EL1, but some accessible to EL0 via kernel ABI */ |
| mask = PL0U_R | PL1_RW; |
| break; |
| case 1: case 2: |
| /* min_EL EL1 */ |
| mask = PL1_RW; |
| break; |
| case 3: |
| /* min_EL EL0 */ |
| mask = PL0_RW; |
| break; |
| case 4: |
| case 5: |
| /* min_EL EL2 */ |
| mask = PL2_RW; |
| break; |
| case 6: |
| /* min_EL EL3 */ |
| mask = PL3_RW; |
| break; |
| case 7: |
| /* min_EL EL1, secure mode only (we don't check the latter) */ |
| mask = PL1_RW; |
| break; |
| default: |
| /* broken reginfo with out-of-range opc1 */ |
| assert(false); |
| break; |
| } |
| /* assert our permissions are not too lax (stricter is fine) */ |
| assert((r->access & ~mask) == 0); |
| } |
| |
| /* Check that the register definition has enough info to handle |
| * reads and writes if they are permitted. |
| */ |
| if (!(r->type & (ARM_CP_SPECIAL|ARM_CP_CONST))) { |
| if (r->access & PL3_R) { |
| assert((r->fieldoffset || |
| (r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1])) || |
| r->readfn); |
| } |
| if (r->access & PL3_W) { |
| assert((r->fieldoffset || |
| (r->bank_fieldoffsets[0] && r->bank_fieldoffsets[1])) || |
| r->writefn); |
| } |
| } |
| /* Bad type field probably means missing sentinel at end of reg list */ |
| assert(cptype_valid(r->type)); |
| for (crm = crmmin; crm <= crmmax; crm++) { |
| for (opc1 = opc1min; opc1 <= opc1max; opc1++) { |
| for (opc2 = opc2min; opc2 <= opc2max; opc2++) { |
| for (state = ARM_CP_STATE_AA32; |
| state <= ARM_CP_STATE_AA64; state++) { |
| if (r->state != state && r->state != ARM_CP_STATE_BOTH) { |
| continue; |
| } |
| if (state == ARM_CP_STATE_AA32) { |
| /* Under AArch32 CP registers can be common |
| * (same for secure and non-secure world) or banked. |
| */ |
| char *name; |
| |
| switch (r->secure) { |
| case ARM_CP_SECSTATE_S: |
| case ARM_CP_SECSTATE_NS: |
| add_cpreg_to_hashtable(cpu, r, opaque, state, |
| r->secure, crm, opc1, opc2, |
| r->name); |
| break; |
| default: |
| name = g_strdup_printf("%s_S", r->name); |
| add_cpreg_to_hashtable(cpu, r, opaque, state, |
| ARM_CP_SECSTATE_S, |
| crm, opc1, opc2, name); |
| g_free(name); |
| add_cpreg_to_hashtable(cpu, r, opaque, state, |
| ARM_CP_SECSTATE_NS, |
| crm, opc1, opc2, r->name); |
| break; |
| } |
| } else { |
| /* AArch64 registers get mapped to non-secure instance |
| * of AArch32 */ |
| add_cpreg_to_hashtable(cpu, r, opaque, state, |
| ARM_CP_SECSTATE_NS, |
| crm, opc1, opc2, r->name); |
| } |
| } |
| } |
| } |
| } |
| } |
| |
| void define_arm_cp_regs_with_opaque(ARMCPU *cpu, |
| const ARMCPRegInfo *regs, void *opaque) |
| { |
| /* Define a whole list of registers */ |
| const ARMCPRegInfo *r; |
| for (r = regs; r->type != ARM_CP_SENTINEL; r++) { |
| define_one_arm_cp_reg_with_opaque(cpu, r, opaque); |
| } |
| } |
| |
| /* |
| * Modify ARMCPRegInfo for access from userspace. |
| * |
| * This is a data driven modification directed by |
| * ARMCPRegUserSpaceInfo. All registers become ARM_CP_CONST as |
| * user-space cannot alter any values and dynamic values pertaining to |
| * execution state are hidden from user space view anyway. |
| */ |
| void modify_arm_cp_regs(ARMCPRegInfo *regs, const ARMCPRegUserSpaceInfo *mods) |
| { |
| const ARMCPRegUserSpaceInfo *m; |
| ARMCPRegInfo *r; |
| |
| for (m = mods; m->name; m++) { |
| GPatternSpec *pat = NULL; |
| if (m->is_glob) { |
| pat = g_pattern_spec_new(m->name); |
| } |
| for (r = regs; r->type != ARM_CP_SENTINEL; r++) { |
| if (pat && g_pattern_match_string(pat, r->name)) { |
| r->type = ARM_CP_CONST; |
| r->access = PL0U_R; |
| r->resetvalue = 0; |
| /* continue */ |
| } else if (strcmp(r->name, m->name) == 0) { |
| r->type = ARM_CP_CONST; |
| r->access = PL0U_R; |
| r->resetvalue &= m->exported_bits; |
| r->resetvalue |= m->fixed_bits; |
| break; |
| } |
| } |
| if (pat) { |
| g_pattern_spec_free(pat); |
| } |
| } |
| } |
| |
| const ARMCPRegInfo *get_arm_cp_reginfo(GHashTable *cpregs, uint32_t encoded_cp) |
| { |
| return g_hash_table_lookup(cpregs, &encoded_cp); |
| } |
| |
| void arm_cp_write_ignore(CPUARMState *env, const ARMCPRegInfo *ri, |
| uint64_t value) |
| { |
| /* Helper coprocessor write function for write-ignore registers */ |
| } |
| |
| uint64_t arm_cp_read_zero(CPUARMState *env, const ARMCPRegInfo *ri) |
| { |
| /* Helper coprocessor write function for read-as-zero registers */ |
| return 0; |
| } |
| |
| void arm_cp_reset_ignore(CPUARMState *env, const ARMCPRegInfo *opaque) |
| { |
| /* Helper coprocessor reset function for do-nothing-on-reset registers */ |
| } |
| |
| static int bad_mode_switch(CPUARMState *env, int mode, CPSRWriteType write_type) |
| { |
| /* Return true if it is not valid for us to switch to |
| * this CPU mode (ie all the UNPREDICTABLE cases in |
| * the ARM ARM CPSRWriteByInstr pseudocode). |
| */ |
| |
| /* Changes to or from Hyp via MSR and CPS are illegal. */ |
| if (write_type == CPSRWriteByInstr && |
| ((env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_HYP || |
| mode == ARM_CPU_MODE_HYP)) { |
| return 1; |
| } |
| |
| switch (mode) { |
| case ARM_CPU_MODE_USR: |
| return 0; |
| case ARM_CPU_MODE_SYS: |
| case ARM_CPU_MODE_SVC: |
| case ARM_CPU_MODE_ABT: |
| case ARM_CPU_MODE_UND: |
| case ARM_CPU_MODE_IRQ: |
| case ARM_CPU_MODE_FIQ: |
| /* Note that we don't implement the IMPDEF NSACR.RFR which in v7 |
| * allows FIQ mode to be Secure-only. (In v8 this doesn't exist.) |
| */ |
| /* If HCR.TGE is set then changes from Monitor to NS PL1 via MSR |
| * and CPS are treated as illegal mode changes. |
| */ |
| if (write_type == CPSRWriteByInstr && |
| (env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_MON && |
| (arm_hcr_el2_eff(env) & HCR_TGE)) { |
| return 1; |
| } |
| return 0; |
| case ARM_CPU_MODE_HYP: |
| return !arm_is_el2_enabled(env) || arm_current_el(env) < 2; |
| case ARM_CPU_MODE_MON: |
| return arm_current_el(env) < 3; |
| default: |
| return 1; |
| } |
| } |
| |
| uint32_t cpsr_read(CPUARMState *env) |
| { |
| int ZF; |
| ZF = (env->ZF == 0); |
| return env->uncached_cpsr | (env->NF & 0x80000000) | (ZF << 30) | |
| (env->CF << 29) | ((env->VF & 0x80000000) >> 3) | (env->QF << 27) |
| | (env->thumb << 5) | ((env->condexec_bits & 3) << 25) |
| | ((env->condexec_bits & 0xfc) << 8) |
| | (env->GE << 16) | (env->daif & CPSR_AIF); |
| } |
| |
| void cpsr_write(CPUARMState *env, uint32_t val, uint32_t mask, |
| CPSRWriteType write_type) |
| { |
| uint32_t changed_daif; |
| bool rebuild_hflags = (write_type != CPSRWriteRaw) && |
| (mask & (CPSR_M | CPSR_E | CPSR_IL)); |
| |
| if (mask & CPSR_NZCV) { |
| env->ZF = (~val) & CPSR_Z; |
| env->NF = val; |
| env->CF = (val >> 29) & 1; |
| env->VF = (val << 3) & 0x80000000; |
| } |
| if (mask & CPSR_Q) |
| env->QF = ((val & CPSR_Q) != 0); |
| if (mask & CPSR_T) |
| env->thumb = ((val & CPSR_T) != 0); |
| if (mask & CPSR_IT_0_1) { |
| env->condexec_bits &= ~3; |
| env->condexec_bits |= (val >> 25) & 3; |
| } |
| if (mask & CPSR_IT_2_7) { |
| env->condexec_bits &= 3; |
| env->condexec_bits |= (val >> 8) & 0xfc; |
| } |
| if (mask & CPSR_GE) { |
| env->GE = (val >> 16) & 0xf; |
| } |
| |
| /* In a V7 implementation that includes the security extensions but does |
| * not include Virtualization Extensions the SCR.FW and SCR.AW bits control |
| * whether non-secure software is allowed to change the CPSR_F and CPSR_A |
| * bits respectively. |
| * |
| * In a V8 implementation, it is permitted for privileged software to |
| * change the CPSR A/F bits regardless of the SCR.AW/FW bits. |
| */ |
| if (write_type != CPSRWriteRaw && !arm_feature(env, ARM_FEATURE_V8) && |
| arm_feature(env, ARM_FEATURE_EL3) && |
| !arm_feature(env, ARM_FEATURE_EL2) && |
| !arm_is_secure(env)) { |
| |
| changed_daif = (env->daif ^ val) & mask; |
| |
| if (changed_daif & CPSR_A) { |
| /* Check to see if we are allowed to change the masking of async |
| * abort exceptions from a non-secure state. |
| */ |
| if (!(env->cp15.scr_el3 & SCR_AW)) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "Ignoring attempt to switch CPSR_A flag from " |
| "non-secure world with SCR.AW bit clear\n"); |
| mask &= ~CPSR_A; |
| } |
| } |
| |
| if (changed_daif & CPSR_F) { |
| /* Check to see if we are allowed to change the masking of FIQ |
| * exceptions from a non-secure state. |
| */ |
| if (!(env->cp15.scr_el3 & SCR_FW)) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "Ignoring attempt to switch CPSR_F flag from " |
| "non-secure world with SCR.FW bit clear\n"); |
| mask &= ~CPSR_F; |
| } |
| |
| /* Check whether non-maskable FIQ (NMFI) support is enabled. |
| * If this bit is set software is not allowed to mask |
| * FIQs, but is allowed to set CPSR_F to 0. |
| */ |
| if ((A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_NMFI) && |
| (val & CPSR_F)) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "Ignoring attempt to enable CPSR_F flag " |
| "(non-maskable FIQ [NMFI] support enabled)\n"); |
| mask &= ~CPSR_F; |
| } |
| } |
| } |
| |
| env->daif &= ~(CPSR_AIF & mask); |
| env->daif |= val & CPSR_AIF & mask; |
| |
| if (write_type != CPSRWriteRaw && |
| ((env->uncached_cpsr ^ val) & mask & CPSR_M)) { |
| if ((env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_USR) { |
| /* Note that we can only get here in USR mode if this is a |
| * gdb stub write; for this case we follow the architectural |
| * behaviour for guest writes in USR mode of ignoring an attempt |
| * to switch mode. (Those are caught by translate.c for writes |
| * triggered by guest instructions.) |
| */ |
| mask &= ~CPSR_M; |
| } else if (bad_mode_switch(env, val & CPSR_M, write_type)) { |
| /* Attempt to switch to an invalid mode: this is UNPREDICTABLE in |
| * v7, and has defined behaviour in v8: |
| * + leave CPSR.M untouched |
| * + allow changes to the other CPSR fields |
| * + set PSTATE.IL |
| * For user changes via the GDB stub, we don't set PSTATE.IL, |
| * as this would be unnecessarily harsh for a user error. |
| */ |
| mask &= ~CPSR_M; |
| if (write_type != CPSRWriteByGDBStub && |
| arm_feature(env, ARM_FEATURE_V8)) { |
| mask |= CPSR_IL; |
| val |= CPSR_IL; |
| } |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "Illegal AArch32 mode switch attempt from %s to %s\n", |
| aarch32_mode_name(env->uncached_cpsr), |
| aarch32_mode_name(val)); |
| } else { |
| qemu_log_mask(CPU_LOG_INT, "%s %s to %s PC 0x%" PRIx32 "\n", |
| write_type == CPSRWriteExceptionReturn ? |
| "Exception return from AArch32" : |
| "AArch32 mode switch from", |
| aarch32_mode_name(env->uncached_cpsr), |
| aarch32_mode_name(val), env->regs[15]); |
| switch_mode(env, val & CPSR_M); |
| } |
| } |
| mask &= ~CACHED_CPSR_BITS; |
| env->uncached_cpsr = (env->uncached_cpsr & ~mask) | (val & mask); |
| if (rebuild_hflags) { |
| arm_rebuild_hflags(env); |
| } |
| } |
| |
| /* Sign/zero extend */ |
| uint32_t HELPER(sxtb16)(uint32_t x) |
| { |
| uint32_t res; |
| res = (uint16_t)(int8_t)x; |
| res |= (uint32_t)(int8_t)(x >> 16) << 16; |
| return res; |
| } |
| |
| static void handle_possible_div0_trap(CPUARMState *env, uintptr_t ra) |
| { |
| /* |
| * Take a division-by-zero exception if necessary; otherwise return |
| * to get the usual non-trapping division behaviour (result of 0) |
| */ |
| if (arm_feature(env, ARM_FEATURE_M) |
| && (env->v7m.ccr[env->v7m.secure] & R_V7M_CCR_DIV_0_TRP_MASK)) { |
| raise_exception_ra(env, EXCP_DIVBYZERO, 0, 1, ra); |
| } |
| } |
| |
| uint32_t HELPER(uxtb16)(uint32_t x) |
| { |
| uint32_t res; |
| res = (uint16_t)(uint8_t)x; |
| res |= (uint32_t)(uint8_t)(x >> 16) << 16; |
| return res; |
| } |
| |
| int32_t HELPER(sdiv)(CPUARMState *env, int32_t num, int32_t den) |
| { |
| if (den == 0) { |
| handle_possible_div0_trap(env, GETPC()); |
| return 0; |
| } |
| if (num == INT_MIN && den == -1) { |
| return INT_MIN; |
| } |
| return num / den; |
| } |
| |
| uint32_t HELPER(udiv)(CPUARMState *env, uint32_t num, uint32_t den) |
| { |
| if (den == 0) { |
| handle_possible_div0_trap(env, GETPC()); |
| return 0; |
| } |
| return num / den; |
| } |
| |
| uint32_t HELPER(rbit)(uint32_t x) |
| { |
| return revbit32(x); |
| } |
| |
| #ifdef CONFIG_USER_ONLY |
| |
| static void switch_mode(CPUARMState *env, int mode) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| |
| if (mode != ARM_CPU_MODE_USR) { |
| cpu_abort(CPU(cpu), "Tried to switch out of user mode\n"); |
| } |
| } |
| |
| uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, |
| uint32_t cur_el, bool secure) |
| { |
| return 1; |
| } |
| |
| void aarch64_sync_64_to_32(CPUARMState *env) |
| { |
| g_assert_not_reached(); |
| } |
| |
| #else |
| |
| static void switch_mode(CPUARMState *env, int mode) |
| { |
| int old_mode; |
| int i; |
| |
| old_mode = env->uncached_cpsr & CPSR_M; |
| if (mode == old_mode) |
| return; |
| |
| if (old_mode == ARM_CPU_MODE_FIQ) { |
| memcpy (env->fiq_regs, env->regs + 8, 5 * sizeof(uint32_t)); |
| memcpy (env->regs + 8, env->usr_regs, 5 * sizeof(uint32_t)); |
| } else if (mode == ARM_CPU_MODE_FIQ) { |
| memcpy (env->usr_regs, env->regs + 8, 5 * sizeof(uint32_t)); |
| memcpy (env->regs + 8, env->fiq_regs, 5 * sizeof(uint32_t)); |
| } |
| |
| i = bank_number(old_mode); |
| env->banked_r13[i] = env->regs[13]; |
| env->banked_spsr[i] = env->spsr; |
| |
| i = bank_number(mode); |
| env->regs[13] = env->banked_r13[i]; |
| env->spsr = env->banked_spsr[i]; |
| |
| env->banked_r14[r14_bank_number(old_mode)] = env->regs[14]; |
| env->regs[14] = env->banked_r14[r14_bank_number(mode)]; |
| } |
| |
| /* Physical Interrupt Target EL Lookup Table |
| * |
| * [ From ARM ARM section G1.13.4 (Table G1-15) ] |
| * |
| * The below multi-dimensional table is used for looking up the target |
| * exception level given numerous condition criteria. Specifically, the |
| * target EL is based on SCR and HCR routing controls as well as the |
| * currently executing EL and secure state. |
| * |
| * Dimensions: |
| * target_el_table[2][2][2][2][2][4] |
| * | | | | | +--- Current EL |
| * | | | | +------ Non-secure(0)/Secure(1) |
| * | | | +--------- HCR mask override |
| * | | +------------ SCR exec state control |
| * | +--------------- SCR mask override |
| * +------------------ 32-bit(0)/64-bit(1) EL3 |
| * |
| * The table values are as such: |
| * 0-3 = EL0-EL3 |
| * -1 = Cannot occur |
| * |
| * The ARM ARM target EL table includes entries indicating that an "exception |
| * is not taken". The two cases where this is applicable are: |
| * 1) An exception is taken from EL3 but the SCR does not have the exception |
| * routed to EL3. |
| * 2) An exception is taken from EL2 but the HCR does not have the exception |
| * routed to EL2. |
| * In these two cases, the below table contain a target of EL1. This value is |
| * returned as it is expected that the consumer of the table data will check |
| * for "target EL >= current EL" to ensure the exception is not taken. |
| * |
| * SCR HCR |
| * 64 EA AMO From |
| * BIT IRQ IMO Non-secure Secure |
| * EL3 FIQ RW FMO EL0 EL1 EL2 EL3 EL0 EL1 EL2 EL3 |
| */ |
| static const int8_t target_el_table[2][2][2][2][2][4] = { |
| {{{{/* 0 0 0 0 */{ 1, 1, 2, -1 },{ 3, -1, -1, 3 },}, |
| {/* 0 0 0 1 */{ 2, 2, 2, -1 },{ 3, -1, -1, 3 },},}, |
| {{/* 0 0 1 0 */{ 1, 1, 2, -1 },{ 3, -1, -1, 3 },}, |
| {/* 0 0 1 1 */{ 2, 2, 2, -1 },{ 3, -1, -1, 3 },},},}, |
| {{{/* 0 1 0 0 */{ 3, 3, 3, -1 },{ 3, -1, -1, 3 },}, |
| {/* 0 1 0 1 */{ 3, 3, 3, -1 },{ 3, -1, -1, 3 },},}, |
| {{/* 0 1 1 0 */{ 3, 3, 3, -1 },{ 3, -1, -1, 3 },}, |
| {/* 0 1 1 1 */{ 3, 3, 3, -1 },{ 3, -1, -1, 3 },},},},}, |
| {{{{/* 1 0 0 0 */{ 1, 1, 2, -1 },{ 1, 1, -1, 1 },}, |
| {/* 1 0 0 1 */{ 2, 2, 2, -1 },{ 2, 2, -1, 1 },},}, |
| {{/* 1 0 1 0 */{ 1, 1, 1, -1 },{ 1, 1, 1, 1 },}, |
| {/* 1 0 1 1 */{ 2, 2, 2, -1 },{ 2, 2, 2, 1 },},},}, |
| {{{/* 1 1 0 0 */{ 3, 3, 3, -1 },{ 3, 3, -1, 3 },}, |
| {/* 1 1 0 1 */{ 3, 3, 3, -1 },{ 3, 3, -1, 3 },},}, |
| {{/* 1 1 1 0 */{ 3, 3, 3, -1 },{ 3, 3, 3, 3 },}, |
| {/* 1 1 1 1 */{ 3, 3, 3, -1 },{ 3, 3, 3, 3 },},},},}, |
| }; |
| |
| /* |
| * Determine the target EL for physical exceptions |
| */ |
| uint32_t arm_phys_excp_target_el(CPUState *cs, uint32_t excp_idx, |
| uint32_t cur_el, bool secure) |
| { |
| CPUARMState *env = cs->env_ptr; |
| bool rw; |
| bool scr; |
| bool hcr; |
| int target_el; |
| /* Is the highest EL AArch64? */ |
| bool is64 = arm_feature(env, ARM_FEATURE_AARCH64); |
| uint64_t hcr_el2; |
| |
| if (arm_feature(env, ARM_FEATURE_EL3)) { |
| rw = ((env->cp15.scr_el3 & SCR_RW) == SCR_RW); |
| } else { |
| /* Either EL2 is the highest EL (and so the EL2 register width |
| * is given by is64); or there is no EL2 or EL3, in which case |
| * the value of 'rw' does not affect the table lookup anyway. |
| */ |
| rw = is64; |
| } |
| |
| hcr_el2 = arm_hcr_el2_eff(env); |
| switch (excp_idx) { |
| case EXCP_IRQ: |
| scr = ((env->cp15.scr_el3 & SCR_IRQ) == SCR_IRQ); |
| hcr = hcr_el2 & HCR_IMO; |
| break; |
| case EXCP_FIQ: |
| scr = ((env->cp15.scr_el3 & SCR_FIQ) == SCR_FIQ); |
| hcr = hcr_el2 & HCR_FMO; |
| break; |
| default: |
| scr = ((env->cp15.scr_el3 & SCR_EA) == SCR_EA); |
| hcr = hcr_el2 & HCR_AMO; |
| break; |
| }; |
| |
| /* |
| * For these purposes, TGE and AMO/IMO/FMO both force the |
| * interrupt to EL2. Fold TGE into the bit extracted above. |
| */ |
| hcr |= (hcr_el2 & HCR_TGE) != 0; |
| |
| /* Perform a table-lookup for the target EL given the current state */ |
| target_el = target_el_table[is64][scr][rw][hcr][secure][cur_el]; |
| |
| assert(target_el > 0); |
| |
| return target_el; |
| } |
| |
| void arm_log_exception(CPUState *cs) |
| { |
| int idx = cs->exception_index; |
| |
| if (qemu_loglevel_mask(CPU_LOG_INT)) { |
| const char *exc = NULL; |
| static const char * const excnames[] = { |
| [EXCP_UDEF] = "Undefined Instruction", |
| [EXCP_SWI] = "SVC", |
| [EXCP_PREFETCH_ABORT] = "Prefetch Abort", |
| [EXCP_DATA_ABORT] = "Data Abort", |
| [EXCP_IRQ] = "IRQ", |
| [EXCP_FIQ] = "FIQ", |
| [EXCP_BKPT] = "Breakpoint", |
| [EXCP_EXCEPTION_EXIT] = "QEMU v7M exception exit", |
| [EXCP_KERNEL_TRAP] = "QEMU intercept of kernel commpage", |
| [EXCP_HVC] = "Hypervisor Call", |
| [EXCP_HYP_TRAP] = "Hypervisor Trap", |
| [EXCP_SMC] = "Secure Monitor Call", |
| [EXCP_VIRQ] = "Virtual IRQ", |
| [EXCP_VFIQ] = "Virtual FIQ", |
| [EXCP_SEMIHOST] = "Semihosting call", |
| [EXCP_NOCP] = "v7M NOCP UsageFault", |
| [EXCP_INVSTATE] = "v7M INVSTATE UsageFault", |
| [EXCP_STKOF] = "v8M STKOF UsageFault", |
| [EXCP_LAZYFP] = "v7M exception during lazy FP stacking", |
| [EXCP_LSERR] = "v8M LSERR UsageFault", |
| [EXCP_UNALIGNED] = "v7M UNALIGNED UsageFault", |
| [EXCP_DIVBYZERO] = "v7M DIVBYZERO UsageFault", |
| }; |
| |
| if (idx >= 0 && idx < ARRAY_SIZE(excnames)) { |
| exc = excnames[idx]; |
