| HXCOMM Use DEFHEADING() to define headings in both help text and rST. |
| HXCOMM Text between SRST and ERST is copied to the rST version and |
| HXCOMM discarded from C version. |
| HXCOMM DEF(command, args, callback, arg_string, help) is used to construct |
| HXCOMM monitor commands |
| HXCOMM HXCOMM can be used for comments, discarded from both rST and C. |
| |
| |
| { |
| .name = "help|?", |
| .args_type = "name:S?", |
| .params = "[cmd]", |
| .help = "show the help", |
| .cmd = do_help_cmd, |
| .flags = "p", |
| }, |
| |
| SRST |
| ``help`` or ``?`` [*cmd*] |
| Show the help for all commands or just for command *cmd*. |
| ERST |
| |
| { |
| .name = "commit", |
| .args_type = "device:B", |
| .params = "device|all", |
| .help = "commit changes to the disk images (if -snapshot is used) or backing files", |
| .cmd = hmp_commit, |
| }, |
| |
| SRST |
| ``commit`` |
| Commit changes to the disk images (if -snapshot is used) or backing files. |
| If the backing file is smaller than the snapshot, then the backing file |
| will be resized to be the same size as the snapshot. If the snapshot is |
| smaller than the backing file, the backing file will not be truncated. |
| If you want the backing file to match the size of the smaller snapshot, |
| you can safely truncate it yourself once the commit operation successfully |
| completes. |
| ERST |
| |
| { |
| .name = "quit|q", |
| .args_type = "", |
| .params = "", |
| .help = "quit the emulator", |
| .cmd = hmp_quit, |
| .flags = "p", |
| }, |
| |
| SRST |
| ``quit`` or ``q`` |
| Quit the emulator. |
| ERST |
| |
| { |
| .name = "exit_preconfig", |
| .args_type = "", |
| .params = "", |
| .help = "exit the preconfig state", |
| .cmd = hmp_exit_preconfig, |
| .flags = "p", |
| }, |
| |
| SRST |
| ``exit_preconfig`` |
| This command makes QEMU exit the preconfig state and proceed with |
| VM initialization using configuration data provided on the command line |
| and via the QMP monitor during the preconfig state. The command is only |
| available during the preconfig state (i.e. when the --preconfig command |
| line option was in use). |
| ERST |
| |
| { |
| .name = "block_resize", |
| .args_type = "device:B,size:o", |
| .params = "device size", |
| .help = "resize a block image", |
| .cmd = hmp_block_resize, |
| .coroutine = true, |
| }, |
| |
| SRST |
| ``block_resize`` |
| Resize a block image while a guest is running. Usually requires guest |
| action to see the updated size. Resize to a lower size is supported, |
| but should be used with extreme caution. Note that this command only |
| resizes image files, it can not resize block devices like LVM volumes. |
| ERST |
| |
| { |
| .name = "block_stream", |
| .args_type = "device:B,speed:o?,base:s?", |
| .params = "device [speed [base]]", |
| .help = "copy data from a backing file into a block device", |
| .cmd = hmp_block_stream, |
| }, |
| |
| SRST |
| ``block_stream`` |
| Copy data from a backing file into a block device. |
| ERST |
| |
| { |
| .name = "block_job_set_speed", |
| .args_type = "device:B,speed:o", |
| .params = "device speed", |
| .help = "set maximum speed for a background block operation", |
| .cmd = hmp_block_job_set_speed, |
| }, |
| |
| SRST |
| ``block_job_set_speed`` |
| Set maximum speed for a background block operation. |
| ERST |
| |
| { |
| .name = "block_job_cancel", |
| .args_type = "force:-f,device:B", |
| .params = "[-f] device", |
| .help = "stop an active background block operation (use -f" |
| "\n\t\t\t if you want to abort the operation immediately" |
| "\n\t\t\t instead of keep running until data is in sync)", |
| .cmd = hmp_block_job_cancel, |
| }, |
| |
| SRST |
| ``block_job_cancel`` |
| Stop an active background block operation (streaming, mirroring). |
| ERST |
| |
| { |
| .name = "block_job_complete", |
| .args_type = "device:B", |
| .params = "device", |
| .help = "stop an active background block operation", |
| .cmd = hmp_block_job_complete, |
| }, |
| |
| SRST |
| ``block_job_complete`` |
| Manually trigger completion of an active background block operation. |
| For mirroring, this will switch the device to the destination path. |
| ERST |
| |
| { |
| .name = "block_job_pause", |
| .args_type = "device:B", |
| .params = "device", |
| .help = "pause an active background block operation", |
| .cmd = hmp_block_job_pause, |
| }, |
| |
| SRST |
| ``block_job_pause`` |
| Pause an active block streaming operation. |
| ERST |
| |
| { |
| .name = "block_job_resume", |
| .args_type = "device:B", |
| .params = "device", |
| .help = "resume a paused background block operation", |
| .cmd = hmp_block_job_resume, |
| }, |
| |
| SRST |
| ``block_job_resume`` |
| Resume a paused block streaming operation. |
| ERST |
| |
| { |
| .name = "eject", |
| .args_type = "force:-f,device:B", |
| .params = "[-f] device", |
| .help = "eject a removable medium (use -f to force it)", |
| .cmd = hmp_eject, |
| }, |
| |
| SRST |
| ``eject [-f]`` *device* |
| Eject a removable medium (use -f to force it). |
| ERST |
| |
| { |
| .name = "drive_del", |
| .args_type = "id:B", |
| .params = "device", |
| .help = "remove host block device", |
| .cmd = hmp_drive_del, |
| }, |
| |
| SRST |
| ``drive_del`` *device* |
| Remove host block device. The result is that guest generated IO is no longer |
| submitted against the host device underlying the disk. Once a drive has |
| been deleted, the QEMU Block layer returns -EIO which results in IO |
| errors in the guest for applications that are reading/writing to the device. |
| These errors are always reported to the guest, regardless of the drive's error |
| actions (drive options rerror, werror). |
| ERST |
| |
| { |
| .name = "change", |
| .args_type = "device:B,target:F,arg:s?,read-only-mode:s?", |
| .params = "device filename [format [read-only-mode]]", |
| .help = "change a removable medium, optional format", |
| .cmd = hmp_change, |
| }, |
| |
| SRST |
| ``change`` *device* *setting* |
| Change the configuration of a device. |
| |
| ``change`` *diskdevice* *filename* [*format* [*read-only-mode*]] |
| Change the medium for a removable disk device to point to *filename*. eg:: |
| |
| (qemu) change ide1-cd0 /path/to/some.iso |
| |
| *format* is optional. |
| |
| *read-only-mode* may be used to change the read-only status of the device. |
| It accepts the following values: |
| |
| retain |
| Retains the current status; this is the default. |
| |
| read-only |
| Makes the device read-only. |
| |
| read-write |
| Makes the device writable. |
| |
| ``change vnc password`` [*password*] |
| |
| Change the password associated with the VNC server. If the new password |
| is not supplied, the monitor will prompt for it to be entered. VNC |
| passwords are only significant up to 8 letters. eg:: |
| |
| (qemu) change vnc password |
| Password: ******** |
| |
| ERST |
| |
| { |
| .name = "screendump", |
| .args_type = "filename:F,device:s?,head:i?", |
| .params = "filename [device [head]]", |
| .help = "save screen from head 'head' of display device 'device' " |
| "into PPM image 'filename'", |
| .cmd = hmp_screendump, |
| .coroutine = true, |
| }, |
| |
| SRST |
| ``screendump`` *filename* |
| Save screen into PPM image *filename*. |
| ERST |
| |
| { |
| .name = "logfile", |
| .args_type = "filename:F", |
| .params = "filename", |
| .help = "output logs to 'filename'", |
| .cmd = hmp_logfile, |
| }, |
| |
| SRST |
| ``logfile`` *filename* |
| Output logs to *filename*. |
| ERST |
| |
| { |
| .name = "trace-event", |
| .args_type = "name:s,option:b,vcpu:i?", |
| .params = "name on|off [vcpu]", |
| .help = "changes status of a specific trace event " |
| "(vcpu: vCPU to set, default is all)", |
| .cmd = hmp_trace_event, |
| .command_completion = trace_event_completion, |
| }, |
| |
| SRST |
| ``trace-event`` |
| changes status of a trace event |
| ERST |
| |
| #if defined(CONFIG_TRACE_SIMPLE) |
| { |
| .name = "trace-file", |
| .args_type = "op:s?,arg:F?", |
| .params = "on|off|flush|set [arg]", |
| .help = "open, close, or flush trace file, or set a new file name", |
| .cmd = hmp_trace_file, |
| }, |
| |
| SRST |
| ``trace-file on|off|flush`` |
| Open, close, or flush the trace file. If no argument is given, the |
| status of the trace file is displayed. |
| ERST |
| #endif |
| |
| { |
| .name = "log", |
| .args_type = "items:s", |
| .params = "item1[,...]", |
| .help = "activate logging of the specified items", |
| .cmd = hmp_log, |
| }, |
| |
| SRST |
| ``log`` *item1*\ [,...] |
| Activate logging of the specified items. |
| ERST |
| |
| { |
| .name = "savevm", |
| .args_type = "name:s?", |
| .params = "tag", |
| .help = "save a VM snapshot. If no tag is provided, a new snapshot is created", |
| .cmd = hmp_savevm, |
| }, |
| |
| SRST |
| ``savevm`` *tag* |
| Create a snapshot of the whole virtual machine. If *tag* is |
| provided, it is used as human readable identifier. If there is already |
| a snapshot with the same tag, it is replaced. More info at |
| :ref:`vm_005fsnapshots`. |
| |
| Since 4.0, savevm stopped allowing the snapshot id to be set, accepting |
| only *tag* as parameter. |
| ERST |
| |
| { |
| .name = "loadvm", |
| .args_type = "name:s", |
| .params = "tag", |
| .help = "restore a VM snapshot from its tag", |
| .cmd = hmp_loadvm, |
| .command_completion = loadvm_completion, |
| }, |
| |
| SRST |
| ``loadvm`` *tag* |
| Set the whole virtual machine to the snapshot identified by the tag |
| *tag*. |
| |
| Since 4.0, loadvm stopped accepting snapshot id as parameter. |
| ERST |
| |
| { |
| .name = "delvm", |
| .args_type = "name:s", |
| .params = "tag", |
| .help = "delete a VM snapshot from its tag", |
| .cmd = hmp_delvm, |
| .command_completion = delvm_completion, |
| }, |
| |
| SRST |
| ``delvm`` *tag* |
| Delete the snapshot identified by *tag*. |
| |
| Since 4.0, delvm stopped deleting snapshots by snapshot id, accepting |
| only *tag* as parameter. |
| ERST |
| |
| { |
| .name = "singlestep", |
| .args_type = "option:s?", |
| .params = "[on|off]", |
| .help = "run emulation in singlestep mode or switch to normal mode", |
| .cmd = hmp_singlestep, |
| }, |
| |
| SRST |
| ``singlestep [off]`` |
| Run the emulation in single step mode. |
| If called with option off, the emulation returns to normal mode. |
| ERST |
| |
| { |
| .name = "stop|s", |
| .args_type = "", |
| .params = "", |
| .help = "stop emulation", |
| .cmd = hmp_stop, |
| }, |
| |
| SRST |
| ``stop`` or ``s`` |
| Stop emulation. |
| ERST |
| |
| { |
| .name = "cont|c", |
| .args_type = "", |
| .params = "", |
| .help = "resume emulation", |
| .cmd = hmp_cont, |
| }, |
| |
| SRST |
| ``cont`` or ``c`` |
| Resume emulation. |
| ERST |
| |
| { |
| .name = "system_wakeup", |
| .args_type = "", |
| .params = "", |
| .help = "wakeup guest from suspend", |
| .cmd = hmp_system_wakeup, |
| }, |
| |
| SRST |
| ``system_wakeup`` |
| Wakeup guest from suspend. |
| ERST |
| |
| { |
| .name = "gdbserver", |
| .args_type = "device:s?", |
| .params = "[device]", |
| .help = "start gdbserver on given device (default 'tcp::1234'), stop with 'none'", |
| .cmd = hmp_gdbserver, |
| }, |
| |
| SRST |
| ``gdbserver`` [*port*] |
| Start gdbserver session (default *port*\=1234) |
| ERST |
| |
| { |
| .name = "x", |
| .args_type = "fmt:/,addr:l", |
| .params = "/fmt addr", |
| .help = "virtual memory dump starting at 'addr'", |
| .cmd = hmp_memory_dump, |
| }, |
| |
| SRST |
| ``x/``\ *fmt* *addr* |
| Virtual memory dump starting at *addr*. |
| ERST |
| |
| { |
| .name = "xp", |
| .args_type = "fmt:/,addr:l", |
| .params = "/fmt addr", |
| .help = "physical memory dump starting at 'addr'", |
| .cmd = hmp_physical_memory_dump, |
| }, |
| |
| SRST |
| ``xp /``\ *fmt* *addr* |
| Physical memory dump starting at *addr*. |
| |
| *fmt* is a format which tells the command how to format the |
| data. Its syntax is: ``/{count}{format}{size}`` |
| |
| *count* |
| is the number of items to be dumped. |
| *format* |
| can be x (hex), d (signed decimal), u (unsigned decimal), o (octal), |
| c (char) or i (asm instruction). |
| *size* |
| can be b (8 bits), h (16 bits), w (32 bits) or g (64 bits). On x86, |