| } |
| if (!exc) { |
| exc = "unknown"; |
| } |
| qemu_log_mask(CPU_LOG_INT, "Taking exception %d [%s] on CPU %d\n", |
| idx, exc, cs->cpu_index); |
| } |
| } |
| |
| /* |
| * Function used to synchronize QEMU's AArch64 register set with AArch32 |
| * register set. This is necessary when switching between AArch32 and AArch64 |
| * execution state. |
| */ |
| void aarch64_sync_32_to_64(CPUARMState *env) |
| { |
| int i; |
| uint32_t mode = env->uncached_cpsr & CPSR_M; |
| |
| /* We can blanket copy R[0:7] to X[0:7] */ |
| for (i = 0; i < 8; i++) { |
| env->xregs[i] = env->regs[i]; |
| } |
| |
| /* |
| * Unless we are in FIQ mode, x8-x12 come from the user registers r8-r12. |
| * Otherwise, they come from the banked user regs. |
| */ |
| if (mode == ARM_CPU_MODE_FIQ) { |
| for (i = 8; i < 13; i++) { |
| env->xregs[i] = env->usr_regs[i - 8]; |
| } |
| } else { |
| for (i = 8; i < 13; i++) { |
| env->xregs[i] = env->regs[i]; |
| } |
| } |
| |
| /* |
| * Registers x13-x23 are the various mode SP and FP registers. Registers |
| * r13 and r14 are only copied if we are in that mode, otherwise we copy |
| * from the mode banked register. |
| */ |
| if (mode == ARM_CPU_MODE_USR || mode == ARM_CPU_MODE_SYS) { |
| env->xregs[13] = env->regs[13]; |
| env->xregs[14] = env->regs[14]; |
| } else { |
| env->xregs[13] = env->banked_r13[bank_number(ARM_CPU_MODE_USR)]; |
| /* HYP is an exception in that it is copied from r14 */ |
| if (mode == ARM_CPU_MODE_HYP) { |
| env->xregs[14] = env->regs[14]; |
| } else { |
| env->xregs[14] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_USR)]; |
| } |
| } |
| |
| if (mode == ARM_CPU_MODE_HYP) { |
| env->xregs[15] = env->regs[13]; |
| } else { |
| env->xregs[15] = env->banked_r13[bank_number(ARM_CPU_MODE_HYP)]; |
| } |
| |
| if (mode == ARM_CPU_MODE_IRQ) { |
| env->xregs[16] = env->regs[14]; |
| env->xregs[17] = env->regs[13]; |
| } else { |
| env->xregs[16] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_IRQ)]; |
| env->xregs[17] = env->banked_r13[bank_number(ARM_CPU_MODE_IRQ)]; |
| } |
| |
| if (mode == ARM_CPU_MODE_SVC) { |
| env->xregs[18] = env->regs[14]; |
| env->xregs[19] = env->regs[13]; |
| } else { |
| env->xregs[18] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_SVC)]; |
| env->xregs[19] = env->banked_r13[bank_number(ARM_CPU_MODE_SVC)]; |
| } |
| |
| if (mode == ARM_CPU_MODE_ABT) { |
| env->xregs[20] = env->regs[14]; |
| env->xregs[21] = env->regs[13]; |
| } else { |
| env->xregs[20] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_ABT)]; |
| env->xregs[21] = env->banked_r13[bank_number(ARM_CPU_MODE_ABT)]; |
| } |
| |
| if (mode == ARM_CPU_MODE_UND) { |
| env->xregs[22] = env->regs[14]; |
| env->xregs[23] = env->regs[13]; |
| } else { |
| env->xregs[22] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_UND)]; |
| env->xregs[23] = env->banked_r13[bank_number(ARM_CPU_MODE_UND)]; |
| } |
| |
| /* |
| * Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ |
| * mode, then we can copy from r8-r14. Otherwise, we copy from the |
| * FIQ bank for r8-r14. |
| */ |
| if (mode == ARM_CPU_MODE_FIQ) { |
| for (i = 24; i < 31; i++) { |
| env->xregs[i] = env->regs[i - 16]; /* X[24:30] <- R[8:14] */ |
| } |
| } else { |
| for (i = 24; i < 29; i++) { |
| env->xregs[i] = env->fiq_regs[i - 24]; |
| } |
| env->xregs[29] = env->banked_r13[bank_number(ARM_CPU_MODE_FIQ)]; |
| env->xregs[30] = env->banked_r14[r14_bank_number(ARM_CPU_MODE_FIQ)]; |
| } |
| |
| env->pc = env->regs[15]; |
| } |
| |
| /* |
| * Function used to synchronize QEMU's AArch32 register set with AArch64 |
| * register set. This is necessary when switching between AArch32 and AArch64 |
| * execution state. |
| */ |
| void aarch64_sync_64_to_32(CPUARMState *env) |
| { |
| int i; |
| uint32_t mode = env->uncached_cpsr & CPSR_M; |
| |
| /* We can blanket copy X[0:7] to R[0:7] */ |
| for (i = 0; i < 8; i++) { |
| env->regs[i] = env->xregs[i]; |
| } |
| |
| /* |
| * Unless we are in FIQ mode, r8-r12 come from the user registers x8-x12. |
| * Otherwise, we copy x8-x12 into the banked user regs. |
| */ |
| if (mode == ARM_CPU_MODE_FIQ) { |
| for (i = 8; i < 13; i++) { |
| env->usr_regs[i - 8] = env->xregs[i]; |
| } |
| } else { |
| for (i = 8; i < 13; i++) { |
| env->regs[i] = env->xregs[i]; |
| } |
| } |
| |
| /* |
| * Registers r13 & r14 depend on the current mode. |
| * If we are in a given mode, we copy the corresponding x registers to r13 |
| * and r14. Otherwise, we copy the x register to the banked r13 and r14 |
| * for the mode. |
| */ |
| if (mode == ARM_CPU_MODE_USR || mode == ARM_CPU_MODE_SYS) { |
| env->regs[13] = env->xregs[13]; |
| env->regs[14] = env->xregs[14]; |
| } else { |
| env->banked_r13[bank_number(ARM_CPU_MODE_USR)] = env->xregs[13]; |
| |
| /* |
| * HYP is an exception in that it does not have its own banked r14 but |
| * shares the USR r14 |
| */ |
| if (mode == ARM_CPU_MODE_HYP) { |
| env->regs[14] = env->xregs[14]; |
| } else { |
| env->banked_r14[r14_bank_number(ARM_CPU_MODE_USR)] = env->xregs[14]; |
| } |
| } |
| |
| if (mode == ARM_CPU_MODE_HYP) { |
| env->regs[13] = env->xregs[15]; |
| } else { |
| env->banked_r13[bank_number(ARM_CPU_MODE_HYP)] = env->xregs[15]; |
| } |
| |
| if (mode == ARM_CPU_MODE_IRQ) { |
| env->regs[14] = env->xregs[16]; |
| env->regs[13] = env->xregs[17]; |
| } else { |
| env->banked_r14[r14_bank_number(ARM_CPU_MODE_IRQ)] = env->xregs[16]; |
| env->banked_r13[bank_number(ARM_CPU_MODE_IRQ)] = env->xregs[17]; |
| } |
| |
| if (mode == ARM_CPU_MODE_SVC) { |
| env->regs[14] = env->xregs[18]; |
| env->regs[13] = env->xregs[19]; |
| } else { |
| env->banked_r14[r14_bank_number(ARM_CPU_MODE_SVC)] = env->xregs[18]; |
| env->banked_r13[bank_number(ARM_CPU_MODE_SVC)] = env->xregs[19]; |
| } |
| |
| if (mode == ARM_CPU_MODE_ABT) { |
| env->regs[14] = env->xregs[20]; |
| env->regs[13] = env->xregs[21]; |
| } else { |
| env->banked_r14[r14_bank_number(ARM_CPU_MODE_ABT)] = env->xregs[20]; |
| env->banked_r13[bank_number(ARM_CPU_MODE_ABT)] = env->xregs[21]; |
| } |
| |
| if (mode == ARM_CPU_MODE_UND) { |
| env->regs[14] = env->xregs[22]; |
| env->regs[13] = env->xregs[23]; |
| } else { |
| env->banked_r14[r14_bank_number(ARM_CPU_MODE_UND)] = env->xregs[22]; |
| env->banked_r13[bank_number(ARM_CPU_MODE_UND)] = env->xregs[23]; |
| } |
| |
| /* Registers x24-x30 are mapped to r8-r14 in FIQ mode. If we are in FIQ |
| * mode, then we can copy to r8-r14. Otherwise, we copy to the |
| * FIQ bank for r8-r14. |
| */ |
| if (mode == ARM_CPU_MODE_FIQ) { |
| for (i = 24; i < 31; i++) { |
| env->regs[i - 16] = env->xregs[i]; /* X[24:30] -> R[8:14] */ |
| } |
| } else { |
| for (i = 24; i < 29; i++) { |
| env->fiq_regs[i - 24] = env->xregs[i]; |
| } |
| env->banked_r13[bank_number(ARM_CPU_MODE_FIQ)] = env->xregs[29]; |
| env->banked_r14[r14_bank_number(ARM_CPU_MODE_FIQ)] = env->xregs[30]; |
| } |
| |
| env->regs[15] = env->pc; |
| } |
| |
| static void take_aarch32_exception(CPUARMState *env, int new_mode, |
| uint32_t mask, uint32_t offset, |
| uint32_t newpc) |
| { |
| int new_el; |
| |
| /* Change the CPU state so as to actually take the exception. */ |
| switch_mode(env, new_mode); |
| |
| /* |
| * For exceptions taken to AArch32 we must clear the SS bit in both |
| * PSTATE and in the old-state value we save to SPSR_<mode>, so zero it now. |
| */ |
| env->pstate &= ~PSTATE_SS; |
| env->spsr = cpsr_read(env); |
| /* Clear IT bits. */ |
| env->condexec_bits = 0; |
| /* Switch to the new mode, and to the correct instruction set. */ |
| env->uncached_cpsr = (env->uncached_cpsr & ~CPSR_M) | new_mode; |
| |
| /* This must be after mode switching. */ |
| new_el = arm_current_el(env); |
| |
| /* Set new mode endianness */ |
| env->uncached_cpsr &= ~CPSR_E; |
| if (env->cp15.sctlr_el[new_el] & SCTLR_EE) { |
| env->uncached_cpsr |= CPSR_E; |
| } |
| /* J and IL must always be cleared for exception entry */ |
| env->uncached_cpsr &= ~(CPSR_IL | CPSR_J); |
| env->daif |= mask; |
| |
| if (cpu_isar_feature(aa32_ssbs, env_archcpu(env))) { |
| if (env->cp15.sctlr_el[new_el] & SCTLR_DSSBS_32) { |
| env->uncached_cpsr |= CPSR_SSBS; |
| } else { |
| env->uncached_cpsr &= ~CPSR_SSBS; |
| } |
| } |
| |
| if (new_mode == ARM_CPU_MODE_HYP) { |
| env->thumb = (env->cp15.sctlr_el[2] & SCTLR_TE) != 0; |
| env->elr_el[2] = env->regs[15]; |
| } else { |
| /* CPSR.PAN is normally preserved preserved unless... */ |
| if (cpu_isar_feature(aa32_pan, env_archcpu(env))) { |
| switch (new_el) { |
| case 3: |
| if (!arm_is_secure_below_el3(env)) { |
| /* ... the target is EL3, from non-secure state. */ |
| env->uncached_cpsr &= ~CPSR_PAN; |
| break; |
| } |
| /* ... the target is EL3, from secure state ... */ |
| /* fall through */ |
| case 1: |
| /* ... the target is EL1 and SCTLR.SPAN is 0. */ |
| if (!(env->cp15.sctlr_el[new_el] & SCTLR_SPAN)) { |
| env->uncached_cpsr |= CPSR_PAN; |
| } |
| break; |
| } |
| } |
| /* |
| * this is a lie, as there was no c1_sys on V4T/V5, but who cares |
| * and we should just guard the thumb mode on V4 |
| */ |
| if (arm_feature(env, ARM_FEATURE_V4T)) { |
| env->thumb = |
| (A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_TE) != 0; |
| } |
| env->regs[14] = env->regs[15] + offset; |
| } |
| env->regs[15] = newpc; |
| arm_rebuild_hflags(env); |
| } |
| |
| static void arm_cpu_do_interrupt_aarch32_hyp(CPUState *cs) |
| { |
| /* |
| * Handle exception entry to Hyp mode; this is sufficiently |
| * different to entry to other AArch32 modes that we handle it |
| * separately here. |
| * |
| * The vector table entry used is always the 0x14 Hyp mode entry point, |
| * unless this is an UNDEF/SVC/HVC/abort taken from Hyp to Hyp. |
| * The offset applied to the preferred return address is always zero |
| * (see DDI0487C.a section G1.12.3). |
| * PSTATE A/I/F masks are set based only on the SCR.EA/IRQ/FIQ values. |
| */ |
| uint32_t addr, mask; |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| |
| switch (cs->exception_index) { |
| case EXCP_UDEF: |
| addr = 0x04; |
| break; |
| case EXCP_SWI: |
| addr = 0x08; |
| break; |
| case EXCP_BKPT: |
| /* Fall through to prefetch abort. */ |
| case EXCP_PREFETCH_ABORT: |
| env->cp15.ifar_s = env->exception.vaddress; |
| qemu_log_mask(CPU_LOG_INT, "...with HIFAR 0x%x\n", |
| (uint32_t)env->exception.vaddress); |
| addr = 0x0c; |
| break; |
| case EXCP_DATA_ABORT: |
| env->cp15.dfar_s = env->exception.vaddress; |
| qemu_log_mask(CPU_LOG_INT, "...with HDFAR 0x%x\n", |
| (uint32_t)env->exception.vaddress); |
| addr = 0x10; |
| break; |
| case EXCP_IRQ: |
| addr = 0x18; |
| break; |
| case EXCP_FIQ: |
| addr = 0x1c; |
| break; |
| case EXCP_HVC: |
| addr = 0x08; |
| break; |
| case EXCP_HYP_TRAP: |
| addr = 0x14; |
| break; |
| default: |
| cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); |
| } |
| |
| if (cs->exception_index != EXCP_IRQ && cs->exception_index != EXCP_FIQ) { |
| if (!arm_feature(env, ARM_FEATURE_V8)) { |
| /* |
| * QEMU syndrome values are v8-style. v7 has the IL bit |
| * UNK/SBZP for "field not valid" cases, where v8 uses RES1. |
| * If this is a v7 CPU, squash the IL bit in those cases. |
| */ |
| if (cs->exception_index == EXCP_PREFETCH_ABORT || |
| (cs->exception_index == EXCP_DATA_ABORT && |
| !(env->exception.syndrome & ARM_EL_ISV)) || |
| syn_get_ec(env->exception.syndrome) == EC_UNCATEGORIZED) { |
| env->exception.syndrome &= ~ARM_EL_IL; |
| } |
| } |
| env->cp15.esr_el[2] = env->exception.syndrome; |
| } |
| |
| if (arm_current_el(env) != 2 && addr < 0x14) { |
| addr = 0x14; |
| } |
| |
| mask = 0; |
| if (!(env->cp15.scr_el3 & SCR_EA)) { |
| mask |= CPSR_A; |
| } |
| if (!(env->cp15.scr_el3 & SCR_IRQ)) { |
| mask |= CPSR_I; |
| } |
| if (!(env->cp15.scr_el3 & SCR_FIQ)) { |
| mask |= CPSR_F; |
| } |
| |
| addr += env->cp15.hvbar; |
| |
| take_aarch32_exception(env, ARM_CPU_MODE_HYP, mask, 0, addr); |
| } |
| |
| static void arm_cpu_do_interrupt_aarch32(CPUState *cs) |
| { |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| uint32_t addr; |
| uint32_t mask; |
| int new_mode; |
| uint32_t offset; |
| uint32_t moe; |
| |
| /* If this is a debug exception we must update the DBGDSCR.MOE bits */ |
| switch (syn_get_ec(env->exception.syndrome)) { |
| case EC_BREAKPOINT: |
| case EC_BREAKPOINT_SAME_EL: |
| moe = 1; |
| break; |
| case EC_WATCHPOINT: |
| case EC_WATCHPOINT_SAME_EL: |
| moe = 10; |
| break; |
| case EC_AA32_BKPT: |
| moe = 3; |
| break; |
| case EC_VECTORCATCH: |
| moe = 5; |
| break; |
| default: |
| moe = 0; |
| break; |
| } |
| |
| if (moe) { |
| env->cp15.mdscr_el1 = deposit64(env->cp15.mdscr_el1, 2, 4, moe); |
| } |
| |
| if (env->exception.target_el == 2) { |
| arm_cpu_do_interrupt_aarch32_hyp(cs); |
| return; |
| } |
| |
| switch (cs->exception_index) { |
| case EXCP_UDEF: |
| new_mode = ARM_CPU_MODE_UND; |
| addr = 0x04; |
| mask = CPSR_I; |
| if (env->thumb) |
| offset = 2; |
| else |
| offset = 4; |
| break; |
| case EXCP_SWI: |
| new_mode = ARM_CPU_MODE_SVC; |
| addr = 0x08; |
| mask = CPSR_I; |
| /* The PC already points to the next instruction. */ |
| offset = 0; |
| break; |
| case EXCP_BKPT: |
| /* Fall through to prefetch abort. */ |
| case EXCP_PREFETCH_ABORT: |
| A32_BANKED_CURRENT_REG_SET(env, ifsr, env->exception.fsr); |
| A32_BANKED_CURRENT_REG_SET(env, ifar, env->exception.vaddress); |
| qemu_log_mask(CPU_LOG_INT, "...with IFSR 0x%x IFAR 0x%x\n", |
| env->exception.fsr, (uint32_t)env->exception.vaddress); |
| new_mode = ARM_CPU_MODE_ABT; |
| addr = 0x0c; |
| mask = CPSR_A | CPSR_I; |
| offset = 4; |
| break; |
| case EXCP_DATA_ABORT: |
| A32_BANKED_CURRENT_REG_SET(env, dfsr, env->exception.fsr); |
| A32_BANKED_CURRENT_REG_SET(env, dfar, env->exception.vaddress); |
| qemu_log_mask(CPU_LOG_INT, "...with DFSR 0x%x DFAR 0x%x\n", |
| env->exception.fsr, |
| (uint32_t)env->exception.vaddress); |
| new_mode = ARM_CPU_MODE_ABT; |
| addr = 0x10; |
| mask = CPSR_A | CPSR_I; |
| offset = 8; |
| break; |
| case EXCP_IRQ: |
| new_mode = ARM_CPU_MODE_IRQ; |
| addr = 0x18; |
| /* Disable IRQ and imprecise data aborts. */ |
| mask = CPSR_A | CPSR_I; |
| offset = 4; |
| if (env->cp15.scr_el3 & SCR_IRQ) { |
| /* IRQ routed to monitor mode */ |
| new_mode = ARM_CPU_MODE_MON; |
| mask |= CPSR_F; |
| } |
| break; |
| case EXCP_FIQ: |
| new_mode = ARM_CPU_MODE_FIQ; |
| addr = 0x1c; |
| /* Disable FIQ, IRQ and imprecise data aborts. */ |
| mask = CPSR_A | CPSR_I | CPSR_F; |
| if (env->cp15.scr_el3 & SCR_FIQ) { |
| /* FIQ routed to monitor mode */ |
| new_mode = ARM_CPU_MODE_MON; |
| } |
| offset = 4; |
| break; |
| case EXCP_VIRQ: |
| new_mode = ARM_CPU_MODE_IRQ; |
| addr = 0x18; |
| /* Disable IRQ and imprecise data aborts. */ |
| mask = CPSR_A | CPSR_I; |
| offset = 4; |
| break; |
| case EXCP_VFIQ: |
| new_mode = ARM_CPU_MODE_FIQ; |
| addr = 0x1c; |
| /* Disable FIQ, IRQ and imprecise data aborts. */ |
| mask = CPSR_A | CPSR_I | CPSR_F; |
| offset = 4; |
| break; |
| case EXCP_SMC: |
| new_mode = ARM_CPU_MODE_MON; |
| addr = 0x08; |
| mask = CPSR_A | CPSR_I | CPSR_F; |
| offset = 0; |
| break; |
| default: |
| cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); |
| return; /* Never happens. Keep compiler happy. */ |
| } |
| |
| if (new_mode == ARM_CPU_MODE_MON) { |
| addr += env->cp15.mvbar; |
| } else if (A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_V) { |
| /* High vectors. When enabled, base address cannot be remapped. */ |
| addr += 0xffff0000; |
| } else { |
| /* ARM v7 architectures provide a vector base address register to remap |
| * the interrupt vector table. |
| * This register is only followed in non-monitor mode, and is banked. |
| * Note: only bits 31:5 are valid. |
| */ |
| addr += A32_BANKED_CURRENT_REG_GET(env, vbar); |
| } |
| |
| if ((env->uncached_cpsr & CPSR_M) == ARM_CPU_MODE_MON) { |
| env->cp15.scr_el3 &= ~SCR_NS; |
| } |
| |
| take_aarch32_exception(env, new_mode, mask, offset, addr); |
| } |
| |
| static int aarch64_regnum(CPUARMState *env, int aarch32_reg) |
| { |
| /* |
| * Return the register number of the AArch64 view of the AArch32 |
| * register @aarch32_reg. The CPUARMState CPSR is assumed to still |
| * be that of the AArch32 mode the exception came from. |
| */ |
| int mode = env->uncached_cpsr & CPSR_M; |
| |
| switch (aarch32_reg) { |
| case 0 ... 7: |
| return aarch32_reg; |
| case 8 ... 12: |
| return mode == ARM_CPU_MODE_FIQ ? aarch32_reg + 16 : aarch32_reg; |
| case 13: |
| switch (mode) { |
| case ARM_CPU_MODE_USR: |
| case ARM_CPU_MODE_SYS: |
| return 13; |
| case ARM_CPU_MODE_HYP: |
| return 15; |
| case ARM_CPU_MODE_IRQ: |
| return 17; |
| case ARM_CPU_MODE_SVC: |
| return 19; |
| case ARM_CPU_MODE_ABT: |
| return 21; |
| case ARM_CPU_MODE_UND: |
| return 23; |
| case ARM_CPU_MODE_FIQ: |
| return 29; |
| default: |
| g_assert_not_reached(); |
| } |
| case 14: |
| switch (mode) { |
| case ARM_CPU_MODE_USR: |
| case ARM_CPU_MODE_SYS: |
| case ARM_CPU_MODE_HYP: |
| return 14; |
| case ARM_CPU_MODE_IRQ: |
| return 16; |
| case ARM_CPU_MODE_SVC: |
| return 18; |
| case ARM_CPU_MODE_ABT: |
| return 20; |
| case ARM_CPU_MODE_UND: |
| return 22; |
| case ARM_CPU_MODE_FIQ: |
| return 30; |
| default: |
| g_assert_not_reached(); |
| } |
| case 15: |
| return 31; |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| static uint32_t cpsr_read_for_spsr_elx(CPUARMState *env) |
| { |
| uint32_t ret = cpsr_read(env); |
| |
| /* Move DIT to the correct location for SPSR_ELx */ |
| if (ret & CPSR_DIT) { |
| ret &= ~CPSR_DIT; |
| ret |= PSTATE_DIT; |
| } |
| /* Merge PSTATE.SS into SPSR_ELx */ |
| ret |= env->pstate & PSTATE_SS; |
| |
| return ret; |
| } |
| |
| /* Handle exception entry to a target EL which is using AArch64 */ |
| static void arm_cpu_do_interrupt_aarch64(CPUState *cs) |
| { |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| unsigned int new_el = env->exception.target_el; |
| target_ulong addr = env->cp15.vbar_el[new_el]; |
| unsigned int new_mode = aarch64_pstate_mode(new_el, true); |
| unsigned int old_mode; |
| unsigned int cur_el = arm_current_el(env); |
| int rt; |
| |
| /* |
| * Note that new_el can never be 0. If cur_el is 0, then |
| * el0_a64 is is_a64(), else el0_a64 is ignored. |
| */ |
| aarch64_sve_change_el(env, cur_el, new_el, is_a64(env)); |
| |
| if (cur_el < new_el) { |
| /* Entry vector offset depends on whether the implemented EL |
| * immediately lower than the target level is using AArch32 or AArch64 |
| */ |
| bool is_aa64; |
| uint64_t hcr; |
| |
| switch (new_el) { |
| case 3: |
| is_aa64 = (env->cp15.scr_el3 & SCR_RW) != 0; |
| break; |
| case 2: |
| hcr = arm_hcr_el2_eff(env); |
| if ((hcr & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) { |