| ``h`` or ``w`` can be specified with the ``i`` format to |
| respectively select 16 or 32 bit code instruction size. |
| |
| Examples: |
| |
| Dump 10 instructions at the current instruction pointer:: |
| |
| (qemu) x/10i $eip |
| 0x90107063: ret |
| 0x90107064: sti |
| 0x90107065: lea 0x0(%esi,1),%esi |
| 0x90107069: lea 0x0(%edi,1),%edi |
| 0x90107070: ret |
| 0x90107071: jmp 0x90107080 |
| 0x90107073: nop |
| 0x90107074: nop |
| 0x90107075: nop |
| 0x90107076: nop |
| |
| Dump 80 16 bit values at the start of the video memory:: |
| |
| (qemu) xp/80hx 0xb8000 |
| 0x000b8000: 0x0b50 0x0b6c 0x0b65 0x0b78 0x0b38 0x0b36 0x0b2f 0x0b42 |
| 0x000b8010: 0x0b6f 0x0b63 0x0b68 0x0b73 0x0b20 0x0b56 0x0b47 0x0b41 |
| 0x000b8020: 0x0b42 0x0b69 0x0b6f 0x0b73 0x0b20 0x0b63 0x0b75 0x0b72 |
| 0x000b8030: 0x0b72 0x0b65 0x0b6e 0x0b74 0x0b2d 0x0b63 0x0b76 0x0b73 |
| 0x000b8040: 0x0b20 0x0b30 0x0b35 0x0b20 0x0b4e 0x0b6f 0x0b76 0x0b20 |
| 0x000b8050: 0x0b32 0x0b30 0x0b30 0x0b33 0x0720 0x0720 0x0720 0x0720 |
| 0x000b8060: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 |
| 0x000b8070: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 |
| 0x000b8080: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 |
| 0x000b8090: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 |
| |
| ERST |
| |
| { |
| .name = "gpa2hva", |
| .args_type = "addr:l", |
| .params = "addr", |
| .help = "print the host virtual address corresponding to a guest physical address", |
| .cmd = hmp_gpa2hva, |
| }, |
| |
| SRST |
| ``gpa2hva`` *addr* |
| Print the host virtual address at which the guest's physical address *addr* |
| is mapped. |
| ERST |
| |
| #ifdef CONFIG_LINUX |
| { |
| .name = "gpa2hpa", |
| .args_type = "addr:l", |
| .params = "addr", |
| .help = "print the host physical address corresponding to a guest physical address", |
| .cmd = hmp_gpa2hpa, |
| }, |
| #endif |
| |
| SRST |
| ``gpa2hpa`` *addr* |
| Print the host physical address at which the guest's physical address *addr* |
| is mapped. |
| ERST |
| |
| { |
| .name = "gva2gpa", |
| .args_type = "addr:l", |
| .params = "addr", |
| .help = "print the guest physical address corresponding to a guest virtual address", |
| .cmd = hmp_gva2gpa, |
| }, |
| |
| SRST |
| ``gva2gpa`` *addr* |
| Print the guest physical address at which the guest's virtual address *addr* |
| is mapped based on the mapping for the current CPU. |
| ERST |
| |
| { |
| .name = "print|p", |
| .args_type = "fmt:/,val:l", |
| .params = "/fmt expr", |
| .help = "print expression value (use $reg for CPU register access)", |
| .cmd = do_print, |
| }, |
| |
| SRST |
| ``print`` or ``p/``\ *fmt* *expr* |
| Print expression value. Only the *format* part of *fmt* is |
| used. |
| ERST |
| |
| { |
| .name = "i", |
| .args_type = "fmt:/,addr:i,index:i.", |
| .params = "/fmt addr", |
| .help = "I/O port read", |
| .cmd = hmp_ioport_read, |
| }, |
| |
| SRST |
| ``i/``\ *fmt* *addr* [.\ *index*\ ] |
| Read I/O port. |
| ERST |
| |
| { |
| .name = "o", |
| .args_type = "fmt:/,addr:i,val:i", |
| .params = "/fmt addr value", |
| .help = "I/O port write", |
| .cmd = hmp_ioport_write, |
| }, |
| |
| SRST |
| ``o/``\ *fmt* *addr* *val* |
| Write to I/O port. |
| ERST |
| |
| { |
| .name = "sendkey", |
| .args_type = "keys:s,hold-time:i?", |
| .params = "keys [hold_ms]", |
| .help = "send keys to the VM (e.g. 'sendkey ctrl-alt-f1', default hold time=100 ms)", |
| .cmd = hmp_sendkey, |
| .command_completion = sendkey_completion, |
| }, |
| |
| SRST |
| ``sendkey`` *keys* |
| Send *keys* to the guest. *keys* could be the name of the |
| key or the raw value in hexadecimal format. Use ``-`` to press |
| several keys simultaneously. Example:: |
| |
| sendkey ctrl-alt-f1 |
| |
| This command is useful to send keys that your graphical user interface |
| intercepts at low level, such as ``ctrl-alt-f1`` in X Window. |
| ERST |
| { |
| .name = "sync-profile", |
| .args_type = "op:s?", |
| .params = "[on|off|reset]", |
| .help = "enable, disable or reset synchronization profiling. " |
| "With no arguments, prints whether profiling is on or off.", |
| .cmd = hmp_sync_profile, |
| }, |
| |
| SRST |
| ``sync-profile [on|off|reset]`` |
| Enable, disable or reset synchronization profiling. With no arguments, prints |
| whether profiling is on or off. |
| ERST |
| |
| { |
| .name = "system_reset", |
| .args_type = "", |
| .params = "", |
| .help = "reset the system", |
| .cmd = hmp_system_reset, |
| }, |
| |
| SRST |
| ``system_reset`` |
| Reset the system. |
| ERST |
| |
| { |
| .name = "system_powerdown", |
| .args_type = "", |
| .params = "", |
| .help = "send system power down event", |
| .cmd = hmp_system_powerdown, |
| }, |
| |
| SRST |
| ``system_powerdown`` |
| Power down the system (if supported). |
| ERST |
| |
| { |
| .name = "sum", |
| .args_type = "start:i,size:i", |
| .params = "addr size", |
| .help = "compute the checksum of a memory region", |
| .cmd = hmp_sum, |
| }, |
| |
| SRST |
| ``sum`` *addr* *size* |
| Compute the checksum of a memory region. |
| ERST |
| |
| { |
| .name = "device_add", |
| .args_type = "device:O", |
| .params = "driver[,prop=value][,...]", |
| .help = "add device, like -device on the command line", |
| .cmd = hmp_device_add, |
| .command_completion = device_add_completion, |
| }, |
| |
| SRST |
| ``device_add`` *config* |
| Add device. |
| ERST |
| |
| { |
| .name = "device_del", |
| .args_type = "id:s", |
| .params = "device", |
| .help = "remove device", |
| .cmd = hmp_device_del, |
| .command_completion = device_del_completion, |
| }, |
| |
| SRST |
| ``device_del`` *id* |
| Remove device *id*. *id* may be a short ID |
| or a QOM object path. |
| ERST |
| |
| { |
| .name = "cpu", |
| .args_type = "index:i", |
| .params = "index", |
| .help = "set the default CPU", |
| .cmd = hmp_cpu, |
| }, |
| |
| SRST |
| ``cpu`` *index* |
| Set the default CPU. |
| ERST |
| |
| { |
| .name = "mouse_move", |
| .args_type = "dx_str:s,dy_str:s,dz_str:s?", |
| .params = "dx dy [dz]", |
| .help = "send mouse move events", |
| .cmd = hmp_mouse_move, |
| }, |
| |
| SRST |
| ``mouse_move`` *dx* *dy* [*dz*] |
| Move the active mouse to the specified coordinates *dx* *dy* |
| with optional scroll axis *dz*. |
| ERST |
| |
| { |
| .name = "mouse_button", |
| .args_type = "button_state:i", |
| .params = "state", |
| .help = "change mouse button state (1=L, 2=M, 4=R)", |
| .cmd = hmp_mouse_button, |
| }, |
| |
| SRST |
| ``mouse_button`` *val* |
| Change the active mouse button state *val* (1=L, 2=M, 4=R). |
| ERST |
| |
| { |
| .name = "mouse_set", |
| .args_type = "index:i", |
| .params = "index", |
| .help = "set which mouse device receives events", |
| .cmd = hmp_mouse_set, |
| }, |
| |
| SRST |
| ``mouse_set`` *index* |
| Set which mouse device receives events at given *index*, index |
| can be obtained with:: |
| |
| info mice |
| |
| ERST |
| |
| { |
| .name = "wavcapture", |
| .args_type = "path:F,audiodev:s,freq:i?,bits:i?,nchannels:i?", |
| .params = "path audiodev [frequency [bits [channels]]]", |
| .help = "capture audio to a wave file (default frequency=44100 bits=16 channels=2)", |
| .cmd = hmp_wavcapture, |
| }, |
| SRST |
| ``wavcapture`` *filename* *audiodev* [*frequency* [*bits* [*channels*]]] |
| Capture audio into *filename* from *audiodev*, using sample rate |
| *frequency* bits per sample *bits* and number of channels |
| *channels*. |
| |
| Defaults: |
| |
| - Sample rate = 44100 Hz - CD quality |
| - Bits = 16 |
| - Number of channels = 2 - Stereo |
| ERST |
| |
| { |
| .name = "stopcapture", |
| .args_type = "n:i", |
| .params = "capture index", |
| .help = "stop capture", |
| .cmd = hmp_stopcapture, |
| }, |
| SRST |
| ``stopcapture`` *index* |
| Stop capture with a given *index*, index can be obtained with:: |
| |
| info capture |
| |
| ERST |
| |
| { |
| .name = "memsave", |
| .args_type = "val:l,size:i,filename:s", |
| .params = "addr size file", |
| .help = "save to disk virtual memory dump starting at 'addr' of size 'size'", |
| .cmd = hmp_memsave, |
| }, |
| |
| SRST |
| ``memsave`` *addr* *size* *file* |
| save to disk virtual memory dump starting at *addr* of size *size*. |
| ERST |
| |
| { |
| .name = "pmemsave", |
| .args_type = "val:l,size:i,filename:s", |
| .params = "addr size file", |
| .help = "save to disk physical memory dump starting at 'addr' of size 'size'", |
| .cmd = hmp_pmemsave, |
| }, |
| |
| SRST |
| ``pmemsave`` *addr* *size* *file* |
| save to disk physical memory dump starting at *addr* of size *size*. |
| ERST |
| |
| { |
| .name = "boot_set", |
| .args_type = "bootdevice:s", |
| .params = "bootdevice", |
| .help = "define new values for the boot device list", |
| .cmd = hmp_boot_set, |
| }, |
| |
| SRST |
| ``boot_set`` *bootdevicelist* |
| Define new values for the boot device list. Those values will override |
| the values specified on the command line through the ``-boot`` option. |
| |
| The values that can be specified here depend on the machine type, but are |
| the same that can be specified in the ``-boot`` command line option. |
| ERST |
| |
| { |
| .name = "nmi", |
| .args_type = "", |
| .params = "", |
| .help = "inject an NMI", |
| .cmd = hmp_nmi, |
| }, |
| SRST |
| ``nmi`` *cpu* |
| Inject an NMI on the default CPU (x86/s390) or all CPUs (ppc64). |
| ERST |
| |
| { |
| .name = "ringbuf_write", |
| .args_type = "device:s,data:s", |
| .params = "device data", |
| .help = "Write to a ring buffer character device", |
| .cmd = hmp_ringbuf_write, |
| .command_completion = ringbuf_write_completion, |
| }, |
| |
| SRST |
| ``ringbuf_write`` *device* *data* |
| Write *data* to ring buffer character device *device*. |
| *data* must be a UTF-8 string. |
| ERST |
| |
| { |
| .name = "ringbuf_read", |
| .args_type = "device:s,size:i", |
| .params = "device size", |
| .help = "Read from a ring buffer character device", |
| .cmd = hmp_ringbuf_read, |
| .command_completion = ringbuf_write_completion, |
| }, |
| |
| SRST |
| ``ringbuf_read`` *device* |
| Read and print up to *size* bytes from ring buffer character |
| device *device*. |
| Certain non-printable characters are printed ``\uXXXX``, where ``XXXX`` is the |
| character code in hexadecimal. Character ``\`` is printed ``\\``. |
| Bug: can screw up when the buffer contains invalid UTF-8 sequences, |
| NUL characters, after the ring buffer lost data, and when reading |
| stops because the size limit is reached. |
| ERST |
| |
| { |
| .name = "announce_self", |
| .args_type = "interfaces:s?,id:s?", |
| .params = "[interfaces] [id]", |
| .help = "Trigger GARP/RARP announcements", |
| .cmd = hmp_announce_self, |
| }, |
| |
| SRST |
| ``announce_self`` |
| Trigger a round of GARP/RARP broadcasts; this is useful for explicitly |
| updating the network infrastructure after a reconfiguration or some forms |
| of migration. The timings of the round are set by the migration announce |
| parameters. An optional comma separated *interfaces* list restricts the |
| announce to the named set of interfaces. An optional *id* can be used to |
| start a separate announce timer and to change the parameters of it later. |
| ERST |
| |
| { |
| .name = "migrate", |
| .args_type = "detach:-d,blk:-b,inc:-i,resume:-r,uri:s", |
| .params = "[-d] [-b] [-i] [-r] uri", |
| .help = "migrate to URI (using -d to not wait for completion)" |
| "\n\t\t\t -b for migration without shared storage with" |
| " full copy of disk\n\t\t\t -i for migration without " |
| "shared storage with incremental copy of disk " |
| "(base image shared between src and destination)" |
| "\n\t\t\t -r to resume a paused migration", |
| .cmd = hmp_migrate, |
| }, |
| |
| |
| SRST |
| ``migrate [-d] [-b] [-i]`` *uri* |
| Migrate to *uri* (using -d to not wait for completion). |
| |
| ``-b`` |
| for migration with full copy of disk |
| ``-i`` |
| for migration with incremental copy of disk (base image is shared) |
| ERST |
| |
| { |
| .name = "migrate_cancel", |
| .args_type = "", |
| .params = "", |
| .help = "cancel the current VM migration", |
| .cmd = hmp_migrate_cancel, |
| }, |
| |
| SRST |
| ``migrate_cancel`` |
| Cancel the current VM migration. |