| is_aa64 = (hcr & HCR_RW) != 0; |
| break; |
| } |
| /* fall through */ |
| case 1: |
| is_aa64 = is_a64(env); |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| |
| if (is_aa64) { |
| addr += 0x400; |
| } else { |
| addr += 0x600; |
| } |
| } else if (pstate_read(env) & PSTATE_SP) { |
| addr += 0x200; |
| } |
| |
| switch (cs->exception_index) { |
| case EXCP_PREFETCH_ABORT: |
| case EXCP_DATA_ABORT: |
| env->cp15.far_el[new_el] = env->exception.vaddress; |
| qemu_log_mask(CPU_LOG_INT, "...with FAR 0x%" PRIx64 "\n", |
| env->cp15.far_el[new_el]); |
| /* fall through */ |
| case EXCP_BKPT: |
| case EXCP_UDEF: |
| case EXCP_SWI: |
| case EXCP_HVC: |
| case EXCP_HYP_TRAP: |
| case EXCP_SMC: |
| switch (syn_get_ec(env->exception.syndrome)) { |
| case EC_ADVSIMDFPACCESSTRAP: |
| /* |
| * QEMU internal FP/SIMD syndromes from AArch32 include the |
| * TA and coproc fields which are only exposed if the exception |
| * is taken to AArch32 Hyp mode. Mask them out to get a valid |
| * AArch64 format syndrome. |
| */ |
| env->exception.syndrome &= ~MAKE_64BIT_MASK(0, 20); |
| break; |
| case EC_CP14RTTRAP: |
| case EC_CP15RTTRAP: |
| case EC_CP14DTTRAP: |
| /* |
| * For a trap on AArch32 MRC/MCR/LDC/STC the Rt field is currently |
| * the raw register field from the insn; when taking this to |
| * AArch64 we must convert it to the AArch64 view of the register |
| * number. Notice that we read a 4-bit AArch32 register number and |
| * write back a 5-bit AArch64 one. |
| */ |
| rt = extract32(env->exception.syndrome, 5, 4); |
| rt = aarch64_regnum(env, rt); |
| env->exception.syndrome = deposit32(env->exception.syndrome, |
| 5, 5, rt); |
| break; |
| case EC_CP15RRTTRAP: |
| case EC_CP14RRTTRAP: |
| /* Similarly for MRRC/MCRR traps for Rt and Rt2 fields */ |
| rt = extract32(env->exception.syndrome, 5, 4); |
| rt = aarch64_regnum(env, rt); |
| env->exception.syndrome = deposit32(env->exception.syndrome, |
| 5, 5, rt); |
| rt = extract32(env->exception.syndrome, 10, 4); |
| rt = aarch64_regnum(env, rt); |
| env->exception.syndrome = deposit32(env->exception.syndrome, |
| 10, 5, rt); |
| break; |
| } |
| env->cp15.esr_el[new_el] = env->exception.syndrome; |
| break; |
| case EXCP_IRQ: |
| case EXCP_VIRQ: |
| addr += 0x80; |
| break; |
| case EXCP_FIQ: |
| case EXCP_VFIQ: |
| addr += 0x100; |
| break; |
| default: |
| cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index); |
| } |
| |
| if (is_a64(env)) { |
| old_mode = pstate_read(env); |
| aarch64_save_sp(env, arm_current_el(env)); |
| env->elr_el[new_el] = env->pc; |
| } else { |
| old_mode = cpsr_read_for_spsr_elx(env); |
| env->elr_el[new_el] = env->regs[15]; |
| |
| aarch64_sync_32_to_64(env); |
| |
| env->condexec_bits = 0; |
| } |
| env->banked_spsr[aarch64_banked_spsr_index(new_el)] = old_mode; |
| |
| qemu_log_mask(CPU_LOG_INT, "...with ELR 0x%" PRIx64 "\n", |
| env->elr_el[new_el]); |
| |
| if (cpu_isar_feature(aa64_pan, cpu)) { |
| /* The value of PSTATE.PAN is normally preserved, except when ... */ |
| new_mode |= old_mode & PSTATE_PAN; |
| switch (new_el) { |
| case 2: |
| /* ... the target is EL2 with HCR_EL2.{E2H,TGE} == '11' ... */ |
| if ((arm_hcr_el2_eff(env) & (HCR_E2H | HCR_TGE)) |
| != (HCR_E2H | HCR_TGE)) { |
| break; |
| } |
| /* fall through */ |
| case 1: |
| /* ... the target is EL1 ... */ |
| /* ... and SCTLR_ELx.SPAN == 0, then set to 1. */ |
| if ((env->cp15.sctlr_el[new_el] & SCTLR_SPAN) == 0) { |
| new_mode |= PSTATE_PAN; |
| } |
| break; |
| } |
| } |
| if (cpu_isar_feature(aa64_mte, cpu)) { |
| new_mode |= PSTATE_TCO; |
| } |
| |
| if (cpu_isar_feature(aa64_ssbs, cpu)) { |
| if (env->cp15.sctlr_el[new_el] & SCTLR_DSSBS_64) { |
| new_mode |= PSTATE_SSBS; |
| } else { |
| new_mode &= ~PSTATE_SSBS; |
| } |
| } |
| |
| pstate_write(env, PSTATE_DAIF | new_mode); |
| env->aarch64 = 1; |
| aarch64_restore_sp(env, new_el); |
| helper_rebuild_hflags_a64(env, new_el); |
| |
| env->pc = addr; |
| |
| qemu_log_mask(CPU_LOG_INT, "...to EL%d PC 0x%" PRIx64 " PSTATE 0x%x\n", |
| new_el, env->pc, pstate_read(env)); |
| } |
| |
| /* |
| * Do semihosting call and set the appropriate return value. All the |
| * permission and validity checks have been done at translate time. |
| * |
| * We only see semihosting exceptions in TCG only as they are not |
| * trapped to the hypervisor in KVM. |
| */ |
| #ifdef CONFIG_TCG |
| static void handle_semihosting(CPUState *cs) |
| { |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| |
| if (is_a64(env)) { |
| qemu_log_mask(CPU_LOG_INT, |
| "...handling as semihosting call 0x%" PRIx64 "\n", |
| env->xregs[0]); |
| env->xregs[0] = do_common_semihosting(cs); |
| env->pc += 4; |
| } else { |
| qemu_log_mask(CPU_LOG_INT, |
| "...handling as semihosting call 0x%x\n", |
| env->regs[0]); |
| env->regs[0] = do_common_semihosting(cs); |
| env->regs[15] += env->thumb ? 2 : 4; |
| } |
| } |
| #endif |
| |
| /* Handle a CPU exception for A and R profile CPUs. |
| * Do any appropriate logging, handle PSCI calls, and then hand off |
| * to the AArch64-entry or AArch32-entry function depending on the |
| * target exception level's register width. |
| * |
| * Note: this is used for both TCG (as the do_interrupt tcg op), |
| * and KVM to re-inject guest debug exceptions, and to |
| * inject a Synchronous-External-Abort. |
| */ |
| void arm_cpu_do_interrupt(CPUState *cs) |
| { |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| unsigned int new_el = env->exception.target_el; |
| |
| assert(!arm_feature(env, ARM_FEATURE_M)); |
| |
| arm_log_exception(cs); |
| qemu_log_mask(CPU_LOG_INT, "...from EL%d to EL%d\n", arm_current_el(env), |
| new_el); |
| if (qemu_loglevel_mask(CPU_LOG_INT) |
| && !excp_is_internal(cs->exception_index)) { |
| qemu_log_mask(CPU_LOG_INT, "...with ESR 0x%x/0x%" PRIx32 "\n", |
| syn_get_ec(env->exception.syndrome), |
| env->exception.syndrome); |
| } |
| |
| if (arm_is_psci_call(cpu, cs->exception_index)) { |
| arm_handle_psci_call(cpu); |
| qemu_log_mask(CPU_LOG_INT, "...handled as PSCI call\n"); |
| return; |
| } |
| |
| /* |
| * Semihosting semantics depend on the register width of the code |
| * that caused the exception, not the target exception level, so |
| * must be handled here. |
| */ |
| #ifdef CONFIG_TCG |
| if (cs->exception_index == EXCP_SEMIHOST) { |
| handle_semihosting(cs); |
| return; |
| } |
| #endif |
| |
| /* Hooks may change global state so BQL should be held, also the |
| * BQL needs to be held for any modification of |
| * cs->interrupt_request. |
| */ |
| g_assert(qemu_mutex_iothread_locked()); |
| |
| arm_call_pre_el_change_hook(cpu); |
| |
| assert(!excp_is_internal(cs->exception_index)); |
| if (arm_el_is_aa64(env, new_el)) { |
| arm_cpu_do_interrupt_aarch64(cs); |
| } else { |
| arm_cpu_do_interrupt_aarch32(cs); |
| } |
| |
| arm_call_el_change_hook(cpu); |
| |
| if (!kvm_enabled()) { |
| cs->interrupt_request |= CPU_INTERRUPT_EXITTB; |
| } |
| } |
| #endif /* !CONFIG_USER_ONLY */ |
| |
| uint64_t arm_sctlr(CPUARMState *env, int el) |
| { |
| /* Only EL0 needs to be adjusted for EL1&0 or EL2&0. */ |
| if (el == 0) { |
| ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, 0); |
| el = (mmu_idx == ARMMMUIdx_E20_0 || mmu_idx == ARMMMUIdx_SE20_0) |
| ? 2 : 1; |
| } |
| return env->cp15.sctlr_el[el]; |
| } |
| |
| /* Return the SCTLR value which controls this address translation regime */ |
| static inline uint64_t regime_sctlr(CPUARMState *env, ARMMMUIdx mmu_idx) |
| { |
| return env->cp15.sctlr_el[regime_el(env, mmu_idx)]; |
| } |
| |
| #ifndef CONFIG_USER_ONLY |
| |
| /* Return true if the specified stage of address translation is disabled */ |
| static inline bool regime_translation_disabled(CPUARMState *env, |
| ARMMMUIdx mmu_idx) |
| { |
| uint64_t hcr_el2; |
| |
| if (arm_feature(env, ARM_FEATURE_M)) { |
| switch (env->v7m.mpu_ctrl[regime_is_secure(env, mmu_idx)] & |
| (R_V7M_MPU_CTRL_ENABLE_MASK | R_V7M_MPU_CTRL_HFNMIENA_MASK)) { |
| case R_V7M_MPU_CTRL_ENABLE_MASK: |
| /* Enabled, but not for HardFault and NMI */ |
| return mmu_idx & ARM_MMU_IDX_M_NEGPRI; |
| case R_V7M_MPU_CTRL_ENABLE_MASK | R_V7M_MPU_CTRL_HFNMIENA_MASK: |
| /* Enabled for all cases */ |
| return false; |
| case 0: |
| default: |
| /* HFNMIENA set and ENABLE clear is UNPREDICTABLE, but |
| * we warned about that in armv7m_nvic.c when the guest set it. |
| */ |
| return true; |
| } |
| } |
| |
| hcr_el2 = arm_hcr_el2_eff(env); |
| |
| if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) { |
| /* HCR.DC means HCR.VM behaves as 1 */ |
| return (hcr_el2 & (HCR_DC | HCR_VM)) == 0; |
| } |
| |
| if (hcr_el2 & HCR_TGE) { |
| /* TGE means that NS EL0/1 act as if SCTLR_EL1.M is zero */ |
| if (!regime_is_secure(env, mmu_idx) && regime_el(env, mmu_idx) == 1) { |
| return true; |
| } |
| } |
| |
| if ((hcr_el2 & HCR_DC) && arm_mmu_idx_is_stage1_of_2(mmu_idx)) { |
| /* HCR.DC means SCTLR_EL1.M behaves as 0 */ |
| return true; |
| } |
| |
| return (regime_sctlr(env, mmu_idx) & SCTLR_M) == 0; |
| } |
| |
| static inline bool regime_translation_big_endian(CPUARMState *env, |
| ARMMMUIdx mmu_idx) |
| { |
| return (regime_sctlr(env, mmu_idx) & SCTLR_EE) != 0; |
| } |
| |
| /* Return the TTBR associated with this translation regime */ |
| static inline uint64_t regime_ttbr(CPUARMState *env, ARMMMUIdx mmu_idx, |
| int ttbrn) |
| { |
| if (mmu_idx == ARMMMUIdx_Stage2) { |
| return env->cp15.vttbr_el2; |
| } |
| if (mmu_idx == ARMMMUIdx_Stage2_S) { |
| return env->cp15.vsttbr_el2; |
| } |
| if (ttbrn == 0) { |
| return env->cp15.ttbr0_el[regime_el(env, mmu_idx)]; |
| } else { |
| return env->cp15.ttbr1_el[regime_el(env, mmu_idx)]; |
| } |
| } |
| |
| #endif /* !CONFIG_USER_ONLY */ |
| |
| /* Convert a possible stage1+2 MMU index into the appropriate |
| * stage 1 MMU index |
| */ |
| static inline ARMMMUIdx stage_1_mmu_idx(ARMMMUIdx mmu_idx) |
| { |
| switch (mmu_idx) { |
| case ARMMMUIdx_SE10_0: |
| return ARMMMUIdx_Stage1_SE0; |
| case ARMMMUIdx_SE10_1: |
| return ARMMMUIdx_Stage1_SE1; |
| case ARMMMUIdx_SE10_1_PAN: |
| return ARMMMUIdx_Stage1_SE1_PAN; |
| case ARMMMUIdx_E10_0: |
| return ARMMMUIdx_Stage1_E0; |
| case ARMMMUIdx_E10_1: |
| return ARMMMUIdx_Stage1_E1; |
| case ARMMMUIdx_E10_1_PAN: |
| return ARMMMUIdx_Stage1_E1_PAN; |
| default: |
| return mmu_idx; |
| } |
| } |
| |
| /* Return true if the translation regime is using LPAE format page tables */ |
| static inline bool regime_using_lpae_format(CPUARMState *env, |
| ARMMMUIdx mmu_idx) |
| { |
| int el = regime_el(env, mmu_idx); |
| if (el == 2 || arm_el_is_aa64(env, el)) { |
| return true; |
| } |
| if (arm_feature(env, ARM_FEATURE_LPAE) |
| && (regime_tcr(env, mmu_idx)->raw_tcr & TTBCR_EAE)) { |
| return true; |
| } |
| return false; |
| } |
| |
| /* Returns true if the stage 1 translation regime is using LPAE format page |
| * tables. Used when raising alignment exceptions, whose FSR changes depending |
| * on whether the long or short descriptor format is in use. */ |
| bool arm_s1_regime_using_lpae_format(CPUARMState *env, ARMMMUIdx mmu_idx) |
| { |
| mmu_idx = stage_1_mmu_idx(mmu_idx); |
| |
| return regime_using_lpae_format(env, mmu_idx); |
| } |
| |
| #ifndef CONFIG_USER_ONLY |
| static inline bool regime_is_user(CPUARMState *env, ARMMMUIdx mmu_idx) |
| { |
| switch (mmu_idx) { |
| case ARMMMUIdx_SE10_0: |
| case ARMMMUIdx_E20_0: |
| case ARMMMUIdx_SE20_0: |
| case ARMMMUIdx_Stage1_E0: |
| case ARMMMUIdx_Stage1_SE0: |
| case ARMMMUIdx_MUser: |
| case ARMMMUIdx_MSUser: |
| case ARMMMUIdx_MUserNegPri: |
| case ARMMMUIdx_MSUserNegPri: |
| return true; |
| default: |
| return false; |
| case ARMMMUIdx_E10_0: |
| case ARMMMUIdx_E10_1: |
| case ARMMMUIdx_E10_1_PAN: |
| g_assert_not_reached(); |
| } |
| } |
| |
| /* Translate section/page access permissions to page |
| * R/W protection flags |
| * |
| * @env: CPUARMState |
| * @mmu_idx: MMU index indicating required translation regime |
| * @ap: The 3-bit access permissions (AP[2:0]) |
| * @domain_prot: The 2-bit domain access permissions |
| */ |
| static inline int ap_to_rw_prot(CPUARMState *env, ARMMMUIdx mmu_idx, |
| int ap, int domain_prot) |
| { |
| bool is_user = regime_is_user(env, mmu_idx); |
| |
| if (domain_prot == 3) { |
| return PAGE_READ | PAGE_WRITE; |
| } |
| |
| switch (ap) { |
| case 0: |
| if (arm_feature(env, ARM_FEATURE_V7)) { |
| return 0; |
| } |
| switch (regime_sctlr(env, mmu_idx) & (SCTLR_S | SCTLR_R)) { |
| case SCTLR_S: |
| return is_user ? 0 : PAGE_READ; |
| case SCTLR_R: |
| return PAGE_READ; |
| default: |
| return 0; |
| } |
| case 1: |
| return is_user ? 0 : PAGE_READ | PAGE_WRITE; |
| case 2: |
| if (is_user) { |
| return PAGE_READ; |
| } else { |
| return PAGE_READ | PAGE_WRITE; |
| } |
| case 3: |
| return PAGE_READ | PAGE_WRITE; |
| case 4: /* Reserved. */ |
| return 0; |
| case 5: |
| return is_user ? 0 : PAGE_READ; |
| case 6: |
| return PAGE_READ; |
| case 7: |
| if (!arm_feature(env, ARM_FEATURE_V6K)) { |
| return 0; |
| } |
| return PAGE_READ; |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| /* Translate section/page access permissions to page |
| * R/W protection flags. |
| * |
| * @ap: The 2-bit simple AP (AP[2:1]) |
| * @is_user: TRUE if accessing from PL0 |
| */ |
| static inline int simple_ap_to_rw_prot_is_user(int ap, bool is_user) |
| { |
| switch (ap) { |
| case 0: |
| return is_user ? 0 : PAGE_READ | PAGE_WRITE; |
| case 1: |
| return PAGE_READ | PAGE_WRITE; |
| case 2: |
| return is_user ? 0 : PAGE_READ; |
| case 3: |
| return PAGE_READ; |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| static inline int |
| simple_ap_to_rw_prot(CPUARMState *env, ARMMMUIdx mmu_idx, int ap) |
| { |
| return simple_ap_to_rw_prot_is_user(ap, regime_is_user(env, mmu_idx)); |
| } |
| |
| /* Translate S2 section/page access permissions to protection flags |
| * |
| * @env: CPUARMState |
| * @s2ap: The 2-bit stage2 access permissions (S2AP) |
| * @xn: XN (execute-never) bits |
| * @s1_is_el0: true if this is S2 of an S1+2 walk for EL0 |
| */ |
| static int get_S2prot(CPUARMState *env, int s2ap, int xn, bool s1_is_el0) |
| { |
| int prot = 0; |
| |
| if (s2ap & 1) { |
| prot |= PAGE_READ; |
| } |
| if (s2ap & 2) { |
| prot |= PAGE_WRITE; |
| } |
| |
| if (cpu_isar_feature(any_tts2uxn, env_archcpu(env))) { |
| switch (xn) { |
| case 0: |
| prot |= PAGE_EXEC; |
| break; |
| case 1: |
| if (s1_is_el0) { |
| prot |= PAGE_EXEC; |
| } |
| break; |
| case 2: |
| break; |
| case 3: |
| if (!s1_is_el0) { |
| prot |= PAGE_EXEC; |
| } |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| } else { |
| if (!extract32(xn, 1, 1)) { |
| if (arm_el_is_aa64(env, 2) || prot & PAGE_READ) { |
| prot |= PAGE_EXEC; |
| } |
| } |
| } |
| return prot; |
| } |
| |
| /* Translate section/page access permissions to protection flags |
| * |
| * @env: CPUARMState |
| * @mmu_idx: MMU index indicating required translation regime |
| * @is_aa64: TRUE if AArch64 |
| * @ap: The 2-bit simple AP (AP[2:1]) |
| * @ns: NS (non-secure) bit |
| * @xn: XN (execute-never) bit |
| * @pxn: PXN (privileged execute-never) bit |
| */ |
| static int get_S1prot(CPUARMState *env, ARMMMUIdx mmu_idx, bool is_aa64, |
| int ap, int ns, int xn, int pxn) |
| { |
| bool is_user = regime_is_user(env, mmu_idx); |
| int prot_rw, user_rw; |
| bool have_wxn; |
| int wxn = 0; |
| |
| assert(mmu_idx != ARMMMUIdx_Stage2); |
| assert(mmu_idx != ARMMMUIdx_Stage2_S); |
| |
| user_rw = simple_ap_to_rw_prot_is_user(ap, true); |
| if (is_user) { |
| prot_rw = user_rw; |
| } else { |
| if (user_rw && regime_is_pan(env, mmu_idx)) { |
| /* PAN forbids data accesses but doesn't affect insn fetch */ |
| prot_rw = 0; |
| } else { |
| prot_rw = simple_ap_to_rw_prot_is_user(ap, false); |
| } |
| } |
| |
| if (ns && arm_is_secure(env) && (env->cp15.scr_el3 & SCR_SIF)) { |
| return prot_rw; |
| } |
| |
| /* TODO have_wxn should be replaced with |
| * ARM_FEATURE_V8 || (ARM_FEATURE_V7 && ARM_FEATURE_EL2) |
| * when ARM_FEATURE_EL2 starts getting set. For now we assume all LPAE |
| * compatible processors have EL2, which is required for [U]WXN. |
| */ |
| have_wxn = arm_feature(env, ARM_FEATURE_LPAE); |
| |
| if (have_wxn) { |
| wxn = regime_sctlr(env, mmu_idx) & SCTLR_WXN; |
| } |
| |
| if (is_aa64) { |
| if (regime_has_2_ranges(mmu_idx) && !is_user) { |
| xn = pxn || (user_rw & PAGE_WRITE); |
| } |
| } else if (arm_feature(env, ARM_FEATURE_V7)) { |
| switch (regime_el(env, mmu_idx)) { |
| case 1: |
| case 3: |
| if (is_user) { |
| xn = xn || !(user_rw & PAGE_READ); |
| } else { |
| int uwxn = 0; |
| if (have_wxn) { |
| uwxn = regime_sctlr(env, mmu_idx) & SCTLR_UWXN; |
| } |
| xn = xn || !(prot_rw & PAGE_READ) || pxn || |
| (uwxn && (user_rw & PAGE_WRITE)); |
| } |
| break; |
| case 2: |
| break; |
| } |
| } else { |
| xn = wxn = 0; |
| } |
| |
| if (xn || (wxn && (prot_rw & PAGE_WRITE))) { |
| return prot_rw; |
| } |
| return prot_rw | PAGE_EXEC; |
| } |
| |
| static bool get_level1_table_address(CPUARMState *env, ARMMMUIdx mmu_idx, |
| uint32_t *table, uint32_t address) |
| { |
| /* Note that we can only get here for an AArch32 PL0/PL1 lookup */ |
| TCR *tcr = regime_tcr(env, mmu_idx); |
| |
| if (address & tcr->mask) { |
| if (tcr->raw_tcr & TTBCR_PD1) { |
| /* Translation table walk disabled for TTBR1 */ |
| return false; |
| } |
| *table = regime_ttbr(env, mmu_idx, 1) & 0xffffc000; |
| } else { |
| if (tcr->raw_tcr & TTBCR_PD0) { |
| /* Translation table walk disabled for TTBR0 */ |
| return false; |
| } |
| *table = regime_ttbr(env, mmu_idx, 0) & tcr->base_mask; |
| } |
| *table |= (address >> 18) & 0x3ffc; |
| return true; |
| } |
| |
| /* Translate a S1 pagetable walk through S2 if needed. */ |
| static hwaddr S1_ptw_translate(CPUARMState *env, ARMMMUIdx mmu_idx, |
| hwaddr addr, bool *is_secure, |
| ARMMMUFaultInfo *fi) |
| { |
| if (arm_mmu_idx_is_stage1_of_2(mmu_idx) && |
| !regime_translation_disabled(env, ARMMMUIdx_Stage2)) { |
| target_ulong s2size; |
| hwaddr s2pa; |
| int s2prot; |
| int ret; |
| ARMMMUIdx s2_mmu_idx = *is_secure ? ARMMMUIdx_Stage2_S |
| : ARMMMUIdx_Stage2; |
| ARMCacheAttrs cacheattrs = {}; |
| MemTxAttrs txattrs = {}; |
| |
| ret = get_phys_addr_lpae(env, addr, MMU_DATA_LOAD, s2_mmu_idx, false, |
| &s2pa, &txattrs, &s2prot, &s2size, fi, |
| &cacheattrs); |
| if (ret) { |
| assert(fi->type != ARMFault_None); |
| fi->s2addr = addr; |
| fi->stage2 = true; |
| fi->s1ptw = true; |
| fi->s1ns = !*is_secure; |
| return ~0; |
| } |
| if ((arm_hcr_el2_eff(env) & HCR_PTW) && |
| (cacheattrs.attrs & 0xf0) == 0) { |
| /* |
| * PTW set and S1 walk touched S2 Device memory: |
| * generate Permission fault. |
| */ |
| fi->type = ARMFault_Permission; |
| fi->s2addr = addr; |
| fi->stage2 = true; |