| ERST |
| |
| { |
| .name = "migrate_continue", |
| .args_type = "state:s", |
| .params = "state", |
| .help = "Continue migration from the given paused state", |
| .cmd = hmp_migrate_continue, |
| }, |
| SRST |
| ``migrate_continue`` *state* |
| Continue migration from the paused state *state* |
| ERST |
| |
| { |
| .name = "migrate_incoming", |
| .args_type = "uri:s", |
| .params = "uri", |
| .help = "Continue an incoming migration from an -incoming defer", |
| .cmd = hmp_migrate_incoming, |
| }, |
| |
| SRST |
| ``migrate_incoming`` *uri* |
| Continue an incoming migration using the *uri* (that has the same syntax |
| as the ``-incoming`` option). |
| ERST |
| |
| { |
| .name = "migrate_recover", |
| .args_type = "uri:s", |
| .params = "uri", |
| .help = "Continue a paused incoming postcopy migration", |
| .cmd = hmp_migrate_recover, |
| }, |
| |
| SRST |
| ``migrate_recover`` *uri* |
| Continue a paused incoming postcopy migration using the *uri*. |
| ERST |
| |
| { |
| .name = "migrate_pause", |
| .args_type = "", |
| .params = "", |
| .help = "Pause an ongoing migration (postcopy-only)", |
| .cmd = hmp_migrate_pause, |
| }, |
| |
| SRST |
| ``migrate_pause`` |
| Pause an ongoing migration. Currently it only supports postcopy. |
| ERST |
| |
| { |
| .name = "migrate_set_capability", |
| .args_type = "capability:s,state:b", |
| .params = "capability state", |
| .help = "Enable/Disable the usage of a capability for migration", |
| .cmd = hmp_migrate_set_capability, |
| .command_completion = migrate_set_capability_completion, |
| }, |
| |
| SRST |
| ``migrate_set_capability`` *capability* *state* |
| Enable/Disable the usage of a capability *capability* for migration. |
| ERST |
| |
| { |
| .name = "migrate_set_parameter", |
| .args_type = "parameter:s,value:s", |
| .params = "parameter value", |
| .help = "Set the parameter for migration", |
| .cmd = hmp_migrate_set_parameter, |
| .command_completion = migrate_set_parameter_completion, |
| }, |
| |
| SRST |
| ``migrate_set_parameter`` *parameter* *value* |
| Set the parameter *parameter* for migration. |
| ERST |
| |
| { |
| .name = "migrate_start_postcopy", |
| .args_type = "", |
| .params = "", |
| .help = "Followup to a migration command to switch the migration" |
| " to postcopy mode. The postcopy-ram capability must " |
| "be set on both source and destination before the " |
| "original migration command .", |
| .cmd = hmp_migrate_start_postcopy, |
| }, |
| |
| SRST |
| ``migrate_start_postcopy`` |
| Switch in-progress migration to postcopy mode. Ignored after the end of |
| migration (or once already in postcopy). |
| ERST |
| |
| { |
| .name = "x_colo_lost_heartbeat", |
| .args_type = "", |
| .params = "", |
| .help = "Tell COLO that heartbeat is lost,\n\t\t\t" |
| "a failover or takeover is needed.", |
| .cmd = hmp_x_colo_lost_heartbeat, |
| }, |
| |
| SRST |
| ``x_colo_lost_heartbeat`` |
| Tell COLO that heartbeat is lost, a failover or takeover is needed. |
| ERST |
| |
| { |
| .name = "client_migrate_info", |
| .args_type = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?", |
| .params = "protocol hostname port tls-port cert-subject", |
| .help = "set migration information for remote display", |
| .cmd = hmp_client_migrate_info, |
| }, |
| |
| SRST |
| ``client_migrate_info`` *protocol* *hostname* *port* *tls-port* *cert-subject* |
| Set migration information for remote display. This makes the server |
| ask the client to automatically reconnect using the new parameters |
| once migration finished successfully. Only implemented for SPICE. |
| ERST |
| |
| { |
| .name = "dump-guest-memory", |
| .args_type = "paging:-p,detach:-d,windmp:-w,zlib:-z,lzo:-l,snappy:-s,filename:F,begin:l?,length:l?", |
| .params = "[-p] [-d] [-z|-l|-s|-w] filename [begin length]", |
| .help = "dump guest memory into file 'filename'.\n\t\t\t" |
| "-p: do paging to get guest's memory mapping.\n\t\t\t" |
| "-d: return immediately (do not wait for completion).\n\t\t\t" |
| "-z: dump in kdump-compressed format, with zlib compression.\n\t\t\t" |
| "-l: dump in kdump-compressed format, with lzo compression.\n\t\t\t" |
| "-s: dump in kdump-compressed format, with snappy compression.\n\t\t\t" |
| "-w: dump in Windows crashdump format (can be used instead of ELF-dump converting),\n\t\t\t" |
| " for Windows x64 guests with vmcoreinfo driver only.\n\t\t\t" |
| "begin: the starting physical address.\n\t\t\t" |
| "length: the memory size, in bytes.", |
| .cmd = hmp_dump_guest_memory, |
| }, |
| |
| SRST |
| ``dump-guest-memory [-p]`` *filename* *begin* *length* |
| \ |
| ``dump-guest-memory [-z|-l|-s|-w]`` *filename* |
| Dump guest memory to *protocol*. The file can be processed with crash or |
| gdb. Without ``-z|-l|-s|-w``, the dump format is ELF. |
| |
| ``-p`` |
| do paging to get guest's memory mapping. |
| ``-z`` |
| dump in kdump-compressed format, with zlib compression. |
| ``-l`` |
| dump in kdump-compressed format, with lzo compression. |
| ``-s`` |
| dump in kdump-compressed format, with snappy compression. |
| ``-w`` |
| dump in Windows crashdump format (can be used instead of ELF-dump converting), |
| for Windows x64 guests with vmcoreinfo driver only |
| *filename* |
| dump file name. |
| *begin* |
| the starting physical address. It's optional, and should be |
| specified together with *length*. |
| *length* |
| the memory size, in bytes. It's optional, and should be specified |
| together with *begin*. |
| |
| ERST |
| |
| #if defined(TARGET_S390X) |
| { |
| .name = "dump-skeys", |
| .args_type = "filename:F", |
| .params = "", |
| .help = "Save guest storage keys into file 'filename'.\n", |
| .cmd = hmp_dump_skeys, |
| }, |
| #endif |
| |
| SRST |
| ``dump-skeys`` *filename* |
| Save guest storage keys to a file. |
| ERST |
| |
| #if defined(TARGET_S390X) |
| { |
| .name = "migration_mode", |
| .args_type = "mode:i", |
| .params = "mode", |
| .help = "Enables or disables migration mode\n", |
| .cmd = hmp_migrationmode, |
| }, |
| #endif |
| |
| SRST |
| ``migration_mode`` *mode* |