| fi->s1ptw = true; |
| fi->s1ns = !*is_secure; |
| return ~0; |
| } |
| |
| if (arm_is_secure_below_el3(env)) { |
| /* Check if page table walk is to secure or non-secure PA space. */ |
| if (*is_secure) { |
| *is_secure = !(env->cp15.vstcr_el2.raw_tcr & VSTCR_SW); |
| } else { |
| *is_secure = !(env->cp15.vtcr_el2.raw_tcr & VTCR_NSW); |
| } |
| } else { |
| assert(!*is_secure); |
| } |
| |
| addr = s2pa; |
| } |
| return addr; |
| } |
| |
| /* All loads done in the course of a page table walk go through here. */ |
| static uint32_t arm_ldl_ptw(CPUState *cs, hwaddr addr, bool is_secure, |
| ARMMMUIdx mmu_idx, ARMMMUFaultInfo *fi) |
| { |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| MemTxAttrs attrs = {}; |
| MemTxResult result = MEMTX_OK; |
| AddressSpace *as; |
| uint32_t data; |
| |
| addr = S1_ptw_translate(env, mmu_idx, addr, &is_secure, fi); |
| attrs.secure = is_secure; |
| as = arm_addressspace(cs, attrs); |
| if (fi->s1ptw) { |
| return 0; |
| } |
| if (regime_translation_big_endian(env, mmu_idx)) { |
| data = address_space_ldl_be(as, addr, attrs, &result); |
| } else { |
| data = address_space_ldl_le(as, addr, attrs, &result); |
| } |
| if (result == MEMTX_OK) { |
| return data; |
| } |
| fi->type = ARMFault_SyncExternalOnWalk; |
| fi->ea = arm_extabort_type(result); |
| return 0; |
| } |
| |
| static uint64_t arm_ldq_ptw(CPUState *cs, hwaddr addr, bool is_secure, |
| ARMMMUIdx mmu_idx, ARMMMUFaultInfo *fi) |
| { |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| MemTxAttrs attrs = {}; |
| MemTxResult result = MEMTX_OK; |
| AddressSpace *as; |
| uint64_t data; |
| |
| addr = S1_ptw_translate(env, mmu_idx, addr, &is_secure, fi); |
| attrs.secure = is_secure; |
| as = arm_addressspace(cs, attrs); |
| if (fi->s1ptw) { |
| return 0; |
| } |
| if (regime_translation_big_endian(env, mmu_idx)) { |
| data = address_space_ldq_be(as, addr, attrs, &result); |
| } else { |
| data = address_space_ldq_le(as, addr, attrs, &result); |
| } |
| if (result == MEMTX_OK) { |
| return data; |
| } |
| fi->type = ARMFault_SyncExternalOnWalk; |
| fi->ea = arm_extabort_type(result); |
| return 0; |
| } |
| |
| static bool get_phys_addr_v5(CPUARMState *env, uint32_t address, |
| MMUAccessType access_type, ARMMMUIdx mmu_idx, |
| hwaddr *phys_ptr, int *prot, |
| target_ulong *page_size, |
| ARMMMUFaultInfo *fi) |
| { |
| CPUState *cs = env_cpu(env); |
| int level = 1; |
| uint32_t table; |
| uint32_t desc; |
| int type; |
| int ap; |
| int domain = 0; |
| int domain_prot; |
| hwaddr phys_addr; |
| uint32_t dacr; |
| |
| /* Pagetable walk. */ |
| /* Lookup l1 descriptor. */ |
| if (!get_level1_table_address(env, mmu_idx, &table, address)) { |
| /* Section translation fault if page walk is disabled by PD0 or PD1 */ |
| fi->type = ARMFault_Translation; |
| goto do_fault; |
| } |
| desc = arm_ldl_ptw(cs, table, regime_is_secure(env, mmu_idx), |
| mmu_idx, fi); |
| if (fi->type != ARMFault_None) { |
| goto do_fault; |
| } |
| type = (desc & 3); |
| domain = (desc >> 5) & 0x0f; |
| if (regime_el(env, mmu_idx) == 1) { |
| dacr = env->cp15.dacr_ns; |
| } else { |
| dacr = env->cp15.dacr_s; |
| } |
| domain_prot = (dacr >> (domain * 2)) & 3; |
| if (type == 0) { |
| /* Section translation fault. */ |
| fi->type = ARMFault_Translation; |
| goto do_fault; |
| } |
| if (type != 2) { |
| level = 2; |
| } |
| if (domain_prot == 0 || domain_prot == 2) { |
| fi->type = ARMFault_Domain; |
| goto do_fault; |
| } |
| if (type == 2) { |
| /* 1Mb section. */ |
| phys_addr = (desc & 0xfff00000) | (address & 0x000fffff); |
| ap = (desc >> 10) & 3; |
| *page_size = 1024 * 1024; |
| } else { |
| /* Lookup l2 entry. */ |
| if (type == 1) { |
| /* Coarse pagetable. */ |
| table = (desc & 0xfffffc00) | ((address >> 10) & 0x3fc); |
| } else { |
| /* Fine pagetable. */ |
| table = (desc & 0xfffff000) | ((address >> 8) & 0xffc); |
| } |
| desc = arm_ldl_ptw(cs, table, regime_is_secure(env, mmu_idx), |
| mmu_idx, fi); |
| if (fi->type != ARMFault_None) { |
| goto do_fault; |
| } |
| switch (desc & 3) { |
| case 0: /* Page translation fault. */ |
| fi->type = ARMFault_Translation; |
| goto do_fault; |
| case 1: /* 64k page. */ |
| phys_addr = (desc & 0xffff0000) | (address & 0xffff); |
| ap = (desc >> (4 + ((address >> 13) & 6))) & 3; |
| *page_size = 0x10000; |
| break; |
| case 2: /* 4k page. */ |
| phys_addr = (desc & 0xfffff000) | (address & 0xfff); |
| ap = (desc >> (4 + ((address >> 9) & 6))) & 3; |
| *page_size = 0x1000; |
| break; |
| case 3: /* 1k page, or ARMv6/XScale "extended small (4k) page" */ |
| if (type == 1) { |
| /* ARMv6/XScale extended small page format */ |
| if (arm_feature(env, ARM_FEATURE_XSCALE) |
| || arm_feature(env, ARM_FEATURE_V6)) { |
| phys_addr = (desc & 0xfffff000) | (address & 0xfff); |
| *page_size = 0x1000; |
| } else { |
| /* UNPREDICTABLE in ARMv5; we choose to take a |
| * page translation fault. |
| */ |
| fi->type = ARMFault_Translation; |
| goto do_fault; |
| } |
| } else { |
| phys_addr = (desc & 0xfffffc00) | (address & 0x3ff); |
| *page_size = 0x400; |
| } |
| ap = (desc >> 4) & 3; |
| break; |
| default: |
| /* Never happens, but compiler isn't smart enough to tell. */ |
| abort(); |
| } |
| } |
| *prot = ap_to_rw_prot(env, mmu_idx, ap, domain_prot); |
| *prot |= *prot ? PAGE_EXEC : 0; |
| if (!(*prot & (1 << access_type))) { |
| /* Access permission fault. */ |
| fi->type = ARMFault_Permission; |
| goto do_fault; |
| } |
| *phys_ptr = phys_addr; |
| return false; |
| do_fault: |
| fi->domain = domain; |
| fi->level = level; |
| return true; |
| } |
| |
| static bool get_phys_addr_v6(CPUARMState *env, uint32_t address, |
| MMUAccessType access_type, ARMMMUIdx mmu_idx, |
| hwaddr *phys_ptr, MemTxAttrs *attrs, int *prot, |
| target_ulong *page_size, ARMMMUFaultInfo *fi) |
| { |
| CPUState *cs = env_cpu(env); |
| ARMCPU *cpu = env_archcpu(env); |
| int level = 1; |
| uint32_t table; |
| uint32_t desc; |
| uint32_t xn; |
| uint32_t pxn = 0; |
| int type; |
| int ap; |
| int domain = 0; |
| int domain_prot; |
| hwaddr phys_addr; |
| uint32_t dacr; |
| bool ns; |
| |
| /* Pagetable walk. */ |
| /* Lookup l1 descriptor. */ |
| if (!get_level1_table_address(env, mmu_idx, &table, address)) { |
| /* Section translation fault if page walk is disabled by PD0 or PD1 */ |
| fi->type = ARMFault_Translation; |
| goto do_fault; |
| } |
| desc = arm_ldl_ptw(cs, table, regime_is_secure(env, mmu_idx), |
| mmu_idx, fi); |
| if (fi->type != ARMFault_None) { |
| goto do_fault; |
| } |
| type = (desc & 3); |
| if (type == 0 || (type == 3 && !cpu_isar_feature(aa32_pxn, cpu))) { |
| /* Section translation fault, or attempt to use the encoding |
| * which is Reserved on implementations without PXN. |
| */ |
| fi->type = ARMFault_Translation; |
| goto do_fault; |
| } |
| if ((type == 1) || !(desc & (1 << 18))) { |
| /* Page or Section. */ |
| domain = (desc >> 5) & 0x0f; |
| } |
| if (regime_el(env, mmu_idx) == 1) { |
| dacr = env->cp15.dacr_ns; |
| } else { |
| dacr = env->cp15.dacr_s; |
| } |
| if (type == 1) { |
| level = 2; |
| } |
| domain_prot = (dacr >> (domain * 2)) & 3; |
| if (domain_prot == 0 || domain_prot == 2) { |
| /* Section or Page domain fault */ |
| fi->type = ARMFault_Domain; |
| goto do_fault; |
| } |
| if (type != 1) { |
| if (desc & (1 << 18)) { |
| /* Supersection. */ |
| phys_addr = (desc & 0xff000000) | (address & 0x00ffffff); |
| phys_addr |= (uint64_t)extract32(desc, 20, 4) << 32; |
| phys_addr |= (uint64_t)extract32(desc, 5, 4) << 36; |
| *page_size = 0x1000000; |
| } else { |
| /* Section. */ |
| phys_addr = (desc & 0xfff00000) | (address & 0x000fffff); |
| *page_size = 0x100000; |
| } |
| ap = ((desc >> 10) & 3) | ((desc >> 13) & 4); |
| xn = desc & (1 << 4); |
| pxn = desc & 1; |
| ns = extract32(desc, 19, 1); |
| } else { |
| if (cpu_isar_feature(aa32_pxn, cpu)) { |
| pxn = (desc >> 2) & 1; |
| } |
| ns = extract32(desc, 3, 1); |
| /* Lookup l2 entry. */ |
| table = (desc & 0xfffffc00) | ((address >> 10) & 0x3fc); |
| desc = arm_ldl_ptw(cs, table, regime_is_secure(env, mmu_idx), |
| mmu_idx, fi); |
| if (fi->type != ARMFault_None) { |
| goto do_fault; |
| } |
| ap = ((desc >> 4) & 3) | ((desc >> 7) & 4); |
| switch (desc & 3) { |
| case 0: /* Page translation fault. */ |
| fi->type = ARMFault_Translation; |
| goto do_fault; |
| case 1: /* 64k page. */ |
| phys_addr = (desc & 0xffff0000) | (address & 0xffff); |
| xn = desc & (1 << 15); |
| *page_size = 0x10000; |
| break; |
| case 2: case 3: /* 4k page. */ |
| phys_addr = (desc & 0xfffff000) | (address & 0xfff); |
| xn = desc & 1; |
| *page_size = 0x1000; |
| break; |
| default: |
| /* Never happens, but compiler isn't smart enough to tell. */ |
| abort(); |
| } |
| } |
| if (domain_prot == 3) { |
| *prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC; |
| } else { |
| if (pxn && !regime_is_user(env, mmu_idx)) { |
| xn = 1; |
| } |
| if (xn && access_type == MMU_INST_FETCH) { |
| fi->type = ARMFault_Permission; |
| goto do_fault; |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_V6K) && |
| (regime_sctlr(env, mmu_idx) & SCTLR_AFE)) { |
| /* The simplified model uses AP[0] as an access control bit. */ |
| if ((ap & 1) == 0) { |
| /* Access flag fault. */ |
| fi->type = ARMFault_AccessFlag; |
| goto do_fault; |
| } |
| *prot = simple_ap_to_rw_prot(env, mmu_idx, ap >> 1); |
| } else { |
| *prot = ap_to_rw_prot(env, mmu_idx, ap, domain_prot); |
| } |
| if (*prot && !xn) { |
| *prot |= PAGE_EXEC; |
| } |
| if (!(*prot & (1 << access_type))) { |
| /* Access permission fault. */ |
| fi->type = ARMFault_Permission; |
| goto do_fault; |
| } |
| } |
| if (ns) { |
| /* The NS bit will (as required by the architecture) have no effect if |
| * the CPU doesn't support TZ or this is a non-secure translation |
| * regime, because the attribute will already be non-secure. |
| */ |
| attrs->secure = false; |
| } |
| *phys_ptr = phys_addr; |
| return false; |
| do_fault: |
| fi->domain = domain; |
| fi->level = level; |
| return true; |
| } |
| |
| /* |
| * check_s2_mmu_setup |
| * @cpu: ARMCPU |
| * @is_aa64: True if the translation regime is in AArch64 state |
| * @startlevel: Suggested starting level |
| * @inputsize: Bitsize of IPAs |
| * @stride: Page-table stride (See the ARM ARM) |
| * |
| * Returns true if the suggested S2 translation parameters are OK and |
| * false otherwise. |
| */ |
| static bool check_s2_mmu_setup(ARMCPU *cpu, bool is_aa64, int level, |
| int inputsize, int stride, int outputsize) |
| { |
| const int grainsize = stride + 3; |
| int startsizecheck; |
| |
| /* |
| * Negative levels are usually not allowed... |
| * Except for FEAT_LPA2, 4k page table, 52-bit address space, which |
| * begins with level -1. Note that previous feature tests will have |
| * eliminated this combination if it is not enabled. |
| */ |
| if (level < (inputsize == 52 && stride == 9 ? -1 : 0)) { |
| return false; |
| } |
| |
| startsizecheck = inputsize - ((3 - level) * stride + grainsize); |
| if (startsizecheck < 1 || startsizecheck > stride + 4) { |
| return false; |
| } |
| |
| if (is_aa64) { |
| switch (stride) { |
| case 13: /* 64KB Pages. */ |
| if (level == 0 || (level == 1 && outputsize <= 42)) { |
| return false; |
| } |
| break; |
| case 11: /* 16KB Pages. */ |
| if (level == 0 || (level == 1 && outputsize <= 40)) { |
| return false; |
| } |
| break; |
| case 9: /* 4KB Pages. */ |
| if (level == 0 && outputsize <= 42) { |
| return false; |
| } |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| |
| /* Inputsize checks. */ |
| if (inputsize > outputsize && |
| (arm_el_is_aa64(&cpu->env, 1) || inputsize > 40)) { |
| /* This is CONSTRAINED UNPREDICTABLE and we choose to fault. */ |
| return false; |
| } |
| } else { |
| /* AArch32 only supports 4KB pages. Assert on that. */ |
| assert(stride == 9); |
| |
| if (level == 0) { |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| /* Translate from the 4-bit stage 2 representation of |
| * memory attributes (without cache-allocation hints) to |
| * the 8-bit representation of the stage 1 MAIR registers |
| * (which includes allocation hints). |
| * |
| * ref: shared/translation/attrs/S2AttrDecode() |
| * .../S2ConvertAttrsHints() |
| */ |
| static uint8_t convert_stage2_attrs(CPUARMState *env, uint8_t s2attrs) |
| { |
| uint8_t hiattr = extract32(s2attrs, 2, 2); |
| uint8_t loattr = extract32(s2attrs, 0, 2); |
| uint8_t hihint = 0, lohint = 0; |
| |
| if (hiattr != 0) { /* normal memory */ |
| if (arm_hcr_el2_eff(env) & HCR_CD) { /* cache disabled */ |
| hiattr = loattr = 1; /* non-cacheable */ |
| } else { |
| if (hiattr != 1) { /* Write-through or write-back */ |
| hihint = 3; /* RW allocate */ |
| } |
| if (loattr != 1) { /* Write-through or write-back */ |
| lohint = 3; /* RW allocate */ |
| } |
| } |
| } |
| |
| return (hiattr << 6) | (hihint << 4) | (loattr << 2) | lohint; |
| } |
| #endif /* !CONFIG_USER_ONLY */ |
| |
| /* This mapping is common between ID_AA64MMFR0.PARANGE and TCR_ELx.{I}PS. */ |
| static const uint8_t pamax_map[] = { |
| [0] = 32, |
| [1] = 36, |
| [2] = 40, |
| [3] = 42, |
| [4] = 44, |
| [5] = 48, |
| [6] = 52, |
| }; |
| |
| /* The cpu-specific constant value of PAMax; also used by hw/arm/virt. */ |
| unsigned int arm_pamax(ARMCPU *cpu) |
| { |
| unsigned int parange = |
| FIELD_EX64(cpu->isar.id_aa64mmfr0, ID_AA64MMFR0, PARANGE); |
| |
| /* |
| * id_aa64mmfr0 is a read-only register so values outside of the |
| * supported mappings can be considered an implementation error. |
| */ |
| assert(parange < ARRAY_SIZE(pamax_map)); |
| return pamax_map[parange]; |
| } |
| |
| static int aa64_va_parameter_tbi(uint64_t tcr, ARMMMUIdx mmu_idx) |
| { |
| if (regime_has_2_ranges(mmu_idx)) { |
| return extract64(tcr, 37, 2); |
| } else if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) { |
| return 0; /* VTCR_EL2 */ |
| } else { |
| /* Replicate the single TBI bit so we always have 2 bits. */ |
| return extract32(tcr, 20, 1) * 3; |
| } |
| } |
| |
| static int aa64_va_parameter_tbid(uint64_t tcr, ARMMMUIdx mmu_idx) |
| { |
| if (regime_has_2_ranges(mmu_idx)) { |
| return extract64(tcr, 51, 2); |
| } else if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) { |
| return 0; /* VTCR_EL2 */ |
| } else { |
| /* Replicate the single TBID bit so we always have 2 bits. */ |
| return extract32(tcr, 29, 1) * 3; |
| } |
| } |
| |
| static int aa64_va_parameter_tcma(uint64_t tcr, ARMMMUIdx mmu_idx) |
| { |
| if (regime_has_2_ranges(mmu_idx)) { |
| return extract64(tcr, 57, 2); |
| } else { |
| /* Replicate the single TCMA bit so we always have 2 bits. */ |
| return extract32(tcr, 30, 1) * 3; |
| } |
| } |
| |
| ARMVAParameters aa64_va_parameters(CPUARMState *env, uint64_t va, |
| ARMMMUIdx mmu_idx, bool data) |
| { |
| uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr; |
| bool epd, hpd, using16k, using64k, tsz_oob, ds; |
| int select, tsz, tbi, max_tsz, min_tsz, ps, sh; |
| ARMCPU *cpu = env_archcpu(env); |
| |
| if (!regime_has_2_ranges(mmu_idx)) { |
| select = 0; |
| tsz = extract32(tcr, 0, 6); |
| using64k = extract32(tcr, 14, 1); |
| using16k = extract32(tcr, 15, 1); |
| if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) { |
| /* VTCR_EL2 */ |
| hpd = false; |
| } else { |
| hpd = extract32(tcr, 24, 1); |
| } |
| epd = false; |
| sh = extract32(tcr, 12, 2); |
| ps = extract32(tcr, 16, 3); |
| ds = extract64(tcr, 32, 1); |
| } else { |
| /* |
| * Bit 55 is always between the two regions, and is canonical for |
| * determining if address tagging is enabled. |
| */ |
| select = extract64(va, 55, 1); |
| if (!select) { |
| tsz = extract32(tcr, 0, 6); |
| epd = extract32(tcr, 7, 1); |
| sh = extract32(tcr, 12, 2); |
| using64k = extract32(tcr, 14, 1); |
| using16k = extract32(tcr, 15, 1); |
| hpd = extract64(tcr, 41, 1); |
| } else { |
| int tg = extract32(tcr, 30, 2); |
| using16k = tg == 1; |
| using64k = tg == 3; |
| tsz = extract32(tcr, 16, 6); |
| epd = extract32(tcr, 23, 1); |
| sh = extract32(tcr, 28, 2); |
| hpd = extract64(tcr, 42, 1); |
| } |
| ps = extract64(tcr, 32, 3); |
| ds = extract64(tcr, 59, 1); |
| } |
| |
| if (cpu_isar_feature(aa64_st, cpu)) { |
| max_tsz = 48 - using64k; |
| } else { |
| max_tsz = 39; |
| } |
| |
| /* |
| * DS is RES0 unless FEAT_LPA2 is supported for the given page size; |
| * adjust the effective value of DS, as documented. |
| */ |
| min_tsz = 16; |
| if (using64k) { |
| if (cpu_isar_feature(aa64_lva, cpu)) { |
| min_tsz = 12; |
| } |
| ds = false; |
| } else if (ds) { |
| switch (mmu_idx) { |
| case ARMMMUIdx_Stage2: |
| case ARMMMUIdx_Stage2_S: |
| if (using16k) { |
| ds = cpu_isar_feature(aa64_tgran16_2_lpa2, cpu); |
| } else { |
| ds = cpu_isar_feature(aa64_tgran4_2_lpa2, cpu); |
| } |
| break; |
| default: |
| if (using16k) { |
| ds = cpu_isar_feature(aa64_tgran16_lpa2, cpu); |
| } else { |
| ds = cpu_isar_feature(aa64_tgran4_lpa2, cpu); |
| } |
| break; |
| } |
| if (ds) { |
| min_tsz = 12; |
| } |
| } |
| |
| if (tsz > max_tsz) { |
| tsz = max_tsz; |
| tsz_oob = true; |
| } else if (tsz < min_tsz) { |
| tsz = min_tsz; |
| tsz_oob = true; |
| } else { |
| tsz_oob = false; |
| } |
| |
| /* Present TBI as a composite with TBID. */ |
| tbi = aa64_va_parameter_tbi(tcr, mmu_idx); |
| if (!data) { |
| tbi &= ~aa64_va_parameter_tbid(tcr, mmu_idx); |
| } |
| tbi = (tbi >> select) & 1; |
| |
| return (ARMVAParameters) { |
| .tsz = tsz, |
| .ps = ps, |
| .sh = sh, |
| .select = select, |
| .tbi = tbi, |
| .epd = epd, |
| .hpd = hpd, |
| .using16k = using16k, |
| .using64k = using64k, |
| .tsz_oob = tsz_oob, |
| .ds = ds, |
| }; |
| } |
| |
| #ifndef CONFIG_USER_ONLY |
| static ARMVAParameters aa32_va_parameters(CPUARMState *env, uint32_t va, |
| ARMMMUIdx mmu_idx) |
| { |
| uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr; |
| uint32_t el = regime_el(env, mmu_idx); |
| int select, tsz; |
| bool epd, hpd; |
| |
| assert(mmu_idx != ARMMMUIdx_Stage2_S); |
| |
| if (mmu_idx == ARMMMUIdx_Stage2) { |
| /* VTCR */ |
| bool sext = extract32(tcr, 4, 1); |
| bool sign = extract32(tcr, 3, 1); |
| |
| /* |
| * If the sign-extend bit is not the same as t0sz[3], the result |
| * is unpredictable. Flag this as a guest error. |
| */ |
| if (sign != sext) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "AArch32: VTCR.S / VTCR.T0SZ[3] mismatch\n"); |
| } |
| tsz = sextract32(tcr, 0, 4) + 8; |
| select = 0; |
| hpd = false; |
| epd = false; |
| } else if (el == 2) { |
| /* HTCR */ |
| tsz = extract32(tcr, 0, 3); |
| select = 0; |
| hpd = extract64(tcr, 24, 1); |
| epd = false; |
| } else { |
| int t0sz = extract32(tcr, 0, 3); |
| int t1sz = extract32(tcr, 16, 3); |
| |
| if (t1sz == 0) { |
| select = va > (0xffffffffu >> t0sz); |
| } else { |
| /* Note that we will detect errors later. */ |
| select = va >= ~(0xffffffffu >> t1sz); |
| } |
| if (!select) { |
| tsz = t0sz; |
| epd = extract32(tcr, 7, 1); |
| hpd = extract64(tcr, 41, 1); |
| } else { |
| tsz = t1sz; |
| epd = extract32(tcr, 23, 1); |
| hpd = extract64(tcr, 42, 1); |
| } |
| /* For aarch32, hpd0 is not enabled without t2e as well. */ |
| hpd &= extract32(tcr, 6, 1); |
| } |
| |
| return (ARMVAParameters) { |
| .tsz = tsz, |
| .select = select, |
| .epd = epd, |
| .hpd = hpd, |
| }; |
| } |
| |
| /** |
| * get_phys_addr_lpae: perform one stage of page table walk, LPAE format |
| * |
| * Returns false if the translation was successful. Otherwise, phys_ptr, attrs, |
| * prot and page_size may not be filled in, and the populated fsr value provides |
| * information on why the translation aborted, in the format of a long-format |
| * DFSR/IFSR fault register, with the following caveats: |
| * * the WnR bit is never set (the caller must do this). |
| * |
| * @env: CPUARMState |
| * @address: virtual address to get physical address for |
| * @access_type: MMU_DATA_LOAD, MMU_DATA_STORE or MMU_INST_FETCH |
| * @mmu_idx: MMU index indicating required translation regime |
| * @s1_is_el0: if @mmu_idx is ARMMMUIdx_Stage2 (so this is a stage 2 page table |
| * walk), must be true if this is stage 2 of a stage 1+2 walk for an |
| * EL0 access). If @mmu_idx is anything else, @s1_is_el0 is ignored. |
| * @phys_ptr: set to the physical address corresponding to the virtual address |
| * @attrs: set to the memory transaction attributes to use |
| * @prot: set to the permissions for the page containing phys_ptr |
| * @page_size_ptr: set to the size of the page containing phys_ptr |
| * @fi: set to fault info if the translation fails |
| * @cacheattrs: (if non-NULL) set to the cacheability/shareability attributes |
| */ |
| static bool get_phys_addr_lpae(CPUARMState *env, uint64_t address, |
| MMUAccessType access_type, ARMMMUIdx mmu_idx, |
| bool s1_is_el0, |
| hwaddr *phys_ptr, MemTxAttrs *txattrs, int *prot, |
| target_ulong *page_size_ptr, |
| ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| CPUState *cs = CPU(cpu); |
| /* Read an LPAE long-descriptor translation table. */ |
| ARMFaultType fault_type = ARMFault_Translation; |
| uint32_t level; |
| ARMVAParameters param; |
| uint64_t ttbr; |
| hwaddr descaddr, indexmask, indexmask_grainsize; |
| uint32_t tableattrs; |
| target_ulong page_size; |
| uint32_t attrs; |
| int32_t stride; |
| int addrsize, inputsize, outputsize; |
| TCR *tcr = regime_tcr(env, mmu_idx); |
| int ap, ns, xn, pxn; |
| uint32_t el = regime_el(env, mmu_idx); |
| uint64_t descaddrmask; |
| bool aarch64 = arm_el_is_aa64(env, el); |
| bool guarded = false; |
| |
| /* TODO: This code does not support shareability levels. */ |
| if (aarch64) { |
| int ps; |
| |
| param = aa64_va_parameters(env, address, mmu_idx, |
| access_type != MMU_INST_FETCH); |
| level = 0; |
| |
| /* |
| * If TxSZ is programmed to a value larger than the maximum, |
| * or smaller than the effective minimum, it is IMPLEMENTATION |
| * DEFINED whether we behave as if the field were programmed |
| * within bounds, or if a level 0 Translation fault is generated. |
| * |
| * With FEAT_LVA, fault on less than minimum becomes required, |
| * so our choice is to always raise the fault. |
| */ |
| if (param.tsz_oob) { |
| fault_type = ARMFault_Translation; |
| goto do_fault; |
| } |
| |
| addrsize = 64 - 8 * param.tbi; |
| inputsize = 64 - param.tsz; |
| |
| /* |
| * Bound PS by PARANGE to find the effective output address size. |
| * ID_AA64MMFR0 is a read-only register so values outside of the |
| * supported mappings can be considered an implementation error. |
| */ |
| ps = FIELD_EX64(cpu->isar.id_aa64mmfr0, ID_AA64MMFR0, PARANGE); |
| ps = MIN(ps, param.ps); |
| assert(ps < ARRAY_SIZE(pamax_map)); |
| outputsize = pamax_map[ps]; |
| } else { |
| param = aa32_va_parameters(env, address, mmu_idx); |
| level = 1; |
| addrsize = (mmu_idx == ARMMMUIdx_Stage2 ? 40 : 32); |
| inputsize = addrsize - param.tsz; |
| outputsize = 40; |
| } |
| |
| /* |
| * We determined the region when collecting the parameters, but we |
| * have not yet validated that the address is valid for the region. |
| * Extract the top bits and verify that they all match select. |
| * |
| * For aa32, if inputsize == addrsize, then we have selected the |
| * region by exclusion in aa32_va_parameters and there is no more |
| * validation to do here. |
| */ |
| if (inputsize < addrsize) { |
| target_ulong top_bits = sextract64(address, inputsize, |
| addrsize - inputsize); |
| if (-top_bits != param.select) { |
| /* The gap between the two regions is a Translation fault */ |
| fault_type = ARMFault_Translation; |
| goto do_fault; |
| } |
| } |
| |
| if (param.using64k) { |
| stride = 13; |
| } else if (param.using16k) { |
| stride = 11; |
| } else { |
| stride = 9; |
| } |
| |
| /* Note that QEMU ignores shareability and cacheability attributes, |
| * so we don't need to do anything with the SH, ORGN, IRGN fields |
| * in the TTBCR. Similarly, TTBCR:A1 selects whether we get the |
| * ASID from TTBR0 or TTBR1, but QEMU's TLB doesn't currently |
| * implement any ASID-like capability so we can ignore it (instead |
| * we will always flush the TLB any time the ASID is changed). |
| */ |
| ttbr = regime_ttbr(env, mmu_idx, param.select); |
| |
| /* Here we should have set up all the parameters for the translation: |
| * inputsize, ttbr, epd, stride, tbi |
| */ |
| |
| if (param.epd) { |
| /* Translation table walk disabled => Translation fault on TLB miss |
| * Note: This is always 0 on 64-bit EL2 and EL3. |
| */ |
| goto do_fault; |
| } |
| |
| if (mmu_idx != ARMMMUIdx_Stage2 && mmu_idx != ARMMMUIdx_Stage2_S) { |
| /* The starting level depends on the virtual address size (which can |
| * be up to 48 bits) and the translation granule size. It indicates |
| * the number of strides (stride bits at a time) needed to |
| * consume the bits of the input address. In the pseudocode this is: |
| * level = 4 - RoundUp((inputsize - grainsize) / stride) |
| * where their 'inputsize' is our 'inputsize', 'grainsize' is |
| * our 'stride + 3' and 'stride' is our 'stride'. |
| * Applying the usual "rounded up m/n is (m+n-1)/n" and simplifying: |
| * = 4 - (inputsize - stride - 3 + stride - 1) / stride |
| * = 4 - (inputsize - 4) / stride; |
| */ |
| level = 4 - (inputsize - 4) / stride; |
| } else { |
| /* For stage 2 translations the starting level is specified by the |
| * VTCR_EL2.SL0 field (whose interpretation depends on the page size) |
| */ |
| uint32_t sl0 = extract32(tcr->raw_tcr, 6, 2); |
| uint32_t sl2 = extract64(tcr->raw_tcr, 33, 1); |
| uint32_t startlevel; |
| bool ok; |
| |
| /* SL2 is RES0 unless DS=1 & 4kb granule. */ |
| if (param.ds && stride == 9 && sl2) { |
| if (sl0 != 0) { |
| level = 0; |
| fault_type = ARMFault_Translation; |
| goto do_fault; |
| } |
| startlevel = -1; |
| } else if (!aarch64 || stride == 9) { |
| /* AArch32 or 4KB pages */ |
| startlevel = 2 - sl0; |
| |
| if (cpu_isar_feature(aa64_st, cpu)) { |
| startlevel &= 3; |
| } |
| } else { |
| /* 16KB or 64KB pages */ |
| startlevel = 3 - sl0; |
| } |
| |
| /* Check that the starting level is valid. */ |
| ok = check_s2_mmu_setup(cpu, aarch64, startlevel, |
| inputsize, stride, outputsize); |
| if (!ok) { |
| fault_type = ARMFault_Translation; |
| goto do_fault; |
| } |
| level = startlevel; |
| } |
| |
| indexmask_grainsize = MAKE_64BIT_MASK(0, stride + 3); |
| indexmask = MAKE_64BIT_MASK(0, inputsize - (stride * (4 - level))); |
| |
| /* Now we can extract the actual base address from the TTBR */ |
| descaddr = extract64(ttbr, 0, 48); |
| |
| /* |
| * For FEAT_LPA and PS=6, bits [51:48] of descaddr are in [5:2] of TTBR. |
| * |
| * Otherwise, if the base address is out of range, raise AddressSizeFault. |
| * In the pseudocode, this is !IsZero(baseregister<47:outputsize>), |
| * but we've just cleared the bits above 47, so simplify the test. |
| */ |
| if (outputsize > 48) { |
| descaddr |= extract64(ttbr, 2, 4) << 48; |
| } else if (descaddr >> outputsize) { |
| level = 0; |
| fault_type = ARMFault_AddressSize; |
| goto do_fault; |
| } |
| |
| /* |
| * We rely on this masking to clear the RES0 bits at the bottom of the TTBR |
| * and also to mask out CnP (bit 0) which could validly be non-zero. |
| */ |
| descaddr &= ~indexmask; |
| |
| /* |
| * For AArch32, the address field in the descriptor goes up to bit 39 |
| * for both v7 and v8. However, for v8 the SBZ bits [47:40] must be 0 |
| * or an AddressSize fault is raised. So for v8 we extract those SBZ |
| * bits as part of the address, which will be checked via outputsize. |
| * For AArch64, the address field goes up to bit 47, or 49 with FEAT_LPA2; |
| * the highest bits of a 52-bit output are placed elsewhere. |
| */ |
| if (param.ds) { |
| descaddrmask = MAKE_64BIT_MASK(0, 50); |
| } else if (arm_feature(env, ARM_FEATURE_V8)) { |
| descaddrmask = MAKE_64BIT_MASK(0, 48); |
| } else { |
| descaddrmask = MAKE_64BIT_MASK(0, 40); |
| } |
| descaddrmask &= ~indexmask_grainsize; |
| |
| /* Secure accesses start with the page table in secure memory and |
| * can be downgraded to non-secure at any step. Non-secure accesses |
| * remain non-secure. We implement this by just ORing in the NSTable/NS |
| * bits at each step. |
| */ |
| tableattrs = regime_is_secure(env, mmu_idx) ? 0 : (1 << 4); |
| for (;;) { |
| uint64_t descriptor; |
| bool nstable; |
| |
| descaddr |= (address >> (stride * (4 - level))) & indexmask; |
| descaddr &= ~7ULL; |
| nstable = extract32(tableattrs, 4, 1); |
| descriptor = arm_ldq_ptw(cs, descaddr, !nstable, mmu_idx, fi); |
| if (fi->type != ARMFault_None) { |
| goto do_fault; |
| } |
| |
| if (!(descriptor & 1) || |
| (!(descriptor & 2) && (level == 3))) { |
| /* Invalid, or the Reserved level 3 encoding */ |
| goto do_fault; |
| } |
| |
| descaddr = descriptor & descaddrmask; |
| |
| /* |
| * For FEAT_LPA and PS=6, bits [51:48] of descaddr are in [15:12] |
| * of descriptor. For FEAT_LPA2 and effective DS, bits [51:50] of |
| * descaddr are in [9:8]. Otherwise, if descaddr is out of range, |
| * raise AddressSizeFault. |
| */ |
| if (outputsize > 48) { |
| if (param.ds) { |
| descaddr |= extract64(descriptor, 8, 2) << 50; |
| } else { |
| descaddr |= extract64(descriptor, 12, 4) << 48; |
| } |
| } else if (descaddr >> outputsize) { |
| fault_type = ARMFault_AddressSize; |
| goto do_fault; |
| } |
| |
| if ((descriptor & 2) && (level < 3)) { |
| /* Table entry. The top five bits are attributes which may |
| * propagate down through lower levels of the table (and |
| * which are all arranged so that 0 means "no effect", so |
| * we can gather them up by ORing in the bits at each level). |
| */ |
| tableattrs |= extract64(descriptor, 59, 5); |
| level++; |
| indexmask = indexmask_grainsize; |
| continue; |
| } |
| /* |
| * Block entry at level 1 or 2, or page entry at level 3. |
| * These are basically the same thing, although the number |
| * of bits we pull in from the vaddr varies. Note that although |
| * descaddrmask masks enough of the low bits of the descriptor |
| * to give a correct page or table address, the address field |
| * in a block descriptor is smaller; so we need to explicitly |
| * clear the lower bits here before ORing in the low vaddr bits. |
| */ |
| page_size = (1ULL << ((stride * (4 - level)) + 3)); |
| descaddr &= ~(page_size - 1); |
| descaddr |= (address & (page_size - 1)); |
| /* Extract attributes from the descriptor */ |
| attrs = extract64(descriptor, 2, 10) |
| | (extract64(descriptor, 52, 12) << 10); |
| |
| if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) { |
| /* Stage 2 table descriptors do not include any attribute fields */ |
| break; |
| } |
| /* Merge in attributes from table descriptors */ |
| attrs |= nstable << 3; /* NS */ |
| guarded = extract64(descriptor, 50, 1); /* GP */ |
| if (param.hpd) { |
| /* HPD disables all the table attributes except NSTable. */ |
| break; |
| } |
| attrs |= extract32(tableattrs, 0, 2) << 11; /* XN, PXN */ |
| /* The sense of AP[1] vs APTable[0] is reversed, as APTable[0] == 1 |
| * means "force PL1 access only", which means forcing AP[1] to 0. |
| */ |
| attrs &= ~(extract32(tableattrs, 2, 1) << 4); /* !APT[0] => AP[1] */ |
| attrs |= extract32(tableattrs, 3, 1) << 5; /* APT[1] => AP[2] */ |
| break; |
| } |
| /* Here descaddr is the final physical address, and attributes |
| * are all in attrs. |
| */ |
| fault_type = ARMFault_AccessFlag; |
| if ((attrs & (1 << 8)) == 0) { |
| /* Access flag */ |
| goto do_fault; |
| } |
| |
| ap = extract32(attrs, 4, 2); |
| |
| if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) { |
| ns = mmu_idx == ARMMMUIdx_Stage2; |
| xn = extract32(attrs, 11, 2); |
| *prot = get_S2prot(env, ap, xn, s1_is_el0); |
| } else { |
| ns = extract32(attrs, 3, 1); |
| xn = extract32(attrs, 12, 1); |
| pxn = extract32(attrs, 11, 1); |
| *prot = get_S1prot(env, mmu_idx, aarch64, ap, ns, xn, pxn); |
| } |
| |
| fault_type = ARMFault_Permission; |
| if (!(*prot & (1 << access_type))) { |
| goto do_fault; |
| } |
| |
| if (ns) { |
| /* The NS bit will (as required by the architecture) have no effect if |
| * the CPU doesn't support TZ or this is a non-secure translation |
| * regime, because the attribute will already be non-secure. |
| */ |
| txattrs->secure = false; |
| } |
| /* When in aarch64 mode, and BTI is enabled, remember GP in the IOTLB. */ |
| if (aarch64 && guarded && cpu_isar_feature(aa64_bti, cpu)) { |
| arm_tlb_bti_gp(txattrs) = true; |
| } |
| |
| if (mmu_idx == ARMMMUIdx_Stage2 || mmu_idx == ARMMMUIdx_Stage2_S) { |
| cacheattrs->attrs = convert_stage2_attrs(env, extract32(attrs, 0, 4)); |
| } else { |
| /* Index into MAIR registers for cache attributes */ |
| uint8_t attrindx = extract32(attrs, 0, 3); |
| uint64_t mair = env->cp15.mair_el[regime_el(env, mmu_idx)]; |
| assert(attrindx <= 7); |
| cacheattrs->attrs = extract64(mair, attrindx * 8, 8); |
| } |
| |
| /* |
| * For FEAT_LPA2 and effective DS, the SH field in the attributes |
| * was re-purposed for output address bits. The SH attribute in |
| * that case comes from TCR_ELx, which we extracted earlier. |
| */ |
| if (param.ds) { |
| cacheattrs->shareability = param.sh; |
| } else { |
| cacheattrs->shareability = extract32(attrs, 6, 2); |
| } |
| |
| *phys_ptr = descaddr; |
| *page_size_ptr = page_size; |
| return false; |
| |
| do_fault: |
| fi->type = fault_type; |
| fi->level = level; |
| /* Tag the error as S2 for failed S1 PTW at S2 or ordinary S2. */ |
| fi->stage2 = fi->s1ptw || (mmu_idx == ARMMMUIdx_Stage2 || |
| mmu_idx == ARMMMUIdx_Stage2_S); |
| fi->s1ns = mmu_idx == ARMMMUIdx_Stage2; |
| return true; |
| } |
| |
| static inline void get_phys_addr_pmsav7_default(CPUARMState *env, |
| ARMMMUIdx mmu_idx, |
| int32_t address, int *prot) |
| { |
| if (!arm_feature(env, ARM_FEATURE_M)) { |
| *prot = PAGE_READ | PAGE_WRITE; |
| switch (address) { |
| case 0xF0000000 ... 0xFFFFFFFF: |
| if (regime_sctlr(env, mmu_idx) & SCTLR_V) { |
| /* hivecs execing is ok */ |
| *prot |= PAGE_EXEC; |
| } |
| break; |
| case 0x00000000 ... 0x7FFFFFFF: |
| *prot |= PAGE_EXEC; |
| break; |
| } |
| } else { |
| /* Default system address map for M profile cores. |
| * The architecture specifies which regions are execute-never; |
| * at the MPU level no other checks are defined. |
| */ |
| switch (address) { |
| case 0x00000000 ... 0x1fffffff: /* ROM */ |
| case 0x20000000 ... 0x3fffffff: /* SRAM */ |
| case 0x60000000 ... 0x7fffffff: /* RAM */ |
| case 0x80000000 ... 0x9fffffff: /* RAM */ |
| *prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC; |
| break; |
| case 0x40000000 ... 0x5fffffff: /* Peripheral */ |
| case 0xa0000000 ... 0xbfffffff: /* Device */ |
| case 0xc0000000 ... 0xdfffffff: /* Device */ |
| case 0xe0000000 ... 0xffffffff: /* System */ |
| *prot = PAGE_READ | PAGE_WRITE; |
| break; |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| } |
| |
| static bool pmsav7_use_background_region(ARMCPU *cpu, |
| ARMMMUIdx mmu_idx, bool is_user) |
| { |
| /* Return true if we should use the default memory map as a |
| * "background" region if there are no hits against any MPU regions. |
| */ |
| CPUARMState *env = &cpu->env; |
| |
| if (is_user) { |
| return false; |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_M)) { |
| return env->v7m.mpu_ctrl[regime_is_secure(env, mmu_idx)] |
| & R_V7M_MPU_CTRL_PRIVDEFENA_MASK; |
| } else { |
| return regime_sctlr(env, mmu_idx) & SCTLR_BR; |
| } |
| } |
| |
| static inline bool m_is_ppb_region(CPUARMState *env, uint32_t address) |
| { |
| /* True if address is in the M profile PPB region 0xe0000000 - 0xe00fffff */ |
| return arm_feature(env, ARM_FEATURE_M) && |
| extract32(address, 20, 12) == 0xe00; |
| } |
| |
| static inline bool m_is_system_region(CPUARMState *env, uint32_t address) |
| { |
| /* True if address is in the M profile system region |
| * 0xe0000000 - 0xffffffff |
| */ |
| return arm_feature(env, ARM_FEATURE_M) && extract32(address, 29, 3) == 0x7; |
| } |
| |
| static bool get_phys_addr_pmsav7(CPUARMState *env, uint32_t address, |
| MMUAccessType access_type, ARMMMUIdx mmu_idx, |
| hwaddr *phys_ptr, int *prot, |
| target_ulong *page_size, |
| ARMMMUFaultInfo *fi) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| int n; |
| bool is_user = regime_is_user(env, mmu_idx); |
| |
| *phys_ptr = address; |
| *page_size = TARGET_PAGE_SIZE; |
| *prot = 0; |
| |
| if (regime_translation_disabled(env, mmu_idx) || |
| m_is_ppb_region(env, address)) { |
| /* MPU disabled or M profile PPB access: use default memory map. |
| * The other case which uses the default memory map in the |
| * v7M ARM ARM pseudocode is exception vector reads from the vector |
| * table. In QEMU those accesses are done in arm_v7m_load_vector(), |
| * which always does a direct read using address_space_ldl(), rather |
| * than going via this function, so we don't need to check that here. |
| */ |
| get_phys_addr_pmsav7_default(env, mmu_idx, address, prot); |
| } else { /* MPU enabled */ |
| for (n = (int)cpu->pmsav7_dregion - 1; n >= 0; n--) { |
| /* region search */ |
| uint32_t base = env->pmsav7.drbar[n]; |
| uint32_t rsize = extract32(env->pmsav7.drsr[n], 1, 5); |
| uint32_t rmask; |
| bool srdis = false; |
| |
| if (!(env->pmsav7.drsr[n] & 0x1)) { |
| continue; |
| } |
| |
| if (!rsize) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "DRSR[%d]: Rsize field cannot be 0\n", n); |
| continue; |
| } |
| rsize++; |