| Enables or disables migration mode. |
| ERST |
| |
| { |
| .name = "snapshot_blkdev", |
| .args_type = "reuse:-n,device:B,snapshot-file:s?,format:s?", |
| .params = "[-n] device [new-image-file] [format]", |
| .help = "initiates a live snapshot\n\t\t\t" |
| "of device. If a new image file is specified, the\n\t\t\t" |
| "new image file will become the new root image.\n\t\t\t" |
| "If format is specified, the snapshot file will\n\t\t\t" |
| "be created in that format.\n\t\t\t" |
| "The default format is qcow2. The -n flag requests QEMU\n\t\t\t" |
| "to reuse the image found in new-image-file, instead of\n\t\t\t" |
| "recreating it from scratch.", |
| .cmd = hmp_snapshot_blkdev, |
| }, |
| |
| SRST |
| ``snapshot_blkdev`` |
| Snapshot device, using snapshot file as target if provided |
| ERST |
| |
| { |
| .name = "snapshot_blkdev_internal", |
| .args_type = "device:B,name:s", |
| .params = "device name", |
| .help = "take an internal snapshot of device.\n\t\t\t" |
| "The format of the image used by device must\n\t\t\t" |
| "support it, such as qcow2.\n\t\t\t", |
| .cmd = hmp_snapshot_blkdev_internal, |
| }, |
| |
| SRST |
| ``snapshot_blkdev_internal`` |
| Take an internal snapshot on device if it support |
| ERST |
| |
| { |
| .name = "snapshot_delete_blkdev_internal", |
| .args_type = "device:B,name:s,id:s?", |
| .params = "device name [id]", |
| .help = "delete an internal snapshot of device.\n\t\t\t" |
| "If id is specified, qemu will try delete\n\t\t\t" |
| "the snapshot matching both id and name.\n\t\t\t" |
| "The format of the image used by device must\n\t\t\t" |
| "support it, such as qcow2.\n\t\t\t", |
| .cmd = hmp_snapshot_delete_blkdev_internal, |
| }, |
| |
| SRST |
| ``snapshot_delete_blkdev_internal`` |
| Delete an internal snapshot on device if it support |
| ERST |
| |
| { |
| .name = "drive_mirror", |
| .args_type = "reuse:-n,full:-f,device:B,target:s,format:s?", |
| .params = "[-n] [-f] device target [format]", |
| .help = "initiates live storage\n\t\t\t" |
| "migration for a device. The device's contents are\n\t\t\t" |
| "copied to the new image file, including data that\n\t\t\t" |
| "is written after the command is started.\n\t\t\t" |
| "The -n flag requests QEMU to reuse the image found\n\t\t\t" |
| "in new-image-file, instead of recreating it from scratch.\n\t\t\t" |
| "The -f flag requests QEMU to copy the whole disk,\n\t\t\t" |
| "so that the result does not need a backing file.\n\t\t\t", |
| .cmd = hmp_drive_mirror, |
| }, |
| SRST |
| ``drive_mirror`` |
| Start mirroring a block device's writes to a new destination, |
| using the specified target. |
| ERST |
| |
| { |
| .name = "drive_backup", |
| .args_type = "reuse:-n,full:-f,compress:-c,device:B,target:s,format:s?", |
| .params = "[-n] [-f] [-c] device target [format]", |
| .help = "initiates a point-in-time\n\t\t\t" |
| "copy for a device. The device's contents are\n\t\t\t" |
| "copied to the new image file, excluding data that\n\t\t\t" |
| "is written after the command is started.\n\t\t\t" |
| "The -n flag requests QEMU to reuse the image found\n\t\t\t" |
| "in new-image-file, instead of recreating it from scratch.\n\t\t\t" |
| "The -f flag requests QEMU to copy the whole disk,\n\t\t\t" |
| "so that the result does not need a backing file.\n\t\t\t" |
| "The -c flag requests QEMU to compress backup data\n\t\t\t" |
| "(if the target format supports it).\n\t\t\t", |
| .cmd = hmp_drive_backup, |
| }, |
| SRST |
| ``drive_backup`` |
| Start a point-in-time copy of a block device to a specified target. |
| ERST |
| |
| { |
| .name = "drive_add", |
| .args_type = "node:-n,pci_addr:s,opts:s", |
| .params = "[-n] [[<domain>:]<bus>:]<slot>\n" |
| "[file=file][,if=type][,bus=n]\n" |
| "[,unit=m][,media=d][,index=i]\n" |
| "[,snapshot=on|off][,cache=on|off]\n" |
| "[,readonly=on|off][,copy-on-read=on|off]", |
| .help = "add drive to PCI storage controller", |
| .cmd = hmp_drive_add, |
| }, |
| |
| SRST |
| ``drive_add`` |
| Add drive to PCI storage controller. |
| ERST |
| |
| { |
| .name = "pcie_aer_inject_error", |
| .args_type = "advisory_non_fatal:-a,correctable:-c," |
| "id:s,error_status:s," |
| "header0:i?,header1:i?,header2:i?,header3:i?," |
| "prefix0:i?,prefix1:i?,prefix2:i?,prefix3:i?", |
| .params = "[-a] [-c] id " |
| "<error_status> [<tlp header> [<tlp header prefix>]]", |
| .help = "inject pcie aer error\n\t\t\t" |
| " -a for advisory non fatal error\n\t\t\t" |
| " -c for correctable error\n\t\t\t" |
| "<id> = qdev device id\n\t\t\t" |
| "<error_status> = error string or 32bit\n\t\t\t" |
| "<tlp header> = 32bit x 4\n\t\t\t" |
| "<tlp header prefix> = 32bit x 4", |
| .cmd = hmp_pcie_aer_inject_error, |
| }, |
| |
| SRST |
| ``pcie_aer_inject_error`` |
| Inject PCIe AER error |
| ERST |
| |
| { |
| .name = "netdev_add", |
| .args_type = "netdev:O", |
| .params = "[user|tap|socket|vde|bridge|hubport|netmap|vhost-user],id=str[,prop=value][,...]", |
| .help = "add host network device", |
| .cmd = hmp_netdev_add, |
| .command_completion = netdev_add_completion, |
| .flags = "p", |
| }, |
| |
| SRST |
| ``netdev_add`` |
| Add host network device. |
| ERST |
| |
| { |
| .name = "netdev_del", |
| .args_type = "id:s", |
| .params = "id", |
| .help = "remove host network device", |
| .cmd = hmp_netdev_del, |
| .command_completion = netdev_del_completion, |
| .flags = "p", |
| }, |
| |
| SRST |
| ``netdev_del`` |
| Remove host network device. |
| ERST |
| |
| { |
| .name = "object_add", |
| .args_type = "object:S", |
| .params = "[qom-type=]type,id=str[,prop=value][,...]", |
| .help = "create QOM object", |
| .cmd = hmp_object_add, |
| .command_completion = object_add_completion, |
| .flags = "p", |
| }, |
| |
| SRST |
| ``object_add`` |
| Create QOM object. |
| ERST |
| |
| { |
| .name = "object_del", |
| .args_type = "id:s", |
| .params = "id", |
| .help = "destroy QOM object", |
| .cmd = hmp_object_del, |
| .command_completion = object_del_completion, |
| .flags = "p", |
| }, |
| |
| SRST |
| ``object_del`` |
| Destroy QOM object. |
| ERST |
| |
| #ifdef CONFIG_SLIRP |