| rmask = (1ull << rsize) - 1; |
| |
| if (base & rmask) { |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "DRBAR[%d]: 0x%" PRIx32 " misaligned " |
| "to DRSR region size, mask = 0x%" PRIx32 "\n", |
| n, base, rmask); |
| continue; |
| } |
| |
| if (address < base || address > base + rmask) { |
| /* |
| * Address not in this region. We must check whether the |
| * region covers addresses in the same page as our address. |
| * In that case we must not report a size that covers the |
| * whole page for a subsequent hit against a different MPU |
| * region or the background region, because it would result in |
| * incorrect TLB hits for subsequent accesses to addresses that |
| * are in this MPU region. |
| */ |
| if (ranges_overlap(base, rmask, |
| address & TARGET_PAGE_MASK, |
| TARGET_PAGE_SIZE)) { |
| *page_size = 1; |
| } |
| continue; |
| } |
| |
| /* Region matched */ |
| |
| if (rsize >= 8) { /* no subregions for regions < 256 bytes */ |
| int i, snd; |
| uint32_t srdis_mask; |
| |
| rsize -= 3; /* sub region size (power of 2) */ |
| snd = ((address - base) >> rsize) & 0x7; |
| srdis = extract32(env->pmsav7.drsr[n], snd + 8, 1); |
| |
| srdis_mask = srdis ? 0x3 : 0x0; |
| for (i = 2; i <= 8 && rsize < TARGET_PAGE_BITS; i *= 2) { |
| /* This will check in groups of 2, 4 and then 8, whether |
| * the subregion bits are consistent. rsize is incremented |
| * back up to give the region size, considering consistent |
| * adjacent subregions as one region. Stop testing if rsize |
| * is already big enough for an entire QEMU page. |
| */ |
| int snd_rounded = snd & ~(i - 1); |
| uint32_t srdis_multi = extract32(env->pmsav7.drsr[n], |
| snd_rounded + 8, i); |
| if (srdis_mask ^ srdis_multi) { |
| break; |
| } |
| srdis_mask = (srdis_mask << i) | srdis_mask; |
| rsize++; |
| } |
| } |
| if (srdis) { |
| continue; |
| } |
| if (rsize < TARGET_PAGE_BITS) { |
| *page_size = 1 << rsize; |
| } |
| break; |
| } |
| |
| if (n == -1) { /* no hits */ |
| if (!pmsav7_use_background_region(cpu, mmu_idx, is_user)) { |
| /* background fault */ |
| fi->type = ARMFault_Background; |
| return true; |
| } |
| get_phys_addr_pmsav7_default(env, mmu_idx, address, prot); |
| } else { /* a MPU hit! */ |
| uint32_t ap = extract32(env->pmsav7.dracr[n], 8, 3); |
| uint32_t xn = extract32(env->pmsav7.dracr[n], 12, 1); |
| |
| if (m_is_system_region(env, address)) { |
| /* System space is always execute never */ |
| xn = 1; |
| } |
| |
| if (is_user) { /* User mode AP bit decoding */ |
| switch (ap) { |
| case 0: |
| case 1: |
| case 5: |
| break; /* no access */ |
| case 3: |
| *prot |= PAGE_WRITE; |
| /* fall through */ |
| case 2: |
| case 6: |
| *prot |= PAGE_READ | PAGE_EXEC; |
| break; |
| case 7: |
| /* for v7M, same as 6; for R profile a reserved value */ |
| if (arm_feature(env, ARM_FEATURE_M)) { |
| *prot |= PAGE_READ | PAGE_EXEC; |
| break; |
| } |
| /* fall through */ |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "DRACR[%d]: Bad value for AP bits: 0x%" |
| PRIx32 "\n", n, ap); |
| } |
| } else { /* Priv. mode AP bits decoding */ |
| switch (ap) { |
| case 0: |
| break; /* no access */ |
| case 1: |
| case 2: |
| case 3: |
| *prot |= PAGE_WRITE; |
| /* fall through */ |
| case 5: |
| case 6: |
| *prot |= PAGE_READ | PAGE_EXEC; |
| break; |
| case 7: |
| /* for v7M, same as 6; for R profile a reserved value */ |
| if (arm_feature(env, ARM_FEATURE_M)) { |
| *prot |= PAGE_READ | PAGE_EXEC; |
| break; |
| } |
| /* fall through */ |
| default: |
| qemu_log_mask(LOG_GUEST_ERROR, |
| "DRACR[%d]: Bad value for AP bits: 0x%" |
| PRIx32 "\n", n, ap); |
| } |
| } |
| |
| /* execute never */ |
| if (xn) { |
| *prot &= ~PAGE_EXEC; |
| } |
| } |
| } |
| |
| fi->type = ARMFault_Permission; |
| fi->level = 1; |
| return !(*prot & (1 << access_type)); |
| } |
| |
| static bool v8m_is_sau_exempt(CPUARMState *env, |
| uint32_t address, MMUAccessType access_type) |
| { |
| /* The architecture specifies that certain address ranges are |
| * exempt from v8M SAU/IDAU checks. |
| */ |
| return |
| (access_type == MMU_INST_FETCH && m_is_system_region(env, address)) || |
| (address >= 0xe0000000 && address <= 0xe0002fff) || |
| (address >= 0xe000e000 && address <= 0xe000efff) || |
| (address >= 0xe002e000 && address <= 0xe002efff) || |
| (address >= 0xe0040000 && address <= 0xe0041fff) || |
| (address >= 0xe00ff000 && address <= 0xe00fffff); |
| } |
| |
| void v8m_security_lookup(CPUARMState *env, uint32_t address, |
| MMUAccessType access_type, ARMMMUIdx mmu_idx, |
| V8M_SAttributes *sattrs) |
| { |
| /* Look up the security attributes for this address. Compare the |
| * pseudocode SecurityCheck() function. |
| * We assume the caller has zero-initialized *sattrs. |
| */ |
| ARMCPU *cpu = env_archcpu(env); |
| int r; |
| bool idau_exempt = false, idau_ns = true, idau_nsc = true; |
| int idau_region = IREGION_NOTVALID; |
| uint32_t addr_page_base = address & TARGET_PAGE_MASK; |
| uint32_t addr_page_limit = addr_page_base + (TARGET_PAGE_SIZE - 1); |
| |
| if (cpu->idau) { |
| IDAUInterfaceClass *iic = IDAU_INTERFACE_GET_CLASS(cpu->idau); |
| IDAUInterface *ii = IDAU_INTERFACE(cpu->idau); |
| |
| iic->check(ii, address, &idau_region, &idau_exempt, &idau_ns, |
| &idau_nsc); |
| } |
| |
| if (access_type == MMU_INST_FETCH && extract32(address, 28, 4) == 0xf) { |
| /* 0xf0000000..0xffffffff is always S for insn fetches */ |
| return; |
| } |
| |
| if (idau_exempt || v8m_is_sau_exempt(env, address, access_type)) { |
| sattrs->ns = !regime_is_secure(env, mmu_idx); |
| return; |
| } |
| |
| if (idau_region != IREGION_NOTVALID) { |
| sattrs->irvalid = true; |
| sattrs->iregion = idau_region; |
| } |
| |
| switch (env->sau.ctrl & 3) { |
| case 0: /* SAU.ENABLE == 0, SAU.ALLNS == 0 */ |
| break; |
| case 2: /* SAU.ENABLE == 0, SAU.ALLNS == 1 */ |
| sattrs->ns = true; |
| break; |
| default: /* SAU.ENABLE == 1 */ |
| for (r = 0; r < cpu->sau_sregion; r++) { |
| if (env->sau.rlar[r] & 1) { |
| uint32_t base = env->sau.rbar[r] & ~0x1f; |
| uint32_t limit = env->sau.rlar[r] | 0x1f; |
| |
| if (base <= address && limit >= address) { |
| if (base > addr_page_base || limit < addr_page_limit) { |
| sattrs->subpage = true; |
| } |
| if (sattrs->srvalid) { |
| /* If we hit in more than one region then we must report |
| * as Secure, not NS-Callable, with no valid region |
| * number info. |
| */ |
| sattrs->ns = false; |
| sattrs->nsc = false; |
| sattrs->sregion = 0; |
| sattrs->srvalid = false; |
| break; |
| } else { |
| if (env->sau.rlar[r] & 2) { |
| sattrs->nsc = true; |
| } else { |
| sattrs->ns = true; |
| } |
| sattrs->srvalid = true; |
| sattrs->sregion = r; |
| } |
| } else { |
| /* |
| * Address not in this region. We must check whether the |
| * region covers addresses in the same page as our address. |
| * In that case we must not report a size that covers the |
| * whole page for a subsequent hit against a different MPU |
| * region or the background region, because it would result |
| * in incorrect TLB hits for subsequent accesses to |
| * addresses that are in this MPU region. |
| */ |
| if (limit >= base && |
| ranges_overlap(base, limit - base + 1, |
| addr_page_base, |
| TARGET_PAGE_SIZE)) { |
| sattrs->subpage = true; |
| } |
| } |
| } |
| } |
| break; |
| } |
| |
| /* |
| * The IDAU will override the SAU lookup results if it specifies |
| * higher security than the SAU does. |
| */ |
| if (!idau_ns) { |
| if (sattrs->ns || (!idau_nsc && sattrs->nsc)) { |
| sattrs->ns = false; |
| sattrs->nsc = idau_nsc; |
| } |
| } |
| } |
| |
| bool pmsav8_mpu_lookup(CPUARMState *env, uint32_t address, |
| MMUAccessType access_type, ARMMMUIdx mmu_idx, |
| hwaddr *phys_ptr, MemTxAttrs *txattrs, |
| int *prot, bool *is_subpage, |
| ARMMMUFaultInfo *fi, uint32_t *mregion) |
| { |
| /* Perform a PMSAv8 MPU lookup (without also doing the SAU check |
| * that a full phys-to-virt translation does). |
| * mregion is (if not NULL) set to the region number which matched, |
| * or -1 if no region number is returned (MPU off, address did not |
| * hit a region, address hit in multiple regions). |
| * We set is_subpage to true if the region hit doesn't cover the |
| * entire TARGET_PAGE the address is within. |
| */ |
| ARMCPU *cpu = env_archcpu(env); |
| bool is_user = regime_is_user(env, mmu_idx); |
| uint32_t secure = regime_is_secure(env, mmu_idx); |
| int n; |
| int matchregion = -1; |
| bool hit = false; |
| uint32_t addr_page_base = address & TARGET_PAGE_MASK; |
| uint32_t addr_page_limit = addr_page_base + (TARGET_PAGE_SIZE - 1); |
| |
| *is_subpage = false; |
| *phys_ptr = address; |
| *prot = 0; |
| if (mregion) { |
| *mregion = -1; |
| } |
| |
| /* Unlike the ARM ARM pseudocode, we don't need to check whether this |
| * was an exception vector read from the vector table (which is always |
| * done using the default system address map), because those accesses |
| * are done in arm_v7m_load_vector(), which always does a direct |
| * read using address_space_ldl(), rather than going via this function. |
| */ |
| if (regime_translation_disabled(env, mmu_idx)) { /* MPU disabled */ |
| hit = true; |
| } else if (m_is_ppb_region(env, address)) { |
| hit = true; |
| } else { |
| if (pmsav7_use_background_region(cpu, mmu_idx, is_user)) { |
| hit = true; |
| } |
| |
| for (n = (int)cpu->pmsav7_dregion - 1; n >= 0; n--) { |
| /* region search */ |
| /* Note that the base address is bits [31:5] from the register |
| * with bits [4:0] all zeroes, but the limit address is bits |
| * [31:5] from the register with bits [4:0] all ones. |
| */ |
| uint32_t base = env->pmsav8.rbar[secure][n] & ~0x1f; |
| uint32_t limit = env->pmsav8.rlar[secure][n] | 0x1f; |
| |
| if (!(env->pmsav8.rlar[secure][n] & 0x1)) { |
| /* Region disabled */ |
| continue; |
| } |
| |
| if (address < base || address > limit) { |
| /* |
| * Address not in this region. We must check whether the |
| * region covers addresses in the same page as our address. |
| * In that case we must not report a size that covers the |
| * whole page for a subsequent hit against a different MPU |
| * region or the background region, because it would result in |
| * incorrect TLB hits for subsequent accesses to addresses that |
| * are in this MPU region. |
| */ |
| if (limit >= base && |
| ranges_overlap(base, limit - base + 1, |
| addr_page_base, |
| TARGET_PAGE_SIZE)) { |
| *is_subpage = true; |
| } |
| continue; |
| } |
| |
| if (base > addr_page_base || limit < addr_page_limit) { |
| *is_subpage = true; |
| } |
| |
| if (matchregion != -1) { |
| /* Multiple regions match -- always a failure (unlike |
| * PMSAv7 where highest-numbered-region wins) |
| */ |
| fi->type = ARMFault_Permission; |
| fi->level = 1; |
| return true; |
| } |
| |
| matchregion = n; |
| hit = true; |
| } |
| } |
| |
| if (!hit) { |
| /* background fault */ |
| fi->type = ARMFault_Background; |
| return true; |
| } |
| |
| if (matchregion == -1) { |
| /* hit using the background region */ |
| get_phys_addr_pmsav7_default(env, mmu_idx, address, prot); |
| } else { |
| uint32_t ap = extract32(env->pmsav8.rbar[secure][matchregion], 1, 2); |
| uint32_t xn = extract32(env->pmsav8.rbar[secure][matchregion], 0, 1); |
| bool pxn = false; |
| |
| if (arm_feature(env, ARM_FEATURE_V8_1M)) { |
| pxn = extract32(env->pmsav8.rlar[secure][matchregion], 4, 1); |
| } |
| |
| if (m_is_system_region(env, address)) { |
| /* System space is always execute never */ |
| xn = 1; |
| } |
| |
| *prot = simple_ap_to_rw_prot(env, mmu_idx, ap); |
| if (*prot && !xn && !(pxn && !is_user)) { |
| *prot |= PAGE_EXEC; |
| } |
| /* We don't need to look the attribute up in the MAIR0/MAIR1 |
| * registers because that only tells us about cacheability. |
| */ |
| if (mregion) { |
| *mregion = matchregion; |
| } |
| } |
| |
| fi->type = ARMFault_Permission; |
| fi->level = 1; |
| return !(*prot & (1 << access_type)); |
| } |
| |
| |
| static bool get_phys_addr_pmsav8(CPUARMState *env, uint32_t address, |
| MMUAccessType access_type, ARMMMUIdx mmu_idx, |
| hwaddr *phys_ptr, MemTxAttrs *txattrs, |
| int *prot, target_ulong *page_size, |
| ARMMMUFaultInfo *fi) |
| { |
| uint32_t secure = regime_is_secure(env, mmu_idx); |
| V8M_SAttributes sattrs = {}; |
| bool ret; |
| bool mpu_is_subpage; |
| |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY)) { |
| v8m_security_lookup(env, address, access_type, mmu_idx, &sattrs); |
| if (access_type == MMU_INST_FETCH) { |
| /* Instruction fetches always use the MMU bank and the |
| * transaction attribute determined by the fetch address, |
| * regardless of CPU state. This is painful for QEMU |
| * to handle, because it would mean we need to encode |
| * into the mmu_idx not just the (user, negpri) information |
| * for the current security state but also that for the |
| * other security state, which would balloon the number |
| * of mmu_idx values needed alarmingly. |
| * Fortunately we can avoid this because it's not actually |
| * possible to arbitrarily execute code from memory with |
| * the wrong security attribute: it will always generate |
| * an exception of some kind or another, apart from the |
| * special case of an NS CPU executing an SG instruction |
| * in S&NSC memory. So we always just fail the translation |
| * here and sort things out in the exception handler |
| * (including possibly emulating an SG instruction). |
| */ |
| if (sattrs.ns != !secure) { |
| if (sattrs.nsc) { |
| fi->type = ARMFault_QEMU_NSCExec; |
| } else { |
| fi->type = ARMFault_QEMU_SFault; |
| } |
| *page_size = sattrs.subpage ? 1 : TARGET_PAGE_SIZE; |
| *phys_ptr = address; |
| *prot = 0; |
| return true; |
| } |
| } else { |
| /* For data accesses we always use the MMU bank indicated |
| * by the current CPU state, but the security attributes |
| * might downgrade a secure access to nonsecure. |
| */ |
| if (sattrs.ns) { |
| txattrs->secure = false; |
| } else if (!secure) { |
| /* NS access to S memory must fault. |
| * Architecturally we should first check whether the |
| * MPU information for this address indicates that we |
| * are doing an unaligned access to Device memory, which |
| * should generate a UsageFault instead. QEMU does not |
| * currently check for that kind of unaligned access though. |
| * If we added it we would need to do so as a special case |
| * for M_FAKE_FSR_SFAULT in arm_v7m_cpu_do_interrupt(). |
| */ |
| fi->type = ARMFault_QEMU_SFault; |
| *page_size = sattrs.subpage ? 1 : TARGET_PAGE_SIZE; |
| *phys_ptr = address; |
| *prot = 0; |
| return true; |
| } |
| } |
| } |
| |
| ret = pmsav8_mpu_lookup(env, address, access_type, mmu_idx, phys_ptr, |
| txattrs, prot, &mpu_is_subpage, fi, NULL); |
| *page_size = sattrs.subpage || mpu_is_subpage ? 1 : TARGET_PAGE_SIZE; |
| return ret; |
| } |
| |
| static bool get_phys_addr_pmsav5(CPUARMState *env, uint32_t address, |
| MMUAccessType access_type, ARMMMUIdx mmu_idx, |
| hwaddr *phys_ptr, int *prot, |
| ARMMMUFaultInfo *fi) |
| { |
| int n; |
| uint32_t mask; |
| uint32_t base; |
| bool is_user = regime_is_user(env, mmu_idx); |
| |
| if (regime_translation_disabled(env, mmu_idx)) { |
| /* MPU disabled. */ |
| *phys_ptr = address; |
| *prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC; |
| return false; |
| } |
| |
| *phys_ptr = address; |
| for (n = 7; n >= 0; n--) { |
| base = env->cp15.c6_region[n]; |
| if ((base & 1) == 0) { |
| continue; |
| } |
| mask = 1 << ((base >> 1) & 0x1f); |
| /* Keep this shift separate from the above to avoid an |
| (undefined) << 32. */ |
| mask = (mask << 1) - 1; |
| if (((base ^ address) & ~mask) == 0) { |
| break; |
| } |
| } |
| if (n < 0) { |
| fi->type = ARMFault_Background; |
| return true; |
| } |
| |
| if (access_type == MMU_INST_FETCH) { |
| mask = env->cp15.pmsav5_insn_ap; |
| } else { |
| mask = env->cp15.pmsav5_data_ap; |
| } |
| mask = (mask >> (n * 4)) & 0xf; |
| switch (mask) { |
| case 0: |
| fi->type = ARMFault_Permission; |
| fi->level = 1; |
| return true; |
| case 1: |
| if (is_user) { |
| fi->type = ARMFault_Permission; |
| fi->level = 1; |
| return true; |
| } |
| *prot = PAGE_READ | PAGE_WRITE; |
| break; |
| case 2: |
| *prot = PAGE_READ; |
| if (!is_user) { |
| *prot |= PAGE_WRITE; |
| } |
| break; |
| case 3: |
| *prot = PAGE_READ | PAGE_WRITE; |
| break; |
| case 5: |
| if (is_user) { |
| fi->type = ARMFault_Permission; |
| fi->level = 1; |
| return true; |
| } |
| *prot = PAGE_READ; |
| break; |
| case 6: |
| *prot = PAGE_READ; |
| break; |
| default: |
| /* Bad permission. */ |
| fi->type = ARMFault_Permission; |
| fi->level = 1; |
| return true; |
| } |
| *prot |= PAGE_EXEC; |
| return false; |
| } |
| |
| /* Combine either inner or outer cacheability attributes for normal |
| * memory, according to table D4-42 and pseudocode procedure |
| * CombineS1S2AttrHints() of ARM DDI 0487B.b (the ARMv8 ARM). |
| * |
| * NB: only stage 1 includes allocation hints (RW bits), leading to |
| * some asymmetry. |
| */ |
| static uint8_t combine_cacheattr_nibble(uint8_t s1, uint8_t s2) |
| { |
| if (s1 == 4 || s2 == 4) { |
| /* non-cacheable has precedence */ |
| return 4; |
| } else if (extract32(s1, 2, 2) == 0 || extract32(s1, 2, 2) == 2) { |
| /* stage 1 write-through takes precedence */ |
| return s1; |
| } else if (extract32(s2, 2, 2) == 2) { |
| /* stage 2 write-through takes precedence, but the allocation hint |
| * is still taken from stage 1 |
| */ |
| return (2 << 2) | extract32(s1, 0, 2); |
| } else { /* write-back */ |
| return s1; |
| } |
| } |
| |
| /* Combine S1 and S2 cacheability/shareability attributes, per D4.5.4 |
| * and CombineS1S2Desc() |
| * |
| * @s1: Attributes from stage 1 walk |
| * @s2: Attributes from stage 2 walk |
| */ |
| static ARMCacheAttrs combine_cacheattrs(ARMCacheAttrs s1, ARMCacheAttrs s2) |
| { |
| uint8_t s1lo, s2lo, s1hi, s2hi; |
| ARMCacheAttrs ret; |
| bool tagged = false; |
| |
| if (s1.attrs == 0xf0) { |
| tagged = true; |
| s1.attrs = 0xff; |
| } |
| |
| s1lo = extract32(s1.attrs, 0, 4); |
| s2lo = extract32(s2.attrs, 0, 4); |
| s1hi = extract32(s1.attrs, 4, 4); |
| s2hi = extract32(s2.attrs, 4, 4); |
| |
| /* Combine shareability attributes (table D4-43) */ |
| if (s1.shareability == 2 || s2.shareability == 2) { |
| /* if either are outer-shareable, the result is outer-shareable */ |
| ret.shareability = 2; |
| } else if (s1.shareability == 3 || s2.shareability == 3) { |
| /* if either are inner-shareable, the result is inner-shareable */ |
| ret.shareability = 3; |
| } else { |
| /* both non-shareable */ |
| ret.shareability = 0; |
| } |
| |
| /* Combine memory type and cacheability attributes */ |
| if (s1hi == 0 || s2hi == 0) { |