| { |
| .name = "hostfwd_add", |
| .args_type = "arg1:s,arg2:s?", |
| .params = "[netdev_id] [tcp|udp]:[hostaddr]:hostport-[guestaddr]:guestport", |
| .help = "redirect TCP or UDP connections from host to guest (requires -net user)", |
| .cmd = hmp_hostfwd_add, |
| }, |
| #endif |
| SRST |
| ``hostfwd_add`` |
| Redirect TCP or UDP connections from host to guest (requires -net user). |
| ERST |
| |
| #ifdef CONFIG_SLIRP |
| { |
| .name = "hostfwd_remove", |
| .args_type = "arg1:s,arg2:s?", |
| .params = "[netdev_id] [tcp|udp]:[hostaddr]:hostport", |
| .help = "remove host-to-guest TCP or UDP redirection", |
| .cmd = hmp_hostfwd_remove, |
| }, |
| |
| #endif |
| SRST |
| ``hostfwd_remove`` |
| Remove host-to-guest TCP or UDP redirection. |
| ERST |
| |
| { |
| .name = "balloon", |
| .args_type = "value:M", |
| .params = "target", |
| .help = "request VM to change its memory allocation (in MB)", |
| .cmd = hmp_balloon, |
| }, |
| |
| SRST |
| ``balloon`` *value* |
| Request VM to change its memory allocation to *value* (in MB). |
| ERST |
| |
| { |
| .name = "set_link", |
| .args_type = "name:s,up:b", |
| .params = "name on|off", |
| .help = "change the link status of a network adapter", |
| .cmd = hmp_set_link, |
| .command_completion = set_link_completion, |
| }, |
| |
| SRST |
| ``set_link`` *name* ``[on|off]`` |
| Switch link *name* on (i.e. up) or off (i.e. down). |
| ERST |
| |
| { |
| .name = "watchdog_action", |
| .args_type = "action:s", |
| .params = "[reset|shutdown|poweroff|pause|debug|none]", |
| .help = "change watchdog action", |
| .cmd = hmp_watchdog_action, |
| .command_completion = watchdog_action_completion, |
| }, |
| |
| SRST |
| ``watchdog_action`` |
| Change watchdog action. |
| ERST |
| |
| { |
| .name = "nbd_server_start", |
| .args_type = "all:-a,writable:-w,uri:s", |
| .params = "nbd_server_start [-a] [-w] host:port", |
| .help = "serve block devices on the given host and port", |
| .cmd = hmp_nbd_server_start, |
| }, |
| SRST |
| ``nbd_server_start`` *host*:*port* |
| Start an NBD server on the given host and/or port. If the ``-a`` |
| option is included, all of the virtual machine's block devices that |
| have an inserted media on them are automatically exported; in this case, |
| the ``-w`` option makes the devices writable too. |
| ERST |
| |
| { |
| .name = "nbd_server_add", |
| .args_type = "writable:-w,device:B,name:s?", |
| .params = "nbd_server_add [-w] device [name]", |
| .help = "export a block device via NBD", |
| .cmd = hmp_nbd_server_add, |
| }, |
| SRST |
| ``nbd_server_add`` *device* [ *name* ] |
| Export a block device through QEMU's NBD server, which must be started |
| beforehand with ``nbd_server_start``. The ``-w`` option makes the |
| exported device writable too. The export name is controlled by *name*, |
| defaulting to *device*. |
| ERST |
| |
| { |
| .name = "nbd_server_remove", |
| .args_type = "force:-f,name:s", |
| .params = "nbd_server_remove [-f] name", |
| .help = "remove an export previously exposed via NBD", |
| .cmd = hmp_nbd_server_remove, |
| }, |
| SRST |
| ``nbd_server_remove [-f]`` *name* |
| Stop exporting a block device through QEMU's NBD server, which was |
| previously started with ``nbd_server_add``. The ``-f`` |
| option forces the server to drop the export immediately even if |
| clients are connected; otherwise the command fails unless there are no |
| clients. |
| ERST |
| |
| { |
| .name = "nbd_server_stop", |
| .args_type = "", |
| .params = "nbd_server_stop", |
| .help = "stop serving block devices using the NBD protocol", |
| .cmd = hmp_nbd_server_stop, |
| }, |
| SRST |
| ``nbd_server_stop`` |
| Stop the QEMU embedded NBD server. |
| ERST |
| |
| |
| #if defined(TARGET_I386) |
| |
| { |
| .name = "mce", |
| .args_type = "broadcast:-b,cpu_index:i,bank:i,status:l,mcg_status:l,addr:l,misc:l", |
| .params = "[-b] cpu bank status mcgstatus addr misc", |
| .help = "inject a MCE on the given CPU [and broadcast to other CPUs with -b option]", |
| .cmd = hmp_mce, |
| }, |
| |
| #endif |
| SRST |
| ``mce`` *cpu* *bank* *status* *mcgstatus* *addr* *misc* |
| Inject an MCE on the given CPU (x86 only). |
| ERST |
| |
| { |
| .name = "getfd", |
| .args_type = "fdname:s", |
| .params = "getfd name", |
| .help = "receive a file descriptor via SCM rights and assign it a name", |
| .cmd = hmp_getfd, |
| }, |
| |
| SRST |
| ``getfd`` *fdname* |
| If a file descriptor is passed alongside this command using the SCM_RIGHTS |
| mechanism on unix sockets, it is stored using the name *fdname* for |
| later use by other monitor commands. |
| ERST |
| |
| { |
| .name = "closefd", |
| .args_type = "fdname:s", |
| .params = "closefd name", |
| .help = "close a file descriptor previously passed via SCM rights", |
| .cmd = hmp_closefd, |
| }, |
| |
| SRST |
| ``closefd`` *fdname* |
| Close the file descriptor previously assigned to *fdname* using the |
| ``getfd`` command. This is only needed if the file descriptor was never |
| used by another monitor command. |
| ERST |
| |
| { |
| .name = "block_set_io_throttle", |
| .args_type = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l", |
| .params = "device bps bps_rd bps_wr iops iops_rd iops_wr", |
| .help = "change I/O throttle limits for a block drive", |
| .cmd = hmp_block_set_io_throttle, |
| }, |
| |
| SRST |
| ``block_set_io_throttle`` *device* *bps* *bps_rd* *bps_wr* *iops* *iops_rd* *iops_wr* |
| Change I/O throttle limits for a block drive to |
| *bps* *bps_rd* *bps_wr* *iops* *iops_rd* *iops_wr*. |
| *device* can be a block device name, a qdev ID or a QOM path. |
| ERST |
| |
| { |
| .name = "set_password", |
| .args_type = "protocol:s,password:s,connected:s?", |
| .params = "protocol password action-if-connected", |
| .help = "set spice/vnc password", |
| .cmd = hmp_set_password, |
| }, |
| |
| SRST |
| ``set_password [ vnc | spice ] password [ action-if-connected ]`` |
| Change spice/vnc password. *action-if-connected* specifies what |
| should happen in case a connection is established: *fail* makes the |