| /* Device has precedence over normal */ |
| if (s1lo == 0 || s2lo == 0) { |
| /* nGnRnE has precedence over anything */ |
| ret.attrs = 0; |
| } else if (s1lo == 4 || s2lo == 4) { |
| /* non-Reordering has precedence over Reordering */ |
| ret.attrs = 4; /* nGnRE */ |
| } else if (s1lo == 8 || s2lo == 8) { |
| /* non-Gathering has precedence over Gathering */ |
| ret.attrs = 8; /* nGRE */ |
| } else { |
| ret.attrs = 0xc; /* GRE */ |
| } |
| |
| /* Any location for which the resultant memory type is any |
| * type of Device memory is always treated as Outer Shareable. |
| */ |
| ret.shareability = 2; |
| } else { /* Normal memory */ |
| /* Outer/inner cacheability combine independently */ |
| ret.attrs = combine_cacheattr_nibble(s1hi, s2hi) << 4 |
| | combine_cacheattr_nibble(s1lo, s2lo); |
| |
| if (ret.attrs == 0x44) { |
| /* Any location for which the resultant memory type is Normal |
| * Inner Non-cacheable, Outer Non-cacheable is always treated |
| * as Outer Shareable. |
| */ |
| ret.shareability = 2; |
| } |
| } |
| |
| /* TODO: CombineS1S2Desc does not consider transient, only WB, RWA. */ |
| if (tagged && ret.attrs == 0xff) { |
| ret.attrs = 0xf0; |
| } |
| |
| return ret; |
| } |
| |
| |
| /* get_phys_addr - get the physical address for this virtual address |
| * |
| * Find the physical address corresponding to the given virtual address, |
| * by doing a translation table walk on MMU based systems or using the |
| * MPU state on MPU based systems. |
| * |
| * Returns false if the translation was successful. Otherwise, phys_ptr, attrs, |
| * prot and page_size may not be filled in, and the populated fsr value provides |
| * information on why the translation aborted, in the format of a |
| * DFSR/IFSR fault register, with the following caveats: |
| * * we honour the short vs long DFSR format differences. |
| * * the WnR bit is never set (the caller must do this). |
| * * for PSMAv5 based systems we don't bother to return a full FSR format |
| * value. |
| * |
| * @env: CPUARMState |
| * @address: virtual address to get physical address for |
| * @access_type: 0 for read, 1 for write, 2 for execute |
| * @mmu_idx: MMU index indicating required translation regime |
| * @phys_ptr: set to the physical address corresponding to the virtual address |
| * @attrs: set to the memory transaction attributes to use |
| * @prot: set to the permissions for the page containing phys_ptr |
| * @page_size: set to the size of the page containing phys_ptr |
| * @fi: set to fault info if the translation fails |
| * @cacheattrs: (if non-NULL) set to the cacheability/shareability attributes |
| */ |
| bool get_phys_addr(CPUARMState *env, target_ulong address, |
| MMUAccessType access_type, ARMMMUIdx mmu_idx, |
| hwaddr *phys_ptr, MemTxAttrs *attrs, int *prot, |
| target_ulong *page_size, |
| ARMMMUFaultInfo *fi, ARMCacheAttrs *cacheattrs) |
| { |
| ARMMMUIdx s1_mmu_idx = stage_1_mmu_idx(mmu_idx); |
| |
| if (mmu_idx != s1_mmu_idx) { |
| /* Call ourselves recursively to do the stage 1 and then stage 2 |
| * translations if mmu_idx is a two-stage regime. |
| */ |
| if (arm_feature(env, ARM_FEATURE_EL2)) { |
| hwaddr ipa; |
| int s2_prot; |
| int ret; |
| ARMCacheAttrs cacheattrs2 = {}; |
| ARMMMUIdx s2_mmu_idx; |
| bool is_el0; |
| |
| ret = get_phys_addr(env, address, access_type, s1_mmu_idx, &ipa, |
| attrs, prot, page_size, fi, cacheattrs); |
| |
| /* If S1 fails or S2 is disabled, return early. */ |
| if (ret || regime_translation_disabled(env, ARMMMUIdx_Stage2)) { |
| *phys_ptr = ipa; |
| return ret; |
| } |
| |
| s2_mmu_idx = attrs->secure ? ARMMMUIdx_Stage2_S : ARMMMUIdx_Stage2; |
| is_el0 = mmu_idx == ARMMMUIdx_E10_0 || mmu_idx == ARMMMUIdx_SE10_0; |
| |
| /* S1 is done. Now do S2 translation. */ |
| ret = get_phys_addr_lpae(env, ipa, access_type, s2_mmu_idx, is_el0, |
| phys_ptr, attrs, &s2_prot, |
| page_size, fi, &cacheattrs2); |
| fi->s2addr = ipa; |
| /* Combine the S1 and S2 perms. */ |
| *prot &= s2_prot; |
| |
| /* If S2 fails, return early. */ |
| if (ret) { |
| return ret; |
| } |
| |
| /* Combine the S1 and S2 cache attributes. */ |
| if (arm_hcr_el2_eff(env) & HCR_DC) { |
| /* |
| * HCR.DC forces the first stage attributes to |
| * Normal Non-Shareable, |
| * Inner Write-Back Read-Allocate Write-Allocate, |
| * Outer Write-Back Read-Allocate Write-Allocate. |
| * Do not overwrite Tagged within attrs. |
| */ |
| if (cacheattrs->attrs != 0xf0) { |
| cacheattrs->attrs = 0xff; |
| } |
| cacheattrs->shareability = 0; |
| } |
| *cacheattrs = combine_cacheattrs(*cacheattrs, cacheattrs2); |
| |
| /* Check if IPA translates to secure or non-secure PA space. */ |
| if (arm_is_secure_below_el3(env)) { |
| if (attrs->secure) { |
| attrs->secure = |
| !(env->cp15.vstcr_el2.raw_tcr & (VSTCR_SA | VSTCR_SW)); |
| } else { |
| attrs->secure = |
| !((env->cp15.vtcr_el2.raw_tcr & (VTCR_NSA | VTCR_NSW)) |
| || (env->cp15.vstcr_el2.raw_tcr & VSTCR_SA)); |
| } |
| } |
| return 0; |
| } else { |
| /* |
| * For non-EL2 CPUs a stage1+stage2 translation is just stage 1. |
| */ |
| mmu_idx = stage_1_mmu_idx(mmu_idx); |
| } |
| } |
| |
| /* The page table entries may downgrade secure to non-secure, but |
| * cannot upgrade an non-secure translation regime's attributes |
| * to secure. |
| */ |
| attrs->secure = regime_is_secure(env, mmu_idx); |
| attrs->user = regime_is_user(env, mmu_idx); |
| |
| /* Fast Context Switch Extension. This doesn't exist at all in v8. |
| * In v7 and earlier it affects all stage 1 translations. |
| */ |
| if (address < 0x02000000 && mmu_idx != ARMMMUIdx_Stage2 |
| && !arm_feature(env, ARM_FEATURE_V8)) { |
| if (regime_el(env, mmu_idx) == 3) { |
| address += env->cp15.fcseidr_s; |
| } else { |
| address += env->cp15.fcseidr_ns; |
| } |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_PMSA)) { |
| bool ret; |
| *page_size = TARGET_PAGE_SIZE; |
| |
| if (arm_feature(env, ARM_FEATURE_V8)) { |
| /* PMSAv8 */ |
| ret = get_phys_addr_pmsav8(env, address, access_type, mmu_idx, |
| phys_ptr, attrs, prot, page_size, fi); |
| } else if (arm_feature(env, ARM_FEATURE_V7)) { |
| /* PMSAv7 */ |
| ret = get_phys_addr_pmsav7(env, address, access_type, mmu_idx, |
| phys_ptr, prot, page_size, fi); |
| } else { |
| /* Pre-v7 MPU */ |
| ret = get_phys_addr_pmsav5(env, address, access_type, mmu_idx, |
| phys_ptr, prot, fi); |
| } |
| qemu_log_mask(CPU_LOG_MMU, "PMSA MPU lookup for %s at 0x%08" PRIx32 |
| " mmu_idx %u -> %s (prot %c%c%c)\n", |
| access_type == MMU_DATA_LOAD ? "reading" : |
| (access_type == MMU_DATA_STORE ? "writing" : "execute"), |
| (uint32_t)address, mmu_idx, |
| ret ? "Miss" : "Hit", |
| *prot & PAGE_READ ? 'r' : '-', |
| *prot & PAGE_WRITE ? 'w' : '-', |
| *prot & PAGE_EXEC ? 'x' : '-'); |
| |
| return ret; |
| } |
| |
| /* Definitely a real MMU, not an MPU */ |
| |
| if (regime_translation_disabled(env, mmu_idx)) { |
| uint64_t hcr; |
| uint8_t memattr; |
| |
| /* |
| * MMU disabled. S1 addresses within aa64 translation regimes are |
| * still checked for bounds -- see AArch64.TranslateAddressS1Off. |
| */ |
| if (mmu_idx != ARMMMUIdx_Stage2 && mmu_idx != ARMMMUIdx_Stage2_S) { |
| int r_el = regime_el(env, mmu_idx); |
| if (arm_el_is_aa64(env, r_el)) { |
| int pamax = arm_pamax(env_archcpu(env)); |
| uint64_t tcr = env->cp15.tcr_el[r_el].raw_tcr; |
| int addrtop, tbi; |
| |
| tbi = aa64_va_parameter_tbi(tcr, mmu_idx); |
| if (access_type == MMU_INST_FETCH) { |
| tbi &= ~aa64_va_parameter_tbid(tcr, mmu_idx); |
| } |
| tbi = (tbi >> extract64(address, 55, 1)) & 1; |
| addrtop = (tbi ? 55 : 63); |
| |
| if (extract64(address, pamax, addrtop - pamax + 1) != 0) { |
| fi->type = ARMFault_AddressSize; |
| fi->level = 0; |
| fi->stage2 = false; |
| return 1; |
| } |
| |
| /* |
| * When TBI is disabled, we've just validated that all of the |
| * bits above PAMax are zero, so logically we only need to |
| * clear the top byte for TBI. But it's clearer to follow |
| * the pseudocode set of addrdesc.paddress. |
| */ |
| address = extract64(address, 0, 52); |
| } |
| } |
| *phys_ptr = address; |
| *prot = PAGE_READ | PAGE_WRITE | PAGE_EXEC; |
| *page_size = TARGET_PAGE_SIZE; |
| |
| /* Fill in cacheattr a-la AArch64.TranslateAddressS1Off. */ |
| hcr = arm_hcr_el2_eff(env); |
| cacheattrs->shareability = 0; |
| if (hcr & HCR_DC) { |
| if (hcr & HCR_DCT) { |
| memattr = 0xf0; /* Tagged, Normal, WB, RWA */ |
| } else { |
| memattr = 0xff; /* Normal, WB, RWA */ |
| } |
| } else if (access_type == MMU_INST_FETCH) { |
| if (regime_sctlr(env, mmu_idx) & SCTLR_I) { |
| memattr = 0xee; /* Normal, WT, RA, NT */ |
| } else { |
| memattr = 0x44; /* Normal, NC, No */ |
| } |
| cacheattrs->shareability = 2; /* outer sharable */ |
| } else { |
| memattr = 0x00; /* Device, nGnRnE */ |
| } |
| cacheattrs->attrs = memattr; |
| return 0; |
| } |
| |
| if (regime_using_lpae_format(env, mmu_idx)) { |
| return get_phys_addr_lpae(env, address, access_type, mmu_idx, false, |
| phys_ptr, attrs, prot, page_size, |
| fi, cacheattrs); |
| } else if (regime_sctlr(env, mmu_idx) & SCTLR_XP) { |
| return get_phys_addr_v6(env, address, access_type, mmu_idx, |
| phys_ptr, attrs, prot, page_size, fi); |
| } else { |
| return get_phys_addr_v5(env, address, access_type, mmu_idx, |
| phys_ptr, prot, page_size, fi); |
| } |
| } |
| |
| hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr, |
| MemTxAttrs *attrs) |
| { |
| ARMCPU *cpu = ARM_CPU(cs); |
| CPUARMState *env = &cpu->env; |
| hwaddr phys_addr; |
| target_ulong page_size; |
| int prot; |
| bool ret; |
| ARMMMUFaultInfo fi = {}; |
| ARMMMUIdx mmu_idx = arm_mmu_idx(env); |
| ARMCacheAttrs cacheattrs = {}; |
| |
| *attrs = (MemTxAttrs) {}; |
| |
| ret = get_phys_addr(env, addr, MMU_DATA_LOAD, mmu_idx, &phys_addr, |
| attrs, &prot, &page_size, &fi, &cacheattrs); |
| |
| if (ret) { |
| return -1; |
| } |
| return phys_addr; |
| } |
| |
| #endif |
| |
| /* Note that signed overflow is undefined in C. The following routines are |
| careful to use unsigned types where modulo arithmetic is required. |
| Failure to do so _will_ break on newer gcc. */ |
| |
| /* Signed saturating arithmetic. */ |
| |
| /* Perform 16-bit signed saturating addition. */ |
| static inline uint16_t add16_sat(uint16_t a, uint16_t b) |
| { |
| uint16_t res; |
| |
| res = a + b; |
| if (((res ^ a) & 0x8000) && !((a ^ b) & 0x8000)) { |
| if (a & 0x8000) |
| res = 0x8000; |
| else |
| res = 0x7fff; |
| } |
| return res; |
| } |
| |
| /* Perform 8-bit signed saturating addition. */ |
| static inline uint8_t add8_sat(uint8_t a, uint8_t b) |
| { |
| uint8_t res; |
| |
| res = a + b; |
| if (((res ^ a) & 0x80) && !((a ^ b) & 0x80)) { |
| if (a & 0x80) |
| res = 0x80; |
| else |
| res = 0x7f; |
| } |
| return res; |
| } |
| |
| /* Perform 16-bit signed saturating subtraction. */ |
| static inline uint16_t sub16_sat(uint16_t a, uint16_t b) |
| { |
| uint16_t res; |
| |
| res = a - b; |
| if (((res ^ a) & 0x8000) && ((a ^ b) & 0x8000)) { |
| if (a & 0x8000) |
| res = 0x8000; |
| else |
| res = 0x7fff; |
| } |
| return res; |
| } |
| |
| /* Perform 8-bit signed saturating subtraction. */ |
| static inline uint8_t sub8_sat(uint8_t a, uint8_t b) |
| { |
| uint8_t res; |
| |
| res = a - b; |
| if (((res ^ a) & 0x80) && ((a ^ b) & 0x80)) { |
| if (a & 0x80) |
| res = 0x80; |
| else |
| res = 0x7f; |
| } |
| return res; |
| } |
| |
| #define ADD16(a, b, n) RESULT(add16_sat(a, b), n, 16); |
| #define SUB16(a, b, n) RESULT(sub16_sat(a, b), n, 16); |
| #define ADD8(a, b, n) RESULT(add8_sat(a, b), n, 8); |
| #define SUB8(a, b, n) RESULT(sub8_sat(a, b), n, 8); |
| #define PFX q |
| |
| #include "op_addsub.h" |
| |
| /* Unsigned saturating arithmetic. */ |
| static inline uint16_t add16_usat(uint16_t a, uint16_t b) |
| { |
| uint16_t res; |
| res = a + b; |
| if (res < a) |
| res = 0xffff; |
| return res; |
| } |
| |
| static inline uint16_t sub16_usat(uint16_t a, uint16_t b) |
| { |
| if (a > b) |
| return a - b; |
| else |
| return 0; |
| } |
| |
| static inline uint8_t add8_usat(uint8_t a, uint8_t b) |
| { |
| uint8_t res; |
| res = a + b; |
| if (res < a) |
| res = 0xff; |
| return res; |
| } |
| |
| static inline uint8_t sub8_usat(uint8_t a, uint8_t b) |
| { |
| if (a > b) |
| return a - b; |
| else |
| return 0; |
| } |
| |
| #define ADD16(a, b, n) RESULT(add16_usat(a, b), n, 16); |
| #define SUB16(a, b, n) RESULT(sub16_usat(a, b), n, 16); |
| #define ADD8(a, b, n) RESULT(add8_usat(a, b), n, 8); |
| #define SUB8(a, b, n) RESULT(sub8_usat(a, b), n, 8); |
| #define PFX uq |
| |
| #include "op_addsub.h" |
| |
| /* Signed modulo arithmetic. */ |
| #define SARITH16(a, b, n, op) do { \ |
| int32_t sum; \ |
| sum = (int32_t)(int16_t)(a) op (int32_t)(int16_t)(b); \ |
| RESULT(sum, n, 16); \ |
| if (sum >= 0) \ |
| ge |= 3 << (n * 2); \ |
| } while(0) |
| |
| #define SARITH8(a, b, n, op) do { \ |
| int32_t sum; \ |
| sum = (int32_t)(int8_t)(a) op (int32_t)(int8_t)(b); \ |
| RESULT(sum, n, 8); \ |
| if (sum >= 0) \ |
| ge |= 1 << n; \ |
| } while(0) |
| |
| |
| #define ADD16(a, b, n) SARITH16(a, b, n, +) |
| #define SUB16(a, b, n) SARITH16(a, b, n, -) |
| #define ADD8(a, b, n) SARITH8(a, b, n, +) |
| #define SUB8(a, b, n) SARITH8(a, b, n, -) |
| #define PFX s |
| #define ARITH_GE |
| |
| #include "op_addsub.h" |
| |
| /* Unsigned modulo arithmetic. */ |
| #define ADD16(a, b, n) do { \ |
| uint32_t sum; \ |
| sum = (uint32_t)(uint16_t)(a) + (uint32_t)(uint16_t)(b); \ |
| RESULT(sum, n, 16); \ |
| if ((sum >> 16) == 1) \ |
| ge |= 3 << (n * 2); \ |
| } while(0) |
| |
| #define ADD8(a, b, n) do { \ |
| uint32_t sum; \ |
| sum = (uint32_t)(uint8_t)(a) + (uint32_t)(uint8_t)(b); \ |
| RESULT(sum, n, 8); \ |
| if ((sum >> 8) == 1) \ |
| ge |= 1 << n; \ |
| } while(0) |
| |
| #define SUB16(a, b, n) do { \ |
| uint32_t sum; \ |
| sum = (uint32_t)(uint16_t)(a) - (uint32_t)(uint16_t)(b); \ |
| RESULT(sum, n, 16); \ |
| if ((sum >> 16) == 0) \ |
| ge |= 3 << (n * 2); \ |
| } while(0) |
| |
| #define SUB8(a, b, n) do { \ |
| uint32_t sum; \ |
| sum = (uint32_t)(uint8_t)(a) - (uint32_t)(uint8_t)(b); \ |
| RESULT(sum, n, 8); \ |
| if ((sum >> 8) == 0) \ |
| ge |= 1 << n; \ |
| } while(0) |
| |
| #define PFX u |
| #define ARITH_GE |
| |
| #include "op_addsub.h" |
| |
| /* Halved signed arithmetic. */ |
| #define ADD16(a, b, n) \ |
| RESULT(((int32_t)(int16_t)(a) + (int32_t)(int16_t)(b)) >> 1, n, 16) |
| #define SUB16(a, b, n) \ |
| RESULT(((int32_t)(int16_t)(a) - (int32_t)(int16_t)(b)) >> 1, n, 16) |
| #define ADD8(a, b, n) \ |
| RESULT(((int32_t)(int8_t)(a) + (int32_t)(int8_t)(b)) >> 1, n, 8) |
| #define SUB8(a, b, n) \ |
| RESULT(((int32_t)(int8_t)(a) - (int32_t)(int8_t)(b)) >> 1, n, 8) |
| #define PFX sh |
| |
| #include "op_addsub.h" |
| |
| /* Halved unsigned arithmetic. */ |
| #define ADD16(a, b, n) \ |
| RESULT(((uint32_t)(uint16_t)(a) + (uint32_t)(uint16_t)(b)) >> 1, n, 16) |
| #define SUB16(a, b, n) \ |
| RESULT(((uint32_t)(uint16_t)(a) - (uint32_t)(uint16_t)(b)) >> 1, n, 16) |
| #define ADD8(a, b, n) \ |
| RESULT(((uint32_t)(uint8_t)(a) + (uint32_t)(uint8_t)(b)) >> 1, n, 8) |
| #define SUB8(a, b, n) \ |
| RESULT(((uint32_t)(uint8_t)(a) - (uint32_t)(uint8_t)(b)) >> 1, n, 8) |
| #define PFX uh |
| |
| #include "op_addsub.h" |
| |
| static inline uint8_t do_usad(uint8_t a, uint8_t b) |
| { |
| if (a > b) |
| return a - b; |
| else |
| return b - a; |
| } |
| |
| /* Unsigned sum of absolute byte differences. */ |
| uint32_t HELPER(usad8)(uint32_t a, uint32_t b) |
| { |
| uint32_t sum; |
| sum = do_usad(a, b); |
| sum += do_usad(a >> 8, b >> 8); |
| sum += do_usad(a >> 16, b >> 16); |
| sum += do_usad(a >> 24, b >> 24); |
| return sum; |
| } |
| |
| /* For ARMv6 SEL instruction. */ |
| uint32_t HELPER(sel_flags)(uint32_t flags, uint32_t a, uint32_t b) |
| { |
| uint32_t mask; |
| |
| mask = 0; |
| if (flags & 1) |
| mask |= 0xff; |
| if (flags & 2) |
| mask |= 0xff00; |
| if (flags & 4) |
| mask |= 0xff0000; |
| if (flags & 8) |
| mask |= 0xff000000; |
| return (a & mask) | (b & ~mask); |
| } |
| |
| /* CRC helpers. |
| * The upper bytes of val (above the number specified by 'bytes') must have |
| * been zeroed out by the caller. |
| */ |
| uint32_t HELPER(crc32)(uint32_t acc, uint32_t val, uint32_t bytes) |
| { |
| uint8_t buf[4]; |
| |
| stl_le_p(buf, val); |
| |
| /* zlib crc32 converts the accumulator and output to one's complement. */ |
| return crc32(acc ^ 0xffffffff, buf, bytes) ^ 0xffffffff; |
| } |
| |
| uint32_t HELPER(crc32c)(uint32_t acc, uint32_t val, uint32_t bytes) |
| { |
| uint8_t buf[4]; |
| |
| stl_le_p(buf, val); |
| |
| /* Linux crc32c converts the output to one's complement. */ |
| return crc32c(acc, buf, bytes) ^ 0xffffffff; |
| } |
| |
| /* Return the exception level to which FP-disabled exceptions should |
| * be taken, or 0 if FP is enabled. |
| */ |
| int fp_exception_el(CPUARMState *env, int cur_el) |
| { |
| #ifndef CONFIG_USER_ONLY |
| uint64_t hcr_el2; |
| |
| /* CPACR and the CPTR registers don't exist before v6, so FP is |
| * always accessible |
| */ |
| if (!arm_feature(env, ARM_FEATURE_V6)) { |
| return 0; |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_M)) { |
| /* CPACR can cause a NOCP UsageFault taken to current security state */ |
| if (!v7m_cpacr_pass(env, env->v7m.secure, cur_el != 0)) { |
| return 1; |
| } |
| |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY) && !env->v7m.secure) { |
| if (!extract32(env->v7m.nsacr, 10, 1)) { |
| /* FP insns cause a NOCP UsageFault taken to Secure */ |
| return 3; |
| } |
| } |
| |
| return 0; |
| } |
| |
| hcr_el2 = arm_hcr_el2_eff(env); |
| |
| /* The CPACR controls traps to EL1, or PL1 if we're 32 bit: |
| * 0, 2 : trap EL0 and EL1/PL1 accesses |
| * 1 : trap only EL0 accesses |
| * 3 : trap no accesses |
| * This register is ignored if E2H+TGE are both set. |
| */ |
| if ((hcr_el2 & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) { |
| int fpen = extract32(env->cp15.cpacr_el1, 20, 2); |
| |
| switch (fpen) { |
| case 0: |
| case 2: |
| if (cur_el == 0 || cur_el == 1) { |
| /* Trap to PL1, which might be EL1 or EL3 */ |
| if (arm_is_secure(env) && !arm_el_is_aa64(env, 3)) { |
| return 3; |
| } |
| return 1; |
| } |
| if (cur_el == 3 && !is_a64(env)) { |
| /* Secure PL1 running at EL3 */ |
| return 3; |
| } |
| break; |
| case 1: |
| if (cur_el == 0) { |
| return 1; |
| } |
| break; |
| case 3: |
| break; |
| } |
| } |
| |
| /* |
| * The NSACR allows A-profile AArch32 EL3 and M-profile secure mode |
| * to control non-secure access to the FPU. It doesn't have any |
| * effect if EL3 is AArch64 or if EL3 doesn't exist at all. |
| */ |
| if ((arm_feature(env, ARM_FEATURE_EL3) && !arm_el_is_aa64(env, 3) && |
| cur_el <= 2 && !arm_is_secure_below_el3(env))) { |
| if (!extract32(env->cp15.nsacr, 10, 1)) { |
| /* FP insns act as UNDEF */ |
| return cur_el == 2 ? 2 : 1; |
| } |
| } |
| |
| /* |
| * CPTR_EL2 is present in v7VE or v8, and changes format |
| * with HCR_EL2.E2H (regardless of TGE). |
| */ |
| if (cur_el <= 2) { |
| if (hcr_el2 & HCR_E2H) { |
| /* Check CPTR_EL2.FPEN. */ |
| switch (extract32(env->cp15.cptr_el[2], 20, 2)) { |
| case 1: |
| if (cur_el != 0 || !(hcr_el2 & HCR_TGE)) { |
| break; |
| } |
| /* fall through */ |
| case 0: |
| case 2: |
| return 2; |
| } |
| } else if (arm_is_el2_enabled(env)) { |
| if (env->cp15.cptr_el[2] & CPTR_TFP) { |
| return 2; |
| } |
| } |
| } |
| |
| /* CPTR_EL3 : present in v8 */ |
| if (env->cp15.cptr_el[3] & CPTR_TFP) { |
| /* Trap all FP ops to EL3 */ |
| return 3; |
| } |
| #endif |
| return 0; |
| } |
| |
| /* Return the exception level we're running at if this is our mmu_idx */ |
| int arm_mmu_idx_to_el(ARMMMUIdx mmu_idx) |
| { |
| if (mmu_idx & ARM_MMU_IDX_M) { |
| return mmu_idx & ARM_MMU_IDX_M_PRIV; |
| } |
| |
| switch (mmu_idx) { |
| case ARMMMUIdx_E10_0: |
| case ARMMMUIdx_E20_0: |
| case ARMMMUIdx_SE10_0: |
| case ARMMMUIdx_SE20_0: |
| return 0; |
| case ARMMMUIdx_E10_1: |
| case ARMMMUIdx_E10_1_PAN: |
| case ARMMMUIdx_SE10_1: |
| case ARMMMUIdx_SE10_1_PAN: |
| return 1; |
| case ARMMMUIdx_E2: |
| case ARMMMUIdx_E20_2: |
| case ARMMMUIdx_E20_2_PAN: |
| case ARMMMUIdx_SE2: |
| case ARMMMUIdx_SE20_2: |
| case ARMMMUIdx_SE20_2_PAN: |
| return 2; |
| case ARMMMUIdx_SE3: |
| return 3; |
| default: |
| g_assert_not_reached(); |
| } |
| } |
| |
| #ifndef CONFIG_TCG |
| ARMMMUIdx arm_v7m_mmu_idx_for_secstate(CPUARMState *env, bool secstate) |
| { |
| g_assert_not_reached(); |
| } |
| #endif |
| |
| ARMMMUIdx arm_mmu_idx_el(CPUARMState *env, int el) |
| { |
| ARMMMUIdx idx; |
| uint64_t hcr; |
| |
| if (arm_feature(env, ARM_FEATURE_M)) { |
| return arm_v7m_mmu_idx_for_secstate(env, env->v7m.secure); |
| } |
| |
| /* See ARM pseudo-function ELIsInHost. */ |
| switch (el) { |
| case 0: |
| hcr = arm_hcr_el2_eff(env); |
| if ((hcr & (HCR_E2H | HCR_TGE)) == (HCR_E2H | HCR_TGE)) { |
| idx = ARMMMUIdx_E20_0; |
| } else { |
| idx = ARMMMUIdx_E10_0; |
| } |
| break; |
| case 1: |
| if (env->pstate & PSTATE_PAN) { |
| idx = ARMMMUIdx_E10_1_PAN; |
| } else { |
| idx = ARMMMUIdx_E10_1; |
| } |
| break; |
| case 2: |
| /* Note that TGE does not apply at EL2. */ |
| if (arm_hcr_el2_eff(env) & HCR_E2H) { |
| if (env->pstate & PSTATE_PAN) { |
| idx = ARMMMUIdx_E20_2_PAN; |
| } else { |
| idx = ARMMMUIdx_E20_2; |
| } |
| } else { |
| idx = ARMMMUIdx_E2; |
| } |
| break; |
| case 3: |
| return ARMMMUIdx_SE3; |
| default: |
| g_assert_not_reached(); |
| } |
| |
| if (arm_is_secure_below_el3(env)) { |
| idx &= ~ARM_MMU_IDX_A_NS; |
| } |
| |
| return idx; |
| } |
| |
| ARMMMUIdx arm_mmu_idx(CPUARMState *env) |
| { |
| return arm_mmu_idx_el(env, arm_current_el(env)); |
| } |
| |
| #ifndef CONFIG_USER_ONLY |
| ARMMMUIdx arm_stage1_mmu_idx(CPUARMState *env) |
| { |
| return stage_1_mmu_idx(arm_mmu_idx(env)); |
| } |
| #endif |
| |
| static CPUARMTBFlags rebuild_hflags_common(CPUARMState *env, int fp_el, |
| ARMMMUIdx mmu_idx, |
| CPUARMTBFlags flags) |
| { |
| DP_TBFLAG_ANY(flags, FPEXC_EL, fp_el); |
| DP_TBFLAG_ANY(flags, MMUIDX, arm_to_core_mmu_idx(mmu_idx)); |
| |
| if (arm_singlestep_active(env)) { |
| DP_TBFLAG_ANY(flags, SS_ACTIVE, 1); |
| } |
| return flags; |
| } |
| |
| static CPUARMTBFlags rebuild_hflags_common_32(CPUARMState *env, int fp_el, |
| ARMMMUIdx mmu_idx, |
| CPUARMTBFlags flags) |
| { |
| bool sctlr_b = arm_sctlr_b(env); |
| |
| if (sctlr_b) { |
| DP_TBFLAG_A32(flags, SCTLR__B, 1); |
| } |
| if (arm_cpu_data_is_big_endian_a32(env, sctlr_b)) { |
| DP_TBFLAG_ANY(flags, BE_DATA, 1); |
| } |
| DP_TBFLAG_A32(flags, NS, !access_secure_reg(env)); |
| |
| return rebuild_hflags_common(env, fp_el, mmu_idx, flags); |
| } |
| |
| static CPUARMTBFlags rebuild_hflags_m32(CPUARMState *env, int fp_el, |
| ARMMMUIdx mmu_idx) |
| { |
| CPUARMTBFlags flags = {}; |
| uint32_t ccr = env->v7m.ccr[env->v7m.secure]; |
| |
| /* Without HaveMainExt, CCR.UNALIGN_TRP is RES1. */ |
| if (ccr & R_V7M_CCR_UNALIGN_TRP_MASK) { |
| DP_TBFLAG_ANY(flags, ALIGN_MEM, 1); |
| } |
| |
| if (arm_v7m_is_handler_mode(env)) { |
| DP_TBFLAG_M32(flags, HANDLER, 1); |
| } |
| |
| /* |
| * v8M always applies stack limit checks unless CCR.STKOFHFNMIGN |
| * is suppressing them because the requested execution priority |
| * is less than 0. |
| */ |
| if (arm_feature(env, ARM_FEATURE_V8) && |
| !((mmu_idx & ARM_MMU_IDX_M_NEGPRI) && |
| (ccr & R_V7M_CCR_STKOFHFNMIGN_MASK))) { |
| DP_TBFLAG_M32(flags, STACKCHECK, 1); |
| } |
| |
| return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); |
| } |
| |
| static CPUARMTBFlags rebuild_hflags_aprofile(CPUARMState *env) |
| { |
| CPUARMTBFlags flags = {}; |
| |
| DP_TBFLAG_ANY(flags, DEBUG_TARGET_EL, arm_debug_target_el(env)); |
| return flags; |
| } |
| |
| static CPUARMTBFlags rebuild_hflags_a32(CPUARMState *env, int fp_el, |
| ARMMMUIdx mmu_idx) |
| { |
| CPUARMTBFlags flags = rebuild_hflags_aprofile(env); |
| int el = arm_current_el(env); |
| |
| if (arm_sctlr(env, el) & SCTLR_A) { |
| DP_TBFLAG_ANY(flags, ALIGN_MEM, 1); |
| } |
| |
| if (arm_el_is_aa64(env, 1)) { |
| DP_TBFLAG_A32(flags, VFPEN, 1); |
| } |
| |
| if (el < 2 && env->cp15.hstr_el2 && |
| (arm_hcr_el2_eff(env) & (HCR_E2H | HCR_TGE)) != (HCR_E2H | HCR_TGE)) { |
| DP_TBFLAG_A32(flags, HSTR_ACTIVE, 1); |
| } |
| |
| if (env->uncached_cpsr & CPSR_IL) { |
| DP_TBFLAG_ANY(flags, PSTATE__IL, 1); |
| } |
| |
| return rebuild_hflags_common_32(env, fp_el, mmu_idx, flags); |
| } |
| |
| static CPUARMTBFlags rebuild_hflags_a64(CPUARMState *env, int el, int fp_el, |
| ARMMMUIdx mmu_idx) |
| { |
| CPUARMTBFlags flags = rebuild_hflags_aprofile(env); |
| ARMMMUIdx stage1 = stage_1_mmu_idx(mmu_idx); |
| uint64_t tcr = regime_tcr(env, mmu_idx)->raw_tcr; |
| uint64_t sctlr; |
| int tbii, tbid; |
| |
| DP_TBFLAG_ANY(flags, AARCH64_STATE, 1); |
| |
| /* Get control bits for tagged addresses. */ |
| tbid = aa64_va_parameter_tbi(tcr, mmu_idx); |
| tbii = tbid & ~aa64_va_parameter_tbid(tcr, mmu_idx); |
| |
| DP_TBFLAG_A64(flags, TBII, tbii); |
| DP_TBFLAG_A64(flags, TBID, tbid); |
| |
| if (cpu_isar_feature(aa64_sve, env_archcpu(env))) { |
| int sve_el = sve_exception_el(env, el); |
| uint32_t zcr_len; |
| |
| /* |
| * If SVE is disabled, but FP is enabled, |
| * then the effective len is 0. |
| */ |
| if (sve_el != 0 && fp_el == 0) { |
| zcr_len = 0; |
| } else { |
| zcr_len = sve_zcr_len_for_el(env, el); |
| } |
| DP_TBFLAG_A64(flags, SVEEXC_EL, sve_el); |
| DP_TBFLAG_A64(flags, ZCR_LEN, zcr_len); |
| } |
| |
| sctlr = regime_sctlr(env, stage1); |
| |
| if (sctlr & SCTLR_A) { |
| DP_TBFLAG_ANY(flags, ALIGN_MEM, 1); |
| } |
| |
| if (arm_cpu_data_is_big_endian_a64(el, sctlr)) { |
| DP_TBFLAG_ANY(flags, BE_DATA, 1); |
| } |
| |
| if (cpu_isar_feature(aa64_pauth, env_archcpu(env))) { |
| /* |
| * In order to save space in flags, we record only whether |
| * pauth is "inactive", meaning all insns are implemented as |
| * a nop, or "active" when some action must be performed. |
| * The decision of which action to take is left to a helper. |
| */ |
| if (sctlr & (SCTLR_EnIA | SCTLR_EnIB | SCTLR_EnDA | SCTLR_EnDB)) { |
| DP_TBFLAG_A64(flags, PAUTH_ACTIVE, 1); |
| } |
| } |
| |
| if (cpu_isar_feature(aa64_bti, env_archcpu(env))) { |
| /* Note that SCTLR_EL[23].BT == SCTLR_BT1. */ |
| if (sctlr & (el == 0 ? SCTLR_BT0 : SCTLR_BT1)) { |
| DP_TBFLAG_A64(flags, BT, 1); |
| } |
| } |
| |
| /* Compute the condition for using AccType_UNPRIV for LDTR et al. */ |
| if (!(env->pstate & PSTATE_UAO)) { |
| switch (mmu_idx) { |
| case ARMMMUIdx_E10_1: |
| case ARMMMUIdx_E10_1_PAN: |
| case ARMMMUIdx_SE10_1: |
| case ARMMMUIdx_SE10_1_PAN: |
| /* TODO: ARMv8.3-NV */ |
| DP_TBFLAG_A64(flags, UNPRIV, 1); |
| break; |
| case ARMMMUIdx_E20_2: |
| case ARMMMUIdx_E20_2_PAN: |
| case ARMMMUIdx_SE20_2: |
| case ARMMMUIdx_SE20_2_PAN: |
| /* |
| * Note that EL20_2 is gated by HCR_EL2.E2H == 1, but EL20_0 is |
| * gated by HCR_EL2.<E2H,TGE> == '11', and so is LDTR. |
| */ |
| if (env->cp15.hcr_el2 & HCR_TGE) { |
| DP_TBFLAG_A64(flags, UNPRIV, 1); |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| |
| if (env->pstate & PSTATE_IL) { |
| DP_TBFLAG_ANY(flags, PSTATE__IL, 1); |
| } |
| |
| if (cpu_isar_feature(aa64_mte, env_archcpu(env))) { |
| /* |
| * Set MTE_ACTIVE if any access may be Checked, and leave clear |
| * if all accesses must be Unchecked: |
| * 1) If no TBI, then there are no tags in the address to check, |
| * 2) If Tag Check Override, then all accesses are Unchecked, |
| * 3) If Tag Check Fail == 0, then Checked access have no effect, |
| * 4) If no Allocation Tag Access, then all accesses are Unchecked. |
| */ |
| if (allocation_tag_access_enabled(env, el, sctlr)) { |
| DP_TBFLAG_A64(flags, ATA, 1); |
| if (tbid |
| && !(env->pstate & PSTATE_TCO) |
| && (sctlr & (el == 0 ? SCTLR_TCF0 : SCTLR_TCF))) { |
| DP_TBFLAG_A64(flags, MTE_ACTIVE, 1); |
| } |
| } |
| /* And again for unprivileged accesses, if required. */ |
| if (EX_TBFLAG_A64(flags, UNPRIV) |
| && tbid |
| && !(env->pstate & PSTATE_TCO) |
| && (sctlr & SCTLR_TCF0) |
| && allocation_tag_access_enabled(env, 0, sctlr)) { |
| DP_TBFLAG_A64(flags, MTE0_ACTIVE, 1); |
| } |
| /* Cache TCMA as well as TBI. */ |
| DP_TBFLAG_A64(flags, TCMA, aa64_va_parameter_tcma(tcr, mmu_idx)); |
| } |
| |
| return rebuild_hflags_common(env, fp_el, mmu_idx, flags); |
| } |
| |
| static CPUARMTBFlags rebuild_hflags_internal(CPUARMState *env) |
| { |
| int el = arm_current_el(env); |
| int fp_el = fp_exception_el(env, el); |
| ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); |
| |
| if (is_a64(env)) { |
| return rebuild_hflags_a64(env, el, fp_el, mmu_idx); |
| } else if (arm_feature(env, ARM_FEATURE_M)) { |
| return rebuild_hflags_m32(env, fp_el, mmu_idx); |
| } else { |
| return rebuild_hflags_a32(env, fp_el, mmu_idx); |
| } |
| } |
| |
| void arm_rebuild_hflags(CPUARMState *env) |
| { |
| env->hflags = rebuild_hflags_internal(env); |
| } |
| |
| /* |
| * If we have triggered a EL state change we can't rely on the |
| * translator having passed it to us, we need to recompute. |
| */ |
| void HELPER(rebuild_hflags_m32_newel)(CPUARMState *env) |
| { |
| int el = arm_current_el(env); |
| int fp_el = fp_exception_el(env, el); |
| ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); |
| |
| env->hflags = rebuild_hflags_m32(env, fp_el, mmu_idx); |
| } |
| |
| void HELPER(rebuild_hflags_m32)(CPUARMState *env, int el) |
| { |
| int fp_el = fp_exception_el(env, el); |
| ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); |
| |
| env->hflags = rebuild_hflags_m32(env, fp_el, mmu_idx); |
| } |
| |
| /* |
| * If we have triggered a EL state change we can't rely on the |
| * translator having passed it to us, we need to recompute. |
| */ |
| void HELPER(rebuild_hflags_a32_newel)(CPUARMState *env) |
| { |
| int el = arm_current_el(env); |
| int fp_el = fp_exception_el(env, el); |
| ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); |
| env->hflags = rebuild_hflags_a32(env, fp_el, mmu_idx); |
| } |
| |
| void HELPER(rebuild_hflags_a32)(CPUARMState *env, int el) |
| { |
| int fp_el = fp_exception_el(env, el); |
| ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); |
| |
| env->hflags = rebuild_hflags_a32(env, fp_el, mmu_idx); |
| } |
| |
| void HELPER(rebuild_hflags_a64)(CPUARMState *env, int el) |
| { |
| int fp_el = fp_exception_el(env, el); |
| ARMMMUIdx mmu_idx = arm_mmu_idx_el(env, el); |
| |
| env->hflags = rebuild_hflags_a64(env, el, fp_el, mmu_idx); |
| } |
| |
| static inline void assert_hflags_rebuild_correctly(CPUARMState *env) |
| { |
| #ifdef CONFIG_DEBUG_TCG |
| CPUARMTBFlags c = env->hflags; |
| CPUARMTBFlags r = rebuild_hflags_internal(env); |
| |
| if (unlikely(c.flags != r.flags || c.flags2 != r.flags2)) { |
| fprintf(stderr, "TCG hflags mismatch " |
| "(current:(0x%08x,0x" TARGET_FMT_lx ")" |
| " rebuilt:(0x%08x,0x" TARGET_FMT_lx ")\n", |
| c.flags, c.flags2, r.flags, r.flags2); |
| abort(); |
| } |
| #endif |
| } |
| |
| static bool mve_no_pred(CPUARMState *env) |
| { |
| /* |
| * Return true if there is definitely no predication of MVE |
| * instructions by VPR or LTPSIZE. (Returning false even if there |
| * isn't any predication is OK; generated code will just be |
| * a little worse.) |
| * If the CPU does not implement MVE then this TB flag is always 0. |
| * |
| * NOTE: if you change this logic, the "recalculate s->mve_no_pred" |
| * logic in gen_update_fp_context() needs to be updated to match. |
| * |
| * We do not include the effect of the ECI bits here -- they are |
| * tracked in other TB flags. This simplifies the logic for |
| * "when did we emit code that changes the MVE_NO_PRED TB flag |
| * and thus need to end the TB?". |
| */ |
| if (cpu_isar_feature(aa32_mve, env_archcpu(env))) { |
| return false; |
| } |
| if (env->v7m.vpr) { |
| return false; |
| } |
| if (env->v7m.ltpsize < 4) { |
| return false; |
| } |
| return true; |
| } |
| |
| void cpu_get_tb_cpu_state(CPUARMState *env, target_ulong *pc, |
| target_ulong *cs_base, uint32_t *pflags) |
| { |
| CPUARMTBFlags flags; |
| |
| assert_hflags_rebuild_correctly(env); |
| flags = env->hflags; |
| |
| if (EX_TBFLAG_ANY(flags, AARCH64_STATE)) { |
| *pc = env->pc; |
| if (cpu_isar_feature(aa64_bti, env_archcpu(env))) { |
| DP_TBFLAG_A64(flags, BTYPE, env->btype); |
| } |
| } else { |
| *pc = env->regs[15]; |
| |
| if (arm_feature(env, ARM_FEATURE_M)) { |
| if (arm_feature(env, ARM_FEATURE_M_SECURITY) && |
| FIELD_EX32(env->v7m.fpccr[M_REG_S], V7M_FPCCR, S) |
| != env->v7m.secure) { |
| DP_TBFLAG_M32(flags, FPCCR_S_WRONG, 1); |
| } |
| |
| if ((env->v7m.fpccr[env->v7m.secure] & R_V7M_FPCCR_ASPEN_MASK) && |
| (!(env->v7m.control[M_REG_S] & R_V7M_CONTROL_FPCA_MASK) || |
| (env->v7m.secure && |
| !(env->v7m.control[M_REG_S] & R_V7M_CONTROL_SFPA_MASK)))) { |
| /* |
| * ASPEN is set, but FPCA/SFPA indicate that there is no |
| * active FP context; we must create a new FP context before |
| * executing any FP insn. |
| */ |
| DP_TBFLAG_M32(flags, NEW_FP_CTXT_NEEDED, 1); |
| } |
| |
| bool is_secure = env->v7m.fpccr[M_REG_S] & R_V7M_FPCCR_S_MASK; |
| if (env->v7m.fpccr[is_secure] & R_V7M_FPCCR_LSPACT_MASK) { |
| DP_TBFLAG_M32(flags, LSPACT, 1); |
| } |
| |
| if (mve_no_pred(env)) { |
| DP_TBFLAG_M32(flags, MVE_NO_PRED, 1); |
| } |
| } else { |
| /* |
| * Note that XSCALE_CPAR shares bits with VECSTRIDE. |
| * Note that VECLEN+VECSTRIDE are RES0 for M-profile. |
| */ |
| if (arm_feature(env, ARM_FEATURE_XSCALE)) { |
| DP_TBFLAG_A32(flags, XSCALE_CPAR, env->cp15.c15_cpar); |
| } else { |
| DP_TBFLAG_A32(flags, VECLEN, env->vfp.vec_len); |
| DP_TBFLAG_A32(flags, VECSTRIDE, env->vfp.vec_stride); |
| } |
| if (env->vfp.xregs[ARM_VFP_FPEXC] & (1 << 30)) { |
| DP_TBFLAG_A32(flags, VFPEN, 1); |
| } |
| } |
| |
| DP_TBFLAG_AM32(flags, THUMB, env->thumb); |
| DP_TBFLAG_AM32(flags, CONDEXEC, env->condexec_bits); |
| } |
| |
| /* |
| * The SS_ACTIVE and PSTATE_SS bits correspond to the state machine |
| * states defined in the ARM ARM for software singlestep: |
| * SS_ACTIVE PSTATE.SS State |
| * 0 x Inactive (the TB flag for SS is always 0) |
| * 1 0 Active-pending |
| * 1 1 Active-not-pending |
| * SS_ACTIVE is set in hflags; PSTATE__SS is computed every TB. |
| */ |
| if (EX_TBFLAG_ANY(flags, SS_ACTIVE) && (env->pstate & PSTATE_SS)) { |
| DP_TBFLAG_ANY(flags, PSTATE__SS, 1); |
| } |
| |
| *pflags = flags.flags; |
| *cs_base = flags.flags2; |
| } |
| |
| #ifdef TARGET_AARCH64 |
| /* |
| * The manual says that when SVE is enabled and VQ is widened the |
| * implementation is allowed to zero the previously inaccessible |
| * portion of the registers. The corollary to that is that when |
| * SVE is enabled and VQ is narrowed we are also allowed to zero |
| * the now inaccessible portion of the registers. |
| * |
| * The intent of this is that no predicate bit beyond VQ is ever set. |
| * Which means that some operations on predicate registers themselves |
| * may operate on full uint64_t or even unrolled across the maximum |
| * uint64_t[4]. Performing 4 bits of host arithmetic unconditionally |
| * may well be cheaper than conditionals to restrict the operation |
| * to the relevant portion of a uint16_t[16]. |
| */ |
| void aarch64_sve_narrow_vq(CPUARMState *env, unsigned vq) |
| { |
| int i, j; |
| uint64_t pmask; |
| |
| assert(vq >= 1 && vq <= ARM_MAX_VQ); |
| assert(vq <= env_archcpu(env)->sve_max_vq); |
| |
| /* Zap the high bits of the zregs. */ |
| for (i = 0; i < 32; i++) { |
| memset(&env->vfp.zregs[i].d[2 * vq], 0, 16 * (ARM_MAX_VQ - vq)); |
| } |
| |
| /* Zap the high bits of the pregs and ffr. */ |
| pmask = 0; |
| if (vq & 3) { |
| pmask = ~(-1ULL << (16 * (vq & 3))); |
| } |
| for (j = vq / 4; j < ARM_MAX_VQ / 4; j++) { |
| for (i = 0; i < 17; ++i) { |
| env->vfp.pregs[i].p[j] &= pmask; |
| } |
| pmask = 0; |
| } |
| } |
| |
| /* |
| * Notice a change in SVE vector size when changing EL. |
| */ |
| void aarch64_sve_change_el(CPUARMState *env, int old_el, |
| int new_el, bool el0_a64) |
| { |
| ARMCPU *cpu = env_archcpu(env); |
| int old_len, new_len; |
| bool old_a64, new_a64; |
| |
| /* Nothing to do if no SVE. */ |
| if (!cpu_isar_feature(aa64_sve, cpu)) { |
| return; |
| } |
| |
| /* Nothing to do if FP is disabled in either EL. */ |
| if (fp_exception_el(env, old_el) || fp_exception_el(env, new_el)) { |
| return; |
| } |
| |
| /* |
| * DDI0584A.d sec 3.2: "If SVE instructions are disabled or trapped |
| * at ELx, or not available because the EL is in AArch32 state, then |
| * for all purposes other than a direct read, the ZCR_ELx.LEN field |
| * has an effective value of 0". |
| * |
| * Consider EL2 (aa64, vq=4) -> EL0 (aa32) -> EL1 (aa64, vq=0). |
| * If we ignore aa32 state, we would fail to see the vq4->vq0 transition |
| * from EL2->EL1. Thus we go ahead and narrow when entering aa32 so that |
| * we already have the correct register contents when encountering the |
| * vq0->vq0 transition between EL0->EL1. |
| */ |
| old_a64 = old_el ? arm_el_is_aa64(env, old_el) : el0_a64; |
| old_len = (old_a64 && !sve_exception_el(env, old_el) |
| ? sve_zcr_len_for_el(env, old_el) : 0); |
| new_a64 = new_el ? arm_el_is_aa64(env, new_el) : el0_a64; |
| new_len = (new_a64 && !sve_exception_el(env, new_el) |
| ? sve_zcr_len_for_el(env, new_el) : 0); |
| |
| /* When changing vector length, clear inaccessible state. */ |
| if (new_len < old_len) { |
| aarch64_sve_narrow_vq(env, new_len + 1); |
| } |
| } |
| #endif |