| password change fail. *disconnect* changes the password and |
| disconnects the client. *keep* changes the password and keeps the |
| connection up. *keep* is the default. |
| ERST |
| |
| { |
| .name = "expire_password", |
| .args_type = "protocol:s,time:s", |
| .params = "protocol time", |
| .help = "set spice/vnc password expire-time", |
| .cmd = hmp_expire_password, |
| }, |
| |
| SRST |
| ``expire_password [ vnc | spice ]`` *expire-time* |
| Specify when a password for spice/vnc becomes |
| invalid. *expire-time* accepts: |
| |
| ``now`` |
| Invalidate password instantly. |
| ``never`` |
| Password stays valid forever. |
| ``+``\ *nsec* |
| Password stays valid for *nsec* seconds starting now. |
| *nsec* |
| Password is invalidated at the given time. *nsec* are the seconds |
| passed since 1970, i.e. unix epoch. |
| |
| ERST |
| |
| { |
| .name = "chardev-add", |
| .args_type = "args:s", |
| .params = "args", |
| .help = "add chardev", |
| .cmd = hmp_chardev_add, |
| .command_completion = chardev_add_completion, |
| }, |
| |
| SRST |
| ``chardev-add`` *args* |
| chardev-add accepts the same parameters as the -chardev command line switch. |
| ERST |
| |
| { |
| .name = "chardev-change", |
| .args_type = "id:s,args:s", |
| .params = "id args", |
| .help = "change chardev", |
| .cmd = hmp_chardev_change, |
| }, |
| |
| SRST |
| ``chardev-change`` *args* |
| chardev-change accepts existing chardev *id* and then the same arguments |
| as the -chardev command line switch (except for "id"). |
| ERST |
| |
| { |
| .name = "chardev-remove", |
| .args_type = "id:s", |
| .params = "id", |
| .help = "remove chardev", |
| .cmd = hmp_chardev_remove, |
| .command_completion = chardev_remove_completion, |
| }, |
| |
| SRST |
| ``chardev-remove`` *id* |
| Removes the chardev *id*. |
| ERST |
| |
| { |
| .name = "chardev-send-break", |
| .args_type = "id:s", |
| .params = "id", |
| .help = "send a break on chardev", |
| .cmd = hmp_chardev_send_break, |
| .command_completion = chardev_remove_completion, |
| }, |
| |
| SRST |
| ``chardev-send-break`` *id* |
| Send a break on the chardev *id*. |
| ERST |
| |
| { |
| .name = "qemu-io", |
| .args_type = "qdev:-d,device:B,command:s", |
| .params = "[-d] [device] \"[command]\"", |
| .help = "run a qemu-io command on a block device\n\t\t\t" |
| "-d: [device] is a device ID rather than a " |
| "drive ID or node name", |
| .cmd = hmp_qemu_io, |
| }, |
| |
| SRST |
| ``qemu-io`` *device* *command* |
| Executes a qemu-io command on the given block device. |
| ERST |
| |
| { |
| .name = "qom-list", |
| .args_type = "path:s?", |
| .params = "path", |
| .help = "list QOM properties", |
| .cmd = hmp_qom_list, |
| .flags = "p", |
| }, |
| |
| SRST |
| ``qom-list`` [*path*] |
| Print QOM properties of object at location *path* |
| ERST |
| |
| { |
| .name = "qom-get", |
| .args_type = "path:s,property:s", |
| .params = "path property", |
| .help = "print QOM property", |
| .cmd = hmp_qom_get, |
| .flags = "p", |
| }, |
| |
| SRST |
| ``qom-get`` *path* *property* |
| Print QOM property *property* of object at location *path* |
| ERST |
| |
| { |
| .name = "qom-set", |
| .args_type = "json:-j,path:s,property:s,value:S", |
| .params = "[-j] path property value", |
| .help = "set QOM property.\n\t\t\t" |
| "-j: the value is specified in json format.", |
| .cmd = hmp_qom_set, |
| .flags = "p", |
| }, |
| |
| SRST |
| ``qom-set`` *path* *property* *value* |
| Set QOM property *property* of object at location *path* to value *value* |
| ERST |
| |
| { |
| .name = "replay_break", |
| .args_type = "icount:l", |
| .params = "icount", |
| .help = "set breakpoint at the specified instruction count", |
| .cmd = hmp_replay_break, |
| }, |
| |
| SRST |
| ``replay_break`` *icount* |
| Set replay breakpoint at instruction count *icount*. |
| Execution stops when the specified instruction is reached. |
| There can be at most one breakpoint. When breakpoint is set, any prior |
| one is removed. The breakpoint may be set only in replay mode and only |
| "in the future", i.e. at instruction counts greater than the current one. |
| The current instruction count can be observed with ``info replay``. |
| ERST |
| |
| { |
| .name = "replay_delete_break", |
| .args_type = "", |
| .params = "", |
| .help = "remove replay breakpoint", |
| .cmd = hmp_replay_delete_break, |
| }, |
| |
| SRST |
| ``replay_delete_break`` |
| Remove replay breakpoint which was previously set with ``replay_break``. |
| The command is ignored when there are no replay breakpoints. |
| ERST |
| |
| { |
| .name = "replay_seek", |
| .args_type = "icount:l", |
| .params = "icount", |
| .help = "replay execution to the specified instruction count", |
| .cmd = hmp_replay_seek, |
| }, |
| |
| SRST |
| ``replay_seek`` *icount* |
| Automatically proceed to the instruction count *icount*, when |
| replaying the execution. The command automatically loads nearest |
| snapshot and replays the execution to find the desired instruction. |
| When there is no preceding snapshot or the execution is not replayed, |
| then the command fails. |
| *icount* for the reference may be observed with ``info replay`` command. |
| ERST |
| |
| { |
| .name = "info", |
| .args_type = "item:s?", |
| .params = "[subcommand]", |
| .help = "show various information about the system state", |
| .cmd = hmp_info_help, |
| .sub_table = hmp_info_cmds, |
| .flags = "p", |
| }, |
| |
| SRST |
| ``calc_dirty_rate`` *second* |
| Start a round of dirty rate measurement with the period specified in *second*. |
| The result of the dirty rate measurement may be observed with ``info |
| dirty_rate`` command. |
| ERST |
| |
| { |
| .name = "calc_dirty_rate", |
| .args_type = "dirty_ring:-r,dirty_bitmap:-b,second:l,sample_pages_per_GB:l?", |
| .params = "[-r] [-b] second [sample_pages_per_GB]", |
| .help = "start a round of guest dirty rate measurement (using -r to" |
| "\n\t\t\t specify dirty ring as the method of calculation and" |
| "\n\t\t\t -b to specify dirty bitmap as method of calculation)", |
| .cmd = hmp_calc_dirty_rate, |
| }, |